* mips.h: Remove documentation of "+D" and "+T".
opcodes/
* mips-opc.c (mips_builtin_opcodes): Remove "+D" and "+T" entries.
* micromips-opc.c (micromips_opcodes): Likewise.
* mips-dis.c (print_insn_args, print_insn_micromips): Remove "+D"
and "+T" handling. Check for a "0" suffix when deciding whether to
use coprocessor 0 names. In that case, also check for ",H" selectors.
gas/
* config/tc-mips.c (validate_mips_insn, validate_micromips_insn)
(mips_ip): Remove "+D" and "+T" handling.
gas/testsuite/
* gas/mips/lb.d, gas/mips/sb.d: Use coprocessor register names
for LWC0 and SWC0.
+2013-07-07 Richard Sandiford <rdsandiford@googlemail.com>
+
+ * config/tc-mips.c (validate_mips_insn, validate_micromips_insn)
+ (mips_ip): Remove "+D" and "+T" handling.
+
2013-07-05 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* config/tc-s390.c (md_gather_operands, md_apply_fix): Support new
case 'A': USE_BITS (OP_MASK_SHAMT, OP_SH_SHAMT); break;
case 'B': USE_BITS (OP_MASK_INSMSB, OP_SH_INSMSB); break;
case 'C': USE_BITS (OP_MASK_EXTMSBD, OP_SH_EXTMSBD); break;
- case 'D': USE_BITS (OP_MASK_RD, OP_SH_RD);
- USE_BITS (OP_MASK_SEL, OP_SH_SEL); break;
case 'E': USE_BITS (OP_MASK_SHAMT, OP_SH_SHAMT); break;
case 'F': USE_BITS (OP_MASK_INSMSB, OP_SH_INSMSB); break;
case 'G': USE_BITS (OP_MASK_EXTMSBD, OP_SH_EXTMSBD); break;
case 'I': break;
case 'J': USE_BITS (OP_MASK_CODE10, OP_SH_CODE10); break;
case 't': USE_BITS (OP_MASK_RT, OP_SH_RT); break;
- case 'T': USE_BITS (OP_MASK_RT, OP_SH_RT);
- USE_BITS (OP_MASK_SEL, OP_SH_SEL); break;
case 'x': USE_BITS (OP_MASK_BBITIND, OP_SH_BBITIND); break;
case 'X': USE_BITS (OP_MASK_BBITIND, OP_SH_BBITIND); break;
case 'p': USE_BITS (OP_MASK_CINSPOS, OP_SH_CINSPOS); break;
case 'A': USE_BITS (EXTLSB); break;
case 'B': USE_BITS (INSMSB); break;
case 'C': USE_BITS (EXTMSBD); break;
- case 'D': USE_BITS (RS); USE_BITS (SEL); break;
case 'E': USE_BITS (EXTLSB); break;
case 'F': USE_BITS (INSMSB); break;
case 'G': USE_BITS (EXTMSBD); break;
s = expr_end;
continue;
- case 'D':
- /* +D is for disassembly only; never match. */
- break;
-
case 'I':
/* "+I" is like "I", except that imm2_expr is used. */
my_getExpression (&imm2_expr, s);
s = expr_end;
continue;
- case 'T': /* Coprocessor register. */
- gas_assert (!mips_opts.micromips);
- /* +T is for disassembly only; never match. */
- break;
-
case 't': /* Coprocessor register number. */
gas_assert (!mips_opts.micromips);
if (s[0] == '$' && ISDIGIT (s[1]))
+2013-07-07 Richard Sandiford <rdsandiford@googlemail.com>
+
+ * gas/mips/lb.d, gas/mips/sb.d: Use coprocessor register names
+ for LWC0 and SWC0.
+
2013-07-05 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* gas/s390/zarch-zEC12.s: Change bprp second operand and add
0+0378 <[^>]*> lw a0,0\(zero\)
0+037c <[^>]*> lwl a0,0\(zero\)
0+0380 <[^>]*> lwr a0,0\(zero\)
-0+0384 <[^>]*> lwc0 \$4,0\(zero\)
+0+0384 <[^>]*> lwc0 (c0_context|\$4),0\(zero\)
0+0388 <[^>]*> lwc1 \$f4,0\(zero\)
0+038c <[^>]*> lwc2 \$4,0\(zero\)
0+0390 <[^>]*> lwc3 \$4,0\(zero\)
0+0370 <[^>]*> sw a1,4\(zero\)
0+0374 <[^>]*> sh a0,0\(zero\)
0+0378 <[^>]*> sw a0,0\(zero\)
-0+037c <[^>]*> swc0 \$4,0\(zero\)
+0+037c <[^>]*> swc0 c0_context,0\(zero\)
0+0380 <[^>]*> swc1 \$f4,0\(zero\)
0+0384 <[^>]*> swc2 \$4,0\(zero\)
0+0388 <[^>]*> swc3 \$4,0\(zero\)
+2013-07-07 Richard Sandiford <rdsandiford@googlemail.com>
+
+ * mips.h: Remove documentation of "+D" and "+T".
+
2013-06-26 Richard Sandiford <rdsandiford@googlemail.com>
* mips.h: Fix comment for "1": it is now STYPE rather than SHAMT.
"e" 5 bit vector register byte specifier (OP_*_VECBYTE)
"%" 3 bit immediate vr5400 vector alignment operand (OP_*_VECALIGN)
see also "k" above
- "+D" Combined destination register ("G") and sel ("H") for CP0 ops,
- for pretty-printing in disassembly only.
Macro instructions:
"A" General 32 bit expression
"&" 2 bit dsp/smartmips accumulator register (OP_*_MTACC_D)
"g" 5 bit coprocessor 1 and 2 destination register (OP_*_RD)
"+t" 5 bit coprocessor 0 destination register (OP_*_RT)
- "+T" 5 bit coprocessor 0 destination register (OP_*_RT) - disassembly only
MCU ASE usage:
"~" 12 bit offset (OP_*_OFFSET12)
Extension character sequences used so far ("+" followed by the
following), for quick reference when adding more:
"1234"
- "ABCDEFGHIJPQSTXZ"
+ "ABCEFGHIJPQSXZ"
"abcjpstxz"
*/
"E" 5-bit target register (MICROMIPSOP_*_RT)
"G" 5-bit source register (MICROMIPSOP_*_RS)
"H" 3-bit sel field for (D)MTC* and (D)MFC* (MICROMIPSOP_*_SEL)
- "+D" combined source register ("G") and sel ("H") for CP0 ops,
- for pretty-printing in disassembly only
Macro instructions:
"A" general 32 bit expression
following), for quick reference when adding more:
"j"
""
- "ABCDEFGHI"
+ "ABCEFGHI"
""
Extension character sequences used so far ("m" followed by the
+2013-07-07 Richard Sandiford <rdsandiford@googlemail.com>
+
+ * mips-opc.c (mips_builtin_opcodes): Remove "+D" and "+T" entries.
+ * micromips-opc.c (micromips_opcodes): Likewise.
+ * mips-dis.c (print_insn_args, print_insn_micromips): Remove "+D"
+ and "+T" handling. Check for a "0" suffix when deciding whether to
+ use coprocessor 0 names. In that case, also check for ",H" selectors.
+
2013-07-05 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* s390-opc.c (J12_12, J24_24): New macros.
{"dli", "t,i", 0x50000000, 0xfc1f0000, WR_t, 0, I3 }, /* ori */
{"dli", "t,I", 0, (int) M_DLI, INSN_MACRO, 0, I3 },
{"dmfc0", "t,G", 0x580000fc, 0xfc00ffff, WR_t|RD_C0, 0, I3 },
-{"dmfc0", "t,+D", 0x580000fc, 0xfc00c7ff, WR_t|RD_C0, 0, I3 },
{"dmfc0", "t,G,H", 0x580000fc, 0xfc00c7ff, WR_t|RD_C0, 0, I3 },
{"dmfgc0", "t,G", 0x580000e7, 0xfc00ffff, WR_t|RD_C0, 0, 0, IVIRT64 },
-{"dmfgc0", "t,+D", 0x580000e7, 0xfc00c7ff, WR_t|RD_C0, 0, 0, IVIRT64 },
{"dmfgc0", "t,G,H", 0x580000e7, 0xfc00c7ff, WR_t|RD_C0, 0, 0, IVIRT64 },
{"dmtc0", "t,G", 0x580002fc, 0xfc00ffff, RD_t|WR_C0|WR_CC, 0, I3 },
-{"dmtc0", "t,+D", 0x580002fc, 0xfc00c7ff, RD_t|WR_C0|WR_CC, 0, I3 },
{"dmtc0", "t,G,H", 0x580002fc, 0xfc00c7ff, RD_t|WR_C0|WR_CC, 0, I3 },
{"dmtgc0", "t,G", 0x580002e7, 0xfc00ffff, RD_t|WR_C0|WR_CC, 0, 0, IVIRT64 },
-{"dmtgc0", "t,+D", 0x580002e7, 0xfc00c7ff, RD_t|WR_C0|WR_CC, 0, 0, IVIRT64 },
{"dmtgc0", "t,G,H", 0x580002e7, 0xfc00c7ff, RD_t|WR_C0|WR_CC, 0, 0, IVIRT64 },
{"dmfc1", "t,S", 0x5400243b, 0xfc00ffff, WR_t|RD_S|FP_S, 0, I3 },
{"dmfc1", "t,G", 0x5400243b, 0xfc00ffff, WR_t|RD_S|FP_S, 0, I3 },
{"maddu", "s,t", 0x0000db3c, 0xfc00ffff, RD_s|RD_t|MOD_HILO, 0, I1 },
{"maddu", "7,s,t", 0x00001abc, 0xfc003fff, MOD_a|RD_s|RD_t, 0, 0, D32 },
{"mfc0", "t,G", 0x000000fc, 0xfc00ffff, WR_t|RD_C0, 0, I1 },
-{"mfc0", "t,+D", 0x000000fc, 0xfc00c7ff, WR_t|RD_C0, 0, I1 },
{"mfc0", "t,G,H", 0x000000fc, 0xfc00c7ff, WR_t|RD_C0, 0, I1 },
{"mfc1", "t,S", 0x5400203b, 0xfc00ffff, WR_t|RD_S|FP_S, 0, I1 },
{"mfc1", "t,G", 0x5400203b, 0xfc00ffff, WR_t|RD_S|FP_S, 0, I1 },
{"mfc2", "t,G", 0x00004d3c, 0xfc00ffff, WR_t|RD_C2, 0, I1 },
{"mfgc0", "t,G", 0x000004fc, 0xfc00ffff, WR_t|RD_C0, 0, 0, IVIRT },
-{"mfgc0", "t,+D", 0x000004fc, 0xfc00c7ff, WR_t|RD_C0, 0, 0, IVIRT },
{"mfgc0", "t,G,H", 0x000004fc, 0xfc00c7ff, WR_t|RD_C0, 0, 0, IVIRT },
{"mfhc1", "t,S", 0x5400303b, 0xfc00ffff, WR_t|RD_S|FP_D, 0, I1 },
{"mfhc1", "t,G", 0x5400303b, 0xfc00ffff, WR_t|RD_S|FP_D, 0, I1 },
{"msubu", "s,t", 0x0000fb3c, 0xfc00ffff, RD_s|RD_t|MOD_HILO, 0, I1 },
{"msubu", "7,s,t", 0x00003abc, 0xfc003fff, MOD_a|RD_s|RD_t, 0, 0, D32 },
{"mtc0", "t,G", 0x000002fc, 0xfc00ffff, RD_t|WR_C0|WR_CC, 0, I1 },
-{"mtc0", "t,+D", 0x000002fc, 0xfc00c7ff, RD_t|WR_C0|WR_CC, 0, I1 },
{"mtc0", "t,G,H", 0x000002fc, 0xfc00c7ff, RD_t|WR_C0|WR_CC, 0, I1 },
{"mtc1", "t,S", 0x5400283b, 0xfc00ffff, RD_t|WR_S|FP_S, 0, I1 },
{"mtc1", "t,G", 0x5400283b, 0xfc00ffff, RD_t|WR_S|FP_S, 0, I1 },
{"mtc2", "t,G", 0x00005d3c, 0xfc00ffff, RD_t|WR_C2|WR_CC, 0, I1 },
{"mtgc0", "t,G", 0x000006fc, 0xfc00ffff, RD_t|WR_C0|WR_CC, 0, 0, IVIRT },
-{"mtgc0", "t,+D", 0x000006fc, 0xfc00c7ff, RD_t|WR_C0|WR_CC, 0, 0, IVIRT },
{"mtgc0", "t,G,H", 0x000006fc, 0xfc00c7ff, RD_t|WR_C0|WR_CC, 0, 0, IVIRT },
{"mthc1", "t,S", 0x5400383b, 0xfc00ffff, RD_t|WR_S|FP_D, 0, I1 },
{"mthc1", "t,G", 0x5400383b, 0xfc00ffff, RD_t|WR_S|FP_D, 0, I1 },
const struct mips_opcode *opp)
{
const fprintf_ftype infprintf = info->fprintf_func;
- unsigned int lsb, msb, msbd;
+ unsigned int lsb, msb, msbd, cpreg;
void *is = info->stream;
- int op;
lsb = 0;
infprintf (is, "0x%x", msbd + 1);
break;
- case 'D':
- {
- const struct mips_cp0sel_name *n;
- unsigned int cp0reg, sel;
-
- cp0reg = GET_OP (l, RD);
- sel = GET_OP (l, SEL);
-
- /* CP0 register including 'sel' code for mtcN (et al.), to be
- printed textually if known. If not known, print both
- CP0 register name and sel numerically since CP0 register
- with sel 0 may have a name unrelated to register being
- printed. */
- n = lookup_mips_cp0sel_name(mips_cp0sel_names,
- mips_cp0sel_names_len, cp0reg, sel);
- if (n != NULL)
- infprintf (is, "%s", n->name);
- else
- infprintf (is, "$%d,%d", cp0reg, sel);
- break;
- }
-
case 'E':
lsb = GET_OP (l, SHAMT) + 32;
infprintf (is, "0x%x", lsb);
infprintf (is, "%s", mips_cp0_names[GET_OP (l, RT)]);
break;
- case 'T': /* Coprocessor 0 reg name */
- {
- const struct mips_cp0sel_name *n;
- unsigned int cp0reg, sel;
-
- cp0reg = GET_OP (l, RT);
- sel = GET_OP (l, SEL);
-
- /* CP0 register including 'sel' code for mftc0, to be
- printed textually if known. If not known, print both
- CP0 register name and sel numerically since CP0 register
- with sel 0 may have a name unrelated to register being
- printed. */
- n = lookup_mips_cp0sel_name(mips_cp0sel_names,
- mips_cp0sel_names_len, cp0reg, sel);
- if (n != NULL)
- infprintf (is, "%s", n->name);
- else
- infprintf (is, "$%d,%d", cp0reg, sel);
- break;
- }
-
case 'x': /* bbit bit index */
infprintf (is, "0x%x", GET_OP (l, BBITIND));
break;
break;
case 'E':
- /* Coprocessor register for lwcN instructions, et al.
-
- Note that there is no load/store cp0 instructions, and
- that FPU (cp1) instructions disassemble this field using
- 'T' format. Therefore, until we gain understanding of
- cp2 register names, we can simply print the register
- numbers. */
- infprintf (is, "$%d", GET_OP (l, RT));
- break;
+ cpreg = GET_OP (l, RT);
+ goto copro;
case 'G':
+ cpreg = GET_OP (l, RD);
+ copro:
/* Coprocessor register for mtcN instructions, et al. Note
that FPU (cp1) instructions disassemble this field using
'S' format. Therefore, we only need to worry about cp0,
cp2, and cp3. */
- op = GET_OP (l, OP);
- if (op == OP_OP_COP0)
- infprintf (is, "%s", mips_cp0_names[GET_OP (l, RD)]);
+ if (opp->name[strlen (opp->name) - 1] == '0')
+ {
+ if (d[1] == ',' && d[2] == 'H')
+ {
+ const struct mips_cp0sel_name *n;
+ unsigned int sel;
+
+ sel = GET_OP (l, SEL);
+
+ /* CP0 register including 'sel' code for mtcN (et al.), to be
+ printed textually if known. If not known, print both
+ CP0 register name and sel numerically since CP0 register
+ with sel 0 may have a name unrelated to register being
+ printed. */
+ n = lookup_mips_cp0sel_name (mips_cp0sel_names,
+ mips_cp0sel_names_len,
+ cpreg, sel);
+ if (n != NULL)
+ infprintf (is, "%s", n->name);
+ else
+ infprintf (is, "$%d,%d", cpreg, sel);
+ d += 2;
+ }
+ else
+ infprintf (is, "%s", mips_cp0_names[cpreg]);
+ }
else
- infprintf (is, "$%d", GET_OP (l, RD));
+ infprintf (is, "$%d", cpreg);
break;
case 'K':
/* Coprocessor register for mtcN instructions, et al. Note
that FPU (cp1) instructions disassemble this field using
'S' format. Therefore, we only need to worry about cp0,
- cp2, and cp3.
- The microMIPS encoding does not have a coprocessor
- identifier field as such, so we must work out the
- coprocessor number by looking at the opcode. */
- switch (insn
- & ~((MICROMIPSOP_MASK_RT << MICROMIPSOP_SH_RT)
- | (MICROMIPSOP_MASK_RS << MICROMIPSOP_SH_RS)))
+ cp2, and cp3. */
+ if (op->name[strlen (op->name) - 1] == '0')
{
- case 0x000000fc: /* mfc0 */
- case 0x000002fc: /* mtc0 */
- case 0x000004fc: /* mfgc0 */
- case 0x000006fc: /* mtgc0 */
- case 0x580000fc: /* dmfc0 */
- case 0x580002fc: /* dmtc0 */
- case 0x580000e7: /* dmfgc0 */
- case 0x580002e7: /* dmtgc0 */
- infprintf (is, "%s", mips_cp0_names[GET_OP (insn, RS)]);
- break;
- default:
- infprintf (is, "$%d", GET_OP (insn, RS));
- break;
+ if (s[1] == ',' && s[2] == 'H')
+ {
+ const struct mips_cp0sel_name *n;
+ unsigned int cp0reg, sel;
+
+ cp0reg = GET_OP (insn, RS);
+ sel = GET_OP (insn, SEL);
+
+ /* CP0 register including 'sel' code for mtcN
+ (et al.), to be printed textually if known.
+ If not known, print both CP0 register name and
+ sel numerically since CP0 register with sel 0 may
+ have a name unrelated to register being
+ printed. */
+ n = lookup_mips_cp0sel_name (mips_cp0sel_names,
+ mips_cp0sel_names_len,
+ cp0reg, sel);
+ if (n != NULL)
+ infprintf (is, "%s", n->name);
+ else
+ infprintf (is, "$%d,%d", cp0reg, sel);
+ s += 2;
+ }
+ else
+ infprintf (is, "%s", mips_cp0_names[GET_OP (insn, RS)]);
}
+ else
+ infprintf (is, "$%d", GET_OP (insn, RS));
break;
case 'H':
infprintf (is, "0x%x", msbd + 1);
break;
- case 'D':
- {
- const struct mips_cp0sel_name *n;
- unsigned int cp0reg, sel;
-
- cp0reg = GET_OP (insn, RS);
- sel = GET_OP (insn, SEL);
-
- /* CP0 register including 'sel' code for mtcN
- (et al.), to be printed textually if known.
- If not known, print both CP0 register name and
- sel numerically since CP0 register with sel 0 may
- have a name unrelated to register being printed. */
- n = lookup_mips_cp0sel_name (mips_cp0sel_names,
- mips_cp0sel_names_len,
- cp0reg, sel);
- if (n != NULL)
- infprintf (is, "%s", n->name);
- else
- infprintf (is, "$%d,%d", cp0reg, sel);
- break;
- }
-
case 'E':
lsb = GET_OP (insn, EXTLSB) + 32;
infprintf (is, "0x%x", lsb);
{"dmaccus", "d,s,t", 0x00000469, 0xfc0007ff, RD_s|RD_t|WR_LO|WR_d, 0, N412 },
{"dmadd16", "s,t", 0x00000029, 0xfc00ffff, RD_s|RD_t|MOD_LO, 0, N411 },
{"dmfc0", "t,G", 0x40200000, 0xffe007ff, LCD|WR_t|RD_C0, 0, I3, 0, EE },
-{"dmfc0", "t,+D", 0x40200000, 0xffe007f8, LCD|WR_t|RD_C0, 0, I64 },
{"dmfc0", "t,G,H", 0x40200000, 0xffe007f8, LCD|WR_t|RD_C0, 0, I64 },
{"dmfgc0", "t,G", 0x40600100, 0xffe007ff, LCD|WR_t|RD_C0, 0, 0, IVIRT64 },
-{"dmfgc0", "t,+D", 0x40600100, 0xffe007f8, LCD|WR_t|RD_C0, 0, 0, IVIRT64 },
{"dmfgc0", "t,G,H", 0x40600100, 0xffe007f8, LCD|WR_t|RD_C0, 0, 0, IVIRT64 },
{"dmt", "", 0x41600bc1, 0xffffffff, TRAP, 0, 0, MT32 },
{"dmt", "t", 0x41600bc1, 0xffe0ffff, TRAP|WR_t, 0, 0, MT32 },
{"dmtc0", "t,G", 0x40a00000, 0xffe007ff, COD|RD_t|WR_C0|WR_CC, 0, I3, 0, EE },
-{"dmtc0", "t,+D", 0x40a00000, 0xffe007f8, COD|RD_t|WR_C0|WR_CC, 0, I64 },
{"dmtc0", "t,G,H", 0x40a00000, 0xffe007f8, COD|RD_t|WR_C0|WR_CC, 0, I64 },
{"dmtgc0", "t,G", 0x40600300, 0xffe007ff, COD|RD_t|WR_C0|WR_CC, 0, 0, IVIRT64 },
-{"dmtgc0", "t,+D", 0x40600300, 0xffe007f8, COD|RD_t|WR_C0|WR_CC, 0, 0, IVIRT64 },
{"dmtgc0", "t,G,H", 0x40600300, 0xffe007f8, COD|RD_t|WR_C0|WR_CC, 0, 0, IVIRT64 },
{"dmfc1", "t,S", 0x44200000, 0xffe007ff, LCD|WR_t|RD_S|FP_D, 0, I3, 0, SF },
{"dmfc1", "t,G", 0x44200000, 0xffe007ff, LCD|WR_t|RD_S|FP_D, 0, I3, 0, SF },
{"mftacx", "d", 0x41020021, 0xffff07ff, TRAP|WR_d|RD_a, 0, 0, MT32 },
{"mftacx", "d,*", 0x41020021, 0xfff307ff, TRAP|WR_d|RD_a, 0, 0, MT32 },
{"mftc0", "d,+t", 0x41000000, 0xffe007ff, TRAP|LCD|WR_d|RD_C0, 0, 0, MT32 },
-{"mftc0", "d,+T", 0x41000000, 0xffe007f8, TRAP|LCD|WR_d|RD_C0, 0, 0, MT32 },
{"mftc0", "d,E,H", 0x41000000, 0xffe007f8, TRAP|LCD|WR_d|RD_C0, 0, 0, MT32 },
{"mftc1", "d,T", 0x41000022, 0xffe007ff, TRAP|LCD|WR_d|RD_T|FP_S, 0, 0, MT32 },
{"mftc1", "d,E", 0x41000022, 0xffe007ff, TRAP|LCD|WR_d|RD_T|FP_S, 0, 0, MT32 },
{"mftlo", "d,*", 0x41000021, 0xfff307ff, TRAP|WR_d|RD_a, 0, 0, MT32 },
{"mftr", "d,t,!,H,$", 0x41000000, 0xffe007c8, TRAP|WR_d, 0, 0, MT32 },
{"mfc0", "t,G", 0x40000000, 0xffe007ff, LCD|WR_t|RD_C0, 0, I1 },
-{"mfc0", "t,+D",0x40000000, 0xffe007f8, LCD|WR_t|RD_C0, 0, I32 },
{"mfc0", "t,G,H", 0x40000000, 0xffe007f8, LCD|WR_t|RD_C0, 0, I32 },
{"mfgc0", "t,G", 0x40600000, 0xffe007ff, LCD|WR_t|RD_C0, 0, 0, IVIRT },
-{"mfgc0", "t,+D", 0x40600000, 0xffe007f8, LCD|WR_t|RD_C0, 0, 0, IVIRT },
{"mfgc0", "t,G,H", 0x40600000, 0xffe007f8, LCD|WR_t|RD_C0, 0, 0, IVIRT },
{"mfc1", "t,S", 0x44000000, 0xffe007ff, LCD|WR_t|RD_S|FP_S, 0, I1 },
{"mfc1", "t,G", 0x44000000, 0xffe007ff, LCD|WR_t|RD_S|FP_S, 0, I1 },
{"mtpc", "t,P", 0x4080c801, 0xffe0ffc1, COD|RD_t|WR_C0, 0, M1|N5|EE },
{"mtps", "t,P", 0x4080c800, 0xffe0ffc1, COD|RD_t|WR_C0, 0, M1|N5|EE },
{"mtc0", "t,G", 0x40800000, 0xffe007ff, COD|RD_t|WR_C0|WR_CC, 0, I1 },
-{"mtc0", "t,+D", 0x40800000, 0xffe007f8, COD|RD_t|WR_C0|WR_CC, 0, I32 },
{"mtc0", "t,G,H", 0x40800000, 0xffe007f8, COD|RD_t|WR_C0|WR_CC, 0, I32 },
{"mtgc0", "t,G", 0x40600200, 0xffe007ff, COD|RD_t|WR_C0|WR_CC, 0, 0, IVIRT },
-{"mtgc0", "t,+D", 0x40600200, 0xffe007f8, COD|RD_t|WR_C0|WR_CC, 0, 0, IVIRT },
{"mtgc0", "t,G,H", 0x40600200, 0xffe007f8, COD|RD_t|WR_C0|WR_CC, 0, 0, IVIRT },
{"mtc1", "t,S", 0x44800000, 0xffe007ff, COD|RD_t|WR_S|FP_S, 0, I1 },
{"mtc1", "t,G", 0x44800000, 0xffe007ff, COD|RD_t|WR_S|FP_S, 0, I1 },
{"mtsab", "s,j", 0x04180000, 0xfc1f0000, RD_s, 0, EE },
{"mtsah", "s,j", 0x04190000, 0xfc1f0000, RD_s, 0, EE },
{"mttc0", "t,G", 0x41800000, 0xffe007ff, TRAP|COD|RD_t|WR_C0|WR_CC, 0, 0, MT32 },
-{"mttc0", "t,+D", 0x41800000, 0xffe007f8, TRAP|COD|RD_t|WR_C0|WR_CC, 0, 0, MT32 },
{"mttc0", "t,G,H", 0x41800000, 0xffe007f8, TRAP|COD|RD_t|WR_C0|WR_CC, 0, 0, MT32 },
{"mttc1", "t,S", 0x41800022, 0xffe007ff, TRAP|COD|RD_t|WR_S|FP_S, 0, 0, MT32 },
{"mttc1", "t,G", 0x41800022, 0xffe007ff, TRAP|COD|RD_t|WR_S|FP_S, 0, 0, MT32 },
projects / binutils-gdb.git / commitdiff