+Thu Sep 9 10:18:29 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * remote-udi.c (udi_wait, case UDIStdinNeeded): Use a loop calling
+ getchar() (terminated only on '\n') instead of scanf. Send the
+ '\n' which terminates it to the remote system.
+
+ More gcc lint:
+ * exec.c (ignore): Return 0.
+ * stack.c (return_command): Fetch lazy value directly, not via
+ VALUE_CONTENTS, to avoid "value computed is not used".
+ * inflow.c (new_tty): Move osigttou inside #if.
+
+ * remote.c (remote_fetch_registers): If remote reply is short, just
+ note that fact and keep going (reading extra registers as all bits 0).
+ (remote_store_registers): Send number of registers that were found
+ by remote_fetch_registers.
+ * m68k-tdep.c, config/m68k/tm-m68k.h, config/m68k/tm-*.h: Remove
+ HAVE_68881. Define CANNOT_STORE_REGISTER if ptrace() can't write
+ floating registers.
+ * config/m68k/{tm-m68k-nofp.h,m68k-nofp.mt,tm-m68k-fp.h,m68k-fp.mt}:
+ Remove, replaced by {tm-m68k-em.h,m68k-em.mt}.
+ * Makefile.in, configure.in: Change accordingly.
+
Thu Sep 9 04:59:03 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
* mipsread.c (cross_ref): Allow SGI extended symbol types as cross
reference targets.
- * symmisc.c (print_symbol): Use TYP_TAG_NAME not TYPE_NAME to avoid
+ * symmisc.c (print_symbol): Use TYPE_TAG_NAME not TYPE_NAME to avoid
printing of identities.
Wed Sep 8 19:18:27 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
-/* Generic 68000 stuff, to be included by other tm-*.h files.
- Define HAVE_68881 if that is the case. */
+/* Generic 68000 stuff, to be included by other tm-*.h files. */
-#if defined (HAVE_68881)
#define IEEE_FLOAT 1
-#endif
/* Define the bit, byte, and word ordering of the machine. */
#define TARGET_BYTE_ORDER BIG_ENDIAN
#define REGISTER_TYPE long
-#if defined (HAVE_68881)
-# if defined (GDB_TARGET_IS_SUN3)
- /* Sun3 status includes fpflags, which shows whether the FPU has been used
- by the process, and whether the FPU was done with an instruction or
- was interrupted in the middle of a long instruction. See
- <machine/reg.h>. */
- /* a&d, pc,sr, fp, fpstat, fpflags */
-# define NUM_REGS 31
-# define REGISTER_BYTES (16*4 + 8 + 8*12 + 3*4 + 4)
-# else /* Not sun3. */
-# define NUM_REGS 29
-# define REGISTER_BYTES (16*4 + 8 + 8*12 + 3*4)
-# endif /* Not sun3. */
-#else /* No 68881. */
-# define NUM_REGS 18
-# define REGISTER_BYTES (16*4 + 8)
-#endif /* No 68881. */
+#define REGISTER_BYTES_SUN3 (16*4 + 8 + 8*12 + 3*4 + 4)
+#define REGISTER_BYTES_FP (16*4 + 8 + 8*12 + 3*4)
+#define REGISTER_BYTES_NOFP (16*4 + 8)
+
+#if defined (GDB_TARGET_IS_SUN3)
+ /* Sun3 status includes fpflags, which shows whether the FPU has been used
+ by the process, and whether the FPU was done with an instruction or
+ was interrupted in the middle of a long instruction. See
+ <machine/reg.h>. */
+ /* a&d, pc,sr, fp, fpstat, fpflags */
+# define NUM_REGS 31
+# define REGISTER_BYTES (16*4 + 8 + 8*12 + 3*4 + 4)
+# define REGISTER_BYTES_OK(b) \
+ ((b) == REGISTER_BYTES_SUN3 \
+ || (b) == REGISTER_BYTES_FP \
+ || (b) == REGISTER_BYTES_NOFP)
+#else /* Not sun3. */
+# define NUM_REGS 29
+# define REGISTER_BYTES_OK(b) \
+ ((b) == REGISTER_BYTES_FP \
+ || (b) == REGISTER_BYTES_NOFP)
+# define REGISTER_BYTES (16*4 + 8 + 8*12 + 3*4)
+#endif /* Not sun3. */
/* Index within `registers' of the first byte of the space for
register N. */
-#if defined (HAVE_68881)
#define REGISTER_BYTE(N) \
((N) >= FPC_REGNUM ? (((N) - FPC_REGNUM) * 4) + 168 \
: (N) >= FP0_REGNUM ? (((N) - FP0_REGNUM) * 12) + 72 \
(N) == PC_REGNUM || (N) == FP_REGNUM || (N) == SP_REGNUM ? \
lookup_pointer_type (builtin_type_void) : builtin_type_int)
-#else /* no 68881. */
-/* Index within `registers' of the first byte of the space for
- register N. */
-
-#define REGISTER_BYTE(N) ((N) * 4)
-
-/* Number of bytes of storage in the actual machine representation
- for register N. On the 68000, all regs are 4 bytes. */
-
-#define REGISTER_RAW_SIZE(N) 4
-
-/* Number of bytes of storage in the program's representation
- for register N. On the 68000, all regs are 4 bytes. */
-
-#define REGISTER_VIRTUAL_SIZE(N) 4
-
-/* Largest value REGISTER_RAW_SIZE can have. */
-
-#define MAX_REGISTER_RAW_SIZE 4
-
-/* Largest value REGISTER_VIRTUAL_SIZE can have. */
-
-#define MAX_REGISTER_VIRTUAL_SIZE 4
-
-/* Nonzero if register N requires conversion
- from raw format to virtual format. */
-
-#define REGISTER_CONVERTIBLE(N) 0
-
-/* Convert data from raw format for register REGNUM
- to virtual format for register REGNUM. */
-
-#define REGISTER_CONVERT_TO_VIRTUAL(REGNUM,FROM,TO) memcpy ((TO), (FROM), 4);
-
-/* Convert data from virtual format for register REGNUM
- to raw format for register REGNUM. */
-
-#define REGISTER_CONVERT_TO_RAW(REGNUM,FROM,TO) memcpy ((TO), (FROM), 4);
-
-/* Return the GDB type object for the "standard" data type
- of data in register N. */
-
-#define REGISTER_VIRTUAL_TYPE(N) builtin_type_int
-
-#endif /* No 68881. */
-
/* Initializer for an array of names of registers.
Entries beyond the first NUM_REGS are ignored. */
#define SP_REGNUM 15 /* Contains address of top of stack */
#define PS_REGNUM 16 /* Contains processor status */
#define PC_REGNUM 17 /* Contains program counter */
-#if defined (HAVE_68881)
#define FP0_REGNUM 18 /* Floating point register 0 */
#define FPC_REGNUM 26 /* 68881 control register */
#define FPS_REGNUM 27 /* 68881 status register */
#define FPI_REGNUM 28 /* 68881 iaddr register */
-#endif /* 68881. */
/* Store the address of the place in which to copy the structure the
subroutine will return. This is called from call_function. */
/* The CALL_DUMMY macro is the sequence of instructions, as disassembled
by gdb itself:
+ These instructions exist only so that m68k_find_saved_regs can parse
+ them as a "prologue"; they are never executed.
+
fmovemx fp0-fp7,sp@- 0xf227 0xe0ff
moveml d0-a5,sp@- 0x48e7 0xfffc
clrw sp@- 0x4267
movew ccr,sp@- 0x42e7
- /..* The arguments are pushed at this point by GDB;
- no code is needed in the dummy for this.
- The CALL_DUMMY_START_OFFSET gives the position of
- the following jsr instruction. *../
+ The arguments are pushed at this point by GDB; no code is needed in
+ the dummy for this. The CALL_DUMMY_START_OFFSET gives the position
+ of the following jsr instruction. That is where we start
+ executing.
jsr @#0x32323232 0x4eb9 0x3232 0x3232
addal #0x69696969,sp 0xdffc 0x6969 0x6969
nop 0x4e71
Note this is CALL_DUMMY_LENGTH bytes (28 for the above example).
- We actually start executing at the jsr, since the pushing of the
- registers is done by PUSH_DUMMY_FRAME. If this were real code,
- the arguments for the function called by the jsr would be pushed
- between the moveml and the jsr, and we could allow it to execute through.
- But the arguments have to be pushed by GDB after the PUSH_DUMMY_FRAME is
- done, and we cannot allow the moveml to push the registers again lest
- they be taken for the arguments. */
-#if defined (HAVE_68881)
+ The dummy frame always saves the floating-point registers, whether they
+ actually exist on this target or not. */
+
+/* FIXME: Wrong to hardwire this as BPT_VECTOR when sometimes it
+ should be REMOTE_BPT_VECTOR. We should be using
+ target_insert_breakpoint (but then I think we need
+ target_remove_breakpoint somewhere--easiest way to make this happen
+ is to make this breakpoint a real breakpoint.c type breakpoint). */
#define CALL_DUMMY {0xf227e0ff, 0x48e7fffc, 0x426742e7, 0x4eb93232, 0x3232dffc, 0x69696969, (0x4e404e71 | (BPT_VECTOR << 16))}
#define CALL_DUMMY_LENGTH 28 /* Size of CALL_DUMMY */
#define CALL_DUMMY_START_OFFSET 12 /* Offset to jsr instruction*/
-#else
-
-#define CALL_DUMMY {0x48e7fffc, 0x426742e7, 0x4eb93232, 0x3232dffc, 0x69696969, (0x4e404e71 | (BPT_VECTOR << 16))}
-#define CALL_DUMMY_LENGTH 24 /* Size of CALL_DUMMY */
-#define CALL_DUMMY_START_OFFSET 8 /* Offset to jsr instruction*/
-
-#endif /* HAVE_68881 */
-
/* Insert the specified number of args and function address
into a call sequence of the above form stored at DUMMYNAME.
We use the BFD routines to store a big-endian value of known size. */
projects / binutils-gdb.git / commitdiff