From: Joel Stanley Date: Wed, 15 Apr 2020 06:32:21 +0000 (+0930) Subject: README: hello world needs 16KB of RAM X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=04b784011aab91e1d0f4a41e5b0136fe4639b59c;p=microwatt.git README: hello world needs 16KB of RAM STACK_TOP is at 0x2000 (8K) so we need something larger as a minimum. Signed-off-by: Joel Stanley --- diff --git a/README.md b/README.md index 030a22e..8bf4622 100644 --- a/README.md +++ b/README.md @@ -94,9 +94,9 @@ fusesoc library add microwatt /path/to/microwatt/ - Build using FuseSoC. For hello world (Replace nexys_video with your FPGA board such as --target=arty_a7-100): ``` -fusesoc run --target=nexys_video microwatt --memory_size=8192 --ram_init_file=/path/to/microwatt/fpga/hello_world.hex +fusesoc run --target=nexys_video microwatt --memory_size=16384 --ram_init_file=/path/to/microwatt/fpga/hello_world.hex ``` -You should then be able to see output via the serial port of the board (/dev/ttyUSB1, 115200 for example assuming standard clock speeds). There is a know bug where initial output may not be sent - try the reset (not programming button on your board if you don't see anything. +You should then be able to see output via the serial port of the board (/dev/ttyUSB1, 115200 for example assuming standard clock speeds). There is a know bug where initial output may not be sent - try the reset (not programming button) on your board if you don't see anything. - To build micropython (currently requires 1MB of BRAM eg an Artix-7 A200):