/* tc-d10v.c -- Assembler code for the Mitsubishi D10V
- Copyright 1996, 1997, 1998, 1999, 2000, 2001
+ Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2002
Free Software Foundation, Inc.
This file is part of GAS, the GNU Assembler.
#include "subsegs.h"
#include "opcode/d10v.h"
#include "elf/ppc.h"
-//#include "read.h"
const char comment_chars[] = ";";
const char line_comment_chars[] = "#";
static int parallel_ok PARAMS ((struct d10v_opcode *opcode1, unsigned long insn1,
struct d10v_opcode *opcode2, unsigned long insn2,
packing_type exec_type));
+
+static void check_resource_conflict PARAMS ((struct d10v_opcode *opcode1,
+ unsigned long insn1,
+ struct d10v_opcode *opcode2,
+ unsigned long insn2));
+
static symbolS * find_symbol_matching_register PARAMS ((expressionS *));
struct option md_longopts[] =
/* Truncate to the proper number of bits. */
if (check_range (value, bits, d10v_operands[op_type].flags))
as_bad_where (fix->fx_file, fix->fx_line,
- _("operand out of range: %d"), value);
+ _("operand out of range: %ld"), (long) value);
value &= 0x7FFFFFFF >> (31 - bits);
insn |= (value << shift);
/* Truncate to the proper number of bits. */
if ((opers[i].X_op == O_constant) && check_range (number, bits, flags))
- as_bad (_("operand out of range: %d"), number);
+ as_bad (_("operand out of range: %lu"), number);
number &= 0x7FFFFFFF >> (31 - bits);
insn = insn | (number << shift);
}
- /* kludge: for DIVS, we need to put the operands in twice */
- /* on the second pass, format is changed to LONG_R to force
- the second set of operands to not be shifted over 15. */
+ /* kludge: for DIVS, we need to put the operands in twice on the second
+ pass, format is changed to LONG_R to force the second set of operands
+ to not be shifted over 15. */
if ((opcode->opcode == OPCODE_DIVS) && (format == LONG_L))
insn = build_insn (opcode, opers, insn);
if (opcode->exec_type & PARONLY)
as_fatal (_("Instruction must be executed in parallel with another instruction."));
- /* The other container needs to be NOP. */
- /* According to 4.3.1: for FM=00, sub-instructions performed only
- by IU cannot be encoded in L-container. */
+ /* The other container needs to be NOP.
+ According to 4.3.1: for FM=00, sub-instructions performed only by IU
+ cannot be encoded in L-container. */
if (opcode->unit == IU)
insn |= FM00 | (NOP << 15); /* Right container. */
else
case PACK_UNSPEC: /* Order not specified. */
if (opcode1->exec_type & ALONE)
{
- /* Case of a short branch on a separate GAS line.
- Pack with NOP. */
+ /* Case of a short branch on a separate GAS line. Pack with NOP. */
write_1_short (opcode1, insn1, fx->next);
return 1;
}
}
else
insn = FM00 | (insn1 << 15) | insn2;
+ check_resource_conflict (opcode1, insn1, opcode2, insn2);
break;
case PACK_LEFT_RIGHT:
/* If this is auto parallization, and either instruction is a branch,
don't parallel. */
if (exec_type == PACK_UNSPEC
- && (op1->exec_type & ALONE || op2->exec_type & ALONE))
+ && (op1->exec_type & (ALONE | BRANCH)
+ || op2->exec_type & (ALONE | BRANCH)))
return 0;
/* The idea here is to create two sets of bitmasks (mod and used)
and the second reads the PSW (which includes C, F0, and F1), then
they cannot operate safely in parallel. */
- /* The bitmasks (mod and used) look like this (bit 31 = MSB). */
- /* r0-r15 0-15 */
- /* a0-a1 16-17 */
- /* cr (not psw) 18 */
- /* psw 19 */
- /* mem 20 */
+ /* The bitmasks (mod and used) look like this (bit 31 = MSB).
+ r0-r15 0-15
+ a0-a1 16-17
+ cr (not psw) 18
+ psw 19
+ mem 20 */
for (j = 0; j < 2; j++)
{
return 0;
}
+/* Determine if there are any resource conflicts among two manually
+ parallelized instructions. Some of this was lifted from parallel_ok. */
+
+static void
+check_resource_conflict (op1, insn1, op2, insn2)
+ struct d10v_opcode *op1, *op2;
+ unsigned long insn1, insn2;
+{
+ int i, j, flags, mask, shift, regno;
+ unsigned long ins, mod[2], used[2];
+ struct d10v_opcode *op;
+
+ if ((op1->exec_type & SEQ)
+ || ! ((op1->exec_type & PAR) || (op1->exec_type & PARONLY)))
+ {
+ as_warn (_("packing conflict: %s must dispatch sequentially"),
+ op1->name);
+ return;
+ }
+
+ if ((op2->exec_type & SEQ)
+ || ! ((op2->exec_type & PAR) || (op2->exec_type & PARONLY)))
+ {
+ as_warn (_("packing conflict: %s must dispatch sequentially"),
+ op2->name);
+ return;
+ }
+
+ /* The idea here is to create two sets of bitmasks (mod and used)
+ which indicate which registers are modified or used by each
+ instruction. The operation can only be done in parallel if
+ instruction 1 and instruction 2 modify different registers, and
+ the first instruction does not modify registers that the second
+ is using (The second instruction can modify registers that the
+ first is using as they are only written back after the first
+ instruction has completed). Accesses to control registers
+ and memory are treated as accesses to a single register. So if
+ both instructions write memory or if the first instruction writes
+ memory and the second reads, then they cannot be done in
+ parallel. We treat reads to the PSW (which includes C, F0, and F1)
+ in isolation. So simultaneously writing C and F0 in two different
+ sub-instructions is permitted. */
+
+ /* The bitmasks (mod and used) look like this (bit 31 = MSB).
+ r0-r15 0-15
+ a0-a1 16-17
+ cr (not psw) 18
+ psw(other) 19
+ mem 20
+ psw(C flag) 21
+ psw(F0 flag) 22 */
+
+ for (j = 0; j < 2; j++)
+ {
+ if (j == 0)
+ {
+ op = op1;
+ ins = insn1;
+ }
+ else
+ {
+ op = op2;
+ ins = insn2;
+ }
+ mod[j] = used[j] = 0;
+ if (op->exec_type & BRANCH_LINK)
+ mod[j] |= 1 << 13;
+
+ for (i = 0; op->operands[i]; i++)
+ {
+ flags = d10v_operands[op->operands[i]].flags;
+ shift = d10v_operands[op->operands[i]].shift;
+ mask = 0x7FFFFFFF >> (31 - d10v_operands[op->operands[i]].bits);
+ if (flags & OPERAND_REG)
+ {
+ regno = (ins >> shift) & mask;
+ if (flags & (OPERAND_ACC0 | OPERAND_ACC1))
+ regno += 16;
+ else if (flags & OPERAND_CONTROL) /* mvtc or mvfc */
+ {
+ if (regno == 0)
+ regno = 19;
+ else
+ regno = 18;
+ }
+ else if (flags & OPERAND_FFLAG)
+ regno = 22;
+ else if (flags & OPERAND_CFLAG)
+ regno = 21;
+
+ if ( flags & OPERAND_DEST )
+ {
+ mod[j] |= 1 << regno;
+ if (flags & OPERAND_EVEN)
+ mod[j] |= 1 << (regno + 1);
+ }
+ else
+ {
+ used[j] |= 1 << regno ;
+ if (flags & OPERAND_EVEN)
+ used[j] |= 1 << (regno + 1);
+
+ /* Auto inc/dec also modifies the register. */
+ if (op->operands[i+1] != 0
+ && (d10v_operands[op->operands[i+1]].flags
+ & (OPERAND_PLUS | OPERAND_MINUS)) != 0)
+ mod[j] |= 1 << regno;
+ }
+ }
+ else if (flags & OPERAND_ATMINUS)
+ {
+ /* SP implicitly used/modified. */
+ mod[j] |= 1 << 15;
+ used[j] |= 1 << 15;
+ }
+ }
+ if (op->exec_type & RMEM)
+ used[j] |= 1 << 20;
+ else if (op->exec_type & WMEM)
+ mod[j] |= 1 << 20;
+ else if (op->exec_type & RF0)
+ used[j] |= 1 << 22;
+ else if (op->exec_type & WF0)
+ mod[j] |= 1 << 22;
+ else if (op->exec_type & WCAR)
+ mod[j] |= 1 << 21;
+ }
+ if ((mod[0] & mod[1]) == 0)
+ return;
+ else
+ {
+ unsigned long x;
+ x = mod[0] & mod[1];
+
+ for (j = 0; j <= 15; j++)
+ if (x & (1 << j))
+ as_warn (_("resource conflict (R%d)"), j);
+ for (j = 16; j <= 17; j++)
+ if (x & (1 << j))
+ as_warn (_("resource conflict (A%d)"), j - 16);
+ if (x & (1 << 19))
+ as_warn (_("resource conflict (PSW)"));
+ if (x & (1 << 21))
+ as_warn (_("resource conflict (C flag)"));
+ if (x & (1 << 22))
+ as_warn (_("resource conflict (F flag)"));
+ }
+}
+
/* This is the main entry point for the machine-dependent assembler.
STR points to a machine-dependent instruction. This function is
supposed to emit the frags/bytes it assembles to. For the D10V, it
extype = PACK_RIGHT_LEFT;
}
}
- /* STR2 points to the separator, if there is one. */
+
+ /* str2 points to the separator, if there is one. */
if (str2)
{
*str2 = 0;
d10v_cleanup ();
if (prev_opcode
- && (write_2_short (prev_opcode, prev_insn, opcode, insn, extype, fixups) == 0))
+ && (0 == write_2_short (prev_opcode, prev_insn, opcode, insn, extype,
+ fixups)))
{
/* No instructions saved. */
prev_opcode = NULL;
return (insn);
}
-/* Find the symbol which has the same name as the register in EXP. */
+/* Find the symbol which has the same name as the register in exp. */
static symbolS *
find_symbol_matching_register (exp)
if (myops[opnum].X_op == O_constant)
{
if (!check_range (myops[opnum].X_add_number, bits, flags))
- return next_opcode;
+ break;
}
else
{
{
bits += 2;
if (!check_range (value, bits, flags))
- return next_opcode;
+ break;
}
}
else if (!check_range (value, bits, flags))
- return next_opcode;
+ break;
}
next_opcode++;
}
- as_fatal (_("value out of range"));
+
+ if (opcode->operands [i + 1] == 0)
+ as_fatal (_("value out of range"));
+ else
+ opcode = next_opcode;
}
else
{
/* Not a constant, so use a long instruction. */
- return opcode + 2;
+ opcode += 2;
}
}
- else
+
+ match = 0;
+
+ /* Now search the opcode table table for one with operands
+ that matches what we've got. */
+ while (!match)
{
- match = 0;
- /* Now search the opcode table table for one with operands
- that matches what we've got. */
- while (!match)
+ match = 1;
+ for (i = 0; opcode->operands[i]; i++)
{
- match = 1;
- for (i = 0; opcode->operands[i]; i++)
+ int flags = d10v_operands[opcode->operands[i]].flags;
+ int X_op = myops[i].X_op;
+ int num = myops[i].X_add_number;
+
+ if (X_op == 0)
{
- int flags = d10v_operands[opcode->operands[i]].flags;
- int X_op = myops[i].X_op;
- int num = myops[i].X_add_number;
+ match = 0;
+ break;
+ }
- if (X_op == 0)
+ if (flags & OPERAND_REG)
+ {
+ if ((X_op != O_register)
+ || (num & ~flags
+ & (OPERAND_GPR | OPERAND_ACC0 | OPERAND_ACC1
+ | OPERAND_FFLAG | OPERAND_CFLAG
+ | OPERAND_CONTROL))
+ || ((flags & OPERAND_SP) && ! (num & OPERAND_SP)))
{
match = 0;
break;
}
+ }
- if (flags & OPERAND_REG)
- {
- if ((X_op != O_register)
- || (num & ~flags
- & (OPERAND_GPR | OPERAND_ACC0 | OPERAND_ACC1
- | OPERAND_FFLAG | OPERAND_CFLAG
- | OPERAND_CONTROL))
- || ((flags & OPERAND_SP) && ! (num & OPERAND_SP)))
- {
- match = 0;
- break;
- }
- }
+ if (((flags & OPERAND_MINUS) && ((X_op != O_absent) || (num != OPERAND_MINUS))) ||
+ ((flags & OPERAND_PLUS) && ((X_op != O_absent) || (num != OPERAND_PLUS))) ||
+ ((flags & OPERAND_ATMINUS) && ((X_op != O_absent) || (num != OPERAND_ATMINUS))) ||
+ ((flags & OPERAND_ATPAR) && ((X_op != O_absent) || (num != OPERAND_ATPAR))) ||
+ ((flags & OPERAND_ATSIGN) && ((X_op != O_absent) || ((num != OPERAND_ATSIGN) && (num != OPERAND_ATPAR)))))
+ {
+ match = 0;
+ break;
+ }
- if (((flags & OPERAND_MINUS) && ((X_op != O_absent) || (num != OPERAND_MINUS))) ||
- ((flags & OPERAND_PLUS) && ((X_op != O_absent) || (num != OPERAND_PLUS))) ||
- ((flags & OPERAND_ATMINUS) && ((X_op != O_absent) || (num != OPERAND_ATMINUS))) ||
- ((flags & OPERAND_ATPAR) && ((X_op != O_absent) || (num != OPERAND_ATPAR))) ||
- ((flags & OPERAND_ATSIGN) && ((X_op != O_absent) || ((num != OPERAND_ATSIGN) && (num != OPERAND_ATPAR)))))
- {
- match = 0;
- break;
- }
+ /* Unfortunatly, for the indirect operand in instructions such
+ as ``ldb r1, @(c,r14)'' this function can be passed
+ X_op == O_register (because 'c' is a valid register name).
+ However we cannot just ignore the case when X_op == O_register
+ but flags & OPERAND_REG is null, so we check to see if a symbol
+ of the same name as the register exists. If the symbol does
+ exist, then the parser was unable to distinguish the two cases
+ and we fix things here. (Ref: PR14826) */
- /* Unfortunatly, for the indirect operand in
- instructions such as ``ldb r1, @(c,r14)'' this
- function can be passed X_op == O_register (because
- 'c' is a valid register name). However we cannot
- just ignore the case when X_op == O_register but
- flags & OPERAND_REG is null, so we check to see if a
- symbol of the same name as the register exists. If
- the symbol does exist, then the parser was unable to
- distinguish the two cases and we fix things here.
- (Ref: PR14826) */
-
- if (!(flags & OPERAND_REG) && (X_op == O_register))
- {
- symbolS *sym = find_symbol_matching_register (&myops[i]);
+ if (!(flags & OPERAND_REG) && (X_op == O_register))
+ {
+ symbolS * sym;
+
+ sym = find_symbol_matching_register (& myops[i]);
- if (sym != NULL)
- {
- myops[i].X_op = X_op = O_symbol;
- myops[i].X_add_symbol = sym;
- }
- else
- as_bad
- (_("illegal operand - register name found where none expected"));
+ if (sym != NULL)
+ {
+ myops[i].X_op = X_op = O_symbol;
+ myops[i].X_add_symbol = sym;
}
+ else
+ as_bad
+ (_("illegal operand - register name found where none expected"));
}
+ }
- /* We're only done if the operands matched so far AND there
+ /* We're only done if the operands matched so far AND there
are no more to check. */
- if (match && myops[i].X_op == 0)
- break;
- else
- match = 0;
+ if (match && myops[i].X_op == 0)
+ break;
+ else
+ match = 0;
- next_opcode = opcode + 1;
+ next_opcode = opcode + 1;
- if (next_opcode->opcode == 0)
- break;
+ if (next_opcode->opcode == 0)
+ break;
- if (strcmp (next_opcode->name, opcode->name))
- break;
+ if (strcmp (next_opcode->name, opcode->name))
+ break;
- opcode = next_opcode;
- }
+ opcode = next_opcode;
}
if (!match)
myops[i].X_op_symbol = NULL;
}
}
+ if ((d10v_operands[opcode->operands[i]].flags & OPERAND_CONTROL)
+ && (myops[i].X_add_number == OPERAND_CONTROL + 4
+ || myops[i].X_add_number == OPERAND_CONTROL + 5
+ || myops[i].X_add_number == OPERAND_CONTROL + 6
+ || myops[i].X_add_number == OPERAND_CONTROL + 12
+ || myops[i].X_add_number == OPERAND_CONTROL + 13
+ || myops[i].X_add_number == OPERAND_CONTROL + 15))
+ as_warn (_("cr%ld is a reserved control register"),
+ myops[i].X_add_number - OPERAND_CONTROL);
}
return opcode;
}
if (fixp->fx_r_type == BFD_RELOC_VTABLE_INHERIT
|| fixp->fx_r_type == BFD_RELOC_VTABLE_ENTRY)
reloc->address = fixp->fx_offset;
-
+
reloc->addend = fixp->fx_addnumber;
-
+
return reloc;
}
case BFD_RELOC_D10V_10_PCREL_L:
case BFD_RELOC_D10V_10_PCREL_R:
case BFD_RELOC_D10V_18_PCREL:
+ /* If the fix is relative to a global symbol, not a section
+ symbol, then ignore the offset.
+ XXX - Do we have to worry about branches to a symbol + offset ? */
+ if (fixP->fx_addsy != NULL
+ && S_IS_EXTERN (fixP->fx_addsy) )
+ {
+ segT fseg = S_GET_SEGMENT (fixP->fx_addsy);
+ segment_info_type *segf = seg_info(fseg);
+
+ if ( segf && segf->sym != fixP->fx_addsy)
+ value = 0;
+ }
+ /* Drop through. */
case BFD_RELOC_D10V_18:
/* Instruction addresses are always right-shifted by 2. */
value >>= AT_WORD_RIGHT_SHIFT;
rep = (struct d10v_opcode *) hash_find (d10v_hash, "rep");
repi = (struct d10v_opcode *) hash_find (d10v_hash, "repi");
if ((insn & FM11) == FM11
- && ( (repi != NULL && (insn & repi->mask) == (unsigned) repi->opcode)
- || (rep != NULL && (insn & rep->mask) == (unsigned) rep->opcode))
+ && ((repi != NULL
+ && (insn & repi->mask) == (unsigned) repi->opcode)
+ || (rep != NULL
+ && (insn & rep->mask) == (unsigned) rep->opcode))
&& value < 4)
as_fatal
(_("line %d: rep or repi must include at least 4 instructions"),
subseg_set (prev_seg, prev_subseg);
write_1_short (prev_opcode, prev_insn, fixups->next);
-
subseg_set (seg, subseg);
prev_opcode = NULL;
}
return 1;
}
-/* Like normal .word, except support @word. */
-/* Clobbers input_line_pointer, checks end-of-line. */
+/* Like normal .word, except support @word.
+ Clobbers input_line_pointer, checks end-of-line. */
static void
d10v_dot_word (dummy)
compatibility problem by simply ignoring any '#' at the beginning
of an operand. */
-/* Operands that begin with '#' should fall through to here. */
-/* From expr.c. */
+/* Operands that begin with '#' should fall through to here.
+ From expr.c. */
void
md_operand (expressionP)
projects / binutils-gdb.git / commitdiff