From: Stan Shebs Date: Sat, 30 Apr 1994 00:04:43 +0000 (+0000) Subject: Fri Apr 29 15:56:18 1994 Stan Shebs (shebs@andros.cygnus.com) X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=0c4b30ea7436d03777b85c86f0de8b970009844d;p=binutils-gdb.git Fri Apr 29 15:56:18 1994 Stan Shebs (shebs@andros.cygnus.com) * xcoffexec.c: Reformat to standards and lint. (language.h): Include. (exec_close): Declare arg "quitting". (file_command): Declare arg "from_tty". (map_vmap): Cast xmalloc result to PTR. * rs6000-nat.c: Reformat to standards and lint. (exec_one_dummy_insn): Use char array for saved instruction. (fixup_breakpoints): Declare. (vmap_ldinfo): Be more informative in fatal error messages. (xcoff_relocate_symtab): Define to return void. * xcoffsolib.h: Reformat to standards, improve comments. * config/rs6000/nm-rs6000.h (xcoff_relocate_symtab): Declare. --- diff --git a/gdb/ChangeLog b/gdb/ChangeLog index 05bb47bfe5d..23ab19a2e4e 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,3 +1,18 @@ +Fri Apr 29 15:56:18 1994 Stan Shebs (shebs@andros.cygnus.com) + + * xcoffexec.c: Reformat to standards and lint. + (language.h): Include. + (exec_close): Declare arg "quitting". + (file_command): Declare arg "from_tty". + (map_vmap): Cast xmalloc result to PTR. + * rs6000-nat.c: Reformat to standards and lint. + (exec_one_dummy_insn): Use char array for saved instruction. + (fixup_breakpoints): Declare. + (vmap_ldinfo): Be more informative in fatal error messages. + (xcoff_relocate_symtab): Define to return void. + * xcoffsolib.h: Reformat to standards, improve comments. + * config/rs6000/nm-rs6000.h (xcoff_relocate_symtab): Declare. + Thu Apr 28 08:40:56 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * utils.c, defs.h (error_begin): New function. diff --git a/gdb/rs6000-nat.c b/gdb/rs6000-nat.c index 3da0c016505..e3d626f58a9 100644 --- a/gdb/rs6000-nat.c +++ b/gdb/rs6000-nat.c @@ -1,5 +1,5 @@ /* IBM RS/6000 native-dependent code for GDB, the GNU debugger. - Copyright 1986, 1987, 1989, 1991, 1992 Free Software Foundation, Inc. + Copyright 1986, 1987, 1989, 1991, 1992, 1994 Free Software Foundation, Inc. This file is part of GDB. @@ -44,6 +44,7 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include extern int errno; + extern struct vmap * map_vmap PARAMS ((bfd *bf, bfd *arch)); extern struct target_ops exec_ops; @@ -54,6 +55,9 @@ exec_one_dummy_insn PARAMS ((void)); extern void add_text_to_loadinfo PARAMS ((CORE_ADDR textaddr, CORE_ADDR dataaddr)); +extern void +fixup_breakpoints PARAMS ((CORE_ADDR low, CORE_ADDR high, CORE_ADDR delta)); + /* Conversion from gdb-to-system special purpose register numbers.. */ static int special_regs[] = { @@ -85,7 +89,7 @@ fetch_inferior_registers (regno) for (ii=0; ii < 32; ++ii) ptrace (PT_READ_FPR, inferior_pid, - (PTRACE_ARG3_TYPE) ®isters [REGISTER_BYTE (FP0_REGNUM+ii)], + (PTRACE_ARG3_TYPE) ®isters [REGISTER_BYTE (FP0_REGNUM+ii)], FPR0+ii, 0); /* read special registers. */ @@ -106,7 +110,7 @@ fetch_inferior_registers (regno) } else if (regno <= FPLAST_REGNUM) { /* a FPR */ ptrace (PT_READ_FPR, inferior_pid, - (PTRACE_ARG3_TYPE) ®isters [REGISTER_BYTE (regno)], + (PTRACE_ARG3_TYPE) ®isters [REGISTER_BYTE (regno)], (regno-FP0_REGNUM+FPR0), 0); } else if (regno <= LAST_SP_REGNUM) { /* a special register */ @@ -132,7 +136,8 @@ store_inferior_registers (regno) errno = 0; - if (regno == -1) { /* for all registers.. */ + if (regno == -1) + { /* for all registers.. */ int ii; /* execute one dummy instruction (which is a breakpoint) in inferior @@ -143,79 +148,92 @@ store_inferior_registers (regno) exec_one_dummy_insn (); /* write general purpose registers first! */ - for ( ii=GPR0; ii<=GPR31; ++ii) { - ptrace (PT_WRITE_GPR, inferior_pid, (PTRACE_ARG3_TYPE) ii, - *(int*)®isters[REGISTER_BYTE (ii)], 0); - if ( errno ) { - perror ("ptrace write_gpr"); errno = 0; + for ( ii=GPR0; ii<=GPR31; ++ii) + { + ptrace (PT_WRITE_GPR, inferior_pid, (PTRACE_ARG3_TYPE) ii, + *(int*)®isters[REGISTER_BYTE (ii)], 0); + if (errno) + { + perror ("ptrace write_gpr"); + errno = 0; + } } - } /* write floating point registers now. */ - for ( ii=0; ii < 32; ++ii) { - ptrace (PT_WRITE_FPR, inferior_pid, + for ( ii=0; ii < 32; ++ii) + { + ptrace (PT_WRITE_FPR, inferior_pid, (PTRACE_ARG3_TYPE) ®isters[REGISTER_BYTE (FP0_REGNUM+ii)], - FPR0+ii, 0); - if ( errno ) { - perror ("ptrace write_fpr"); errno = 0; - } - } + FPR0+ii, 0); + if (errno) + { + perror ("ptrace write_fpr"); + errno = 0; + } + } /* write special registers. */ - for (ii=0; ii <= LAST_SP_REGNUM-FIRST_SP_REGNUM; ++ii) { - ptrace (PT_WRITE_GPR, inferior_pid, - (PTRACE_ARG3_TYPE) special_regs[ii], - *(int*)®isters[REGISTER_BYTE (FIRST_SP_REGNUM+ii)], 0); - if ( errno ) { - perror ("ptrace write_gpr"); errno = 0; + for (ii=0; ii <= LAST_SP_REGNUM-FIRST_SP_REGNUM; ++ii) + { + ptrace (PT_WRITE_GPR, inferior_pid, + (PTRACE_ARG3_TYPE) special_regs[ii], + *(int*)®isters[REGISTER_BYTE (FIRST_SP_REGNUM+ii)], 0); + if (errno) + { + perror ("ptrace write_gpr"); + errno = 0; + } } - } - } + } /* else, a specific register number is given... */ - else if (regno < FP0_REGNUM) { /* a GPR */ - - ptrace (PT_WRITE_GPR, inferior_pid, (PTRACE_ARG3_TYPE) regno, - *(int*)®isters[REGISTER_BYTE (regno)], 0); - } - - else if (regno <= FPLAST_REGNUM) { /* a FPR */ - ptrace (PT_WRITE_FPR, inferior_pid, - (PTRACE_ARG3_TYPE) ®isters[REGISTER_BYTE (regno)], - regno-FP0_REGNUM+FPR0, 0); - } + else if (regno < FP0_REGNUM) /* a GPR */ + { + ptrace (PT_WRITE_GPR, inferior_pid, (PTRACE_ARG3_TYPE) regno, + *(int*)®isters[REGISTER_BYTE (regno)], 0); + } - else if (regno <= LAST_SP_REGNUM) { /* a special register */ + else if (regno <= FPLAST_REGNUM) /* a FPR */ + { + ptrace (PT_WRITE_FPR, inferior_pid, + (PTRACE_ARG3_TYPE) ®isters[REGISTER_BYTE (regno)], + regno - FP0_REGNUM + FPR0, 0); + } - ptrace (PT_WRITE_GPR, inferior_pid, - (PTRACE_ARG3_TYPE) special_regs [regno-FIRST_SP_REGNUM], - *(int*)®isters[REGISTER_BYTE (regno)], 0); - } + else if (regno <= LAST_SP_REGNUM) /* a special register */ + { + ptrace (PT_WRITE_GPR, inferior_pid, + (PTRACE_ARG3_TYPE) special_regs [regno-FIRST_SP_REGNUM], + *(int*)®isters[REGISTER_BYTE (regno)], 0); + } else fprintf_unfiltered (gdb_stderr, "Gdb error: register no %d not implemented.\n", regno); - if ( errno ) { - perror ("ptrace write"); errno = 0; - } + if (errno) + { + perror ("ptrace write"); + errno = 0; + } } /* Execute one dummy breakpoint instruction. This way we give the kernel a chance to do some housekeeping and update inferior's internal data, including u_area. */ + static void exec_one_dummy_insn () { #define DUMMY_INSN_ADDR (TEXT_SEGMENT_BASE)+0x200 - unsigned long shadow; + char shadow_contents[BREAKPOINT_MAX]; /* Stash old bkpt addr contents */ unsigned int status, pid; /* We plant one dummy breakpoint into DUMMY_INSN_ADDR address. We assume that this address will never be executed again by the real code. */ - target_insert_breakpoint (DUMMY_INSN_ADDR, &shadow); + target_insert_breakpoint (DUMMY_INSN_ADDR, shadow_contents); errno = 0; ptrace (PT_CONTINUE, inferior_pid, (PTRACE_ARG3_TYPE) DUMMY_INSN_ADDR, 0, 0); @@ -226,7 +244,7 @@ exec_one_dummy_insn () pid = wait (&status); } while (pid != inferior_pid); - target_remove_breakpoint (DUMMY_INSN_ADDR, &shadow); + target_remove_breakpoint (DUMMY_INSN_ADDR, shadow_contents); } void @@ -238,19 +256,19 @@ fetch_core_registers (core_reg_sect, core_reg_size, which, reg_addr) { /* fetch GPRs and special registers from the first register section in core bfd. */ - if (which == 0) { - - /* copy GPRs first. */ - memcpy (registers, core_reg_sect, 32 * 4); - - /* gdb's internal register template and bfd's register section layout - should share a common include file. FIXMEmgo */ - /* then comes special registes. They are supposed to be in the same - order in gdb template and bfd `.reg' section. */ - core_reg_sect += (32 * 4); - memcpy (®isters [REGISTER_BYTE (FIRST_SP_REGNUM)], core_reg_sect, - (LAST_SP_REGNUM - FIRST_SP_REGNUM + 1) * 4); - } + if (which == 0) + { + /* copy GPRs first. */ + memcpy (registers, core_reg_sect, 32 * 4); + + /* gdb's internal register template and bfd's register section layout + should share a common include file. FIXMEmgo */ + /* then comes special registes. They are supposed to be in the same + order in gdb template and bfd `.reg' section. */ + core_reg_sect += (32 * 4); + memcpy (®isters [REGISTER_BYTE (FIRST_SP_REGNUM)], core_reg_sect, + (LAST_SP_REGNUM - FIRST_SP_REGNUM + 1) * 4); + } /* fetch floating point registers from register section 2 in core bfd. */ else if (which == 2) @@ -260,7 +278,7 @@ fetch_core_registers (core_reg_sect, core_reg_size, which, reg_addr) fprintf_unfiltered (gdb_stderr, "Gdb error: unknown parameter to fetch_core_registers().\n"); } -/* vmap_symtab - handle symbol translation on vmapping */ +/* handle symbol translation on vmapping */ static void vmap_symtab (vp) @@ -339,11 +357,13 @@ vmap_symtab (vp) } /* Add symbols for an objfile. */ + static int objfile_symbol_add (arg) char *arg; { struct objfile *obj = (struct objfile *) arg; + syms_from_objfile (obj, 0, 0, 0); new_symfile_objfile (obj, 0, 0); return 1; @@ -355,94 +375,92 @@ objfile_symbol_add (arg) core file), the caller should set it to -1, and we will open the file. Return the vmap new entry. */ + static struct vmap * -add_vmap(ldi) +add_vmap (ldi) register struct ld_info *ldi; { - bfd *abfd, *last; - register char *mem, *objname; - struct objfile *obj; - struct vmap *vp; - - /* This ldi structure was allocated using alloca() in - xcoff_relocate_symtab(). Now we need to have persistent object - and member names, so we should save them. */ - - mem = ldi->ldinfo_filename + strlen(ldi->ldinfo_filename) + 1; - mem = savestring (mem, strlen (mem)); - objname = savestring (ldi->ldinfo_filename, strlen (ldi->ldinfo_filename)); - - if (ldi->ldinfo_fd < 0) - /* Note that this opens it once for every member; a possible - enhancement would be to only open it once for every object. */ - abfd = bfd_openr (objname, gnutarget); - else - abfd = bfd_fdopenr(objname, gnutarget, ldi->ldinfo_fd); - if (!abfd) - error("Could not open `%s' as an executable file: %s", - objname, bfd_errmsg(bfd_get_error ())); - - - /* make sure we have an object file */ - - if (bfd_check_format(abfd, bfd_object)) - vp = map_vmap (abfd, 0); - - else if (bfd_check_format(abfd, bfd_archive)) { - last = 0; - /* - * FIXME??? am I tossing BFDs? bfd? - */ - while (last = bfd_openr_next_archived_file(abfd, last)) - if (STREQ(mem, last->filename)) - break; - - if (!last) { - bfd_close(abfd); - /* FIXME -- should be error */ - warning("\"%s\": member \"%s\" missing.", abfd->filename, mem); - return; - } - - if (!bfd_check_format(last, bfd_object)) { - bfd_close(last); /* XXX??? */ - goto obj_err; - } - - vp = map_vmap (last, abfd); + bfd *abfd, *last; + register char *mem, *objname; + struct objfile *obj; + struct vmap *vp; + + /* This ldi structure was allocated using alloca() in + xcoff_relocate_symtab(). Now we need to have persistent object + and member names, so we should save them. */ + + mem = ldi->ldinfo_filename + strlen (ldi->ldinfo_filename) + 1; + mem = savestring (mem, strlen (mem)); + objname = savestring (ldi->ldinfo_filename, strlen (ldi->ldinfo_filename)); + + if (ldi->ldinfo_fd < 0) + /* Note that this opens it once for every member; a possible + enhancement would be to only open it once for every object. */ + abfd = bfd_openr (objname, gnutarget); + else + abfd = bfd_fdopenr (objname, gnutarget, ldi->ldinfo_fd); + if (!abfd) + error ("Could not open `%s' as an executable file: %s", + objname, bfd_errmsg (bfd_get_error ())); + + /* make sure we have an object file */ + + if (bfd_check_format (abfd, bfd_object)) + vp = map_vmap (abfd, 0); + + else if (bfd_check_format (abfd, bfd_archive)) + { + last = 0; + /* FIXME??? am I tossing BFDs? bfd? */ + while ((last = bfd_openr_next_archived_file (abfd, last))) + if (STREQ (mem, last->filename)) + break; + + if (!last) + { + bfd_close (abfd); + /* FIXME -- should be error */ + warning ("\"%s\": member \"%s\" missing.", abfd->filename, mem); + return; } - else { - obj_err: - bfd_close(abfd); - error ("\"%s\": not in executable format: %s.", - objname, bfd_errmsg(bfd_get_error ())); - /*NOTREACHED*/ + + if (!bfd_check_format(last, bfd_object)) + { + bfd_close (last); /* XXX??? */ + goto obj_err; } - obj = allocate_objfile (vp->bfd, 0); - vp->objfile = obj; + + vp = map_vmap (last, abfd); + } + else + { + obj_err: + bfd_close (abfd); + error ("\"%s\": not in executable format: %s.", + objname, bfd_errmsg (bfd_get_error ())); + /*NOTREACHED*/ + } + obj = allocate_objfile (vp->bfd, 0); + vp->objfile = obj; #ifndef SOLIB_SYMBOLS_MANUAL - if (catch_errors (objfile_symbol_add, (char *)obj, - "Error while reading shared library symbols:\n", - RETURN_MASK_ALL)) - { - /* Note this is only done if symbol reading was successful. */ - vmap_symtab (vp); - vp->loaded = 1; - } + if (catch_errors (objfile_symbol_add, (char *)obj, + "Error while reading shared library symbols:\n", + RETURN_MASK_ALL)) + { + /* Note this is only done if symbol reading was successful. */ + vmap_symtab (vp); + vp->loaded = 1; + } #endif - return vp; + return vp; } -/* - * vmap_ldinfo - update VMAP info with ldinfo() information - * - * Input: - * ldi - ^ to ldinfo() results. - */ +/* update VMAP info with ldinfo() information + Input is ptr to ldinfo() results. */ static void -vmap_ldinfo(ldi) +vmap_ldinfo (ldi) register struct ld_info *ldi; { struct stat ii, vi; @@ -450,80 +468,80 @@ vmap_ldinfo(ldi) register got_one, retried; CORE_ADDR ostart; - /* - * for each *ldi, see if we have a corresponding *vp - * if so, update the mapping, and symbol table. - * if not, add an entry and symbol table. - */ - do { - char *name = ldi->ldinfo_filename; - char *memb = name + strlen(name) + 1; + /* For each *ldi, see if we have a corresponding *vp. + If so, update the mapping, and symbol table. + If not, add an entry and symbol table. */ - retried = 0; + do { + char *name = ldi->ldinfo_filename; + char *memb = name + strlen(name) + 1; - if (fstat(ldi->ldinfo_fd, &ii) < 0) - fatal("cannot fstat(%d) on %s" - , ldi->ldinfo_fd - , name); -retry: - for (got_one = 0, vp = vmap; vp; vp = vp->nxt) { - FILE *io; + retried = 0; - /* First try to find a `vp', which is the same as in ldinfo. - If not the same, just continue and grep the next `vp'. If same, - relocate its tstart, tend, dstart, dend values. If no such `vp' - found, get out of this for loop, add this ldi entry as a new vmap - (add_vmap) and come back, fins its `vp' and so on... */ + if (fstat (ldi->ldinfo_fd, &ii) < 0) + fatal ("cannot fstat(fd=%d) on %s", ldi->ldinfo_fd, name); + retry: + for (got_one = 0, vp = vmap; vp; vp = vp->nxt) + { + FILE *io; - /* The filenames are not always sufficient to match on. */ + /* First try to find a `vp', which is the same as in ldinfo. + If not the same, just continue and grep the next `vp'. If same, + relocate its tstart, tend, dstart, dend values. If no such `vp' + found, get out of this for loop, add this ldi entry as a new vmap + (add_vmap) and come back, fins its `vp' and so on... */ - if ((name[0] == '/' && !STREQ(name, vp->name)) - || (memb[0] && !STREQ(memb, vp->member))) - continue; + /* The filenames are not always sufficient to match on. */ - io = bfd_cache_lookup(vp->bfd); /* totally opaque! */ - if (!io) - fatal("cannot find BFD's iostream for %s", vp->name); + if ((name[0] == '/' && !STREQ(name, vp->name)) + || (memb[0] && !STREQ(memb, vp->member))) + continue; - /* see if we are referring to the same file */ + io = bfd_cache_lookup (vp->bfd); /* totally opaque! */ + if (!io) + fatal ("cannot find BFD's iostream for %s", vp->name); - if (fstat(fileno(io), &vi) < 0) - fatal("cannot fstat BFD for %s", vp->name); + /* See if we are referring to the same file. */ + if (fstat (fileno(io), &vi) < 0) + fatal ("cannot fstat(fd=%d) the BFD for %s (errno=%d)", + fileno(io), vp->name, errno); - if (ii.st_dev != vi.st_dev || ii.st_ino != vi.st_ino) - continue; + if (ii.st_dev != vi.st_dev || ii.st_ino != vi.st_ino) + continue; - if (!retried) - close(ldi->ldinfo_fd); + if (!retried) + close (ldi->ldinfo_fd); - ++got_one; + ++got_one; - /* found a corresponding VMAP. remap! */ - ostart = vp->tstart; + /* found a corresponding VMAP. remap! */ + ostart = vp->tstart; - /* We can assume pointer == CORE_ADDR, this code is native only. */ - vp->tstart = (CORE_ADDR) ldi->ldinfo_textorg; - vp->tend = vp->tstart + ldi->ldinfo_textsize; - vp->dstart = (CORE_ADDR) ldi->ldinfo_dataorg; - vp->dend = vp->dstart + ldi->ldinfo_datasize; + /* We can assume pointer == CORE_ADDR, this code is native only. */ + vp->tstart = (CORE_ADDR) ldi->ldinfo_textorg; + vp->tend = vp->tstart + ldi->ldinfo_textsize; + vp->dstart = (CORE_ADDR) ldi->ldinfo_dataorg; + vp->dend = vp->dstart + ldi->ldinfo_datasize; - if (vp->tadj) { + if (vp->tadj) + { vp->tstart += vp->tadj; vp->tend += vp->tadj; } - /* relocate symbol table(s). */ - vmap_symtab (vp); + /* relocate symbol table(s). */ + vmap_symtab (vp); - /* there may be more, so we don't break out of the loop. */ - } + /* there may be more, so we don't break out of the loop. */ + } - /* if there was no matching *vp, we must perforce create the sucker(s) */ - if (!got_one && !retried) { - add_vmap(ldi); - ++retried; - goto retry; - } + /* if there was no matching *vp, we must perforce create the sucker(s) */ + if (!got_one && !retried) + { + add_vmap (ldi); + ++retried; + goto retry; + } } while (ldi->ldinfo_next && (ldi = (void *) (ldi->ldinfo_next + (char *) ldi))); @@ -571,40 +589,38 @@ vmap_exec () /* xcoff_relocate_symtab - hook for symbol table relocation. also reads shared libraries.. */ +void xcoff_relocate_symtab (pid) -unsigned int pid; + unsigned int pid; { #define MAX_LOAD_SEGS 64 /* maximum number of load segments */ - struct ld_info *ldi; - int temp; + struct ld_info *ldi; - ldi = (void *) alloca(MAX_LOAD_SEGS * sizeof (*ldi)); + ldi = (void *) alloca(MAX_LOAD_SEGS * sizeof (*ldi)); - /* According to my humble theory, AIX has some timing problems and - when the user stack grows, kernel doesn't update stack info in time - and ptrace calls step on user stack. That is why we sleep here a little, - and give kernel to update its internals. */ + /* According to my humble theory, AIX has some timing problems and + when the user stack grows, kernel doesn't update stack info in time + and ptrace calls step on user stack. That is why we sleep here a little, + and give kernel to update its internals. */ - usleep (36000); + usleep (36000); - errno = 0; - ptrace(PT_LDINFO, pid, (PTRACE_ARG3_TYPE) ldi, - MAX_LOAD_SEGS * sizeof(*ldi), ldi); - if (errno) { - perror_with_name ("ptrace ldinfo"); - return 0; - } + errno = 0; + ptrace (PT_LDINFO, pid, (PTRACE_ARG3_TYPE) ldi, + MAX_LOAD_SEGS * sizeof(*ldi), ldi); + if (errno) + perror_with_name ("ptrace ldinfo"); - vmap_ldinfo(ldi); + vmap_ldinfo (ldi); - do { - /* We are allowed to assume CORE_ADDR == pointer. This code is - native only. */ - add_text_to_loadinfo ((CORE_ADDR) ldi->ldinfo_textorg, - (CORE_ADDR) ldi->ldinfo_dataorg); - } while (ldi->ldinfo_next - && (ldi = (void *) (ldi->ldinfo_next + (char *) ldi))); + do { + /* We are allowed to assume CORE_ADDR == pointer. This code is + native only. */ + add_text_to_loadinfo ((CORE_ADDR) ldi->ldinfo_textorg, + (CORE_ADDR) ldi->ldinfo_dataorg); + } while (ldi->ldinfo_next + && (ldi = (void *) (ldi->ldinfo_next + (char *) ldi))); #if 0 /* Now that we've jumbled things around, re-sort them. */ @@ -619,6 +635,7 @@ unsigned int pid; /* Relocate symtabs and read in shared library info, based on symbols from the core file. */ + void xcoff_relocate_core () { @@ -649,7 +666,7 @@ xcoff_relocate_core () ldinfo_sec = bfd_get_section_by_name (core_bfd, ".ldinfo"); if (ldinfo_sec == NULL) { -bfd_err: + bfd_err: fprintf_filtered (gdb_stderr, "Couldn't get ldinfo from core file: %s\n", bfd_errmsg (bfd_get_error ())); do_cleanups (old); @@ -681,7 +698,7 @@ bfd_err: ++names_found; } while (names_found < 2); - ldip = (struct ld_info *)buffer; + ldip = (struct ld_info *) buffer; /* Can't use a file descriptor from the core file; need to open it. */ ldip->ldinfo_fd = -1; diff --git a/gdb/xcoffexec.c b/gdb/xcoffexec.c index 2d57f928201..1562b7b1463 100644 --- a/gdb/xcoffexec.c +++ b/gdb/xcoffexec.c @@ -1,5 +1,5 @@ /* Execute AIXcoff files, for GDB. - Copyright 1988, 1989, 1991, 1992 Free Software Foundation, Inc. + Copyright 1988, 1989, 1991, 1992, 1994 Free Software Foundation, Inc. Derived from exec.c. Modified by IBM Corporation. Donated by IBM Corporation and Cygnus Support. @@ -35,6 +35,7 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include "target.h" #include "gdbcmd.h" #include "gdbcore.h" +#include "language.h" #include "symfile.h" #include "objfiles.h" @@ -74,14 +75,15 @@ extern struct target_ops exec_ops; /* exec_close - done with exec file, clean up all resources. */ static void -exec_close(quitting) +exec_close (quitting) +int quitting; { register struct vmap *vp, *nxt; - struct objfile *obj; int need_symtab_cleanup = 0; - for (nxt = vmap; vp = nxt; ) + for (nxt = vmap; nxt; ) { + vp = nxt; nxt = vp->nxt; /* if there is an objfile associated with this bfd, @@ -93,13 +95,13 @@ exec_close(quitting) need_symtab_cleanup = 1; } else - bfd_close(vp->bfd); + bfd_close (vp->bfd); /* FIXME: This routine is #if 0'd in symfile.c. What should we be doing here? Should we just free everything in vp->objfile->symtabs? Should free_objfile do that? */ - free_named_symtabs(vp->name); - free(vp); + free_named_symtabs (vp->name); + free (vp); } vmap = 0; @@ -107,28 +109,32 @@ exec_close(quitting) /* exec_bfd was already closed (the exec file has a vmap entry). */ exec_bfd = NULL; - if (exec_ops.to_sections) { - free (exec_ops.to_sections); - exec_ops.to_sections = NULL; - exec_ops.to_sections_end = NULL; - } + if (exec_ops.to_sections) + { + free (exec_ops.to_sections); + exec_ops.to_sections = NULL; + exec_ops.to_sections_end = NULL; + } if (need_symtab_cleanup) clear_symtab_users (); } -/* - * exec_file_command - handle the "exec" command, &c. - */ +/* Process the first arg in ARGS as the new exec file. + + Note that we have to explicitly ignore additional args, since we can + be called from file_command(), which also calls symbol_file_command() + which can take multiple args. */ + void exec_file_command (filename, from_tty) char *filename; int from_tty; { - target_preopen(from_tty); + target_preopen (from_tty); /* Remove any previous exec file. */ - unpush_target(&exec_ops); + unpush_target (&exec_ops); /* Now open and digest the file the user requested, if any. */ @@ -137,32 +143,32 @@ exec_file_command (filename, from_tty) char *scratch_pathname; int scratch_chan; - filename = tilde_expand(filename); + filename = tilde_expand (filename); make_cleanup (free, filename); - scratch_chan = openp(getenv("PATH"), 1, filename, - write_files? O_RDWR: O_RDONLY, 0, - &scratch_pathname); + scratch_chan = openp (getenv ("PATH"), 1, filename, + write_files? O_RDWR: O_RDONLY, 0, + &scratch_pathname); if (scratch_chan < 0) - perror_with_name(filename); + perror_with_name (filename); - exec_bfd = bfd_fdopenr(scratch_pathname, gnutarget, scratch_chan); + exec_bfd = bfd_fdopenr (scratch_pathname, gnutarget, scratch_chan); if (!exec_bfd) - error("Could not open `%s' as an executable file: %s", - scratch_pathname, bfd_errmsg(bfd_get_error ())); + error ("Could not open `%s' as an executable file: %s", + scratch_pathname, bfd_errmsg(bfd_get_error ())); /* make sure we have an object file */ - if (!bfd_check_format(exec_bfd, bfd_object)) - error("\"%s\": not in executable format: %s.", scratch_pathname, - bfd_errmsg(bfd_get_error ())); + if (!bfd_check_format (exec_bfd, bfd_object)) + error ("\"%s\": not in executable format: %s.", scratch_pathname, + bfd_errmsg (bfd_get_error ())); /* setup initial vmap */ map_vmap (exec_bfd, 0); if (!vmap) - error("Can't find the file sections in `%s': %s", exec_bfd->filename, - bfd_errmsg(bfd_get_error ())); + error ("Can't find the file sections in `%s': %s", exec_bfd->filename, + bfd_errmsg(bfd_get_error ())); if (build_section_table (exec_bfd, &exec_ops.to_sections, &exec_ops.to_sections_end)) @@ -170,33 +176,35 @@ exec_file_command (filename, from_tty) bfd_errmsg (bfd_get_error ())); /* make sure core, if present, matches */ - validate_files(); + validate_files (); push_target(&exec_ops); - /* Tell display code(if any) about the changed file name. */ - + /* Tell display code (if any) about the changed file name. */ if (exec_file_display_hook) - (*exec_file_display_hook)(filename); + (*exec_file_display_hook) (filename); } else { - exec_close(0); /* just in case */ + exec_close (0); /* just in case */ if (from_tty) - printf_unfiltered("No exec file now.\n"); + printf_unfiltered ("No exec file now.\n"); } } /* Set both the exec file and the symbol file, in one command. What a - * novelty. Why did GDB go through four major releases before this - * command was added? - */ -static void -file_command(arg, from_tty) -char *arg; { + novelty. Why did GDB go through four major releases before this + command was added? */ - exec_file_command(arg, from_tty); - symbol_file_command(arg, from_tty); +static void +file_command (arg, from_tty) + char *arg; + int from_tty; +{ + /* FIXME, if we lose on reading the symbol file, we should revert + the exec file, but that's rough. */ + exec_file_command (arg, from_tty); + symbol_file_command (arg, from_tty); } /* Locate all mappable sections of a BFD file. @@ -239,7 +247,7 @@ build_section_table (some_bfd, start, end) free (*start); *start = (struct section_table *) xmalloc (count * sizeof (**start)); *end = *start; - bfd_map_over_sections (some_bfd, add_to_section_table, (char *)end); + bfd_map_over_sections (some_bfd, add_to_section_table, (char *) end); if (*end > *start + count) fatal ("aborting"); /* We could realloc the table, but it probably loses for most files. */ @@ -252,31 +260,29 @@ bfdsec_to_vmap(bf, sect, arg3) sec_ptr sect; PTR arg3; { - struct vmap_and_bfd *vmap_bfd = (struct vmap_and_bfd *)arg3; - register struct vmap *vp, **vpp; - register struct symtab *syms; - bfd *arch = vmap_bfd->pbfd; + struct vmap_and_bfd *vmap_bfd = (struct vmap_and_bfd *) arg3; + register struct vmap *vp; vp = vmap_bfd->pvmap; - if ((bfd_get_section_flags(bf, sect) & SEC_LOAD) == 0) + if ((bfd_get_section_flags (bf, sect) & SEC_LOAD) == 0) return; - if (STREQ(bfd_section_name(bf, sect), ".text")) + if (STREQ(bfd_section_name (bf, sect), ".text")) { vp->tstart = 0; - vp->tend = vp->tstart + bfd_section_size(bf, sect); + vp->tend = vp->tstart + bfd_section_size (bf, sect); /* When it comes to this adjustment value, in contrast to our previous belief shared objects should behave the same as the main load segment. This is the offset from the beginning of text section to the first real instruction. */ - vp->tadj = sect->filepos - bfd_section_vma(bf, sect); + vp->tadj = sect->filepos - bfd_section_vma (bf, sect); } - else if (STREQ(bfd_section_name(bf, sect), ".data")) + else if (STREQ(bfd_section_name (bf, sect), ".data")) { vp->dstart = 0; - vp->dend = vp->dstart + bfd_section_size(bf, sect); + vp->dend = vp->dstart + bfd_section_size (bf, sect); } else if (STREQ(bfd_section_name(bf, sect), ".bss")) /* FIXMEmgo */ printf_unfiltered ("bss section in exec! Don't know what the heck to do!\n"); @@ -292,14 +298,13 @@ map_vmap (bf, arch) { struct vmap_and_bfd vmap_bfd; struct vmap *vp, **vpp; - struct objfile *obj; - vp = (void*) xmalloc (sizeof (*vp)); + vp = (PTR) xmalloc (sizeof (*vp)); memset (vp, '\0', sizeof (*vp)); vp->nxt = 0; vp->bfd = bf; - vp->name = bfd_get_filename(arch ? arch : bf); - vp->member = arch ? bfd_get_filename(bf) : ""; + vp->name = bfd_get_filename (arch ? arch : bf); + vp->member = arch ? bfd_get_filename (bf) : ""; vmap_bfd.pbfd = arch; vmap_bfd.pvmap = vp; @@ -413,7 +418,7 @@ print_section_info (t, abfd) static void exec_files_info (t) - struct target_ops *t; + struct target_ops *t; { register struct vmap *vp = vmap; @@ -422,21 +427,21 @@ exec_files_info (t) if (!vp) return; - printf_unfiltered("\tMapping info for file `%s'.\n", vp->name); + printf_unfiltered ("\tMapping info for file `%s'.\n", vp->name); - printf_unfiltered("\t %8.8s %8.8s %8.8s %8.8s %8.8s %s\n", + printf_unfiltered ("\t %8.8s %8.8s %8.8s %8.8s %8.8s %s\n", "tstart", "tend", "dstart", "dend", "section", "file(member)"); for (; vp; vp = vp->nxt) - printf_unfiltered("\t0x%8.8x 0x%8.8x 0x%8.8x 0x%8.8x %s%s%s%s\n", - vp->tstart, - vp->tend, - vp->dstart, - vp->dend, - vp->name, - *vp->member ? "(" : "", - vp->member, - *vp->member ? ")" : ""); + printf_unfiltered ("\t0x%8.8x 0x%8.8x 0x%8.8x 0x%8.8x %s%s%s%s\n", + vp->tstart, + vp->tend, + vp->dstart, + vp->dend, + vp->name, + *vp->member ? "(" : "", + vp->member, + *vp->member ? ")" : ""); } #ifdef DAMON @@ -510,17 +515,18 @@ set_section_command (args, from_tty) /* Parse out new virtual address */ secaddr = parse_and_eval_address (args); - for (p = exec_ops.to_sections; p < exec_ops.to_sections_end; p++) { + for (p = exec_ops.to_sections; p < exec_ops.to_sections_end; p++) if (!strncmp (secname, bfd_section_name (exec_bfd, p->the_bfd_section), seclen) - && bfd_section_name (exec_bfd, p->the_bfd_section)[seclen] == '\0') { - offset = secaddr - p->addr; - p->addr += offset; - p->endaddr += offset; - if (from_tty) - exec_files_info(&exec_ops); - return; - } - } + && bfd_section_name (exec_bfd, p->the_bfd_section)[seclen] == '\0') + { + offset = secaddr - p->addr; + p->addr += offset; + p->endaddr += offset; + if (from_tty) + exec_files_info (&exec_ops); + return; + } + if (seclen >= sizeof (secprint)) seclen = sizeof (secprint) - 1; strncpy (secprint, secname, seclen); diff --git a/gdb/xcoffsolib.h b/gdb/xcoffsolib.h index 5be35331bad..1f6d7f1f50f 100644 --- a/gdb/xcoffsolib.h +++ b/gdb/xcoffsolib.h @@ -1,5 +1,5 @@ /* Data structures for RS/6000 shared libraries, for GDB. - Copyright 1991, 1992 Free Software Foundation, Inc. + Copyright 1991, 1992, 1994 Free Software Foundation, Inc. This file is part of GDB. @@ -17,31 +17,30 @@ You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -/* - the vmap struct is used to describe the virtual address space of +/* The vmap struct is used to describe the virtual address space of the target we are manipulating. The first entry is always the "exec" file. Subsequent entries correspond to other objects that are mapped into the address space of a process created from the "exec" file. These are either in response to exec()ing the file, in which case all shared libraries are loaded, or a "load" system call, followed by the - user's issuance of a "load" command. */ + user's issuance of a "load" command. */ struct vmap { - struct vmap *nxt; /* ^ to next in chain */ - bfd *bfd; /* BFD for mappable object library */ - char *name; /* ^ to object file name */ - char *member; /* ^ to member name */ - CORE_ADDR tstart; /* virtual addr where member is mapped */ - CORE_ADDR tend; /* virtual upper bound of member */ - CORE_ADDR tadj; /* heuristically derived adjustment */ - CORE_ADDR dstart; /* virtual address of data start */ - CORE_ADDR dend; /* vitrual address of data end */ - - /* This is NULL for the exec-file. */ - struct objfile *objfile; - - unsigned loaded:1; /* True if symbols are loaded */ - unsigned padding:15; + struct vmap *nxt; /* ptr to next in chain */ + bfd *bfd; /* BFD for mappable object library */ + char *name; /* ptr to object file name */ + char *member; /* ptr to member name */ + CORE_ADDR tstart; /* virtual addr where member is mapped */ + CORE_ADDR tend; /* virtual upper bound of member */ + CORE_ADDR tadj; /* heuristically derived adjustment */ + CORE_ADDR dstart; /* virtual address of data start */ + CORE_ADDR dend; /* vitrual address of data end */ + + /* This is NULL for the exec-file. */ + struct objfile *objfile; + + unsigned loaded:1; /* True if symbols are loaded */ + unsigned padding:15; };