From: Eric Andersen <andersen@codepoet.org>
Date: Mon, 12 Apr 2004 21:33:59 +0000 (-0000)
Subject: Due to alphabetizing, the uml stuff was pulled in after uclibc.mk
X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=0da2e559f66924814ef7408cc69fc29ba89fa25e;p=buildroot.git

Due to alphabetizing, the uml stuff was pulled in after uclibc.mk
causing problems.  Newer uml messes up sigcontext.h and is a pain
to build anyways.  So kill it for now.  It is trivial to build for
stock i386 and then boot the generated root_fs using uml.
---

diff --git a/Makefile b/Makefile
index 5a901365fb..04a2b7f6a5 100644
--- a/Makefile
+++ b/Makefile
@@ -134,15 +134,13 @@ else
 TARGETS+=uclibc-configured binutils gcc3_3 ccache
 endif
 
-# Do you want user mode Linux (x86 only), or are you building a
-# your own kernel that will run on its own?  Perhaps you have a
-# kernel you have already configured and you want to use that?
-# The default is to just use a set of known working kernel
-# headers.  Unless you want to build a kernel, I recommend just
-# using that...
+# Are you building your own kernel?  Perhaps you have a kernel
+# you have already configured and you want to use that?  The
+# default is to just use a set of known working kernel headers.
+# Unless you want to build a kernel, I recommend just using
+# that...
 TARGETS+=kernel-headers
 #TARGETS+=linux
-#TARGETS+=user-mode-linux
 #TARGETS+=system-linux
 
 # The default minimal set
diff --git a/make/user-mode-linux.mk b/make/user-mode-linux.mk
deleted file mode 100644
index e84541c03e..0000000000
--- a/make/user-mode-linux.mk
+++ /dev/null
@@ -1,66 +0,0 @@
-#############################################################
-#
-# Linux kernel targets
-#
-#############################################################
-ifneq ($(filter $(TARGETS),user-mode-linux),)
-
-LINUX_VERSION=2.4.20
-LINUX_DIR=$(BUILD_DIR)/linux-$(LINUX_VERSION)
-LINUX_SOURCE=linux-$(LINUX_VERSION).tar.bz2
-LINUX_SITE=http://ftp.us.kernel.org/pub/linux/kernel/v2.4
-LINUX_PATCH_1:=uml-patch-$(LINUX_VERSION)-6.bz2
-LINUX_PATCH_1_SITE:=http://aleron.dl.sourceforge.net/sourceforge/user-mode-linux
-LINUX_KCONFIG=$(SOURCE_DIR)/linux-uml.config
-LINUX_KERNEL=$(BASE_DIR)/UMlinux
-# Used by pcmcia-cs and others
-LINUX_SOURCE_DIR=$(LINUX_DIR)
-
-$(DL_DIR)/$(LINUX_SOURCE):
-	$(WGET) -P $(DL_DIR) $(LINUX_SITE)/$(LINUX_SOURCE)
-
-$(DL_DIR)/$(LINUX_PATCH_1):
-	$(WGET) -P $(DL_DIR) $(LINUX_PATCH_1_SITE)/$(LINUX_PATCH_1)
-
-user-mode-linux-source: $(DL_DIR)/$(LINUX_SOURCE) $(DL_DIR)/$(LINUX_PATCH_1)
-
-$(LINUX_DIR)/.unpacked: $(DL_DIR)/$(LINUX_SOURCE) $(DL_DIR)/$(LINUX_PATCH_1)
-	bzcat $(DL_DIR)/$(LINUX_SOURCE) | tar -C $(BUILD_DIR) -xvf -
-	rm -rf $(BUILD_DIR)/linux
-	-(cd $(BUILD_DIR); ln -sf $(LINUX_DIR) linux)
-	touch $(LINUX_DIR)/.unpacked
-
-$(LINUX_DIR)/.patched: $(LINUX_DIR)/.unpacked
-	bzcat $(DL_DIR)/$(LINUX_PATCH_1) | patch -d $(LINUX_DIR) -p1
-	touch $(LINUX_DIR)/.patched
-
-$(LINUX_DIR)/.set_arch: $(LINUX_DIR)/.patched
-	$(SED) "s/^ARCH :=.*/ARCH:=um/g;" $(LINUX_DIR)/Makefile
-	touch $(LINUX_DIR)/.set_arch
-
-$(LINUX_DIR)/.configured $(BUILD_DIR)/linux/.configured:  $(LINUX_DIR)/.set_arch  $(LINUX_KCONFIG)
-	cp $(LINUX_KCONFIG) $(LINUX_DIR)/.config
-	$(MAKE) -C $(LINUX_DIR) oldconfig include/linux/version.h
-	touch $(LINUX_DIR)/.configured
-
-$(LINUX_DIR)/.depend_done:  $(LINUX_DIR)/.configured
-	$(MAKE) -C $(LINUX_DIR) dep
-	touch $(LINUX_DIR)/.depend_done
-
-$(LINUX_DIR)/linux: $(LINUX_DIR)/.depend_done
-	$(MAKE) -C $(LINUX_DIR) linux
-
-$(LINUX_KERNEL): $(LINUX_DIR)/linux
-	cp -fa $(LINUX_DIR)/linux $(LINUX_KERNEL)
-
-user-mode-linux: $(LINUX_KERNEL)
-
-# Renamed so it is not cleaned by default on a make clean
-user-mode-linux_clean: clean
-	rm -f $(LINUX_KERNEL)
-	-$(MAKE) -C $(LINUX_DIR) clean
-
-user-mode-linux-dirclean:
-	rm -rf $(LINUX_DIR)
-
-endif