From: Brian Paul Date: Thu, 1 May 2003 19:12:23 +0000 (+0000) Subject: Ian's buffer swap extensions X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=09b00c5ded8e6211c9c79be600bb8c8ecad0d8fc;p=mesa.git Ian's buffer swap extensions --- diff --git a/docs/MESA_swap_control.spec b/docs/MESA_swap_control.spec new file mode 100644 index 00000000000..e05d515496f --- /dev/null +++ b/docs/MESA_swap_control.spec @@ -0,0 +1,117 @@ +Name + + MESA_swap_control + +Name Strings + + GLX_MESA_swap_control + +Contact + + Ian Romanick, IBM (idr 'at' us.ibm.com) + +Status + + Deployed in DRI drivers post-XFree86 4.3. + +Version + + Date: 3/17/2003 Revision: 1.0 + +Number + + ??? + +Dependencies + + None + + Based on GLX_SGI_swap_control version 1.9 and WGL_EXT_swap_control + version 1.5. + +Overview + + This extension allows an application to specify a minimum periodicity + of color buffer swaps, measured in video frame periods. + +New Procedures and Functions + + int glXSwapIntervalMESA(int interval) + int glXGetSwapIntervalMESA(void) + +New Tokens + + None + +Additions to Chapter 2 of the 1.4 GL Specification (OpenGL Operation) + + None + +Additions to Chapter 3 of the 1.4 GL Specification (Rasterization) + + None + +Additions to Chapter 4 of the 1.4 GL Specification (Per-Fragment Operations +and the Framebuffer) + + None + +Additions to Chapter 5 of the 1.4 GL Specification (Special Functions) + + None + +Additions to Chapter 6 of the 1.4 GL Specification (State and State Requests) + + None + +Additions to the GLX 1.3 Specification + + [Add the following to Section 3.3.10 of the GLX Specification (Double + Buffering)] + + glXSwapIntervalMESA specifies the minimum number of video frame periods + per buffer swap. (e.g. a value of two means that the color buffers + will be swapped at most every other video frame.) A return value + of zero indicates success; otherwise an error occurred. The interval + takes effect when glXSwapBuffers is first called subsequent to the + glXSwapIntervalMESA call. + + A video frame period is the time required by the monitor to display a + full frame of video data. In the case of an interlaced monitor, + this is typically the time required to display both the even and odd + fields of a frame of video data. + + If is set to a value of 0, buffer swaps are not synchron- + ized to a video frame. The value is silently clamped to + the maximum implementation-dependent value supported before being + stored. + + The swap interval is not part of the render context state. It cannot + be pushed or popped. The current swap interval for the window + associated with the current context can be obtained by calling + glXGetSwapIntervalMESA. The default swap interval is 1. + + On XFree86, setting the environment variable LIBGL_NO_VSYNC sets the + swap interval to 0. + +Errors + + glXSwapIntervalMESA returns GLX_BAD_VALUE if parameter is + less than zero. + + glXSwapIntervalMESA returns GLX_BAD_CONTEXT if there is no current + GLXContext. + +GLX Protocol + + None. This extension only extends to direct rendering contexts. + +New State + + Get Value Get Command Type Initial Value + --------- ----------- ---- ------------- + [swap interval] GetSwapInterval Z+ 1 + +New Implementation Dependent State + + None diff --git a/docs/MESA_swap_frame_usage.spec b/docs/MESA_swap_frame_usage.spec new file mode 100644 index 00000000000..028a6b8f7ec --- /dev/null +++ b/docs/MESA_swap_frame_usage.spec @@ -0,0 +1,196 @@ +Name + + MESA_swap_frame_usage + +Name Strings + + GLX_MESA_swap_frame_usage + +Contact + + Ian Romanick, IBM (idr 'at' us.ibm.com) + +Status + + Deployed in DRI drivers post-XFree86 4.3. + +Version + + Date: 3/17/2003 Revision: 1.0 + +Number + + ??? + +Dependencies + + GLX_SGI_swap_control affects the definition of this extension. + GLX_MESA_swap_control affects the definition of this extension. + GLX_OML_sync_control affects the definition of this extension. + + Based on WGL_I3D_swap_frame_usage version 1.3. + +Overview + + This extension allows an application to deterine what portion of the + swap period has elapsed since the last swap operation completed. The + "usage" value is a floating point value on the range [0,max] which is + calculated as follows: + + td + percent = ---- + tf + + where td is the time measured from the last completed buffer swap (or + call to enable the statistic) to when the next buffer swap completes, tf + is the entire time for a frame which may be multiple screen refreshes + depending on the swap interval as set by the GLX_SGI_swap_control or + GLX_OML_sync_control extensions. + + The value, percent, indicates the amount of time spent between the + completion of the two swaps. If the value is in the range [0,1], the + buffer swap occurred within the time period required to maintain a + constant frame rate. If the value is in the range (1,max], a constant + frame rate was not achieved. The value indicates the number of frames + required to draw. + + This definition of "percent" differs slightly from + WGL_I3D_swap_frame_usage. In WGL_I3D_swap_frame_usage, the measurement + is taken from the completion of one swap to the issuance of the next. + This representation may not be as useful as measuring between + completions, as a significant amount of time may pass between the + issuance of a swap and the swap actually occuring. + + There is also a mechanism to determine whether a frame swap was + missed. + +New Procedures and Functions + + int glXGetFrameUsageMESA(Display *dpy, + GLXDrawable drawable, + float *usage) + + int glXBeginFrameTrackingMESA(Display *dpy, + GLXDrawable drawable) + + int glXEndFrameTrackingMESA(Display *dpy, + GLXDrawable drawable) + + int glXQueryFrameTrackingMESA(Display *dpy, + GLXDrawable drawable, + int64_t *swapCount, + int64_t *missedFrames, + float *lastMissedUsage) + +New Tokens + + None + +Additions to Chapter 2 of the 1.4 GL Specification (OpenGL Operation) + + None + +Additions to Chapter 3 of the 1.4 GL Specification (Rasterization) + + None + +Additions to Chapter 4 of the 1.4 GL Specification (Per-Fragment Operations +and the Framebuffer) + + None + +Additions to Chapter 5 of the 1.4 GL Specification (Special Functions) + + None + +Additions to Chapter 6 of the 1.4 GL Specification (State and State Requests) + + None + +Additions to the GLX 1.3 Specification + + The frame usage is measured as the percentage of the swap period elapsed + between two buffer-swap operations being commited. In unextened GLX the + swap period is the vertical refresh time. If SGI_swap_control or + MESA_swap_control are supported, the swap period is the vertical refresh + time multiplied by the swap interval (or one if the swap interval is set + to zero). + + If OML_sync_control is supported, the swap period is the vertical + refresh time multiplied by the divisor parameter to + glXSwapBuffersMscOML. The frame usage in this case is less than 1.0 if + the swap is commited before target_msc, and is greater than or equal to + 1.0 otherwise. The actual usage value is based on the divisor and is + never less than 0.0. + + int glXBeginFrameTrackingMESA(Display *dpy, + GLXDrawable drawable, + float *usage) + + glXGetFrameUsageMESA returns a floating-point value in + that represents the current swap usage, as defined above. + + Missed frame swaps can be tracked by calling the following function: + + int glXBeginFrameTrackingMESA(Display *dpy, + GLXDrawable drawable) + + glXBeginFrameTrackingMESA resets a "missed frame" count and + synchronizes with the next frame vertical sync before it returns. + If a swap is missed based in the rate control specified by the + set by glXSwapIntervalSGI or the default swap of once + per frame, the missed frame count is incremented. + + The current missed frame count and total number of swaps since + the last call to glXBeginFrameTrackingMESA can be obtained by + callling the following function: + + int glXQueryFrameTrackingMESA(Display *dpy, + GLXDrawable drawable, + int64_t *swapCount, + int64_t *missedFrames, + float *lastMissedUsage) + + The location pointed to by will be updated with the + number of swaps that have been commited. This value may not match the + number of swaps that have been requested since swaps may be + queued by the implementation. This function can be called at any + time and does not synchronize to vertical blank. + + The location pointed to by will contain the number + swaps that missed the specified frame. The frame usage for the + last missed frame is returned in the location pointed to by + . + + Frame tracking is disabled by calling the function + + int glXEndFrameTrackingMESA(Display *dpy, + GLXDrawable drawable) + + This function will not return until all swaps have occurred. The + application can call glXQueryFrameTrackingMESA for a final swap and + missed frame count. + + If these functions are succesful, zero is returned. If the context + associated with dpy and drawable is not a direct context, + GLX_BAD_CONTEXT is returned. + +Errors + + If the function succeeds, zero is returned. If the function + fails, one of the following error codes is returned: + + GLX_BAD_CONTEXT The current rendering context is not a direct + context. + +GLX Protocol + + None. This extension only extends to direct rendering contexts. + +New State + + None + +New Implementation Dependent State + + None