+2006-02-27 Carlos O'Donell <carlos@codesourcery.com>
+
+ * po/Make-in: Add html target.
+
2006-02-27 Richard Sandiford <richard@codesourcery.com>
* elf-m10300.c (_bfd_mn10300_elf_finish_dynamic_symbol): Use the
+2006-02-27 Carlos O'Donell <carlos@codesourcery.com
+
+ * Makefile.am: Add html target.
+ * Makefile.in: Regenerate.
+
2005-07-24 Daniel Jacobowitz <dan@codesourcery.com>
* chew.c: Include <string.h>.
protos: libbfd.h libcoff.h bfd.h
-$(srcdir)/bfd.info bfd.dvi: $(DOCFILES) bfdsumm.texi bfd.texinfo
+$(srcdir)/bfd.info bfd.dvi bfd.html: $(DOCFILES) bfdsumm.texi bfd.texinfo
# We can't replace these rules with an implicit rule, because
# makes without VPATH support couldn't find the .h files in `..'.
protos: libbfd.h libcoff.h bfd.h
-$(srcdir)/bfd.info bfd.dvi: $(DOCFILES) bfdsumm.texi bfd.texinfo
+$(srcdir)/bfd.info bfd.dvi bfd.html: $(DOCFILES) bfdsumm.texi bfd.texinfo
# We can't replace these rules with an implicit rule, because
# makes without VPATH support couldn't find the .h files in `..'.
cat-id-tbl.o: ../intl/libgettext.h
-dvi info tags TAGS ID:
+html dvi info tags TAGS ID:
mostlyclean:
rm -f core core.* *.pox $(PACKAGE).po *.old.po cat-id-tbl.tmp
+2006-02-27 Carlos O'Donell <carlos@codesourcery.com>
+
+ * po/Make-in: Add html target.
+
2006-02-17 Nick Hudson <nick.hudson@dsl.pipex.com>
* readelf.c (get_machine_flags): Add logic for missing EF_SH flags.
cat-id-tbl.o: ../intl/libgettext.h
-dvi info tags TAGS ID:
+html dvi info tags TAGS ID:
mostlyclean:
rm -f core core.* *.pox $(PACKAGE).po *.old.po cat-id-tbl.tmp
+2006-02-27 Carlos O'Donell <carlos@codesourcery.com>
+
+ * Makefile.in: TEXI2HTML uses makeinfo. Define
+ HTMLFILES. Add html targets.
+ * configure.texi: Use ifnottex. Add alternative
+ image format specifier as jpg.
+ * standards.texi: Use ifnottex.
+
2005-10-21 Mark Mitchell <mark@codesourcery.com>
* texi2pod.pl: Substitue for @value even when part of @include.
TEXI2DVI = `if [ -f ../texinfo/util/texi2dvi ]; \
then echo ../texinfo/util/texi2dvi; \
else echo texi2dvi; fi`
-TEXI2HTML = texi2html
+TEXI2HTML = `if [ -f ../texinfo/makeinfo/makeinfo ]; \
+ then echo "../texinfo/makeinfo/makeinfo --html"; \
+ else echo "makeinfo --html"; fi`
+
DVIPS = dvips
# Where to find texinfo.tex to format documentation with TeX.
INFOFILES = standards.info configure.info
DVIFILES = standards.dvi configure.dvi
+HTMLFILES = standards.html configure.html
all: info
install: install-info
done; \
fi
+html:
+ for f in $(HTMLFILES); do \
+ if test -f $(srcdir)/`echo $$f | sed -e 's/.html$$/.texi/'`; then \
+ if $(MAKE) "TEXI2HTML=$(TEXI2HTML)" $$f; then \
+ true; \
+ else \
+ exit 1; \
+ fi; \
+ fi; \
+ done
+
+
dvi:
for f in $(DVIFILES); do \
if test -f $(srcdir)/`echo $$f | sed -e 's/.dvi$$/.texi/'`; then \
standards.info: $(srcdir)/standards.texi $(srcdir)/make-stds.texi
$(MAKEINFO) --no-split -I$(srcdir) -o standards.info $(srcdir)/standards.texi
+standards.html: $(srcdir)/standards.texi $(srcdir)/make-stds.texi
+ $(TEXI2HTML) --no-split -I$(srcdir) -o standards.html $(srcdir)/standards.texi
+
standards.dvi: $(srcdir)/standards.texi
TEXINPUTS=$(TEXIDIR):$$TEXINPUTS $(TEXI2DVI) $(srcdir)/standards.texi
rm -f configdev.eps configbuild.eps
configure.html: $(srcdir)/configure.texi
- $(TEXI2HTML) -split_chapter $(srcdir)/configure.texi
+ cp $(srcdir)/configdev.jin configdev.jpg
+ cp $(srcdir)/configbuild.jin configbuild.jpg
+ $(TEXI2HTML) --no-split -I$(srcdir) -o configure.html $(srcdir)/configure.texi
clean:
rm -f *.aux *.cp *.cps *.dvi *.fn *.fns *.ky *.kys *.log
rm -f *.pg *.pgs *.toc *.tp *.tps *.vr *.vrs
- rm -f configdev.txt configbuild.txt configdev.eps configbuild.eps
+ rm -f configdev.txt configbuild.txt
+ rm -f configdev.eps configbuild.eps
rm -f configdev.jpg configbuild.jpg
mostlyclean: clean
rm -f Makefile config.status config.cache
maintainer-clean realclean: distclean
+ rm -f *.html*
rm -f *.info*
Makefile: $(srcdir)/Makefile.in $(host_makefile_frag) $(target_makefile_frag)
* configure: (configure). The GNU configure and build system
@end direntry
-@ifinfo
+@ifnottex
This file documents the GNU configure and build system.
Copyright (C) 1998 Cygnus Solutions.
into another language, under the above conditions for modified versions,
except that this permission notice may be stated in a translation approved
by the Foundation.
-@end ifinfo
+@end ifnottex
@titlepage
@title The GNU configure and build system
approved by the Free Software Foundation.
@end titlepage
-@ifinfo
+@ifnottex
@node Top
@top GNU configure and build system
* Index:: Index.
@end menu
-@end ifinfo
+@end ifnottex
@node Introduction
@chapter Introduction
@end ifnotinfo
(e.g., @samp{autoheader} is the name of a tool, not the name of a file).
-@image{configdev}
+@image{configdev,,,,jpg}
@node Written Developer Files
@subsection Written Developer Files
@file{config.status} is both a created file and a shell script which is
run to create other files, and the picture attempts to show that.
-@image{configbuild}
+@image{configbuild,,,,jpg}
@node Build Files Description
@subsection Build Files Description
@set lastupdate February 14, 2002
@c %**end of header
-@ifinfo
+@ifnottex
@format
START-INFO-DIR-ENTRY
* Standards: (standards). GNU coding standards.
END-INFO-DIR-ENTRY
@end format
-@end ifinfo
+@end ifnottex
@c @setchapternewpage odd
@setchapternewpage off
@iftex
@set CHAPTER chapter
@end iftex
-@ifinfo
+@ifnottex
@set CHAPTER node
-@end ifinfo
+@end ifnottex
-@ifinfo
+@ifnottex
GNU Coding Standards
Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 Free Software Foundation, Inc.
Front-Cover Texts, and with no Back-Cover Texts.
A copy of the license is included in the section entitled ``GNU
Free Documentation License''.
-@end ifinfo
+@end ifnottex
@titlepage
@title GNU Coding Standards
Free Documentation License''.
@end titlepage
-@ifinfo
+@ifnottex
@node Top, Preface, (dir), (dir)
@top Version
Last updated @value{lastupdate}.
-@end ifinfo
+@end ifnottex
@menu
* Preface:: About the GNU Coding Standards
+2006-02-27 Carlos O'Donell <carlos@codesourcery.com>
+
+ * doc/Makefile.am: Add html target.
+ * doc/Makefile.in: Regenerate.
+ * po/Make-in: Add html target.
+
2006-02-27 H.J. Lu <hongjiu.lu@intel.com>
* gas/config/tc-i386.c (output_insn): Support Intel Merom New
eval `grep '^ *VERSION=' $(srcdir)/../../bfd/configure`; \
echo "@set VERSION $$VERSION" > $@
-$(srcdir)/as.info: $(srcdir)/as.texinfo asconfig.texi gasver.texi $(CPU_DOCS)
-as.dvi: $(srcdir)/as.texinfo asconfig.texi gasver.texi $(CPU_DOCS)
+$(srcdir)/as.info as.dvi as.html: $(srcdir)/as.texinfo asconfig.texi gasver.texi $(CPU_DOCS)
# We want install to imply install-info as per GNU standards, despite the
# cygnus option.
rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
exit 1; \
fi
+$(srcdir)/as.info: as.texinfo
+as.dvi: as.texinfo
as.pdf: as.texinfo
as.html: as.texinfo
.dvi.ps:
eval `grep '^ *VERSION=' $(srcdir)/../../bfd/configure`; \
echo "@set VERSION $$VERSION" > $@
-$(srcdir)/as.info: $(srcdir)/as.texinfo asconfig.texi gasver.texi $(CPU_DOCS)
-as.dvi: $(srcdir)/as.texinfo asconfig.texi gasver.texi $(CPU_DOCS)
+$(srcdir)/as.info as.dvi as.html: $(srcdir)/as.texinfo asconfig.texi gasver.texi $(CPU_DOCS)
# We want install to imply install-info as per GNU standards, despite the
# cygnus option.
cat-id-tbl.o: ../intl/libgettext.h
-dvi info tags TAGS ID:
+html dvi info tags TAGS ID:
mostlyclean:
rm -f core core.* *.pox $(PACKAGE).po *.old.po cat-id-tbl.tmp
+2006-02-27 Carlos O'Donell <carlos@codesourcery.com>
+
+ * po/Make-in: Add html target.
+
For older changes see ChangeLog-2005
\f
Local Variables:
cat-id-tbl.o: ../intl/libgettext.h
-dvi info tags TAGS ID:
+html dvi info tags TAGS ID:
mostlyclean:
rm -f core core.* *.pox $(PACKAGE).po *.old.po cat-id-tbl.tmp
+2006-02-27 Carlos O'Donell <carlos@codesourcery.com>
+
+ * intl/Makefile.in: Add html target.
+
2005-05-13 Nick Clifton <nickc@redhat.com>
* Update the address and phone number of the FSF organization in
rm -f $(gettextsrcdir)/$$file; \
done
-info dvi:
+html info dvi:
$(OBJECTS): config.h libgettext.h
bindtextdom.$lo finddomain.$lo loadmsgcat.$lo: gettextP.h gettext.h loadinfo.h
+2006-02-27 Carlos O'Donell <carlos@codesourcery.com>
+
+ * Makefile.am: Add html target.
+ * Makefile.in: Regenerate.
+ * po/Make-in: Add html target.
+
2006-02-17 Shrirang Khisti <shrirangk@kpitcummins.com>
Anil Paranjape <anilp1@kpitcummins.com>
Shilin Shakti <shilins@kpitcummins.com>
eval `grep '^ *VERSION=' $(srcdir)/../bfd/configure`; \
echo "@set VERSION $$VERSION" > $@
-$(srcdir)/ld.info: $(srcdir)/ld.texinfo configdoc.texi ldver.texi
-ld.dvi: $(srcdir)/ld.texinfo configdoc.texi ldver.texi
+$(srcdir)/ld.info ld.dvi ld.html: $(srcdir)/ld.texinfo configdoc.texi ldver.texi
# Build the man page from the texinfo file
# The sed command removes the no-adjust Nroff command so that
rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
exit 1; \
fi
+$(srcdir)/ld.info: ld.texinfo
+ld.dvi: ld.texinfo
ld.pdf: ld.texinfo
ld.html: ld.texinfo
.dvi.ps:
eval `grep '^ *VERSION=' $(srcdir)/../bfd/configure`; \
echo "@set VERSION $$VERSION" > $@
-$(srcdir)/ld.info: $(srcdir)/ld.texinfo configdoc.texi ldver.texi
-ld.dvi: $(srcdir)/ld.texinfo configdoc.texi ldver.texi
+$(srcdir)/ld.info ld.dvi ld.html: $(srcdir)/ld.texinfo configdoc.texi ldver.texi
# Build the man page from the texinfo file
# The sed command removes the no-adjust Nroff command so that
cat-id-tbl.o: ../intl/libgettext.h
-dvi info tags TAGS ID:
+html dvi info tags TAGS ID:
mostlyclean:
rm -f core core.* *.pox $(PACKAGE).po *.old.po cat-id-tbl.tmp
+2006-02-27 Carlos O'Donell <carlos@codesourcery.com>
+
+ * po/Make-in: Add html target.
+
2006-02-27 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (IS_3BYTE_OPCODE): New for 3-byte opcodes used by
cat-id-tbl.o: ../intl/libgettext.h
-dvi info tags TAGS ID:
+html dvi info tags TAGS ID:
mostlyclean:
rm -f core core.* *.pox $(PACKAGE).po *.old.po cat-id-tbl.tmp
projects / binutils-gdb.git / commitdiff