formerly used them. The JUMP_LABEL info is sometimes looked
at by later passes.
- Optionally, cross-jumping can be done. Currently it is done
- only the last time (when after reload and before final).
- In fact, the code for cross-jumping now assumes that register
- allocation has been done, since it uses `rtx_renumbered_equal_p'.
-
Jump optimization is done after cse when cse's constant-propagation
causes jumps to become unconditional or to be deleted.
static int max_jump_chain;
-/* Indicates whether death notes are significant in cross jump analysis.
- Normally they are not significant, because of A and B jump to C,
- and R dies in A, it must die in B. But this might not be true after
- stack register conversion, and we must compare death notes in that
- case. */
-
-static int cross_jump_death_matters = 0;
-
static int init_label_info PARAMS ((rtx));
static void delete_barrier_successors PARAMS ((rtx));
-static void mark_all_labels PARAMS ((rtx, int));
+static void mark_all_labels PARAMS ((rtx));
static rtx delete_unreferenced_labels PARAMS ((rtx));
static void delete_noop_moves PARAMS ((rtx));
static int duplicate_loop_exit_test PARAMS ((rtx));
-static void find_cross_jump PARAMS ((rtx, rtx, int, rtx *, rtx *));
-static void do_cross_jump PARAMS ((rtx, rtx, rtx));
-static int jump_back_p PARAMS ((rtx, rtx));
static int tension_vector_labels PARAMS ((rtx, int));
static void delete_computation PARAMS ((rtx));
static void redirect_exp_1 PARAMS ((rtx *, rtx, rtx, rtx));
static int delete_labelref_insn PARAMS ((rtx, rtx, int));
static void mark_modified_reg PARAMS ((rtx, rtx, void *));
static void redirect_tablejump PARAMS ((rtx, rtx));
-static void jump_optimize_1 PARAMS ((rtx, int, int, int, int, int));
+static void jump_optimize_1 PARAMS ((rtx, int, int, int, int));
static int returnjump_p_1 PARAMS ((rtx *, void *));
static void delete_prior_computation PARAMS ((rtx, rtx));
\f
/* Main external entry point into the jump optimizer. See comments before
jump_optimize_1 for descriptions of the arguments. */
void
-jump_optimize (f, cross_jump, noop_moves, after_regscan)
+jump_optimize (f, noop_moves, after_regscan)
rtx f;
- int cross_jump;
int noop_moves;
int after_regscan;
{
- jump_optimize_1 (f, cross_jump, noop_moves, after_regscan, 0, 0);
+ jump_optimize_1 (f, noop_moves, after_regscan, 0, 0);
}
/* Alternate entry into the jump optimizer. This entry point only rebuilds
rebuild_jump_labels (f)
rtx f;
{
- jump_optimize_1 (f, 0, 0, 0, 1, 0);
+ jump_optimize_1 (f, 0, 0, 1, 0);
}
/* Alternate entry into the jump optimizer. Do only trivial optimizations. */
jump_optimize_minimal (f)
rtx f;
{
- jump_optimize_1 (f, 0, 0, 0, 0, 1);
+ jump_optimize_1 (f, 0, 0, 0, 1);
}
\f
/* Delete no-op jumps and optimize jumps to jumps
and jumps around jumps.
Delete unused labels and unreachable code.
- If CROSS_JUMP is 1, detect matching code
- before a jump and its destination and unify them.
- If CROSS_JUMP is 2, do cross-jumping, but pay attention to death notes.
-
If NOOP_MOVES is nonzero, delete no-op move insns.
If AFTER_REGSCAN is nonzero, then this jump pass is being run immediately
*/
static void
-jump_optimize_1 (f, cross_jump, noop_moves, after_regscan,
+jump_optimize_1 (f, noop_moves, after_regscan,
mark_labels_only, minimal)
rtx f;
- int cross_jump;
int noop_moves;
int after_regscan;
int mark_labels_only;
enum rtx_code reversed_code;
#endif
- cross_jump_death_matters = (cross_jump == 2);
max_uid = init_label_info (f) + 1;
/* Leave some extra room for labels and duplicate exit test insns
max_jump_chain = max_uid * 14 / 10;
jump_chain = (rtx *) xcalloc (max_jump_chain, sizeof (rtx));
- mark_all_labels (f, cross_jump);
+ mark_all_labels (f);
/* Keep track of labels used from static data; we don't track them
closely enough to delete them here, so make sure their reference
}
}
#endif
- else
- {
- /* Now that the jump has been tensioned,
- try cross jumping: check for identical code
- before the jump and before its target label. */
-
- /* First, cross jumping of conditional jumps: */
-
- if (cross_jump && condjump_p (insn))
- {
- rtx newjpos, newlpos;
- rtx x = prev_real_insn (JUMP_LABEL (insn));
-
- /* A conditional jump may be crossjumped
- only if the place it jumps to follows
- an opposing jump that comes back here. */
-
- if (x != 0 && ! jump_back_p (x, insn))
- /* We have no opposing jump;
- cannot cross jump this insn. */
- x = 0;
-
- newjpos = 0;
- /* TARGET is nonzero if it is ok to cross jump
- to code before TARGET. If so, see if matches. */
- if (x != 0)
- find_cross_jump (insn, x, 2,
- &newjpos, &newlpos);
-
- if (newjpos != 0)
- {
- do_cross_jump (insn, newjpos, newlpos);
- /* Make the old conditional jump
- into an unconditional one. */
- PATTERN (insn) = gen_jump (JUMP_LABEL (insn));
- INSN_CODE (insn) = -1;
- emit_barrier_after (insn);
- /* Add to jump_chain unless this is a new label
- whose UID is too large. */
- if (INSN_UID (JUMP_LABEL (insn)) < max_jump_chain)
- {
- jump_chain[INSN_UID (insn)]
- = jump_chain[INSN_UID (JUMP_LABEL (insn))];
- jump_chain[INSN_UID (JUMP_LABEL (insn))] = insn;
- }
- changed = 1;
- next = insn;
- }
- }
-
- /* Cross jumping of unconditional jumps:
- a few differences. */
-
- if (cross_jump && simplejump_p (insn))
- {
- rtx newjpos, newlpos;
- rtx target;
-
- newjpos = 0;
-
- /* TARGET is nonzero if it is ok to cross jump
- to code before TARGET. If so, see if matches. */
- find_cross_jump (insn, JUMP_LABEL (insn), 1,
- &newjpos, &newlpos);
-
- /* If cannot cross jump to code before the label,
- see if we can cross jump to another jump to
- the same label. */
- /* Try each other jump to this label. */
- if (INSN_UID (JUMP_LABEL (insn)) < max_uid)
- for (target = jump_chain[INSN_UID (JUMP_LABEL (insn))];
- target != 0 && newjpos == 0;
- target = jump_chain[INSN_UID (target)])
- if (target != insn
- && JUMP_LABEL (target) == JUMP_LABEL (insn)
- /* Ignore TARGET if it's deleted. */
- && ! INSN_DELETED_P (target))
- find_cross_jump (insn, target, 2,
- &newjpos, &newlpos);
-
- if (newjpos != 0)
- {
- do_cross_jump (insn, newjpos, newlpos);
- changed = 1;
- next = insn;
- }
- }
-
- /* This code was dead in the previous jump.c! */
- if (cross_jump && GET_CODE (PATTERN (insn)) == RETURN)
- {
- /* Return insns all "jump to the same place"
- so we can cross-jump between any two of them. */
-
- rtx newjpos, newlpos, target;
-
- newjpos = 0;
-
- /* If cannot cross jump to code before the label,
- see if we can cross jump to another jump to
- the same label. */
- /* Try each other jump to this label. */
- for (target = jump_chain[0];
- target != 0 && newjpos == 0;
- target = jump_chain[INSN_UID (target)])
- if (target != insn
- && ! INSN_DELETED_P (target)
- && GET_CODE (PATTERN (target)) == RETURN)
- find_cross_jump (insn, target, 2,
- &newjpos, &newlpos);
-
- if (newjpos != 0)
- {
- do_cross_jump (insn, newjpos, newlpos);
- changed = 1;
- next = insn;
- }
- }
- }
}
first = 0;
For each label, make a chain (using `jump_chain')
of all the *unconditional* jumps that jump to it;
- also make a chain of all returns.
-
- CROSS_JUMP indicates whether we are doing cross jumping
- and if we are whether we will be paying attention to
- death notes or not. */
+ also make a chain of all returns. */
static void
-mark_all_labels (f, cross_jump)
+mark_all_labels (f)
rtx f;
- int cross_jump;
{
rtx insn;
if (GET_CODE (insn) == CALL_INSN
&& GET_CODE (PATTERN (insn)) == CALL_PLACEHOLDER)
{
- mark_all_labels (XEXP (PATTERN (insn), 0), cross_jump);
- mark_all_labels (XEXP (PATTERN (insn), 1), cross_jump);
- mark_all_labels (XEXP (PATTERN (insn), 2), cross_jump);
+ mark_all_labels (XEXP (PATTERN (insn), 0));
+ mark_all_labels (XEXP (PATTERN (insn), 1));
+ mark_all_labels (XEXP (PATTERN (insn), 2));
/* Canonicalize the tail recursion label attached to the
CALL_PLACEHOLDER insn. */
{
rtx label_ref = gen_rtx_LABEL_REF (VOIDmode,
XEXP (PATTERN (insn), 3));
- mark_jump_label (label_ref, insn, cross_jump, 0);
+ mark_jump_label (label_ref, insn, 0);
XEXP (PATTERN (insn), 3) = XEXP (label_ref, 0);
}
continue;
}
- mark_jump_label (PATTERN (insn), insn, cross_jump, 0);
+ mark_jump_label (PATTERN (insn), insn, 0);
if (! INSN_DELETED_P (insn) && GET_CODE (insn) == JUMP_INSN)
{
/* When we know the LABEL_REF contained in a REG used in
rtx label_ref = gen_rtx_LABEL_REF (VOIDmode,
XEXP (label_note, 0));
- mark_jump_label (label_ref, insn, cross_jump, 0);
+ mark_jump_label (label_ref, insn, 0);
XEXP (label_note, 0) = XEXP (label_ref, 0);
JUMP_LABEL (insn) = XEXP (label_note, 0);
}
if (reg_map)
replace_regs (PATTERN (copy), reg_map, max_reg, 1);
- mark_jump_label (PATTERN (copy), copy, 0, 0);
+ mark_jump_label (PATTERN (copy), copy, 0);
/* Copy all REG_NOTES except REG_LABEL since mark_jump_label will
make them. */
loop_start);
if (reg_map)
replace_regs (PATTERN (copy), reg_map, max_reg, 1);
- mark_jump_label (PATTERN (copy), copy, 0, 0);
+ mark_jump_label (PATTERN (copy), copy, 0);
if (REG_NOTES (insn))
{
REG_NOTES (copy) = copy_insn_1 (REG_NOTES (insn));
if (! first_copy)
first_copy = copy;
- mark_jump_label (PATTERN (copy), copy, 0, 0);
+ mark_jump_label (PATTERN (copy), copy, 0);
if (INSN_UID (copy) < max_jump_chain
&& INSN_UID (JUMP_LABEL (copy)) < max_jump_chain)
{
return start;
}
\f
-/* Compare the instructions before insn E1 with those before E2
- to find an opportunity for cross jumping.
- (This means detecting identical sequences of insns followed by
- jumps to the same place, or followed by a label and a jump
- to that label, and replacing one with a jump to the other.)
-
- Assume E1 is a jump that jumps to label E2
- (that is not always true but it might as well be).
- Find the longest possible equivalent sequences
- and store the first insns of those sequences into *F1 and *F2.
- Store zero there if no equivalent preceding instructions are found.
-
- We give up if we find a label in stream 1.
- Actually we could transfer that label into stream 2. */
-
-static void
-find_cross_jump (e1, e2, minimum, f1, f2)
- rtx e1, e2;
- int minimum;
- rtx *f1, *f2;
-{
- register rtx i1 = e1, i2 = e2;
- register rtx p1, p2;
- int lose = 0;
-
- rtx last1 = 0, last2 = 0;
- rtx afterlast1 = 0, afterlast2 = 0;
-
- *f1 = 0;
- *f2 = 0;
-
- while (1)
- {
- i1 = prev_nonnote_insn (i1);
-
- i2 = PREV_INSN (i2);
- while (i2 && (GET_CODE (i2) == NOTE || GET_CODE (i2) == CODE_LABEL))
- i2 = PREV_INSN (i2);
-
- if (i1 == 0)
- break;
-
- /* Don't allow the range of insns preceding E1 or E2
- to include the other (E2 or E1). */
- if (i2 == e1 || i1 == e2)
- break;
-
- /* If we will get to this code by jumping, those jumps will be
- tensioned to go directly to the new label (before I2),
- so this cross-jumping won't cost extra. So reduce the minimum. */
- if (GET_CODE (i1) == CODE_LABEL)
- {
- --minimum;
- break;
- }
-
- if (i2 == 0 || GET_CODE (i1) != GET_CODE (i2))
- break;
-
- p1 = PATTERN (i1);
- p2 = PATTERN (i2);
-
- /* If this is a CALL_INSN, compare register usage information.
- If we don't check this on stack register machines, the two
- CALL_INSNs might be merged leaving reg-stack.c with mismatching
- numbers of stack registers in the same basic block.
- If we don't check this on machines with delay slots, a delay slot may
- be filled that clobbers a parameter expected by the subroutine.
-
- ??? We take the simple route for now and assume that if they're
- equal, they were constructed identically. */
-
- if (GET_CODE (i1) == CALL_INSN
- && ! rtx_equal_p (CALL_INSN_FUNCTION_USAGE (i1),
- CALL_INSN_FUNCTION_USAGE (i2)))
- lose = 1;
-
-#ifdef STACK_REGS
- /* If cross_jump_death_matters is not 0, the insn's mode
- indicates whether or not the insn contains any stack-like
- regs. */
-
- if (!lose && cross_jump_death_matters && stack_regs_mentioned (i1))
- {
- /* If register stack conversion has already been done, then
- death notes must also be compared before it is certain that
- the two instruction streams match. */
-
- rtx note;
- HARD_REG_SET i1_regset, i2_regset;
-
- CLEAR_HARD_REG_SET (i1_regset);
- CLEAR_HARD_REG_SET (i2_regset);
-
- for (note = REG_NOTES (i1); note; note = XEXP (note, 1))
- if (REG_NOTE_KIND (note) == REG_DEAD
- && STACK_REG_P (XEXP (note, 0)))
- SET_HARD_REG_BIT (i1_regset, REGNO (XEXP (note, 0)));
-
- for (note = REG_NOTES (i2); note; note = XEXP (note, 1))
- if (REG_NOTE_KIND (note) == REG_DEAD
- && STACK_REG_P (XEXP (note, 0)))
- SET_HARD_REG_BIT (i2_regset, REGNO (XEXP (note, 0)));
-
- GO_IF_HARD_REG_EQUAL (i1_regset, i2_regset, done);
-
- lose = 1;
-
- done:
- ;
- }
-#endif
-
- /* Don't allow old-style asm or volatile extended asms to be accepted
- for cross jumping purposes. It is conceptually correct to allow
- them, since cross-jumping preserves the dynamic instruction order
- even though it is changing the static instruction order. However,
- if an asm is being used to emit an assembler pseudo-op, such as
- the MIPS `.set reorder' pseudo-op, then the static instruction order
- matters and it must be preserved. */
- if (GET_CODE (p1) == ASM_INPUT || GET_CODE (p2) == ASM_INPUT
- || (GET_CODE (p1) == ASM_OPERANDS && MEM_VOLATILE_P (p1))
- || (GET_CODE (p2) == ASM_OPERANDS && MEM_VOLATILE_P (p2)))
- lose = 1;
-
- if (lose || GET_CODE (p1) != GET_CODE (p2)
- || ! rtx_renumbered_equal_p (p1, p2))
- {
- /* The following code helps take care of G++ cleanups. */
- rtx equiv1;
- rtx equiv2;
-
- if (!lose && GET_CODE (p1) == GET_CODE (p2)
- && ((equiv1 = find_reg_note (i1, REG_EQUAL, NULL_RTX)) != 0
- || (equiv1 = find_reg_note (i1, REG_EQUIV, NULL_RTX)) != 0)
- && ((equiv2 = find_reg_note (i2, REG_EQUAL, NULL_RTX)) != 0
- || (equiv2 = find_reg_note (i2, REG_EQUIV, NULL_RTX)) != 0)
- /* If the equivalences are not to a constant, they may
- reference pseudos that no longer exist, so we can't
- use them. */
- && CONSTANT_P (XEXP (equiv1, 0))
- && rtx_equal_p (XEXP (equiv1, 0), XEXP (equiv2, 0)))
- {
- rtx s1 = single_set (i1);
- rtx s2 = single_set (i2);
- if (s1 != 0 && s2 != 0
- && rtx_renumbered_equal_p (SET_DEST (s1), SET_DEST (s2)))
- {
- validate_change (i1, &SET_SRC (s1), XEXP (equiv1, 0), 1);
- validate_change (i2, &SET_SRC (s2), XEXP (equiv2, 0), 1);
- if (! rtx_renumbered_equal_p (p1, p2))
- cancel_changes (0);
- else if (apply_change_group ())
- goto win;
- }
- }
-
- /* Insns fail to match; cross jumping is limited to the following
- insns. */
-
-#ifdef HAVE_cc0
- /* Don't allow the insn after a compare to be shared by
- cross-jumping unless the compare is also shared.
- Here, if either of these non-matching insns is a compare,
- exclude the following insn from possible cross-jumping. */
- if (sets_cc0_p (p1) || sets_cc0_p (p2))
- last1 = afterlast1, last2 = afterlast2, ++minimum;
-#endif
-
- /* If cross-jumping here will feed a jump-around-jump
- optimization, this jump won't cost extra, so reduce
- the minimum. */
- if (GET_CODE (i1) == JUMP_INSN
- && JUMP_LABEL (i1)
- && prev_real_insn (JUMP_LABEL (i1)) == e1)
- --minimum;
- break;
- }
-
- win:
- if (GET_CODE (p1) != USE && GET_CODE (p1) != CLOBBER)
- {
- /* Ok, this insn is potentially includable in a cross-jump here. */
- afterlast1 = last1, afterlast2 = last2;
- last1 = i1, last2 = i2, --minimum;
- }
- }
-
- if (minimum <= 0 && last1 != 0 && last1 != e1)
- *f1 = last1, *f2 = last2;
-}
-
-static void
-do_cross_jump (insn, newjpos, newlpos)
- rtx insn, newjpos, newlpos;
-{
- /* Find an existing label at this point
- or make a new one if there is none. */
- register rtx label = get_label_before (newlpos);
-
- /* Make the same jump insn jump to the new point. */
- if (GET_CODE (PATTERN (insn)) == RETURN)
- {
- /* Remove from jump chain of returns. */
- delete_from_jump_chain (insn);
- /* Change the insn. */
- PATTERN (insn) = gen_jump (label);
- INSN_CODE (insn) = -1;
- JUMP_LABEL (insn) = label;
- LABEL_NUSES (label)++;
- /* Add to new the jump chain. */
- if (INSN_UID (label) < max_jump_chain
- && INSN_UID (insn) < max_jump_chain)
- {
- jump_chain[INSN_UID (insn)] = jump_chain[INSN_UID (label)];
- jump_chain[INSN_UID (label)] = insn;
- }
- }
- else
- redirect_jump (insn, label, 1);
-
- /* Delete the matching insns before the jump. Also, remove any REG_EQUAL
- or REG_EQUIV note in the NEWLPOS stream that isn't also present in
- the NEWJPOS stream. */
-
- while (newjpos != insn)
- {
- rtx lnote;
-
- for (lnote = REG_NOTES (newlpos); lnote; lnote = XEXP (lnote, 1))
- if ((REG_NOTE_KIND (lnote) == REG_EQUAL
- || REG_NOTE_KIND (lnote) == REG_EQUIV)
- && ! find_reg_note (newjpos, REG_EQUAL, XEXP (lnote, 0))
- && ! find_reg_note (newjpos, REG_EQUIV, XEXP (lnote, 0)))
- remove_note (newlpos, lnote);
-
- delete_insn (newjpos);
- newjpos = next_real_insn (newjpos);
- newlpos = next_real_insn (newlpos);
- }
-}
-\f
/* Return the label before INSN, or put a new label there. */
rtx
return label;
}
\f
-/* Return 1 if INSN is a jump that jumps to right after TARGET
- only on the condition that TARGET itself would drop through.
- Assumes that TARGET is a conditional jump. */
-
-static int
-jump_back_p (insn, target)
- rtx insn, target;
-{
- rtx cinsn, ctarget;
- enum rtx_code codei, codet;
- rtx set, tset;
-
- if (! any_condjump_p (insn)
- || any_uncondjump_p (target)
- || target != prev_real_insn (JUMP_LABEL (insn)))
- return 0;
- set = pc_set (insn);
- tset = pc_set (target);
-
- cinsn = XEXP (SET_SRC (set), 0);
- ctarget = XEXP (SET_SRC (tset), 0);
-
- codei = GET_CODE (cinsn);
- codet = GET_CODE (ctarget);
-
- if (XEXP (SET_SRC (set), 1) == pc_rtx)
- {
- codei = reversed_comparison_code (cinsn, insn);
- if (codei == UNKNOWN)
- return 0;
- }
-
- if (XEXP (SET_SRC (tset), 2) == pc_rtx)
- {
- codet = reversed_comparison_code (ctarget, target);
- if (codei == UNKNOWN)
- return 0;
- }
-
- return (codei == codet
- && rtx_renumbered_equal_p (XEXP (cinsn, 0), XEXP (ctarget, 0))
- && rtx_renumbered_equal_p (XEXP (cinsn, 1), XEXP (ctarget, 1)));
-}
-\f
/* Given a comparison (CODE ARG0 ARG1), inside a insn, INSN, return an code
of reversed comparison if it is possible to do so. Otherwise return UNKNOWN.
UNKNOWN may be returned in case we are having CC_MODE compare and we don't
must be kept distinct if we have not yet done loop-optimization,
because the gap between them is where loop-optimize
will want to move invariant code to. CROSS_JUMP tells us
- that loop-optimization is done with.
-
- Once reload has completed (CROSS_JUMP non-zero), we need not consider
- two labels distinct if they are separated by only USE or CLOBBER insns. */
+ that loop-optimization is done with. */
void
-mark_jump_label (x, insn, cross_jump, in_mem)
+mark_jump_label (x, insn, in_mem)
register rtx x;
rtx insn;
- int cross_jump;
int in_mem;
{
register RTX_CODE code = GET_CODE (x);
/* If this is a constant-pool reference, see if it is a label. */
if (CONSTANT_POOL_ADDRESS_P (x))
- mark_jump_label (get_pool_constant (x), insn, cross_jump, in_mem);
+ mark_jump_label (get_pool_constant (x), insn, in_mem);
break;
case LABEL_REF:
{
if (GET_CODE (next) == CODE_LABEL)
label = next;
- else if (cross_jump && GET_CODE (next) == INSN
- && (GET_CODE (PATTERN (next)) == USE
- || GET_CODE (PATTERN (next)) == CLOBBER))
- continue;
else if (GET_CODE (next) != NOTE)
break;
- else if (! cross_jump
- && (NOTE_LINE_NUMBER (next) == NOTE_INSN_LOOP_BEG
- || NOTE_LINE_NUMBER (next) == NOTE_INSN_FUNCTION_END
- /* ??? Optional. Disables some optimizations, but
- makes gcov output more accurate with -O. */
- || (flag_test_coverage
- && NOTE_LINE_NUMBER (next) > 0)))
+ else if ((NOTE_LINE_NUMBER (next) == NOTE_INSN_LOOP_BEG
+ || NOTE_LINE_NUMBER (next) == NOTE_INSN_FUNCTION_END
+ /* ??? Optional. Disables some optimizations, but
+ makes gcov output more accurate with -O. */
+ || (flag_test_coverage
+ && NOTE_LINE_NUMBER (next) > 0)))
break;
}
int eltnum = code == ADDR_DIFF_VEC ? 1 : 0;
for (i = 0; i < XVECLEN (x, eltnum); i++)
- mark_jump_label (XVECEXP (x, eltnum, i), NULL_RTX,
- cross_jump, in_mem);
+ mark_jump_label (XVECEXP (x, eltnum, i), NULL_RTX, in_mem);
}
return;
for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
{
if (fmt[i] == 'e')
- mark_jump_label (XEXP (x, i), insn, cross_jump, in_mem);
+ mark_jump_label (XEXP (x, i), insn, in_mem);
else if (fmt[i] == 'E')
{
register int j;
for (j = 0; j < XVECLEN (x, i); j++)
- mark_jump_label (XVECEXP (x, i, j), insn, cross_jump, in_mem);
+ mark_jump_label (XVECEXP (x, i, j), insn, in_mem);
}
}
}
DFI_rnreg,
DFI_ce2,
DFI_sched2,
+ DFI_stack,
DFI_bbro,
- DFI_jump2,
DFI_mach,
DFI_dbr,
- DFI_stack,
DFI_MAX
};
Remaining -d letters:
" o q u "
- " H K OPQ TUV YZ"
+ " H JK OPQ TUV YZ"
*/
struct dump_file_info dump_file[DFI_MAX] =
{ "ce2", 'E', 1, 0, 0 },
{ "sched2", 'R', 1, 0, 0 },
{ "bbro", 'B', 1, 0, 0 },
- { "jump2", 'J', 1, 0, 0 },
{ "mach", 'M', 1, 0, 0 },
{ "dbr", 'd', 0, 0, 0 },
{ "stack", 'k', 1, 0, 0 },
optimize = 0;
find_exception_handler_labels ();
- jump_optimize (insns, !JUMP_CROSS_JUMP, !JUMP_NOOP_MOVES,
- !JUMP_AFTER_REGSCAN);
+ jump_optimize (insns, !JUMP_NOOP_MOVES, !JUMP_AFTER_REGSCAN);
optimize = saved_optimize;
}
expected_value_to_br_prob ();
reg_scan (insns, max_reg_num (), 0);
- jump_optimize (insns, !JUMP_CROSS_JUMP, !JUMP_NOOP_MOVES,
- JUMP_AFTER_REGSCAN);
+ jump_optimize (insns, !JUMP_NOOP_MOVES, JUMP_AFTER_REGSCAN);
timevar_pop (TV_JUMP);
if (tem || optimize > 1)
{
timevar_push (TV_JUMP);
- jump_optimize (insns, !JUMP_CROSS_JUMP, !JUMP_NOOP_MOVES,
- !JUMP_AFTER_REGSCAN);
+ jump_optimize (insns, !JUMP_NOOP_MOVES, !JUMP_AFTER_REGSCAN);
timevar_pop (TV_JUMP);
}
{
tem = tem2 = 0;
timevar_push (TV_JUMP);
- jump_optimize (insns, !JUMP_CROSS_JUMP, !JUMP_NOOP_MOVES,
- !JUMP_AFTER_REGSCAN);
+ jump_optimize (insns, !JUMP_NOOP_MOVES, !JUMP_AFTER_REGSCAN);
timevar_pop (TV_JUMP);
if (flag_expensive_optimizations)
delete_trivially_dead_insns (insns, max_reg_num ());
reg_scan (insns, max_reg_num (), 0);
- jump_optimize (insns, !JUMP_CROSS_JUMP,
- !JUMP_NOOP_MOVES, JUMP_AFTER_REGSCAN);
+ jump_optimize (insns, !JUMP_NOOP_MOVES, JUMP_AFTER_REGSCAN);
timevar_push (TV_IFCVT);
if (tem)
{
timevar_push (TV_JUMP);
- jump_optimize (insns, !JUMP_CROSS_JUMP,
- !JUMP_NOOP_MOVES, !JUMP_AFTER_REGSCAN);
+ jump_optimize (insns, !JUMP_NOOP_MOVES, !JUMP_AFTER_REGSCAN);
timevar_pop (TV_JUMP);
}
}
timevar_push (TV_FLOW2);
open_dump_file (DFI_flow2, decl);
- jump_optimize (insns, !JUMP_CROSS_JUMP,
- JUMP_NOOP_MOVES, !JUMP_AFTER_REGSCAN);
+ jump_optimize (insns, JUMP_NOOP_MOVES, !JUMP_AFTER_REGSCAN);
find_basic_blocks (insns, max_reg_num (), rtl_dump_file);
/* On some machines, the prologue and epilogue code, or parts thereof,
close_dump_file (DFI_ce2, print_rtl_with_bb, insns);
timevar_pop (TV_IFCVT2);
}
+#ifdef STACK_REGS
+ if (optimize)
+ split_all_insns (1);
+#endif
#ifdef INSN_SCHEDULING
if (optimize > 0 && flag_schedule_insns_after_reload)
= optimize > 0 && only_leaf_regs_used () && leaf_function_p ();
#endif
+#ifdef STACK_REGS
+ timevar_push (TV_REG_STACK);
+ open_dump_file (DFI_stack, decl);
+
+ reg_to_stack (insns, rtl_dump_file);
+
+ close_dump_file (DFI_stack, print_rtl, insns);
+ timevar_pop (TV_REG_STACK);
+
+ ggc_collect ();
+#endif
if (optimize > 0 && flag_reorder_blocks)
{
timevar_push (TV_REORDER_BLOCKS);
reorder_basic_blocks ();
close_dump_file (DFI_bbro, print_rtl_with_bb, insns);
+ cleanup_cfg (CLEANUP_EXPENSIVE | CLEANUP_POST_REGSTACK);
timevar_pop (TV_REORDER_BLOCKS);
}
- /* One more attempt to remove jumps to .+1 left by dead-store elimination.
- Also do cross-jumping this time and delete no-op move insns. */
-
- if (optimize > 0)
- {
- timevar_push (TV_JUMP);
- open_dump_file (DFI_jump2, decl);
-
- jump_optimize (insns, JUMP_CROSS_JUMP, JUMP_NOOP_MOVES,
- !JUMP_AFTER_REGSCAN);
-
- /* CFG no longer kept up to date. */
-
- close_dump_file (DFI_jump2, print_rtl, insns);
- timevar_pop (TV_JUMP);
- }
-
/* If a machine dependent reorganization is needed, call it. */
#ifdef MACHINE_DEPENDENT_REORG
open_dump_file (DFI_mach, decl);
ggc_collect ();
#endif
+ /* CFG no longer kept up to date. */
+
/* If a scheduling pass for delayed branches is to be done,
call the scheduling code. */
}
#endif
+#if defined (HAVE_ATTR_length) && !defined (STACK_REGS)
timevar_push (TV_SHORTEN_BRANCH);
- if (0
-#ifdef HAVE_ATTR_length
- || 1
-#endif
-#ifdef STACK_REGS
- || 1
-#endif
- )
- split_all_insns (0);
+ split_all_insns (0);
timevar_pop (TV_SHORTEN_BRANCH);
-
-#ifdef STACK_REGS
- timevar_push (TV_REG_STACK);
- open_dump_file (DFI_stack, decl);
-
- reg_to_stack (insns, rtl_dump_file);
-
- close_dump_file (DFI_stack, print_rtl, insns);
- timevar_pop (TV_REG_STACK);
-
- ggc_collect ();
#endif
convert_to_eh_region_ranges ();
projects / gcc.git / commitdiff