From: Sergio Prado Date: Tue, 9 Feb 2016 18:14:52 +0000 (-0200) Subject: configs: pandaboard: bump u-boot to 2015.10 and kernel to 4.3 X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=000b972f49bcf9ed35417bb787a4440f22b12f8e;p=buildroot.git configs: pandaboard: bump u-boot to 2015.10 and kernel to 4.3 VFPv3 and NEON was enabled and a readme.txt file was added. Fixes bug #7580. Tested on Pandaboard ES. [Peter: use EABIhf] Signed-off-by: Sergio Prado Signed-off-by: Peter Korsgaard --- diff --git a/board/pandaboard/readme.txt b/board/pandaboard/readme.txt new file mode 100644 index 0000000000..8741349d19 --- /dev/null +++ b/board/pandaboard/readme.txt @@ -0,0 +1,76 @@ +Pandaboard +========== + +This file documents the Buildroot support for the Pandaboard, a +low-power, low-cost single-board computer development platform based +on the Texas Instruments OMAP4 system on a chip (SoC). + +Configuring and building Buildroot +---------------------------------- + +Start from the defconfig: + + $ make pandaboard_defconfig + +You can edit build options the usual way: + + $ make menuconfig + +When you are happy with the setup, run: + + $ make + +The result of the build with the default settings should be these files: + + output/images + ├── MLO + ├── omap4-panda-a4.dtb + ├── omap4-panda.dtb + ├── omap4-panda-es.dtb + ├── rootfs.ext2 + ├── u-boot.img + └── zImage + +Setting up your SD card +----------------------- + +*Important*: pay attention which partition you are modifying so you don't +accidentally erase the wrong file system, e.g your host computer or your +external storage! + +In the default setup you need to create two partitions on your SD card: +a boot partition and a rootfs partition. + +The ROM code from OMAP processors need the SD card to be formatted with +a special geometry in the partition table. To do that, you can use the +shell script below (this script was extracted from +http://elinux.org/Panda_How_to_MLO_%26_u-boot). + +#!/bin/sh +DRIVE=$1 +if [ -b "$DRIVE" ] ; then + dd if=/dev/zero of=$DRIVE bs=1024 count=1024 + SIZE=`fdisk -l $DRIVE | grep Disk | awk '{print $5}'` + echo DISK SIZE - $SIZE bytes + CYLINDERS=`echo $SIZE/255/63/512 | bc` + echo CYLINDERS - $CYLINDERS + { + echo ,9,0x0C,* + echo ,,,- + } | sfdisk -D -H 255 -S 63 -C $CYLINDERS $DRIVE + mkfs.vfat -F 32 -n "boot" ${DRIVE}1 + mke2fs -j -L "rootfs" ${DRIVE}2 +fi + +The next step is to mount the sdcard's first partition and copy MLO +and u-boot.img to it. + + $ sudo mkdir -p /mnt/sdcard + $ sudo mount /dev/sdX1 /mnt/sdcard + $ sudo cp MLO u-boot.img /mnt/sdcard + $ sudo umount /mnt/sdcard + +The last step is to copy the rootfs image to the sdcard's second +partition using 'dd': + + $ sudo dd if=rootfs.ext2 of=/dev/sdX2 bs=1M conv=fsync diff --git a/configs/pandaboard_defconfig b/configs/pandaboard_defconfig index 93ec1b0930..76b4caabda 100644 --- a/configs/pandaboard_defconfig +++ b/configs/pandaboard_defconfig @@ -1,37 +1,24 @@ -# Architecture BR2_arm=y BR2_cortex_a9=y - -# system -BR2_TARGET_GENERIC_GETTY=y +BR2_ARM_ENABLE_NEON=y +BR2_ARM_ENABLE_VFP=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_3=y BR2_TARGET_GENERIC_GETTY_PORT="ttyO2" -BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_DEVTMPFS=y - -# filesystem -BR2_TARGET_ROOTFS_EXT2=y -# BR2_TARGET_ROOTFS_TAR is not set - -# Linux headers same as kernel, a 3.12 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_12=y - -# Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12.2" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.3.3" BR2_LINUX_KERNEL_DEFCONFIG="omap2plus" -BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x80008000" -BR2_LINUX_KERNEL_APPENDED_UIMAGE=y -BR2_LINUX_KERNEL_APPENDED_DTB=y -BR2_LINUX_KERNEL_USE_INTREE_DTS=y -# might need omap4-panda or omap4-panda-a4 instead -BR2_LINUX_KERNEL_INTREE_DTS_NAME="omap4-panda-es" - -# Bootloaders +BR2_LINUX_KERNEL_ZIMAGE=y +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="omap4-panda-es omap4-panda omap4-panda-a4" +BR2_LINUX_KERNEL_INSTALL_TARGET=y +BR2_TARGET_ROOTFS_EXT2=y +# BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_VERSION=y +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2015.10" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="omap4_panda" BR2_TARGET_UBOOT_FORMAT_IMG=y -BR2_TARGET_UBOOT_BOARDNAME="omap4_panda" BR2_TARGET_UBOOT_SPL=y BR2_TARGET_UBOOT_SPL_NAME="MLO" -BR2_TARGET_UBOOT_LATEST_VERSION=n -BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2012.07"