From: Waldemar Brodkorb Date: Sat, 2 Jun 2018 20:07:20 +0000 (+0200) Subject: qemu: update defconfigs to Linux 4.16.7 X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=03fb00f2175cdb4565e26fcb9b3da1c1059de1bd;p=buildroot.git qemu: update defconfigs to Linux 4.16.7 All linux configs are renamed to a version neutral filename to avoid further renaming on kernel bumps. Defconfig Kernel Qemu Network Status -------------------------------------------------------------- aarch64_virt 4.16.7 2.12.0 YES OK arm_versatile 4.16.7 2.12.0 YES OK arm_versatile_nommu 4.16.7 2.12.0 YES OK (3) arm_vexpress 4.16.7 2.12.0 YES OK m68k_mcf5208 4.16.7 2.12.0 YES OK m68k_q800 4.16.7 q800-v2.11.0 NO (2) OK microblazebe 4.16.7 2.12.0 YES OK microblazeel 4.16.7 2.12.0 YES OK mips32r2el_malta 4.16.7 2.12.0 YES OK mips32r2_malta 4.16.7 2.12.0 YES OK mips32r6el_malta 4.16.7 2.12.0 YES OK mips32r6_malta 4.16.7 2.12.0 YES OK mips64el_malta 4.16.7 2.12.0 YES OK mips64_malta 4.16.7 2.12.0 YES OK mips64r6el_malta 4.16.7 2.12.0 YES OK mips64r6_malta 4.16.7 2.12.0 YES OK nios2-10m50 4.16.7 2.12.0 NO OK or1k 4.16.7 2.12.0 NO OK ppc_g3beige 4.16.7 2.12.0 YES OK ppc_mpc8544ds 4.16.7 2.12.0 YES OK ppc_virtex_ml507 4.16.7 2.12.0 NO OK ppc64_pseries 4.16.7 2.12.0 YES OK ppc64le_pseries 4.16.7 2.12.0 YES OK ppc64_e5500 4.16.7 2.12.0 YES OK sh4 4.16.7 2.12.0 YES OK sh4eb 4.16.7 2.12.0 NO (1) OK sparc_ss10 4.16.7 2.12.0 YES OK sparc64_sun4u 4.16.7 2.12.0 YES OK x86 4.16.7 2.12.0 YES OK x86_64 4.16.7 2.12.0 YES OK xtensa_lx60 4.16.7 2.12.0 YES OK xtensa_lx60_nommu 4.16.7 2.12.0 YES OK (1) - Probably an endian issue with 8139 emulation/driver (2) - There's a network interface, but enabling it in qemu fails (3) - Kernel patch required, switched to devicetree usage Signed-off-by: Waldemar Brodkorb Signed-off-by: Thomas Petazzoni --- diff --git a/board/qemu/aarch64-virt/linux-4.15.config b/board/qemu/aarch64-virt/linux-4.15.config deleted file mode 100644 index c9f2708ad5..0000000000 --- a/board/qemu/aarch64-virt/linux-4.15.config +++ /dev/null @@ -1,54 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_NO_HZ_IDLE=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_TASKSTATS=y -CONFIG_SCHED_AUTOGROUP=y -CONFIG_PROFILING=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_BLK_DEV_BSGLIB=y -CONFIG_ARCH_VEXPRESS=y -CONFIG_TRANSPARENT_HUGEPAGE=y -CONFIG_BINFMT_MISC=y -CONFIG_COMPAT=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_PACKET_DIAG=y -CONFIG_UNIX=y -CONFIG_NET_KEY=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_BRIDGE=m -CONFIG_NET_SCHED=y -CONFIG_VSOCKETS=y -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -CONFIG_VIRTIO_BLK=y -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_SG=y -CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_LOGGING=y -CONFIG_SCSI_SCAN_ASYNC=y -CONFIG_SCSI_VIRTIO=y -CONFIG_ATA=y -CONFIG_NETDEVICES=y -CONFIG_DUMMY=y -CONFIG_MACVLAN=y -CONFIG_VIRTIO_NET=y -CONFIG_NLMON=y -CONFIG_VT_HW_CONSOLE_BINDING=y -CONFIG_SERIAL_AMBA_PL011=y -CONFIG_SERIAL_AMBA_PL011_CONSOLE=y -CONFIG_VIRTIO_CONSOLE=y -CONFIG_HW_RANDOM=y -CONFIG_HW_RANDOM_VIRTIO=y -CONFIG_RTC_CLASS=y -CONFIG_VIRTIO_MMIO=y -CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y -CONFIG_MAILBOX=y -CONFIG_PL320_MBOX=y -CONFIG_EXT4_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/aarch64-virt/linux.config b/board/qemu/aarch64-virt/linux.config new file mode 100644 index 0000000000..c9f2708ad5 --- /dev/null +++ b/board/qemu/aarch64-virt/linux.config @@ -0,0 +1,54 @@ +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_NO_HZ_IDLE=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_TASKSTATS=y +CONFIG_SCHED_AUTOGROUP=y +CONFIG_PROFILING=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_BLK_DEV_BSGLIB=y +CONFIG_ARCH_VEXPRESS=y +CONFIG_TRANSPARENT_HUGEPAGE=y +CONFIG_BINFMT_MISC=y +CONFIG_COMPAT=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_PACKET_DIAG=y +CONFIG_UNIX=y +CONFIG_NET_KEY=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_BRIDGE=m +CONFIG_NET_SCHED=y +CONFIG_VSOCKETS=y +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_VIRTIO_BLK=y +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_SG=y +CONFIG_SCSI_CONSTANTS=y +CONFIG_SCSI_LOGGING=y +CONFIG_SCSI_SCAN_ASYNC=y +CONFIG_SCSI_VIRTIO=y +CONFIG_ATA=y +CONFIG_NETDEVICES=y +CONFIG_DUMMY=y +CONFIG_MACVLAN=y +CONFIG_VIRTIO_NET=y +CONFIG_NLMON=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_VIRTIO_CONSOLE=y +CONFIG_HW_RANDOM=y +CONFIG_HW_RANDOM_VIRTIO=y +CONFIG_RTC_CLASS=y +CONFIG_VIRTIO_MMIO=y +CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y +CONFIG_MAILBOX=y +CONFIG_PL320_MBOX=y +CONFIG_EXT4_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/aarch64-virt/readme.txt b/board/qemu/aarch64-virt/readme.txt index ce0b621366..76fc2d6f32 100644 --- a/board/qemu/aarch64-virt/readme.txt +++ b/board/qemu/aarch64-virt/readme.txt @@ -4,4 +4,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. -Tested with QEMU 2.11.0 +Tested with QEMU 2.12.0 diff --git a/board/qemu/arm-versatile/linux-4.13.config b/board/qemu/arm-versatile/linux-4.13.config deleted file mode 100644 index b1001d84a7..0000000000 --- a/board/qemu/arm-versatile/linux-4.13.config +++ /dev/null @@ -1,43 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_ARCH_MULTI_V7 is not set -CONFIG_ARCH_VERSATILE=y -CONFIG_PCI=y -CONFIG_PCI_VERSATILE=y -CONFIG_AEABI=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_SYM53C8XX_2=y -CONFIG_NETDEVICES=y -CONFIG_8139CP=y -CONFIG_PHYLIB=y -CONFIG_INPUT_EVDEV=y -CONFIG_SERIO_AMBAKMI=y -CONFIG_LEGACY_PTY_COUNT=16 -CONFIG_SERIAL_8250=m -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_8250_RSA=y -CONFIG_SERIAL_AMBA_PL011=y -CONFIG_SERIAL_AMBA_PL011_CONSOLE=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=m -CONFIG_FB=y -CONFIG_FB_ARMCLCD=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_SOUND=y -CONFIG_SND=m -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -CONFIG_SND_ARMAACI=m -CONFIG_EXT4_FS=y -CONFIG_VFAT_FS=m -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_MAGIC_SYSRQ=y diff --git a/board/qemu/arm-versatile/linux-4.4-nommu.config b/board/qemu/arm-versatile/linux-4.4-nommu.config deleted file mode 100644 index e1264dca00..0000000000 --- a/board/qemu/arm-versatile/linux-4.4-nommu.config +++ /dev/null @@ -1,46 +0,0 @@ -# CONFIG_MMU is not set -CONFIG_ARCH_VERSATILE=y -CONFIG_SET_MEM_PARAM=y -CONFIG_DRAM_BASE=0x00000000 -CONFIG_DRAM_SIZE=0x08000000 -CONFIG_ARCH_VERSATILE_PB=y -CONFIG_MACH_VERSATILE_AB=y -# CONFIG_MACH_VERSATILE_DT is not set -CONFIG_BINFMT_FLAT=y -CONFIG_SYSVIPC=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_ARCH_MULTI_V7 is not set -CONFIG_AEABI=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_NETDEVICES=y -CONFIG_SMC91X=y -CONFIG_PHYLIB=y -CONFIG_INPUT_EVDEV=y -CONFIG_SERIO_AMBAKMI=y -CONFIG_LEGACY_PTY_COUNT=16 -CONFIG_SERIAL_8250=m -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_8250_RSA=y -CONFIG_SERIAL_AMBA_PL011=y -CONFIG_SERIAL_AMBA_PL011_CONSOLE=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=m -CONFIG_FB=y -CONFIG_FB_ARMCLCD=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_SOUND=y -CONFIG_SND=m -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -CONFIG_SND_ARMAACI=m -CONFIG_EXT4_FS=y -CONFIG_VFAT_FS=m -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_MAGIC_SYSRQ=y diff --git a/board/qemu/arm-versatile/linux-nommu.config b/board/qemu/arm-versatile/linux-nommu.config new file mode 100644 index 0000000000..1d91d51a14 --- /dev/null +++ b/board/qemu/arm-versatile/linux-nommu.config @@ -0,0 +1,47 @@ +# CONFIG_MMU is not set +CONFIG_ARCH_VERSATILE=y +CONFIG_ARM_SINGLE_ARCH_VERSATILE=y +CONFIG_SET_MEM_PARAM=y +CONFIG_DRAM_BASE=0x00000000 +CONFIG_DRAM_SIZE=0x08000000 +CONFIG_ARCH_VERSATILE_PB=y +CONFIG_MACH_VERSATILE_AB=y +CONFIG_MACH_VERSATILE_DT=y +CONFIG_BINFMT_FLAT=y +CONFIG_SYSVIPC=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_ARCH_MULTI_V7 is not set +CONFIG_AEABI=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_NETDEVICES=y +CONFIG_SMC91X=y +CONFIG_PHYLIB=y +CONFIG_INPUT_EVDEV=y +CONFIG_SERIO_AMBAKMI=y +CONFIG_LEGACY_PTY_COUNT=16 +CONFIG_SERIAL_8250=m +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_RSA=y +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=m +CONFIG_FB=y +CONFIG_FB_ARMCLCD=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_SOUND=y +CONFIG_SND=m +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_ARMAACI=m +CONFIG_EXT4_FS=y +CONFIG_VFAT_FS=m +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_MAGIC_SYSRQ=y diff --git a/board/qemu/arm-versatile/linux.config b/board/qemu/arm-versatile/linux.config new file mode 100644 index 0000000000..b1001d84a7 --- /dev/null +++ b/board/qemu/arm-versatile/linux.config @@ -0,0 +1,43 @@ +CONFIG_SYSVIPC=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_ARCH_MULTI_V7 is not set +CONFIG_ARCH_VERSATILE=y +CONFIG_PCI=y +CONFIG_PCI_VERSATILE=y +CONFIG_AEABI=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_SCSI_SYM53C8XX_2=y +CONFIG_NETDEVICES=y +CONFIG_8139CP=y +CONFIG_PHYLIB=y +CONFIG_INPUT_EVDEV=y +CONFIG_SERIO_AMBAKMI=y +CONFIG_LEGACY_PTY_COUNT=16 +CONFIG_SERIAL_8250=m +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_RSA=y +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=m +CONFIG_FB=y +CONFIG_FB_ARMCLCD=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_SOUND=y +CONFIG_SND=m +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_ARMAACI=m +CONFIG_EXT4_FS=y +CONFIG_VFAT_FS=m +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_MAGIC_SYSRQ=y diff --git a/board/qemu/arm-versatile/patches/linux/versatile-nommu.patch b/board/qemu/arm-versatile/patches/linux/versatile-nommu.patch index 961b6c3dd1..883bd0de6e 100644 --- a/board/qemu/arm-versatile/patches/linux/versatile-nommu.patch +++ b/board/qemu/arm-versatile/patches/linux/versatile-nommu.patch @@ -1,30 +1,84 @@ -From b7c1666813424d329868335c8faf8886b0f85b6c Mon Sep 17 00:00:00 2001 -From: Greg Ungerer -Date: Thu, 11 Aug 2016 21:33:11 +1000 -Subject: [PATCH] arm: fix versatile platform to work in no-MMU mode +Signed-Off-by: Waldemar Brodkorb +From LKML. -If CONFIG_MMU is disabled then do not carry out the virtual memory address -translation for IO devices. - -With this fix in place we can run the ARM Versatile board (including its -qemu emulation) as a no-MMU Linux system. - -Signed-off-by: Greg Ungerer -Signed-off-by: Waldemar Brodkorb - -diff -Nur linux-4.4.17.orig/arch/arm/mach-versatile/include/mach/hardware.h linux-4.4.17/arch/arm/mach-versatile/include/mach/hardware.h ---- linux-4.4.17.orig/arch/arm/mach-versatile/include/mach/hardware.h 2016-08-10 11:49:43.000000000 +0200 -+++ linux-4.4.17/arch/arm/mach-versatile/include/mach/hardware.h 2016-08-25 23:19:03.691716292 +0200 -@@ -30,8 +30,12 @@ - #define VERSATILE_PCI_VIRT_BASE (void __iomem *)0xe8000000ul - #define VERSATILE_PCI_CFG_VIRT_BASE (void __iomem *)0xe9000000ul +diff -Nur linux-4.15.13.orig/arch/arm/Kconfig linux-4.15.13/arch/arm/Kconfig +--- linux-4.15.13.orig/arch/arm/Kconfig 2018-03-24 11:02:53.000000000 +0100 ++++ linux-4.15.13/arch/arm/Kconfig 2018-04-01 03:47:33.415078244 +0100 +@@ -355,6 +355,17 @@ + select SPARSE_IRQ + select USE_OF + ++config ARM_SINGLE_ARCH_VERSATILE ++ bool "ARM Ltd. Versatile family" ++ depends on !MMU ++ select AUTO_ZRELADDR ++ select CLKSRC_OF ++ select COMMON_CLK ++ select GENERIC_CLOCKEVENTS ++ select GPIOLIB ++ select SPARSE_IRQ ++ select USE_OF ++ + config ARCH_EBSA110 + bool "EBSA-110" + select ARCH_USES_GETTIMEOFFSET +diff -Nur linux-4.15.13.orig/arch/arm/Kconfig.debug linux-4.15.13/arch/arm/Kconfig.debug +--- linux-4.15.13.orig/arch/arm/Kconfig.debug 2018-03-24 11:02:53.000000000 +0100 ++++ linux-4.15.13/arch/arm/Kconfig.debug 2018-04-01 03:47:33.416078232 +0100 +@@ -1795,7 +1795,8 @@ + config UNCOMPRESS_INCLUDE + string + default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM || \ +- PLAT_SAMSUNG || ARM_SINGLE_ARMV7M ++ PLAT_SAMSUNG || ARM_SINGLE_ARMV7M || \ ++ ARM_SINGLE_ARCH_VERSATILE + default "mach/uncompress.h" + + config EARLY_PRINTK +diff -Nur linux-4.15.13.orig/arch/arm/include/asm/mach/map.h linux-4.15.13/arch/arm/include/asm/mach/map.h +--- linux-4.15.13.orig/arch/arm/include/asm/mach/map.h 2018-03-24 11:02:53.000000000 +0100 ++++ linux-4.15.13/arch/arm/include/asm/mach/map.h 2018-04-01 03:47:17.587276119 +0100 +@@ -62,6 +62,7 @@ + #else + #define iotable_init(map,num) do { } while (0) + #define vm_reserve_area_early(a,s,c) do { } while (0) ++#define debug_ll_io_init() do { } while (0) + #endif + + #endif +diff -Nur linux-4.15.13.orig/arch/arm/mach-versatile/Kconfig linux-4.15.13/arch/arm/mach-versatile/Kconfig +--- linux-4.15.13.orig/arch/arm/mach-versatile/Kconfig 2018-03-24 11:02:53.000000000 +0100 ++++ linux-4.15.13/arch/arm/mach-versatile/Kconfig 2018-04-01 03:47:33.417078219 +0100 +@@ -1,7 +1,8 @@ + # SPDX-License-Identifier: GPL-2.0 + config ARCH_VERSATILE +- bool "ARM Ltd. Versatile family" +- depends on ARCH_MULTI_V5 ++ bool "ARM Ltd. Versatile family" if ARCH_MULTI_V5 ++ depends on ARCH_MULTI_V5 || ARM_SINGLE_ARCH_VERSATILE ++ default y if ARM_SINGLE_ARCH_VERSATILE + select ARM_AMBA + select ARM_TIMER_SP804 + select ARM_VIC +diff -Nur linux-4.15.13.orig/arch/arm/mach-versatile/Makefile.boot linux-4.15.13/arch/arm/mach-versatile/Makefile.boot +--- linux-4.15.13.orig/arch/arm/mach-versatile/Makefile.boot 1970-01-01 01:00:00.000000000 +0100 ++++ linux-4.15.13/arch/arm/mach-versatile/Makefile.boot 2018-04-01 03:47:25.644175394 +0100 +@@ -0,0 +1,3 @@ ++# Empty file waiting for deletion once Makefile.boot isn't needed any more. ++# Patch waits for application at ++# http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=7889/1 . +diff -Nur linux-4.15.13.orig/arch/arm/mach-versatile/versatile_dt.c linux-4.15.13/arch/arm/mach-versatile/versatile_dt.c +--- linux-4.15.13.orig/arch/arm/mach-versatile/versatile_dt.c 2018-03-24 11:02:53.000000000 +0100 ++++ linux-4.15.13/arch/arm/mach-versatile/versatile_dt.c 2018-04-01 03:47:10.913359555 +0100 +@@ -37,7 +37,11 @@ + #include -+#ifdef CONFIG_MMU /* macro to get at MMIO space when running virtually */ ++#ifdef CONFIG_MMU #define IO_ADDRESS(x) (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000) +#else +#define IO_ADDRESS(x) (x) +#endif - #define __io_address(n) ((void __iomem __force *)IO_ADDRESS(n)) + /* diff --git a/board/qemu/arm-versatile/readme.txt b/board/qemu/arm-versatile/readme.txt index 6e899f4b5f..33cdb7b81e 100644 --- a/board/qemu/arm-versatile/readme.txt +++ b/board/qemu/arm-versatile/readme.txt @@ -4,9 +4,9 @@ Run the emulation with: Or for the noMMU emulation: - qemu-system-arm -M versatilepb -kernel output/images/zImage -append "console=ttyAMA0,115200" -serial stdio -net user -net nic,model=smc91c111 + qemu-system-arm -M versatilepb -kernel output/images/zImage -dtb output/images/versatile-pb.dtb -append "console=ttyAMA0,115200" -serial stdio -net user -net nic,model=smc91c111 The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. -Tested with QEMU 2.9.0 +Tested with QEMU 2.12.0 diff --git a/board/qemu/arm-vexpress/readme.txt b/board/qemu/arm-vexpress/readme.txt index 57bb814198..35137e050c 100644 --- a/board/qemu/arm-vexpress/readme.txt +++ b/board/qemu/arm-vexpress/readme.txt @@ -8,4 +8,4 @@ graphical window is the framebuffer. If you want to emulate more cores change "-smp 1" to "-smp 2" for dual-core or even "smp -4" for a quad-core configuration. -Tested with QEMU 2.9.0 +Tested with QEMU 2.12.0 diff --git a/board/qemu/m68k-mcf5208/linux-4.11.config b/board/qemu/m68k-mcf5208/linux-4.11.config deleted file mode 100644 index 09a89d7255..0000000000 --- a/board/qemu/m68k-mcf5208/linux-4.11.config +++ /dev/null @@ -1,28 +0,0 @@ -CONFIG_M68K=y -CONFIG_COLDFIRE=y -# CONFIG_MMU is not set -CONFIG_M520x=y -CONFIG_CLOCK_SET=y -CONFIG_CLOCK_FREQ=66666666 -CONFIG_CLOCK_DIV=1 -CONFIG_M5208EVB=y -CONFIG_FREESCALE=y -CONFIG_RAMBASE=0x40000000 -CONFIG_RAMSIZE=0x0 -CONFIG_VECTORBASE=0x40000000 -CONFIG_KERNELBASE=0x40020000 -CONFIG_4KSTACKS=y -CONFIG_RAMKERNEL=y -CONFIG_BINFMT_FLAT=y -CONFIG_SERIAL_MCF=y -CONFIG_SERIAL_MCF_BAUDRATE=115200 -CONFIG_SERIAL_MCF_CONSOLE=y -CONFIG_BOOTPARAM=y -CONFIG_BOOTPARAM_STRING="console=ttyS0,115200" -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_NETDEVICES=y -CONFIG_NET_VENDOR_FREESCALE=y -CONFIG_FEC=y diff --git a/board/qemu/m68k-mcf5208/linux.config b/board/qemu/m68k-mcf5208/linux.config new file mode 100644 index 0000000000..09a89d7255 --- /dev/null +++ b/board/qemu/m68k-mcf5208/linux.config @@ -0,0 +1,28 @@ +CONFIG_M68K=y +CONFIG_COLDFIRE=y +# CONFIG_MMU is not set +CONFIG_M520x=y +CONFIG_CLOCK_SET=y +CONFIG_CLOCK_FREQ=66666666 +CONFIG_CLOCK_DIV=1 +CONFIG_M5208EVB=y +CONFIG_FREESCALE=y +CONFIG_RAMBASE=0x40000000 +CONFIG_RAMSIZE=0x0 +CONFIG_VECTORBASE=0x40000000 +CONFIG_KERNELBASE=0x40020000 +CONFIG_4KSTACKS=y +CONFIG_RAMKERNEL=y +CONFIG_BINFMT_FLAT=y +CONFIG_SERIAL_MCF=y +CONFIG_SERIAL_MCF_BAUDRATE=115200 +CONFIG_SERIAL_MCF_CONSOLE=y +CONFIG_BOOTPARAM=y +CONFIG_BOOTPARAM_STRING="console=ttyS0,115200" +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_NETDEVICES=y +CONFIG_NET_VENDOR_FREESCALE=y +CONFIG_FEC=y diff --git a/board/qemu/m68k-mcf5208/readme.txt b/board/qemu/m68k-mcf5208/readme.txt index 014a0dc09f..d1c9086805 100644 --- a/board/qemu/m68k-mcf5208/readme.txt +++ b/board/qemu/m68k-mcf5208/readme.txt @@ -4,4 +4,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. -Tested with QEMU 2.9.0 +Tested with QEMU 2.12.0 diff --git a/board/qemu/m68k-q800/linux-4.11.config b/board/qemu/m68k-q800/linux-4.11.config deleted file mode 100644 index 44eb70e2d7..0000000000 --- a/board/qemu/m68k-q800/linux-4.11.config +++ /dev/null @@ -1,26 +0,0 @@ -CONFIG_M68K=y -CONFIG_M68040=y -CONFIG_M68KFPU_EMU=y -CONFIG_MAC=y -CONFIG_MACINTOSH_DRIVERS=y -CONFIG_ADB=y -CONFIG_ADB_MACII=y -CONFIG_TTY=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_NETDEVICES=y -CONFIG_MACSONIC=y -CONFIG_SCSI=y -CONFIG_SCSI_DMA=y -CONFIG_SCSI_LOWLEVEL=y -CONFIG_SCSI_MAC_ESP=y -CONFIG_BLK_DEV_SD=y -CONFIG_SERIAL_PMACZILOG=y -CONFIG_SERIAL_PMACZILOG_TTYS=y -CONFIG_SERIAL_PMACZILOG_CONSOLE=y -CONFIG_EXT4_FS=y -CONFIG_TMPFS=y diff --git a/board/qemu/m68k-q800/linux.config b/board/qemu/m68k-q800/linux.config new file mode 100644 index 0000000000..44eb70e2d7 --- /dev/null +++ b/board/qemu/m68k-q800/linux.config @@ -0,0 +1,26 @@ +CONFIG_M68K=y +CONFIG_M68040=y +CONFIG_M68KFPU_EMU=y +CONFIG_MAC=y +CONFIG_MACINTOSH_DRIVERS=y +CONFIG_ADB=y +CONFIG_ADB_MACII=y +CONFIG_TTY=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_NETDEVICES=y +CONFIG_MACSONIC=y +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +CONFIG_SCSI_LOWLEVEL=y +CONFIG_SCSI_MAC_ESP=y +CONFIG_BLK_DEV_SD=y +CONFIG_SERIAL_PMACZILOG=y +CONFIG_SERIAL_PMACZILOG_TTYS=y +CONFIG_SERIAL_PMACZILOG_CONSOLE=y +CONFIG_EXT4_FS=y +CONFIG_TMPFS=y diff --git a/board/qemu/m68k-q800/readme.txt b/board/qemu/m68k-q800/readme.txt index 78267a318f..bead8cdde2 100644 --- a/board/qemu/m68k-q800/readme.txt +++ b/board/qemu/m68k-q800/readme.txt @@ -4,5 +4,5 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. -Tested with QEMU 2.4.0 from https://github.com/vivier/qemu-m68k -You need following branch: q800-v2.4.0 +Tested with QEMU 2.11.0 from https://github.com/vivier/qemu-m68k +You need following branch: q800-v2.11.0 diff --git a/board/qemu/microblazebe-mmu/linux-4.11.config b/board/qemu/microblazebe-mmu/linux-4.11.config deleted file mode 100644 index 7bcd382060..0000000000 --- a/board/qemu/microblazebe-mmu/linux-4.11.config +++ /dev/null @@ -1,20 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_OPT_LIB_ASM=y -CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan3adsp" -CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1 -CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1 -CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1 -CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1 -CONFIG_MMU=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_NETDEVICES=y -CONFIG_XILINX_EMACLITE=y -CONFIG_SERIAL_UARTLITE=y -CONFIG_SERIAL_UARTLITE_CONSOLE=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_TMPFS=y diff --git a/board/qemu/microblazebe-mmu/linux.config b/board/qemu/microblazebe-mmu/linux.config new file mode 100644 index 0000000000..7bcd382060 --- /dev/null +++ b/board/qemu/microblazebe-mmu/linux.config @@ -0,0 +1,20 @@ +CONFIG_SYSVIPC=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_OPT_LIB_ASM=y +CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan3adsp" +CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1 +CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1 +CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1 +CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1 +CONFIG_MMU=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_NETDEVICES=y +CONFIG_XILINX_EMACLITE=y +CONFIG_SERIAL_UARTLITE=y +CONFIG_SERIAL_UARTLITE_CONSOLE=y +# CONFIG_VGA_CONSOLE is not set +CONFIG_TMPFS=y diff --git a/board/qemu/microblazebe-mmu/readme.txt b/board/qemu/microblazebe-mmu/readme.txt index cf0afdaff8..4f52baff1f 100644 --- a/board/qemu/microblazebe-mmu/readme.txt +++ b/board/qemu/microblazebe-mmu/readme.txt @@ -4,4 +4,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. -Tested with QEMU 2.9.0 +Tested with QEMU 2.12.0 diff --git a/board/qemu/microblazeel-mmu/linux-4.11.config b/board/qemu/microblazeel-mmu/linux-4.11.config deleted file mode 100644 index a6228280bd..0000000000 --- a/board/qemu/microblazeel-mmu/linux-4.11.config +++ /dev/null @@ -1,19 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan3adsp" -CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1 -CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1 -CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1 -CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1 -CONFIG_MMU=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_NETDEVICES=y -CONFIG_XILINX_EMACLITE=y -CONFIG_SERIAL_UARTLITE=y -CONFIG_SERIAL_UARTLITE_CONSOLE=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_TMPFS=y diff --git a/board/qemu/microblazeel-mmu/linux.config b/board/qemu/microblazeel-mmu/linux.config new file mode 100644 index 0000000000..a6228280bd --- /dev/null +++ b/board/qemu/microblazeel-mmu/linux.config @@ -0,0 +1,19 @@ +CONFIG_SYSVIPC=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan3adsp" +CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1 +CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1 +CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1 +CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1 +CONFIG_MMU=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_NETDEVICES=y +CONFIG_XILINX_EMACLITE=y +CONFIG_SERIAL_UARTLITE=y +CONFIG_SERIAL_UARTLITE_CONSOLE=y +# CONFIG_VGA_CONSOLE is not set +CONFIG_TMPFS=y diff --git a/board/qemu/microblazeel-mmu/readme.txt b/board/qemu/microblazeel-mmu/readme.txt index 9edf101afd..0b0f330a5e 100644 --- a/board/qemu/microblazeel-mmu/readme.txt +++ b/board/qemu/microblazeel-mmu/readme.txt @@ -4,4 +4,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. -Tested with QEMU 2.9.0 +Tested with QEMU 2.12.0 diff --git a/board/qemu/mips32r2-malta/linux-4.11.config b/board/qemu/mips32r2-malta/linux-4.11.config deleted file mode 100644 index 3a26ac830f..0000000000 --- a/board/qemu/mips32r2-malta/linux-4.11.config +++ /dev/null @@ -1,30 +0,0 @@ -CONFIG_MIPS_MALTA=y -CONFIG_CPU_MIPS32_R2=y -CONFIG_MIPS_MT_SMP=y -CONFIG_NR_CPUS=2 -CONFIG_SYSVIPC=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_PCI=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECD=y -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_NETDEVICES=y -CONFIG_PCNET32=y -CONFIG_INPUT_EVDEV=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_FB=y -CONFIG_FB_CIRRUS=y -CONFIG_USB=y -CONFIG_USB_UHCI_HCD=y -CONFIG_EXT4_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/mips32r2-malta/linux.config b/board/qemu/mips32r2-malta/linux.config new file mode 100644 index 0000000000..3a26ac830f --- /dev/null +++ b/board/qemu/mips32r2-malta/linux.config @@ -0,0 +1,30 @@ +CONFIG_MIPS_MALTA=y +CONFIG_CPU_MIPS32_R2=y +CONFIG_MIPS_MT_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_SYSVIPC=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_PCI=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IDE=y +CONFIG_BLK_DEV_IDECD=y +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_GENERIC=y +CONFIG_BLK_DEV_PIIX=y +CONFIG_NETDEVICES=y +CONFIG_PCNET32=y +CONFIG_INPUT_EVDEV=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_FB=y +CONFIG_FB_CIRRUS=y +CONFIG_USB=y +CONFIG_USB_UHCI_HCD=y +CONFIG_EXT4_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/mips32r2-malta/readme.txt b/board/qemu/mips32r2-malta/readme.txt index 7002ab1d86..d1bbcc4749 100644 --- a/board/qemu/mips32r2-malta/readme.txt +++ b/board/qemu/mips32r2-malta/readme.txt @@ -6,4 +6,4 @@ The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. No keyboard support has been enabled. -Tested with QEMU 2.9.0 +Tested with QEMU 2.12.0 diff --git a/board/qemu/mips32r2el-malta/linux-4.11.config b/board/qemu/mips32r2el-malta/linux-4.11.config deleted file mode 100644 index 79d7352474..0000000000 --- a/board/qemu/mips32r2el-malta/linux-4.11.config +++ /dev/null @@ -1,31 +0,0 @@ -CONFIG_MIPS_MALTA=y -CONFIG_CPU_LITTLE_ENDIAN=y -CONFIG_CPU_MIPS32_R2=y -CONFIG_MIPS_MT_SMP=y -CONFIG_NR_CPUS=2 -CONFIG_SYSVIPC=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_PCI=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECD=y -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_NETDEVICES=y -CONFIG_PCNET32=y -CONFIG_INPUT_EVDEV=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_FB=y -CONFIG_FB_CIRRUS=y -CONFIG_USB=y -CONFIG_USB_UHCI_HCD=y -CONFIG_EXT4_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/mips32r2el-malta/linux.config b/board/qemu/mips32r2el-malta/linux.config new file mode 100644 index 0000000000..79d7352474 --- /dev/null +++ b/board/qemu/mips32r2el-malta/linux.config @@ -0,0 +1,31 @@ +CONFIG_MIPS_MALTA=y +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_CPU_MIPS32_R2=y +CONFIG_MIPS_MT_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_SYSVIPC=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_PCI=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IDE=y +CONFIG_BLK_DEV_IDECD=y +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_GENERIC=y +CONFIG_BLK_DEV_PIIX=y +CONFIG_NETDEVICES=y +CONFIG_PCNET32=y +CONFIG_INPUT_EVDEV=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_FB=y +CONFIG_FB_CIRRUS=y +CONFIG_USB=y +CONFIG_USB_UHCI_HCD=y +CONFIG_EXT4_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/mips32r2el-malta/readme.txt b/board/qemu/mips32r2el-malta/readme.txt index bfc9c49d5a..4f59d34308 100644 --- a/board/qemu/mips32r2el-malta/readme.txt +++ b/board/qemu/mips32r2el-malta/readme.txt @@ -6,4 +6,4 @@ The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. No keyboard support has been enabled. -Tested with QEMU 2.9.0 +Tested with QEMU 2.12.0 diff --git a/board/qemu/mips32r6-malta/linux-4.11.config b/board/qemu/mips32r6-malta/linux-4.11.config deleted file mode 100644 index d559676615..0000000000 --- a/board/qemu/mips32r6-malta/linux-4.11.config +++ /dev/null @@ -1,30 +0,0 @@ -CONFIG_MIPS_MALTA=y -CONFIG_CPU_MIPS32_R6=y -CONFIG_MIPS_MT_SMP=y -CONFIG_NR_CPUS=2 -CONFIG_SYSVIPC=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_PCI=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECD=y -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_NETDEVICES=y -CONFIG_PCNET32=y -CONFIG_INPUT_EVDEV=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_FB=y -CONFIG_FB_CIRRUS=y -CONFIG_USB=y -CONFIG_USB_UHCI_HCD=y -CONFIG_EXT4_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/mips32r6-malta/linux.config b/board/qemu/mips32r6-malta/linux.config new file mode 100644 index 0000000000..d559676615 --- /dev/null +++ b/board/qemu/mips32r6-malta/linux.config @@ -0,0 +1,30 @@ +CONFIG_MIPS_MALTA=y +CONFIG_CPU_MIPS32_R6=y +CONFIG_MIPS_MT_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_SYSVIPC=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_PCI=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IDE=y +CONFIG_BLK_DEV_IDECD=y +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_GENERIC=y +CONFIG_BLK_DEV_PIIX=y +CONFIG_NETDEVICES=y +CONFIG_PCNET32=y +CONFIG_INPUT_EVDEV=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_FB=y +CONFIG_FB_CIRRUS=y +CONFIG_USB=y +CONFIG_USB_UHCI_HCD=y +CONFIG_EXT4_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/mips32r6-malta/readme.txt b/board/qemu/mips32r6-malta/readme.txt index 7d79c6602c..04de7e5c3e 100644 --- a/board/qemu/mips32r6-malta/readme.txt +++ b/board/qemu/mips32r6-malta/readme.txt @@ -4,4 +4,4 @@ qemu-system-mips -M malta -cpu mips32r6-generic -kernel output/images/vmlinux -d The login prompt will appear in the terminal that started Qemu. -Tested with QEMU 2.9.0 +Tested with QEMU 2.12.0 diff --git a/board/qemu/mips32r6el-malta/linux-4.11.config b/board/qemu/mips32r6el-malta/linux-4.11.config deleted file mode 100644 index d559676615..0000000000 --- a/board/qemu/mips32r6el-malta/linux-4.11.config +++ /dev/null @@ -1,30 +0,0 @@ -CONFIG_MIPS_MALTA=y -CONFIG_CPU_MIPS32_R6=y -CONFIG_MIPS_MT_SMP=y -CONFIG_NR_CPUS=2 -CONFIG_SYSVIPC=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_PCI=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECD=y -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_NETDEVICES=y -CONFIG_PCNET32=y -CONFIG_INPUT_EVDEV=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_FB=y -CONFIG_FB_CIRRUS=y -CONFIG_USB=y -CONFIG_USB_UHCI_HCD=y -CONFIG_EXT4_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/mips32r6el-malta/linux.config b/board/qemu/mips32r6el-malta/linux.config new file mode 100644 index 0000000000..d559676615 --- /dev/null +++ b/board/qemu/mips32r6el-malta/linux.config @@ -0,0 +1,30 @@ +CONFIG_MIPS_MALTA=y +CONFIG_CPU_MIPS32_R6=y +CONFIG_MIPS_MT_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_SYSVIPC=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_PCI=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IDE=y +CONFIG_BLK_DEV_IDECD=y +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_GENERIC=y +CONFIG_BLK_DEV_PIIX=y +CONFIG_NETDEVICES=y +CONFIG_PCNET32=y +CONFIG_INPUT_EVDEV=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_FB=y +CONFIG_FB_CIRRUS=y +CONFIG_USB=y +CONFIG_USB_UHCI_HCD=y +CONFIG_EXT4_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/mips32r6el-malta/readme.txt b/board/qemu/mips32r6el-malta/readme.txt index 78f8350506..88602de0bb 100644 --- a/board/qemu/mips32r6el-malta/readme.txt +++ b/board/qemu/mips32r6el-malta/readme.txt @@ -4,4 +4,4 @@ qemu-system-mipsel -M malta -cpu mips32r6-generic -kernel output/images/vmlinux The login prompt will appear in the terminal that started Qemu. -Tested with QEMU 2.9.0 +Tested with QEMU 2.12.0 diff --git a/board/qemu/mips64-malta/linux-4.11.config b/board/qemu/mips64-malta/linux-4.11.config deleted file mode 100644 index cd0b560634..0000000000 --- a/board/qemu/mips64-malta/linux-4.11.config +++ /dev/null @@ -1,34 +0,0 @@ -CONFIG_MIPS_MALTA=y -CONFIG_CPU_MIPS64_R1=y -CONFIG_64BIT=y -CONFIG_MIPS_MT_SMP=y -CONFIG_NR_CPUS=2 -CONFIG_SYSVIPC=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_PCI=y -CONFIG_MIPS32_COMPAT=y -CONFIG_MIPS32_O32=y -CONFIG_MIPS32_N32=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECD=y -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_NETDEVICES=y -CONFIG_PCNET32=y -CONFIG_INPUT_EVDEV=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_FB=y -CONFIG_FB_CIRRUS=y -CONFIG_USB=y -CONFIG_USB_UHCI_HCD=y -CONFIG_EXT4_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/mips64-malta/linux.config b/board/qemu/mips64-malta/linux.config new file mode 100644 index 0000000000..cd0b560634 --- /dev/null +++ b/board/qemu/mips64-malta/linux.config @@ -0,0 +1,34 @@ +CONFIG_MIPS_MALTA=y +CONFIG_CPU_MIPS64_R1=y +CONFIG_64BIT=y +CONFIG_MIPS_MT_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_SYSVIPC=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_PCI=y +CONFIG_MIPS32_COMPAT=y +CONFIG_MIPS32_O32=y +CONFIG_MIPS32_N32=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IDE=y +CONFIG_BLK_DEV_IDECD=y +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_GENERIC=y +CONFIG_BLK_DEV_PIIX=y +CONFIG_NETDEVICES=y +CONFIG_PCNET32=y +CONFIG_INPUT_EVDEV=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_FB=y +CONFIG_FB_CIRRUS=y +CONFIG_USB=y +CONFIG_USB_UHCI_HCD=y +CONFIG_EXT4_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/mips64-malta/readme.txt b/board/qemu/mips64-malta/readme.txt index 8a732101a8..f0e7fef795 100644 --- a/board/qemu/mips64-malta/readme.txt +++ b/board/qemu/mips64-malta/readme.txt @@ -5,4 +5,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. -Tested with QEMU 2.9.0 +Tested with QEMU 2.12.0 diff --git a/board/qemu/mips64el-malta/linux-4.11.config b/board/qemu/mips64el-malta/linux-4.11.config deleted file mode 100644 index c6b46d4d7f..0000000000 --- a/board/qemu/mips64el-malta/linux-4.11.config +++ /dev/null @@ -1,35 +0,0 @@ -CONFIG_MIPS_MALTA=y -CONFIG_CPU_LITTLE_ENDIAN=y -CONFIG_CPU_MIPS64_R1=y -CONFIG_64BIT=y -CONFIG_MIPS_MT_SMP=y -CONFIG_NR_CPUS=2 -CONFIG_SYSVIPC=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_PCI=y -CONFIG_MIPS32_COMPAT=y -CONFIG_MIPS32_O32=y -CONFIG_MIPS32_N32=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECD=y -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_NETDEVICES=y -CONFIG_PCNET32=y -CONFIG_INPUT_EVDEV=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_FB=y -CONFIG_FB_CIRRUS=y -CONFIG_USB=y -CONFIG_USB_UHCI_HCD=y -CONFIG_EXT4_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/mips64el-malta/linux.config b/board/qemu/mips64el-malta/linux.config new file mode 100644 index 0000000000..c6b46d4d7f --- /dev/null +++ b/board/qemu/mips64el-malta/linux.config @@ -0,0 +1,35 @@ +CONFIG_MIPS_MALTA=y +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_CPU_MIPS64_R1=y +CONFIG_64BIT=y +CONFIG_MIPS_MT_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_SYSVIPC=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_PCI=y +CONFIG_MIPS32_COMPAT=y +CONFIG_MIPS32_O32=y +CONFIG_MIPS32_N32=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IDE=y +CONFIG_BLK_DEV_IDECD=y +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_GENERIC=y +CONFIG_BLK_DEV_PIIX=y +CONFIG_NETDEVICES=y +CONFIG_PCNET32=y +CONFIG_INPUT_EVDEV=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_FB=y +CONFIG_FB_CIRRUS=y +CONFIG_USB=y +CONFIG_USB_UHCI_HCD=y +CONFIG_EXT4_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/mips64el-malta/readme.txt b/board/qemu/mips64el-malta/readme.txt index 25fc9ee172..03b149bc8f 100644 --- a/board/qemu/mips64el-malta/readme.txt +++ b/board/qemu/mips64el-malta/readme.txt @@ -5,4 +5,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. -Tested with QEMU 2.5.0 +Tested with QEMU 2.12.0 diff --git a/board/qemu/mips64r6-malta/linux-4.11.config b/board/qemu/mips64r6-malta/linux-4.11.config deleted file mode 100644 index 0ebfdbdb05..0000000000 --- a/board/qemu/mips64r6-malta/linux-4.11.config +++ /dev/null @@ -1,34 +0,0 @@ -CONFIG_MIPS_MALTA=y -CONFIG_CPU_MIPS64_R6=y -CONFIG_64BIT=y -CONFIG_MIPS_MT_SMP=y -CONFIG_NR_CPUS=2 -CONFIG_SYSVIPC=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_PCI=y -CONFIG_MIPS32_COMPAT=y -CONFIG_MIPS32_O32=y -CONFIG_MIPS32_N32=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECD=y -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_NETDEVICES=y -CONFIG_PCNET32=y -CONFIG_INPUT_EVDEV=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_FB=y -CONFIG_FB_CIRRUS=y -CONFIG_USB=y -CONFIG_USB_UHCI_HCD=y -CONFIG_EXT4_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/mips64r6-malta/linux.config b/board/qemu/mips64r6-malta/linux.config new file mode 100644 index 0000000000..0ebfdbdb05 --- /dev/null +++ b/board/qemu/mips64r6-malta/linux.config @@ -0,0 +1,34 @@ +CONFIG_MIPS_MALTA=y +CONFIG_CPU_MIPS64_R6=y +CONFIG_64BIT=y +CONFIG_MIPS_MT_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_SYSVIPC=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_PCI=y +CONFIG_MIPS32_COMPAT=y +CONFIG_MIPS32_O32=y +CONFIG_MIPS32_N32=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IDE=y +CONFIG_BLK_DEV_IDECD=y +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_GENERIC=y +CONFIG_BLK_DEV_PIIX=y +CONFIG_NETDEVICES=y +CONFIG_PCNET32=y +CONFIG_INPUT_EVDEV=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_FB=y +CONFIG_FB_CIRRUS=y +CONFIG_USB=y +CONFIG_USB_UHCI_HCD=y +CONFIG_EXT4_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/mips64r6-malta/readme.txt b/board/qemu/mips64r6-malta/readme.txt index 4a6c5fe798..bf5b517a32 100644 --- a/board/qemu/mips64r6-malta/readme.txt +++ b/board/qemu/mips64r6-malta/readme.txt @@ -4,7 +4,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. -Tested with QEMU 2.7.0 - -Might work with 2.6.0 by changing the -cpu entry to MIPS64R6-generic -since the naming was updated and the old name removed in 2.7.0 +Tested with QEMU 2.12.0 diff --git a/board/qemu/mips64r6el-malta/linux-4.11.config b/board/qemu/mips64r6el-malta/linux-4.11.config deleted file mode 100644 index 0ebfdbdb05..0000000000 --- a/board/qemu/mips64r6el-malta/linux-4.11.config +++ /dev/null @@ -1,34 +0,0 @@ -CONFIG_MIPS_MALTA=y -CONFIG_CPU_MIPS64_R6=y -CONFIG_64BIT=y -CONFIG_MIPS_MT_SMP=y -CONFIG_NR_CPUS=2 -CONFIG_SYSVIPC=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_PCI=y -CONFIG_MIPS32_COMPAT=y -CONFIG_MIPS32_O32=y -CONFIG_MIPS32_N32=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECD=y -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_NETDEVICES=y -CONFIG_PCNET32=y -CONFIG_INPUT_EVDEV=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_FB=y -CONFIG_FB_CIRRUS=y -CONFIG_USB=y -CONFIG_USB_UHCI_HCD=y -CONFIG_EXT4_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/mips64r6el-malta/linux.config b/board/qemu/mips64r6el-malta/linux.config new file mode 100644 index 0000000000..0ebfdbdb05 --- /dev/null +++ b/board/qemu/mips64r6el-malta/linux.config @@ -0,0 +1,34 @@ +CONFIG_MIPS_MALTA=y +CONFIG_CPU_MIPS64_R6=y +CONFIG_64BIT=y +CONFIG_MIPS_MT_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_SYSVIPC=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_PCI=y +CONFIG_MIPS32_COMPAT=y +CONFIG_MIPS32_O32=y +CONFIG_MIPS32_N32=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IDE=y +CONFIG_BLK_DEV_IDECD=y +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_GENERIC=y +CONFIG_BLK_DEV_PIIX=y +CONFIG_NETDEVICES=y +CONFIG_PCNET32=y +CONFIG_INPUT_EVDEV=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_FB=y +CONFIG_FB_CIRRUS=y +CONFIG_USB=y +CONFIG_USB_UHCI_HCD=y +CONFIG_EXT4_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/mips64r6el-malta/readme.txt b/board/qemu/mips64r6el-malta/readme.txt index 9250cf3791..d51bffd08a 100644 --- a/board/qemu/mips64r6el-malta/readme.txt +++ b/board/qemu/mips64r6el-malta/readme.txt @@ -4,4 +4,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. -Tested with QEMU 2.9.0 +Tested with QEMU 2.12.0 diff --git a/board/qemu/nios2-10m50/linux-4.11.fragment b/board/qemu/nios2-10m50/linux-4.11.fragment deleted file mode 100644 index 76c864f5c3..0000000000 --- a/board/qemu/nios2-10m50/linux-4.11.fragment +++ /dev/null @@ -1,3 +0,0 @@ -# Embed the DTB in the kernel image -CONFIG_NIOS2_DTB_SOURCE_BOOL=y -CONFIG_NIOS2_DTB_SOURCE="arch/nios2/boot/dts/10m50_devboard.dts" diff --git a/board/qemu/nios2-10m50/linux.fragment b/board/qemu/nios2-10m50/linux.fragment new file mode 100644 index 0000000000..76c864f5c3 --- /dev/null +++ b/board/qemu/nios2-10m50/linux.fragment @@ -0,0 +1,3 @@ +# Embed the DTB in the kernel image +CONFIG_NIOS2_DTB_SOURCE_BOOL=y +CONFIG_NIOS2_DTB_SOURCE="arch/nios2/boot/dts/10m50_devboard.dts" diff --git a/board/qemu/nios2-10m50/readme.txt b/board/qemu/nios2-10m50/readme.txt index f7dee370f7..44cbcb08a2 100644 --- a/board/qemu/nios2-10m50/readme.txt +++ b/board/qemu/nios2-10m50/readme.txt @@ -4,4 +4,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. -Tested with QEMU 2.9.0. +Tested with QEMU 2.12.0. diff --git a/board/qemu/or1k/readme.txt b/board/qemu/or1k/readme.txt index a04314e750..df6b467e82 100644 --- a/board/qemu/or1k/readme.txt +++ b/board/qemu/or1k/readme.txt @@ -6,4 +6,4 @@ The login prompt will appear in the terminal that started Qemu. Ethernet support is not working, yet. -Tested with QEMU 2.9.0. +Tested with QEMU 2.12.0. diff --git a/board/qemu/ppc-g3beige/linux-4.11.config b/board/qemu/ppc-g3beige/linux-4.11.config deleted file mode 100644 index 7994553544..0000000000 --- a/board/qemu/ppc-g3beige/linux-4.11.config +++ /dev/null @@ -1,25 +0,0 @@ -CONFIG_ALTIVEC=y -CONFIG_SYSVIPC=y -CONFIG_HIGHMEM=y -CONFIG_YENTA=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_CMD64X=y -CONFIG_BLK_DEV_IDE_PMAC=y -CONFIG_ADB=y -CONFIG_ADB_CUDA=y -CONFIG_ADB_PMU=y -CONFIG_NETDEVICES=y -CONFIG_PCNET32=y -CONFIG_8139CP=y -CONFIG_SERIAL_PMACZILOG=y -CONFIG_SERIAL_PMACZILOG_TTYS=y -CONFIG_SERIAL_PMACZILOG_CONSOLE=y -CONFIG_EXT4_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_BOOTX_TEXT=y diff --git a/board/qemu/ppc-g3beige/linux.config b/board/qemu/ppc-g3beige/linux.config new file mode 100644 index 0000000000..7994553544 --- /dev/null +++ b/board/qemu/ppc-g3beige/linux.config @@ -0,0 +1,25 @@ +CONFIG_ALTIVEC=y +CONFIG_SYSVIPC=y +CONFIG_HIGHMEM=y +CONFIG_YENTA=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IDE=y +CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_CMD64X=y +CONFIG_BLK_DEV_IDE_PMAC=y +CONFIG_ADB=y +CONFIG_ADB_CUDA=y +CONFIG_ADB_PMU=y +CONFIG_NETDEVICES=y +CONFIG_PCNET32=y +CONFIG_8139CP=y +CONFIG_SERIAL_PMACZILOG=y +CONFIG_SERIAL_PMACZILOG_TTYS=y +CONFIG_SERIAL_PMACZILOG_CONSOLE=y +CONFIG_EXT4_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_BOOTX_TEXT=y diff --git a/board/qemu/ppc-g3beige/readme.txt b/board/qemu/ppc-g3beige/readme.txt index 42c97a0c14..1c3b515396 100644 --- a/board/qemu/ppc-g3beige/readme.txt +++ b/board/qemu/ppc-g3beige/readme.txt @@ -5,4 +5,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. -Tested with QEMU 2.9.0 +Tested with QEMU 2.12.0 diff --git a/board/qemu/ppc-mpc8544ds/linux-4.11.config b/board/qemu/ppc-mpc8544ds/linux-4.11.config deleted file mode 100644 index b36847c93d..0000000000 --- a/board/qemu/ppc-mpc8544ds/linux-4.11.config +++ /dev/null @@ -1,38 +0,0 @@ -CONFIG_PPC_85xx=y -CONFIG_PHYS_64BIT=y -CONFIG_SYSVIPC=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="${BR_BINARIES_DIR}/rootfs.cpio" -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MPC8540_ADS=y -CONFIG_MPC85xx_DS=y -CONFIG_HIGHMEM=y -CONFIG_MATH_EMULATION=y -CONFIG_PCI=y -CONFIG_PCIEPORTBUS=y -CONFIG_PCI_MSI=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -CONFIG_NETDEVICES=y -CONFIG_E1000=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=6 -CONFIG_SERIAL_8250_RUNTIME_UARTS=6 -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_DETECT_IRQ=y -CONFIG_SERIAL_8250_RSA=y -CONFIG_USB=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_FSL=y -CONFIG_USB_OHCI_HCD=y -CONFIG_TMPFS=y diff --git a/board/qemu/ppc-mpc8544ds/linux.config b/board/qemu/ppc-mpc8544ds/linux.config new file mode 100644 index 0000000000..b36847c93d --- /dev/null +++ b/board/qemu/ppc-mpc8544ds/linux.config @@ -0,0 +1,38 @@ +CONFIG_PPC_85xx=y +CONFIG_PHYS_64BIT=y +CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="${BR_BINARIES_DIR}/rootfs.cpio" +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MPC8540_ADS=y +CONFIG_MPC85xx_DS=y +CONFIG_HIGHMEM=y +CONFIG_MATH_EMULATION=y +CONFIG_PCI=y +CONFIG_PCIEPORTBUS=y +CONFIG_PCI_MSI=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_NETDEVICES=y +CONFIG_E1000=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=6 +CONFIG_SERIAL_8250_RUNTIME_UARTS=6 +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_FSL=y +CONFIG_USB_OHCI_HCD=y +CONFIG_TMPFS=y diff --git a/board/qemu/ppc-mpc8544ds/readme.txt b/board/qemu/ppc-mpc8544ds/readme.txt index 0008c84b20..172aad5626 100644 --- a/board/qemu/ppc-mpc8544ds/readme.txt +++ b/board/qemu/ppc-mpc8544ds/readme.txt @@ -4,4 +4,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. -Tested with QEMU 2.9.0 +Tested with QEMU 2.12.0 diff --git a/board/qemu/ppc-virtex-ml507/linux-4.9.config b/board/qemu/ppc-virtex-ml507/linux-4.9.config deleted file mode 100644 index ed4eb792b6..0000000000 --- a/board/qemu/ppc-virtex-ml507/linux-4.9.config +++ /dev/null @@ -1,36 +0,0 @@ -CONFIG_44x=y -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -# CONFIG_EBONY is not set -CONFIG_XILINX_VIRTEX440_GENERIC_BOARD=y -CONFIG_MATH_EMULATION=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_XILINX_SYSACE=y -CONFIG_NETDEVICES=y -CONFIG_SERIO_XILINX_XPS_PS2=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_UARTLITE=y -CONFIG_SERIAL_UARTLITE_CONSOLE=y -CONFIG_SERIAL_OF_PLATFORM=y -CONFIG_XILINX_HWICAP=y -CONFIG_GPIOLIB=y -CONFIG_GPIO_SYSFS=y -CONFIG_GPIO_XILINX=y -CONFIG_FB=y -CONFIG_FB_XILINX=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_EXT4_FS=y -CONFIG_AUTOFS4_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y diff --git a/board/qemu/ppc-virtex-ml507/linux.config b/board/qemu/ppc-virtex-ml507/linux.config new file mode 100644 index 0000000000..ed4eb792b6 --- /dev/null +++ b/board/qemu/ppc-virtex-ml507/linux.config @@ -0,0 +1,36 @@ +CONFIG_44x=y +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_EBONY is not set +CONFIG_XILINX_VIRTEX440_GENERIC_BOARD=y +CONFIG_MATH_EMULATION=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_XILINX_SYSACE=y +CONFIG_NETDEVICES=y +CONFIG_SERIO_XILINX_XPS_PS2=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_UARTLITE=y +CONFIG_SERIAL_UARTLITE_CONSOLE=y +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_XILINX_HWICAP=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_XILINX=y +CONFIG_FB=y +CONFIG_FB_XILINX=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_EXT4_FS=y +CONFIG_AUTOFS4_FS=y +CONFIG_VFAT_FS=y +CONFIG_TMPFS=y diff --git a/board/qemu/ppc-virtex-ml507/readme.txt b/board/qemu/ppc-virtex-ml507/readme.txt index 42aa204bd7..6178ace816 100644 --- a/board/qemu/ppc-virtex-ml507/readme.txt +++ b/board/qemu/ppc-virtex-ml507/readme.txt @@ -4,4 +4,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. -Tested with QEMU 2.5.0 +Tested with QEMU 2.12.0 diff --git a/board/qemu/ppc64-e5500/readme.txt b/board/qemu/ppc64-e5500/readme.txt index a6ad893b4d..cfc563974d 100644 --- a/board/qemu/ppc64-e5500/readme.txt +++ b/board/qemu/ppc64-e5500/readme.txt @@ -4,4 +4,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. -Tested with QEMU 2.0.0 +Tested with QEMU 2.12.0 diff --git a/board/qemu/ppc64-pseries/readme.txt b/board/qemu/ppc64-pseries/readme.txt index 9de13779d0..5069df9e5b 100644 --- a/board/qemu/ppc64-pseries/readme.txt +++ b/board/qemu/ppc64-pseries/readme.txt @@ -4,4 +4,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. -Tested with QEMU 2.9.0 +Tested with QEMU 2.12.0 diff --git a/board/qemu/ppc64le-pseries/readme.txt b/board/qemu/ppc64le-pseries/readme.txt index 95455e9478..c23da70df0 100644 --- a/board/qemu/ppc64le-pseries/readme.txt +++ b/board/qemu/ppc64le-pseries/readme.txt @@ -4,4 +4,4 @@ qemu-system-ppc64 -M pseries -cpu POWER8 -m 256 -kernel output/images/vmlinux -a The login prompt will appear in the terminal window. -Tested with QEMU 2.10.0 +Tested with QEMU 2.12.0 diff --git a/board/qemu/sh4-r2d/linux-4.9.config b/board/qemu/sh4-r2d/linux-4.9.config deleted file mode 100644 index a3d6544549..0000000000 --- a/board/qemu/sh4-r2d/linux-4.9.config +++ /dev/null @@ -1,38 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_MODULES=y -CONFIG_CPU_SUBTYPE_SH7751R=y -CONFIG_MEMORY_START=0x0c000000 -CONFIG_FLATMEM_MANUAL=y -CONFIG_SH_RTS7751R2D=y -CONFIG_RTS7751R2D_PLUS=y -CONFIG_HEARTBEAT=y -CONFIG_PCI=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_BLK_DEV_SD=y -CONFIG_ATA=y -CONFIG_PATA_PLATFORM=y -CONFIG_NETDEVICES=y -CONFIG_8139CP=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_SH_SCI=y -CONFIG_SERIAL_SH_SCI_CONSOLE=y -CONFIG_SPI=y -CONFIG_SPI_SH_SCI=y -CONFIG_MFD_SM501=y -CONFIG_FB=y -CONFIG_FB_SH_MOBILE_LCDC=y -CONFIG_FB_SH_MOBILE_HDMI=y -CONFIG_FB_SM501=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_LOGO=y -CONFIG_SOUND=y -CONFIG_SND_YMFPCI=y -CONFIG_SOUND_PRIME=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_R9701=y -CONFIG_EXT4_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/sh4-r2d/linux.config b/board/qemu/sh4-r2d/linux.config new file mode 100644 index 0000000000..a3d6544549 --- /dev/null +++ b/board/qemu/sh4-r2d/linux.config @@ -0,0 +1,38 @@ +CONFIG_SYSVIPC=y +CONFIG_MODULES=y +CONFIG_CPU_SUBTYPE_SH7751R=y +CONFIG_MEMORY_START=0x0c000000 +CONFIG_FLATMEM_MANUAL=y +CONFIG_SH_RTS7751R2D=y +CONFIG_RTS7751R2D_PLUS=y +CONFIG_HEARTBEAT=y +CONFIG_PCI=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_BLK_DEV_SD=y +CONFIG_ATA=y +CONFIG_PATA_PLATFORM=y +CONFIG_NETDEVICES=y +CONFIG_8139CP=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SPI=y +CONFIG_SPI_SH_SCI=y +CONFIG_MFD_SM501=y +CONFIG_FB=y +CONFIG_FB_SH_MOBILE_LCDC=y +CONFIG_FB_SH_MOBILE_HDMI=y +CONFIG_FB_SM501=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_LOGO=y +CONFIG_SOUND=y +CONFIG_SND_YMFPCI=y +CONFIG_SOUND_PRIME=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_R9701=y +CONFIG_EXT4_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/sh4-r2d/readme.txt b/board/qemu/sh4-r2d/readme.txt index aa0e369d89..d22af73ae3 100644 --- a/board/qemu/sh4-r2d/readme.txt +++ b/board/qemu/sh4-r2d/readme.txt @@ -5,4 +5,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. -Tested with QEMU 2.5.0 +Tested with QEMU 2.12.0 diff --git a/board/qemu/sh4eb-r2d/linux-4.9.config b/board/qemu/sh4eb-r2d/linux-4.9.config deleted file mode 100644 index 6ead626c41..0000000000 --- a/board/qemu/sh4eb-r2d/linux-4.9.config +++ /dev/null @@ -1,38 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_MODULES=y -CONFIG_CPU_SUBTYPE_SH7751R=y -CONFIG_MEMORY_START=0x0c000000 -CONFIG_FLATMEM_MANUAL=y -CONFIG_CPU_BIG_ENDIAN=y -CONFIG_SH_RTS7751R2D=y -CONFIG_RTS7751R2D_PLUS=y -CONFIG_HEARTBEAT=y -CONFIG_PCI=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_BLK_DEV_SD=y -CONFIG_ATA=y -CONFIG_PATA_PLATFORM=y -CONFIG_NETDEVICES=y -CONFIG_8139CP=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_SH_SCI=y -CONFIG_SERIAL_SH_SCI_CONSOLE=y -CONFIG_SPI=y -CONFIG_SPI_SH_SCI=y -CONFIG_MFD_SM501=y -CONFIG_FB=y -CONFIG_FB_SH_MOBILE_LCDC=y -CONFIG_FB_SH_MOBILE_HDMI=y -CONFIG_FB_SM501=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_LOGO=y -CONFIG_SND_YMFPCI=y -CONFIG_SOUND_PRIME=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_R9701=y -CONFIG_EXT4_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/sh4eb-r2d/linux.config b/board/qemu/sh4eb-r2d/linux.config new file mode 100644 index 0000000000..6ead626c41 --- /dev/null +++ b/board/qemu/sh4eb-r2d/linux.config @@ -0,0 +1,38 @@ +CONFIG_SYSVIPC=y +CONFIG_MODULES=y +CONFIG_CPU_SUBTYPE_SH7751R=y +CONFIG_MEMORY_START=0x0c000000 +CONFIG_FLATMEM_MANUAL=y +CONFIG_CPU_BIG_ENDIAN=y +CONFIG_SH_RTS7751R2D=y +CONFIG_RTS7751R2D_PLUS=y +CONFIG_HEARTBEAT=y +CONFIG_PCI=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_BLK_DEV_SD=y +CONFIG_ATA=y +CONFIG_PATA_PLATFORM=y +CONFIG_NETDEVICES=y +CONFIG_8139CP=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SPI=y +CONFIG_SPI_SH_SCI=y +CONFIG_MFD_SM501=y +CONFIG_FB=y +CONFIG_FB_SH_MOBILE_LCDC=y +CONFIG_FB_SH_MOBILE_HDMI=y +CONFIG_FB_SM501=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_LOGO=y +CONFIG_SND_YMFPCI=y +CONFIG_SOUND_PRIME=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_R9701=y +CONFIG_EXT4_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/sh4eb-r2d/readme.txt b/board/qemu/sh4eb-r2d/readme.txt index 147adc6e2e..daf515ab2b 100644 --- a/board/qemu/sh4eb-r2d/readme.txt +++ b/board/qemu/sh4eb-r2d/readme.txt @@ -5,4 +5,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. -Tested with QEMU 2.5.0 +Tested with QEMU 2.12.0 diff --git a/board/qemu/sparc-ss10/linux-4.11.config b/board/qemu/sparc-ss10/linux-4.11.config deleted file mode 100644 index cb8d01dc02..0000000000 --- a/board/qemu/sparc-ss10/linux-4.11.config +++ /dev/null @@ -1,31 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_PCI=y -CONFIG_SUN_OPENPROMFS=m -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_WIRELESS is not set -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_BLK_DEV_SR=y -CONFIG_CHR_DEV_SG=y -CONFIG_SCSI_SUNESP=y -CONFIG_NETDEVICES=y -CONFIG_SUNLANCE=y -# CONFIG_WLAN is not set -CONFIG_INPUT_EVDEV=y -CONFIG_KEYBOARD_SUNKBD=y -CONFIG_MOUSE_SERIAL=y -CONFIG_SERIAL_SUNZILOG=y -CONFIG_SERIAL_SUNZILOG_CONSOLE=y -CONFIG_SERIAL_SUNSU=y -CONFIG_SERIAL_SUNSU_CONSOLE=y -CONFIG_SUN_OPENPROMIO=m -CONFIG_EXT4_FS=y -CONFIG_ISO9660_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/sparc-ss10/linux.config b/board/qemu/sparc-ss10/linux.config new file mode 100644 index 0000000000..cb8d01dc02 --- /dev/null +++ b/board/qemu/sparc-ss10/linux.config @@ -0,0 +1,31 @@ +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_PCI=y +CONFIG_SUN_OPENPROMFS=m +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +# CONFIG_WIRELESS is not set +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_BLK_DEV_SR=y +CONFIG_CHR_DEV_SG=y +CONFIG_SCSI_SUNESP=y +CONFIG_NETDEVICES=y +CONFIG_SUNLANCE=y +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=y +CONFIG_KEYBOARD_SUNKBD=y +CONFIG_MOUSE_SERIAL=y +CONFIG_SERIAL_SUNZILOG=y +CONFIG_SERIAL_SUNZILOG_CONSOLE=y +CONFIG_SERIAL_SUNSU=y +CONFIG_SERIAL_SUNSU_CONSOLE=y +CONFIG_SUN_OPENPROMIO=m +CONFIG_EXT4_FS=y +CONFIG_ISO9660_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/sparc-ss10/readme.txt b/board/qemu/sparc-ss10/readme.txt index 0ce461d2ea..df6a75a3fb 100644 --- a/board/qemu/sparc-ss10/readme.txt +++ b/board/qemu/sparc-ss10/readme.txt @@ -4,4 +4,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. -Tested with QEMU 2.9.0 +Tested with QEMU 2.12.0 diff --git a/board/qemu/sparc64-sun4u/linux-4.11.config b/board/qemu/sparc64-sun4u/linux-4.11.config deleted file mode 100644 index 0e1e16879d..0000000000 --- a/board/qemu/sparc64-sun4u/linux-4.11.config +++ /dev/null @@ -1,25 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_NO_HZ_IDLE=y -CONFIG_EMBEDDED=y -CONFIG_MODULES=y -CONFIG_PCI=y -CONFIG_SUN_OPENPROMFS=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -CONFIG_BLK_DEV_SD=y -CONFIG_ATA=y -CONFIG_PATA_CMD64X=y -CONFIG_NETDEVICES=y -CONFIG_E1000=y -CONFIG_SERIAL_SUNSU=y -CONFIG_SERIAL_SUNSU_CONSOLE=y -CONFIG_EXT4_FS=y -CONFIG_TMPFS=y -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="utf-8" -CONFIG_MAGIC_SYSRQ=y diff --git a/board/qemu/sparc64-sun4u/linux.config b/board/qemu/sparc64-sun4u/linux.config new file mode 100644 index 0000000000..0e1e16879d --- /dev/null +++ b/board/qemu/sparc64-sun4u/linux.config @@ -0,0 +1,25 @@ +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_NO_HZ_IDLE=y +CONFIG_EMBEDDED=y +CONFIG_MODULES=y +CONFIG_PCI=y +CONFIG_SUN_OPENPROMFS=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_BLK_DEV_SD=y +CONFIG_ATA=y +CONFIG_PATA_CMD64X=y +CONFIG_NETDEVICES=y +CONFIG_E1000=y +CONFIG_SERIAL_SUNSU=y +CONFIG_SERIAL_SUNSU_CONSOLE=y +CONFIG_EXT4_FS=y +CONFIG_TMPFS=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="utf-8" +CONFIG_MAGIC_SYSRQ=y diff --git a/board/qemu/sparc64-sun4u/readme.txt b/board/qemu/sparc64-sun4u/readme.txt index adfff7089e..24d5bbaffe 100644 --- a/board/qemu/sparc64-sun4u/readme.txt +++ b/board/qemu/sparc64-sun4u/readme.txt @@ -4,4 +4,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. -Tested with QEMU 2.9.0 +Tested with QEMU 2.12.0 diff --git a/board/qemu/x86/linux-4.15.config b/board/qemu/x86/linux-4.15.config deleted file mode 100644 index 79f7537d80..0000000000 --- a/board/qemu/x86/linux-4.15.config +++ /dev/null @@ -1,51 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_CGROUPS=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_SMP=y -CONFIG_HYPERVISOR_GUEST=y -CONFIG_PARAVIRT=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_WIRELESS is not set -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -CONFIG_VIRTIO_BLK=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_VIRTIO=y -CONFIG_ATA=y -CONFIG_ATA_PIIX=y -CONFIG_NETDEVICES=y -CONFIG_VIRTIO_NET=y -CONFIG_NE2K_PCI=y -CONFIG_8139CP=y -# CONFIG_WLAN is not set -CONFIG_INPUT_EVDEV=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_VIRTIO_CONSOLE=y -CONFIG_HW_RANDOM_VIRTIO=m -CONFIG_DRM=y -CONFIG_DRM_QXL=y -CONFIG_DRM_BOCHS=y -CONFIG_DRM_VIRTIO_GPU=y -CONFIG_SOUND=y -CONFIG_SND=y -CONFIG_SND_HDA_INTEL=y -CONFIG_SND_HDA_GENERIC=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_UHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_VIRTIO_PCI=y -CONFIG_VIRTIO_BALLOON=y -CONFIG_VIRTIO_INPUT=y -CONFIG_VIRTIO_MMIO=y -CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y -CONFIG_EXT4_FS=y -CONFIG_AUTOFS4_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/x86/linux.config b/board/qemu/x86/linux.config new file mode 100644 index 0000000000..79f7537d80 --- /dev/null +++ b/board/qemu/x86/linux.config @@ -0,0 +1,51 @@ +CONFIG_SYSVIPC=y +CONFIG_CGROUPS=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_SMP=y +CONFIG_HYPERVISOR_GUEST=y +CONFIG_PARAVIRT=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +# CONFIG_WIRELESS is not set +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_VIRTIO_BLK=y +CONFIG_BLK_DEV_SD=y +CONFIG_SCSI_VIRTIO=y +CONFIG_ATA=y +CONFIG_ATA_PIIX=y +CONFIG_NETDEVICES=y +CONFIG_VIRTIO_NET=y +CONFIG_NE2K_PCI=y +CONFIG_8139CP=y +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_VIRTIO_CONSOLE=y +CONFIG_HW_RANDOM_VIRTIO=m +CONFIG_DRM=y +CONFIG_DRM_QXL=y +CONFIG_DRM_BOCHS=y +CONFIG_DRM_VIRTIO_GPU=y +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_HDA_INTEL=y +CONFIG_SND_HDA_GENERIC=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_UHCI_HCD=y +CONFIG_USB_STORAGE=y +CONFIG_VIRTIO_PCI=y +CONFIG_VIRTIO_BALLOON=y +CONFIG_VIRTIO_INPUT=y +CONFIG_VIRTIO_MMIO=y +CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y +CONFIG_EXT4_FS=y +CONFIG_AUTOFS4_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/x86/readme.txt b/board/qemu/x86/readme.txt index b003ad5373..c5e687734c 100644 --- a/board/qemu/x86/readme.txt +++ b/board/qemu/x86/readme.txt @@ -6,4 +6,4 @@ Optionally add -smp N to emulate a SMP system with N CPUs. The login prompt will appear in the graphical window. -Tested with QEMU 2.9.0 +Tested with QEMU 2.12.0 diff --git a/board/qemu/x86_64/linux-4.15.config b/board/qemu/x86_64/linux-4.15.config deleted file mode 100644 index 5fa33d4424..0000000000 --- a/board/qemu/x86_64/linux-4.15.config +++ /dev/null @@ -1,52 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_CGROUPS=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_SMP=y -CONFIG_HYPERVISOR_GUEST=y -CONFIG_PARAVIRT=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_WIRELESS is not set -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -CONFIG_VIRTIO_BLK=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_VIRTIO=y -CONFIG_ATA=y -CONFIG_ATA_PIIX=y -CONFIG_NETDEVICES=y -CONFIG_VIRTIO_NET=y -CONFIG_NE2K_PCI=y -CONFIG_8139CP=y -# CONFIG_WLAN is not set -CONFIG_INPUT_EVDEV=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_VIRTIO_CONSOLE=y -CONFIG_HW_RANDOM_VIRTIO=m -CONFIG_DRM=y -CONFIG_DRM_QXL=y -CONFIG_DRM_BOCHS=y -CONFIG_DRM_VIRTIO_GPU=y -CONFIG_SOUND=y -CONFIG_SND=y -CONFIG_SND_HDA_INTEL=y -CONFIG_SND_HDA_GENERIC=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_UHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_VIRTIO_PCI=y -CONFIG_VIRTIO_BALLOON=y -CONFIG_VIRTIO_INPUT=y -CONFIG_VIRTIO_MMIO=y -CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y -CONFIG_EXT4_FS=y -CONFIG_AUTOFS4_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_UNWINDER_FRAME_POINTER=y diff --git a/board/qemu/x86_64/linux.config b/board/qemu/x86_64/linux.config new file mode 100644 index 0000000000..5fa33d4424 --- /dev/null +++ b/board/qemu/x86_64/linux.config @@ -0,0 +1,52 @@ +CONFIG_SYSVIPC=y +CONFIG_CGROUPS=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_SMP=y +CONFIG_HYPERVISOR_GUEST=y +CONFIG_PARAVIRT=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +# CONFIG_WIRELESS is not set +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_VIRTIO_BLK=y +CONFIG_BLK_DEV_SD=y +CONFIG_SCSI_VIRTIO=y +CONFIG_ATA=y +CONFIG_ATA_PIIX=y +CONFIG_NETDEVICES=y +CONFIG_VIRTIO_NET=y +CONFIG_NE2K_PCI=y +CONFIG_8139CP=y +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_VIRTIO_CONSOLE=y +CONFIG_HW_RANDOM_VIRTIO=m +CONFIG_DRM=y +CONFIG_DRM_QXL=y +CONFIG_DRM_BOCHS=y +CONFIG_DRM_VIRTIO_GPU=y +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_HDA_INTEL=y +CONFIG_SND_HDA_GENERIC=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_UHCI_HCD=y +CONFIG_USB_STORAGE=y +CONFIG_VIRTIO_PCI=y +CONFIG_VIRTIO_BALLOON=y +CONFIG_VIRTIO_INPUT=y +CONFIG_VIRTIO_MMIO=y +CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y +CONFIG_EXT4_FS=y +CONFIG_AUTOFS4_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_UNWINDER_FRAME_POINTER=y diff --git a/board/qemu/x86_64/readme.txt b/board/qemu/x86_64/readme.txt index ed7b5f5532..425e34b12c 100644 --- a/board/qemu/x86_64/readme.txt +++ b/board/qemu/x86_64/readme.txt @@ -6,4 +6,4 @@ Optionally add -smp N to emulate a SMP system with N CPUs. The login prompt will appear in the graphical window. -Tested with QEMU 2.9.0 +Tested with QEMU 2.12.0 diff --git a/board/qemu/xtensa-lx60/linux-4.11-nommu.config b/board/qemu/xtensa-lx60/linux-4.11-nommu.config deleted file mode 100644 index 10f7ee125c..0000000000 --- a/board/qemu/xtensa-lx60/linux-4.11-nommu.config +++ /dev/null @@ -1,38 +0,0 @@ -CONFIG_NO_HZ_IDLE=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_XTENSA_VARIANT_CUSTOM=y -CONFIG_XTENSA_VARIANT_CUSTOM_NAME="dc233c" -# CONFIG_XTENSA_VARIANT_MMU is not set -CONFIG_XTENSA_UNALIGNED_USER=y -CONFIG_PREEMPT=y -CONFIG_KERNEL_LOAD_ADDRESS=0x00003000 -# CONFIG_PCI is not set -CONFIG_XTENSA_PLATFORM_XTFPGA=y -CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="earlycon=uart8250,mmio32,0xfd050020,115200n8 console=ttyS0,115200n8 memmap=0x04000000@0" -CONFIG_DEFAULT_MEM_START=0x00000000 -CONFIG_BINFMT_FLAT=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_IPV6 is not set -CONFIG_NETFILTER=y -CONFIG_DNS_RESOLVER=y -# CONFIG_WIRELESS is not set -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_NETDEVICES=y -CONFIG_MARVELL_PHY=y -# CONFIG_WLAN is not set -CONFIG_SERIAL_8250=y -# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set -CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -CONFIG_TMPFS=y -CONFIG_FANOTIFY=y -CONFIG_PRINTK_TIME=y -# CONFIG_S32C1I_SELFTEST is not set diff --git a/board/qemu/xtensa-lx60/linux-4.11.config b/board/qemu/xtensa-lx60/linux-4.11.config deleted file mode 100644 index 625b86049f..0000000000 --- a/board/qemu/xtensa-lx60/linux-4.11.config +++ /dev/null @@ -1,36 +0,0 @@ -# CONFIG_SWAP is not set -# CONFIG_CROSS_MEMORY_ATTACH is not set -CONFIG_BLK_DEV_INITRD=y -CONFIG_XTENSA_VARIANT_DC233C=y -CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX=y -CONFIG_XTENSA_PLATFORM_XTFPGA=y -CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="console=ttyS0,38400 memmap=0x04000000@0" -# CONFIG_COMPACTION is not set -# CONFIG_BOUNCE is not set -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -# CONFIG_WIRELESS is not set -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -CONFIG_NETDEVICES=y -# CONFIG_WLAN is not set -CONFIG_SERIAL_8250=y -# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set -CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_LD_NO_RELAX=y -# CONFIG_S32C1I_SELFTEST is not set diff --git a/board/qemu/xtensa-lx60/linux-nommu.config b/board/qemu/xtensa-lx60/linux-nommu.config new file mode 100644 index 0000000000..10f7ee125c --- /dev/null +++ b/board/qemu/xtensa-lx60/linux-nommu.config @@ -0,0 +1,38 @@ +CONFIG_NO_HZ_IDLE=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_XTENSA_VARIANT_CUSTOM=y +CONFIG_XTENSA_VARIANT_CUSTOM_NAME="dc233c" +# CONFIG_XTENSA_VARIANT_MMU is not set +CONFIG_XTENSA_UNALIGNED_USER=y +CONFIG_PREEMPT=y +CONFIG_KERNEL_LOAD_ADDRESS=0x00003000 +# CONFIG_PCI is not set +CONFIG_XTENSA_PLATFORM_XTFPGA=y +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="earlycon=uart8250,mmio32,0xfd050020,115200n8 console=ttyS0,115200n8 memmap=0x04000000@0" +CONFIG_DEFAULT_MEM_START=0x00000000 +CONFIG_BINFMT_FLAT=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +# CONFIG_IPV6 is not set +CONFIG_NETFILTER=y +CONFIG_DNS_RESOLVER=y +# CONFIG_WIRELESS is not set +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_NETDEVICES=y +CONFIG_MARVELL_PHY=y +# CONFIG_WLAN is not set +CONFIG_SERIAL_8250=y +# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_HWMON is not set +# CONFIG_VGA_CONSOLE is not set +CONFIG_TMPFS=y +CONFIG_FANOTIFY=y +CONFIG_PRINTK_TIME=y +# CONFIG_S32C1I_SELFTEST is not set diff --git a/board/qemu/xtensa-lx60/linux.config b/board/qemu/xtensa-lx60/linux.config new file mode 100644 index 0000000000..625b86049f --- /dev/null +++ b/board/qemu/xtensa-lx60/linux.config @@ -0,0 +1,36 @@ +# CONFIG_SWAP is not set +# CONFIG_CROSS_MEMORY_ATTACH is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_XTENSA_VARIANT_DC233C=y +CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX=y +CONFIG_XTENSA_PLATFORM_XTFPGA=y +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=ttyS0,38400 memmap=0x04000000@0" +# CONFIG_COMPACTION is not set +# CONFIG_BOUNCE is not set +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_IPV6 is not set +# CONFIG_WIRELESS is not set +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_NETDEVICES=y +# CONFIG_WLAN is not set +CONFIG_SERIAL_8250=y +# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_HW_RANDOM is not set +# CONFIG_HWMON is not set +# CONFIG_VGA_CONSOLE is not set +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_LD_NO_RELAX=y +# CONFIG_S32C1I_SELFTEST is not set diff --git a/board/qemu/xtensa-lx60/readme.txt b/board/qemu/xtensa-lx60/readme.txt index 9a82c53752..4287e1f09e 100644 --- a/board/qemu/xtensa-lx60/readme.txt +++ b/board/qemu/xtensa-lx60/readme.txt @@ -4,4 +4,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. -Tested with QEMU 2.9.0 +Tested with QEMU 2.12.0 diff --git a/configs/qemu_aarch64_virt_defconfig b/configs/qemu_aarch64_virt_defconfig index 076773302d..2706544e52 100644 --- a/configs/qemu_aarch64_virt_defconfig +++ b/configs/qemu_aarch64_virt_defconfig @@ -10,13 +10,13 @@ BR2_TARGET_ROOTFS_EXT2=y BR2_TARGET_ROOTFS_EXT2_4=y # BR2_TARGET_ROOTFS_TAR is not set -# Linux headers same as kernel, a 4.15 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_15=y +# Linux headers same as kernel, a 4.16 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_16=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.15.2" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.16.7" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/aarch64-virt/linux-4.15.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/aarch64-virt/linux.config" BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y diff --git a/configs/qemu_arm_versatile_defconfig b/configs/qemu_arm_versatile_defconfig index 0423dc06c5..348b91bc96 100644 --- a/configs/qemu_arm_versatile_defconfig +++ b/configs/qemu_arm_versatile_defconfig @@ -10,14 +10,14 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Linux headers same as kernel, a 4.13 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_13=y +# Linux headers same as kernel, a 4.16 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_16=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.13.3" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.16.7" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/arm-versatile/linux-4.13.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/arm-versatile/linux.config" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="versatile-pb" diff --git a/configs/qemu_arm_versatile_nommu_defconfig b/configs/qemu_arm_versatile_nommu_defconfig index 9c48172e40..910c382439 100644 --- a/configs/qemu_arm_versatile_nommu_defconfig +++ b/configs/qemu_arm_versatile_nommu_defconfig @@ -21,12 +21,14 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0" # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ROOTFS_INITRAMFS=y -# Linux headers same as kernel, a 4.4 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_4=y +# Linux headers same as kernel, a 4.16 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_16=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.4.70" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.16.7" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/arm-versatile/linux-4.4-nommu.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/arm-versatile/linux-nommu.config" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="versatile-pb" diff --git a/configs/qemu_m68k_mcf5208_defconfig b/configs/qemu_m68k_mcf5208_defconfig index ccbdcfa3b7..8f8d0a048a 100644 --- a/configs/qemu_m68k_mcf5208_defconfig +++ b/configs/qemu_m68k_mcf5208_defconfig @@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0" BR2_TARGET_ROOTFS_INITRAMFS=y # BR2_TARGET_ROOTFS_TAR is not set -# Linux headers same as kernel, a 4.11 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y +# Linux headers same as kernel, a 4.16 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_16=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.16.7" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/m68k-mcf5208/linux-4.11.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/m68k-mcf5208/linux.config" BR2_LINUX_KERNEL_VMLINUX=y # Serial port config diff --git a/configs/qemu_m68k_q800_defconfig b/configs/qemu_m68k_q800_defconfig index 6dc50a7c05..d9238b650f 100644 --- a/configs/qemu_m68k_q800_defconfig +++ b/configs/qemu_m68k_q800_defconfig @@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Linux headers same as kernel, a 4.11 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y +# Linux headers same as kernel, a 4.16 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_16=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.16.7" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/m68k-q800/linux-4.11.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/m68k-q800/linux.config" BR2_LINUX_KERNEL_VMLINUX=y # Serial port config diff --git a/configs/qemu_microblazebe_mmu_defconfig b/configs/qemu_microblazebe_mmu_defconfig index ae736ff101..3055a0f8cd 100644 --- a/configs/qemu_microblazebe_mmu_defconfig +++ b/configs/qemu_microblazebe_mmu_defconfig @@ -10,14 +10,14 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyUL0" # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ROOTFS_INITRAMFS=y -# Linux headers same as kernel, a 4.11 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y +# Linux headers same as kernel, a 4.16 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_16=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.16.7" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazebe-mmu/linux-4.11.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazebe-mmu/linux.config" BR2_LINUX_KERNEL_LINUX_BIN=y BR2_LINUX_KERNEL_PATCH="board/qemu/microblazebe-mmu/xilinx-xemaclite.patch" diff --git a/configs/qemu_microblazeel_mmu_defconfig b/configs/qemu_microblazeel_mmu_defconfig index 3dedecf710..073a7173fa 100644 --- a/configs/qemu_microblazeel_mmu_defconfig +++ b/configs/qemu_microblazeel_mmu_defconfig @@ -10,14 +10,14 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyUL0" # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ROOTFS_INITRAMFS=y -# Linux headers same as kernel, a 4.11 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y +# Linux headers same as kernel, a 4.16 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_16=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.16.7" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazeel-mmu/linux-4.11.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazeel-mmu/linux.config" BR2_LINUX_KERNEL_LINUX_BIN=y BR2_LINUX_KERNEL_PATCH="board/qemu/microblazeel-mmu/xilinx-xemaclite.patch" diff --git a/configs/qemu_mips32r2_malta_defconfig b/configs/qemu_mips32r2_malta_defconfig index db408b0e72..d07bc11003 100644 --- a/configs/qemu_mips32r2_malta_defconfig +++ b/configs/qemu_mips32r2_malta_defconfig @@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Linux headers same as kernel, a 4.11 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y +# Linux headers same as kernel, a 4.16 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_16=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.16.7" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r2-malta/linux-4.11.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r2-malta/linux.config" BR2_LINUX_KERNEL_VMLINUX=y # Serial port config diff --git a/configs/qemu_mips32r2el_malta_defconfig b/configs/qemu_mips32r2el_malta_defconfig index ccec419add..55e68b1fdc 100644 --- a/configs/qemu_mips32r2el_malta_defconfig +++ b/configs/qemu_mips32r2el_malta_defconfig @@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Linux headers same as kernel, a 4.11 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y +# Linux headers same as kernel, a 4.16 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_16=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.16.7" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r2el-malta/linux-4.11.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r2el-malta/linux.config" BR2_LINUX_KERNEL_VMLINUX=y # Serial port config diff --git a/configs/qemu_mips32r6_malta_defconfig b/configs/qemu_mips32r6_malta_defconfig index 3aee84c53a..5802393368 100644 --- a/configs/qemu_mips32r6_malta_defconfig +++ b/configs/qemu_mips32r6_malta_defconfig @@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Linux headers same as kernel, a 4.11 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y +# Linux headers same as kernel, a 4.16 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_16=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.16.7" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r6-malta/linux-4.11.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r6-malta/linux.config" BR2_LINUX_KERNEL_VMLINUX=y # Compiler diff --git a/configs/qemu_mips32r6el_malta_defconfig b/configs/qemu_mips32r6el_malta_defconfig index aa43dce945..93e2a86509 100644 --- a/configs/qemu_mips32r6el_malta_defconfig +++ b/configs/qemu_mips32r6el_malta_defconfig @@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Linux headers same as kernel, a 4.11 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y +# Linux headers same as kernel, a 4.16 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_16=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.16.7" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r6el-malta/linux-4.11.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r6el-malta/linux.config" BR2_LINUX_KERNEL_VMLINUX=y # Compiler diff --git a/configs/qemu_mips64_malta_defconfig b/configs/qemu_mips64_malta_defconfig index 52e42992a6..99b457a9f8 100644 --- a/configs/qemu_mips64_malta_defconfig +++ b/configs/qemu_mips64_malta_defconfig @@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Linux headers same as kernel, a 4.11 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y +# Linux headers same as kernel, a 4.16 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_16=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.16.7" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64-malta/linux-4.11.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64-malta/linux.config" BR2_LINUX_KERNEL_VMLINUX=y # Serial port config diff --git a/configs/qemu_mips64el_malta_defconfig b/configs/qemu_mips64el_malta_defconfig index 2b35c1a016..f2dacbd760 100644 --- a/configs/qemu_mips64el_malta_defconfig +++ b/configs/qemu_mips64el_malta_defconfig @@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Linux headers same as kernel, a 4.11 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y +# Linux headers same as kernel, a 4.16 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_16=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.16.7" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64el-malta/linux-4.11.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64el-malta/linux.config" BR2_LINUX_KERNEL_VMLINUX=y # Serial port config diff --git a/configs/qemu_mips64r6_malta_defconfig b/configs/qemu_mips64r6_malta_defconfig index 06c0133f9f..d291213db7 100644 --- a/configs/qemu_mips64r6_malta_defconfig +++ b/configs/qemu_mips64r6_malta_defconfig @@ -10,15 +10,15 @@ BR2_SYSTEM_DHCP="eth0" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Linux headers same as kernel, a 4.11 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y +# Linux headers same as kernel, a 4.16 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_16=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.16.7" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64r6-malta/linux-4.11.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64r6-malta/linux.config" BR2_LINUX_KERNEL_VMLINUX=y # Compiler diff --git a/configs/qemu_mips64r6el_malta_defconfig b/configs/qemu_mips64r6el_malta_defconfig index e80e728486..4740bdee28 100644 --- a/configs/qemu_mips64r6el_malta_defconfig +++ b/configs/qemu_mips64r6el_malta_defconfig @@ -10,15 +10,15 @@ BR2_SYSTEM_DHCP="eth0" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Linux headers same as kernel, a 4.11 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y +# Linux headers same as kernel, a 4.16 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_16=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.16.7" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64r6el-malta/linux-4.11.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64r6el-malta/linux.config" BR2_LINUX_KERNEL_VMLINUX=y # Compiler diff --git a/configs/qemu_nios2_10m50_defconfig b/configs/qemu_nios2_10m50_defconfig index a9eaf0800a..cff219257a 100644 --- a/configs/qemu_nios2_10m50_defconfig +++ b/configs/qemu_nios2_10m50_defconfig @@ -1,10 +1,10 @@ BR2_nios2=y BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.16.7" BR2_LINUX_KERNEL_DEFCONFIG="10m50" -BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/qemu/nios2-10m50/linux-4.11.fragment" +BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/qemu/nios2-10m50/linux.fragment" BR2_TARGET_ROOTFS_INITRAMFS=y -# Linux headers same as kernel, a 4.11 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y +# Linux headers same as kernel, a 4.16 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_16=y diff --git a/configs/qemu_or1k_defconfig b/configs/qemu_or1k_defconfig index c667142185..636a0d25b1 100644 --- a/configs/qemu_or1k_defconfig +++ b/configs/qemu_or1k_defconfig @@ -5,12 +5,12 @@ BR2_or1k=y # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ROOTFS_INITRAMFS=y -# Linux headers same as kernel, a 4,14 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_14=y +# Linux headers same as kernel, a 4,16 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_16=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.14.2" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.16.7" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/or1k/linux.config" diff --git a/configs/qemu_ppc64_e5500_defconfig b/configs/qemu_ppc64_e5500_defconfig index 8173a0251b..7a325a5070 100644 --- a/configs/qemu_ppc64_e5500_defconfig +++ b/configs/qemu_ppc64_e5500_defconfig @@ -6,12 +6,12 @@ BR2_powerpc_e5500=y BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" # Linux headers same as the kernel -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_15=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_16=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.15.7" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.16.7" BR2_LINUX_KERNEL_DEFCONFIG="corenet64_smp" BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/qemu/ppc64-e5500/linux.fragment" BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y diff --git a/configs/qemu_ppc64_pseries_defconfig b/configs/qemu_ppc64_pseries_defconfig index 84076314d9..d2d69f1c3c 100644 --- a/configs/qemu_ppc64_pseries_defconfig +++ b/configs/qemu_ppc64_pseries_defconfig @@ -10,12 +10,12 @@ BR2_TARGET_GENERIC_GETTY_PORT="hvc0" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Linux headers same as kernel, a 4.13 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_13=y +# Linux headers same as kernel, a 4.16 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_16=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.13.1" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.16.7" BR2_LINUX_KERNEL_DEFCONFIG="pseries" BR2_LINUX_KERNEL_VMLINUX=y diff --git a/configs/qemu_ppc64le_pseries_defconfig b/configs/qemu_ppc64le_pseries_defconfig index 62e729d302..9a85f76dd9 100644 --- a/configs/qemu_ppc64le_pseries_defconfig +++ b/configs/qemu_ppc64le_pseries_defconfig @@ -10,12 +10,12 @@ BR2_SYSTEM_DHCP="eth0" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Linux headers same as kernel, a 4.13 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_13=y +# Linux headers same as kernel, a 4.16 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_16=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.13.1" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.16.7" BR2_LINUX_KERNEL_DEFCONFIG="pseries_le" BR2_LINUX_KERNEL_VMLINUX=y diff --git a/configs/qemu_ppc_g3beige_defconfig b/configs/qemu_ppc_g3beige_defconfig index 9482aaa874..451a9b52d8 100644 --- a/configs/qemu_ppc_g3beige_defconfig +++ b/configs/qemu_ppc_g3beige_defconfig @@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Linux headers same as kernel, a 4.11 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y +# Linux headers same as kernel, a 4.16 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_16=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.16.7" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-g3beige/linux-4.11.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-g3beige/linux.config" BR2_LINUX_KERNEL_VMLINUX=y # Serial port config diff --git a/configs/qemu_ppc_mpc8544ds_defconfig b/configs/qemu_ppc_mpc8544ds_defconfig index d2d92b6652..38e41a7fa2 100644 --- a/configs/qemu_ppc_mpc8544ds_defconfig +++ b/configs/qemu_ppc_mpc8544ds_defconfig @@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0" # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ROOTFS_INITRAMFS=y -# Linux headers same as kernel, a 4.11 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y +# Linux headers same as kernel, a 4.16 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_16=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.16.7" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-mpc8544ds/linux-4.11.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-mpc8544ds/linux.config" BR2_LINUX_KERNEL_VMLINUX=y # Serial port config diff --git a/configs/qemu_ppc_virtex_ml507_defconfig b/configs/qemu_ppc_virtex_ml507_defconfig index 84cb329872..6824afca3c 100644 --- a/configs/qemu_ppc_virtex_ml507_defconfig +++ b/configs/qemu_ppc_virtex_ml507_defconfig @@ -6,8 +6,8 @@ BR2_powerpc_440=y # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ROOTFS_INITRAMFS=y -# Linux headers same as kernel, a 4.9 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y +# Linux headers same as kernel, a 4.16 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_16=y # Use soft float BR2_SOFT_FLOAT=y @@ -15,9 +15,9 @@ BR2_SOFT_FLOAT=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.16.7" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-virtex-ml507/linux-4.9.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-virtex-ml507/linux.config" BR2_LINUX_KERNEL_VMLINUX=y BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="virtex440-ml507" diff --git a/configs/qemu_sh4_r2d_defconfig b/configs/qemu_sh4_r2d_defconfig index becce23ee1..8ddcb80b02 100644 --- a/configs/qemu_sh4_r2d_defconfig +++ b/configs/qemu_sh4_r2d_defconfig @@ -10,13 +10,13 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttySC1" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Linux headers same as kernel, a 4.9 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y +# Linux headers same as kernel, a 4.16 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_16=y # Linux kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.16.7" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4-r2d/linux-4.9.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4-r2d/linux.config" BR2_LINUX_KERNEL_ZIMAGE=y diff --git a/configs/qemu_sh4eb_r2d_defconfig b/configs/qemu_sh4eb_r2d_defconfig index 61d9ac9dde..79e8c38e8a 100644 --- a/configs/qemu_sh4eb_r2d_defconfig +++ b/configs/qemu_sh4eb_r2d_defconfig @@ -9,13 +9,13 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttySC1" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Linux headers same as kernel, a 4.9 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y +# Linux headers same as kernel, a 4.16 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_16=y # Linux kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.16.7" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4eb-r2d/linux-4.9.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4eb-r2d/linux.config" BR2_LINUX_KERNEL_ZIMAGE=y diff --git a/configs/qemu_sparc64_sun4u_defconfig b/configs/qemu_sparc64_sun4u_defconfig index 072fba79bc..baa8dbfb59 100644 --- a/configs/qemu_sparc64_sun4u_defconfig +++ b/configs/qemu_sparc64_sun4u_defconfig @@ -9,12 +9,12 @@ BR2_SYSTEM_DHCP="eth0" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Linux headers same as kernel, a 4.11 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y +# Linux headers same as kernel, a 4.16 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_16=y # Linux kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.12" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.16.7" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc64-sun4u/linux-4.11.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc64-sun4u/linux.config" diff --git a/configs/qemu_sparc_ss10_defconfig b/configs/qemu_sparc_ss10_defconfig index 8c6b563a85..9943781a5b 100644 --- a/configs/qemu_sparc_ss10_defconfig +++ b/configs/qemu_sparc_ss10_defconfig @@ -9,12 +9,12 @@ BR2_SYSTEM_DHCP="eth0" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Linux headers same as kernel, a 4.11 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y +# Linux headers same as kernel, a 4.16 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_16=y # Linux kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.12" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.16.7" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc-ss10/linux-4.11.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc-ss10/linux.config" diff --git a/configs/qemu_x86_64_defconfig b/configs/qemu_x86_64_defconfig index b92ae17ae6..12b30bf764 100644 --- a/configs/qemu_x86_64_defconfig +++ b/configs/qemu_x86_64_defconfig @@ -9,12 +9,12 @@ BR2_TARGET_GENERIC_GETTY_PORT="tty1" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Linux headers same as kernel, a 4.15 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_15=y +# Linux headers same as kernel, a 4.16 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_16=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.15" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.16.7" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.15.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux.config" diff --git a/configs/qemu_x86_defconfig b/configs/qemu_x86_defconfig index ed6c198ac2..985ff32b44 100644 --- a/configs/qemu_x86_defconfig +++ b/configs/qemu_x86_defconfig @@ -10,12 +10,12 @@ BR2_TARGET_GENERIC_GETTY_PORT="tty1" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Linux headers same as kernel, a 4.15 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_15=y +# Linux headers same as kernel, a 4.16 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_16=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.15" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.16.7" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86/linux-4.15.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86/linux.config" diff --git a/configs/qemu_xtensa_lx60_defconfig b/configs/qemu_xtensa_lx60_defconfig index d8614ef244..a735c991c7 100644 --- a/configs/qemu_xtensa_lx60_defconfig +++ b/configs/qemu_xtensa_lx60_defconfig @@ -11,15 +11,15 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ROOTFS_INITRAMFS=y -# Linux headers same as kernel, a 4.11 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y +# Linux headers same as kernel, a 4.16 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_16=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.16.7" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/xtensa-lx60/linux-4.11.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/xtensa-lx60/linux.config" BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y BR2_LINUX_KERNEL_IMAGE_NAME="Image.elf" BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="Image" diff --git a/configs/qemu_xtensa_lx60_nommu_defconfig b/configs/qemu_xtensa_lx60_nommu_defconfig index 174ebd3d5f..f4d6837bc1 100644 --- a/configs/qemu_xtensa_lx60_nommu_defconfig +++ b/configs/qemu_xtensa_lx60_nommu_defconfig @@ -15,15 +15,15 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ROOTFS_INITRAMFS=y -# Linux headers same as kernel, a 4.11 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y +# Linux headers same as kernel, a 4.16 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_16=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.16.7" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/xtensa-lx60/linux-4.11-nommu.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/xtensa-lx60/linux-nommu.config" BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y BR2_LINUX_KERNEL_IMAGE_NAME="Image.elf" BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="Image"