}
}
}
+
+# Simple test for --print-opcodes (list of supported opcodes)
+# We don't check the list result but just the syntax and the
+# number it
+proc gas_m68hc11_opcode_list { flags expect_count } {
+ global comp_output
+
+ set testname "Opcode list generation \[$flags\]"
+ gas_run "x.s" "--print-opcodes $flags" ""
+
+ set lines [split $comp_output "\n"]
+ set cnt [llength $lines]
+ verbose -log "Found $cnt opcodes"
+ if { $cnt == $expect_count } then {
+ pass $testname
+ } else {
+ fail $testname
+ }
+}
+
+gas_m68hc11_opcode_list "-m68hc11" 149
+gas_m68hc11_opcode_list "-m68hc12" 192
+
+
+# Test for a message produced when assembling a file
+proc gas_m68hc11_message { kind options line expect } {
+ global srcdir
+ global subdir
+
+ regsub -all "\n" "$line: $expect" " " title
+
+ # Make a file containing the instructions to assemble.
+ set fd [open "$srcdir/$subdir/tst-m68hc1x.s" "w"];
+ puts -nonewline $fd "$line"
+ close $fd
+
+ verbose -log "Test: $title"
+ gas_start "tst-m68hc1x.s" "$options"
+ set ok 0
+ while 1 {
+ expect {
+ -re ".*: Assembler messages:\n" { }
+ -re ".*1: $kind: $expect" { incr ok; break }
+ timeout { perror "timeout\n"; break }
+ eof { verbose "EOF from gas"; break }
+ }
+ }
+ #sleep 1 # Uncomment this line when using gcov
+ gas_finish
+ if { $ok > 0 } then {
+ pass $title
+ } else {
+ fail $title
+ }
+ catch "exec rm -f $srcdir/$subdir/tst-m68hc1x.s"
+}
+
+# Test for an error message produced by gas
+proc gas_m68hc11_error { options line expect } {
+ gas_m68hc11_message "Error" $options $line $expect
+}
+
+# Test for a warning message produced by gas
+proc gas_m68hc11_warning { options line expect } {
+ gas_m68hc11_message "Warning" $options $line $expect
+}
+
+# ------------------
+# 68HC11 error tests
+gas_m68hc11_error "" "puld\n" "Opcode .puld. is not recognized"
+gas_m68hc11_error "" "ldab\n" "Invalid operand for .ldab."
+gas_m68hc11_error "" "ldab 256,x\n" "Operand out of 8-bit range:.*256"
+gas_m68hc11_error "" "ldab 257,y\n" "Operand out of 8-bit range:.*257"
+gas_m68hc11_error "" "ldab -1,y\n" "Operand out of 8-bit range:.*-1"
+gas_m68hc11_error "" "ldab bar,y\nbar=300" "value of 300 too large for field of 1 byte"
+gas_m68hc11_error "" "jmp \#23\n" "Immediate operand is not allowed"
+gas_m68hc11_error "" "ldab \[d,pc\]\n" "Indirect indexed addressing is not valid for 68HC11"
+gas_m68hc11_error "" "ldab ,t\n" "Spurious .,. or bad indirect register"
+gas_m68hc11_error "" "ldab 1,t\n" "Garbage at end of instruction:.*,t"
+gas_m68hc11_error "" "ldab 1,,x\n" "Garbage at end of instruction:.*,x"
+gas_m68hc11_error "" "ldab 1,+x\n" "Pre-increment mode is not valid"
+gas_m68hc11_error "" "ldab 1,-x\n" "Pre-increment mode is not valid"
+gas_m68hc11_error "" "ldab 1,x+\n" "Post-increment mode is not valid"
+gas_m68hc11_error "" "ldab 1,x-\n" "Post-decrement mode is not valid"
+gas_m68hc11_error "" "ldd \#65536\n" "Operand out of 16-bit range"
+gas_m68hc11_error "--short-branchs" "bne 200\n" \
+ "Operand out of range for a relative branch"
+gas_m68hc11_error "" "bar\n" "Opcode .bar. is not recognized."
+gas_m68hc11_error "--print-insn-syntax" "bne\n" \
+ "Instruction formats for .bne..*"
+
+# ------------------
+# 68HC12 error tests
+gas_m68hc11_error "-m68hc12" "ldab x,y\n" "Invalid accumulator register"
+gas_m68hc11_error "-m68hc12" "ldab \[d,y\n" \
+ "Missing .\]. to close indexed-indirect mode"
+gas_m68hc11_error "-m68hc12" "ldab 0,\n" "Garbage at end of instruction: .,."
+gas_m68hc11_error "-m68hc12" "ldab \[d\]\n" \
+ "Missing second register or offset for indexed-indirect mode"
+gas_m68hc11_error "-m68hc12" "ldab \[d x\]\n" \
+ "Missing second register for indexed-indirect mode"
+gas_m68hc11_error "-m68hc12" "ldab \[d d\]\n" \
+ "Missing second register for indexed-indirect mode"
+gas_m68hc11_error "-m68hc12" "ldab \[pc d\]\n" \
+ "Missing second register for indexed-indirect mode"
+gas_m68hc11_error "-m68hc12" "ldab 65536,x\n" \
+ "Offset out of 16-bit range:"
+gas_m68hc11_error "-m68hc12 -S" "ibeq d,500\n" \
+ "Operand out of range for a relative branch"
+gas_m68hc11_error "-m68hc12" "ibeq pc,3\n" \
+ "Invalid register for dbcc/tbcc instruction"
+gas_m68hc11_error "-m68hc12 -S" "ibeq pc,500\n" \
+ "Invalid register for dbcc/tbcc instruction"
+gas_m68hc11_error "-m68hc12" "orab 9,+x\n" \
+ "Increment/decrement value is out of range"
+gas_m68hc11_error "-m68hc12" "orab -9,x-\n" \
+ "Increment/decrement value is out of range"
+gas_m68hc11_error "-m68hc12" "orab -3,-pc\n" \
+ "Invalid register for post/pre increment"
+gas_m68hc11_error "-m68hc12" "trap \#0\n" "Trap id .0. is out of range"
+gas_m68hc11_error "-m68hc12" "trap \#300\n" "Trap id .300. is out of range"
+gas_m68hc11_error "-m68hc12" "trap \#bar\n" "The trap id must be a constant"
+gas_m68hc11_error "-m68hc12" "sex x,d\n" \
+ "Invalid source register for this instruction, use .tfr."
+gas_m68hc11_error "-m68hc12" "tfr pc,a\n" "Invalid source register"
+gas_m68hc11_error "-m68hc12" "movb 200,x,3,y\n" \
+ "Offset out of 5-bit range for movw/movb insn: 200"
+gas_m68hc11_error "-m68hc12" "movb 2,x,300,y\n" \
+ "Offset out of 5-bit range for movw/movb insn: 300"
+
+# ------------------
+# Specific commands
+gas_m68hc11_warning "" ".mode \"bar\"\n" "Invalid mode: .bar."
+gas_m68hc11_error "" ".relax 23\n" "bad .relax format"
+gas_m68hc11_error "" ".relax bar-23\n" "bad .relax format"
+gas_m68hc11_warning "" ".far bar bar\n" "rest of line ignored"
+
+
run_dump_test insns
run_dump_test lbranch
run_dump_test all_insns
projects / binutils-gdb.git / commitdiff