From: Sebastien Van Cauwenberghe Date: Sun, 24 Jul 2016 15:36:58 +0000 (+0200) Subject: configs: add defconfig for Digilent Zybo X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=0f8433ab04a13a052b4431f54cef98326d23bf71;p=buildroot.git configs: add defconfig for Digilent Zybo This configuration allows out-of-the box Digilent Zybo support. It uses mainline U-boot and Linux kernel. This configuration generates a SD card image named sdcard.img. [Peter: rename genimage.cfg, cleanup post-image script, enable VFP support, use 4.6 kernel headers and add tools needed by genimage] Signed-off-by: Sebastien Van Cauwenberghe Signed-off-by: Peter Korsgaard --- diff --git a/board/digilent/zybo/genimage.cfg b/board/digilent/zybo/genimage.cfg new file mode 100644 index 0000000000..f39186d07b --- /dev/null +++ b/board/digilent/zybo/genimage.cfg @@ -0,0 +1,29 @@ +image boot.vfat { + vfat { + files = { + "BOOT.BIN", + "uEnv.txt", + "system.bit", + "zynq-zybo.dtb", + "u-boot-dtb.img", + "uImage" + } + } + size = 32M +} + +image sdcard.img { + hdimage { + } + + partition boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + } +} diff --git a/board/digilent/zybo/post-image.sh b/board/digilent/zybo/post-image.sh new file mode 100755 index 0000000000..619cb9019e --- /dev/null +++ b/board/digilent/zybo/post-image.sh @@ -0,0 +1,18 @@ +#!/bin/sh + +BOARD_DIR="$(dirname $0)" +GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg" +GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp" +OUTPUT_DIR="${O}/images" + +rm -rf "${GENIMAGE_TMP}" + +cp board/digilent/zybo/uEnv.txt ${BINARIES_DIR} +cp board/digilent/zybo/system.bit ${BINARIES_DIR} + +genimage \ + --rootpath "${TARGET_DIR}" \ + --tmppath "${GENIMAGE_TMP}" \ + --inputpath "${BINARIES_DIR}" \ + --outputpath "${BINARIES_DIR}" \ + --config "${GENIMAGE_CFG}" diff --git a/board/digilent/zybo/readme.txt b/board/digilent/zybo/readme.txt new file mode 100644 index 0000000000..2a60a7cc17 --- /dev/null +++ b/board/digilent/zybo/readme.txt @@ -0,0 +1,76 @@ +Digilent Zybo +============= + +This is the Buildroot board support for the Digilent Zybo. The Zybo is +a development board based on the Xilinx Zynq-7000 based All-Programmable +System-On-Chip. + +Zybo information including schematics, reference designs, and manuals are +available from http://store.digilentinc.com/zybo-zynq-7000-arm-fpga-soc-trainer-board/ . + +If you want a custom FPGA bitstream to be loaded by U-Boot, copy it as +system.bit in board/digilent/zybo/. + +Steps to create a working system for Zybo: + +1) make zynq_zybo_defconfig +2) make +3) write your SD Card with the sdcard.img file using dd by doing + $ sudo dd if=output/images/sdcard.img of=/dev/sdX +4) insert the SD Card and power up your Zybo +5) Expect serial console on the second USB serial port exposed by the board + +The expected output: + + U-Boot SPL 2016.05 (May 20 2016 - 16:16:24) + mmc boot + Trying to boot from MMC1 + reading system.dtb + spl_load_image_fat_os: error reading image system.dtb, err - -1 + reading u-boot-dtb.img + reading u-boot-dtb.img + + + U-Boot 2016.05 (May 20 2016 - 16:16:24 +0200) + + Model: Zynq ZYBO Development Board + Board: Xilinx Zynq + I2C: ready + DRAM: ECC disabled 512 MiB + MMC: sdhci@e0100000: 0 + SF: Detected S25FL128S_64K with page size 256 Bytes, erase size 64 KiB, total 16 MiB + In: serial@e0001000 + Out: serial@e0001000 + Err: serial@e0001000 + Model: Zynq ZYBO Development Board + Board: Xilinx Zynq + Net: ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id + I2C EEPROM MAC address read failed + + Warning: ethernet@e000b000 (eth0) using random MAC address - 56:64:dd:a7:6d:94 + eth0: ethernet@e000b000 + ... + +Resulting system +---------------- +Once the build process is finished you will have an image called "sdcard.img" +in the output/images/ directory. + +The first partition is a FAT32 partition created at the beginning of the SD Card +that contains the following files : + /BOOT.BIN + /zynq-zybo.dtb + /uEnv.txt + /system.bit + /uImage + /u-boot-dtb.img + +The second partition is an ext4 partition that contains the root filesystem. + +You can alter the booting procedure by modifying the uEnv.txt file +in first partition of the SD card. It is a plain text file in format += one per line: + +kernel_image=myimage +modeboot=myboot +myboot=... diff --git a/board/digilent/zybo/system.bit b/board/digilent/zybo/system.bit new file mode 100644 index 0000000000..e69de29bb2 diff --git a/board/digilent/zybo/uEnv.txt b/board/digilent/zybo/uEnv.txt new file mode 100644 index 0000000000..1042538a5d --- /dev/null +++ b/board/digilent/zybo/uEnv.txt @@ -0,0 +1,5 @@ +bootargs=root=/dev/mmcblk0p2 rootwait rw rootfstype=ext4 +fpga_image=system.bit +fpgaboot=if fatload mmc 0 0x1000000 ${fpga_image}; then echo Booting FPGA from ${fpga_image}; fpga info 0 && fpga loadb 0 0x1000000 $filesize; else echo FPGA image ${fpga_image} was not found, skipping...; fi; +kernel_image=uImage +sdboot=echo Booting from SD...; run fpgaboot; fatload mmc 0 0x1000000 ${kernel_image} && fatload mmc 0 0x2000000 zynq-zybo.dtb && bootm 0x1000000 - 0x2000000 diff --git a/configs/zynq_zybo_defconfig b/configs/zynq_zybo_defconfig new file mode 100644 index 0000000000..aef1ac208c --- /dev/null +++ b/configs/zynq_zybo_defconfig @@ -0,0 +1,29 @@ +BR2_arm=y +BR2_cortex_a9=y +BR2_ARM_ENABLE_NEON=y +BR2_ARM_ENABLE_VFP=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y +BR2_TARGET_GENERIC_GETTY_PORT="ttyPS0" +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/digilent/zybo/post-image.sh" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.4" +BR2_LINUX_KERNEL_DEFCONFIG="multi_v7" +BR2_LINUX_KERNEL_UIMAGE=y +BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x8000" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="zynq-zybo" +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_VERSION=y +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2016.05" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="zynq_zybo" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_FORMAT_DTB_IMG=y +BR2_TARGET_UBOOT_SPL=y +BR2_TARGET_UBOOT_ZYNQ_IMAGE=y +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y