This patch aims to turn 'set print inferior-events' always on, and do
some cleanup on the messages printed by GDB when various inferior
events happen (attach, detach, fork, kill, exit).
To make sure that the patch is correct, I've tested it with a handful
of combinations of 'set follow-fork-mode', 'set detach-on-fork' and
'set print inferior-events'. In the end, I decided to make my
hand-made test into an official testcase. More on that below.
Using the following program as an example:
#include <unistd.h>
int main ()
{
fork ();
return 0;
}
We see the following outputs from the patched GDB:
- With 'set print inferior-events on':
(gdb) r
Starting program: a.out
[Detaching after fork from child process 27749]
[Inferior 1 (process 27745) exited normally]
(gdb)
- With 'set print inferior-events off':
(gdb) r
Starting program: a.out
[Inferior 1 (process 27823) exited normally]
(gdb)
Comparing this against an unpatched GDB:
- With 'set print inferior-events off' and 'set follow-fork-mode
child':
(gdb) r
Starting program: a.out
[Inferior 2 (process 5993) exited normally]
(gdb)
Compare this against an unpatched GDB:
(unpatched-gdb) r
Starting program: a.out
[New process 5702]
[Inferior 2 (process 5702) exited normally]
(unpatched-gdb)
It is possible to notice that, in this scenario, the patched GDB
will lose the '[New process %d]' message.
- With 'set print inferior-events on', 'set follow-fork-mode child'
and 'set detach-on-fork on':
(gdb) r
Starting program: a.out
[Attaching after process 27905 fork to child process 27909]
[New inferior 2 (process 27909)]
[Detaching after fork from parent process 27905]
[Inferior 1 (process 27905) detached]
[Inferior 2 (process 27909) exited normally]
(gdb)
Compare this output with an unpatched GDB, using the same settings:
(unpatched-gdb) r
Starting program: a.out
[New inferior 28033]
[Inferior 28029 detached]
[New process 28033]
[Inferior 2 (process 28033) exited normally]
[Inferior 28033 exited]
(unpatched-gdb)
As can be seen above, I've also made a few modifications to messages
that are printed when 'set print inferior-events' is on. For example,
a few of the messages did not contain the '[' and ']' as
prefix/suffix, which led to a few inconsistencies like:
Attaching after process 22995 fork to child process 22999.
[New inferior 22999]
Detaching after fork from child process 22999.
[Inferior 22995 detached]
[Inferior 2 (process 22999) exited normally]
So I took the opportunity and included the square brackets where
applicable. I have also made the existing messages more uniform, by
always printing "Inferior %d (process %d)..." where applicable. This
makes it easier to identify the inferior number and the PID number
from the messages.
As suggested by Pedro, the "[Inferior %d exited]" message from
'exit_inferior' has been removed, because it got duplicated when
'inferior-events' is on. I'm also using the
'add_{thread,inferior}_silent' versions (instead of their verbose
counterparts) on some locations, also to avoid duplicated messages.
For example, a patched GDB with 'set print inferior-events on', 'set
detach-on-fork on' and 'set follow-fork-mode child', but using
'add_thread', would print:
(gdb) run
Starting program: a.out
[Attaching after process 25088 fork to child process 25092.]
[New inferior 25092] <--- duplicated
[Detaching after fork from child process 25092.]
[Inferior 25088 detached]
[New process 25092] <--- duplicated
[Inferior 2 (process 25092) exited normally]
But if we use 'add_thread_silent' (with the same configuration as
before):
(gdb) run
Starting program: a.out
[Attaching after process 31606 fork to child process 31610]
[New inferior 2 (process 31610)]
[Detaching after fork from parent process 31606]
[Inferior 1 (process 31606) detached]
[Inferior 2 (process 31610) exited normally]
As for the tests, the configuration options being exercised are:
- follow-fork-mode: child/parent
- detach-on-fork: on/off
- print inferior-events: on/off
It was also necessary to perform adjustments on several testcases,
because the expected messages changed considerably.
Built and regtested on BuildBot, without regressions.
gdb/ChangeLog:
2018-04-24 Jan Kratochvil <jan.kratochvil@redhat.com>
Sergio Durigan Junior <sergiodj@redhat.com>
Pedro Alves <palves@redhat.com>
* infcmd.c (kill_command): Print message when inferior has
been killed.
* inferior.c (print_inferior_events): Remove 'static'. Set as
'1'.
(add_inferior): Improve message printed when
'print_inferior_events' is on.
(exit_inferior): Remove message printed when
'print_inferior_events' is on.
(detach_inferior): Improve message printed when
'print_inferior_events' is on.
(initialize_inferiors): Use 'add_inferior_silent' to set
'current_inferior_'.
* inferior.h (print_inferior_events): Declare here as
'extern'.
* infrun.c (follow_fork_inferior): Print '[Attaching...]' or
'[Detaching...]' messages when 'print_inferior_events' is on.
Use 'add_thread_silent' instead of 'add_thread'. Add '[' and ']'
as prefix/suffix for messages. Remove periods. Fix erroneous
'Detaching after fork from child...', replace it by '... from
parent...'.
(handle_vfork_child_exec_or_exit): Add '[' and ']' as
prefix/suffix when printing 'Detaching...' messages. Print
them when 'print_inferior_events' is on.
* remote.c (remote_detach_1): Print message when detaching
from inferior and '!is_fork_parent'.
gdb/testsuite/ChangeLog:
2018-04-24 Jan Kratochvil <jan.kratochvil@redhat.com>
Sergio Durigan Junior <sergiodj@redhat.com>
Pedro Alves <palves@redhat.com>
* gdb.base/attach-non-pgrp-leader.exp: Adjust 'Detaching...'
regexps to expect for '[Inferior ... detached]' as well.
* gdb.base/attach.exp: Likewise.
* gdb.base/catch-syscall.exp (check_for_program_end): Adjust
"gdb_continue_to_end".
(test_catch_syscall_with_wrong_args): Likewise.
* gdb.base/foll-fork.exp: Adjust regexps to match '[' and
']'. Don't set 'verbose' on.
* gdb.base/foll-vfork.exp: Likewise.
* gdb.base/fork-print-inferior-events.c: New file.
* gdb.base/fork-print-inferior-events.exp: New file.
* gdb.base/hook-stop.exp: Adjust regexps to expect for new
'[Inferior ... has been killed]' message.
* gdb.base/kill-after-signal.exp: Likewise.
* gdb.base/solib-overlap.exp: Adjust regexps to expect for new
detach message.
* gdb.threads/kill.exp: Adjust regexps to expect for new kill
message.
* gdb.threads/clone-attach-detach.exp: Adjust 'Detaching...'
regexps to expect for '[Inferior ... detached]' as well.
* gdb.threads/process-dies-while-detaching.exp: Likewise.
+2018-04-24 Jan Kratochvil <jan.kratochvil@redhat.com>
+ Sergio Durigan Junior <sergiodj@redhat.com>
+ Pedro Alves <palves@redhat.com>
+
+ * infcmd.c (kill_command): Print message when inferior has
+ been killed.
+ * inferior.c (print_inferior_events): Remove 'static'. Set as
+ '1'.
+ (add_inferior): Improve message printed when
+ 'print_inferior_events' is on.
+ (exit_inferior): Remove message printed when
+ 'print_inferior_events' is on.
+ (detach_inferior): Improve message printed when
+ 'print_inferior_events' is on.
+ (initialize_inferiors): Use 'add_inferior_silent' to set
+ 'current_inferior_'.
+ * inferior.h (print_inferior_events): Declare here as
+ 'extern'.
+ * infrun.c (follow_fork_inferior): Print '[Attaching...]' or
+ '[Detaching...]' messages when 'print_inferior_events' is on.
+ Use 'add_thread_silent' instead of 'add_thread'. Add '[' and ']'
+ as prefix/suffix for messages. Remove periods. Fix erroneous
+ 'Detaching after fork from child...', replace it by '... from
+ parent...'.
+ (handle_vfork_child_exec_or_exit): Add '[' and ']' as
+ prefix/suffix when printing 'Detaching...' messages. Print
+ them when 'print_inferior_events' is on.
+ * remote.c (remote_detach_1): Print message when detaching
+ from inferior and '!is_fork_parent'.
+
2018-04-24 Tom Tromey <tom@tromey.com>
* cli-out.h: Reindent.
error (_("The program is not being run."));
if (!query (_("Kill the program being debugged? ")))
error (_("Not confirmed."));
+
+ std::string pid_str = target_pid_to_str (inferior_ptid);
+ int infnum = current_inferior ()->num;
+
target_kill ();
+ if (print_inferior_events)
+ printf_unfiltered (_("[Inferior %d (%s) has been killed]\n"),
+ infnum, pid_str.c_str ());
+
/* If we still have other inferiors to debug, then don't mess with
with their threads. */
if (!have_inferiors ())
struct inferior *inferior_list = NULL;
static int highest_inferior_num;
-/* Print notices on inferior events (attach, detach, etc.), set with
- `set print inferior-events'. */
-static int print_inferior_events = 0;
+/* See inferior.h. */
+int print_inferior_events = 1;
/* The Current Inferior. This is a strong reference. I.e., whenever
an inferior is the current inferior, its refcount is
struct inferior *inf = add_inferior_silent (pid);
if (print_inferior_events)
- printf_unfiltered (_("[New inferior %d]\n"), pid);
+ printf_unfiltered (_("[New inferior %d (%s)]\n"),
+ inf->num,
+ target_pid_to_str (pid_to_ptid (pid)));
return inf;
}
struct inferior *inf = find_inferior_pid (pid);
exit_inferior_1 (inf, 0);
-
- if (print_inferior_events)
- printf_unfiltered (_("[Inferior %d exited]\n"), pid);
}
void
exit_inferior_1 (inf, 0);
if (print_inferior_events)
- printf_unfiltered (_("[Inferior %d detached]\n"), pid);
+ printf_unfiltered (_("[Inferior %d (%s) detached]\n"),
+ inf->num,
+ target_pid_to_str (pid_to_ptid (pid)));
}
/* See inferior.h. */
can only allocate an inferior when all those modules have done
that. Do this after initialize_progspace, due to the
current_program_space reference. */
- current_inferior_ = add_inferior (0);
+ current_inferior_ = add_inferior_silent (0);
current_inferior_->incref ();
current_inferior_->pspace = current_program_space;
current_inferior_->aspace = current_program_space->aspace;
extern int stopped_by_random_signal;
+/* Print notices on inferior events (attach, detach, etc.), set with
+ `set print inferior-events'. */
+extern int print_inferior_events;
+
/* STEP_OVER_ALL means step over all subroutine calls.
STEP_OVER_UNDEBUGGABLE means step over calls to undebuggable functions.
STEP_OVER_NONE means don't step over any subroutine calls. */
remove_breakpoints_pid (ptid_get_pid (inferior_ptid));
}
- if (info_verbose || debug_infrun)
+ if (print_inferior_events)
{
/* Ensure that we have a process ptid. */
ptid_t process_ptid = pid_to_ptid (ptid_get_pid (child_ptid));
target_terminal::ours_for_output ();
fprintf_filtered (gdb_stdlog,
- _("Detaching after %s from child %s.\n"),
+ _("[Detaching after %s from child %s]\n"),
has_vforked ? "vfork" : "fork",
target_pid_to_str (process_ptid));
}
scoped_restore_current_pspace_and_thread restore_pspace_thread;
inferior_ptid = child_ptid;
- add_thread (inferior_ptid);
+ add_thread_silent (inferior_ptid);
set_current_inferior (child_inf);
child_inf->symfile_flags = SYMFILE_NO_READ;
struct inferior *parent_inf, *child_inf;
struct program_space *parent_pspace;
- if (info_verbose || debug_infrun)
+ if (print_inferior_events)
{
+ std::string parent_pid = target_pid_to_str (parent_ptid);
+ std::string child_pid = target_pid_to_str (child_ptid);
+
target_terminal::ours_for_output ();
fprintf_filtered (gdb_stdlog,
- _("Attaching after %s %s to child %s.\n"),
- target_pid_to_str (parent_ptid),
+ _("[Attaching after %s %s to child %s]\n"),
+ parent_pid.c_str (),
has_vforked ? "vfork" : "fork",
- target_pid_to_str (child_ptid));
+ child_pid.c_str ());
}
/* Add the new inferior first, so that the target_detach below
}
else if (detach_fork)
{
- if (info_verbose || debug_infrun)
+ if (print_inferior_events)
{
/* Ensure that we have a process ptid. */
- ptid_t process_ptid = pid_to_ptid (ptid_get_pid (child_ptid));
+ ptid_t process_ptid = pid_to_ptid (ptid_get_pid (parent_ptid));
target_terminal::ours_for_output ();
fprintf_filtered (gdb_stdlog,
- _("Detaching after fork from "
- "child %s.\n"),
+ _("[Detaching after fork from "
+ "parent %s]\n"),
target_pid_to_str (process_ptid));
}
informing the solib layer about this new process. */
inferior_ptid = child_ptid;
- add_thread (inferior_ptid);
+ add_thread_silent (inferior_ptid);
set_current_inferior (child_inf);
/* If this is a vfork child, then the address-space is shared
inf->aspace = NULL;
inf->pspace = NULL;
- if (debug_infrun || info_verbose)
+ if (print_inferior_events)
{
+ const char *pidstr
+ = target_pid_to_str (pid_to_ptid (inf->vfork_parent->pid));
+
target_terminal::ours_for_output ();
if (exec)
{
fprintf_filtered (gdb_stdlog,
- _("Detaching vfork parent process "
- "%d after child exec.\n"),
- inf->vfork_parent->pid);
+ _("[Detaching vfork parent %s "
+ "after child exec]\n"), pidstr);
}
else
{
fprintf_filtered (gdb_stdlog,
- _("Detaching vfork parent process "
- "%d after child exit.\n"),
- inf->vfork_parent->pid);
+ _("[Detaching vfork parent %s "
+ "after child exit]\n"), pidstr);
}
}
/* If doing detach-on-fork, we don't mourn, because that will delete
breakpoints that should be available for the followed inferior. */
if (!is_fork_parent)
- target_mourn_inferior (inferior_ptid);
+ {
+ std::string infpid = target_pid_to_str (inferior_ptid);
+
+ target_mourn_inferior (inferior_ptid);
+ if (print_inferior_events)
+ printf_unfiltered (_("[Inferior %d (%s) detached]\n"),
+ inf->num, infpid.c_str ());
+ }
else
{
inferior_ptid = null_ptid;
+2018-04-24 Jan Kratochvil <jan.kratochvil@redhat.com>
+ Sergio Durigan Junior <sergiodj@redhat.com>
+ Pedro Alves <palves@redhat.com>
+
+ * gdb.base/attach-non-pgrp-leader.exp: Adjust 'Detaching...'
+ regexps to expect for '[Inferior ... detached]' as well.
+ * gdb.base/attach.exp: Likewise.
+ * gdb.base/catch-syscall.exp (check_for_program_end): Adjust
+ "gdb_continue_to_end".
+ (test_catch_syscall_with_wrong_args): Likewise.
+ * gdb.base/foll-fork.exp: Adjust regexps to match '[' and
+ ']'. Don't set 'verbose' on.
+ * gdb.base/foll-vfork.exp: Likewise.
+ * gdb.base/fork-print-inferior-events.c: New file.
+ * gdb.base/fork-print-inferior-events.exp: New file.
+ * gdb.base/hook-stop.exp: Adjust regexps to expect for new
+ '[Inferior ... has been killed]' message.
+ * gdb.base/kill-after-signal.exp: Likewise.
+ * gdb.base/solib-overlap.exp: Adjust regexps to expect for new
+ detach message.
+ * gdb.threads/kill.exp: Adjust regexps to expect for new kill
+ message.
+ * gdb.threads/clone-attach-detach.exp: Adjust 'Detaching...'
+ regexps to expect for '[Inferior ... detached]' as well.
+ * gdb.threads/process-dies-while-detaching.exp: Likewise.
+
2018-04-24 Simon Marchi <simon.marchi@ericsson.com>
PR gdb/23104
proc do_test {} {
global binfile
+ global decimal
set test_spawn_id [spawn_wait_for_attach $binfile]
set parent_pid [spawn_id_get_pid $test_spawn_id]
}
gdb_test "detach" \
- "Detaching from program: .*process $parent_pid"
+ "Detaching from program: .*process $parent_pid\r\n\\\[Inferior $decimal \\(.*\\) detached\\\]"
}
# Start over, and attach to the child this time.
gdb_continue_to_breakpoint "marker"
gdb_test "detach" \
- "Detaching from program: .*process $child_pid"
+ "Detaching from program: .*process $child_pid\r\n\\\[Inferior $decimal \\(.*\\) detached\\\]"
}
kill_wait_spawned_process $test_spawn_id
global testfile
global subdir
global timeout
+ global decimal
# Figure out a regular expression that will match the sysroot,
# noting that the default sysroot is "target:", and also noting
# Detach the process.
gdb_test "detach" \
- "Detaching from program: .*$escapedbinfile, process $testpid" \
+ "Detaching from program: .*$escapedbinfile, process $testpid\r\n\\\[Inferior $decimal \\(.*\\) detached\\\]" \
"attach1 detach"
# Wait a bit for gdb to finish detaching
# Deleting the catchpoints
delete_breakpoints
- gdb_continue_to_end
+ gdb_continue_to_end "" continue 1
}
proc test_catch_syscall_without_args {} {
# If it doesn't, everything is right (since we don't have
# a syscall named "mlock" in it). Otherwise, this is a failure.
set thistest "catch syscall with unused syscall ($syscall_name)"
- gdb_continue_to_end $thistest
+ gdb_continue_to_end $thistest continue 1
}
}
# Set up the output we expect to see after we run.
set expected_re ""
if {$who == "child"} {
- set expected_re "Attaching after.* fork to.*"
+ set expected_re "\\\[Attaching after.* fork to.*"
if {$detach == "on"} {
- append expected_re "Detaching after fork from .*"
+ append expected_re "\\\[Detaching after fork from .*"
}
append expected_re "set breakpoint here.*"
} elseif {$who == "parent" && $detach == "on"} {
- set expected_re "Detaching after fork from .*set breakpoint here.*"
+ set expected_re "\\\[Detaching after fork from .*set breakpoint here.*"
} else {
set expected_re ".*set breakpoint here.*"
}
"Temporary breakpoint.*, line $bp_after_fork.*" \
"set follow-fork child, tbreak"
- set expected_re "Attaching after.* fork to.*Detaching after fork from"
+ set expected_re "\\\[Attaching after.* fork to.*\\\[Detaching after fork from"
append expected_re ".* at .*$bp_after_fork.*"
gdb_test "continue" $expected_re "set follow-fork child, hit tbreak"
"set follow-fork parent, tbreak"
gdb_test "continue" \
- "Detaching after fork from.* at .*$bp_after_fork.*" \
+ "\\\[Detaching after fork from.* at .*$bp_after_fork.*" \
"set follow-fork parent, hit tbreak"
# The child has been detached; allow time for any output it might
if [runto_main] then { tcatch_fork_parent_follow }
}
-# The "Detaching..." and "Attaching..." messages may be hidden by
-# default.
-gdb_test_no_output "set verbose"
-
# This is a test of gdb's ability to follow the parent, child or both
# parent and child of a Unix fork() system call.
#
clean_restart $testfile
- # The "Detaching..." and "Attaching..." messages may be hidden by
- # default.
- gdb_test_no_output "set verbose"
-
if ![runto_main] {
return -code return
}
set test "step"
gdb_test_multiple "next" $test {
- -re "Detaching after vfork from.*if \\(pid == 0\\).*$gdb_prompt " {
+ -re "\\\[Detaching after vfork from.*if \\(pid == 0\\).*$gdb_prompt " {
pass $test
}
}
set test "continue to bp"
gdb_test_multiple "continue" $test {
- -re ".*Detaching after vfork from child process.*Breakpoint.*${bp_location}.*$gdb_prompt " {
+ -re ".*\\\[Detaching after vfork from child process.*Breakpoint.*${bp_location}.*$gdb_prompt " {
pass $test
}
}
# PR gdb/14766
fail "$test"
}
- -re "Attaching after.* vfork to.*Detaching vfork parent .* after child exit.*$gdb_prompt " {
+ -re "\\\[Attaching after.* vfork to.*\\\[Detaching vfork parent .* after child exit.*$gdb_prompt " {
pass $test
}
}
set test "continue to bp"
gdb_test_multiple "continue" $test {
- -re "Attaching after.* vfork to.*Detaching vfork parent.*xecuting new program.*Breakpoint.*vforked-prog.c:${linenum}.*$gdb_prompt " {
+ -re "\\\[Attaching after.* vfork to.*\\\[Detaching vfork parent.*xecuting new program.*Breakpoint.*vforked-prog.c:${linenum}.*$gdb_prompt " {
pass $test
}
}
# before it execs. Thus, "next" lands on the next line after
# the vfork.
gdb_test_multiple "next" $test {
- -re "Attaching after .* vfork to child.*if \\(pid == 0\\).*$gdb_prompt " {
+ -re "\\\[Attaching after .* vfork to child.*if \\(pid == 0\\).*$gdb_prompt " {
pass "$test"
}
}
set test "step over vfork"
gdb_test_multiple "next" $test {
- -re "Attaching after .* vfork to child.*if \\(pid == 0\\).*$gdb_prompt " {
+ -re "\\\[Attaching after .* vfork to child.*if \\(pid == 0\\).*$gdb_prompt " {
pass "$test"
}
}
--- /dev/null
+/* This testcase is part of GDB, the GNU debugger.
+
+ Copyright 2007-2018 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+#include <stdlib.h>
+#include <unistd.h>
+
+int
+main (int argc, char *argv[])
+{
+ pid_t child;
+
+ child = fork ();
+ switch (child)
+ {
+ case -1:
+ abort ();
+ case 0:
+ default:
+ break;
+ }
+
+ return 0;
+}
--- /dev/null
+# This testcase is part of GDB, the GNU debugger.
+
+# Copyright 2007-2018 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# Test that the event messages printed when using 'set print
+# inferior-events [on,off]', 'set follow-fork-mode [child,parent]' and
+# 'set detach-on-fork [on,off]' are the correct ones.
+
+# This test relies on "run", so it cannot run on target remote stubs.
+if { [use_gdb_stub] } {
+ untested "not supported on target remote stubs"
+ return
+}
+
+standard_testfile
+
+if { [prepare_for_testing "failed to prepare" $testfile $srcfile debug] } {
+ return -1
+}
+
+# This is the expected output for each of the test combinations
+# below. The order here is important:
+#
+# inferior-events: on; follow-fork: child; detach-on-fork: on
+# inferior-events: on; follow-fork: child; detach-on-fork: off
+# inferior-events: on; follow-fork: parent; detach-on-fork: on
+# inferior-events: on; follow-fork: parent; detach-on-fork: off
+# inferior-events: off; follow-fork: child; detach-on-fork: on
+# inferior-events: off; follow-fork: child; detach-on-fork: off
+# inferior-events: off; follow-fork: parent; detach-on-fork: on
+# inferior-events: off; follow-fork: parent; detach-on-fork: off
+
+set reading_re "(Reading.*from remote target\\.\\.\\.\r\n)*"
+set exited_normally_re "${reading_re}\\\[Inferior $decimal \\(.*\\) exited normally\\\]"
+# gdbserver produces a slightly different message when attaching after
+# a fork, so we have to tweak the regexp to accomodate that.
+set attach_child_re "${reading_re}\\\[Attaching after .* fork to child .*\\\]\r\n"
+set detach_child_re "${reading_re}\\\[Detaching after fork from child .*\\\]\r\n"
+set detach_parent_re "${reading_re}\\\[Detaching after fork from parent .*\\\]\r\n"
+set new_inf_re "${reading_re}\\\[New inferior $decimal \\(.*\\)\\\]\r\n"
+set inf_detached_re "${reading_re}\\\[Inferior $decimal \\(.*\\) detached\\\]\r\n"
+
+set expected_output [list \
+ "${attach_child_re}${new_inf_re}${detach_parent_re}${inf_detached_re}" \
+ "${attach_child_re}${new_inf_re}" \
+ "${detach_child_re}" \
+ "${new_inf_re}" \
+ "" \
+ "" \
+ "" \
+ "" \
+ ]
+
+set i 0
+
+foreach_with_prefix print_inferior_events { "on" "off" } {
+ foreach_with_prefix follow_fork_mode { "child" "parent" } {
+ foreach_with_prefix detach_on_fork { "on" "off" } {
+ clean_restart $binfile
+ gdb_test_no_output "set print inferior-events $print_inferior_events"
+ gdb_test_no_output "set follow-fork-mode $follow_fork_mode"
+ gdb_test_no_output "set detach-on-fork $detach_on_fork"
+
+ set output [lindex $expected_output $i]
+ # Always add the "Starting program..." string so that we
+ # match exactly the lines we want.
+ set output "Starting program: $binfile\\s*\r\n${output}${exited_normally_re}"
+ set i [expr $i + 1]
+ gdb_test "run" $output
+ }
+ }
+}
proc hook_stop_kill {} {
with_test_prefix "hook-stop kills inferior" {
global gdb_prompt
+ global decimal
setup "kill"
set test "run hook-stop"
gdb_test_multiple "continue" "$test" {
- -re "Continuing.\r\n${gdb_prompt} $" {
+ -re "Continuing.\r\n\\\[Inferior $decimal \\(.*\\) has been killed\\\]\r\n${gdb_prompt} $" {
pass $test
}
}
gdb_test "continue" "Program received signal SIGUSR1, .*"
gdb_test "stepi" "\r\nhandler .*"
-gdb_test "kill" "^y" "kill" "Kill the program being debugged\\? \\(y or n\\) $" "y"
+gdb_test_multiple "kill" "kill" {
+ -re "Kill the program being debugged\\? \\(y or n\\) $" {
+ gdb_test "y" "\\\[Inferior $decimal \\(.*\\) has been killed\\\]" "kill"
+ }
+}
# Detach the process.
- gdb_test "detach" "Detaching from program: .*$escapedbinfile, process $testpid"
+ gdb_test "detach" "Detaching from program: .*$escapedbinfile, process $testpid\r\n\\\[Inferior $decimal \\(.*\\) detached\\\]"
# Wait a bit for gdb to finish detaching
"1.*${thread_re}.*\r\n.*2.*${thread_re}.*" \
"info threads shows two LWPs"
- gdb_test "detach" "Detaching from .*, process $testpid"
+ gdb_test "detach" "Detaching from .*, process $testpid\r\n\\\[Inferior $decimal \\(.*\\) detached\\\]"
}
}
"1.*${thread_re}.*\\(running\\)\r\n.*2.*${thread_re}.*\\(running\\)" \
"info threads shows two LWPs"
- gdb_test "detach" "Detaching from .*, process $testpid"
+ gdb_test "detach" "Detaching from .*, process $testpid\r\n\\\[Inferior $decimal \\(.*\\) detached\\\]"
}
}
# program and spawn several threads before trying to kill the program.
proc test {threaded} {
- global testfile srcfile
+ global testfile srcfile decimal
with_test_prefix [expr ($threaded)?"threaded":"non-threaded"] {
#
# the above would mean that the remote end crashed.
- gdb_test "kill" "^y" "kill program" "Kill the program being debugged\\? \\(y or n\\) $" "y"
+ gdb_test_multiple "kill" "kill" {
+ -re "Kill the program being debugged\\? \\(y or n\\) $" {
+ gdb_test "y" "\\\[Inferior $decimal \\(.*\\) has been killed\\\]" "kill"
+ }
+ }
}
}
&& [target_info gdb_protocol] == "remote"}]
if {$multi_process} {
- gdb_test "detach" "Detaching from .*, process $decimal" \
+ gdb_test "detach" "Detaching from .*, process $decimal\r\n\\\[Inferior $decimal \\(.*\\) detached\\\]" \
"detach child"
gdb_test "inferior 1" "\[Switching to inferior $decimal\].*" \
set extra ""
}
if {$cmd == "detach"} {
- gdb_test "detach" "Detaching from .*, process $decimal$extra"
+ gdb_test "detach" "Detaching from .*, process ${decimal}\r\n\\\[Inferior $decimal \\(.*\\) detached\\\]$extra"
} elseif {$cmd == "continue"} {
gdb_test "continue" $continue_re
} else {
projects / binutils-gdb.git / commitdiff