From: Jim Kingdon Date: Fri, 11 Jun 1993 19:00:25 +0000 (+0000) Subject: rename for 14-char filenames X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=10d7cfa7cf55b47a367e04043a4362ea6f1c49b0;p=binutils-gdb.git rename for 14-char filenames --- diff --git a/gdb/remote-es1800.c b/gdb/remote-es1800.c index 1c442d5831c..e69de29bb2d 100644 --- a/gdb/remote-es1800.c +++ b/gdb/remote-es1800.c @@ -1,2262 +0,0 @@ -/* Memory-access and commands for remote es1800 processes, for GDB. - Copyright (C) 1988, 1992 Free Software Foundation, Inc. - - This file is added to GDB to make it possible to do debugging via an - ES-1800 emulator. The code was originally written by Johan Holmberg - TT/SJ Ericsson Telecom AB and later modified by Johan Henriksson - TT/SJ. It was modified for gdb 4.0 by TX/DK Jan Nordenand by TX/DKG - Harald Johansen. - -This file is part of GDB. - -GDB is free software; you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation; either version 1, or (at your option) -any later version. - -GDB is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with GDB; see the file COPYING. If not, write to -the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */ - - -/* Emulator communication protocol. - All values are encoded in ascii hex digits. - - Request -Command -Reply - read registers: -DR - - 0 - - 1 - - 2 - - 3 - - 4 - - 5 - -- 6 - - 7 - -D = XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX -A = XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX - PC = XXXXXX SSP = XXXXXX USP = XXXXXX SR = XXXXXXXX - > -Each byte of register data is described by two hex digits. - - write regs -D0=XXXXXXXX - >D1=XXXXXXXX - >D2=XXXXXXXX - >D3=XXXXXXXX - >D4=XXXXXXXX - >D5=XXXXXXXX - >D6=XXXXXXXX - >D7=XXXXXXXX - >A0=XXXXXXXX - >A1=XXXXXXXX - >A2=XXXXXXXX - >A3=XXXXXXXX - >A4=XXXXXXXX - >A5=XXXXXXXX - >A6=XXXXXXXX - >A7=XXXXXXXX - >SR=XXXXXXXX - >PC=XXXXXX - > -Each byte of register data is described by two hex digits. - - read mem -@.BAA..AA -$FFFFFFXX - > -AA..AA is address, XXXXXXX is the contents - - write mem - @.BAA..AA=$XXXXXXXX - > -AA..AA is address, XXXXXXXX is data - - cont -PC=$AA..AA - >RBK -R> -AA..AA is address to resume. If AA..AA is omitted, resume at same address. - - step -PC=$AA..AA - >STP -R> -AA..AA is address to resume. If AA..AA is omitted, resume at same address. - - kill req -STP - > -*/ - - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "defs.h" -#include "frame.h" -#include "inferior.h" -#include "target.h" -#include "wait.h" -#include "terminal.h" -#include "command.h" - -#ifdef USG -#include -#include -#endif - -#include - -/* External variables referenced. */ - -extern bfd *exec_bfd; - -/* Prototypes for local functions */ - -static void -es1800_child_detach PARAMS ((char *, int)); - -static void -es1800_child_open PARAMS ((char *, int)); - -static void -es1800_transparent PARAMS ((char *, int)); - -static void -es1800_create_inferior PARAMS ((char *, char *, char **)); - -static void -es1800_load PARAMS ((char *, int)); - -static void -es1800_kill PARAMS ((void)); - -static int -verify_break PARAMS ((int)); - -static int -es1800_remove_breakpoint PARAMS ((CORE_ADDR, char *)); - -static int -es1800_insert_breakpoint PARAMS ((CORE_ADDR, char *)); - -static void -es1800_files_info PARAMS ((struct target_ops *)); - -static int -es1800_xfer_inferior_memory PARAMS ((CORE_ADDR, char *, int, int, - struct target_ops *)); - -static void -es1800_prepare_to_store PARAMS ((void)); - -static int -es1800_wait PARAMS ((WAITTYPE *)); - -static void -es1800_resume PARAMS ((int, int)); - -static void -es1800_detach PARAMS ((char *, int)); - -static void -es1800_attach PARAMS ((char *, int)); - -static int -damn_b PARAMS ((char *)); - -static void -es1800_open PARAMS ((char *, int)); - -static void -es1800_timer PARAMS ((void)); - -static void -es1800_reset PARAMS ((char *)); - -static void -es1800_request_quit PARAMS ((void)); - -static int -readchar PARAMS ((void)); - -static void -expect PARAMS ((char *, int)); - -static void -expect_prompt PARAMS ((void)); - -static void -download PARAMS ((FILE *, int, int)); - -#if 0 -static void -bfd_copy PARAMS ((bfd *, bfd *)); -#endif - -static void -get_break_addr PARAMS ((int, CORE_ADDR *)); - -static int -fromhex PARAMS ((int)); - -static int -tohex PARAMS ((int)); - -static void -es1800_close PARAMS ((int)); - -static void -es1800_fetch_registers PARAMS ((void)); - -static void -es1800_fetch_register PARAMS ((int)); - -static void -es1800_store_register PARAMS ((int)); - -static void -es1800_read_bytes PARAMS ((CORE_ADDR, char *, int)); - -static void -es1800_write_bytes PARAMS ((CORE_ADDR, char *, int)); - -static void -send_with_reply PARAMS ((char *, char *, int)); - -static void -send_command PARAMS ((char *)); - -static void -send PARAMS ((char *)); - -static void -getmessage PARAMS ((char *, int)); - -static void -es1800_mourn_inferior PARAMS ((void)); - -static void -es1800_create_break_insn PARAMS ((char *, int)); - -static void -es1800_init_break PARAMS ((char *, int)); - -/* Local variables */ - -#define LOG_FILE "es1800.log" -#if defined (LOG_FILE) -static FILE *log_file; -#endif - -extern struct target_ops es1800_ops; /* Forward decl */ -extern struct target_ops es1800_child_ops; /* Forward decl */ - -static int kiodebug; -static int timeout = 100; -static char *savename; /* Name of i/o device used */ -static TERMINAL es1800_sg_save; /* Save stty state */ -static int es1800_fc_save; /* Save fcntl state */ - -/* indicates that the emulator uses 32-bit data-adress (68020-mode) - instead of 24-bit (68000 -mode) */ - -static int m68020; - -#define MODE (m68020 ? "M68020" : "M68000" ) -#define ES1800_BREAK_VEC (0xf) - -/* Descriptor for I/O to remote machine. Initialize it to -1 so that - es1800_open knows that we don't have a file open when the program - starts. */ - -static int es1800_desc = -1; - -#define PBUFSIZ 1000 -#define HDRLEN sizeof("@.BAAAAAAAA=$VV\r") - -/* Maximum number of bytes to read/write at once. The value here - is chosen to fill up a packet. */ - -#define MAXBUFBYTES ((PBUFSIZ-150)*16/75 ) - -static int es1800_break_vec = 0; -static char es1800_break_insn[2]; -static long es1800_break_address; -static void (*old_sigint)(); /* Old signal-handler for sigint */ -static jmp_buf interrupt; - -/* Local signalhandler to allow breaking tranfers or program run. - Rely on global variables: old_sigint(), interrupt */ - -static void -es1800_request_quit () -{ - /* restore original signalhandler */ - signal (SIGINT, old_sigint); - longjmp (interrupt, 1); -} - - -/* Reset emulator. - Sending reset character(octal 32) to emulator. - quit - return to '(esgdb)' prompt or continue */ - -static void -es1800_reset (quit) - char *quit; -{ - char buf[80]; - - if (quit) - { - printf ("\nResetting emulator... "); - } - strcpy (buf, "\032"); - send (buf); - expect_prompt (); - if (quit) - { - error ("done\n"); - } -} - - -/* Called when SIGALRM signal sent due to alarm() timeout. - Rely on global variables: timeout */ - -#ifndef HAVE_TERMIO - -static void -es1800_timer () -{ - if (kiodebug) - { - printf ("es1800_timer called\n"); - } - alarm (timeout); -} - -#endif /* HAVE_TERMIO */ - - -/* Open a connection to a remote debugger and push the new target - onto the stack. Check if the emulator is responding and find out - what kind of processor the emulator is connected to. - Initiate the breakpoint handling in the emulator. - - name - the filename used for communication (ex. '/dev/tta') - from_tty - says whether to be verbose or not */ - -static void -es1800_open (name, from_tty) - char *name; - int from_tty; -{ - TERMINAL sg; - char buf[PBUFSIZ]; - char *p; - int i, fcflag; - char *baudrate; - - m68020 = 0; - - if (!name) /* no device name given in target command */ - { - error_no_arg ("serial port device name"); - } - baudrate = baud_rate ? baud_rate : "19200"; /* default baudrate = 19200 */ - - target_preopen (from_tty); - es1800_close (0); - - /* open the device and configure it for communication */ - -#ifndef DEBUG_STDIN - - es1800_desc = open (name, O_RDWR); - if (es1800_desc < 0) - { - perror_with_name (name); - } - savename = savestring (name, strlen (name)); - - if (ioctl (es1800_desc, TIOCGETP, &sg) == -1) - { - perror_with_name (name); - } - es1800_sg_save = sg; - - if ((fcflag = fcntl (es1800_desc, F_GETFL, 0)) == -1) - { - perror_with_name ("fcntl serial"); - } - es1800_fc_save = fcflag; - - fcflag = (fcflag & (FREAD | FWRITE)); /* mask out any funny stuff */ - if (fcntl (es1800_desc, F_SETFL, fcflag) == -1) - { - perror_with_name ("fcntl serial"); - } - -#ifdef HAVE_TERMIO - sg.c_cc[VMIN] = 0; /* read with timeout. */ - sg.c_cc[VTIME] = timeout * 10; - sg.c_lflag &= ~(ICANON | ECHO); - sg.c_cflag = (sg.c_cflag & ~CBAUD) | damn_b (baudrate); -#else - sg.sg_ispeed = damn_b (baudrate); - sg.sg_ospeed = damn_b (baudrate); - sg.sg_flags = CBREAK+TANDEM; -#endif - - if ((ioctl (es1800_desc, TIOCSETP, &sg)) == -1) - { - perror ("es1800_open: error in ioctl"); - } - -#endif /* DEBUG_STDIN */ - - push_target (&es1800_ops); /* Switch to using remote target now */ - if (from_tty) - { - printf ("Remote ES1800 debugging using %s\n", name); - } - -#ifndef HAVE_TERMIO - -#ifndef NO_SIGINTERRUPT - - /* Cause SIGALRM's to make reads fail with EINTR instead of resuming - the read. */ - - if (siginterrupt (SIGALRM, 1) != 0) - { - perror ("es1800_open: error in siginterrupt"); - } - -#endif /* NO_SIGINTERRUPT */ - - /* Set up read timeout timer. */ - - if ((void(*)()) signal (SIGALRM, es1800_timer) == (void(*)()) -1) - { - perror ("es1800_open: error in signal"); - } - -#endif /* HAVE_TERMIO */ - - -#if defined (LOG_FILE) - - log_file = fopen (LOG_FILE, "w"); - if (log_file == NULL) - { - perror_with_name (LOG_FILE); - } - -#endif /* LOG_FILE */ - - /* Hello? Are you there?, also check mode */ - - /* send_with_reply( "DB 0 TO 1", buf, sizeof(buf)); */ - /* for (p = buf, i = 0; *p++ =='0';) */ /* count the number of zeros */ - /* i++; */ - - send ("\032"); - getmessage (buf, sizeof (buf)); /* send reset character */ - - if (from_tty) - { - printf ("Checking mode.... "); - } - /* m68020 = (i==8); */ /* if eight zeros then we are in m68020 mode */ - - /* What kind of processor am i talking to ?*/ - p = buf; - while (*p++ != '\n') {;} - while (*p++ != '\n') {;} - while (*p++ != '\n') {;} - for (i = 0; i < 20; i++, p++) {;} - m68020 = !strncmp (p, "68020", 5); - if (from_tty) - { - printf ("You are in %s(%c%c%c%c%c)-mode\n", MODE, p[0], p[1], p[2], - p[3], p[4]); - } - - /* if no init_break statement is present in .gdb file we have to check - whether to download a breakpoint routine or not */ - -#if 0 - if ((es1800_break_vec == 0) || (verify_break (es1800_break_vec) != 0) - && query ("No breakpoint routine in ES 1800 emulator!\nDownload a breakpoint routine to the emulator? ")) - { - CORE_ADDR memaddress; - printf ("Give the start address of the breakpoint routine: "); - scanf ("%li", &memaddress); - es1800_init_break ((es1800_break_vec ? es1800_break_vec : - ES1800_BREAK_VEC), memaddress); - } -#endif - -} - -/* Close out all files and local state before this target loses control. - quitting - are we quitting gdb now? */ - -static void -es1800_close (quitting) - int quitting; -{ - if (es1800_desc >= 0) - { - printf ("\nClosing connection to emulator...\n"); - ioctl (es1800_desc, TIOCSETP, &es1800_sg_save); - fcntl (es1800_desc,F_SETFL, es1800_fc_save); - close (es1800_desc); - es1800_desc = -1; - } - if (savename != NULL) - { - free (savename); - } - savename = NULL; - -#if defined (LOG_FILE) - - if (log_file != NULL) - { - if (ferror (log_file)) - { - printf ("Error writing log file.\n"); - } - if (fclose (log_file) != 0) - { - printf ("Error closing log file.\n"); - } - log_file = NULL; - } - -#endif /* LOG_FILE */ - -} - -/* damn_b() - - Translate baud rates from integers to damn B_codes. Unix should - have outgrown this crap years ago, but even POSIX wouldn't buck it. - rate - the baudrate given as a string - return value: the baudrate as a B_code */ - -#ifndef B19200 -# define B19200 EXTA -#endif -#ifndef B38400 -# define B38400 EXTB -#endif - -struct -{ - char *rate, - damn_b; -} baudtab[] = { - {"0", B0}, - {"50", B50}, - {"75", B75}, - {"110", B110}, - {"134", B134}, - {"150", B150}, - {"200", B200}, - {"300", B300}, - {"600", B600}, - {"1200", B1200}, - {"1800", B1800}, - {"2400", B2400}, - {"4800", B4800}, - {"9600", B9600}, - {"19200", B19200}, - {"38400", B38400}, - {0, -1}, -}; - -static int -damn_b (rate) - char *rate; -{ - int i; - - for (i = 0; baudtab[i].rate != 0; i++) - { - if (STREQ (rate, baudtab[i].rate)) - { - return (baudtab[i].damn_b); - } - } - error ("Illegal baudrate"); -} - - -/* Attaches to a process on the target side - proc_id - the id of the process to be attached. - from_tty - says whether to be verbose or not */ - -static void -es1800_attach (args, from_tty) - char *args; - int from_tty; -{ - error ("Cannot attach to pid %s, this feature is not implemented yet.", - args); -} - - -/* Takes a program previously attached to and detaches it. - We better not have left any breakpoints - in the program or it'll die when it hits one. - Close the open connection to the remote debugger. - Use this when you want to detach and do something else - with your gdb. - - args - arguments given to the 'detach' command - from_tty - says whether to be verbose or not */ - -static void -es1800_detach (args, from_tty) - char *args; - int from_tty; -{ - if (args) - { - error ("Argument given to \"detach\" when remotely debugging."); - } - pop_target (); - if (from_tty) - { - printf ("Ending es1800 remote debugging.\n"); - } -} - - -/* Tell the remote machine to resume. - step - single-step or run free - siggnal - the signal value to be given to the target (0 = no signal) */ - -static void -es1800_resume (step, siggnal) - int step; - int siggnal; -{ - char buf[PBUFSIZ]; - - if (siggnal) - { - error ("Can't send signals to a remote system."); - } - if (step) - { - strcpy (buf,"STP\r"); - send (buf); - } - else - { - send_command ("RBK"); - } -} - -/* Wait until the remote machine stops, then return, - storing status in STATUS just as `wait' would. - status - */ - -static int -es1800_wait (status) - WAITTYPE *status; -{ - unsigned char buf[PBUFSIZ]; - int old_timeout = timeout; - - WSETEXIT ((*status), 0); - timeout = 0; /* Don't time out -- user program is running. */ - if (!setjmp (interrupt)) - { - old_sigint = signal (SIGINT, es1800_request_quit); - while (1) - { - getmessage (buf, sizeof(buf)); - if (strncmp ( buf, "\r\n* BREAK *", 11) == 0) - { - WSETSTOP ((*status), SIGTRAP); - send_command ("STP"); /* Restore stack and PC and such */ - if (m68020) - { - send_command ("STP"); - } - break; - } - if (strncmp (buf, "STP\r\n ", 6) == 0) - { - WSETSTOP ((*status), SIGTRAP); - break; - } - if (buf[strlen (buf) - 2] == 'R') - { - printf ("Unexpected emulator reply: \n%s\n", buf); - } - else - { - printf ("Unexpected stop: \n%s\n", buf); - WSETSTOP ((*status), SIGQUIT); - break; - } - } - } - else - { - fflush (stdin); - printf ("\nStopping emulator..."); - if (!setjmp (interrupt)) - { - old_sigint = signal (SIGINT, es1800_request_quit); - send_command ("STP"); - printf (" emulator stopped\n"); - WSETSTOP ((*status), SIGINT); - } - else - { - fflush (stdin); - es1800_reset ((char*) 1); - } - } - signal (SIGINT, old_sigint); - timeout = old_timeout; - return (0); -} - - -/* Fetch register values from remote machine. - regno - the register to be fetched (fetch all registers if -1) */ - -static void -es1800_fetch_register (regno) - int regno; -{ - char buf[PBUFSIZ]; - int k; - int r; - char *p; - static char regtab[18][4] = - { - "D0 ", "D1 ", "D2 ", "D3 ", "D4 ", "D5 ", "D6 ", "D7 ", - "A0 ", "A1 ", "A2 ", "A3 ", "A4 ", "A5 ", "A6 ", "SSP", - "SR ", "PC " - }; - - if ((regno < 15) || (regno == 16) || (regno == 17)) - { - r = regno * 4; - send_with_reply (regtab[regno], buf, sizeof (buf)); - p = buf; - for (k = 0; k < 4; k++) - { - if ((p[k*2 + 1] == 0) || (p[k*2 + 2] == 0)) - { - error ("Emulator reply is too short: %s", buf); - } - registers[r++] = (fromhex (p[k*2 + 1]) * 16) + fromhex (p[k*2 + 2]); - } - } - else - { - es1800_fetch_registers (); - } -} - -/* Read the remote registers into REGISTERS. - Always fetches all registers. */ - -static void -es1800_fetch_registers () -{ - char buf[PBUFSIZ]; - char SR_buf[PBUFSIZ]; - int i; - int k; - int r; - char *p; - - send_with_reply ("DR", buf, sizeof (buf)); - - /* Reply is edited to a string that describes registers byte by byte, - each byte encoded as two hex characters. */ - - p = buf; - r = 0; - - /* parsing row one - D0-D7-registers */ - - while (*p++ != '\n') {;} - for (i = 4; i < 70; i += (i == 39 ? 3 : 1)) - { - for (k = 0; k < 4; k++) - { - if (p[i+0] == 0 || p[i+1] == 0) - { - error ("Emulator reply is too short: %s", buf); - } - registers[r++] = (fromhex (p[i+0]) * 16) + fromhex (p[i+1]); - i += 2; - } - } - p += i; - - /* parsing row two - A0-A6-registers */ - - while (*p++ != '\n') {;} - for (i = 4; i < 61; i += (i == 39 ? 3 : 1)) - { - for (k = 0; k < 4; k++) - { - if (p[i+0] == 0 || p[i+1] == 0) - { - error ("Emulator reply is too short: %s", buf); - } - registers[r++] = (fromhex (p[i+0])) * 16 + fromhex (p[i+1]); - i += 2; - } - } - p += i; - - while (*p++ != '\n') {;} - - /* fetch SSP-, SR- and PC-registers */ - - /* first - check STATUS-word and decide which stackpointer to use */ - - send_with_reply ("SR", SR_buf, sizeof (SR_buf)); - p = SR_buf; - p += 5; - - if (m68020) - { - if (*p == '3') /* use masterstackpointer MSP */ - { - send_with_reply ("MSP", buf, sizeof (buf)); - } - else if (*p == '2') /* use interruptstackpointer ISP */ - { - send_with_reply ("ISP", buf, sizeof (buf)); - } - else /* use userstackpointer USP */ - { - send_with_reply ("USP", buf, sizeof (buf)); - } - p = buf; - for (k = 0; k<4; k++) - { - if (p[k*2+1] == 0 || p[k*2+2] == 0) - { - error ("Emulator reply is too short: %s", buf); - } - registers[r++] = fromhex (buf[k*2+1]) * 16 + fromhex (buf[k*2+2]); - } - - p = SR_buf; - for (k = 0; k < 4; k++) - { - if (p[k*2+1] == 0 || p[k*2+2] == 0) - { - error ("Emulator reply is too short: %s", buf); - } - registers[r++] = - fromhex (SR_buf[k*2+1]) * 16 + fromhex (SR_buf[k*2+2]); - } - send_with_reply ("PC", buf, sizeof (buf)); - p = buf; - for (k = 0; k<4; k++) - { - if (p[k*2+1] == 0 || p[k*2+2] == 0) - { - error ("Emulator reply is too short: %s", buf); - } - registers[r++] = fromhex (buf[k*2+1]) * 16 + fromhex (buf[k*2+2]); - } - } - else /* 68000-mode */ - { - if (*p == '2') /* use supervisorstackpointer SSP */ - { - send_with_reply ("SSP", buf, sizeof (buf)); - } - else /* use userstackpointer USP */ - { - send_with_reply ("USP", buf, sizeof (buf)); - } - - /* fetch STACKPOINTER */ - - p = buf; - for (k = 0; k < 4; k++) - { - if (p[k*2 + 1] == 0 || p[k*2 + 2] == 0) - { - error ("Emulator reply is too short: %s", buf); - } - registers[r++] = fromhex (buf[k*2+1]) * 16 + fromhex (buf[k*2+2]); - } - - /* fetch STATUS */ - - p = SR_buf; - for (k = 0; k < 4; k++) - { - if (p[k*2+1] == 0 || p[k*2+2] == 0) - { - error ("Emulator reply is too short: %s", buf); - } - registers[r++] = - fromhex (SR_buf[k*2+1]) * 16 + fromhex (SR_buf[k*2+2]); - } - - /* fetch PC */ - - send_with_reply ("PC", buf, sizeof (buf)); - p = buf; - for (k = 0; k < 4; k++) - { - if (p[k*2+1] == 0 || p[k*2+2] == 0) - { - error ("Emulator reply is too short: %s", buf); - } - registers[r++] = fromhex (buf[k*2+1]) * 16 + fromhex (buf[k*2+2]); - } - } -} - -/* Store register value, located in REGISTER, on the target processor. - regno - the register-number of the register to store - (-1 means store them all) - FIXME: Return errno value. */ - -static void -es1800_store_register(regno) - int regno; -{ - - static char regtab[18][4] = - { - "D0 ", "D1 ", "D2 ", "D3 ", "D4 ", "D5 ", "D6 ", "D7 ", - "A0 ", "A1 ", "A2 ", "A3 ", "A4 ", "A5 ", "A6 ", "SSP", - "SR ", "PC " - }; - - char buf[PBUFSIZ]; - char SR_buf[PBUFSIZ]; - char stack_pointer[4]; - char *p; - int i; - int j; - int k; - unsigned char *r; - - r = (unsigned char *) registers; - - if (regno == -1) /* write all registers */ - { - j = 0; - k = 18; - } - else /* write one register */ - { - j = regno; - k = regno+1; - r += regno * 4; - } - - if ((regno == -1) || (regno == 15)) - { - /* fetch current status */ - send_with_reply ("SR", SR_buf, sizeof (SR_buf)); - p = SR_buf; - p += 5; - if (m68020) - { - if (*p == '3') /* use masterstackpointer MSP */ - { - strcpy (stack_pointer,"MSP"); - } - else - { - if (*p == '2') /* use interruptstackpointer ISP */ - { - strcpy (stack_pointer,"ISP"); - } - else - { - strcpy (stack_pointer,"USP"); /* use userstackpointer USP */ - } - } - } - else /* 68000-mode */ - { - if (*p == '2') /* use supervisorstackpointer SSP */ - { - strcpy (stack_pointer,"SSP"); - } - else - { - strcpy (stack_pointer,"USP");/* use userstackpointer USP */ - } - } - strcpy (regtab[15],stack_pointer); - } - - for (i = j; i> 4) & 0x0f); - buf[6] = tohex (*r++ & 0x0f); - buf[7] = tohex ((*r >> 4) & 0x0f); - buf[8] = tohex (*r++ & 0x0f); - buf[9] = tohex ((*r >> 4) & 0x0f); - buf[10] = tohex (*r++ & 0x0f); - buf[11] = tohex ((*r >> 4) & 0x0f); - buf[12] = tohex (*r++ & 0x0f); - buf[13] = 0; - - send_with_reply (buf, buf, sizeof (buf)); /* FIXME, reply not used? */ - } -} - - -/* Prepare to store registers. */ - -static void -es1800_prepare_to_store () -{ - /* Do nothing, since we can store individual regs */ -} - -/* Convert hex digit A to a number. */ - -static int -fromhex (a) - int a; -{ - if (a >= '0' && a <= '9') - { - return a - '0'; - } - else if (a >= 'a' && a <= 'f') - { - return a - 'a' + 10; - } - else if (a >= 'A' && a <= 'F') - { - return a - 'A' + 10; - } - else - { - error ("Reply contains invalid hex digit"); - } - return (-1); -} - - -/* Convert number NIB to a hex digit. */ - -static int -tohex (nib) - int nib; -{ - if (nib < 10) - { - return ('0' + nib); - } - else - { - return ('A' + nib - 10); - } -} - -/* Read or write LEN bytes from inferior memory at MEMADDR, transferring - to or from debugger address MYADDR. Write to inferior if WRITE is - nonzero. Returns length of data written or read; 0 for error. - - memaddr - the target's address - myaddr - gdb's address - len - number of bytes - write - write if != 0 otherwise read */ - -static int -es1800_xfer_inferior_memory (memaddr, myaddr, len, write, tops) - CORE_ADDR memaddr; - char *myaddr; - int len; - int write; - struct target_ops *tops; /* Unused */ -{ - int origlen = len; - int xfersize; - - while (len > 0) - { - xfersize = len > MAXBUFBYTES ? MAXBUFBYTES : len; - if (write) - { - es1800_write_bytes (memaddr, myaddr, xfersize); - } - else - { - es1800_read_bytes (memaddr, myaddr, xfersize); - } - memaddr += xfersize; - myaddr += xfersize; - len -= xfersize; - } - return (origlen); /* no error possible */ -} - - -/* Write memory data directly to the emulator. - This does not inform the data cache; the data cache uses this. - MEMADDR is the address in the remote memory space. - MYADDR is the address of the buffer in our space. - LEN is the number of bytes. - - memaddr - the target's address - myaddr - gdb's address - len - number of bytes */ - -static void -es1800_write_bytes (memaddr, myaddr, len) - CORE_ADDR memaddr; - char *myaddr; - int len; -{ - char buf[PBUFSIZ]; - int i; - char *p; - - p = myaddr; - for (i = 0; i < len; i++) - { - sprintf (buf, "@.B$%x=$%x", memaddr+i, (*p++) & 0xff); - send_with_reply (buf, buf, sizeof (buf)); /* FIXME send_command? */ - } -} - - -/* Read memory data directly from the emulator. - This does not use the data cache; the data cache uses this. - - memaddr - the target's address - myaddr - gdb's address - len - number of bytes */ - -static void -es1800_read_bytes (memaddr, myaddr, len) - CORE_ADDR memaddr; - char *myaddr; - int len; -{ - static int DB_tab[16] = {8,11,14,17,20,23,26,29,34,37,40,43,46,49,52,55}; - char buf[PBUFSIZ]; - int i; - int low_addr; - char *p; - char *b; - - if (len > PBUFSIZ / 2 - 1) - { - abort (); - } - - if (len == 1) /* The emulator does not like expressions like: */ - { - len = 2; /* DB.B $20018 TO $20018 */ - } - - /* Reply describes registers byte by byte, each byte encoded as two hex - characters. */ - - sprintf (buf, "DB.B $%x TO $%x", memaddr, memaddr+len-1); - send_with_reply (buf, buf, sizeof (buf)); - b = buf; - low_addr = memaddr&0x0f; - for (i = low_addr; i < low_addr + len; i++) - { - if ((!(i % 16)) && i) - { /* if (i = 16,32,48) */ - while (*p++!='\n') {;} - b = p; - } - p = b + DB_tab[i%16] + (m68020 ? 2 : 0); - if (p[0] == 32 || p[1] == 32) - { - error ("Emulator reply is too short: %s", buf); - } - myaddr[i-low_addr] = fromhex (p[0]) * 16 + fromhex (p[1]); - } -} - -/* Information about the current target */ - -static void -es1800_files_info (tops) - struct target_ops *tops; /* Unused */ -{ - printf ("ES1800 Attached to %s at %d baud in %s mode\n", savename, 19200, - MODE); -} - - -/* We read the contents of the target location and stash it, - then overwrite it with a breakpoint instruction. - - addr - is the target location in the target machine. - contents_cache - is a pointer to memory allocated for saving the target contents. - It is guaranteed by the caller to be long enough to save sizeof - BREAKPOINT bytes. - - FIXME: This size is target_arch dependent and should be available in - the target_arch transfer vector, if we ever have one... */ - -static int -es1800_insert_breakpoint (addr, contents_cache) - CORE_ADDR addr; - char *contents_cache; -{ - int val; - - val = target_read_memory (addr, contents_cache, sizeof (es1800_break_insn)); - - if (val == 0) - { - val = target_write_memory (addr, es1800_break_insn, - sizeof (es1800_break_insn)); - } - - return (val); -} - - -/* Write back the stashed instruction - - addr - is the target location in the target machine. - contents_cache - is a pointer to memory allocated for saving the target contents. - It is guaranteed by the caller to be long enough to save sizeof - BREAKPOINT bytes. */ - -static int -es1800_remove_breakpoint (addr, contents_cache) - CORE_ADDR addr; - char *contents_cache; -{ - - return (target_write_memory (addr, contents_cache, - sizeof (es1800_break_insn))); -} - -/* create_break_insn () - Primitive datastructures containing the es1800 breakpoint instruction */ - -static void -es1800_create_break_insn (ins, vec) - char *ins; - int vec; -{ - if (vec == 15) - { - ins[0] = 0x4e; - ins[1] = 0x4f; - } -} - - -/* verify_break () - Seach for breakpoint routine in emulator memory. - returns non-zero on failure - vec - trap vector used for breakpoints */ - -static int -verify_break (vec) - int vec; -{ - CORE_ADDR memaddress; - char buf[8]; - char *instr = "NqNqNqNs"; /* breakpoint routine */ - int status; - - get_break_addr (vec, &memaddress); - - if (memaddress) - { - status = target_read_memory (memaddress, buf, 8); - if (status != 0) - { - memory_error (status, memaddress); - } - return (STRCMP (instr, buf)); - } - return (-1); -} - - -/* get_break_addr () - find address of breakpint routine - vec - trap vector used for breakpoints - addrp - store the address here */ - -static void -get_break_addr (vec, addrp) - int vec; - CORE_ADDR *addrp; -{ - CORE_ADDR memaddress = 0; - int status; - int k; - char buf[PBUFSIZ]; - char base_addr[4]; - char *p; - - if (m68020) - { - send_with_reply ("VBR ", buf, sizeof (buf)); - p = buf; - for (k = 0; k < 4; k++) - { - if ((p[k*2 + 1] == 0) || (p[k*2 + 2] == 0)) - { - error ("Emulator reply is too short: %s", buf); - } - base_addr[k] = (fromhex (p[k*2 + 1]) * 16) + fromhex (p[k*2 + 2]); - } - /* base addr of exception vector table */ - memaddress = *((CORE_ADDR *) base_addr); - } - - memaddress += (vec + 32) * 4; /* address of trap vector */ - status = target_read_memory (memaddress, (char *) addrp, 4); - if (status != 0) - { - memory_error (status, memaddress); - } -} - - -/* Kill an inferior process */ - -static void -es1800_kill () -{ - if (inferior_pid != 0) - { - inferior_pid = 0; - es1800_mourn_inferior (); - } -} - - -/* Load a file to the ES1800 emulator. - Converts the file from a.out format into Extended Tekhex format - before the file is loaded. - Also loads the trap routine, and sets the ES1800 breakpoint on it - filename - the a.out to be loaded - from_tty - says whether to be verbose or not - FIXME Uses emulator overlay memory for trap routine */ - -static void -es1800_load (filename, from_tty) - char *filename; - int from_tty; -{ - - FILE *instream; - char loadname[15]; - char buf[160]; - struct cleanup *old_chain; - int es1800_load_format = 5; - - if (es1800_desc < 0) - { - printf ("No emulator attached, type emulator-command first\n"); - return; - } - - filename = tilde_expand (filename); - make_cleanup (free, filename); - - switch (es1800_load_format) - { - case 2: /* Extended Tekhex */ - if (from_tty) - { - printf ("Converting \"%s\" to Extended Tekhex Format\n", filename); - } - sprintf (buf, "tekhex %s", filename); - system (buf); - sprintf (loadname, "out.hex"); - break; - - case 5: /* Motorola S-rec */ - if (from_tty) - { - printf ("Converting \"%s\" to Motorola S-record format\n", - filename); - } - /* in the future the source code in copy (part of binutils-1.93) will - be included in this file */ - sprintf (buf, - "copy -s \"a.out-sunos-big\" -d \"srec\" %s /tmp/out.hex", - filename); - system (buf); - sprintf (loadname, "/tmp/out.hex"); - break; - - default: - error ("Downloading format not defined\n"); - } - - mark_breakpoints_out (); - inferior_pid = 0; - if (from_tty) - { - printf ("Downloading \"%s\" to the ES 1800\n",filename); - } - if ((instream = fopen (loadname, "r")) == NULL) - { - perror_with_name ("fopen:"); - } - - old_chain = make_cleanup (fclose, instream); - immediate_quit++; - - es1800_reset (0); - - download (instream, from_tty, es1800_load_format); - - /* if breakpoint routine is not present anymore we have to check - whether to download a new breakpoint routine or not */ - - if ((verify_break (es1800_break_vec) != 0) - && query ("No breakpoint routine in ES 1800 emulator!\nDownload a breakpoint routine to the emulator? ")) - { - char buf[128]; - printf ("Using break vector 0x%x\n", es1800_break_vec); - sprintf (buf, "0x%x ", es1800_break_vec); - printf ("Give the start address of the breakpoint routine: "); - fgets (buf + strlen (buf), sizeof (buf) - strlen (buf), stdin); - es1800_init_break (buf, 0); - } - - do_cleanups (old_chain); - expect_prompt (); - readchar (); /* FIXME I am getting a ^G = 7 after the prompt */ - printf ("\n"); - - if (fclose (instream) == EOF) - { - ; - } - - if (es1800_load_format != 2) - { - sprintf (buf, "/usr/bin/rm %s", loadname); - system (buf); - } - - symbol_file_command (filename, from_tty); /* reading symbol table */ - immediate_quit--; -} - -#if 0 - -#define NUMCPYBYTES 20 - -static void -bfd_copy (from_bfd, to_bfd) - bfd *from_bfd; - bfd *to_bfd; -{ - asection *p, *new; - int i; - char buf[NUMCPYBYTES]; - - for (p = from_bfd->sections; p != NULL; p = p->next) - { - printf (" Copying section %s. Size = %x.\n", p->name, p->_cooked_size); - printf (" vma = %x, offset = %x, output_sec = %x\n", - p->vma, p->output_offset, p->output_section); - new = bfd_make_section (to_bfd, p->name); - if (p->_cooked_size && - !bfd_set_section_size (to_bfd, new, p->_cooked_size)) - { - error ("Wrong BFD size!\n"); - } - if (!bfd_set_section_flags (to_bfd, new, p->flags)) - { - error ("bfd_set_section_flags"); - } - new->vma = p->vma; - - for (i = 0; (i + NUMCPYBYTES) < p->_cooked_size ; i += NUMCPYBYTES) - { - if (!bfd_get_section_contents (from_bfd, p, (PTR) buf, (file_ptr) i, - (bfd_size_type) NUMCPYBYTES)) - { - error ("bfd_get_section_contents\n"); - } - if (!bfd_set_section_contents (to_bfd, new, (PTR) buf, (file_ptr) i, - (bfd_size_type) NUMCPYBYTES)) - { - error ("bfd_set_section_contents\n"); - } - } - bfd_get_section_contents (from_bfd, p, (PTR) buf, (file_ptr) i, - (bfd_size_type) (p->_cooked_size - i)); - bfd_set_section_contents (to_bfd, new, (PTR) buf,(file_ptr) i, - (bfd_size_type) (p->_cooked_size - i)); - } -} - -#endif - -/* Start an process on the es1800 and set inferior_pid to the new - process' pid. - execfile - the file to run - args - arguments passed to the program - env - the environment vector to pass */ - -static void -es1800_create_inferior (execfile, args, env) - char *execfile; - char *args; - char **env; -{ - int entry_pt; - int pid; -#if 0 - struct expression *expr; - register struct cleanup *old_chain = 0; - register value val; -#endif - - if (args && *args) - { - error ("Can't pass arguments to remote ES1800 process"); - } - -#if 0 - if (query ("Use 'start' as entry point? ")) - { - expr = parse_c_expression ("start"); - old_chain = make_cleanup (free_current_contents, &expr); - val = evaluate_expression (expr); - entry_pt = (val->location).address; - } - else - { - printf ("Enter the program's entry point (in hexadecimal): "); - scanf ("%x", &entry_pt); - } -#endif - - if (execfile == 0 || exec_bfd == 0) - { - error ("No exec file specified"); - } - - entry_pt = (int) bfd_get_start_address (exec_bfd); - - pid = 42; - - /* Now that we have a child process, make it our target. */ - - push_target (&es1800_child_ops); - - /* The "process" (board) is already stopped awaiting our commands, and - the program is already downloaded. We just set its PC and go. */ - - inferior_pid = pid; /* Needed for wait_for_inferior below */ - - clear_proceed_status (); - - /* Tell wait_for_inferior that we've started a new process. */ - - init_wait_for_inferior (); - - /* Set up the "saved terminal modes" of the inferior - based on what modes we are starting it with. */ - - target_terminal_init (); - - /* Install inferior's terminal modes. */ - - target_terminal_inferior (); - - /* remote_start (args); */ - /* trap_expected = 0; */ - /* insert_step_breakpoint (); FIXME, do we need this? */ - - proceed ((CORE_ADDR) entry_pt, -1, 0); /* Let 'er rip... */ - -} - - -/* The process has died, clean up. */ - -static void -es1800_mourn_inferior () -{ - remove_breakpoints (); - unpush_target (&es1800_child_ops); - generic_mourn_inferior (); /* Do all the proper things now */ -} - -/* ES1800-protocol specific routines */ - -/* Keep discarding input from the remote system, until STRING is found. - Let the user break out immediately. - string - the string to expect - nowait - break out if string not the emulator's first respond otherwise - read until string is found (== 0) */ - -static void -expect (string, nowait) - char *string; - int nowait; -{ - char c; - char *p = string; - - immediate_quit++; - while (1) - { - c = readchar (); - if (isalpha (c)) - { - c = toupper (c); - } - if (c == toupper (*p)) - { - p++; - if (*p == '\0') - { - immediate_quit--; - return; - } - } - else if (!nowait) - { - p = string; - } - else - { - printf ("\'%s\' expected\n" , string); - printf ("char %d is %d", p - string, c); - error ("\n" ); - } - } -} - -/* Keep discarding input until we see the prompt. */ - -static void -expect_prompt () -{ - expect (">", 0); -} - - -/* Read one character */ - -#ifdef DEBUG_STDIN - -/* read from stdin */ - -static int -readchar () -{ - char buf[1]; - - buf[0] = '\0'; - printf ("readchar, give one character\n"); - read (0, buf, 1); - -#if defined (LOG_FILE) - putc (buf[0] & 0x7f, log_file); -#endif - - return (buf[0] & 0x7f); -} - -#else /* !DEBUG_STDIN */ - -/* Read a character from the remote system, doing all the fancy - timeout stuff. */ - -static int -readchar () -{ - char buf[1]; - - buf[0] = '\0'; - -#ifdef HAVE_TERMIO - - /* termio does the timeout for us. */ - read (es1800_desc, buf, 1); - -#else - - alarm (timeout); - while (read (es1800_desc, buf, 1) != 1) - { - if (errno == EINTR) - { - error ("Timeout reading from remote system."); - } - else if (errno != EWOULDBLOCK) - { - perror_with_name ("remote read"); - } - } - alarm (0); -#endif - -#if defined (LOG_FILE) - putc (buf[0] & 0x7f, log_file); - fflush (log_file); -#endif - - return (buf[0] & 0x7f); -} - -#endif /* DEBUG_STDIN */ - - -/* Send a command to the emulator and save the reply. - Report an error if we get an error reply. - string - the es1800 command - buf - containing the emulator reply on return - len - size of buf */ - -static void -send_with_reply (string, buf, len) - char *string, *buf; - int len; -{ - send (string); - write (es1800_desc, "\r", 1); - -#ifndef DEBUG_STDIN - expect (string, 1); - expect ("\r\n", 0); -#endif - - getmessage (buf, len); -} - - -/* Send the command in STR to the emulator adding \r. check - the echo for consistency. - string - the es1800 command */ - -static void -send_command (string) - char *string; -{ - send (string); - write (es1800_desc, "\r", 1); - -#ifndef DEBUG_STDIN - expect (string, 0); - expect_prompt (); -#endif - -} - -/* Send a string - string - the es1800 command */ - -static void -send (string) - char *string; -{ - if (kiodebug) - { - fprintf (stderr, "Sending: %s\n", string); - } - write (es1800_desc, string, strlen (string)); -} - - -/* Read a message from the emulator and store it in BUF. - buf - containing the emulator reply on return - len - size of buf */ - -static void -getmessage (buf, len) - char *buf; - int len; -{ - char *bp; - int c; - int prompt_found = 0; - extern kiodebug; - -#if defined (LOG_FILE) - /* This is a convenient place to do this. The idea is to do it often - enough that we never lose much data if we terminate abnormally. */ - fflush (log_file); -#endif - - bp = buf; - c = readchar (); - do - { - if (c) - { - if (len-- < 2) /* char and terminaling NULL */ - { - error ("input buffer overrun\n"); - } - *bp++ = c; - } - c = readchar (); - if ((c == '>') && (*(bp - 1) == ' ')) - { - prompt_found = 1; - } - } - while (!prompt_found); - *bp = 0; - - if (kiodebug) - { - fprintf (stderr,"message received :%s\n", buf); - } -} - -static void -download (instream, from_tty, format) -FILE *instream; - int from_tty; - int format; -{ - char c; - char buf[160]; - int i = 0; - - send_command ("SET #2,$1A"); /* reset char = ^Z */ - send_command ("SET #3,$11,$13"); /* XON XOFF */ - if (format == 2) - { - send_command ("SET #26,#2"); - } - else - { - send_command ("SET #26,#5"); /* Format=Extended Tekhex */ - } - send_command ("DFB = $10"); - send_command ("PUR"); - send_command ("CES"); - send ("DNL\r"); - expect ("DNL", 1); - if (from_tty) - { - printf (" 0 records loaded...\r"); - } - while (fgets (buf, 160, instream)) - { - send (buf); - if (from_tty) - { - printf ("%5d\b\b\b\b\b",++i); - fflush (stdout); - } - if ((c = readchar ()) != 006) - { - error ("expected ACK"); - } - } - if (from_tty) - { - printf ("- All"); - } -} - -/* Additional commands */ - -/* Talk directly to the emulator - FIXME, uses busy wait, and is SUNOS (or at least BSD) specific */ - -/*ARGSUSED*/ -static void -es1800_transparent (args, from_tty) - char *args; - int from_tty; -{ - int console; - struct sgttyb modebl; - int fcflag; - int cc; - struct sgttyb console_mode_save; - int console_fc_save; - int es1800_fc_save; - int inputcnt = 80; - char inputbuf[80]; - int consolecnt = 0; - char consolebuf[80]; - int es1800_cnt = 0; - char es1800_buf[80]; - int i; - - dont_repeat (); - if (es1800_desc < 0) - { - printf ("No emulator attached, type emulator-command first\n"); - return; - } - - printf ("\n"); - printf ("You are now communicating directly with the ES 1800 emulator.\n"); - printf ("To leave this mode (transparent mode), press ^E.\n"); - printf ("\n"); - printf (" >"); - fflush (stdout); - - if ((console = open ("/dev/tty", O_RDWR)) == -1) - { - perror_with_name ("/dev/tty:"); - } - - if ((fcflag = fcntl (console, F_GETFL, 0)) == -1) - { - perror_with_name ("fcntl console"); - } - - console_fc_save = fcflag; - fcflag = fcflag | FNDELAY; - - if (fcntl (console, F_SETFL, fcflag) == -1) - { - perror_with_name ("fcntl console"); - } - - if (ioctl (console, TIOCGETP, &modebl)) - { - perror_with_name ("ioctl console"); - } - - console_mode_save = modebl; - modebl.sg_flags = RAW; - - if (ioctl (console, TIOCSETP, &modebl)) - { - perror_with_name ("ioctl console"); - } - - if ((fcflag = fcntl (es1800_desc, F_GETFL, 0)) == -1) - { - perror_with_name ("fcntl serial"); - } - - es1800_fc_save = fcflag; - fcflag = fcflag | FNDELAY; - - if (fcntl (es1800_desc, F_SETFL, fcflag) == -1) - { - perror_with_name ("fcntl serial"); - } - - while (1) - { - cc = read (console, inputbuf, inputcnt); - if (cc != -1) - { - if ((*inputbuf & 0x7f) == 0x05) - { - break; - } - for (i = 0; i < cc; ) - { - es1800_buf[es1800_cnt++] = inputbuf[i++]; - } - if ((cc = write (es1800_desc, es1800_buf, es1800_cnt)) == -1) - { - perror_with_name ("FEL! read:"); - } - es1800_cnt -= cc; - if (es1800_cnt && cc) - { - for (i = 0; i < es1800_cnt; i++) - { - es1800_buf[i] = es1800_buf[cc+i]; - } - } - } - else if (errno != EWOULDBLOCK) - { - perror_with_name ("FEL! read:"); - } - - cc = read (es1800_desc,inputbuf,inputcnt); - if (cc != -1) - { - for (i = 0; i < cc; ) - { - consolebuf[consolecnt++] = inputbuf[i++]; - } - if ((cc = write (console,consolebuf,consolecnt)) == -1) - { - perror_with_name ("FEL! write:"); - } - consolecnt -= cc; - if (consolecnt && cc) - { - for (i = 0; i < consolecnt; i++) - { - consolebuf[i] = consolebuf[cc+i]; - } - } - } - else if (errno != EWOULDBLOCK) - { - perror_with_name ("FEL! read:"); - } - } - - console_fc_save = console_fc_save & !FNDELAY; - if (fcntl (console, F_SETFL, console_fc_save) == -1) - { - perror_with_name ("FEL! fcntl"); - } - - if (ioctl (console, TIOCSETP, &console_mode_save)) - { - perror_with_name ("FEL! ioctl"); - } - - close (console); - - if (fcntl (es1800_desc, F_SETFL, es1800_fc_save) == -1) - { - perror_with_name ("FEL! fcntl"); - } - - printf ("\n"); - -} - -static void -es1800_init_break (args, from_tty) - char *args; - int from_tty; -{ - CORE_ADDR memaddress = 0; - char buf[PBUFSIZ]; - char base_addr[4]; - char *space_index; - char *p; - int k; - - if (args == NULL) - { - error_no_arg ("a trap vector"); - } - - if (!(space_index = strchr (args, ' '))) - { - error ("Two arguments needed (trap vector and address of break routine).\n"); - } - - *space_index = '\0'; - - es1800_break_vec = strtol (args, (char **) NULL, 0); - es1800_break_address = parse_and_eval_address (space_index + 1); - - es1800_create_break_insn (es1800_break_insn, es1800_break_vec); - - if (m68020) - { - send_with_reply ("VBR ", buf, sizeof (buf)); - p = buf; - for (k = 0; k < 4; k++) - { - if ((p[k*2 + 1] == 0) || (p[k*2 + 2] == 0)) - { - error ("Emulator reply is too short: %s", buf); - } - base_addr[k] = (fromhex (p[k*2 + 1]) * 16) + fromhex (p[k*2 + 2]); - } - /* base addr of exception vector table */ - memaddress = *((CORE_ADDR *) base_addr); - } - - memaddress += (es1800_break_vec + 32) * 4; /* address of trap vector */ - - sprintf (buf, "@.L%lx=$%lx", memaddress, es1800_break_address); - send_command (buf); /* set the address of the break routine in the */ - /* trap vector */ - - sprintf (buf, "@.L%lx=$4E714E71", es1800_break_address); /* NOP; NOP */ - send_command (buf); - sprintf (buf, "@.L%lx=$4E714E73", es1800_break_address + 4); /* NOP; RTE */ - send_command (buf); - - sprintf (buf, "AC2=$%lx", es1800_break_address + 4); - /* breakpoint at es1800-break_address */ - send_command (buf); - send_command ("WHEN AC2 THEN BRK"); /* ie in exception routine */ - - if (from_tty) - { - printf ("Breakpoint (trap $%x) routine at address: %lx\n", - es1800_break_vec, es1800_break_address); - } -} - -static void -es1800_child_open (arg, from_tty) - char *arg; - int from_tty; -{ - error ("Use the \"run\" command to start a child process."); -} - -static void -es1800_child_detach (args, from_tty) - char *args; - int from_tty; -{ - if (args) - { - error ("Argument given to \"detach\" when remotely debugging."); - } - - pop_target (); - if (from_tty) - { - printf ("Ending debugging the process %d.\n", inferior_pid); - } -} - - -/* Define the target subroutine names */ - -static struct target_ops es1800_ops = -{ - "es1800", /* to_shortname */ - /* to_longname */ - "Remote serial target in ES1800-emulator protocol", - /* to_doc */ - "Remote debugging on the es1800 emulator via a serial line.\n\ -Specify the serial device it is connected to (e.g. /dev/ttya).", - es1800_open, /* to_open */ - es1800_close, /* to_close */ - es1800_attach, /* to_attach */ - es1800_detach, /* to_detach */ - es1800_resume, /* to_resume */ - NULL, /* to_wait */ - NULL, /* to_fetch_registers */ - NULL, /* to_store_registers */ - es1800_prepare_to_store, /* to_prepare_to_store */ - es1800_xfer_inferior_memory, /* to_xfer_memory */ - es1800_files_info, /* to_files_info */ - es1800_insert_breakpoint, /* to_insert_breakpoint */ - es1800_remove_breakpoint, /* to_remove_breakpoint */ - NULL, /* to_terminal_init */ - NULL, /* to_terminal_inferior */ - NULL, /* to_terminal_ours_for_output */ - NULL, /* to_terminal_ours */ - NULL, /* to_terminal_info */ - NULL, /* to_kill */ - es1800_load, /* to_load */ - NULL, /* to_lookup_symbol */ - es1800_create_inferior, /* to_create_inferior */ - NULL, /* to_mourn_inferior */ - 0, /* to_can_run */ - 0, /* notice_signals */ - core_stratum, /* to_stratum */ - 0, /* to_next */ - 0, /* to_has_all_memory */ - 1, /* to_has_memory */ - 0, /* to_has_stack */ - 0, /* to_has_registers */ - 0, /* to_has_execution */ - NULL, /* to_sections */ - NULL, /* to_sections_end */ - OPS_MAGIC /* to_magic (always last) */ -}; - -/* Define the target subroutine names */ - -static struct target_ops es1800_child_ops = -{ - "es1800_process", /* to_shortname */ - /* to_longname */ - "Remote serial target in ES1800-emulator protocol", - /* to_doc */ - "Remote debugging on the es1800 emulator via a serial line.\n\ -Specify the serial device it is connected to (e.g. /dev/ttya).", - es1800_child_open, /* to_open */ - NULL, /* to_close */ - es1800_attach, /* to_attach */ - es1800_child_detach, /* to_detach */ - es1800_resume, /* to_resume */ - es1800_wait, /* to_wait */ - es1800_fetch_register, /* to_fetch_registers */ - es1800_store_register, /* to_store_registers */ - es1800_prepare_to_store, /* to_prepare_to_store */ - es1800_xfer_inferior_memory, /* to_xfer_memory */ - es1800_files_info, /* to_files_info */ - es1800_insert_breakpoint, /* to_insert_breakpoint */ - es1800_remove_breakpoint, /* to_remove_breakpoint */ - NULL, /* to_terminal_init */ - NULL, /* to_terminal_inferior */ - NULL, /* to_terminal_ours_for_output */ - NULL, /* to_terminal_ours */ - NULL, /* to_terminal_info */ - es1800_kill, /* to_kill */ - es1800_load, /* to_load */ - NULL, /* to_lookup_symbol */ - es1800_create_inferior, /* to_create_inferior */ - es1800_mourn_inferior, /* to_mourn_inferior */ - 0, /* to_can_run */ - 0, /* notice_signals */ - process_stratum, /* to_stratum */ - 0, /* to_next */ - 1, /* to_has_all_memory */ - 1, /* to_has_memory */ - 1, /* to_has_stack */ - 1, /* to_has_registers */ - 1, /* to_has_execution */ - NULL, /* to_sections */ - NULL, /* to_sections_end */ - OPS_MAGIC /* to_magic (always last) */ -}; - -/* _initialize_es1800 () */ - -void -_initialize_es1800 () -{ - add_target (&es1800_ops); - add_target (&es1800_child_ops); - add_com ("transparent", class_support, es1800_transparent, - "Start transparent communication with the ES 1800 emulator."); - add_com ("init_break", class_support, es1800_init_break, - "Download break routine and initialize break facility on ES 1800"); -} diff --git a/gdb/remote-st2000.c b/gdb/remote-st2000.c index 833aa206760..e69de29bb2d 100644 --- a/gdb/remote-st2000.c +++ b/gdb/remote-st2000.c @@ -1,833 +0,0 @@ -/* Remote debugging interface for Tandem ST2000 phone switch, for GDB. - Copyright 1990, 1991, 1992 Free Software Foundation, Inc. - Contributed by Cygnus Support. Written by Jim Kingdon for Cygnus. - -This file is part of GDB. - -This program is free software; you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation; either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program; if not, write to the Free Software -Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ - -/* This file was derived from remote-eb.c, which did a similar job, but for - an AMD-29K running EBMON. That file was in turn derived from remote.c - as mentioned in the following comment (left in for comic relief): - - "This is like remote.c but is for an esoteric situation-- - having an a29k board in a PC hooked up to a unix machine with - a serial line, and running ctty com1 on the PC, through which - the unix machine can run ebmon. Not to mention that the PC - has PC/NFS, so it can access the same executables that gdb can, - over the net in real time." - - In reality, this module talks to a debug monitor called 'STDEBUG', which - runs in a phone switch. We communicate with STDEBUG via either a direct - serial line, or a TCP (or possibly TELNET) stream to a terminal multiplexor, - which in turn talks to the phone switch. */ - -#include "defs.h" -#include "gdbcore.h" -#include "target.h" -#include "wait.h" -#include -#include -#include -#include -#include "serial.h" - -extern struct target_ops st2000_ops; /* Forward declaration */ - -static void st2000_close(); -static void st2000_fetch_register(); -static void st2000_store_register(); - -#define LOG_FILE "st2000.log" -#if defined (LOG_FILE) -FILE *log_file; -#endif - -static int timeout = 24; - -/* Descriptor for I/O to remote machine. Initialize it to -1 so that - st2000_open knows that we don't have a file open when the program - starts. */ - -static serial_t st2000_desc; - -/* Send data to stdebug. Works just like printf. */ - -static void -printf_stdebug(va_alist) - va_dcl -{ - va_list args; - char *pattern; - char buf[200]; - - va_start(args); - - pattern = va_arg(args, char *); - - vsprintf(buf, pattern, args); - if (SERIAL_WRITE(st2000_desc, buf, strlen(buf))) - fprintf(stderr, "SERIAL_WRITE failed: %s\n", safe_strerror(errno)); -} - -/* Read a character from the remote system, doing all the fancy timeout - stuff. */ - -static int -readchar(timeout) - int timeout; -{ - int c; - - c = SERIAL_READCHAR(st2000_desc, timeout); - -#ifdef LOG_FILE - putc(c & 0x7f, log_file); -#endif - - if (c >= 0) - return c & 0x7f; - - if (c == SERIAL_TIMEOUT) - { - if (timeout == 0) - return c; /* Polls shouldn't generate timeout errors */ - - error("Timeout reading from remote system."); - } - - perror_with_name("remote-st2000"); -} - -/* Scan input from the remote system, until STRING is found. If DISCARD is - non-zero, then discard non-matching input, else print it out. - Let the user break out immediately. */ -static void -expect(string, discard) - char *string; - int discard; -{ - char *p = string; - int c; - - immediate_quit = 1; - while (1) - { - c = readchar(timeout); - if (c == *p++) - { - if (*p == '\0') - { - immediate_quit = 0; - return; - } - } - else - { - if (!discard) - { - fwrite(string, 1, (p - 1) - string, stdout); - putchar((char)c); - fflush(stdout); - } - p = string; - } - } -} - -/* Keep discarding input until we see the STDEBUG prompt. - - The convention for dealing with the prompt is that you - o give your command - o *then* wait for the prompt. - - Thus the last thing that a procedure does with the serial line - will be an expect_prompt(). Exception: st2000_resume does not - wait for the prompt, because the terminal is being handed over - to the inferior. However, the next thing which happens after that - is a st2000_wait which does wait for the prompt. - Note that this includes abnormal exit, e.g. error(). This is - necessary to prevent getting into states from which we can't - recover. */ -static void -expect_prompt(discard) - int discard; -{ -#if defined (LOG_FILE) - /* This is a convenient place to do this. The idea is to do it often - enough that we never lose much data if we terminate abnormally. */ - fflush(log_file); -#endif - expect ("dbug> ", discard); -} - -/* Get a hex digit from the remote system & return its value. - If ignore_space is nonzero, ignore spaces (not newline, tab, etc). */ -static int -get_hex_digit(ignore_space) - int ignore_space; -{ - int ch; - while (1) - { - ch = readchar(timeout); - if (ch >= '0' && ch <= '9') - return ch - '0'; - else if (ch >= 'A' && ch <= 'F') - return ch - 'A' + 10; - else if (ch >= 'a' && ch <= 'f') - return ch - 'a' + 10; - else if (ch == ' ' && ignore_space) - ; - else - { - expect_prompt(1); - error("Invalid hex digit from remote system."); - } - } -} - -/* Get a byte from stdebug and put it in *BYT. Accept any number - leading spaces. */ -static void -get_hex_byte (byt) - char *byt; -{ - int val; - - val = get_hex_digit (1) << 4; - val |= get_hex_digit (0); - *byt = val; -} - -/* Get N 32-bit words from remote, each preceded by a space, - and put them in registers starting at REGNO. */ -static void -get_hex_regs (n, regno) - int n; - int regno; -{ - long val; - int i; - - for (i = 0; i < n; i++) - { - int j; - - val = 0; - for (j = 0; j < 8; j++) - val = (val << 4) + get_hex_digit (j == 0); - supply_register (regno++, (char *) &val); - } -} - -/* This is called not only when we first attach, but also when the - user types "run" after having attached. */ -static void -st2000_create_inferior (execfile, args, env) - char *execfile; - char *args; - char **env; -{ - int entry_pt; - - if (args && *args) - error("Can't pass arguments to remote STDEBUG process"); - - if (execfile == 0 || exec_bfd == 0) - error("No exec file specified"); - - entry_pt = (int) bfd_get_start_address (exec_bfd); - -#ifdef CREATE_INFERIOR_HOOK - CREATE_INFERIOR_HOOK (0); /* No process-ID */ -#endif - -/* The "process" (board) is already stopped awaiting our commands, and - the program is already downloaded. We just set its PC and go. */ - - clear_proceed_status (); - - /* Tell wait_for_inferior that we've started a new process. */ - init_wait_for_inferior (); - - /* Set up the "saved terminal modes" of the inferior - based on what modes we are starting it with. */ - target_terminal_init (); - - /* Install inferior's terminal modes. */ - target_terminal_inferior (); - - /* insert_step_breakpoint (); FIXME, do we need this? */ - proceed ((CORE_ADDR)entry_pt, -1, 0); /* Let 'er rip... */ -} - -/* Open a connection to a remote debugger. - NAME is the filename used for communication. */ - -static int baudrate = 9600; -static char dev_name[100]; - -static void -st2000_open(args, from_tty) - char *args; - int from_tty; -{ - int n; - char junk[100]; - - target_preopen(from_tty); - - n = sscanf(args, " %s %d %s", dev_name, &baudrate, junk); - - if (n != 2) - error("Bad arguments. Usage: target st2000 \n\ -or target st2000 \n"); - - st2000_close(0); - - st2000_desc = SERIAL_OPEN(dev_name); - - if (!st2000_desc) - perror_with_name(dev_name); - - SERIAL_SETBAUDRATE(st2000_desc, baudrate); - - SERIAL_RAW(st2000_desc); - - push_target(&st2000_ops); - -#if defined (LOG_FILE) - log_file = fopen (LOG_FILE, "w"); - if (log_file == NULL) - perror_with_name (LOG_FILE); -#endif - - /* Hello? Are you there? */ - printf_stdebug("\003"); /* ^C wakes up dbug */ - - expect_prompt(1); - - if (from_tty) - printf("Remote %s connected to %s\n", target_shortname, - dev_name); -} - -/* Close out all files and local state before this target loses control. */ - -static void -st2000_close (quitting) - int quitting; -{ - SERIAL_CLOSE(st2000_desc); - -#if defined (LOG_FILE) - if (log_file) { - if (ferror(log_file)) - fprintf(stderr, "Error writing log file.\n"); - if (fclose(log_file) != 0) - fprintf(stderr, "Error closing log file.\n"); - } -#endif -} - -/* Terminate the open connection to the remote debugger. - Use this when you want to detach and do something else - with your gdb. */ -static void -st2000_detach (from_tty) - int from_tty; -{ - pop_target(); /* calls st2000_close to do the real work */ - if (from_tty) - printf ("Ending remote %s debugging\n", target_shortname); -} - -/* Tell the remote machine to resume. */ - -static void -st2000_resume (step, sig) - int step, sig; -{ - if (step) - { - printf_stdebug ("ST\r"); - /* Wait for the echo. */ - expect ("ST\r", 1); - } - else - { - printf_stdebug ("GO\r"); - /* Swallow the echo. */ - expect ("GO\r", 1); - } -} - -/* Wait until the remote machine stops, then return, - storing status in STATUS just as `wait' would. */ - -static int -st2000_wait (status) - WAITTYPE *status; -{ - int old_timeout = timeout; - - WSETEXIT ((*status), 0); - - timeout = 0; /* Don't time out -- user program is running. */ - - expect_prompt(0); /* Wait for prompt, outputting extraneous text */ - - WSETSTOP ((*status), SIGTRAP); - - timeout = old_timeout; - - return 0; -} - -/* Return the name of register number REGNO in the form input and output by - STDEBUG. Currently, REGISTER_NAMES just happens to contain exactly what - STDEBUG wants. Lets take advantage of that just as long as possible! */ - -static char * -get_reg_name (regno) - int regno; -{ - static char buf[50]; - const char *p; - char *b; - - b = buf; - - for (p = reg_names[regno]; *p; p++) - *b++ = toupper(*p); - *b = '\000'; - - return buf; -} - -/* Read the remote registers into the block REGS. */ - -static void -st2000_fetch_registers () -{ - int regno; - - /* Yeah yeah, I know this is horribly inefficient. But it isn't done - very often... I'll clean it up later. */ - - for (regno = 0; regno <= PC_REGNUM; regno++) - st2000_fetch_register(regno); -} - -/* Fetch register REGNO, or all registers if REGNO is -1. - Returns errno value. */ -static void -st2000_fetch_register (regno) - int regno; -{ - if (regno == -1) - st2000_fetch_registers (); - else - { - char *name = get_reg_name (regno); - printf_stdebug ("DR %s\r", name); - expect (name, 1); - expect (" : ", 1); - get_hex_regs (1, regno); - expect_prompt (1); - } - return; -} - -/* Store the remote registers from the contents of the block REGS. */ - -static void -st2000_store_registers () -{ - int regno; - - for (regno = 0; regno <= PC_REGNUM; regno++) - st2000_store_register(regno); - - registers_changed (); -} - -/* Store register REGNO, or all if REGNO == 0. - Return errno value. */ -static void -st2000_store_register (regno) - int regno; -{ - if (regno == -1) - st2000_store_registers (); - else - { - printf_stdebug ("PR %s %x\r", get_reg_name (regno), - read_register (regno)); - - expect_prompt (1); - } -} - -/* Get ready to modify the registers array. On machines which store - individual registers, this doesn't need to do anything. On machines - which store all the registers in one fell swoop, this makes sure - that registers contains all the registers from the program being - debugged. */ - -static void -st2000_prepare_to_store () -{ - /* Do nothing, since we can store individual regs */ -} - -static void -st2000_files_info () -{ - printf ("\tAttached to %s at %d baud.\n", - dev_name, baudrate); -} - -/* Copy LEN bytes of data from debugger memory at MYADDR - to inferior's memory at MEMADDR. Returns length moved. */ -static int -st2000_write_inferior_memory (memaddr, myaddr, len) - CORE_ADDR memaddr; - unsigned char *myaddr; - int len; -{ - int i; - - for (i = 0; i < len; i++) - { - printf_stdebug ("PM.B %x %x\r", memaddr + i, myaddr[i]); - expect_prompt (1); - } - return len; -} - -/* Read LEN bytes from inferior memory at MEMADDR. Put the result - at debugger address MYADDR. Returns length moved. */ -static int -st2000_read_inferior_memory(memaddr, myaddr, len) - CORE_ADDR memaddr; - char *myaddr; - int len; -{ - int i; - - /* Number of bytes read so far. */ - int count; - - /* Starting address of this pass. */ - unsigned long startaddr; - - /* Number of bytes to read in this pass. */ - int len_this_pass; - - /* Note that this code works correctly if startaddr is just less - than UINT_MAX (well, really CORE_ADDR_MAX if there was such a - thing). That is, something like - st2000_read_bytes (CORE_ADDR_MAX - 4, foo, 4) - works--it never adds len to memaddr and gets 0. */ - /* However, something like - st2000_read_bytes (CORE_ADDR_MAX - 3, foo, 4) - doesn't need to work. Detect it and give up if there's an attempt - to do that. */ - if (((memaddr - 1) + len) < memaddr) { - errno = EIO; - return 0; - } - - startaddr = memaddr; - count = 0; - while (count < len) - { - len_this_pass = 16; - if ((startaddr % 16) != 0) - len_this_pass -= startaddr % 16; - if (len_this_pass > (len - count)) - len_this_pass = (len - count); - - printf_stdebug ("DI.L %x %x\r", startaddr, len_this_pass); - expect (": ", 1); - - for (i = 0; i < len_this_pass; i++) - get_hex_byte (&myaddr[count++]); - - expect_prompt (1); - - startaddr += len_this_pass; - } - return len; -} - -/* FIXME-someday! Merge these two. */ -static int -st2000_xfer_inferior_memory (memaddr, myaddr, len, write, target) - CORE_ADDR memaddr; - char *myaddr; - int len; - int write; - struct target_ops *target; /* ignored */ -{ - if (write) - return st2000_write_inferior_memory (memaddr, myaddr, len); - else - return st2000_read_inferior_memory (memaddr, myaddr, len); -} - -static void -st2000_kill (args, from_tty) - char *args; - int from_tty; -{ - return; /* Ignore attempts to kill target system */ -} - -/* Clean up when a program exits. - - The program actually lives on in the remote processor's RAM, and may be - run again without a download. Don't leave it full of breakpoint - instructions. */ - -static void -st2000_mourn_inferior () -{ - remove_breakpoints (); - unpush_target (&st2000_ops); - generic_mourn_inferior (); /* Do all the proper things now */ -} - -#define MAX_STDEBUG_BREAKPOINTS 16 - -extern int memory_breakpoint_size; -static CORE_ADDR breakaddr[MAX_STDEBUG_BREAKPOINTS] = {0}; - -static int -st2000_insert_breakpoint (addr, shadow) - CORE_ADDR addr; - char *shadow; -{ - int i; - - for (i = 0; i <= MAX_STDEBUG_BREAKPOINTS; i++) - if (breakaddr[i] == 0) - { - breakaddr[i] = addr; - - st2000_read_inferior_memory(addr, shadow, memory_breakpoint_size); - printf_stdebug("BR %x H\r", addr); - expect_prompt(1); - return 0; - } - - fprintf(stderr, "Too many breakpoints (> 16) for STDBUG\n"); - return 1; -} - -static int -st2000_remove_breakpoint (addr, shadow) - CORE_ADDR addr; - char *shadow; -{ - int i; - - for (i = 0; i < MAX_STDEBUG_BREAKPOINTS; i++) - if (breakaddr[i] == addr) - { - breakaddr[i] = 0; - - printf_stdebug("CB %d\r", i); - expect_prompt(1); - return 0; - } - - fprintf(stderr, "Can't find breakpoint associated with 0x%x\n", addr); - return 1; -} - - -/* Put a command string, in args, out to STDBUG. Output from STDBUG is placed - on the users terminal until the prompt is seen. */ - -static void -st2000_command (args, fromtty) - char *args; - int fromtty; -{ - if (!st2000_desc) - error("st2000 target not open."); - - if (!args) - error("Missing command."); - - printf_stdebug("%s\r", args); - expect_prompt(0); -} - -/* Connect the user directly to STDBUG. This command acts just like the - 'cu' or 'tip' command. Use ~. or ~^D to break out. */ - -/*static struct ttystate ttystate;*/ - -static void -cleanup_tty() -{ - printf("\r\n[Exiting connect mode]\r\n"); -/* SERIAL_RESTORE(0, &ttystate);*/ -} - -#if 0 -/* This all should now be in serial.c */ - -static void -connect_command (args, fromtty) - char *args; - int fromtty; -{ - fd_set readfds; - int numfds; - int c; - char cur_esc = 0; - - dont_repeat(); - - if (st2000_desc < 0) - error("st2000 target not open."); - - if (args) - fprintf("This command takes no args. They have been ignored.\n"); - - printf("[Entering connect mode. Use ~. or ~^D to escape]\n"); - - serial_raw(0, &ttystate); - - make_cleanup(cleanup_tty, 0); - - FD_ZERO(&readfds); - - while (1) - { - do - { - FD_SET(0, &readfds); - FD_SET(st2000_desc, &readfds); - numfds = select(sizeof(readfds)*8, &readfds, 0, 0, 0); - } - while (numfds == 0); - - if (numfds < 0) - perror_with_name("select"); - - if (FD_ISSET(0, &readfds)) - { /* tty input, send to stdebug */ - c = getchar(); - if (c < 0) - perror_with_name("connect"); - - printf_stdebug("%c", c); - switch (cur_esc) - { - case 0: - if (c == '\r') - cur_esc = c; - break; - case '\r': - if (c == '~') - cur_esc = c; - else - cur_esc = 0; - break; - case '~': - if (c == '.' || c == '\004') - return; - else - cur_esc = 0; - } - } - - if (FD_ISSET(st2000_desc, &readfds)) - { - while (1) - { - c = readchar(0); - if (c < 0) - break; - putchar(c); - } - fflush(stdout); - } - } -} -#endif /* 0 */ - -/* Define the target subroutine names */ - -struct target_ops st2000_ops = { - "st2000", - "Remote serial Tandem ST2000 target", - "Use a remote computer running STDEBUG connected by a serial line,\n\ -or a network connection.\n\ -Arguments are the name of the device for the serial line,\n\ -the speed to connect at in bits per second.", - st2000_open, - st2000_close, - 0, - st2000_detach, - st2000_resume, - st2000_wait, - st2000_fetch_register, - st2000_store_register, - st2000_prepare_to_store, - st2000_xfer_inferior_memory, - st2000_files_info, - st2000_insert_breakpoint, - st2000_remove_breakpoint, /* Breakpoints */ - 0, - 0, - 0, - 0, - 0, /* Terminal handling */ - st2000_kill, - 0, /* load */ - 0, /* lookup_symbol */ - st2000_create_inferior, - st2000_mourn_inferior, - 0, /* can_run */ - 0, /* notice_signals */ - process_stratum, - 0, /* next */ - 1, - 1, - 1, - 1, - 1, /* all mem, mem, stack, regs, exec */ - 0, - 0, /* Section pointers */ - OPS_MAGIC, /* Always the last thing */ -}; - -void -_initialize_remote_st2000 () -{ - add_target (&st2000_ops); - add_com ("st2000 ", class_obscure, st2000_command, - "Send a command to the STDBUG monitor."); - add_com ("connect", class_obscure, connect_command, - "Connect the terminal directly up to the STDBUG command monitor.\n\ -Use ~. or ~^D to break out."); -}