From: Stu Grossman Date: Fri, 5 Jan 1996 00:42:36 +0000 (+0000) Subject: * breakpoint.c (remove_breakpoint): Change error to warning so X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=0fe1522ad05f27e4ef3528f5cf0b63c75b755fe4;p=binutils-gdb.git * breakpoint.c (remove_breakpoint): Change error to warning so that hardware watchpoint removal problems won't leave breakpoint traps in the target. * configure configure.in: Make --enable-gdbtk be the default. * remote-e7000.c (e7000_insert_breakpoint, e7000_remove_breakpoint): Use e7000 based breakpoints, not memory breakpoints. * (e7000_wait): Adjust PC back by two when we see a breakpoint to compensate for e7000 maladjustment. * sparcl-tdep.c (sparclite_check_watch_resources): Fix logic bug which prevented hardware watchpoints from working. --- diff --git a/gdb/ChangeLog b/gdb/ChangeLog index dc2ab8f1be4..d9a494d441b 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,3 +1,17 @@ +Thu Jan 4 16:04:54 1996 Stu Grossman (grossman@cygnus.com) + + * breakpoint.c (remove_breakpoint): Change error to warning so + that hardware watchpoint removal problems won't leave breakpoint + traps in the target. + * configure configure.in: Make --enable-gdbtk be the default. + * remote-e7000.c (e7000_insert_breakpoint, + e7000_remove_breakpoint): Use e7000 based breakpoints, not memory + breakpoints. + * (e7000_wait): Adjust PC back by two when we see a breakpoint to + compensate for e7000 maladjustment. + * sparcl-tdep.c (sparclite_check_watch_resources): Fix logic bug + which prevented hardware watchpoints from working. + Thu Jan 4 10:44:17 1996 Fred Fish * infptrace.c (udot_info): New function. diff --git a/gdb/breakpoint.c b/gdb/breakpoint.c index aebc62ae04d..f2babaaf5e0 100644 --- a/gdb/breakpoint.c +++ b/gdb/breakpoint.c @@ -652,8 +652,8 @@ remove_breakpoint (b) } /* Failure to remove any of the hardware watchpoints comes here. */ if (b->inserted) - error ("Hardware watchpoint %d: Could not remove watchpoint\n", - b->number); + warning ("Hardware watchpoint %d: Could not remove watchpoint\n", + b->number); /* Free the saved value chain. We will construct a new one the next time the watchpoint is inserted. */ @@ -3427,7 +3427,7 @@ breakpoint_re_set () #endif #if 0 - /* Took this out (temporaliy at least), since it produces an extra + /* Took this out (temporarily at least), since it produces an extra blank line at startup. This messes up the gdbtests. -PB */ /* Blank line to finish off all those mention() messages we just printed. */ printf_filtered ("\n"); diff --git a/gdb/configure b/gdb/configure index 7e86a4d590e..3e72ddb5e77 100755 --- a/gdb/configure +++ b/gdb/configure @@ -1427,14 +1427,34 @@ ENABLE_GDBTK= if test "${enable_gdbtk+set}" = set; then enableval="$enable_gdbtk" case "${enableval}" in -yes) enable_gdbtk=yes ;; -no) enable_gdbtk=no ;; -*) { echo "configure: error: bad value ${enableval} given for gdbtk option" 1>&2; exit 1; } ;; + yes) + case "$host" in + *go32*) + echo "configure: warning: GDB does not support GDBtk on host ${host}. GDBtk will be disabled." 1>&2 + enable_gdbtk=no ;; + *) + enable_gdbtk=yes ;; + esac ;; + no) + enable_gdbtk=no ;; + *) + { echo "configure: error: bad value ${enableval} given for gdbtk option" 1>&2; exit 1; } ;; esac +else + +# Default is on for everything but go32 +case "$host" in + *go32*) + ;; + *) + enable_gdbtk=yes ;; + esac + fi if test "${enable_gdbtk}" = "yes"; then + # If we find X, set shell vars x_includes and x_libraries to the # paths, otherwise set no_x=yes. # Uses ac_ vars as temps to allow command line to override cache and checks. @@ -1496,7 +1516,7 @@ test -z "$x_direct_test_library" && x_direct_test_library=Xt test -z "$x_direct_test_function" && x_direct_test_function=XtMalloc test -z "$x_direct_test_include" && x_direct_test_include=X11/Intrinsic.h cat > conftest.$ac_ext < EOF @@ -1559,7 +1579,7 @@ rm -f conftest* ac_save_LIBS="$LIBS" LIBS="-l$x_direct_test_library $LIBS" cat > conftest.$ac_ext < conftest.$ac_ext < conftest.$ac_ext < conftest.$ac_ext < conftest.$ac_ext < conftest.$ac_ext <&6 else cat > conftest.$ac_ext < EOF @@ -1995,7 +2015,7 @@ if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF diff --git a/gdb/configure.in b/gdb/configure.in index bcc88f5184c..4e4e969db81 100644 --- a/gdb/configure.in +++ b/gdb/configure.in @@ -67,12 +67,31 @@ ENABLE_GDBTK= AC_ARG_ENABLE(gdbtk, [ --enable-gdbtk ], [case "${enableval}" in -yes) enable_gdbtk=yes ;; -no) enable_gdbtk=no ;; -*) AC_MSG_ERROR(bad value ${enableval} given for gdbtk option) ;; -esac]) + yes) + case "$host" in + *go32*) + AC_MSG_WARN([GDB does not support GDBtk on host ${host}. GDBtk will be disabled.]) + enable_gdbtk=no ;; + *) + enable_gdbtk=yes ;; + esac ;; + no) + enable_gdbtk=no ;; + *) + AC_MSG_ERROR(bad value ${enableval} given for gdbtk option) ;; +esac], +[ +# Default is on for everything but go32 +case "$host" in + *go32*) + ;; + *) + enable_gdbtk=yes ;; + esac +]) if test "${enable_gdbtk}" = "yes"; then + AC_PATH_X AC_PATH_XTRA diff --git a/gdb/remote-e7000.c b/gdb/remote-e7000.c index b4aaaed310e..105ae830a33 100644 --- a/gdb/remote-e7000.c +++ b/gdb/remote-e7000.c @@ -18,7 +18,7 @@ You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ + Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ /* The E7000 is an in-circuit emulator for the Hitachi H8/300-H and Hitachi-SH processor. It has serial port and a lan port. @@ -43,7 +43,7 @@ #include #include "serial.h" #include "remote-utils.h" - +#include "symfile.h" #if 0 #define HARD_BREAKPOINTS #define BC_BREAKPOINTS 0 @@ -1426,8 +1426,10 @@ e7000_insert_breakpoint (addr, shadow) puts_e7000debug (buf); } #else +#if 0 e7000_read_inferior_memory (addr, shadow, 2); e7000_write_inferior_memory (addr, nop, 2); +#endif sprintf (buf, "B %x\r", addr); puts_e7000debug (buf); @@ -1470,8 +1472,10 @@ e7000_remove_breakpoint (addr, shadow) puts_e7000debug (buf); expect_prompt (); +#if 0 /* Replace the insn under the break */ e7000_write_inferior_memory (addr, shadow, 2); +#endif #endif return 0; @@ -1517,13 +1521,6 @@ e7000_command (args, fromtty) registers_changed (); } -static void -e7000_load (args, fromtty) - char *args; - int fromtty; -{ - gr_load_image (args, fromtty); -} static void e7000_drain_command (args, fromtty) @@ -1776,6 +1773,7 @@ e7000_wait (pid, status) switch (stop_reason) { case 1: /* Breakpoint */ + write_pc (read_pc () - 2); /* PC is always off by 2 for breakpoints */ status->value.sig = TARGET_SIGNAL_TRAP; break; case 0: /* Single step */ @@ -1840,20 +1838,15 @@ target e7000 foobar", e7000_prepare_to_store, /* to_prepare_to_store */ e7000_xfer_inferior_memory, /* to_xfer_memory */ e7000_files_info, /* to_files_info */ -#ifdef HARD_BREAKPOINTS e7000_insert_breakpoint, /* to_insert_breakpoint */ e7000_remove_breakpoint, /* to_remove_breakpoint */ -#else - memory_insert_breakpoint, /* to_insert_breakpoint */ - memory_remove_breakpoint, /* to_remove_breakpoint */ -#endif 0, /* to_terminal_init */ 0, /* to_terminal_inferior */ 0, /* to_terminal_ours_for_output */ 0, /* to_terminal_ours */ 0, /* to_terminal_info */ e7000_kill, /* to_kill */ - e7000_load, /* to_load */ + generic_load, /* to_load */ 0, /* to_lookup_symbol */ e7000_create_inferior, /* to_create_inferior */ e7000_mourn_inferior, /* to_mourn_inferior */ diff --git a/gdb/sparcl-tdep.c b/gdb/sparcl-tdep.c index b97496d31f0..37465ce192d 100644 --- a/gdb/sparcl-tdep.c +++ b/gdb/sparcl-tdep.c @@ -239,17 +239,21 @@ sparclite_check_watch_resources (type, cnt, ot) int ot; { if (type == bp_hardware_breakpoint) - if (TARGET_HW_BREAK_LIMIT == 0) - return 0; - else if (cnt <= TARGET_HW_BREAK_LIMIT) - return 1; + { + if (TARGET_HW_BREAK_LIMIT == 0) + return 0; + else if (cnt <= TARGET_HW_BREAK_LIMIT) + return 1; + } else - if (TARGET_HW_WATCH_LIMIT == 0) - return 0; - else if (ot) - return -1; - else if (cnt <= TARGET_HW_WATCH_LIMIT) - return 1; + { + if (TARGET_HW_WATCH_LIMIT == 0) + return 0; + else if (ot) + return -1; + else if (cnt <= TARGET_HW_WATCH_LIMIT) + return 1; + } return -1; }