From: Eric Andersen <andersen@codepoet.org>
Date: Wed, 13 Dec 2006 11:57:14 +0000 (-0000)
Subject: rename
X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=09d614de2845e72b77202e0ace40357e5942e28f;p=buildroot.git

rename
---

diff --git a/target/device/x86/i386/linux.mk b/target/device/x86/i386/linux.mk
deleted file mode 100644
index af872b41b9..0000000000
--- a/target/device/x86/i386/linux.mk
+++ /dev/null
@@ -1,114 +0,0 @@
-#############################################################
-#
-# Linux kernel 2.6 target
-#
-#############################################################
-ifneq ($(filter $(TARGETS),linux26),)
-
-
-# Version of Linux to download and then apply patches to
-DOWNLOAD_LINUX26_VERSION=2.6.19.1
-# Version of Linux after applying any patches
-LINUX26_VERSION=2.6.19.1
-
-
-
-LINUX26_SOURCE=linux-$(DOWNLOAD_LINUX26_VERSION).tar.bz2
-LINUX26_SITE=http://ftp.kernel.org/pub/linux/kernel/v2.6
-
-#LINUX26_FORMAT=vmlinux
-#LINUX26_BINLOC=$(LINUX26_FORMAT)
-LINUX26_FORMAT=bzImage
-LINUX26_BINLOC=arch/i386/boot/$(LINUX26_FORMAT)
-
-# Linux kernel configuration file
-LINUX26_KCONFIG=$(X86_I386_PATH)/linux26.config
-
-# File name for the Linux kernel binary
-LINUX26_KERNEL=linux-kernel-$(LINUX26_VERSION)-$(KERNEL_ARCH)
-
-# Version of Linux AFTER patches
-LINUX26_DIR=$(BUILD_DIR)/linux-$(LINUX26_VERSION)
-
-# kernel patches
-LINUX26_PATCH_DIR=target/device/x86/i386/kernel-patches/
-
-LINUX26_MAKE_FLAGS = $(TARGET_CONFIGURE_OPTS) ARCH=$(KERNEL_ARCH) \
-	PATH=$(TARGET_PATH) INSTALL_MOD_PATH=$(TARGET_DIR) \
-	CROSS_COMPILE=$(KERNEL_CROSS)
-
-
-
-
-$(DL_DIR)/$(LINUX26_SOURCE):
-	 $(WGET) -P $(DL_DIR) $(LINUX26_SITE)/$(LINUX26_SOURCE)
-
-$(LINUX26_DIR)/.unpacked: $(DL_DIR)/$(LINUX26_SOURCE)
-	rm -rf $(LINUX26_DIR)
-	bzcat $(DL_DIR)/$(LINUX26_SOURCE) | tar -C $(BUILD_DIR) -xvf -
-ifneq ($(DOWNLOAD_LINUX26_VERSION),$(LINUX26_VERSION))
-	# Rename the dir from the downloaded version to the AFTER patch version
-	mv -f $(BUILD_DIR)/linux-$(DOWNLOAD_LINUX26_VERSION) $(BUILD_DIR)/linux-$(LINUX26_VERSION)
-endif
-	touch $(LINUX26_DIR)/.unpacked
-
-$(LINUX26_KCONFIG):
-	@if [ ! -f "$(LINUX26_KCONFIG)" ] ; then \
-		echo ""; \
-		echo "You should create a .config for your kernel"; \
-		echo "and install it as $(LINUX26_KCONFIG)"; \
-		echo ""; \
-		sleep 5; \
-	fi;
-
-$(LINUX26_DIR)/.patched: $(LINUX26_DIR)/.unpacked
-	#toolchain/patch-kernel.sh $(LINUX26_DIR) $(LINUX26_PATCH_DIR)
-	touch $(LINUX26_DIR)/.patched
-
-$(LINUX26_DIR)/.configured:  $(LINUX26_DIR)/.patched  $(LINUX26_KCONFIG)
-	-cp $(LINUX26_KCONFIG) $(LINUX26_DIR)/.config
-	$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) oldconfig
-	touch $(LINUX26_DIR)/.configured
-
-linux26-menuconfig: $(LINUX26_DIR)/.patched
-	[ -f $(LINUX26_DIR)/.config ] || cp $(LINUX26_KCONFIG) $(LINUX26_DIR)/.config
-	$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) menuconfig
-	-[ -f $(LINUX26_DIR)/.config ] && touch $(LINUX26_DIR)/.configured
-
-$(LINUX26_DIR)/.depend_done:  $(LINUX26_DIR)/.configured
-	$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) prepare
-	touch $(LINUX26_DIR)/.depend_done
-
-$(LINUX26_KERNEL): $(LINUX26_DIR)/.depend_done
-	$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) $(LINUX26_FORMAT) bzImage
-	$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) modules
-	cp -fa $(LINUX26_DIR)/$(LINUX26_BINLOC) $(LINUX26_KERNEL)
-	touch -c $(LINUX26_KERNEL)
-
-$(TARGET_DIR)/boot/$(LINUX26_BINLOC): $(LINUX26_KERNEL)
-	[ -d $(TARGET_DIR)/boot/ ] || mkdir $(TARGET_DIR)/boot
-	cp -a $(LINUX26_DIR)/$(LINUX26_BINLOC) $(LINUX26_DIR)/System.map $(TARGET_DIR)/boot/
-	touch -c $(TARGET_DIR)/boot/$(LINUX26_BINLOC)
-
-$(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)/modules.dep: $(LINUX26_KERNEL)
-	rm -rf $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)
-	rm -f $(TARGET_DIR)/sbin/cardmgr
-	$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) \
-		DEPMOD=$(STAGING_DIR)/bin/$(GNU_TARGET_NAME)-depmod \
-		INSTALL_MOD_PATH=$(TARGET_DIR) modules_install
-	rm -f $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)/build
-	touch -c $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)/modules.dep
-
-linux26: cross-depmod26 $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)/modules.dep
-
-linux26-source: $(DL_DIR)/$(LINUX26_SOURCE)
-
-# This has been renamed so we do _NOT_ by default run this on 'make clean'
-linux26clean:
-	rm -f $(LINUX26_KERNEL)
-	-$(MAKE) PATH=$(TARGET_PATH) -C $(LINUX26_DIR) clean
-
-linux26-dirclean:
-	rm -rf $(LINUX26_DIR)
-
-endif
diff --git a/target/device/x86/i386/linux26.mk b/target/device/x86/i386/linux26.mk
new file mode 100644
index 0000000000..af872b41b9
--- /dev/null
+++ b/target/device/x86/i386/linux26.mk
@@ -0,0 +1,114 @@
+#############################################################
+#
+# Linux kernel 2.6 target
+#
+#############################################################
+ifneq ($(filter $(TARGETS),linux26),)
+
+
+# Version of Linux to download and then apply patches to
+DOWNLOAD_LINUX26_VERSION=2.6.19.1
+# Version of Linux after applying any patches
+LINUX26_VERSION=2.6.19.1
+
+
+
+LINUX26_SOURCE=linux-$(DOWNLOAD_LINUX26_VERSION).tar.bz2
+LINUX26_SITE=http://ftp.kernel.org/pub/linux/kernel/v2.6
+
+#LINUX26_FORMAT=vmlinux
+#LINUX26_BINLOC=$(LINUX26_FORMAT)
+LINUX26_FORMAT=bzImage
+LINUX26_BINLOC=arch/i386/boot/$(LINUX26_FORMAT)
+
+# Linux kernel configuration file
+LINUX26_KCONFIG=$(X86_I386_PATH)/linux26.config
+
+# File name for the Linux kernel binary
+LINUX26_KERNEL=linux-kernel-$(LINUX26_VERSION)-$(KERNEL_ARCH)
+
+# Version of Linux AFTER patches
+LINUX26_DIR=$(BUILD_DIR)/linux-$(LINUX26_VERSION)
+
+# kernel patches
+LINUX26_PATCH_DIR=target/device/x86/i386/kernel-patches/
+
+LINUX26_MAKE_FLAGS = $(TARGET_CONFIGURE_OPTS) ARCH=$(KERNEL_ARCH) \
+	PATH=$(TARGET_PATH) INSTALL_MOD_PATH=$(TARGET_DIR) \
+	CROSS_COMPILE=$(KERNEL_CROSS)
+
+
+
+
+$(DL_DIR)/$(LINUX26_SOURCE):
+	 $(WGET) -P $(DL_DIR) $(LINUX26_SITE)/$(LINUX26_SOURCE)
+
+$(LINUX26_DIR)/.unpacked: $(DL_DIR)/$(LINUX26_SOURCE)
+	rm -rf $(LINUX26_DIR)
+	bzcat $(DL_DIR)/$(LINUX26_SOURCE) | tar -C $(BUILD_DIR) -xvf -
+ifneq ($(DOWNLOAD_LINUX26_VERSION),$(LINUX26_VERSION))
+	# Rename the dir from the downloaded version to the AFTER patch version
+	mv -f $(BUILD_DIR)/linux-$(DOWNLOAD_LINUX26_VERSION) $(BUILD_DIR)/linux-$(LINUX26_VERSION)
+endif
+	touch $(LINUX26_DIR)/.unpacked
+
+$(LINUX26_KCONFIG):
+	@if [ ! -f "$(LINUX26_KCONFIG)" ] ; then \
+		echo ""; \
+		echo "You should create a .config for your kernel"; \
+		echo "and install it as $(LINUX26_KCONFIG)"; \
+		echo ""; \
+		sleep 5; \
+	fi;
+
+$(LINUX26_DIR)/.patched: $(LINUX26_DIR)/.unpacked
+	#toolchain/patch-kernel.sh $(LINUX26_DIR) $(LINUX26_PATCH_DIR)
+	touch $(LINUX26_DIR)/.patched
+
+$(LINUX26_DIR)/.configured:  $(LINUX26_DIR)/.patched  $(LINUX26_KCONFIG)
+	-cp $(LINUX26_KCONFIG) $(LINUX26_DIR)/.config
+	$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) oldconfig
+	touch $(LINUX26_DIR)/.configured
+
+linux26-menuconfig: $(LINUX26_DIR)/.patched
+	[ -f $(LINUX26_DIR)/.config ] || cp $(LINUX26_KCONFIG) $(LINUX26_DIR)/.config
+	$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) menuconfig
+	-[ -f $(LINUX26_DIR)/.config ] && touch $(LINUX26_DIR)/.configured
+
+$(LINUX26_DIR)/.depend_done:  $(LINUX26_DIR)/.configured
+	$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) prepare
+	touch $(LINUX26_DIR)/.depend_done
+
+$(LINUX26_KERNEL): $(LINUX26_DIR)/.depend_done
+	$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) $(LINUX26_FORMAT) bzImage
+	$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) modules
+	cp -fa $(LINUX26_DIR)/$(LINUX26_BINLOC) $(LINUX26_KERNEL)
+	touch -c $(LINUX26_KERNEL)
+
+$(TARGET_DIR)/boot/$(LINUX26_BINLOC): $(LINUX26_KERNEL)
+	[ -d $(TARGET_DIR)/boot/ ] || mkdir $(TARGET_DIR)/boot
+	cp -a $(LINUX26_DIR)/$(LINUX26_BINLOC) $(LINUX26_DIR)/System.map $(TARGET_DIR)/boot/
+	touch -c $(TARGET_DIR)/boot/$(LINUX26_BINLOC)
+
+$(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)/modules.dep: $(LINUX26_KERNEL)
+	rm -rf $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)
+	rm -f $(TARGET_DIR)/sbin/cardmgr
+	$(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) \
+		DEPMOD=$(STAGING_DIR)/bin/$(GNU_TARGET_NAME)-depmod \
+		INSTALL_MOD_PATH=$(TARGET_DIR) modules_install
+	rm -f $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)/build
+	touch -c $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)/modules.dep
+
+linux26: cross-depmod26 $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION)/modules.dep
+
+linux26-source: $(DL_DIR)/$(LINUX26_SOURCE)
+
+# This has been renamed so we do _NOT_ by default run this on 'make clean'
+linux26clean:
+	rm -f $(LINUX26_KERNEL)
+	-$(MAKE) PATH=$(TARGET_PATH) -C $(LINUX26_DIR) clean
+
+linux26-dirclean:
+	rm -rf $(LINUX26_DIR)
+
+endif