* i386v4-nat.c: Include "i386-tdep.h". Reformat and tweak various

comments.
(fill_gregset, supply_gregset, supply_fpregset, fill_fpregset):
Remove prototypes.
(supply_gregset, fill_gregset): Remove use of register keyword and
remove declaration for regmap.  Use I386_NUM_GREGS instead of
NUM_REGS and NUM_FREGS.
(FPREGSET_FSAVE_OFFSET): Remove.
(supply_fpregset, fill_fpregset): Use FPO_REGNUM instead of
NUM_FREGS to determine whether the floating-point registers are
available.

diff --git a/gdb/ChangeLog b/gdb/ChangeLog
index a1b2bace088a0cda311284207ebc749972d65d9f..3ca3777b4f5c013df4ec4dba9e15776fcff77902 100644 (file)
--- a/gdb/ChangeLog
+++ b/gdb/ChangeLog
@@ -1,5 +1,17 @@
 2002-06-15  Mark Kettenis  <kettenis@gnu.org>
 
+       * i386v4-nat.c: Include "i386-tdep.h".  Reformat and tweak various
+       comments.
+       (fill_gregset, supply_gregset, supply_fpregset, fill_fpregset):
+       Remove prototypes.
+       (supply_gregset, fill_gregset): Remove use of register keyword and
+       remove declaration for regmap.  Use I386_NUM_GREGS instead of
+       NUM_REGS and NUM_FREGS.
+       (FPREGSET_FSAVE_OFFSET): Remove.
+       (supply_fpregset, fill_fpregset): Use FPO_REGNUM instead of
+       NUM_FREGS to determine whether the floating-point registers are
+       available.
+
        * i386gnu-nat.c (supply_gregset, gnu_fetch_registers,
        gnu_store_registers): Replace usage of NUM_GREGS with
        I386_NUM_GREGS.

diff --git a/gdb/i386v4-nat.c b/gdb/i386v4-nat.c
index c67f1fb2f440a4706d44a0e4612f7f88160da2e8..7de8c148034272e83bcbfb888e7d9d76002e6a36 100644 (file)
--- a/gdb/i386v4-nat.c
+++ b/gdb/i386v4-nat.c
@@ -1,5 +1,6 @@
-/* Native-dependent code for SVR4 Unix running on i386's, for GDB.
-   Copyright 1988, 1989, 1991, 1992, 1996, 1997, 1998, 1999, 2000, 2001
+/* Native-dependent code for SVR4 Unix running on i386's.
+   Copyright 1988, 1989, 1991, 1992, 1996, 1997, 1998, 1999, 2000,
+   2001, 2002
    Free Software Foundation, Inc.
 
    This file is part of GDB.
@@ -27,8 +28,9 @@
 #ifdef HAVE_SYS_REG_H
 #include <sys/reg.h>
 #endif
-#include "i387-tdep.h"
 
+#include "i386-tdep.h"
+#include "i387-tdep.h"
 
 #ifdef HAVE_SYS_PROCFS_H
 
@@ -37,15 +39,16 @@
 /* Prototypes for supply_gregset etc. */
 #include "gregset.h"
 
-/*  The /proc interface divides the target machine's register set up into
-   two different sets, the general register set (gregset) and the floating
-   point register set (fpregset).  For each set, there is an ioctl to get
-   the current register set and another ioctl to set the current values.
+/* The `/proc' interface divides the target machine's register set up
+   into two different sets, the general purpose register set (gregset)
+   and the floating-point register set (fpregset).  For each set,
+   there is an ioctl to get the current register set and another ioctl
+   to set the current values.
 
-   The actual structure passed through the ioctl interface is, of course,
-   naturally machine dependent, and is different for each set of registers.
-   For the i386 for example, the general register set is typically defined
-   by:
+   The actual structure passed through the ioctl interface is, of
+   course, naturally machine dependent, and is different for each set
+   of registers.  For the i386 for example, the general-purpose
+   register set is typically defined by:
 
    typedef int gregset_t[19];           (in <sys/regset.h>)
 
@@ -55,36 +58,38 @@
    #define UESP 17
    #define SS   18
 
-   and the floating point set by:
-
-   typedef struct fpregset
-   {
-   union
-   {
-   struct fpchip_state  // fp extension state //
-   {
-   int state[27];       // 287/387 saved state //
-   int status;          // status word saved at exception //
-   } fpchip_state;
-   struct fp_emul_space // for emulators //
-   {
-   char fp_emul[246];
-   char fp_epad[2];
-   } fp_emul_space;
-   int f_fpregs[62];    // union of the above //
-   } fp_reg_set;
-   long f_wregs[33];            // saved weitek state //
+   and the floating-point set by:
+
+   typedef struct fpregset   {
+           union {
+                   struct fpchip_state            // fp extension state //
+                   {
+                           int     state[27];     // 287/387 saved state //
+                           int     status;        // status word saved at //
+                                                  // exception //
+                   } fpchip_state;
+                   struct fp_emul_space           // for emulators //
+                   {
+                           char    fp_emul[246];
+                           char    fp_epad[2];
+                   } fp_emul_space;
+                   int     f_fpregs[62];          // union of the above //
+           } fp_reg_set;
+           long            f_wregs[33];           // saved weitek state //
    } fpregset_t;
 
-   These routines provide the packing and unpacking of gregset_t and
-   fpregset_t formatted data.
+   Incidentally fpchip_state contains the FPU state in the same format
+   as used by the "fsave" instruction, and that's the only thing we
+   support here.  I don't know how the emulator stores it state.  The
+   Weitek stuff definitely isn't supported.
 
- */
+   The routines defined here, provide the packing and unpacking of
+   gregset_t and fpregset_t formatted data.  */
 
 #ifdef HAVE_GREGSET_T
 
-/* This is a duplicate of the table in i386-xdep.c. */
-
+/* Mapping between the general-purpose registers in `/proc'
+   format and GDB's register array layout.  */
 static int regmap[] =
 {
   EAX, ECX, EDX, EBX,
@@ -93,92 +98,63 @@ static int regmap[] =
   DS, ES, FS, GS,
 };
 
-/* Prototypes for local functions */
-
-void fill_gregset (gregset_t *, int);
-
-void supply_gregset (gregset_t *);
-
-void supply_fpregset (fpregset_t *);
-
-void fill_fpregset (fpregset_t *, int);
-
-
-/*  FIXME:  These routine absolutely depends upon (NUM_REGS - NUM_FREGS)
-   being less than or equal to the number of registers that can be stored
-   in a gregset_t.  Note that with the current scheme there will typically
-   be more registers actually stored in a gregset_t that what we know
-   about.  This is bogus and should be fixed. */
-
-/*  Given a pointer to a general register set in /proc format (gregset_t *),
-   unpack the register contents and supply them as gdb's idea of the current
-   register values. */
+/* Fill GDB's register array with the general-purpose register values
+   in *GREGSETP.  */
 
 void
 supply_gregset (gregset_t *gregsetp)
 {
-  register int regi;
-  register greg_t *regp = (greg_t *) gregsetp;
-  extern int regmap[];
-
-  for (regi = 0; regi < (NUM_REGS - NUM_FREGS); regi++)
-    {
-      supply_register (regi, (char *) (regp + regmap[regi]));
-    }
+  greg_t *regp = (greg_t *) gregsetp;
+  int i;
+
+  for (i = 0; i < I386_NUM_GREGS; i++)
+    supply_register (i, (char *) (regp + regmap[i]));
 }
 
+/* Fill register REGNO (if it is a general-purpose register) in
+   *GREGSETPS with the value in GDB's register array.  If REGNO is -1,
+   do this for all registers.  */
+
 void
 fill_gregset (gregset_t *gregsetp, int regno)
 {
-  int regi;
-  register greg_t *regp = (greg_t *) gregsetp;
-  extern int regmap[];
-
-  for (regi = 0; regi < (NUM_REGS - NUM_FREGS); regi++)
-    {
-      if ((regno == -1) || (regno == regi))
-       {
-         *(regp + regmap[regi]) = *(int *) &registers[REGISTER_BYTE (regi)];
-       }
-    }
+  greg_t *regp = (greg_t *) gregsetp;
+  int i;
+
+  for (i = 0; i < I386_NUM_GREGS; i++)
+    if (regno == -1 || regno == i)
+      regcache_collect (i, regp + regmap[i]);
 }
 
 #endif /* HAVE_GREGSET_T */
 
-#if defined (HAVE_FPREGSET_T)
-
-/*  Given a pointer to a floating point register set in /proc format
-   (fpregset_t *), unpack the register contents and supply them as gdb's
-   idea of the current floating point register values. */
+#ifdef HAVE_FPREGSET_T
 
-/* FIXME: Assumes that fpregsetp contains an i387 FSAVE area. */
-#if !defined(FPREGSET_FSAVE_OFFSET)
-#define FPREGSET_FSAVE_OFFSET  0
-#endif
+/* Fill GDB's register array with the floating-point register values in
+   *FPREGSETP.  */
 
 void
 supply_fpregset (fpregset_t *fpregsetp)
 {
-  if (NUM_FREGS == 0)
+  if (FP0_REGNUM == 0)
     return;
 
-  i387_supply_fsave ((char *) fpregsetp + FPREGSET_FSAVE_OFFSET);
+  i387_supply_fsave ((char *) fpregsetp);
 }
 
-/*  Given a pointer to a floating point register set in /proc format
-   (fpregset_t *), update the register specified by REGNO from gdb's idea
-   of the current floating point register set.  If REGNO is -1, update
-   them all. */
+/* Fill register REGNO (if it is a floating-point register) in
+   *FPREGSETP with the value in GDB's register array.  If REGNO is -1,
+   do this for all registers.  */
 
 void
 fill_fpregset (fpregset_t *fpregsetp, int regno)
 {
-  if (NUM_FREGS == 0)
+  if (FP0_REGNUM == 0)
     return;
 
-  i387_fill_fsave ((char *) fpregsetp + FPREGSET_FSAVE_OFFSET, regno);
+  i387_fill_fsave ((char *) fpregsetp, regno);
 }
 
-#endif /* defined (HAVE_FPREGSET_T) */
+#endif /* HAVE_FPREGSET_T */
 
 #endif /* HAVE_SYS_PROCFS_H */