+++ /dev/null
-/* Remote debugging interface for M32R/SDI.
-
- Copyright (C) 2003-2016 Free Software Foundation, Inc.
-
- Contributed by Renesas Technology Co.
- Written by Kei Sakamoto <sakamoto.kei@renesas.com>.
-
- This file is part of GDB.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>. */
-
-#include "defs.h"
-#include "gdbcmd.h"
-#include "gdbcore.h"
-#include "inferior.h"
-#include "infrun.h"
-#include "target.h"
-#include "regcache.h"
-#include "gdbthread.h"
-#include <ctype.h>
-#include <signal.h>
-#ifdef __MINGW32__
-#include <winsock2.h>
-#else
-#include <netinet/in.h>
-#endif
-#include <sys/types.h>
-#include "gdb_sys_time.h"
-#include <time.h>
-#include "gdb_bfd.h"
-#include "cli/cli-utils.h"
-#include "symfile.h"
-#include "serial.h"
-
-/* Descriptor for I/O to remote machine. */
-
-static struct serial *sdi_desc = NULL;
-
-#define SDI_TIMEOUT 30
-
-
-#define SDIPORT 3232
-
-static char chip_name[64];
-
-static int step_mode;
-static unsigned long last_pc_addr = 0xffffffff;
-static unsigned char last_pc_addr_data[2];
-
-static int mmu_on = 0;
-
-static int use_ib_breakpoints = 1;
-
-#define MAX_BREAKPOINTS 1024
-static int max_ib_breakpoints;
-static unsigned long bp_address[MAX_BREAKPOINTS];
-static unsigned char bp_data[MAX_BREAKPOINTS][4];
-
-/* dbt -> nop */
-static const unsigned char dbt_bp_entry[] = {
- 0x10, 0xe0, 0x70, 0x00
-};
-
-#define MAX_ACCESS_BREAKS 4
-static int max_access_breaks;
-static unsigned long ab_address[MAX_ACCESS_BREAKS];
-static unsigned int ab_type[MAX_ACCESS_BREAKS];
-static unsigned int ab_size[MAX_ACCESS_BREAKS];
-static CORE_ADDR hit_watchpoint_addr = 0;
-
-static int interrupted = 0;
-
-/* Forward data declarations */
-extern struct target_ops m32r_ops;
-
-/* This is the ptid we use while we're connected to the remote. Its
- value is arbitrary, as the target doesn't have a notion of
- processes or threads, but we need something non-null to place in
- inferior_ptid. */
-static ptid_t remote_m32r_ptid;
-
-/* Commands */
-#define SDI_OPEN 1
-#define SDI_CLOSE 2
-#define SDI_RELEASE 3
-#define SDI_READ_CPU_REG 4
-#define SDI_WRITE_CPU_REG 5
-#define SDI_READ_MEMORY 6
-#define SDI_WRITE_MEMORY 7
-#define SDI_EXEC_CPU 8
-#define SDI_STOP_CPU 9
-#define SDI_WAIT_FOR_READY 10
-#define SDI_GET_ATTR 11
-#define SDI_SET_ATTR 12
-#define SDI_STATUS 13
-
-/* Attributes */
-#define SDI_ATTR_NAME 1
-#define SDI_ATTR_BRK 2
-#define SDI_ATTR_ABRK 3
-#define SDI_ATTR_CACHE 4
-#define SDI_CACHE_TYPE_M32102 0
-#define SDI_CACHE_TYPE_CHAOS 1
-#define SDI_ATTR_MEM_ACCESS 5
-#define SDI_MEM_ACCESS_DEBUG_DMA 0
-#define SDI_MEM_ACCESS_MON_CODE 1
-
-/* Registers */
-#define SDI_REG_R0 0
-#define SDI_REG_R1 1
-#define SDI_REG_R2 2
-#define SDI_REG_R3 3
-#define SDI_REG_R4 4
-#define SDI_REG_R5 5
-#define SDI_REG_R6 6
-#define SDI_REG_R7 7
-#define SDI_REG_R8 8
-#define SDI_REG_R9 9
-#define SDI_REG_R10 10
-#define SDI_REG_R11 11
-#define SDI_REG_R12 12
-#define SDI_REG_FP 13
-#define SDI_REG_LR 14
-#define SDI_REG_SP 15
-#define SDI_REG_PSW 16
-#define SDI_REG_CBR 17
-#define SDI_REG_SPI 18
-#define SDI_REG_SPU 19
-#define SDI_REG_CR4 20
-#define SDI_REG_EVB 21
-#define SDI_REG_BPC 22
-#define SDI_REG_CR7 23
-#define SDI_REG_BBPSW 24
-#define SDI_REG_CR9 25
-#define SDI_REG_CR10 26
-#define SDI_REG_CR11 27
-#define SDI_REG_CR12 28
-#define SDI_REG_WR 29
-#define SDI_REG_BBPC 30
-#define SDI_REG_PBP 31
-#define SDI_REG_ACCH 32
-#define SDI_REG_ACCL 33
-#define SDI_REG_ACC1H 34
-#define SDI_REG_ACC1L 35
-
-
-/* Low level communication functions. */
-
-/* Check an ack packet from the target. */
-static int
-get_ack (void)
-{
- int c;
-
- if (!sdi_desc)
- return -1;
-
- c = serial_readchar (sdi_desc, SDI_TIMEOUT);
-
- if (c < 0)
- return -1;
-
- if (c != '+') /* error */
- return -1;
-
- return 0;
-}
-
-/* Send data to the target and check an ack packet. */
-static int
-send_data (const void *buf, int len)
-{
- if (!sdi_desc)
- return -1;
-
- if (serial_write (sdi_desc, buf, len) != 0)
- return -1;
-
- if (get_ack () == -1)
- return -1;
-
- return len;
-}
-
-/* Receive data from the target. */
-static int
-recv_data (void *buf, int len)
-{
- int total = 0;
- int c;
-
- if (!sdi_desc)
- return -1;
-
- while (total < len)
- {
- c = serial_readchar (sdi_desc, SDI_TIMEOUT);
-
- if (c < 0)
- return -1;
-
- ((unsigned char *) buf)[total++] = c;
- }
-
- return len;
-}
-
-/* Store unsigned long parameter on packet. */
-static void
-store_long_parameter (void *buf, long val)
-{
- val = htonl (val);
- memcpy (buf, &val, 4);
-}
-
-static int
-send_cmd (unsigned char cmd)
-{
- unsigned char buf[1];
-
- buf[0] = cmd;
- return send_data (buf, 1);
-}
-
-static int
-send_one_arg_cmd (unsigned char cmd, unsigned char arg1)
-{
- unsigned char buf[2];
-
- buf[0] = cmd;
- buf[1] = arg1;
- return send_data (buf, 2);
-}
-
-static int
-send_two_arg_cmd (unsigned char cmd, unsigned char arg1, unsigned long arg2)
-{
- unsigned char buf[6];
-
- buf[0] = cmd;
- buf[1] = arg1;
- store_long_parameter (buf + 2, arg2);
- return send_data (buf, 6);
-}
-
-static int
-send_three_arg_cmd (unsigned char cmd, unsigned long arg1, unsigned long arg2,
- unsigned long arg3)
-{
- unsigned char buf[13];
-
- buf[0] = cmd;
- store_long_parameter (buf + 1, arg1);
- store_long_parameter (buf + 5, arg2);
- store_long_parameter (buf + 9, arg3);
- return send_data (buf, 13);
-}
-
-static unsigned char
-recv_char_data (void)
-{
- unsigned char val = 0; /* -Wall */
-
- recv_data (&val, 1);
- return val;
-}
-
-static unsigned long
-recv_long_data (void)
-{
- unsigned long val = 0; /* -Wall */
-
- recv_data (&val, 4);
- return ntohl (val);
-}
-
-
-/* Check if MMU is on. */
-static void
-check_mmu_status (void)
-{
- unsigned long val;
-
- /* Read PC address. */
- if (send_one_arg_cmd (SDI_READ_CPU_REG, SDI_REG_BPC) == -1)
- return;
- val = recv_long_data ();
- if ((val & 0xc0000000) == 0x80000000)
- {
- mmu_on = 1;
- return;
- }
-
- /* Read EVB address. */
- if (send_one_arg_cmd (SDI_READ_CPU_REG, SDI_REG_EVB) == -1)
- return;
- val = recv_long_data ();
- if ((val & 0xc0000000) == 0x80000000)
- {
- mmu_on = 1;
- return;
- }
-
- mmu_on = 0;
-}
-
-
-/* This is called not only when we first attach, but also when the
- user types "run" after having attached. */
-static void
-m32r_create_inferior (struct target_ops *ops, char *execfile,
- char *args, char **env, int from_tty)
-{
- CORE_ADDR entry_pt;
-
- if (args && *args)
- error (_("Cannot pass arguments to remote STDEBUG process"));
-
- if (execfile == 0 || exec_bfd == 0)
- error (_("No executable file specified"));
-
- if (remote_debug)
- fprintf_unfiltered (gdb_stdlog, "m32r_create_inferior(%s,%s)\n", execfile,
- args);
-
- entry_pt = bfd_get_start_address (exec_bfd);
-
- /* The "process" (board) is already stopped awaiting our commands, and
- the program is already downloaded. We just set its PC and go. */
-
- clear_proceed_status (0);
-
- /* Tell wait_for_inferior that we've started a new process. */
- init_wait_for_inferior ();
-
- /* Set up the "saved terminal modes" of the inferior
- based on what modes we are starting it with. */
- target_terminal_init ();
-
- /* Install inferior's terminal modes. */
- target_terminal_inferior ();
-
- regcache_write_pc (get_current_regcache (), entry_pt);
-}
-
-/* Open a connection to a remote debugger.
- NAME is the filename used for communication. */
-
-static void
-m32r_open (const char *args, int from_tty)
-{
- struct hostent *host_ent;
- struct sockaddr_in server_addr;
- char hostname[256];
- const char *port_str;
- int port;
- int i, n;
- int yes = 1;
-
- if (remote_debug)
- fprintf_unfiltered (gdb_stdlog, "m32r_open(%d)\n", from_tty);
-
- target_preopen (from_tty);
-
- push_target (&m32r_ops);
-
- if (args == NULL)
- xsnprintf (hostname, sizeof (hostname), "localhost:%d", SDIPORT);
- else
- {
- port_str = strchr (args, ':');
- if (port_str == NULL)
- xsnprintf (hostname, sizeof (hostname), "%s:%d", args, SDIPORT);
- else
- xsnprintf (hostname, sizeof (hostname), "%s", args);
- }
-
- sdi_desc = serial_open (hostname);
- if (!sdi_desc)
- error (_("Connection refused."));
-
- if (get_ack () == -1)
- error (_("Cannot connect to SDI target."));
-
- if (send_cmd (SDI_OPEN) == -1)
- error (_("Cannot connect to SDI target."));
-
- /* Get maximum number of ib breakpoints. */
- send_one_arg_cmd (SDI_GET_ATTR, SDI_ATTR_BRK);
- max_ib_breakpoints = recv_char_data ();
- if (remote_debug)
- printf_filtered ("Max IB Breakpoints = %d\n", max_ib_breakpoints);
-
- /* Initialize breakpoints. */
- for (i = 0; i < MAX_BREAKPOINTS; i++)
- bp_address[i] = 0xffffffff;
-
- /* Get maximum number of access breaks. */
- send_one_arg_cmd (SDI_GET_ATTR, SDI_ATTR_ABRK);
- max_access_breaks = recv_char_data ();
- if (remote_debug)
- printf_filtered ("Max Access Breaks = %d\n", max_access_breaks);
-
- /* Initialize access breask. */
- for (i = 0; i < MAX_ACCESS_BREAKS; i++)
- ab_address[i] = 0x00000000;
-
- check_mmu_status ();
-
- /* Get the name of chip on target board. */
- send_one_arg_cmd (SDI_GET_ATTR, SDI_ATTR_NAME);
- recv_data (chip_name, 64);
-
- if (from_tty)
- printf_filtered ("Remote %s connected to %s\n", target_shortname,
- chip_name);
-}
-
-/* Close out all files and local state before this target loses control. */
-
-static void
-m32r_close (struct target_ops *self)
-{
- if (remote_debug)
- fprintf_unfiltered (gdb_stdlog, "m32r_close()\n");
-
- if (sdi_desc)
- {
- send_cmd (SDI_CLOSE);
- serial_close (sdi_desc);
- sdi_desc = NULL;
- }
-
- inferior_ptid = null_ptid;
- delete_thread_silent (remote_m32r_ptid);
- return;
-}
-
-/* Tell the remote machine to resume. */
-
-static void
-m32r_resume (struct target_ops *ops,
- ptid_t ptid, int step, enum gdb_signal sig)
-{
- unsigned long pc_addr, bp_addr, ab_addr;
- int ib_breakpoints;
- unsigned char buf[13];
- int i;
-
- if (remote_debug)
- {
- if (step)
- fprintf_unfiltered (gdb_stdlog, "\nm32r_resume(step)\n");
- else
- fprintf_unfiltered (gdb_stdlog, "\nm32r_resume(cont)\n");
- }
-
- check_mmu_status ();
-
- pc_addr = regcache_read_pc (get_current_regcache ());
- if (remote_debug)
- fprintf_unfiltered (gdb_stdlog, "pc <= 0x%lx\n", pc_addr);
-
- /* At pc address there is a parallel instruction with +2 offset,
- so we have to make it a serial instruction or avoid it. */
- if (pc_addr == last_pc_addr)
- {
- /* Avoid a parallel nop. */
- if (last_pc_addr_data[0] == 0xf0 && last_pc_addr_data[1] == 0x00)
- {
- pc_addr += 2;
- /* Now we can forget this instruction. */
- last_pc_addr = 0xffffffff;
- }
- /* Clear a parallel bit. */
- else
- {
- buf[0] = SDI_WRITE_MEMORY;
- if (gdbarch_byte_order (target_gdbarch ()) == BFD_ENDIAN_BIG)
- store_long_parameter (buf + 1, pc_addr);
- else
- store_long_parameter (buf + 1, pc_addr - 1);
- store_long_parameter (buf + 5, 1);
- buf[9] = last_pc_addr_data[0] & 0x7f;
- send_data (buf, 10);
- }
- }
-
- /* Set PC. */
- send_two_arg_cmd (SDI_WRITE_CPU_REG, SDI_REG_BPC, pc_addr);
-
- /* step mode. */
- step_mode = step;
- if (step)
- {
- /* Set PBP. */
- send_two_arg_cmd (SDI_WRITE_CPU_REG, SDI_REG_PBP, pc_addr | 1);
- }
- else
- {
- /* Unset PBP. */
- send_two_arg_cmd (SDI_WRITE_CPU_REG, SDI_REG_PBP, 0x00000000);
- }
-
- if (use_ib_breakpoints)
- ib_breakpoints = max_ib_breakpoints;
- else
- ib_breakpoints = 0;
-
- /* Set ib breakpoints. */
- for (i = 0; i < ib_breakpoints; i++)
- {
- bp_addr = bp_address[i];
-
- if (bp_addr == 0xffffffff)
- continue;
-
- /* Set PBP. */
- if (gdbarch_byte_order (target_gdbarch ()) == BFD_ENDIAN_BIG)
- send_three_arg_cmd (SDI_WRITE_MEMORY, 0xffff8000 + 4 * i, 4,
- 0x00000006);
- else
- send_three_arg_cmd (SDI_WRITE_MEMORY, 0xffff8000 + 4 * i, 4,
- 0x06000000);
-
- send_three_arg_cmd (SDI_WRITE_MEMORY, 0xffff8080 + 4 * i, 4, bp_addr);
- }
-
- /* Set dbt breakpoints. */
- for (i = ib_breakpoints; i < MAX_BREAKPOINTS; i++)
- {
- bp_addr = bp_address[i];
-
- if (bp_addr == 0xffffffff)
- continue;
-
- if (!mmu_on)
- bp_addr &= 0x7fffffff;
-
- /* Write DBT instruction. */
- buf[0] = SDI_WRITE_MEMORY;
- store_long_parameter (buf + 1, (bp_addr & 0xfffffffc));
- store_long_parameter (buf + 5, 4);
- if ((bp_addr & 2) == 0 && bp_addr != (pc_addr & 0xfffffffc))
- {
- if (gdbarch_byte_order (target_gdbarch ()) == BFD_ENDIAN_BIG)
- {
- buf[9] = dbt_bp_entry[0];
- buf[10] = dbt_bp_entry[1];
- buf[11] = dbt_bp_entry[2];
- buf[12] = dbt_bp_entry[3];
- }
- else
- {
- buf[9] = dbt_bp_entry[3];
- buf[10] = dbt_bp_entry[2];
- buf[11] = dbt_bp_entry[1];
- buf[12] = dbt_bp_entry[0];
- }
- }
- else
- {
- if (gdbarch_byte_order (target_gdbarch ()) == BFD_ENDIAN_BIG)
- {
- if ((bp_addr & 2) == 0)
- {
- buf[9] = dbt_bp_entry[0];
- buf[10] = dbt_bp_entry[1];
- buf[11] = bp_data[i][2] & 0x7f;
- buf[12] = bp_data[i][3];
- }
- else
- {
- buf[9] = bp_data[i][0];
- buf[10] = bp_data[i][1];
- buf[11] = dbt_bp_entry[0];
- buf[12] = dbt_bp_entry[1];
- }
- }
- else
- {
- if ((bp_addr & 2) == 0)
- {
- buf[9] = bp_data[i][0];
- buf[10] = bp_data[i][1] & 0x7f;
- buf[11] = dbt_bp_entry[1];
- buf[12] = dbt_bp_entry[0];
- }
- else
- {
- buf[9] = dbt_bp_entry[1];
- buf[10] = dbt_bp_entry[0];
- buf[11] = bp_data[i][2];
- buf[12] = bp_data[i][3];
- }
- }
- }
- send_data (buf, 13);
- }
-
- /* Set access breaks. */
- for (i = 0; i < max_access_breaks; i++)
- {
- ab_addr = ab_address[i];
-
- if (ab_addr == 0x00000000)
- continue;
-
- /* DBC register. */
- if (gdbarch_byte_order (target_gdbarch ()) == BFD_ENDIAN_BIG)
- {
- switch (ab_type[i])
- {
- case 0: /* write watch */
- send_three_arg_cmd (SDI_WRITE_MEMORY, 0xffff8100 + 4 * i, 4,
- 0x00000086);
- break;
- case 1: /* read watch */
- send_three_arg_cmd (SDI_WRITE_MEMORY, 0xffff8100 + 4 * i, 4,
- 0x00000046);
- break;
- case 2: /* access watch */
- send_three_arg_cmd (SDI_WRITE_MEMORY, 0xffff8100 + 4 * i, 4,
- 0x00000006);
- break;
- }
- }
- else
- {
- switch (ab_type[i])
- {
- case 0: /* write watch */
- send_three_arg_cmd (SDI_WRITE_MEMORY, 0xffff8100 + 4 * i, 4,
- 0x86000000);
- break;
- case 1: /* read watch */
- send_three_arg_cmd (SDI_WRITE_MEMORY, 0xffff8100 + 4 * i, 4,
- 0x46000000);
- break;
- case 2: /* access watch */
- send_three_arg_cmd (SDI_WRITE_MEMORY, 0xffff8100 + 4 * i, 4,
- 0x06000000);
- break;
- }
- }
-
- /* DBAH register. */
- send_three_arg_cmd (SDI_WRITE_MEMORY, 0xffff8180 + 4 * i, 4, ab_addr);
-
- /* DBAL register. */
- send_three_arg_cmd (SDI_WRITE_MEMORY, 0xffff8200 + 4 * i, 4,
- 0xffffffff);
-
- /* DBD register. */
- send_three_arg_cmd (SDI_WRITE_MEMORY, 0xffff8280 + 4 * i, 4,
- 0x00000000);
-
- /* DBDM register. */
- send_three_arg_cmd (SDI_WRITE_MEMORY, 0xffff8300 + 4 * i, 4,
- 0x00000000);
- }
-
- /* Resume program. */
- send_cmd (SDI_EXEC_CPU);
-
- /* Without this, some commands which require an active target (such as kill)
- won't work. This variable serves (at least) double duty as both the pid
- of the target process (if it has such), and as a flag indicating that a
- target is active. These functions should be split out into seperate
- variables, especially since GDB will someday have a notion of debugging
- several processes. */
- inferior_ptid = remote_m32r_ptid;
- add_thread_silent (remote_m32r_ptid);
-
- return;
-}
-
-/* Wait until the remote machine stops, then return,
- storing status in STATUS just as `wait' would. */
-
-static void
-gdb_cntrl_c (int signo)
-{
- if (remote_debug)
- fprintf_unfiltered (gdb_stdlog, "interrupt\n");
- interrupted = 1;
-}
-
-static ptid_t
-m32r_wait (struct target_ops *ops,
- ptid_t ptid, struct target_waitstatus *status, int options)
-{
- static sighandler_t prev_sigint;
- unsigned long bp_addr, pc_addr;
- int ib_breakpoints;
- long i;
- unsigned char buf[13];
- int ret, c;
-
- if (remote_debug)
- fprintf_unfiltered (gdb_stdlog, "m32r_wait()\n");
-
- status->kind = TARGET_WAITKIND_EXITED;
- status->value.sig = GDB_SIGNAL_0;
-
- interrupted = 0;
- prev_sigint = signal (SIGINT, gdb_cntrl_c);
-
- /* Wait for ready. */
- buf[0] = SDI_WAIT_FOR_READY;
- if (serial_write (sdi_desc, buf, 1) != 0)
- error (_("Remote connection closed"));
-
- while (1)
- {
- c = serial_readchar (sdi_desc, SDI_TIMEOUT);
- if (c < 0)
- error (_("Remote connection closed"));
-
- if (c == '-') /* error */
- {
- status->kind = TARGET_WAITKIND_STOPPED;
- status->value.sig = GDB_SIGNAL_HUP;
- return inferior_ptid;
- }
- else if (c == '+') /* stopped */
- break;
-
- if (interrupted)
- ret = serial_write (sdi_desc, "!", 1); /* packet to interrupt */
- else
- ret = serial_write (sdi_desc, ".", 1); /* packet to wait */
- if (ret != 0)
- error (_("Remote connection closed"));
- }
-
- status->kind = TARGET_WAITKIND_STOPPED;
- if (interrupted)
- status->value.sig = GDB_SIGNAL_INT;
- else
- status->value.sig = GDB_SIGNAL_TRAP;
-
- interrupted = 0;
- signal (SIGINT, prev_sigint);
-
- check_mmu_status ();
-
- /* Recover parallel bit. */
- if (last_pc_addr != 0xffffffff)
- {
- buf[0] = SDI_WRITE_MEMORY;
- if (gdbarch_byte_order (target_gdbarch ()) == BFD_ENDIAN_BIG)
- store_long_parameter (buf + 1, last_pc_addr);
- else
- store_long_parameter (buf + 1, last_pc_addr - 1);
- store_long_parameter (buf + 5, 1);
- buf[9] = last_pc_addr_data[0];
- send_data (buf, 10);
- last_pc_addr = 0xffffffff;
- }
-
- if (use_ib_breakpoints)
- ib_breakpoints = max_ib_breakpoints;
- else
- ib_breakpoints = 0;
-
- /* Set back pc by 2 if m32r is stopped with dbt. */
- last_pc_addr = 0xffffffff;
- send_one_arg_cmd (SDI_READ_CPU_REG, SDI_REG_BPC);
- pc_addr = recv_long_data () - 2;
- for (i = ib_breakpoints; i < MAX_BREAKPOINTS; i++)
- {
- if (pc_addr == bp_address[i])
- {
- send_two_arg_cmd (SDI_WRITE_CPU_REG, SDI_REG_BPC, pc_addr);
-
- /* If there is a parallel instruction with +2 offset at pc
- address, we have to take care of it later. */
- if ((pc_addr & 0x2) != 0)
- {
- if (gdbarch_byte_order (target_gdbarch ()) == BFD_ENDIAN_BIG)
- {
- if ((bp_data[i][2] & 0x80) != 0)
- {
- last_pc_addr = pc_addr;
- last_pc_addr_data[0] = bp_data[i][2];
- last_pc_addr_data[1] = bp_data[i][3];
- }
- }
- else
- {
- if ((bp_data[i][1] & 0x80) != 0)
- {
- last_pc_addr = pc_addr;
- last_pc_addr_data[0] = bp_data[i][1];
- last_pc_addr_data[1] = bp_data[i][0];
- }
- }
- }
- break;
- }
- }
-
- /* Remove ib breakpoints. */
- for (i = 0; i < ib_breakpoints; i++)
- {
- if (bp_address[i] != 0xffffffff)
- send_three_arg_cmd (SDI_WRITE_MEMORY, 0xffff8000 + 4 * i, 4,
- 0x00000000);
- }
- /* Remove dbt breakpoints. */
- for (i = ib_breakpoints; i < MAX_BREAKPOINTS; i++)
- {
- bp_addr = bp_address[i];
- if (bp_addr != 0xffffffff)
- {
- if (!mmu_on)
- bp_addr &= 0x7fffffff;
- buf[0] = SDI_WRITE_MEMORY;
- store_long_parameter (buf + 1, bp_addr & 0xfffffffc);
- store_long_parameter (buf + 5, 4);
- buf[9] = bp_data[i][0];
- buf[10] = bp_data[i][1];
- buf[11] = bp_data[i][2];
- buf[12] = bp_data[i][3];
- send_data (buf, 13);
- }
- }
-
- /* Remove access breaks. */
- hit_watchpoint_addr = 0;
- for (i = 0; i < max_access_breaks; i++)
- {
- if (ab_address[i] != 0x00000000)
- {
- buf[0] = SDI_READ_MEMORY;
- store_long_parameter (buf + 1, 0xffff8100 + 4 * i);
- store_long_parameter (buf + 5, 4);
- serial_write (sdi_desc, buf, 9);
- c = serial_readchar (sdi_desc, SDI_TIMEOUT);
- if (c != '-' && recv_data (buf, 4) != -1)
- {
- if (gdbarch_byte_order (target_gdbarch ()) == BFD_ENDIAN_BIG)
- {
- if ((buf[3] & 0x1) == 0x1)
- hit_watchpoint_addr = ab_address[i];
- }
- else
- {
- if ((buf[0] & 0x1) == 0x1)
- hit_watchpoint_addr = ab_address[i];
- }
- }
-
- send_three_arg_cmd (SDI_WRITE_MEMORY, 0xffff8100 + 4 * i, 4,
- 0x00000000);
- }
- }
-
- if (remote_debug)
- fprintf_unfiltered (gdb_stdlog, "pc => 0x%lx\n", pc_addr);
-
- return inferior_ptid;
-}
-
-/* Terminate the open connection to the remote debugger.
- Use this when you want to detach and do something else
- with your gdb. */
-static void
-m32r_detach (struct target_ops *ops, const char *args, int from_tty)
-{
- if (remote_debug)
- fprintf_unfiltered (gdb_stdlog, "m32r_detach(%d)\n", from_tty);
-
- m32r_resume (ops, inferior_ptid, 0, GDB_SIGNAL_0);
-
- /* Calls m32r_close to do the real work. */
- unpush_target (ops);
- if (from_tty)
- fprintf_unfiltered (gdb_stdlog, "Ending remote %s debugging\n",
- target_shortname);
-}
-
-/* Return the id of register number REGNO. */
-
-static int
-get_reg_id (int regno)
-{
- switch (regno)
- {
- case 20:
- return SDI_REG_BBPC;
- case 21:
- return SDI_REG_BPC;
- case 22:
- return SDI_REG_ACCL;
- case 23:
- return SDI_REG_ACCH;
- case 24:
- return SDI_REG_EVB;
- }
-
- return regno;
-}
-
-/* Fetch register REGNO, or all registers if REGNO is -1.
- Returns errno value. */
-static void
-m32r_fetch_register (struct target_ops *ops,
- struct regcache *regcache, int regno)
-{
- struct gdbarch *gdbarch = get_regcache_arch (regcache);
- enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
- unsigned long val, val2, regid;
-
- if (regno == -1)
- {
- for (regno = 0;
- regno < gdbarch_num_regs (get_regcache_arch (regcache));
- regno++)
- m32r_fetch_register (ops, regcache, regno);
- }
- else
- {
- gdb_byte buffer[MAX_REGISTER_SIZE];
-
- regid = get_reg_id (regno);
- send_one_arg_cmd (SDI_READ_CPU_REG, regid);
- val = recv_long_data ();
-
- if (regid == SDI_REG_PSW)
- {
- send_one_arg_cmd (SDI_READ_CPU_REG, SDI_REG_BBPSW);
- val2 = recv_long_data ();
- val = ((0x00cf & val2) << 8) | ((0xcf00 & val) >> 8);
- }
-
- if (remote_debug)
- fprintf_unfiltered (gdb_stdlog, "m32r_fetch_register(%d,0x%08lx)\n",
- regno, val);
-
- /* We got the number the register holds, but gdb expects to see a
- value in the target byte ordering. */
- store_unsigned_integer (buffer, 4, byte_order, val);
- regcache_raw_supply (regcache, regno, buffer);
- }
- return;
-}
-
-/* Store register REGNO, or all if REGNO == 0.
- Return errno value. */
-static void
-m32r_store_register (struct target_ops *ops,
- struct regcache *regcache, int regno)
-{
- int regid;
- ULONGEST regval, tmp;
-
- if (regno == -1)
- {
- for (regno = 0;
- regno < gdbarch_num_regs (get_regcache_arch (regcache));
- regno++)
- m32r_store_register (ops, regcache, regno);
- }
- else
- {
- regcache_cooked_read_unsigned (regcache, regno, ®val);
- regid = get_reg_id (regno);
-
- if (regid == SDI_REG_PSW)
- {
- unsigned long psw, bbpsw;
-
- send_one_arg_cmd (SDI_READ_CPU_REG, SDI_REG_PSW);
- psw = recv_long_data ();
-
- send_one_arg_cmd (SDI_READ_CPU_REG, SDI_REG_BBPSW);
- bbpsw = recv_long_data ();
-
- tmp = (0x00cf & psw) | ((0x00cf & regval) << 8);
- send_two_arg_cmd (SDI_WRITE_CPU_REG, SDI_REG_PSW, tmp);
-
- tmp = (0x0030 & bbpsw) | ((0xcf00 & regval) >> 8);
- send_two_arg_cmd (SDI_WRITE_CPU_REG, SDI_REG_BBPSW, tmp);
- }
- else
- {
- send_two_arg_cmd (SDI_WRITE_CPU_REG, regid, regval);
- }
-
- if (remote_debug)
- fprintf_unfiltered (gdb_stdlog, "m32r_store_register(%d,0x%08lu)\n",
- regno, (unsigned long) regval);
- }
-}
-
-/* Get ready to modify the registers array. On machines which store
- individual registers, this doesn't need to do anything. On machines
- which store all the registers in one fell swoop, this makes sure
- that registers contains all the registers from the program being
- debugged. */
-
-static void
-m32r_prepare_to_store (struct target_ops *self, struct regcache *regcache)
-{
- /* Do nothing, since we can store individual regs. */
- if (remote_debug)
- fprintf_unfiltered (gdb_stdlog, "m32r_prepare_to_store()\n");
-}
-
-static void
-m32r_files_info (struct target_ops *target)
-{
- const char *file = "nothing";
-
- if (exec_bfd)
- {
- file = bfd_get_filename (exec_bfd);
- printf_filtered ("\tAttached to %s running program %s\n",
- chip_name, file);
- }
-}
-
-/* Helper for m32r_xfer_partial that handles memory transfers.
- Arguments are like target_xfer_partial. */
-
-static enum target_xfer_status
-m32r_xfer_memory (gdb_byte *readbuf, const gdb_byte *writebuf,
- ULONGEST memaddr, ULONGEST len, ULONGEST *xfered_len)
-{
- unsigned long taddr;
- unsigned char buf[0x2000];
- int ret, c;
-
- taddr = memaddr;
-
- if (!mmu_on)
- {
- if ((taddr & 0xa0000000) == 0x80000000)
- taddr &= 0x7fffffff;
- }
-
- if (remote_debug)
- {
- if (writebuf != NULL)
- fprintf_unfiltered (gdb_stdlog, "m32r_xfer_memory(%s,%s,write)\n",
- paddress (target_gdbarch (), memaddr),
- plongest (len));
- else
- fprintf_unfiltered (gdb_stdlog, "m32r_xfer_memory(%s,%s,read)\n",
- paddress (target_gdbarch (), memaddr),
- plongest (len));
- }
-
- if (writebuf != NULL)
- {
- buf[0] = SDI_WRITE_MEMORY;
- store_long_parameter (buf + 1, taddr);
- store_long_parameter (buf + 5, len);
- if (len < 0x1000)
- {
- memcpy (buf + 9, writebuf, len);
- ret = send_data (buf, len + 9) - 9;
- }
- else
- {
- if (serial_write (sdi_desc, buf, 9) != 0)
- {
- if (remote_debug)
- fprintf_unfiltered (gdb_stdlog,
- "m32r_xfer_memory() failed\n");
- return TARGET_XFER_EOF;
- }
- ret = send_data (writebuf, len);
- }
- }
- else
- {
- buf[0] = SDI_READ_MEMORY;
- store_long_parameter (buf + 1, taddr);
- store_long_parameter (buf + 5, len);
- if (serial_write (sdi_desc, buf, 9) != 0)
- {
- if (remote_debug)
- fprintf_unfiltered (gdb_stdlog, "m32r_xfer_memory() failed\n");
- return TARGET_XFER_EOF;
- }
-
- c = serial_readchar (sdi_desc, SDI_TIMEOUT);
- if (c < 0 || c == '-')
- {
- if (remote_debug)
- fprintf_unfiltered (gdb_stdlog, "m32r_xfer_memory() failed\n");
- return TARGET_XFER_EOF;
- }
-
- ret = recv_data (readbuf, len);
- }
-
- if (ret <= 0)
- {
- if (remote_debug)
- fprintf_unfiltered (gdb_stdlog, "m32r_xfer_memory() fails\n");
- return TARGET_XFER_E_IO;
- }
-
- *xfered_len = ret;
- return TARGET_XFER_OK;
-}
-
-/* Target to_xfer_partial implementation. */
-
-static enum target_xfer_status
-m32r_xfer_partial (struct target_ops *ops, enum target_object object,
- const char *annex, gdb_byte *readbuf,
- const gdb_byte *writebuf, ULONGEST offset, ULONGEST len,
- ULONGEST *xfered_len)
-{
- switch (object)
- {
- case TARGET_OBJECT_MEMORY:
- return m32r_xfer_memory (readbuf, writebuf, offset, len, xfered_len);
-
- default:
- return ops->beneath->to_xfer_partial (ops->beneath, object, annex,
- readbuf, writebuf, offset, len,
- xfered_len);
- }
-}
-
-static void
-m32r_kill (struct target_ops *ops)
-{
- if (remote_debug)
- fprintf_unfiltered (gdb_stdlog, "m32r_kill()\n");
-
- inferior_ptid = null_ptid;
- delete_thread_silent (remote_m32r_ptid);
-
- return;
-}
-
-/* Clean up when a program exits.
-
- The program actually lives on in the remote processor's RAM, and may be
- run again without a download. Don't leave it full of breakpoint
- instructions. */
-
-static void
-m32r_mourn_inferior (struct target_ops *ops)
-{
- if (remote_debug)
- fprintf_unfiltered (gdb_stdlog, "m32r_mourn_inferior()\n");
-
- remove_breakpoints ();
- generic_mourn_inferior ();
-}
-
-static int
-m32r_insert_breakpoint (struct target_ops *ops,
- struct gdbarch *gdbarch,
- struct bp_target_info *bp_tgt)
-{
- CORE_ADDR addr = bp_tgt->placed_address = bp_tgt->reqstd_address;
- int ib_breakpoints;
- unsigned char buf[13];
- int i, c;
-
- if (remote_debug)
- fprintf_unfiltered (gdb_stdlog, "m32r_insert_breakpoint(%s,...)\n",
- paddress (gdbarch, addr));
-
- if (use_ib_breakpoints)
- ib_breakpoints = max_ib_breakpoints;
- else
- ib_breakpoints = 0;
-
- for (i = 0; i < MAX_BREAKPOINTS; i++)
- {
- if (bp_address[i] == 0xffffffff)
- {
- bp_address[i] = addr;
- if (i >= ib_breakpoints)
- {
- buf[0] = SDI_READ_MEMORY;
- if (mmu_on)
- store_long_parameter (buf + 1, addr & 0xfffffffc);
- else
- store_long_parameter (buf + 1, addr & 0x7ffffffc);
- store_long_parameter (buf + 5, 4);
- serial_write (sdi_desc, buf, 9);
- c = serial_readchar (sdi_desc, SDI_TIMEOUT);
- if (c != '-')
- recv_data (bp_data[i], 4);
- }
- return 0;
- }
- }
-
- error (_("Too many breakpoints"));
- return 1;
-}
-
-static int
-m32r_remove_breakpoint (struct target_ops *ops,
- struct gdbarch *gdbarch,
- struct bp_target_info *bp_tgt)
-{
- CORE_ADDR addr = bp_tgt->placed_address;
- int i;
-
- if (remote_debug)
- fprintf_unfiltered (gdb_stdlog, "m32r_remove_breakpoint(%s)\n",
- paddress (gdbarch, addr));
-
- for (i = 0; i < MAX_BREAKPOINTS; i++)
- {
- if (bp_address[i] == addr)
- {
- bp_address[i] = 0xffffffff;
- break;
- }
- }
-
- return 0;
-}
-
-static void
-m32r_load (struct target_ops *self, const char *args, int from_tty)
-{
- struct cleanup *old_chain = make_cleanup (null_cleanup, NULL);
- asection *section;
- bfd *pbfd;
- bfd_vma entry;
- char *filename;
- int quiet;
- int nostart;
- struct timeval start_time, end_time;
- unsigned long data_count; /* Number of bytes transferred to memory. */
- static sighandler_t prev_sigint;
-
- /* for direct tcp connections, we can do a fast binary download. */
- quiet = 0;
- nostart = 0;
- filename = NULL;
-
- while (*args != '\000')
- {
- char *arg = extract_arg_const (&args);
-
- if (arg == NULL)
- break;
- make_cleanup (xfree, arg);
-
- if (*arg != '-')
- filename = arg;
- else if (startswith ("-quiet", arg))
- quiet = 1;
- else if (startswith ("-nostart", arg))
- nostart = 1;
- else
- error (_("Unknown option `%s'"), arg);
- }
-
- if (!filename)
- filename = get_exec_file (1);
-
- pbfd = gdb_bfd_open (filename, gnutarget, -1);
- if (pbfd == NULL)
- perror_with_name (filename);
- make_cleanup_bfd_unref (pbfd);
-
- if (!bfd_check_format (pbfd, bfd_object))
- error (_("\"%s\" is not an object file: %s"), filename,
- bfd_errmsg (bfd_get_error ()));
-
- gettimeofday (&start_time, NULL);
- data_count = 0;
-
- interrupted = 0;
- prev_sigint = signal (SIGINT, gdb_cntrl_c);
-
- for (section = pbfd->sections; section; section = section->next)
- {
- if (bfd_get_section_flags (pbfd, section) & SEC_LOAD)
- {
- bfd_vma section_address;
- bfd_size_type section_size;
- file_ptr fptr;
- int n;
-
- section_address = bfd_section_lma (pbfd, section);
- section_size = bfd_get_section_size (section);
-
- if (!mmu_on)
- {
- if ((section_address & 0xa0000000) == 0x80000000)
- section_address &= 0x7fffffff;
- }
-
- if (!quiet)
- printf_filtered ("[Loading section %s at 0x%lx (%d bytes)]\n",
- bfd_get_section_name (pbfd, section),
- (unsigned long) section_address,
- (int) section_size);
-
- fptr = 0;
-
- data_count += section_size;
-
- n = 0;
- while (section_size > 0)
- {
- char unsigned buf[0x1000 + 9];
- int count;
-
- count = min (section_size, 0x1000);
-
- buf[0] = SDI_WRITE_MEMORY;
- store_long_parameter (buf + 1, section_address);
- store_long_parameter (buf + 5, count);
-
- bfd_get_section_contents (pbfd, section, buf + 9, fptr, count);
- if (send_data (buf, count + 9) <= 0)
- error (_("Error while downloading %s section."),
- bfd_get_section_name (pbfd, section));
-
- if (!quiet)
- {
- printf_unfiltered (".");
- if (n++ > 60)
- {
- printf_unfiltered ("\n");
- n = 0;
- }
- gdb_flush (gdb_stdout);
- }
-
- section_address += count;
- fptr += count;
- section_size -= count;
-
- if (interrupted)
- break;
- }
-
- if (!quiet && !interrupted)
- {
- printf_unfiltered ("done.\n");
- gdb_flush (gdb_stdout);
- }
- }
-
- if (interrupted)
- {
- printf_unfiltered ("Interrupted.\n");
- break;
- }
- }
-
- interrupted = 0;
- signal (SIGINT, prev_sigint);
-
- gettimeofday (&end_time, NULL);
-
- /* Make the PC point at the start address. */
- if (exec_bfd)
- regcache_write_pc (get_current_regcache (),
- bfd_get_start_address (exec_bfd));
-
- inferior_ptid = null_ptid; /* No process now. */
- delete_thread_silent (remote_m32r_ptid);
-
- /* This is necessary because many things were based on the PC at the time
- that we attached to the monitor, which is no longer valid now that we
- have loaded new code (and just changed the PC). Another way to do this
- might be to call normal_stop, except that the stack may not be valid,
- and things would get horribly confused... */
-
- clear_symtab_users (0);
-
- if (!nostart)
- {
- entry = bfd_get_start_address (pbfd);
-
- if (!quiet)
- printf_unfiltered ("[Starting %s at 0x%lx]\n", filename,
- (unsigned long) entry);
- }
-
- print_transfer_performance (gdb_stdout, data_count, 0, &start_time,
- &end_time);
-
- do_cleanups (old_chain);
-}
-
-static void
-m32r_interrupt (struct target_ops *self, ptid_t ptid)
-{
- if (remote_debug)
- fprintf_unfiltered (gdb_stdlog, "m32r_interrupt()\n");
-
- send_cmd (SDI_STOP_CPU);
-
- return;
-}
-
-
-/* Tell whether this target can support a hardware breakpoint. CNT
- is the number of hardware breakpoints already installed. This
- implements the target_can_use_hardware_watchpoint macro. */
-
-static int
-m32r_can_use_hw_watchpoint (struct target_ops *self,
- enum bptype type,
- int cnt, int othertype)
-{
- return sdi_desc != NULL && cnt < max_access_breaks;
-}
-
-/* Set a data watchpoint. ADDR and LEN should be obvious. TYPE is 0
- for a write watchpoint, 1 for a read watchpoint, or 2 for a read/write
- watchpoint. */
-
-static int
-m32r_insert_watchpoint (struct target_ops *self,
- CORE_ADDR addr, int len, enum target_hw_bp_type type,
- struct expression *cond)
-{
- int i;
-
- if (remote_debug)
- fprintf_unfiltered (gdb_stdlog, "m32r_insert_watchpoint(%s,%d,%d)\n",
- paddress (target_gdbarch (), addr), len, type);
-
- for (i = 0; i < MAX_ACCESS_BREAKS; i++)
- {
- if (ab_address[i] == 0x00000000)
- {
- ab_address[i] = addr;
- ab_size[i] = len;
- ab_type[i] = type;
- return 0;
- }
- }
-
- error (_("Too many watchpoints"));
- return 1;
-}
-
-static int
-m32r_remove_watchpoint (struct target_ops *self, CORE_ADDR addr, int len,
- enum target_hw_bp_type type, struct expression *cond)
-{
- int i;
-
- if (remote_debug)
- fprintf_unfiltered (gdb_stdlog, "m32r_remove_watchpoint(%s,%d,%d)\n",
- paddress (target_gdbarch (), addr), len, type);
-
- for (i = 0; i < MAX_ACCESS_BREAKS; i++)
- {
- if (ab_address[i] == addr)
- {
- ab_address[i] = 0x00000000;
- break;
- }
- }
-
- return 0;
-}
-
-static int
-m32r_stopped_data_address (struct target_ops *target, CORE_ADDR *addr_p)
-{
- int rc = 0;
-
- if (hit_watchpoint_addr != 0x00000000)
- {
- *addr_p = hit_watchpoint_addr;
- rc = 1;
- }
- return rc;
-}
-
-static int
-m32r_stopped_by_watchpoint (struct target_ops *ops)
-{
- CORE_ADDR addr;
-
- return m32r_stopped_data_address (¤t_target, &addr);
-}
-
-/* Check to see if a thread is still alive. */
-
-static int
-m32r_thread_alive (struct target_ops *ops, ptid_t ptid)
-{
- if (ptid_equal (ptid, remote_m32r_ptid))
- /* The main task is always alive. */
- return 1;
-
- return 0;
-}
-
-/* Convert a thread ID to a string. Returns the string in a static
- buffer. */
-
-static char *
-m32r_pid_to_str (struct target_ops *ops, ptid_t ptid)
-{
- static char buf[64];
-
- if (ptid_equal (remote_m32r_ptid, ptid))
- {
- xsnprintf (buf, sizeof buf, "Thread <main>");
- return buf;
- }
-
- return normal_pid_to_str (ptid);
-}
-
-static void
-sdireset_command (char *args, int from_tty)
-{
- if (remote_debug)
- fprintf_unfiltered (gdb_stdlog, "m32r_sdireset()\n");
-
- send_cmd (SDI_OPEN);
-
- inferior_ptid = null_ptid;
- delete_thread_silent (remote_m32r_ptid);
-}
-
-
-static void
-sdistatus_command (char *args, int from_tty)
-{
- unsigned char buf[4096];
- int i, c;
-
- if (remote_debug)
- fprintf_unfiltered (gdb_stdlog, "m32r_sdireset()\n");
-
- if (!sdi_desc)
- return;
-
- send_cmd (SDI_STATUS);
- for (i = 0; i < 4096; i++)
- {
- c = serial_readchar (sdi_desc, SDI_TIMEOUT);
- if (c < 0)
- return;
- buf[i] = c;
- if (c == 0)
- break;
- }
-
- printf_filtered ("%s", buf);
-}
-
-
-static void
-debug_chaos_command (char *args, int from_tty)
-{
- unsigned char buf[3];
-
- buf[0] = SDI_SET_ATTR;
- buf[1] = SDI_ATTR_CACHE;
- buf[2] = SDI_CACHE_TYPE_CHAOS;
- send_data (buf, 3);
-}
-
-
-static void
-use_debug_dma_command (char *args, int from_tty)
-{
- unsigned char buf[3];
-
- buf[0] = SDI_SET_ATTR;
- buf[1] = SDI_ATTR_MEM_ACCESS;
- buf[2] = SDI_MEM_ACCESS_DEBUG_DMA;
- send_data (buf, 3);
-}
-
-static void
-use_mon_code_command (char *args, int from_tty)
-{
- unsigned char buf[3];
-
- buf[0] = SDI_SET_ATTR;
- buf[1] = SDI_ATTR_MEM_ACCESS;
- buf[2] = SDI_MEM_ACCESS_MON_CODE;
- send_data (buf, 3);
-}
-
-
-static void
-use_ib_breakpoints_command (char *args, int from_tty)
-{
- use_ib_breakpoints = 1;
-}
-
-static void
-use_dbt_breakpoints_command (char *args, int from_tty)
-{
- use_ib_breakpoints = 0;
-}
-
-static int
-m32r_return_one (struct target_ops *target)
-{
- return 1;
-}
-
-/* Implementation of the to_has_execution method. */
-
-static int
-m32r_has_execution (struct target_ops *target, ptid_t the_ptid)
-{
- return 1;
-}
-
-/* Define the target subroutine names. */
-
-struct target_ops m32r_ops;
-
-static void
-init_m32r_ops (void)
-{
- m32r_ops.to_shortname = "m32rsdi";
- m32r_ops.to_longname = "Remote M32R debugging over SDI interface";
- m32r_ops.to_doc = "Use an M32R board using SDI debugging protocol.";
- m32r_ops.to_open = m32r_open;
- m32r_ops.to_close = m32r_close;
- m32r_ops.to_detach = m32r_detach;
- m32r_ops.to_resume = m32r_resume;
- m32r_ops.to_wait = m32r_wait;
- m32r_ops.to_fetch_registers = m32r_fetch_register;
- m32r_ops.to_store_registers = m32r_store_register;
- m32r_ops.to_prepare_to_store = m32r_prepare_to_store;
- m32r_ops.to_xfer_partial = m32r_xfer_partial;
- m32r_ops.to_files_info = m32r_files_info;
- m32r_ops.to_insert_breakpoint = m32r_insert_breakpoint;
- m32r_ops.to_remove_breakpoint = m32r_remove_breakpoint;
- m32r_ops.to_can_use_hw_breakpoint = m32r_can_use_hw_watchpoint;
- m32r_ops.to_insert_watchpoint = m32r_insert_watchpoint;
- m32r_ops.to_remove_watchpoint = m32r_remove_watchpoint;
- m32r_ops.to_stopped_by_watchpoint = m32r_stopped_by_watchpoint;
- m32r_ops.to_stopped_data_address = m32r_stopped_data_address;
- m32r_ops.to_kill = m32r_kill;
- m32r_ops.to_load = m32r_load;
- m32r_ops.to_create_inferior = m32r_create_inferior;
- m32r_ops.to_mourn_inferior = m32r_mourn_inferior;
- m32r_ops.to_interrupt = m32r_interrupt;
- m32r_ops.to_log_command = serial_log_command;
- m32r_ops.to_thread_alive = m32r_thread_alive;
- m32r_ops.to_pid_to_str = m32r_pid_to_str;
- m32r_ops.to_stratum = process_stratum;
- m32r_ops.to_has_all_memory = m32r_return_one;
- m32r_ops.to_has_memory = m32r_return_one;
- m32r_ops.to_has_stack = m32r_return_one;
- m32r_ops.to_has_registers = m32r_return_one;
- m32r_ops.to_has_execution = m32r_has_execution;
- m32r_ops.to_magic = OPS_MAGIC;
-};
-
-
-extern initialize_file_ftype _initialize_remote_m32r;
-
-void
-_initialize_remote_m32r (void)
-{
- int i;
-
- init_m32r_ops ();
-
- /* Initialize breakpoints. */
- for (i = 0; i < MAX_BREAKPOINTS; i++)
- bp_address[i] = 0xffffffff;
-
- /* Initialize access breaks. */
- for (i = 0; i < MAX_ACCESS_BREAKS; i++)
- ab_address[i] = 0x00000000;
-
- add_target (&m32r_ops);
-
- add_com ("sdireset", class_obscure, sdireset_command,
- _("Reset SDI connection."));
-
- add_com ("sdistatus", class_obscure, sdistatus_command,
- _("Show status of SDI connection."));
-
- add_com ("debug_chaos", class_obscure, debug_chaos_command,
- _("Debug M32R/Chaos."));
-
- add_com ("use_debug_dma", class_obscure, use_debug_dma_command,
- _("Use debug DMA mem access."));
- add_com ("use_mon_code", class_obscure, use_mon_code_command,
- _("Use mon code mem access."));
-
- add_com ("use_ib_break", class_obscure, use_ib_breakpoints_command,
- _("Set breakpoints by IB break."));
- add_com ("use_dbt_break", class_obscure, use_dbt_breakpoints_command,
- _("Set breakpoints by dbt."));
-
- /* Yes, 42000 is arbitrary. The only sense out of it, is that it
- isn't 0. */
- remote_m32r_ptid = ptid_build (42000, 0, 42000);
-}
+++ /dev/null
-/* Remote debugging interface for MIPS remote debugging protocol.
-
- Copyright (C) 1993-2016 Free Software Foundation, Inc.
-
- Contributed by Cygnus Support. Written by Ian Lance Taylor
- <ian@cygnus.com>.
-
- This file is part of GDB.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>. */
-
-#include "defs.h"
-#include "inferior.h"
-#include "infrun.h"
-#include "bfd.h"
-#include "symfile.h"
-#include "gdbcmd.h"
-#include "gdbcore.h"
-#include "serial.h"
-#include "target.h"
-#include <sys/stat.h>
-#include "gdb_usleep.h"
-#include "regcache.h"
-#include <ctype.h>
-#include "mips-tdep.h"
-#include "gdbthread.h"
-#include "gdb_bfd.h"
-\f
-
-/* Breakpoint types. Values 0, 1, and 2 must agree with the watch
- types passed by breakpoint.c to target_insert_watchpoint.
- Value 3 is our own invention, and is used for ordinary instruction
- breakpoints. Value 4 is used to mark an unused watchpoint in tables. */
-enum break_type
- {
- BREAK_WRITE, /* 0 */
- BREAK_READ, /* 1 */
- BREAK_ACCESS, /* 2 */
- BREAK_FETCH, /* 3 */
- BREAK_UNUSED /* 4 */
- };
-
-/* Prototypes for local functions. */
-
-static int mips_readchar (int timeout);
-
-static int mips_receive_header (unsigned char *hdr, int *pgarbage,
- int ch, int timeout);
-
-static int mips_receive_trailer (unsigned char *trlr, int *pgarbage,
- int *pch, int timeout);
-
-static int mips_cksum (const unsigned char *hdr,
- const char *data, int len);
-
-static void mips_send_packet (const char *s, int get_ack);
-
-static void mips_send_command (const char *cmd, int prompt);
-
-static int mips_receive_packet (char *buff, int throw_error, int timeout);
-
-static ULONGEST mips_request (int cmd, ULONGEST addr, ULONGEST data,
- int *perr, int timeout, char *buff);
-
-static void mips_initialize (void);
-
-static void mips_close (struct target_ops *self);
-
-static int mips_map_regno (struct gdbarch *, int);
-
-static void mips_set_register (int regno, ULONGEST value);
-
-static void mips_prepare_to_store (struct target_ops *self,
- struct regcache *regcache);
-
-static int mips_fetch_word (CORE_ADDR addr, unsigned int *valp);
-
-static int mips_store_word (CORE_ADDR addr, unsigned int value,
- int *old_contents);
-
-static enum target_xfer_status mips_xfer_memory (gdb_byte *readbuf,
- const gdb_byte *writebuf,
- ULONGEST memaddr,
- ULONGEST len,
- ULONGEST *xfered_len);
-
-static void mips_files_info (struct target_ops *ignore);
-
-static void mips_mourn_inferior (struct target_ops *ops);
-
-static int pmon_makeb64 (unsigned long v, char *p, int n, unsigned int *chksum);
-
-static int pmon_zeroset (int recsize, char **buff, unsigned int *amount,
- unsigned int *chksum);
-
-static int pmon_checkset (int recsize, char **buff, unsigned int *value);
-
-static void pmon_make_fastrec (char **outbuf, unsigned char *inbuf,
- int *inptr, int inamount, int *recsize,
- unsigned int *csum, unsigned int *zerofill);
-
-static int pmon_check_ack (char *mesg);
-
-static void pmon_start_download (void);
-
-static void pmon_end_download (int final, int bintotal);
-
-static void pmon_download (char *buffer, int length);
-
-static void mips_load (struct target_ops *self, const char *file, int from_tty);
-
-static int mips_make_srec (char *buffer, int type, CORE_ADDR memaddr,
- unsigned char *myaddr, int len);
-
-static int mips_set_breakpoint (CORE_ADDR addr, int len, enum break_type type);
-
-static int mips_clear_breakpoint (CORE_ADDR addr, int len,
- enum break_type type);
-
-static int mips_common_breakpoint (int set, CORE_ADDR addr, int len,
- enum break_type type);
-
-/* Forward declarations. */
-extern struct target_ops mips_ops;
-extern struct target_ops pmon_ops;
-extern struct target_ops ddb_ops;
-extern struct target_ops rockhopper_ops;
-\f/* *INDENT-OFF* */
-/* The MIPS remote debugging interface is built on top of a simple
- packet protocol. Each packet is organized as follows:
-
- SYN The first character is always a SYN (ASCII 026, or ^V). SYN
- may not appear anywhere else in the packet. Any time a SYN is
- seen, a new packet should be assumed to have begun.
-
- TYPE_LEN
- This byte contains the upper five bits of the logical length
- of the data section, plus a single bit indicating whether this
- is a data packet or an acknowledgement. The documentation
- indicates that this bit is 1 for a data packet, but the actual
- board uses 1 for an acknowledgement. The value of the byte is
- 0x40 + (ack ? 0x20 : 0) + (len >> 6)
- (we always have 0 <= len < 1024). Acknowledgement packets do
- not carry data, and must have a data length of 0.
-
- LEN1 This byte contains the lower six bits of the logical length of
- the data section. The value is
- 0x40 + (len & 0x3f)
-
- SEQ This byte contains the six bit sequence number of the packet.
- The value is
- 0x40 + seq
- An acknowlegment packet contains the sequence number of the
- packet being acknowledged plus 1 modulo 64. Data packets are
- transmitted in sequence. There may only be one outstanding
- unacknowledged data packet at a time. The sequence numbers
- are independent in each direction. If an acknowledgement for
- the previous packet is received (i.e., an acknowledgement with
- the sequence number of the packet just sent) the packet just
- sent should be retransmitted. If no acknowledgement is
- received within a timeout period, the packet should be
- retransmitted. This has an unfortunate failure condition on a
- high-latency line, as a delayed acknowledgement may lead to an
- endless series of duplicate packets.
-
- DATA The actual data bytes follow. The following characters are
- escaped inline with DLE (ASCII 020, or ^P):
- SYN (026) DLE S
- DLE (020) DLE D
- ^C (003) DLE C
- ^S (023) DLE s
- ^Q (021) DLE q
- The additional DLE characters are not counted in the logical
- length stored in the TYPE_LEN and LEN1 bytes.
-
- CSUM1
- CSUM2
- CSUM3
- These bytes contain an 18 bit checksum of the complete
- contents of the packet excluding the SEQ byte and the
- CSUM[123] bytes. The checksum is simply the twos complement
- addition of all the bytes treated as unsigned characters. The
- values of the checksum bytes are:
- CSUM1: 0x40 + ((cksum >> 12) & 0x3f)
- CSUM2: 0x40 + ((cksum >> 6) & 0x3f)
- CSUM3: 0x40 + (cksum & 0x3f)
-
- It happens that the MIPS remote debugging protocol always
- communicates with ASCII strings. Because of this, this
- implementation doesn't bother to handle the DLE quoting mechanism,
- since it will never be required. */
-/* *INDENT-ON* */
-
-
-/* The SYN character which starts each packet. */
-#define SYN '\026'
-
-/* The 0x40 used to offset each packet (this value ensures that all of
- the header and trailer bytes, other than SYN, are printable ASCII
- characters). */
-#define HDR_OFFSET 0x40
-
-/* The indices of the bytes in the packet header. */
-#define HDR_INDX_SYN 0
-#define HDR_INDX_TYPE_LEN 1
-#define HDR_INDX_LEN1 2
-#define HDR_INDX_SEQ 3
-#define HDR_LENGTH 4
-
-/* The data/ack bit in the TYPE_LEN header byte. */
-#define TYPE_LEN_DA_BIT 0x20
-#define TYPE_LEN_DATA 0
-#define TYPE_LEN_ACK TYPE_LEN_DA_BIT
-
-/* How to compute the header bytes. */
-#define HDR_SET_SYN(data, len, seq) (SYN)
-#define HDR_SET_TYPE_LEN(data, len, seq) \
- (HDR_OFFSET \
- + ((data) ? TYPE_LEN_DATA : TYPE_LEN_ACK) \
- + (((len) >> 6) & 0x1f))
-#define HDR_SET_LEN1(data, len, seq) (HDR_OFFSET + ((len) & 0x3f))
-#define HDR_SET_SEQ(data, len, seq) (HDR_OFFSET + (seq))
-
-/* Check that a header byte is reasonable. */
-#define HDR_CHECK(ch) (((ch) & HDR_OFFSET) == HDR_OFFSET)
-
-/* Get data from the header. These macros evaluate their argument
- multiple times. */
-#define HDR_IS_DATA(hdr) \
- (((hdr)[HDR_INDX_TYPE_LEN] & TYPE_LEN_DA_BIT) == TYPE_LEN_DATA)
-#define HDR_GET_LEN(hdr) \
- ((((hdr)[HDR_INDX_TYPE_LEN] & 0x1f) << 6) + (((hdr)[HDR_INDX_LEN1] & 0x3f)))
-#define HDR_GET_SEQ(hdr) ((unsigned int)(hdr)[HDR_INDX_SEQ] & 0x3f)
-
-/* The maximum data length. */
-#define DATA_MAXLEN 1023
-
-/* The trailer offset. */
-#define TRLR_OFFSET HDR_OFFSET
-
-/* The indices of the bytes in the packet trailer. */
-#define TRLR_INDX_CSUM1 0
-#define TRLR_INDX_CSUM2 1
-#define TRLR_INDX_CSUM3 2
-#define TRLR_LENGTH 3
-
-/* How to compute the trailer bytes. */
-#define TRLR_SET_CSUM1(cksum) (TRLR_OFFSET + (((cksum) >> 12) & 0x3f))
-#define TRLR_SET_CSUM2(cksum) (TRLR_OFFSET + (((cksum) >> 6) & 0x3f))
-#define TRLR_SET_CSUM3(cksum) (TRLR_OFFSET + (((cksum) ) & 0x3f))
-
-/* Check that a trailer byte is reasonable. */
-#define TRLR_CHECK(ch) (((ch) & TRLR_OFFSET) == TRLR_OFFSET)
-
-/* Get data from the trailer. This evaluates its argument multiple
- times. */
-#define TRLR_GET_CKSUM(trlr) \
- ((((trlr)[TRLR_INDX_CSUM1] & 0x3f) << 12) \
- + (((trlr)[TRLR_INDX_CSUM2] & 0x3f) << 6) \
- + ((trlr)[TRLR_INDX_CSUM3] & 0x3f))
-
-/* The sequence number modulos. */
-#define SEQ_MODULOS (64)
-
-/* PMON commands to load from the serial port or UDP socket. */
-#define LOAD_CMD "load -b -s tty0\r"
-#define LOAD_CMD_UDP "load -b -s udp\r"
-
-/* The target vectors for the four different remote MIPS targets.
- These are initialized with code in _initialize_remote_mips instead
- of static initializers, to make it easier to extend the target_ops
- vector later. */
-struct target_ops mips_ops, pmon_ops, ddb_ops, rockhopper_ops, lsi_ops;
-
-enum mips_monitor_type
- {
- /* IDT/SIM monitor being used: */
- MON_IDT,
- /* PMON monitor being used: */
- MON_PMON, /* 3.0.83 [COGENT,EB,FP,NET]
- Algorithmics Ltd. Nov 9 1995 17:19:50 */
- MON_DDB, /* 2.7.473 [DDBVR4300,EL,FP,NET]
- Risq Modular Systems,
- Thu Jun 6 09:28:40 PDT 1996 */
- MON_LSI, /* 4.3.12 [EB,FP],
- LSI LOGIC Corp. Tue Feb 25 13:22:14 1997 */
- MON_ROCKHOPPER,
- /* Last and unused value, for sizing vectors, etc. */
- MON_LAST
- };
-static enum mips_monitor_type mips_monitor = MON_LAST;
-
-/* The monitor prompt text. If the user sets the PMON prompt
- to some new value, the GDB `set monitor-prompt' command must also
- be used to inform GDB about the expected prompt. Otherwise, GDB
- will not be able to connect to PMON in mips_initialize().
- If the `set monitor-prompt' command is not used, the expected
- default prompt will be set according the target:
- target prompt
- ----- -----
- pmon PMON>
- ddb NEC010>
- lsi PMON>
- */
-static char *mips_monitor_prompt;
-
-/* Set to 1 if the target is open. */
-static int mips_is_open;
-
-/* Currently active target description (if mips_is_open == 1). */
-static struct target_ops *current_ops;
-
-/* Set to 1 while the connection is being initialized. */
-static int mips_initializing;
-
-/* Set to 1 while the connection is being brought down. */
-static int mips_exiting;
-
-/* The next sequence number to send. */
-static unsigned int mips_send_seq;
-
-/* The next sequence number we expect to receive. */
-static unsigned int mips_receive_seq;
-
-/* The time to wait before retransmitting a packet, in seconds. */
-static int mips_retransmit_wait = 3;
-
-/* The number of times to try retransmitting a packet before giving up. */
-static int mips_send_retries = 10;
-
-/* The number of garbage characters to accept when looking for an
- SYN for the next packet. */
-static int mips_syn_garbage = 10;
-
-/* The time to wait for a packet, in seconds. */
-static int mips_receive_wait = 5;
-
-/* Set if we have sent a packet to the board but have not yet received
- a reply. */
-static int mips_need_reply = 0;
-
-/* Handle used to access serial I/O stream. */
-static struct serial *mips_desc;
-
-/* UDP handle used to download files to target. */
-static struct serial *udp_desc;
-static int udp_in_use;
-
-/* TFTP filename used to download files to DDB board, in the form
- host:filename. */
-static char *tftp_name; /* host:filename */
-static char *tftp_localname; /* filename portion of above */
-static int tftp_in_use;
-static FILE *tftp_file;
-
-/* Counts the number of times the user tried to interrupt the target (usually
- via ^C. */
-static int interrupt_count;
-
-/* If non-zero, means that the target is running. */
-static int mips_wait_flag = 0;
-
-/* If non-zero, monitor supports breakpoint commands. */
-static int monitor_supports_breakpoints = 0;
-
-/* Data cache header. */
-
-#if 0 /* not used (yet?) */
-static DCACHE *mips_dcache;
-#endif
-
-/* Non-zero means that we've just hit a read or write watchpoint. */
-static int hit_watchpoint;
-
-/* Table of breakpoints/watchpoints (used only on LSI PMON target).
- The table is indexed by a breakpoint number, which is an integer
- from 0 to 255 returned by the LSI PMON when a breakpoint is set. */
-
-#define MAX_LSI_BREAKPOINTS 256
-struct lsi_breakpoint_info
- {
- enum break_type type; /* type of breakpoint */
- CORE_ADDR addr; /* address of breakpoint */
- int len; /* length of region being watched */
- unsigned long value; /* value to watch */
- }
-lsi_breakpoints[MAX_LSI_BREAKPOINTS];
-
-/* Error/warning codes returned by LSI PMON for breakpoint commands.
- Warning values may be ORed together; error values may not. */
-#define W_WARN 0x100 /* This bit is set if the error code
- is a warning */
-#define W_MSK 0x101 /* warning: Range feature is supported
- via mask */
-#define W_VAL 0x102 /* warning: Value check is not
- supported in hardware */
-#define W_QAL 0x104 /* warning: Requested qualifiers are
- not supported in hardware */
-
-#define E_ERR 0x200 /* This bit is set if the error code
- is an error */
-#define E_BPT 0x200 /* error: No such breakpoint number */
-#define E_RGE 0x201 /* error: Range is not supported */
-#define E_QAL 0x202 /* error: The requested qualifiers can
- not be used */
-#define E_OUT 0x203 /* error: Out of hardware resources */
-#define E_NON 0x204 /* error: Hardware breakpoint not supported */
-
-struct lsi_error
- {
- int code; /* error code */
- char *string; /* string associated with this code */
- };
-
-struct lsi_error lsi_warning_table[] =
-{
- {W_MSK, "Range feature is supported via mask"},
- {W_VAL, "Value check is not supported in hardware"},
- {W_QAL, "Requested qualifiers are not supported in hardware"},
- {0, NULL}
-};
-
-struct lsi_error lsi_error_table[] =
-{
- {E_BPT, "No such breakpoint number"},
- {E_RGE, "Range is not supported"},
- {E_QAL, "The requested qualifiers can not be used"},
- {E_OUT, "Out of hardware resources"},
- {E_NON, "Hardware breakpoint not supported"},
- {0, NULL}
-};
-
-/* Set to 1 with the 'set monitor-warnings' command to enable printing
- of warnings returned by PMON when hardware breakpoints are used. */
-static int monitor_warnings;
-
-/* This is the ptid we use while we're connected to the remote. Its
- value is arbitrary, as the remote-mips target doesn't have a notion of
- processes or threads, but we need something non-null to place in
- inferior_ptid. */
-static ptid_t remote_mips_ptid;
-
-/* Close any ports which might be open. Reset certain globals indicating
- the state of those ports. */
-
-static void
-close_ports (void)
-{
- mips_is_open = 0;
- serial_close (mips_desc);
-
- if (udp_in_use)
- {
- serial_close (udp_desc);
- udp_in_use = 0;
- }
- tftp_in_use = 0;
-}
-
-/* Handle low-level error that we can't recover from. Note that just
- error()ing out from target_wait or some such low-level place will cause
- all hell to break loose--the rest of GDB will tend to get left in an
- inconsistent state. */
-
-static void ATTRIBUTE_NORETURN
-mips_error (char *string,...)
-{
- va_list args;
- char *fmt;
-
- target_terminal_ours ();
- wrap_here (""); /* Force out any buffered output. */
- gdb_flush (gdb_stdout);
- gdb_flush (gdb_stderr);
-
- /* Clean up in such a way that mips_close won't try to talk to the
- board (it almost surely won't work since we weren't able to talk to
- it). */
- close_ports ();
-
- if (!ptid_equal (inferior_ptid, null_ptid))
- target_mourn_inferior ();
-
- fmt = concat (_("Ending remote MIPS debugging: "),
- string, (char *) NULL);
- make_cleanup (xfree, fmt);
-
- va_start (args, string);
- throw_verror (TARGET_CLOSE_ERROR, fmt, args);
- va_end (args);
-}
-
-/* putc_readable - print a character, displaying non-printable chars in
- ^x notation or in hex. */
-
-static void
-fputc_readable (int ch, struct ui_file *file)
-{
- if (ch == '\n')
- fputc_unfiltered ('\n', file);
- else if (ch == '\r')
- fprintf_unfiltered (file, "\\r");
- else if (ch < 0x20) /* ASCII control character */
- fprintf_unfiltered (file, "^%c", ch + '@');
- else if (ch >= 0x7f) /* non-ASCII characters (rubout or greater) */
- fprintf_unfiltered (file, "[%02x]", ch & 0xff);
- else
- fputc_unfiltered (ch, file);
-}
-
-
-/* puts_readable - print a string, displaying non-printable chars in
- ^x notation or in hex. */
-
-static void
-fputs_readable (const char *string, struct ui_file *file)
-{
- int c;
-
- while ((c = *string++) != '\0')
- fputc_readable (c, file);
-}
-
-
-/* Read P as a hex value. Return true if every character made sense,
- storing the result in *RESULT. Leave *RESULT unchanged otherwise. */
-
-static int
-read_hex_value (const char *p, ULONGEST *result)
-{
- ULONGEST retval;
-
- retval = 0;
- while (*p != 0)
- {
- retval <<= 4;
- if (*p >= '0' && *p <= '9')
- retval |= *p - '0';
- else if (*p >= 'A' && *p <= 'F')
- retval |= *p - 'A' + 10;
- else if (*p >= 'a' && *p <= 'f')
- retval |= *p - 'a' + 10;
- else
- return 0;
- p++;
- }
- *result = retval;
- return 1;
-}
-
-
-/* Wait until STRING shows up in mips_desc. Returns 1 if successful, else 0 if
- timed out. TIMEOUT specifies timeout value in seconds. */
-
-static int
-mips_expect_timeout (const char *string, int timeout)
-{
- const char *p = string;
-
- if (remote_debug)
- {
- fprintf_unfiltered (gdb_stdlog, "Expected \"");
- fputs_readable (string, gdb_stdlog);
- fprintf_unfiltered (gdb_stdlog, "\", got \"");
- }
-
- immediate_quit++;
- QUIT;
- while (1)
- {
- int c;
-
- /* Must use serial_readchar() here cuz mips_readchar would get
- confused if we were waiting for the mips_monitor_prompt... */
-
- c = serial_readchar (mips_desc, timeout);
-
- if (c == SERIAL_TIMEOUT)
- {
- if (remote_debug)
- fprintf_unfiltered (gdb_stdlog, "\": FAIL\n");
- return 0;
- }
-
- if (remote_debug)
- fputc_readable (c, gdb_stdlog);
-
- if (c == *p++)
- {
- if (*p == '\0')
- {
- immediate_quit--;
- if (remote_debug)
- fprintf_unfiltered (gdb_stdlog, "\": OK\n");
- return 1;
- }
- }
- else
- {
- p = string;
- if (c == *p)
- p++;
- }
- }
-}
-
-/* Wait until STRING shows up in mips_desc. Returns 1 if successful, else 0 if
- timed out. The timeout value is hard-coded to 2 seconds. Use
- mips_expect_timeout if a different timeout value is needed. */
-
-static int
-mips_expect (const char *string)
-{
- return mips_expect_timeout (string, remote_timeout);
-}
-
-/* Read a character from the remote, aborting on error. Returns
- SERIAL_TIMEOUT on timeout (since that's what serial_readchar()
- returns). FIXME: If we see the string mips_monitor_prompt from the
- board, then we are debugging on the main console port, and we have
- somehow dropped out of remote debugging mode. In this case, we
- automatically go back in to remote debugging mode. This is a hack,
- put in because I can't find any way for a program running on the
- remote board to terminate without also ending remote debugging
- mode. I assume users won't have any trouble with this; for one
- thing, the IDT documentation generally assumes that the remote
- debugging port is not the console port. This is, however, very
- convenient for DejaGnu when you only have one connected serial
- port. */
-
-static int
-mips_readchar (int timeout)
-{
- int ch;
- static int state = 0;
- int mips_monitor_prompt_len = strlen (mips_monitor_prompt);
-
- { /* FIXME this whole block is dead code! */
- int i;
-
- i = timeout;
- if (i == -1 && watchdog > 0)
- i = watchdog;
- }
-
- if (state == mips_monitor_prompt_len)
- timeout = 1;
- ch = serial_readchar (mips_desc, timeout);
-
- if (ch == SERIAL_TIMEOUT && timeout == -1) /* Watchdog went off. */
- {
- target_mourn_inferior ();
- error (_("Watchdog has expired. Target detached."));
- }
-
- if (ch == SERIAL_EOF)
- mips_error (_("End of file from remote"));
- if (ch == SERIAL_ERROR)
- mips_error (_("Error reading from remote: %s"), safe_strerror (errno));
- if (remote_debug > 1)
- {
- /* Don't use _filtered; we can't deal with a QUIT out of
- target_wait, and I think this might be called from there. */
- if (ch != SERIAL_TIMEOUT)
- fprintf_unfiltered (gdb_stdlog, "Read '%c' %d 0x%x\n", ch, ch, ch);
- else
- fprintf_unfiltered (gdb_stdlog, "Timed out in read\n");
- }
-
- /* If we have seen mips_monitor_prompt and we either time out, or
- we see a @ (which was echoed from a packet we sent), reset the
- board as described above. The first character in a packet after
- the SYN (which is not echoed) is always an @ unless the packet is
- more than 64 characters long, which ours never are. */
- if ((ch == SERIAL_TIMEOUT || ch == '@')
- && state == mips_monitor_prompt_len
- && !mips_initializing
- && !mips_exiting)
- {
- if (remote_debug > 0)
- /* Don't use _filtered; we can't deal with a QUIT out of
- target_wait, and I think this might be called from there. */
- fprintf_unfiltered (gdb_stdlog,
- "Reinitializing MIPS debugging mode\n");
-
- mips_need_reply = 0;
- mips_initialize ();
-
- state = 0;
-
- /* At this point, about the only thing we can do is abort the command
- in progress and get back to command level as quickly as possible. */
-
- error (_("Remote board reset, debug protocol re-initialized."));
- }
-
- if (ch == mips_monitor_prompt[state])
- ++state;
- else
- state = 0;
-
- return ch;
-}
-
-/* Get a packet header, putting the data in the supplied buffer.
- PGARBAGE is a pointer to the number of garbage characters received
- so far. CH is the last character received. Returns 0 for success,
- or -1 for timeout. */
-
-static int
-mips_receive_header (unsigned char *hdr, int *pgarbage, int ch, int timeout)
-{
- int i;
-
- while (1)
- {
- /* Wait for a SYN. mips_syn_garbage is intended to prevent
- sitting here indefinitely if the board sends us one garbage
- character per second. ch may already have a value from the
- last time through the loop. */
- while (ch != SYN)
- {
- ch = mips_readchar (timeout);
- if (ch == SERIAL_TIMEOUT)
- return -1;
- if (ch != SYN)
- {
- /* Printing the character here lets the user of gdb see
- what the program is outputting, if the debugging is
- being done on the console port. Don't use _filtered:
- we can't deal with a QUIT out of target_wait and
- buffered target output confuses the user. */
- if (!mips_initializing || remote_debug > 0)
- {
- if (isprint (ch) || isspace (ch))
- {
- fputc_unfiltered (ch, gdb_stdtarg);
- }
- else
- {
- fputc_readable (ch, gdb_stdtarg);
- }
- gdb_flush (gdb_stdtarg);
- }
-
- /* Only count unprintable characters. */
- if (! (isprint (ch) || isspace (ch)))
- (*pgarbage) += 1;
-
- if (mips_syn_garbage > 0
- && *pgarbage > mips_syn_garbage)
- mips_error (_("Debug protocol failure: more "
- "than %d characters before a sync."),
- mips_syn_garbage);
- }
- }
-
- /* Get the packet header following the SYN. */
- for (i = 1; i < HDR_LENGTH; i++)
- {
- ch = mips_readchar (timeout);
- if (ch == SERIAL_TIMEOUT)
- return -1;
- /* Make sure this is a header byte. */
- if (ch == SYN || !HDR_CHECK (ch))
- break;
-
- hdr[i] = ch;
- }
-
- /* If we got the complete header, we can return. Otherwise we
- loop around and keep looking for SYN. */
- if (i >= HDR_LENGTH)
- return 0;
- }
-}
-
-/* Get a packet header, putting the data in the supplied buffer.
- PGARBAGE is a pointer to the number of garbage characters received
- so far. The last character read is returned in *PCH. Returns 0
- for success, -1 for timeout, -2 for error. */
-
-static int
-mips_receive_trailer (unsigned char *trlr, int *pgarbage,
- int *pch, int timeout)
-{
- int i;
- int ch;
-
- for (i = 0; i < TRLR_LENGTH; i++)
- {
- ch = mips_readchar (timeout);
- *pch = ch;
- if (ch == SERIAL_TIMEOUT)
- return -1;
- if (!TRLR_CHECK (ch))
- return -2;
- trlr[i] = ch;
- }
- return 0;
-}
-
-/* Get the checksum of a packet. HDR points to the packet header.
- DATASTR points to the packet data. LEN is the length of DATASTR. */
-
-static int
-mips_cksum (const unsigned char *hdr, const char *datastr, int len)
-{
- const unsigned char *p;
- const unsigned char *data = (const unsigned char *) datastr;
- int c;
- int cksum;
-
- cksum = 0;
-
- /* The initial SYN is not included in the checksum. */
- c = HDR_LENGTH - 1;
- p = hdr + 1;
- while (c-- != 0)
- cksum += *p++;
-
- c = len;
- p = data;
- while (c-- != 0)
- cksum += *p++;
-
- return cksum;
-}
-
-/* Send a packet containing the given ASCII string. */
-
-static void
-mips_send_packet (const char *s, int get_ack)
-{
- /* unsigned */ int len;
- unsigned char *packet;
- int cksum;
- int attempt;
-
- len = strlen (s);
- if (len > DATA_MAXLEN)
- mips_error (_("MIPS protocol data packet too long: %s"), s);
-
- packet = (unsigned char *) alloca (HDR_LENGTH + len + TRLR_LENGTH + 1);
-
- packet[HDR_INDX_SYN] = HDR_SET_SYN (1, len, mips_send_seq);
- packet[HDR_INDX_TYPE_LEN] = HDR_SET_TYPE_LEN (1, len, mips_send_seq);
- packet[HDR_INDX_LEN1] = HDR_SET_LEN1 (1, len, mips_send_seq);
- packet[HDR_INDX_SEQ] = HDR_SET_SEQ (1, len, mips_send_seq);
-
- memcpy (packet + HDR_LENGTH, s, len);
-
- cksum = mips_cksum (packet, (char *) packet + HDR_LENGTH, len);
- packet[HDR_LENGTH + len + TRLR_INDX_CSUM1] = TRLR_SET_CSUM1 (cksum);
- packet[HDR_LENGTH + len + TRLR_INDX_CSUM2] = TRLR_SET_CSUM2 (cksum);
- packet[HDR_LENGTH + len + TRLR_INDX_CSUM3] = TRLR_SET_CSUM3 (cksum);
-
- /* Increment the sequence number. This will set mips_send_seq to
- the sequence number we expect in the acknowledgement. */
- mips_send_seq = (mips_send_seq + 1) % SEQ_MODULOS;
-
- /* We can only have one outstanding data packet, so we just wait for
- the acknowledgement here. Keep retransmitting the packet until
- we get one, or until we've tried too many times. */
- for (attempt = 0; attempt < mips_send_retries; attempt++)
- {
- int garbage;
- int ch;
-
- if (remote_debug > 0)
- {
- /* Don't use _filtered; we can't deal with a QUIT out of
- target_wait, and I think this might be called from there. */
- packet[HDR_LENGTH + len + TRLR_LENGTH] = '\0';
- fprintf_unfiltered (gdb_stdlog, "Writing \"%s\"\n", packet + 1);
- }
-
- if (serial_write (mips_desc, packet,
- HDR_LENGTH + len + TRLR_LENGTH) != 0)
- mips_error (_("write to target failed: %s"), safe_strerror (errno));
-
- if (!get_ack)
- return;
-
- garbage = 0;
- ch = 0;
- while (1)
- {
- unsigned char hdr[HDR_LENGTH + 1];
- unsigned char trlr[TRLR_LENGTH + 1];
- int err;
- unsigned int seq;
-
- /* Get the packet header. If we time out, resend the data
- packet. */
- err = mips_receive_header (hdr, &garbage, ch, mips_retransmit_wait);
- if (err != 0)
- break;
-
- ch = 0;
-
- /* If we get a data packet, assume it is a duplicate and
- ignore it. FIXME: If the acknowledgement is lost, this
- data packet may be the packet the remote sends after the
- acknowledgement. */
- if (HDR_IS_DATA (hdr))
- {
- int i;
-
- /* Ignore any errors raised whilst attempting to ignore
- packet. */
-
- len = HDR_GET_LEN (hdr);
-
- for (i = 0; i < len; i++)
- {
- int rch;
-
- rch = mips_readchar (remote_timeout);
- if (rch == SYN)
- {
- ch = SYN;
- break;
- }
- if (rch == SERIAL_TIMEOUT)
- break;
- /* Ignore the character. */
- }
-
- if (i == len)
- (void) mips_receive_trailer (trlr, &garbage, &ch,
- remote_timeout);
-
- /* We don't bother checking the checksum, or providing an
- ACK to the packet. */
- continue;
- }
-
- /* If the length is not 0, this is a garbled packet. */
- if (HDR_GET_LEN (hdr) != 0)
- continue;
-
- /* Get the packet trailer. */
- err = mips_receive_trailer (trlr, &garbage, &ch,
- mips_retransmit_wait);
-
- /* If we timed out, resend the data packet. */
- if (err == -1)
- break;
-
- /* If we got a bad character, reread the header. */
- if (err != 0)
- continue;
-
- /* If the checksum does not match the trailer checksum, this
- is a bad packet; ignore it. */
- if (mips_cksum (hdr, NULL, 0) != TRLR_GET_CKSUM (trlr))
- continue;
-
- if (remote_debug > 0)
- {
- hdr[HDR_LENGTH] = '\0';
- trlr[TRLR_LENGTH] = '\0';
- /* Don't use _filtered; we can't deal with a QUIT out of
- target_wait, and I think this might be called from there. */
- fprintf_unfiltered (gdb_stdlog, "Got ack %d \"%s%s\"\n",
- HDR_GET_SEQ (hdr), hdr + 1, trlr);
- }
-
- /* If this ack is for the current packet, we're done. */
- seq = HDR_GET_SEQ (hdr);
- if (seq == mips_send_seq)
- return;
-
- /* If this ack is for the last packet, resend the current
- packet. */
- if ((seq + 1) % SEQ_MODULOS == mips_send_seq)
- break;
-
- /* Otherwise this is a bad ack; ignore it. Increment the
- garbage count to ensure that we do not stay in this loop
- forever. */
- ++garbage;
- }
- }
-
- mips_error (_("Remote did not acknowledge packet"));
-}
-
-/* Receive and acknowledge a packet, returning the data in BUFF (which
- should be DATA_MAXLEN + 1 bytes). The protocol documentation
- implies that only the sender retransmits packets, so this code just
- waits silently for a packet. It returns the length of the received
- packet. If THROW_ERROR is nonzero, call error() on errors. If not,
- don't print an error message and return -1. */
-
-static int
-mips_receive_packet (char *buff, int throw_error, int timeout)
-{
- int ch;
- int garbage;
- int len;
- unsigned char ack[HDR_LENGTH + TRLR_LENGTH + 1];
- int cksum;
-
- ch = 0;
- garbage = 0;
- while (1)
- {
- unsigned char hdr[HDR_LENGTH];
- unsigned char trlr[TRLR_LENGTH];
- int i;
- int err;
-
- if (mips_receive_header (hdr, &garbage, ch, timeout) != 0)
- {
- if (throw_error)
- mips_error (_("Timed out waiting for remote packet"));
- else
- return -1;
- }
-
- ch = 0;
-
- /* An acknowledgement is probably a duplicate; ignore it. */
- if (!HDR_IS_DATA (hdr))
- {
- len = HDR_GET_LEN (hdr);
- /* Check if the length is valid for an ACK, we may aswell
- try and read the remainder of the packet: */
- if (len == 0)
- {
- /* Ignore the error condition, since we are going to
- ignore the packet anyway. */
- (void) mips_receive_trailer (trlr, &garbage, &ch, timeout);
- }
- /* Don't use _filtered; we can't deal with a QUIT out of
- target_wait, and I think this might be called from there. */
- if (remote_debug > 0)
- fprintf_unfiltered (gdb_stdlog, "Ignoring unexpected ACK\n");
- continue;
- }
-
- len = HDR_GET_LEN (hdr);
- for (i = 0; i < len; i++)
- {
- int rch;
-
- rch = mips_readchar (timeout);
- if (rch == SYN)
- {
- ch = SYN;
- break;
- }
- if (rch == SERIAL_TIMEOUT)
- {
- if (throw_error)
- mips_error (_("Timed out waiting for remote packet"));
- else
- return -1;
- }
- buff[i] = rch;
- }
-
- if (i < len)
- {
- /* Don't use _filtered; we can't deal with a QUIT out of
- target_wait, and I think this might be called from there. */
- if (remote_debug > 0)
- fprintf_unfiltered (gdb_stdlog,
- "Got new SYN after %d chars (wanted %d)\n",
- i, len);
- continue;
- }
-
- err = mips_receive_trailer (trlr, &garbage, &ch, timeout);
- if (err == -1)
- {
- if (throw_error)
- mips_error (_("Timed out waiting for packet"));
- else
- return -1;
- }
- if (err == -2)
- {
- /* Don't use _filtered; we can't deal with a QUIT out of
- target_wait, and I think this might be called from there. */
- if (remote_debug > 0)
- fprintf_unfiltered (gdb_stdlog, "Got SYN when wanted trailer\n");
- continue;
- }
-
- /* If this is the wrong sequence number, ignore it. */
- if (HDR_GET_SEQ (hdr) != mips_receive_seq)
- {
- /* Don't use _filtered; we can't deal with a QUIT out of
- target_wait, and I think this might be called from there. */
- if (remote_debug > 0)
- fprintf_unfiltered (gdb_stdlog,
- "Ignoring sequence number %d (want %d)\n",
- HDR_GET_SEQ (hdr), mips_receive_seq);
- continue;
- }
-
- if (mips_cksum (hdr, buff, len) == TRLR_GET_CKSUM (trlr))
- break;
-
- if (remote_debug > 0)
- /* Don't use _filtered; we can't deal with a QUIT out of
- target_wait, and I think this might be called from there. */
- printf_unfiltered ("Bad checksum; data %d, trailer %d\n",
- mips_cksum (hdr, buff, len),
- TRLR_GET_CKSUM (trlr));
-
- /* The checksum failed. Send an acknowledgement for the
- previous packet to tell the remote to resend the packet. */
- ack[HDR_INDX_SYN] = HDR_SET_SYN (0, 0, mips_receive_seq);
- ack[HDR_INDX_TYPE_LEN] = HDR_SET_TYPE_LEN (0, 0, mips_receive_seq);
- ack[HDR_INDX_LEN1] = HDR_SET_LEN1 (0, 0, mips_receive_seq);
- ack[HDR_INDX_SEQ] = HDR_SET_SEQ (0, 0, mips_receive_seq);
-
- cksum = mips_cksum (ack, NULL, 0);
-
- ack[HDR_LENGTH + TRLR_INDX_CSUM1] = TRLR_SET_CSUM1 (cksum);
- ack[HDR_LENGTH + TRLR_INDX_CSUM2] = TRLR_SET_CSUM2 (cksum);
- ack[HDR_LENGTH + TRLR_INDX_CSUM3] = TRLR_SET_CSUM3 (cksum);
-
- if (remote_debug > 0)
- {
- ack[HDR_LENGTH + TRLR_LENGTH] = '\0';
- /* Don't use _filtered; we can't deal with a QUIT out of
- target_wait, and I think this might be called from there. */
- printf_unfiltered ("Writing ack %d \"%s\"\n", mips_receive_seq,
- ack + 1);
- }
-
- if (serial_write (mips_desc, ack, HDR_LENGTH + TRLR_LENGTH) != 0)
- {
- if (throw_error)
- mips_error (_("write to target failed: %s"),
- safe_strerror (errno));
- else
- return -1;
- }
- }
-
- if (remote_debug > 0)
- {
- buff[len] = '\0';
- /* Don't use _filtered; we can't deal with a QUIT out of
- target_wait, and I think this might be called from there. */
- printf_unfiltered ("Got packet \"%s\"\n", buff);
- }
-
- /* We got the packet. Send an acknowledgement. */
- mips_receive_seq = (mips_receive_seq + 1) % SEQ_MODULOS;
-
- ack[HDR_INDX_SYN] = HDR_SET_SYN (0, 0, mips_receive_seq);
- ack[HDR_INDX_TYPE_LEN] = HDR_SET_TYPE_LEN (0, 0, mips_receive_seq);
- ack[HDR_INDX_LEN1] = HDR_SET_LEN1 (0, 0, mips_receive_seq);
- ack[HDR_INDX_SEQ] = HDR_SET_SEQ (0, 0, mips_receive_seq);
-
- cksum = mips_cksum (ack, NULL, 0);
-
- ack[HDR_LENGTH + TRLR_INDX_CSUM1] = TRLR_SET_CSUM1 (cksum);
- ack[HDR_LENGTH + TRLR_INDX_CSUM2] = TRLR_SET_CSUM2 (cksum);
- ack[HDR_LENGTH + TRLR_INDX_CSUM3] = TRLR_SET_CSUM3 (cksum);
-
- if (remote_debug > 0)
- {
- ack[HDR_LENGTH + TRLR_LENGTH] = '\0';
- /* Don't use _filtered; we can't deal with a QUIT out of
- target_wait, and I think this might be called from there. */
- printf_unfiltered ("Writing ack %d \"%s\"\n", mips_receive_seq,
- ack + 1);
- }
-
- if (serial_write (mips_desc, ack, HDR_LENGTH + TRLR_LENGTH) != 0)
- {
- if (throw_error)
- mips_error (_("write to target failed: %s"), safe_strerror (errno));
- else
- return -1;
- }
-
- return len;
-}
-\f
-/* Optionally send a request to the remote system and optionally wait
- for the reply. This implements the remote debugging protocol,
- which is built on top of the packet protocol defined above. Each
- request has an ADDR argument and a DATA argument. The following
- requests are defined:
-
- \0 don't send a request; just wait for a reply
- i read word from instruction space at ADDR
- d read word from data space at ADDR
- I write DATA to instruction space at ADDR
- D write DATA to data space at ADDR
- r read register number ADDR
- R set register number ADDR to value DATA
- c continue execution (if ADDR != 1, set pc to ADDR)
- s single step (if ADDR != 1, set pc to ADDR)
-
- The read requests return the value requested. The write requests
- return the previous value in the changed location. The execution
- requests return a UNIX wait value (the approximate signal which
- caused execution to stop is in the upper eight bits).
-
- If PERR is not NULL, this function waits for a reply. If an error
- occurs, it sets *PERR to 1 and sets errno according to what the
- target board reports. */
-
-static ULONGEST
-mips_request (int cmd,
- ULONGEST addr,
- ULONGEST data,
- int *perr,
- int timeout,
- char *buff)
-{
- int addr_size = gdbarch_addr_bit (target_gdbarch ()) / 8;
- char myBuff[DATA_MAXLEN + 1];
- char response_string[17];
- int len;
- int rpid;
- char rcmd;
- int rerrflg;
- ULONGEST rresponse;
-
- if (buff == (char *) NULL)
- buff = myBuff;
-
- if (cmd != '\0')
- {
- if (mips_need_reply)
- internal_error (__FILE__, __LINE__,
- _("mips_request: Trying to send "
- "command before reply"));
- /* 'T' sets a register to a 64-bit value, so make sure we use
- the right conversion function. */
- if (cmd == 'T')
- sprintf (buff, "0x0 %c 0x%s 0x%s", cmd,
- phex_nz (addr, addr_size), phex_nz (data, 8));
- else
- sprintf (buff, "0x0 %c 0x%s 0x%s", cmd,
- phex_nz (addr, addr_size), phex_nz (data, addr_size));
-
- mips_send_packet (buff, 1);
- mips_need_reply = 1;
- }
-
- if (perr == (int *) NULL)
- return 0;
-
- if (!mips_need_reply)
- internal_error (__FILE__, __LINE__,
- _("mips_request: Trying to get reply before command"));
-
- mips_need_reply = 0;
-
- len = mips_receive_packet (buff, 1, timeout);
- buff[len] = '\0';
-
- if (sscanf (buff, "0x%x %c 0x%x 0x%16s",
- &rpid, &rcmd, &rerrflg, response_string) != 4
- || !read_hex_value (response_string, &rresponse)
- || (cmd != '\0' && rcmd != cmd))
- mips_error (_("Bad response from remote board"));
-
- if (rerrflg != 0)
- {
- *perr = 1;
-
- /* FIXME: This will returns MIPS errno numbers, which may or may
- not be the same as errno values used on other systems. If
- they stick to common errno values, they will be the same, but
- if they don't, they must be translated. */
- errno = rresponse;
-
- return 0;
- }
-
- *perr = 0;
- return rresponse;
-}
-
-/* Cleanup associated with mips_initialize(). */
-
-static void
-mips_initialize_cleanups (void *arg)
-{
- mips_initializing = 0;
-}
-
-/* Cleanup associated with mips_exit_debug(). */
-
-static void
-mips_exit_cleanups (void *arg)
-{
- mips_exiting = 0;
-}
-
-/* Send a command and wait for that command to be echoed back. Wait,
- too, for the following prompt. */
-
-static void
-mips_send_command (const char *cmd, int prompt)
-{
- serial_write (mips_desc, cmd, strlen (cmd));
- mips_expect (cmd);
- mips_expect ("\n");
- if (prompt)
- mips_expect (mips_monitor_prompt);
-}
-
-/* Enter remote (dbx) debug mode: */
-
-static void
-mips_enter_debug (void)
-{
- /* Reset the sequence numbers, ready for the new debug sequence: */
- mips_send_seq = 0;
- mips_receive_seq = 0;
-
- if (mips_monitor != MON_IDT)
- mips_send_command ("debug\r", 0);
- else /* Assume IDT monitor by default. */
- mips_send_command ("db tty0\r", 0);
-
- gdb_usleep (1000000);
- serial_write (mips_desc, "\r", sizeof "\r" - 1);
-
- /* We don't need to absorb any spurious characters here, since the
- mips_receive_header will eat up a reasonable number of characters
- whilst looking for the SYN, however this avoids the "garbage"
- being displayed to the user. */
- if (mips_monitor != MON_IDT)
- mips_expect ("\r");
-
- {
- char buff[DATA_MAXLEN + 1];
-
- if (mips_receive_packet (buff, 1, 3) < 0)
- mips_error (_("Failed to initialize (didn't receive packet)."));
- }
-}
-
-/* Exit remote (dbx) debug mode, returning to the monitor prompt: */
-
-static int
-mips_exit_debug (void)
-{
- int err;
- struct cleanup *old_cleanups = make_cleanup (mips_exit_cleanups, NULL);
-
- mips_exiting = 1;
-
- if (mips_monitor != MON_IDT && mips_monitor != MON_ROCKHOPPER)
- {
- /* The DDB (NEC) and MiniRISC (LSI) versions of PMON exit immediately,
- so we do not get a reply to this command: */
- mips_request ('x', 0, 0, NULL, mips_receive_wait, NULL);
- mips_need_reply = 0;
- if (!mips_expect (" break!"))
- {
- do_cleanups (old_cleanups);
- return -1;
- }
- }
- else
- mips_request ('x', 0, 0, &err, mips_receive_wait, NULL);
-
- if (!mips_expect (mips_monitor_prompt))
- {
- do_cleanups (old_cleanups);
- return -1;
- }
-
- do_cleanups (old_cleanups);
-
- return 0;
-}
-
-/* Initialize a new connection to the MIPS board, and make sure we are
- really connected. */
-
-static void
-mips_initialize (void)
-{
- int err;
- struct cleanup *old_cleanups;
- int j;
-
- /* What is this code doing here? I don't see any way it can happen, and
- it might mean mips_initializing didn't get cleared properly.
- So I'll make it a warning. */
-
- if (mips_initializing)
- {
- warning (_("internal error: mips_initialize called twice"));
- return;
- }
-
- old_cleanups = make_cleanup (mips_initialize_cleanups, NULL);
-
- mips_wait_flag = 0;
- mips_initializing = 1;
-
- /* At this point, the packit protocol isn't responding. We'll try getting
- into the monitor, and restarting the protocol. */
-
- /* Force the system into the monitor. After this we *should* be at
- the mips_monitor_prompt. */
- if (mips_monitor != MON_IDT)
- j = 0; /* Start by checking if we are already
- at the prompt. */
- else
- j = 1; /* Start by sending a break. */
- for (; j <= 4; j++)
- {
- switch (j)
- {
- case 0: /* First, try sending a CR. */
- serial_flush_input (mips_desc);
- serial_write (mips_desc, "\r", 1);
- break;
- case 1: /* First, try sending a break. */
- serial_send_break (mips_desc);
- break;
- case 2: /* Then, try a ^C. */
- serial_write (mips_desc, "\003", 1);
- break;
- case 3: /* Then, try escaping from download. */
- {
- if (mips_monitor != MON_IDT)
- {
- char tbuff[7];
-
- /* We shouldn't need to send multiple termination
- sequences, since the target performs line (or
- block) reads, and then processes those
- packets. In-case we were downloading a large packet
- we flush the output buffer before inserting a
- termination sequence. */
- serial_flush_output (mips_desc);
- sprintf (tbuff, "\r/E/E\r");
- serial_write (mips_desc, tbuff, 6);
- }
- else
- {
- char srec[10];
- int i;
-
- /* We are possibly in binary download mode, having
- aborted in the middle of an S-record. ^C won't
- work because of binary mode. The only reliable way
- out is to send enough termination packets (8 bytes)
- to fill up and then overflow the largest size
- S-record (255 bytes in this case). This amounts to
- 256/8 + 1 packets. */
-
- mips_make_srec (srec, '7', 0, NULL, 0);
-
- for (i = 1; i <= 33; i++)
- {
- serial_write (mips_desc, srec, 8);
-
- if (serial_readchar (mips_desc, 0) >= 0)
- break; /* Break immediatly if we get something from
- the board. */
- }
- }
- }
- break;
- case 4:
- mips_error (_("Failed to initialize."));
- }
-
- if (mips_expect (mips_monitor_prompt))
- break;
- }
-
- if (mips_monitor != MON_IDT)
- {
- /* Sometimes PMON ignores the first few characters in the first
- command sent after a load. Sending a blank command gets
- around that. */
- mips_send_command ("\r", -1);
-
- /* Ensure the correct target state: */
- if (mips_monitor != MON_LSI)
- mips_send_command ("set regsize 64\r", -1);
- mips_send_command ("set hostport tty0\r", -1);
- mips_send_command ("set brkcmd \"\"\r", -1);
- /* Delete all the current breakpoints: */
- mips_send_command ("db *\r", -1);
- /* NOTE: PMON does not have breakpoint support through the
- "debug" mode, only at the monitor command-line. */
- }
-
- mips_enter_debug ();
-
- /* Clear all breakpoints: */
- if ((mips_monitor == MON_IDT
- && mips_clear_breakpoint (-1, 0, BREAK_UNUSED) == 0)
- || mips_monitor == MON_LSI)
- monitor_supports_breakpoints = 1;
- else
- monitor_supports_breakpoints = 0;
-
- do_cleanups (old_cleanups);
-
- /* If this doesn't call error, we have connected; we don't care if
- the request itself succeeds or fails. */
-
- mips_request ('r', 0, 0, &err, mips_receive_wait, NULL);
-}
-
-/* Open a connection to the remote board. */
-
-static void
-common_open (struct target_ops *ops, const char *name, int from_tty,
- enum mips_monitor_type new_monitor,
- const char *new_monitor_prompt)
-{
- char *serial_port_name;
- char *remote_name = 0;
- char *local_name = 0;
- char **argv;
- struct cleanup *cleanup;
-
- if (name == 0)
- error (_("\
-To open a MIPS remote debugging connection, you need to specify what\n\
-serial device is attached to the target board (e.g., /dev/ttya).\n\
-If you want to use TFTP to download to the board, specify the name of a\n\
-temporary file to be used by GDB for downloads as the second argument.\n\
-This filename must be in the form host:filename, where host is the name\n\
-of the host running the TFTP server, and the file must be readable by the\n\
-world. If the local name of the temporary file differs from the name as\n\
-seen from the board via TFTP, specify that name as the third parameter.\n"));
-
- /* Parse the serial port name, the optional TFTP name, and the
- optional local TFTP name. */
- argv = gdb_buildargv (name);
- cleanup = make_cleanup_freeargv (argv);
-
- serial_port_name = xstrdup (argv[0]);
- if (argv[1]) /* Remote TFTP name specified? */
- {
- remote_name = argv[1];
- if (argv[2]) /* Local TFTP filename specified? */
- local_name = argv[2];
- }
-
- target_preopen (from_tty);
-
- if (mips_is_open)
- unpush_target (current_ops);
-
- /* Open and initialize the serial port. */
- mips_desc = serial_open (serial_port_name);
- if (mips_desc == NULL)
- perror_with_name (serial_port_name);
-
- if (baud_rate != -1)
- {
- if (serial_setbaudrate (mips_desc, baud_rate))
- {
- serial_close (mips_desc);
- perror_with_name (serial_port_name);
- }
- }
-
- serial_raw (mips_desc);
-
- /* Open and initialize the optional download port. If it is in the form
- hostname#portnumber, it's a UDP socket. If it is in the form
- hostname:filename, assume it's the TFTP filename that must be
- passed to the DDB board to tell it where to get the load file. */
- if (remote_name)
- {
- if (strchr (remote_name, '#'))
- {
- udp_desc = serial_open (remote_name);
- if (!udp_desc)
- perror_with_name (_("Unable to open UDP port"));
- udp_in_use = 1;
- }
- else
- {
- /* Save the remote and local names of the TFTP temp file. If
- the user didn't specify a local name, assume it's the same
- as the part of the remote name after the "host:". */
- if (tftp_name)
- xfree (tftp_name);
- if (tftp_localname)
- xfree (tftp_localname);
- if (local_name == NULL)
- if ((local_name = strchr (remote_name, ':')) != NULL)
- local_name++; /* Skip over the colon. */
- if (local_name == NULL)
- local_name = remote_name; /* Local name same as remote name. */
- tftp_name = xstrdup (remote_name);
- tftp_localname = xstrdup (local_name);
- tftp_in_use = 1;
- }
- }
-
- current_ops = ops;
- mips_is_open = 1;
-
- /* Reset the expected monitor prompt if it's never been set before. */
- if (mips_monitor_prompt == NULL)
- mips_monitor_prompt = xstrdup (new_monitor_prompt);
- mips_monitor = new_monitor;
-
- mips_initialize ();
-
- if (from_tty)
- printf_unfiltered ("Remote MIPS debugging using %s\n", serial_port_name);
-
- /* Switch to using remote target now. */
- push_target (ops);
-
- inferior_ptid = remote_mips_ptid;
- inferior_appeared (current_inferior (), ptid_get_pid (inferior_ptid));
- add_thread_silent (inferior_ptid);
-
- /* Try to figure out the processor model if possible. */
- deprecated_mips_set_processor_regs_hack ();
-
- /* This is really the job of start_remote however, that makes an
- assumption that the target is about to print out a status message
- of some sort. That doesn't happen here (in fact, it may not be
- possible to get the monitor to send the appropriate packet). */
-
- reinit_frame_cache ();
- registers_changed ();
- stop_pc = regcache_read_pc (get_current_regcache ());
- print_stack_frame (get_selected_frame (NULL), 0, SRC_AND_LOC, 1);
- xfree (serial_port_name);
-
- do_cleanups (cleanup);
-}
-
-/* Open a connection to an IDT board. */
-
-static void
-mips_open (const char *name, int from_tty)
-{
- const char *monitor_prompt = NULL;
- if (gdbarch_bfd_arch_info (target_gdbarch ()) != NULL
- && gdbarch_bfd_arch_info (target_gdbarch ())->arch == bfd_arch_mips)
- {
- switch (gdbarch_bfd_arch_info (target_gdbarch ())->mach)
- {
- case bfd_mach_mips4100:
- case bfd_mach_mips4300:
- case bfd_mach_mips4600:
- case bfd_mach_mips4650:
- case bfd_mach_mips5000:
- monitor_prompt = "<RISQ> ";
- break;
- }
- }
- if (monitor_prompt == NULL)
- monitor_prompt = "<IDT>";
- common_open (&mips_ops, name, from_tty, MON_IDT, monitor_prompt);
-}
-
-/* Open a connection to a PMON board. */
-
-static void
-pmon_open (const char *name, int from_tty)
-{
- common_open (&pmon_ops, name, from_tty, MON_PMON, "PMON> ");
-}
-
-/* Open a connection to a DDB board. */
-
-static void
-ddb_open (const char *name, int from_tty)
-{
- common_open (&ddb_ops, name, from_tty, MON_DDB, "NEC010>");
-}
-
-/* Open a connection to a rockhopper board. */
-
-static void
-rockhopper_open (const char *name, int from_tty)
-{
- common_open (&rockhopper_ops, name, from_tty, MON_ROCKHOPPER, "NEC01>");
-}
-
-/* Open a connection to an LSI board. */
-
-static void
-lsi_open (const char *name, int from_tty)
-{
- int i;
-
- /* Clear the LSI breakpoint table. */
- for (i = 0; i < MAX_LSI_BREAKPOINTS; i++)
- lsi_breakpoints[i].type = BREAK_UNUSED;
-
- common_open (&lsi_ops, name, from_tty, MON_LSI, "PMON> ");
-}
-
-/* Close a connection to the remote board. */
-
-static void
-mips_close (struct target_ops *self)
-{
- if (mips_is_open)
- {
- /* Get the board out of remote debugging mode. */
- (void) mips_exit_debug ();
-
- close_ports ();
- }
-
- generic_mourn_inferior ();
-}
-
-/* Detach from the remote board. */
-
-static void
-mips_detach (struct target_ops *ops, const char *args, int from_tty)
-{
- if (args)
- error (_("Argument given to \"detach\" when remotely debugging."));
-
- unpush_target (ops);
-
- if (from_tty)
- printf_unfiltered ("Ending remote MIPS debugging.\n");
-}
-
-/* Tell the target board to resume. This does not wait for a reply
- from the board, except in the case of single-stepping on LSI boards,
- where PMON does return a reply. */
-
-static void
-mips_resume (struct target_ops *ops,
- ptid_t ptid, int step, enum gdb_signal siggnal)
-{
- int err;
-
- /* LSI PMON requires returns a reply packet "0x1 s 0x0 0x57f" after
- a single step, so we wait for that. */
- mips_request (step ? 's' : 'c', 1, siggnal,
- mips_monitor == MON_LSI && step ? &err : (int *) NULL,
- mips_receive_wait, NULL);
-}
-
-/* Return the signal corresponding to SIG, where SIG is the number which
- the MIPS protocol uses for the signal. */
-
-static enum gdb_signal
-mips_signal_from_protocol (int sig)
-{
- /* We allow a few more signals than the IDT board actually returns, on
- the theory that there is at least *some* hope that perhaps the numbering
- for these signals is widely agreed upon. */
- if (sig <= 0
- || sig > 31)
- return GDB_SIGNAL_UNKNOWN;
-
- /* Don't want to use gdb_signal_from_host because we are converting
- from MIPS signal numbers, not host ones. Our internal numbers
- match the MIPS numbers for the signals the board can return, which
- are: SIGINT, SIGSEGV, SIGBUS, SIGILL, SIGFPE, SIGTRAP. */
- return (enum gdb_signal) sig;
-}
-
-/* Set the register designated by REGNO to the value designated by VALUE. */
-
-static void
-mips_set_register (int regno, ULONGEST value)
-{
- gdb_byte buf[MAX_REGISTER_SIZE];
- struct regcache *regcache = get_current_regcache ();
- struct gdbarch *gdbarch = get_regcache_arch (regcache);
- enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
-
- /* We got the number the register holds, but gdb expects to see a
- value in the target byte ordering. */
-
- if (mips_monitor != MON_ROCKHOPPER
- && (regno == mips_regnum (gdbarch)->pc || regno < 32))
- /* Some 64-bit boards have monitors that only send the bottom 32 bits.
- In such cases we can only really debug 32-bit code properly so,
- when reading a GPR or the PC, assume that the full 64-bit
- value is the sign extension of the lower 32 bits. */
- store_signed_integer (buf, register_size (gdbarch, regno), byte_order,
- value);
- else
- store_unsigned_integer (buf, register_size (gdbarch, regno), byte_order,
- value);
-
- regcache_raw_supply (regcache, regno, buf);
-}
-
-/* Wait until the remote stops, and return a wait status. */
-
-static ptid_t
-mips_wait (struct target_ops *ops,
- ptid_t ptid, struct target_waitstatus *status, int options)
-{
- int rstatus;
- int err;
- char buff[DATA_MAXLEN];
- ULONGEST rpc, rfp, rsp;
- char pc_string[17], fp_string[17], sp_string[17], flags[20];
- int nfields;
-
- interrupt_count = 0;
- hit_watchpoint = 0;
-
- /* If we have not sent a single step or continue command, then the
- board is waiting for us to do something. Return a status
- indicating that it is stopped. */
- if (!mips_need_reply)
- {
- status->kind = TARGET_WAITKIND_STOPPED;
- status->value.sig = GDB_SIGNAL_TRAP;
- return inferior_ptid;
- }
-
- /* No timeout; we sit here as long as the program continues to execute. */
- mips_wait_flag = 1;
- rstatus = mips_request ('\000', 0, 0, &err, -1, buff);
- mips_wait_flag = 0;
- if (err)
- mips_error (_("Remote failure: %s"), safe_strerror (errno));
-
- /* On returning from a continue, the PMON monitor seems to start
- echoing back the messages we send prior to sending back the
- ACK. The code can cope with this, but to try and avoid the
- unnecessary serial traffic, and "spurious" characters displayed
- to the user, we cheat and reset the debug protocol. The problems
- seems to be caused by a check on the number of arguments, and the
- command length, within the monitor causing it to echo the command
- as a bad packet. */
- if (mips_monitor == MON_PMON)
- {
- mips_exit_debug ();
- mips_enter_debug ();
- }
-
- /* See if we got back extended status. If so, pick out the pc, fp,
- sp, etc... */
-
- nfields = sscanf (buff,
- "0x%*x %*c 0x%*x 0x%*x 0x%16s 0x%16s 0x%16s 0x%*x %s",
- pc_string, fp_string, sp_string, flags);
- if (nfields >= 3
- && read_hex_value (pc_string, &rpc)
- && read_hex_value (fp_string, &rfp)
- && read_hex_value (sp_string, &rsp))
- {
- struct regcache *regcache = get_current_regcache ();
- struct gdbarch *gdbarch = get_regcache_arch (regcache);
-
- mips_set_register (gdbarch_pc_regnum (gdbarch), rpc);
- mips_set_register (30, rfp);
- mips_set_register (gdbarch_sp_regnum (gdbarch), rsp);
-
- if (nfields == 9)
- {
- int i;
-
- for (i = 0; i <= 2; i++)
- if (flags[i] == 'r' || flags[i] == 'w')
- hit_watchpoint = 1;
- else if (flags[i] == '\000')
- break;
- }
- }
-
- if (strcmp (target_shortname, "lsi") == 0)
- {
-#if 0
- /* If this is an LSI PMON target, see if we just hit a
- hardrdware watchpoint. Right now, PMON doesn't give us
- enough information to determine which breakpoint we hit. So
- we have to look up the PC in our own table of breakpoints,
- and if found, assume it's just a normal instruction fetch
- breakpoint, not a data watchpoint. FIXME when PMON provides
- some way to tell us what type of breakpoint it is. */
- int i;
- CORE_ADDR pc = regcache_read_pc (get_current_regcache ());
-
- hit_watchpoint = 1;
- for (i = 0; i < MAX_LSI_BREAKPOINTS; i++)
- {
- if (lsi_breakpoints[i].addr == pc
- && lsi_breakpoints[i].type == BREAK_FETCH)
- {
- hit_watchpoint = 0;
- break;
- }
- }
-#else
- /* If a data breakpoint was hit, PMON returns the following packet:
- 0x1 c 0x0 0x57f 0x1
- The return packet from an ordinary breakpoint doesn't have the
- extra 0x01 field tacked onto the end. */
- if (nfields == 1 && rpc == 1)
- hit_watchpoint = 1;
-#endif
- }
-
- /* NOTE: The following (sig) numbers are defined by PMON:
- SPP_SIGTRAP 5 breakpoint
- SPP_SIGINT 2
- SPP_SIGSEGV 11
- SPP_SIGBUS 10
- SPP_SIGILL 4
- SPP_SIGFPE 8
- SPP_SIGTERM 15 */
-
- /* Translate a MIPS waitstatus. We use constants here rather than WTERMSIG
- and so on, because the constants we want here are determined by the
- MIPS protocol and have nothing to do with what host we are running on. */
- if ((rstatus & 0xff) == 0)
- {
- status->kind = TARGET_WAITKIND_EXITED;
- status->value.integer = (((rstatus) >> 8) & 0xff);
- }
- else if ((rstatus & 0xff) == 0x7f)
- {
- status->kind = TARGET_WAITKIND_STOPPED;
- status->value.sig = mips_signal_from_protocol (((rstatus) >> 8) & 0xff);
-
- /* If the stop PC is in the _exit function, assume
- we hit the 'break 0x3ff' instruction in _exit, so this
- is not a normal breakpoint. */
- if (strcmp (target_shortname, "lsi") == 0)
- {
- const char *func_name;
- CORE_ADDR func_start;
- CORE_ADDR pc = regcache_read_pc (get_current_regcache ());
-
- find_pc_partial_function (pc, &func_name, &func_start, NULL);
- if (func_name != NULL && strcmp (func_name, "_exit") == 0
- && func_start == pc)
- status->kind = TARGET_WAITKIND_EXITED;
- }
- }
- else
- {
- status->kind = TARGET_WAITKIND_SIGNALLED;
- status->value.sig = mips_signal_from_protocol (rstatus & 0x7f);
- }
-
- return inferior_ptid;
-}
-
-/* We have to map between the register numbers used by gdb and the
- register numbers used by the debugging protocol. */
-
-#define REGNO_OFFSET 96
-
-static int
-mips_map_regno (struct gdbarch *gdbarch, int regno)
-{
- if (regno < 32)
- return regno;
- if (regno >= mips_regnum (gdbarch)->fp0
- && regno < mips_regnum (gdbarch)->fp0 + 32)
- return regno - mips_regnum (gdbarch)->fp0 + 32;
- else if (regno == mips_regnum (gdbarch)->pc)
- return REGNO_OFFSET + 0;
- else if (regno == mips_regnum (gdbarch)->cause)
- return REGNO_OFFSET + 1;
- else if (regno == mips_regnum (gdbarch)->hi)
- return REGNO_OFFSET + 2;
- else if (regno == mips_regnum (gdbarch)->lo)
- return REGNO_OFFSET + 3;
- else if (regno == mips_regnum (gdbarch)->fp_control_status)
- return REGNO_OFFSET + 4;
- else if (regno == mips_regnum (gdbarch)->fp_implementation_revision)
- return REGNO_OFFSET + 5;
- else
- /* FIXME: Is there a way to get the status register? */
- return 0;
-}
-
-/* Fetch the remote registers. */
-
-static void
-mips_fetch_registers (struct target_ops *ops,
- struct regcache *regcache, int regno)
-{
- struct gdbarch *gdbarch = get_regcache_arch (regcache);
- enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
- ULONGEST val;
- int err;
-
- if (regno == -1)
- {
- for (regno = 0; regno < gdbarch_num_regs (gdbarch); regno++)
- mips_fetch_registers (ops, regcache, regno);
- return;
- }
-
- if (regno == gdbarch_deprecated_fp_regnum (gdbarch)
- || regno == MIPS_ZERO_REGNUM)
- /* gdbarch_deprecated_fp_regnum on the mips is a hack which is just
- supposed to read zero (see also mips-nat.c). */
- val = 0;
- else
- {
- /* If PMON doesn't support this register, don't waste serial
- bandwidth trying to read it. */
- int pmon_reg = mips_map_regno (gdbarch, regno);
-
- if (regno != 0 && pmon_reg == 0)
- val = 0;
- else
- {
- /* Unfortunately the PMON version in the Vr4300 board has been
- compiled without the 64bit register access commands. This
- means we cannot get hold of the full register width. */
- if (mips_monitor == MON_DDB || mips_monitor == MON_ROCKHOPPER)
- val = mips_request ('t', pmon_reg, 0,
- &err, mips_receive_wait, NULL);
- else
- val = mips_request ('r', pmon_reg, 0,
- &err, mips_receive_wait, NULL);
- if (err)
- mips_error (_("Can't read register %d: %s"), regno,
- safe_strerror (errno));
- }
- }
-
- mips_set_register (regno, val);
-}
-
-/* Prepare to store registers. The MIPS protocol can store individual
- registers, so this function doesn't have to do anything. */
-
-static void
-mips_prepare_to_store (struct target_ops *self, struct regcache *regcache)
-{
-}
-
-/* Store remote register(s). */
-
-static void
-mips_store_registers (struct target_ops *ops,
- struct regcache *regcache, int regno)
-{
- struct gdbarch *gdbarch = get_regcache_arch (regcache);
- ULONGEST val;
- int err;
-
- if (regno == -1)
- {
- for (regno = 0; regno < gdbarch_num_regs (gdbarch); regno++)
- mips_store_registers (ops, regcache, regno);
- return;
- }
-
- regcache_cooked_read_unsigned (regcache, regno, &val);
- mips_request (mips_monitor == MON_ROCKHOPPER ? 'T' : 'R',
- mips_map_regno (gdbarch, regno),
- val,
- &err, mips_receive_wait, NULL);
- if (err)
- mips_error (_("Can't write register %d: %s"), regno,
- safe_strerror (errno));
-}
-
-/* Fetch a word from the target board. Return word fetched in location
- addressed by VALP. Return 0 when successful; return positive error
- code when not. */
-
-static int
-mips_fetch_word (CORE_ADDR addr, unsigned int *valp)
-{
- int err;
-
- *valp = mips_request ('d', addr, 0, &err, mips_receive_wait, NULL);
- if (err)
- {
- /* Data space failed; try instruction space. */
- *valp = mips_request ('i', addr, 0, &err,
- mips_receive_wait, NULL);
- }
- return err;
-}
-
-/* Store a word to the target board. Returns errno code or zero for
- success. If OLD_CONTENTS is non-NULL, put the old contents of that
- memory location there. */
-
-/* FIXME! make sure only 32-bit quantities get stored! */
-static int
-mips_store_word (CORE_ADDR addr, unsigned int val, int *old_contents)
-{
- int err;
- unsigned int oldcontents;
-
- oldcontents = mips_request ('D', addr, val, &err,
- mips_receive_wait, NULL);
- if (err)
- {
- /* Data space failed; try instruction space. */
- oldcontents = mips_request ('I', addr, val, &err,
- mips_receive_wait, NULL);
- if (err)
- return errno;
- }
- if (old_contents != NULL)
- *old_contents = oldcontents;
- return 0;
-}
-
-/* Helper for mips_xfer_partial that handles memory transfers.
- Arguments are like target_xfer_partial. Note that the protocol
- gives us the correct value for a longword, since it transfers
- values in ASCII. We want the byte values, so we have to swap the
- longword values. */
-
-static int mask_address_p = 1;
-
-static enum target_xfer_status
-mips_xfer_memory (gdb_byte *readbuf, const gdb_byte *writebuf,
- ULONGEST memaddr, ULONGEST len, ULONGEST *xfered_len)
-{
- enum bfd_endian byte_order = gdbarch_byte_order (target_gdbarch ());
- int i;
- CORE_ADDR addr;
- int count;
- gdb_byte *buffer;
- int status;
-
- /* PMON targets do not cope well with 64 bit addresses. Mask the
- value down to 32 bits. */
- if (mask_address_p)
- memaddr &= (CORE_ADDR) 0xffffffff;
-
- /* Round starting address down to longword boundary. */
- addr = memaddr & ~3;
- /* Round ending address up; get number of longwords that makes. */
- count = (((memaddr + len) - addr) + 3) / 4;
- /* Allocate buffer of that many longwords. */
- buffer = (gdb_byte *) alloca (count * 4);
-
- if (writebuf != NULL)
- {
- /* Fill start and end extra bytes of buffer with existing data. */
- if (addr != memaddr || len < 4)
- {
- unsigned int val;
-
- if (mips_fetch_word (addr, &val))
- return TARGET_XFER_E_IO;
-
- /* Need part of initial word -- fetch it. */
- store_unsigned_integer (&buffer[0], 4, byte_order, val);
- }
-
- if (count > 1)
- {
- unsigned int val;
-
- /* Need part of last word -- fetch it. FIXME: we do this even
- if we don't need it. */
- if (mips_fetch_word (addr + (count - 1) * 4, &val))
- return TARGET_XFER_E_IO;
-
- store_unsigned_integer (&buffer[(count - 1) * 4],
- 4, byte_order, val);
- }
-
- /* Copy data to be written over corresponding part of buffer. */
-
- memcpy ((char *) buffer + (memaddr & 3), writebuf, len);
-
- /* Write the entire buffer. */
-
- for (i = 0; i < count; i++, addr += 4)
- {
- int word;
-
- word = extract_unsigned_integer (&buffer[i * 4], 4, byte_order);
- status = mips_store_word (addr, word, NULL);
- /* Report each kilobyte (we download 32-bit words at a time). */
- if (i % 256 == 255)
- {
- printf_unfiltered ("*");
- gdb_flush (gdb_stdout);
- }
- if (status)
- return TARGET_XFER_E_IO;
- /* FIXME: Do we want a QUIT here? */
- }
- if (count >= 256)
- printf_unfiltered ("\n");
- }
- else
- {
- /* Read all the longwords. */
- for (i = 0; i < count; i++, addr += 4)
- {
- unsigned int val;
-
- if (mips_fetch_word (addr, &val))
- return TARGET_XFER_E_IO;
-
- store_unsigned_integer (&buffer[i * 4], 4, byte_order, val);
- QUIT;
- }
-
- /* Copy appropriate bytes out of the buffer. */
- memcpy (readbuf, buffer + (memaddr & 3), len);
- }
- *xfered_len = len;
- return TARGET_XFER_OK;
-}
-
-/* Target to_xfer_partial implementation. */
-
-static enum target_xfer_status
-mips_xfer_partial (struct target_ops *ops, enum target_object object,
- const char *annex, gdb_byte *readbuf,
- const gdb_byte *writebuf, ULONGEST offset, ULONGEST len,
- ULONGEST *xfered_len)
-{
- switch (object)
- {
- case TARGET_OBJECT_MEMORY:
- return mips_xfer_memory (readbuf, writebuf, offset, len, xfered_len);
-
- default:
- return ops->beneath->to_xfer_partial (ops->beneath, object, annex,
- readbuf, writebuf, offset, len,
- xfered_len);
- }
-}
-
-/* Print info on this target. */
-
-static void
-mips_files_info (struct target_ops *ignore)
-{
- printf_unfiltered ("Debugging a MIPS board over a serial line.\n");
-}
-
-/* Kill the process running on the board. This will actually only
- work if we are doing remote debugging over the console input. I
- think that if IDT/sim had the remote debug interrupt enabled on the
- right port, we could interrupt the process with a break signal. */
-
-static void
-mips_kill (struct target_ops *ops)
-{
- if (!mips_wait_flag)
- {
- target_mourn_inferior ();
- return;
- }
-
- interrupt_count++;
-
- if (interrupt_count >= 2)
- {
- interrupt_count = 0;
-
- target_terminal_ours ();
-
- if (query (_("Interrupted while waiting for the program.\n\
-Give up (and stop debugging it)? ")))
- {
- /* Clean up in such a way that mips_close won't try to talk
- to the board (it almost surely won't work since we
- weren't able to talk to it). */
- mips_wait_flag = 0;
- close_ports ();
-
- printf_unfiltered ("Ending remote MIPS debugging.\n");
- target_mourn_inferior ();
- quit ();
- }
-
- target_terminal_inferior ();
- }
-
- if (remote_debug > 0)
- printf_unfiltered ("Sending break\n");
-
- serial_send_break (mips_desc);
-
- target_mourn_inferior ();
-
-#if 0
- if (mips_is_open)
- {
- char cc;
-
- /* Send a ^C. */
- cc = '\003';
- serial_write (mips_desc, &cc, 1);
- sleep (1);
- target_mourn_inferior ();
- }
-#endif
-}
-
-/* Start running on the target board. */
-
-static void
-mips_create_inferior (struct target_ops *ops, char *execfile,
- char *args, char **env, int from_tty)
-{
- CORE_ADDR entry_pt;
-
- if (args && *args)
- {
- warning (_("\
-Can't pass arguments to remote MIPS board; arguments ignored."));
- /* And don't try to use them on the next "run" command. */
- execute_command ("set args", 0);
- }
-
- if (execfile == 0 || exec_bfd == 0)
- error (_("No executable file specified"));
-
- entry_pt = (CORE_ADDR) bfd_get_start_address (exec_bfd);
-
- init_wait_for_inferior ();
-
- regcache_write_pc (get_current_regcache (), entry_pt);
-}
-
-/* Clean up after a process. The bulk of the work is done in mips_close(),
- which is called when unpushing the target. */
-
-static void
-mips_mourn_inferior (struct target_ops *ops)
-{
- if (current_ops != NULL)
- unpush_target (current_ops);
-}
-\f
-/* We can write a breakpoint and read the shadow contents in one
- operation. */
-
-/* Insert a breakpoint. On targets that don't have built-in
- breakpoint support, we read the contents of the target location and
- stash it, then overwrite it with a breakpoint instruction. ADDR is
- the target location in the target machine. BPT is the breakpoint
- being inserted or removed, which contains memory for saving the
- target contents. */
-
-static int
-mips_insert_breakpoint (struct target_ops *ops, struct gdbarch *gdbarch,
- struct bp_target_info *bp_tgt)
-{
- if (monitor_supports_breakpoints)
- {
- bp_tgt->placed_address = bp_tgt->reqstd_address;
- return mips_set_breakpoint (bp_tgt->placed_address, MIPS_INSN32_SIZE,
- BREAK_FETCH);
- }
- else
- return memory_insert_breakpoint (ops, gdbarch, bp_tgt);
-}
-
-/* Remove a breakpoint. */
-
-static int
-mips_remove_breakpoint (struct target_ops *ops, struct gdbarch *gdbarch,
- struct bp_target_info *bp_tgt)
-{
- if (monitor_supports_breakpoints)
- return mips_clear_breakpoint (bp_tgt->placed_address, MIPS_INSN32_SIZE,
- BREAK_FETCH);
- else
- return memory_remove_breakpoint (ops, gdbarch, bp_tgt);
-}
-
-/* Tell whether this target can support a hardware breakpoint. CNT
- is the number of hardware breakpoints already installed. This
- implements the target_can_use_hardware_watchpoint macro. */
-
-static int
-mips_can_use_watchpoint (struct target_ops *self,
- enum bptype type, int cnt, int othertype)
-{
- return cnt < MAX_LSI_BREAKPOINTS && strcmp (target_shortname, "lsi") == 0;
-}
-
-
-/* Compute a don't care mask for the region bounding ADDR and ADDR + LEN - 1.
- This is used for memory ref breakpoints. */
-
-static unsigned long
-calculate_mask (CORE_ADDR addr, int len)
-{
- unsigned long mask;
- int i;
-
- mask = addr ^ (addr + len - 1);
-
- for (i = 32; i >= 0; i--)
- if (mask == 0)
- break;
- else
- mask >>= 1;
-
- mask = (unsigned long) 0xffffffff >> i;
-
- return mask;
-}
-
-
-/* Set a data watchpoint. ADDR and LEN should be obvious. TYPE is 0
- for a write watchpoint, 1 for a read watchpoint, or 2 for a read/write
- watchpoint. */
-
-static int
-mips_insert_watchpoint (struct target_ops *self,
- CORE_ADDR addr, int len, enum target_hw_bp_type type,
- struct expression *cond)
-{
- /* These enum types are compatible by design. */
- enum break_type btype = (enum break_type) type;
-
- if (mips_set_breakpoint (addr, len, btype))
- return -1;
-
- return 0;
-}
-
-/* Remove a watchpoint. */
-
-static int
-mips_remove_watchpoint (struct target_ops *self,
- CORE_ADDR addr, int len, enum target_hw_bp_type type,
- struct expression *cond)
-{
- /* These enum types are compatible by design. */
- enum break_type btype = (enum break_type) type;
-
- if (mips_clear_breakpoint (addr, len, btype))
- return -1;
-
- return 0;
-}
-
-/* Test to see if a watchpoint has been hit. Return 1 if so; return 0,
- if not. */
-
-static int
-mips_stopped_by_watchpoint (struct target_ops *ops)
-{
- return hit_watchpoint;
-}
-
-
-/* Insert a breakpoint. */
-
-static int
-mips_set_breakpoint (CORE_ADDR addr, int len, enum break_type type)
-{
- return mips_common_breakpoint (1, addr, len, type);
-}
-
-
-/* Clear a breakpoint. */
-
-static int
-mips_clear_breakpoint (CORE_ADDR addr, int len, enum break_type type)
-{
- return mips_common_breakpoint (0, addr, len, type);
-}
-
-
-/* Check the error code from the return packet for an LSI breakpoint
- command. If there's no error, just return 0. If it's a warning,
- print the warning text and return 0. If it's an error, print
- the error text and return 1. <ADDR> is the address of the breakpoint
- that was being set. <RERRFLG> is the error code returned by PMON.
- This is a helper function for mips_common_breakpoint. */
-
-static int
-mips_check_lsi_error (CORE_ADDR addr, int rerrflg)
-{
- struct lsi_error *err;
- const char *saddr = paddress (target_gdbarch (), addr);
-
- if (rerrflg == 0) /* no error */
- return 0;
-
- /* Warnings can be ORed together, so check them all. */
- if (rerrflg & W_WARN)
- {
- if (monitor_warnings)
- {
- int found = 0;
-
- for (err = lsi_warning_table; err->code != 0; err++)
- {
- if ((err->code & rerrflg) == err->code)
- {
- found = 1;
- fprintf_unfiltered (gdb_stderr, "\
-mips_common_breakpoint (%s): Warning: %s\n",
- saddr,
- err->string);
- }
- }
- if (!found)
- fprintf_unfiltered (gdb_stderr, "\
-mips_common_breakpoint (%s): Unknown warning: 0x%x\n",
- saddr,
- rerrflg);
- }
- return 0;
- }
-
- /* Errors are unique, i.e. can't be ORed together. */
- for (err = lsi_error_table; err->code != 0; err++)
- {
- if ((err->code & rerrflg) == err->code)
- {
- fprintf_unfiltered (gdb_stderr, "\
-mips_common_breakpoint (%s): Error: %s\n",
- saddr,
- err->string);
- return 1;
- }
- }
- fprintf_unfiltered (gdb_stderr, "\
-mips_common_breakpoint (%s): Unknown error: 0x%x\n",
- saddr,
- rerrflg);
- return 1;
-}
-
-
-/* This routine sends a breakpoint command to the remote target.
-
- <SET> is 1 if setting a breakpoint, or 0 if clearing a breakpoint.
- <ADDR> is the address of the breakpoint.
- <LEN> the length of the region to break on.
- <TYPE> is the type of breakpoint:
- 0 = write (BREAK_WRITE)
- 1 = read (BREAK_READ)
- 2 = read/write (BREAK_ACCESS)
- 3 = instruction fetch (BREAK_FETCH)
-
- Return 0 if successful; otherwise 1. */
-
-static int
-mips_common_breakpoint (int set, CORE_ADDR addr, int len, enum break_type type)
-{
- int addr_size = gdbarch_addr_bit (target_gdbarch ()) / 8;
- char buf[DATA_MAXLEN + 1];
- char cmd, rcmd;
- int rpid, rerrflg, rresponse, rlen;
- int nfields;
-
- addr = gdbarch_addr_bits_remove (target_gdbarch (), addr);
-
- if (mips_monitor == MON_LSI)
- {
- if (set == 0) /* clear breakpoint */
- {
- /* The LSI PMON "clear breakpoint" has this form:
- <pid> 'b' <bptn> 0x0
- reply:
- <pid> 'b' 0x0 <code>
-
- <bptn> is a breakpoint number returned by an earlier 'B' command.
- Possible return codes: OK, E_BPT. */
-
- int i;
-
- /* Search for the breakpoint in the table. */
- for (i = 0; i < MAX_LSI_BREAKPOINTS; i++)
- if (lsi_breakpoints[i].type == type
- && lsi_breakpoints[i].addr == addr
- && lsi_breakpoints[i].len == len)
- break;
-
- /* Clear the table entry and tell PMON to clear the breakpoint. */
- if (i == MAX_LSI_BREAKPOINTS)
- {
- warning (_("\
-mips_common_breakpoint: Attempt to clear bogus breakpoint at %s"),
- paddress (target_gdbarch (), addr));
- return 1;
- }
-
- lsi_breakpoints[i].type = BREAK_UNUSED;
- sprintf (buf, "0x0 b 0x%x 0x0", i);
- mips_send_packet (buf, 1);
-
- rlen = mips_receive_packet (buf, 1, mips_receive_wait);
- buf[rlen] = '\0';
-
- nfields = sscanf (buf, "0x%x b 0x0 0x%x", &rpid, &rerrflg);
- if (nfields != 2)
- mips_error (_("mips_common_breakpoint: "
- "Bad response from remote board: %s"),
- buf);
-
- return (mips_check_lsi_error (addr, rerrflg));
- }
- else
- /* set a breakpoint */
- {
- /* The LSI PMON "set breakpoint" command has this form:
- <pid> 'B' <addr> 0x0
- reply:
- <pid> 'B' <bptn> <code>
-
- The "set data breakpoint" command has this form:
-
- <pid> 'A' <addr1> <type> [<addr2> [<value>]]
-
- where: type= "0x1" = read
- "0x2" = write
- "0x3" = access (read or write)
-
- The reply returns two values:
- bptn - a breakpoint number, which is a small integer with
- possible values of zero through 255.
- code - an error return code, a value of zero indicates a
- succesful completion, other values indicate various
- errors and warnings.
-
- Possible return codes: OK, W_QAL, E_QAL, E_OUT, E_NON. */
-
- if (type == BREAK_FETCH) /* instruction breakpoint */
- {
- cmd = 'B';
- sprintf (buf, "0x0 B 0x%s 0x0", phex_nz (addr, addr_size));
- }
- else
- /* watchpoint */
- {
- cmd = 'A';
- sprintf (buf, "0x0 A 0x%s 0x%x 0x%s",
- phex_nz (addr, addr_size),
- type == BREAK_READ ? 1 : (type == BREAK_WRITE ? 2 : 3),
- phex_nz (addr + len - 1, addr_size));
- }
- mips_send_packet (buf, 1);
-
- rlen = mips_receive_packet (buf, 1, mips_receive_wait);
- buf[rlen] = '\0';
-
- nfields = sscanf (buf, "0x%x %c 0x%x 0x%x",
- &rpid, &rcmd, &rresponse, &rerrflg);
- if (nfields != 4 || rcmd != cmd || rresponse > 255)
- mips_error (_("mips_common_breakpoint: "
- "Bad response from remote board: %s"),
- buf);
-
- if (rerrflg != 0)
- if (mips_check_lsi_error (addr, rerrflg))
- return 1;
-
- /* rresponse contains PMON's breakpoint number. Record the
- information for this breakpoint so we can clear it later. */
- lsi_breakpoints[rresponse].type = type;
- lsi_breakpoints[rresponse].addr = addr;
- lsi_breakpoints[rresponse].len = len;
-
- return 0;
- }
- }
- else
- {
- /* On non-LSI targets, the breakpoint command has this form:
- 0x0 <CMD> <ADDR> <MASK> <FLAGS>
- <MASK> is a don't care mask for addresses.
- <FLAGS> is any combination of `r', `w', or `f' for
- read/write/fetch. */
-
- unsigned long mask;
-
- mask = calculate_mask (addr, len);
- addr &= ~mask;
-
- if (set) /* set a breakpoint */
- {
- char *flags;
-
- switch (type)
- {
- case BREAK_WRITE: /* write */
- flags = "w";
- break;
- case BREAK_READ: /* read */
- flags = "r";
- break;
- case BREAK_ACCESS: /* read/write */
- flags = "rw";
- break;
- case BREAK_FETCH: /* fetch */
- flags = "f";
- break;
- default:
- internal_error (__FILE__, __LINE__,
- _("failed internal consistency check"));
- }
-
- cmd = 'B';
- sprintf (buf, "0x0 B 0x%s 0x%s %s", phex_nz (addr, addr_size),
- phex_nz (mask, addr_size), flags);
- }
- else
- {
- cmd = 'b';
- sprintf (buf, "0x0 b 0x%s", phex_nz (addr, addr_size));
- }
-
- mips_send_packet (buf, 1);
-
- rlen = mips_receive_packet (buf, 1, mips_receive_wait);
- buf[rlen] = '\0';
-
- nfields = sscanf (buf, "0x%x %c 0x%x 0x%x",
- &rpid, &rcmd, &rerrflg, &rresponse);
-
- if (nfields != 4 || rcmd != cmd)
- mips_error (_("mips_common_breakpoint: "
- "Bad response from remote board: %s"),
- buf);
-
- if (rerrflg != 0)
- {
- /* Ddb returns "0x0 b 0x16 0x0\000", whereas
- Cogent returns "0x0 b 0xffffffff 0x16\000": */
- if (mips_monitor == MON_DDB)
- rresponse = rerrflg;
- if (rresponse != 22) /* invalid argument */
- fprintf_unfiltered (gdb_stderr, "\
-mips_common_breakpoint (%s): Got error: 0x%x\n",
- paddress (target_gdbarch (), addr), rresponse);
- return 1;
- }
- }
- return 0;
-}
-\f
-/* Send one S record as specified by SREC of length LEN, starting
- at ADDR. Note, however, that ADDR is not used except to provide
- a useful message to the user in the event that a NACK is received
- from the board. */
-
-static void
-send_srec (char *srec, int len, CORE_ADDR addr)
-{
- while (1)
- {
- int ch;
-
- serial_write (mips_desc, srec, len);
-
- ch = mips_readchar (remote_timeout);
-
- switch (ch)
- {
- case SERIAL_TIMEOUT:
- error (_("Timeout during download."));
- break;
- case 0x6: /* ACK */
- return;
- case 0x15: /* NACK */
- fprintf_unfiltered (gdb_stderr,
- "Download got a NACK at byte %s! Retrying.\n",
- paddress (target_gdbarch (), addr));
- continue;
- default:
- error (_("Download got unexpected ack char: 0x%x, retrying."),
- ch);
- }
- }
-}
-
-/* Download a binary file by converting it to S records. */
-
-static void
-mips_load_srec (const char *args)
-{
- bfd *abfd;
- asection *s;
- char srec[1024];
- bfd_byte *buffer;
- unsigned int i;
- unsigned int srec_frame = 200;
- int reclen;
- struct cleanup *cleanup;
- static int hashmark = 1;
-
- buffer = (bfd_byte *) alloca (srec_frame * 2 + 256);
-
- abfd = gdb_bfd_open (args, NULL, -1);
- if (!abfd)
- {
- printf_filtered ("Unable to open file %s\n", args);
- return;
- }
-
- cleanup = make_cleanup_bfd_unref (abfd);
- if (bfd_check_format (abfd, bfd_object) == 0)
- {
- printf_filtered ("File is not an object file\n");
- do_cleanups (cleanup);
- return;
- }
-
-/* This actually causes a download in the IDT binary format: */
- mips_send_command (LOAD_CMD, 0);
-
- for (s = abfd->sections; s; s = s->next)
- {
- if (s->flags & SEC_LOAD)
- {
- unsigned int numbytes;
-
- /* FIXME! vma too small????? */
- printf_filtered ("%s\t: 0x%4lx .. 0x%4lx ", s->name,
- (long) s->vma,
- (long) (s->vma + bfd_get_section_size (s)));
- gdb_flush (gdb_stdout);
-
- for (i = 0; i < bfd_get_section_size (s); i += numbytes)
- {
- numbytes = min (srec_frame, bfd_get_section_size (s) - i);
-
- bfd_get_section_contents (abfd, s, buffer, i, numbytes);
-
- reclen = mips_make_srec (srec, '3', s->vma + i,
- buffer, numbytes);
- send_srec (srec, reclen, s->vma + i);
-
- if (deprecated_ui_load_progress_hook)
- deprecated_ui_load_progress_hook (s->name, i);
-
- if (hashmark)
- {
- putchar_unfiltered ('#');
- gdb_flush (gdb_stdout);
- }
-
- } /* Per-packet (or S-record) loop */
-
- putchar_unfiltered ('\n');
- } /* Loadable sections */
- }
- if (hashmark)
- putchar_unfiltered ('\n');
-
- /* Write a type 7 terminator record. no data for a type 7, and there
- is no data, so len is 0. */
-
- reclen = mips_make_srec (srec, '7', abfd->start_address, NULL, 0);
-
- send_srec (srec, reclen, abfd->start_address);
-
- serial_flush_input (mips_desc);
- do_cleanups (cleanup);
-}
-
-/*
- * mips_make_srec -- make an srecord. This writes each line, one at a
- * time, each with it's own header and trailer line.
- * An srecord looks like this:
- *
- * byte count-+ address
- * start ---+ | | data +- checksum
- * | | | |
- * S01000006F6B692D746573742E73726563E4
- * S315000448600000000000000000FC00005900000000E9
- * S31A0004000023C1400037DE00F023604000377B009020825000348D
- * S30B0004485A0000000000004E
- * S70500040000F6
- *
- * S<type><length><address><data><checksum>
- *
- * Where
- * - length
- * is the number of bytes following upto the checksum. Note that
- * this is not the number of chars following, since it takes two
- * chars to represent a byte.
- * - type
- * is one of:
- * 0) header record
- * 1) two byte address data record
- * 2) three byte address data record
- * 3) four byte address data record
- * 7) four byte address termination record
- * 8) three byte address termination record
- * 9) two byte address termination record
- *
- * - address
- * is the start address of the data following, or in the case of
- * a termination record, the start address of the image
- * - data
- * is the data.
- * - checksum
- * is the sum of all the raw byte data in the record, from the length
- * upwards, modulo 256 and subtracted from 255.
- *
- * This routine returns the length of the S-record.
- *
- */
-
-static int
-mips_make_srec (char *buf, int type, CORE_ADDR memaddr, unsigned char *myaddr,
- int len)
-{
- unsigned char checksum;
- int i;
-
- /* Create the header for the srec. addr_size is the number of bytes
- in the address, and 1 is the number of bytes in the count. */
-
- /* FIXME!! bigger buf required for 64-bit! */
- buf[0] = 'S';
- buf[1] = type;
- buf[2] = len + 4 + 1; /* len + 4 byte address + 1 byte checksum */
- /* This assumes S3 style downloads (4byte addresses). There should
- probably be a check, or the code changed to make it more
- explicit. */
- buf[3] = memaddr >> 24;
- buf[4] = memaddr >> 16;
- buf[5] = memaddr >> 8;
- buf[6] = memaddr;
- memcpy (&buf[7], myaddr, len);
-
- /* Note that the checksum is calculated on the raw data, not the
- hexified data. It includes the length, address and the data
- portions of the packet. */
- checksum = 0;
- buf += 2; /* Point at length byte. */
- for (i = 0; i < len + 4 + 1; i++)
- checksum += *buf++;
-
- *buf = ~checksum;
-
- return len + 8;
-}
-
-/* The following manifest controls whether we enable the simple flow
- control support provided by the monitor. If enabled the code will
- wait for an affirmative ACK between transmitting packets. */
-#define DOETXACK (1)
-
-/* The PMON fast-download uses an encoded packet format constructed of
- 3byte data packets (encoded as 4 printable ASCII characters), and
- escape sequences (preceded by a '/'):
-
- 'K' clear checksum
- 'C' compare checksum (12bit value, not included in checksum calculation)
- 'S' define symbol name (for addr) terminated with ","
- and padded to 4char boundary
- 'Z' zero fill multiple of 3bytes
- 'B' byte (12bit encoded value, of 8bit data)
- 'A' address (36bit encoded value)
- 'E' define entry as original address, and exit load
-
- The packets are processed in 4 character chunks, so the escape
- sequences that do not have any data (or variable length data)
- should be padded to a 4 character boundary. The decoder will give
- an error if the complete message block size is not a multiple of
- 4bytes (size of record).
-
- The encoding of numbers is done in 6bit fields. The 6bit value is
- used to index into this string to get the specific character
- encoding for the value: */
-static char encoding[] =
- "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789,.";
-
-/* Convert the number of bits required into an encoded number, 6bits
- at a time (range 0..63). Keep a checksum if required (passed
- pointer non-NULL). The function returns the number of encoded
- characters written into the buffer. */
-
-static int
-pmon_makeb64 (unsigned long v, char *p, int n, unsigned int *chksum)
-{
- int count = (n / 6);
-
- if ((n % 12) != 0)
- {
- fprintf_unfiltered (gdb_stderr,
- "Fast encoding bitcount must be a "
- "multiple of 12bits: %dbit%s\n",
- n, (n == 1) ? "" : "s");
- return (0);
- }
- if (n > 36)
- {
- fprintf_unfiltered (gdb_stderr,
- "Fast encoding cannot process more "
- "than 36bits at the moment: %dbits\n", n);
- return (0);
- }
-
- /* Deal with the checksum: */
- if (chksum != NULL)
- {
- switch (n)
- {
- case 36:
- *chksum += ((v >> 24) & 0xFFF);
- case 24:
- *chksum += ((v >> 12) & 0xFFF);
- case 12:
- *chksum += ((v >> 0) & 0xFFF);
- }
- }
-
- do
- {
- n -= 6;
- *p++ = encoding[(v >> n) & 0x3F];
- }
- while (n > 0);
-
- return (count);
-}
-
-/* Shorthand function (that could be in-lined) to output the zero-fill
- escape sequence into the data stream. */
-
-static int
-pmon_zeroset (int recsize, char **buff,
- unsigned int *amount, unsigned int *chksum)
-{
- int count;
-
- sprintf (*buff, "/Z");
- count = pmon_makeb64 (*amount, (*buff + 2), 12, chksum);
- *buff += (count + 2);
- *amount = 0;
- return (recsize + count + 2);
-}
-
-/* Add the checksum specified by *VALUE to end of the record under
- construction. *BUF specifies the location at which to begin
- writing characters comprising the checksum information. RECSIZE
- specifies the size of the record constructed thus far. (A trailing
- NUL character may be present in the buffer holding the record, but
- the record size does not include this character.)
-
- Return the total size of the record after adding the checksum escape,
- the checksum itself, and the trailing newline.
-
- The checksum specified by *VALUE is zeroed out prior to returning.
- Additionally, *BUF is updated to refer to the location just beyond
- the record elements added by this call. */
-
-static int
-pmon_checkset (int recsize, char **buff, unsigned int *value)
-{
- int count;
-
- /* Add the checksum (without updating the value): */
- sprintf (*buff, "/C");
- count = pmon_makeb64 (*value, (*buff + 2), 12, NULL);
- *buff += (count + 2);
- sprintf (*buff, "\n");
- *buff += 2; /* Include zero terminator. */
- /* Forcing a checksum validation clears the sum: */
- *value = 0;
- return (recsize + count + 3);
-}
-
-/* Amount of padding we leave after at the end of the output buffer,
- for the checksum and line termination characters: */
-#define CHECKSIZE (4 + 4 + 4 + 2)
-/* zero-fill, checksum, transfer end and line termination space. */
-
-/* The amount of binary data loaded from the object file in a single
- operation: */
-#define BINCHUNK (1024)
-
-/* Maximum line of data accepted by the monitor: */
-#define MAXRECSIZE (550)
-/* NOTE: This constant depends on the monitor being used. This value
- is for PMON 5.x on the Cogent Vr4300 board. */
-
-/* Create a FastLoad format record.
-
- *OUTBUF is the buffer into which a FastLoad formatted record is
- written. On return, the pointer position represented by *OUTBUF
- is updated to point at the end of the data, i.e. the next position
- in the buffer that may be written. No attempt is made to NUL-
- terminate this portion of the record written to the buffer.
-
- INBUF contains the binary input data from which the FastLoad
- formatted record will be built. *INPTR is an index into this
- buffer. *INPTR is updated as the input is consumed. Thus, on
- return, the caller has access to the position of the next input
- byte yet to be processed. INAMOUNT is the size, in bytes, of the
- input data.
-
- *RECSIZE will be written with the size of the record written to the
- output buffer prior to returning. This size does not include a
- NUL-termination byte as none is written to the output buffer.
-
- *CSUM is the output buffer checksum. It is updated as data is
- written to the output buffer.
-
- *ZEROFILL is the current number of 3-byte zero sequences that have
- been encountered. It is both an input and an output to this
- function. */
-
-static void
-pmon_make_fastrec (char **outbuf, unsigned char *inbuf, int *inptr,
- int inamount, int *recsize, unsigned int *csum,
- unsigned int *zerofill)
-{
- int count = 0;
- char *p = *outbuf;
-
- /* This is a simple check to ensure that our data will fit within
- the maximum allowable record size. Each record output is 4bytes
- in length. We must allow space for a pending zero fill command,
- the record, and a checksum record. */
- while ((*recsize < (MAXRECSIZE - CHECKSIZE)) && ((inamount - *inptr) > 0))
- {
- /* Process the binary data: */
- if ((inamount - *inptr) < 3)
- {
- if (*zerofill != 0)
- *recsize = pmon_zeroset (*recsize, &p, zerofill, csum);
- sprintf (p, "/B");
- count = pmon_makeb64 (inbuf[*inptr], &p[2], 12, csum);
- p += (2 + count);
- *recsize += (2 + count);
- (*inptr)++;
- }
- else
- {
- unsigned int value = ((inbuf[*inptr + 0] << 16)
- | (inbuf[*inptr + 1] << 8)
- | (inbuf[*inptr + 2]));
-
- /* Simple check for zero data. TODO: A better check would be
- to check the last, and then the middle byte for being zero
- (if the first byte is not). We could then check for
- following runs of zeros, and if above a certain size it is
- worth the 4 or 8 character hit of the byte insertions used
- to pad to the start of the zeroes. NOTE: This also depends
- on the alignment at the end of the zero run. */
- if (value == 0x00000000)
- {
- (*zerofill)++;
- if (*zerofill == 0xFFF) /* 12bit counter */
- *recsize = pmon_zeroset (*recsize, &p, zerofill, csum);
- }
- else
- {
- if (*zerofill != 0)
- *recsize = pmon_zeroset (*recsize, &p, zerofill, csum);
- count = pmon_makeb64 (value, p, 24, csum);
- p += count;
- *recsize += count;
- }
- *inptr += 3;
- }
- }
-
- *outbuf = p;
- return;
-}
-
-/* Attempt to read an ACK. If an ACK is not read in a timely manner,
- output the message specified by MESG. Return -1 for failure, 0
- for success. */
-
-static int
-pmon_check_ack (char *mesg)
-{
-#if defined(DOETXACK)
- int c;
-
- if (!tftp_in_use)
- {
- c = serial_readchar (udp_in_use ? udp_desc : mips_desc,
- remote_timeout);
- if ((c == SERIAL_TIMEOUT) || (c != 0x06))
- {
- fprintf_unfiltered (gdb_stderr,
- "Failed to receive valid ACK for %s\n", mesg);
- return (-1); /* Terminate the download. */
- }
- }
-#endif /* DOETXACK */
- return (0);
-}
-
-/* pmon_download - Send a sequence of characters to the PMON download port,
- which is either a serial port or a UDP socket. */
-
-static void
-pmon_start_download (void)
-{
- if (tftp_in_use)
- {
- /* Create the temporary download file. */
- if ((tftp_file = fopen (tftp_localname, "w")) == NULL)
- perror_with_name (tftp_localname);
- }
- else
- {
- mips_send_command (udp_in_use ? LOAD_CMD_UDP : LOAD_CMD, 0);
- mips_expect ("Downloading from ");
- mips_expect (udp_in_use ? "udp" : "tty0");
- mips_expect (", ^C to abort\r\n");
- }
-}
-
-/* Look for the string specified by STRING sent from the target board
- during a download operation. If the string in question is not
- seen, output an error message, remove the temporary file, if
- appropriate, and return 0. Otherwise, return 1 to indicate
- success. */
-
-static int
-mips_expect_download (char *string)
-{
- if (!mips_expect (string))
- {
- fprintf_unfiltered (gdb_stderr, "Load did not complete successfully.\n");
- if (tftp_in_use)
- remove (tftp_localname); /* Remove temporary file. */
- return 0;
- }
- else
- return 1;
-}
-
-/* Look for messages from the target board associated with the entry
- address.
-
- NOTE: This function doesn't indicate success or failure, so we
- have no way to determine whether or not the output from the board
- was correctly seen. However, given that other items are checked
- after this, it seems unlikely that those checks will pass if this
- check doesn't first (silently) pass. */
-
-static void
-pmon_check_entry_address (char *entry_address, int final)
-{
- char hexnumber[9]; /* Includes '\0' space. */
-
- mips_expect_timeout (entry_address, tftp_in_use ? 15 : remote_timeout);
- sprintf (hexnumber, "%x", final);
- mips_expect (hexnumber);
- mips_expect ("\r\n");
-}
-
-/* Look for messages from the target board showing the total number of
- bytes downloaded to the board. Output 1 for success if the tail
- end of the message was read correctly, 0 otherwise. */
-
-static int
-pmon_check_total (int bintotal)
-{
- char hexnumber[9]; /* Includes '\0' space. */
-
- mips_expect ("\r\ntotal = 0x");
- sprintf (hexnumber, "%x", bintotal);
- mips_expect (hexnumber);
- return mips_expect_download (" bytes\r\n");
-}
-
-/* Look for the termination messages associated with the end of
- a download to the board.
-
- Also, when `tftp_in_use' is set, issue the load command to the
- board causing the file to be transferred. (This is done prior
- to looking for the above mentioned termination messages.) */
-
-static void
-pmon_end_download (int final, int bintotal)
-{
- char hexnumber[9]; /* Includes '\0' space. */
-
- if (tftp_in_use)
- {
- static char *load_cmd_prefix = "load -b -s ";
- char *cmd;
- struct stat stbuf;
-
- /* Close off the temporary file containing the load data. */
- fclose (tftp_file);
- tftp_file = NULL;
-
- /* Make the temporary file readable by the world. */
- if (stat (tftp_localname, &stbuf) == 0)
- chmod (tftp_localname, stbuf.st_mode | S_IROTH);
-
- /* Must reinitialize the board to prevent PMON from crashing. */
- if (mips_monitor != MON_ROCKHOPPER)
- mips_send_command ("initEther\r", -1);
-
- /* Send the load command. */
- cmd = (char *) xmalloc (strlen (load_cmd_prefix)
- + strlen (tftp_name) + 2);
- strcpy (cmd, load_cmd_prefix);
- strcat (cmd, tftp_name);
- strcat (cmd, "\r");
- mips_send_command (cmd, 0);
- xfree (cmd);
- if (!mips_expect_download ("Downloading from "))
- return;
- if (!mips_expect_download (tftp_name))
- return;
- if (!mips_expect_download (", ^C to abort\r\n"))
- return;
- }
-
- /* Wait for the stuff that PMON prints after the load has completed.
- The timeout value for use in the tftp case (15 seconds) was picked
- arbitrarily but might be too small for really large downloads. FIXME. */
- switch (mips_monitor)
- {
- case MON_LSI:
- pmon_check_ack ("termination");
- pmon_check_entry_address ("Entry address is ", final);
- if (!pmon_check_total (bintotal))
- return;
- break;
- case MON_ROCKHOPPER:
- if (!pmon_check_total (bintotal))
- return;
- pmon_check_entry_address ("Entry Address = ", final);
- break;
- default:
- pmon_check_entry_address ("Entry Address = ", final);
- pmon_check_ack ("termination");
- if (!pmon_check_total (bintotal))
- return;
- break;
- }
-
- if (tftp_in_use)
- remove (tftp_localname); /* Remove temporary file. */
-}
-
-/* Write the buffer specified by BUFFER of length LENGTH to either
- the board or the temporary file that'll eventually be transferred
- to the board. */
-
-static void
-pmon_download (char *buffer, int length)
-{
- if (tftp_in_use)
- {
- size_t written;
-
- written = fwrite (buffer, 1, length, tftp_file);
- if (written < length)
- perror_with_name (tftp_localname);
- }
- else
- serial_write (udp_in_use ? udp_desc : mips_desc, buffer, length);
-}
-
-/* Open object or executable file, FILE, and send it to the board
- using the FastLoad format. */
-
-static void
-pmon_load_fast (const char *file)
-{
- bfd *abfd;
- asection *s;
- unsigned char *binbuf;
- char *buffer;
- int reclen;
- unsigned int csum = 0;
- int hashmark = !tftp_in_use;
- int bintotal = 0;
- int final = 0;
- int finished = 0;
- struct cleanup *cleanup;
-
- buffer = (char *) xmalloc (MAXRECSIZE + 1);
- binbuf = (unsigned char *) xmalloc (BINCHUNK);
-
- abfd = gdb_bfd_open (file, NULL, -1);
- if (!abfd)
- {
- printf_filtered ("Unable to open file %s\n", file);
- return;
- }
- cleanup = make_cleanup_bfd_unref (abfd);
-
- if (bfd_check_format (abfd, bfd_object) == 0)
- {
- printf_filtered ("File is not an object file\n");
- do_cleanups (cleanup);
- return;
- }
-
- /* Setup the required download state: */
- mips_send_command ("set dlproto etxack\r", -1);
- mips_send_command ("set dlecho off\r", -1);
- /* NOTE: We get a "cannot set variable" message if the variable is
- already defined to have the argument we give. The code doesn't
- care, since it just scans to the next prompt anyway. */
- /* Start the download: */
- pmon_start_download ();
-
- /* Zero the checksum. */
- sprintf (buffer, "/Kxx\n");
- reclen = strlen (buffer);
- pmon_download (buffer, reclen);
- finished = pmon_check_ack ("/Kxx");
-
- for (s = abfd->sections; s && !finished; s = s->next)
- if (s->flags & SEC_LOAD) /* Only deal with loadable sections. */
- {
- bintotal += bfd_get_section_size (s);
- final = (s->vma + bfd_get_section_size (s));
-
- printf_filtered ("%s\t: 0x%4x .. 0x%4x ", s->name,
- (unsigned int) s->vma,
- (unsigned int) (s->vma + bfd_get_section_size (s)));
- gdb_flush (gdb_stdout);
-
- /* Output the starting address. */
- sprintf (buffer, "/A");
- reclen = pmon_makeb64 (s->vma, &buffer[2], 36, &csum);
- buffer[2 + reclen] = '\n';
- buffer[3 + reclen] = '\0';
- reclen += 3; /* For the initial escape code and carriage return. */
- pmon_download (buffer, reclen);
- finished = pmon_check_ack ("/A");
-
- if (!finished)
- {
- unsigned int binamount;
- unsigned int zerofill = 0;
- char *bp = buffer;
- unsigned int i;
-
- reclen = 0;
-
- for (i = 0;
- i < bfd_get_section_size (s) && !finished;
- i += binamount)
- {
- int binptr = 0;
-
- binamount = min (BINCHUNK, bfd_get_section_size (s) - i);
-
- bfd_get_section_contents (abfd, s, binbuf, i, binamount);
-
- /* This keeps a rolling checksum, until we decide to output
- the line: */
- for (; ((binamount - binptr) > 0);)
- {
- pmon_make_fastrec (&bp, binbuf, &binptr, binamount,
- &reclen, &csum, &zerofill);
- if (reclen >= (MAXRECSIZE - CHECKSIZE))
- {
- reclen = pmon_checkset (reclen, &bp, &csum);
- pmon_download (buffer, reclen);
- finished = pmon_check_ack ("data record");
- if (finished)
- {
- zerofill = 0; /* Do not transmit pending
- zerofills. */
- break;
- }
-
- if (deprecated_ui_load_progress_hook)
- deprecated_ui_load_progress_hook (s->name, i);
-
- if (hashmark)
- {
- putchar_unfiltered ('#');
- gdb_flush (gdb_stdout);
- }
-
- bp = buffer;
- reclen = 0; /* buffer processed */
- }
- }
- }
-
- /* Ensure no out-standing zerofill requests: */
- if (zerofill != 0)
- reclen = pmon_zeroset (reclen, &bp, &zerofill, &csum);
-
- /* and then flush the line: */
- if (reclen > 0)
- {
- reclen = pmon_checkset (reclen, &bp, &csum);
- /* Currently pmon_checkset outputs the line terminator by
- default, so we write out the buffer so far: */
- pmon_download (buffer, reclen);
- finished = pmon_check_ack ("record remnant");
- }
- }
-
- putchar_unfiltered ('\n');
- }
-
- /* Terminate the transfer. We know that we have an empty output
- buffer at this point. */
- sprintf (buffer, "/E/E\n"); /* Include dummy padding characters. */
- reclen = strlen (buffer);
- pmon_download (buffer, reclen);
-
- if (finished)
- { /* Ignore the termination message: */
- serial_flush_input (udp_in_use ? udp_desc : mips_desc);
- }
- else
- { /* Deal with termination message: */
- pmon_end_download (final, bintotal);
- }
-
- do_cleanups (cleanup);
- return;
-}
-
-/* mips_load -- download a file. */
-
-static void
-mips_load (struct target_ops *self, const char *file, int from_tty)
-{
- struct regcache *regcache;
-
- /* Get the board out of remote debugging mode. */
- if (mips_exit_debug ())
- error (_("mips_load: Couldn't get into monitor mode."));
-
- if (mips_monitor != MON_IDT)
- pmon_load_fast (file);
- else
- mips_load_srec (file);
-
- mips_initialize ();
-
- /* Finally, make the PC point at the start address. */
- regcache = get_current_regcache ();
- if (mips_monitor != MON_IDT)
- {
- /* Work around problem where PMON monitor updates the PC after a load
- to a different value than GDB thinks it has. The following ensures
- that the regcache_write_pc() WILL update the PC value: */
- regcache_invalidate (regcache,
- mips_regnum (get_regcache_arch (regcache))->pc);
- }
- if (exec_bfd)
- regcache_write_pc (regcache, bfd_get_start_address (exec_bfd));
-}
-
-/* Check to see if a thread is still alive. */
-
-static int
-mips_thread_alive (struct target_ops *ops, ptid_t ptid)
-{
- if (ptid_equal (ptid, remote_mips_ptid))
- /* The monitor's task is always alive. */
- return 1;
-
- return 0;
-}
-
-/* Convert a thread ID to a string. Returns the string in a static
- buffer. */
-
-static char *
-mips_pid_to_str (struct target_ops *ops, ptid_t ptid)
-{
- static char buf[64];
-
- if (ptid_equal (ptid, remote_mips_ptid))
- {
- xsnprintf (buf, sizeof buf, "Thread <main>");
- return buf;
- }
-
- return normal_pid_to_str (ptid);
-}
-
-/* Pass the command argument as a packet to PMON verbatim. */
-
-static void
-pmon_command (char *args, int from_tty)
-{
- char buf[DATA_MAXLEN + 1];
- int rlen;
-
- sprintf (buf, "0x0 %s", args);
- mips_send_packet (buf, 1);
- printf_filtered ("Send packet: %s\n", buf);
-
- rlen = mips_receive_packet (buf, 1, mips_receive_wait);
- buf[rlen] = '\0';
- printf_filtered ("Received packet: %s\n", buf);
-}
-\f
-/* -Wmissing-prototypes */
-extern initialize_file_ftype _initialize_remote_mips;
-
-/* Initialize mips_ops, lsi_ops, ddb_ops, pmon_ops, and rockhopper_ops.
- Create target specific commands and perform other initializations
- specific to this file. */
-
-void
-_initialize_remote_mips (void)
-{
- /* Initialize the fields in mips_ops that are common to all four targets. */
- mips_ops.to_longname = "Remote MIPS debugging over serial line";
- mips_ops.to_close = mips_close;
- mips_ops.to_detach = mips_detach;
- mips_ops.to_resume = mips_resume;
- mips_ops.to_fetch_registers = mips_fetch_registers;
- mips_ops.to_store_registers = mips_store_registers;
- mips_ops.to_prepare_to_store = mips_prepare_to_store;
- mips_ops.to_xfer_partial = mips_xfer_partial;
- mips_ops.to_files_info = mips_files_info;
- mips_ops.to_insert_breakpoint = mips_insert_breakpoint;
- mips_ops.to_remove_breakpoint = mips_remove_breakpoint;
- mips_ops.to_insert_watchpoint = mips_insert_watchpoint;
- mips_ops.to_remove_watchpoint = mips_remove_watchpoint;
- mips_ops.to_stopped_by_watchpoint = mips_stopped_by_watchpoint;
- mips_ops.to_can_use_hw_breakpoint = mips_can_use_watchpoint;
- mips_ops.to_kill = mips_kill;
- mips_ops.to_load = mips_load;
- mips_ops.to_create_inferior = mips_create_inferior;
- mips_ops.to_mourn_inferior = mips_mourn_inferior;
- mips_ops.to_thread_alive = mips_thread_alive;
- mips_ops.to_pid_to_str = mips_pid_to_str;
- mips_ops.to_log_command = serial_log_command;
- mips_ops.to_stratum = process_stratum;
- mips_ops.to_has_all_memory = default_child_has_all_memory;
- mips_ops.to_has_memory = default_child_has_memory;
- mips_ops.to_has_stack = default_child_has_stack;
- mips_ops.to_has_registers = default_child_has_registers;
- mips_ops.to_has_execution = default_child_has_execution;
- mips_ops.to_magic = OPS_MAGIC;
-
- /* Copy the common fields to all four target vectors. */
- rockhopper_ops = pmon_ops = ddb_ops = lsi_ops = mips_ops;
-
- /* Initialize target-specific fields in the target vectors. */
- mips_ops.to_shortname = "mips";
- mips_ops.to_doc = "\
-Debug a board using the MIPS remote debugging protocol over a serial line.\n\
-The argument is the device it is connected to or, if it contains a colon,\n\
-HOST:PORT to access a board over a network";
- mips_ops.to_open = mips_open;
- mips_ops.to_wait = mips_wait;
-
- pmon_ops.to_shortname = "pmon";
- pmon_ops.to_doc = "\
-Debug a board using the PMON MIPS remote debugging protocol over a serial\n\
-line. The argument is the device it is connected to or, if it contains a\n\
-colon, HOST:PORT to access a board over a network";
- pmon_ops.to_open = pmon_open;
- pmon_ops.to_wait = mips_wait;
-
- ddb_ops.to_shortname = "ddb";
- ddb_ops.to_doc = "\
-Debug a board using the PMON MIPS remote debugging protocol over a serial\n\
-line. The first argument is the device it is connected to or, if it contains\n\
-a colon, HOST:PORT to access a board over a network. The optional second\n\
-parameter is the temporary file in the form HOST:FILENAME to be used for\n\
-TFTP downloads to the board. The optional third parameter is the local name\n\
-of the TFTP temporary file, if it differs from the filename seen by the board.";
- ddb_ops.to_open = ddb_open;
- ddb_ops.to_wait = mips_wait;
-
- rockhopper_ops.to_shortname = "rockhopper";
- rockhopper_ops.to_doc = ddb_ops.to_doc;
- rockhopper_ops.to_open = rockhopper_open;
- rockhopper_ops.to_wait = mips_wait;
-
- lsi_ops.to_shortname = "lsi";
- lsi_ops.to_doc = pmon_ops.to_doc;
- lsi_ops.to_open = lsi_open;
- lsi_ops.to_wait = mips_wait;
-
- /* Add the targets. */
- add_target (&mips_ops);
- add_target (&pmon_ops);
- add_target (&ddb_ops);
- add_target (&lsi_ops);
- add_target (&rockhopper_ops);
-
- add_setshow_zinteger_cmd ("timeout", no_class, &mips_receive_wait, _("\
-Set timeout in seconds for remote MIPS serial I/O."), _("\
-Show timeout in seconds for remote MIPS serial I/O."), NULL,
- NULL,
- NULL, /* FIXME: i18n: */
- &setlist, &showlist);
-
- add_setshow_zinteger_cmd ("retransmit-timeout", no_class,
- &mips_retransmit_wait, _("\
-Set retransmit timeout in seconds for remote MIPS serial I/O."), _("\
-Show retransmit timeout in seconds for remote MIPS serial I/O."), _("\
-This is the number of seconds to wait for an acknowledgement to a packet\n\
-before resending the packet."),
- NULL,
- NULL, /* FIXME: i18n: */
- &setlist, &showlist);
-
- add_setshow_zinteger_cmd ("syn-garbage-limit", no_class,
- &mips_syn_garbage, _("\
-Set the maximum number of characters to ignore when scanning for a SYN."), _("\
-Show the maximum number of characters to ignore when scanning for a SYN."), _("\
-This is the maximum number of characters GDB will ignore when trying to\n\
-synchronize with the remote system. A value of -1 means that there is no\n\
-limit. (Note that these characters are printed out even though they are\n\
-ignored.)"),
- NULL,
- NULL, /* FIXME: i18n: */
- &setlist, &showlist);
-
- add_setshow_string_cmd ("monitor-prompt", class_obscure,
- &mips_monitor_prompt, _("\
-Set the prompt that GDB expects from the monitor."), _("\
-Show the prompt that GDB expects from the monitor."), NULL,
- NULL,
- NULL, /* FIXME: i18n: */
- &setlist, &showlist);
-
- add_setshow_zinteger_cmd ("monitor-warnings", class_obscure,
- &monitor_warnings, _("\
-Set printing of monitor warnings."), _("\
-Show printing of monitor warnings."), _("\
-When enabled, monitor warnings about hardware breakpoints will be displayed."),
- NULL,
- NULL, /* FIXME: i18n: */
- &setlist, &showlist);
-
- add_com ("pmon", class_obscure, pmon_command,
- _("Send a packet to PMON (must be in debug mode)."));
-
- add_setshow_boolean_cmd ("mask-address", no_class, &mask_address_p, _("\
-Set zeroing of upper 32 bits of 64-bit addresses when talking to PMON targets."), _("\
-Show zeroing of upper 32 bits of 64-bit addresses when talking to PMON targets."), _("\
-Use \"on\" to enable the masking and \"off\" to disable it."),
- NULL,
- NULL, /* FIXME: i18n: */
- &setlist, &showlist);
- remote_mips_ptid = ptid_build (42000, 0, 42000);
-}
projects / binutils-gdb.git / commitdiff