From: Rob Savoye <rob@cygnus>
Date: Sun, 7 Mar 1993 23:11:56 +0000 (+0000)
Subject: Doesn't exit after internal errors.
X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=05a291bb1ffc2ede7277db99a3f4b98b39b0c4d6;p=binutils-gdb.git

Doesn't exit after internal errors.
---

diff --git a/gdb/testsuite/config/mips-gdb.exp b/gdb/testsuite/config/mips-gdb.exp
index 628227598f4..489f053041f 100644
--- a/gdb/testsuite/config/mips-gdb.exp
+++ b/gdb/testsuite/config/mips-gdb.exp
@@ -167,12 +167,12 @@ proc gdb_start { } {
 	send -i $shell_id "\CC"
 	expect -i $shell_id {
 	    -re "<IDT>$" { }
-	    timeout     { error "(timeout) board did not come up."; alldone }
+	    timeout     { error "(timeout) board did not come up."; return -1 }
 	}
 	send -i $shell_id "go 0xbfc00000"
 	expect -i $shell_id {
 	    -re "<IDT>$" { }
-	    timeout     { error "(timeout) board did not come up."; alldone }
+	    timeout     { error "(timeout) board did not come up."; return -1 }
 	}
 	exit_remote_shell $shell_id
     }
@@ -190,9 +190,9 @@ proc gdb_start { } {
 		send_user "$GDB initialized for cross mode\n\n"
 	    }
 	}
-	-re "$prompt $"     { error "GDB never initialized."; alldone }
+	-re "$prompt $"     { error "GDB never initialized."; return -1 }
 	timeout             { error "(timeout) GDB never initialized.";
-			      alldone }
+			      return -1 }
     }
 
     # force the height to "unlimited", so no pagers get used
@@ -221,7 +221,7 @@ proc gdb_start { } {
 	timeout { 
 	    error "Couldn't set MIPS target."
 	    set timeout 10
-	    alldone
+	    return -1
 	}
     }
     set timeout 10
diff --git a/gdb/testsuite/config/nind-gdb.exp b/gdb/testsuite/config/nind-gdb.exp
index 8d2f1575c31..c9c6b2c303e 100644
--- a/gdb/testsuite/config/nind-gdb.exp
+++ b/gdb/testsuite/config/nind-gdb.exp
@@ -49,7 +49,7 @@ proc gdb_load { arg } {
     global GDB
     set loadfile [file tail $arg]
     set loadpath [file dirname $arg]
-    send_user "Not implememted yet\n" ; alldone
+    send_user "Not implememted yet\n" ; return -1
 }
 
 #
@@ -93,7 +93,7 @@ proc gdb_start { } {
     global prompt
     global verbose
     global targetname
-    send_user "Not implememted yet\n" ; alldone
+    send_user "Not implememted yet\n" ; return -1
 }
 
 expect_after {
diff --git a/gdb/testsuite/config/udi-gdb.exp b/gdb/testsuite/config/udi-gdb.exp
index 644f4af0611..ab7eecd5902 100644
--- a/gdb/testsuite/config/udi-gdb.exp
+++ b/gdb/testsuite/config/udi-gdb.exp
@@ -145,9 +145,9 @@ proc gdb_start { } {
 		send_user "$GDB initialized for cross mode\n\n"
 	    }
 	}
-	-re "$prompt $"     { error "GDB never initialized."; alldone }
+	-re "$prompt $"     { error "GDB never initialized."; return -1 }
 	timeout             { error "(timeout) GDB never initialized.";
-	    alldone }
+	    return -1 }
     }
 
     # force the height to "unlimited", so no pagers get used
@@ -178,7 +178,7 @@ proc gdb_start { } {
 	timeout { 
 	    error "Couldn't set target for vxworks."
 	    set timeout 10
-	    alldone
+	    return -1
 	}
     }
     set timeout 10
diff --git a/gdb/testsuite/config/unix-gdb.exp b/gdb/testsuite/config/unix-gdb.exp
index e59c97b2a99..6ffd41d6048 100644
--- a/gdb/testsuite/config/unix-gdb.exp
+++ b/gdb/testsuite/config/unix-gdb.exp
@@ -71,13 +71,14 @@ proc gdb_unload {} {
 	-re "$prompt $" {}
 	timeout {
 	    error "Couldn't unload file in $GDB (timed out)."
-	    alldone
+	    return -1
 	}
     }
 }
 
 #
 # gdb_load -- load a file into the debugger.
+#             return a -1 if anything goes wrong.
 #
 proc gdb_load { arg } {
     global verbose
@@ -114,13 +115,13 @@ proc gdb_load { arg } {
 		    send_user "\t\tLoaded $arg with new symbol table into $GDB\n"
 		}
 		}
-		timeout		{ error "(timeout) Couldn't load $arg, other program already loaded."; alldone }
+		timeout		{ error "(timeout) Couldn't load $arg, other program already loaded."; return -1 }
 	    }
 	}
 	-re ".*No such file or directory.*$prompt $"\
-	    { error "($arg) No such file or directory\n"; alldone }
-	-re "$prompt $" { error "couldn't load $arg into $GDB."; alldone }
-	timeout		{ error "couldn't load $arg into $GDB (timed out)."; alldone }
+	    { error "($arg) No such file or directory\n"; return -1 }
+	-re "$prompt $" { error "couldn't load $arg into $GDB."; return -1 }
+	timeout		{ error "couldn't load $arg into $GDB (timed out)."; return -1 }
     }
 }
 
@@ -190,8 +191,8 @@ proc gdb_start {} {
 	-re ".*$prompt $"	{ if $verbose>1 then {
 	    send_user "GDB initialized for native mode\n" }
 	}
-	-re "$prompt $"	{ error "GDB never initialized."; alldone }
-	timeout		{ error "(timeout) GDB never initialized."; alldone }
+	-re "$prompt $"	{ error "GDB never initialized."; return -1 }
+	timeout		{ error "(timeout) GDB never initialized."; return -1 }
     }
     set timeout $oldtimeout
     # force the height to "unlimited", so no pagers get used
diff --git a/gdb/testsuite/config/vx-gdb.exp b/gdb/testsuite/config/vx-gdb.exp
index 9e88ef053ee..5d836a04813 100644
--- a/gdb/testsuite/config/vx-gdb.exp
+++ b/gdb/testsuite/config/vx-gdb.exp
@@ -179,8 +179,8 @@ proc gdb_start { } {
 		    send_user "\nVxWorks has closed the shell\n"
 		}
 	    }
-	    eof         { error "(eof) never disconnected from VxWorks shell."; alldone }
-	    timeout     { error "(timeout) never disconnected from VxWorks shell."; alldone }
+	    eof         { error "(eof) never disconnected from VxWorks shell."; return -1 }
+	    timeout     { error "(timeout) never disconnected from VxWorks shell."; return -1 }
 	}
 	close -i $shell_id
 
@@ -202,7 +202,7 @@ proc gdb_start { } {
     #	    send_user "\nVxWorks set host=$vx_host, uid=$vx_uid, gid=$vx_gid\n"
     #	}
     #    }
-    #    timeout		{ error "couldn't set host=$vx_host, uid=$vx_uid, gid=$vx_gid\n"; alldone }
+    #    timeout		{ error "couldn't set host=$vx_host, uid=$vx_uid, gid=$vx_gid\n"; return -1 }
     #}
 
     #send -i $shell_id cd \"$base_dir\"\n
@@ -212,7 +212,7 @@ proc gdb_start { } {
     #	    send_user "VxWorks changed directory to $base_dir\n"
     #	}
     #    }
-    #    timeout		{ error "couldn't load $arg into $bin."; alldone }
+    #    timeout		{ error "couldn't load $arg into $bin."; return -1 }
     #}
 
     spawn_vxgdb
@@ -238,9 +238,9 @@ proc spawn_vxgdb { } {
 		send_user "$GDB initialized for cross mode to Vxworks\n\n"
 	    }
 	}
-	-re "$prompt $"     { error "GDB never initialized."; alldone }
+	-re "$prompt $"     { error "GDB never initialized."; return -1 }
 	timeout             { error "(timeout) GDB never initialized.";
-	    alldone }
+	    return -1 }
     }
 
     # force the height to "unlimited", so no pagers get used
@@ -273,7 +273,7 @@ proc spawn_vxgdb { } {
 	timeout { 
 	    error "Couldn't set target for vxworks."
 	    set timeout 10
-	    alldone
+	    return -1
 	}
     }
     set timeout 10