From: Martin Schwidefsky Date: Mon, 23 Feb 2009 10:10:25 +0000 (+0000) Subject: * doc/all.texi: Set S390. X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=11c19e16a25eadc2035bc7aafb4587774a1964bf;p=binutils-gdb.git * doc/all.texi: Set S390. * doc/as.texinfo: Add S390 support and pull in c-s390.texi. * doc/Makefile.am (CPU_DOCS): Add c-s390.texi. * doc/Makefile.in: Likewise. * doc/c-s390.texi: New. --- diff --git a/gas/ChangeLog b/gas/ChangeLog index bdaf430f9b3..b0b54b7c5b5 100644 --- a/gas/ChangeLog +++ b/gas/ChangeLog @@ -1,3 +1,11 @@ +2009-02-23 Martin Schwidefsky + + * doc/all.texi: Set S390. + * doc/as.texinfo: Add S390 support and pull in c-s390.texi. + * doc/Makefile.am (CPU_DOCS): Add c-s390.texi. + * doc/Makefile.in: Likewise. + * doc/c-s390.texi: New. + 2009-02-12 Nathan Sidwell * config/tc-m68k.c (mcf51qe_ctrl): Add CPUCR. diff --git a/gas/doc/Makefile.am b/gas/doc/Makefile.am index 4c6816b9ee1..793058d29a8 100644 --- a/gas/doc/Makefile.am +++ b/gas/doc/Makefile.am @@ -57,6 +57,7 @@ CPU_DOCS = \ c-pdp11.texi \ c-pj.texi \ c-ppc.texi \ + c-s390.texi \ c-sh.texi \ c-sh64.texi \ c-sparc.texi \ diff --git a/gas/doc/Makefile.in b/gas/doc/Makefile.in index b84aa1f7351..7e8b03b70fa 100644 --- a/gas/doc/Makefile.in +++ b/gas/doc/Makefile.in @@ -278,6 +278,7 @@ CPU_DOCS = \ c-pdp11.texi \ c-pj.texi \ c-ppc.texi \ + c-s390.texi \ c-sh.texi \ c-sh64.texi \ c-sparc.texi \ diff --git a/gas/doc/all.texi b/gas/doc/all.texi index 911b4eef49e..6ccc6f35df8 100644 --- a/gas/doc/all.texi +++ b/gas/doc/all.texi @@ -57,6 +57,7 @@ @set PDP11 @set PJ @set PPC +@set S390 @set SH @set SPARC @set TIC54X diff --git a/gas/doc/as.texinfo b/gas/doc/as.texinfo index 3e85968114d..18fd9622fbc 100644 --- a/gas/doc/as.texinfo +++ b/gas/doc/as.texinfo @@ -416,6 +416,13 @@ gcc(1), ld(1), and the Info entries for @file{binutils} and @file{ld}. [@b{-mlittle}|@b{-mlittle-endian}|@b{-mbig}|@b{-mbig-endian}] [@b{-msolaris}|@b{-mno-solaris}] @end ifset +@ifset S390 + +@emph{Target s390 options:} + [@b{-m31}|@b{-m64}] [@b{-mesa}|@b{-mzarch}] [@b{-march}=@var{CPU}] + [@b{-mregnames}|@b{-mno-regnames}] + [@b{-mwarn-areg-zero}] +@end ifset @ifset SPARC @emph{Target SPARC options:} @@ -1162,6 +1169,30 @@ Assemble for a little endian target. See the info pages for documentation of the MMIX-specific options. @end ifset +@ifset S390 +The following options are available when @value{AS} is configured for the s390 +processor family. + +@table @gcctabopt +@item -m31 +@itemx -m64 +Select the word size, either 31/32 bits or 64 bits. +@item -mesa +@item -mzarch +Select the architecture mode, either the Enterprise System +Architecture (esa) or the z/Architecture mode (zarch). +@item -march=@var{processor} +Specify which s390 processor variant is the target, @samp{g6}, @samp{g6}, +@samp{z900}, @samp{z990}, @samp{z9-109}, @samp{z9-ec}, or @samp{z10}. +@item -mregnames +@itemx -mno-regnames +Allow or disallow symbolic names for registers. +@item -mwarn-areg-zero +Warn whenever the operand for a base or index register has been specified +but evaluates to zero. +@end table +@end ifset + @ifset XTENSA The following options are available when @value{AS} is configured for an Xtensa processor. @@ -2202,6 +2233,9 @@ is considered a comment and is ignored. The line comment character is @ifset PPC @samp{#} for Motorola PowerPC; @end ifset +@ifset S390 +@samp{#} for IBM S/390; +@end ifset @ifset SH @samp{!} for the Renesas / SuperH SH; @end ifset @@ -6716,6 +6750,9 @@ subject, see the hardware manufacturer's manual. @ifset PPC * PPC-Dependent:: PowerPC Dependent Features @end ifset +@ifset S390 +* S/390-Dependent:: IBM S/390 Dependent Features +@end ifset @ifset SPARC * Sparc-Dependent:: SPARC Dependent Features @end ifset @@ -6884,6 +6921,10 @@ family. @include c-ppc.texi @end ifset +@ifset S390 +@include c-s390.texi +@end ifset + @ifset SH @include c-sh.texi @include c-sh64.texi diff --git a/gas/doc/c-s390.texi b/gas/doc/c-s390.texi new file mode 100644 index 00000000000..9408cb27c01 --- /dev/null +++ b/gas/doc/c-s390.texi @@ -0,0 +1,864 @@ +@c Copyright 2009 +@c Free Software Foundation, Inc. +@c This is part of the GAS manual. +@c For copying conditions, see the file as.texinfo. +@ifset GENERIC +@page +@node S/390-Dependent +@chapter IBM S/390 Dependent Features +@end ifset +@ifclear GENERIC +@node Machine Dependencies +@chapter IBM S/390 Dependent Features +@end ifclear + +@cindex s390 support + +The s390 version of @code{@value{AS}} supports two architectures modes +and seven chip levels. The architecture modes are the Enterprise System +Architecture (ESA) and the newer z/Architecture mode. The chip levels +are g5, g6, z900, z990, z9-109, z9-ec and z10. + +@menu +* s390 Options:: Command-line Options. +* s390 Characters:: Special Characters. +* s390 Syntax:: Assembler Instruction syntax. +* s390 Directives:: Assembler Directives. +* s390 Floating Point:: Floating Point. +@end menu + +@node s390 Options +@section Options +@cindex options for s390 +@cindex s390 options + +The following table lists all available s390 specific options: + +@table @code +@cindex @samp{-m31} option, s390 +@cindex @samp{-m64} option, s390 +@item -m31 | -m64 +Select 31- or 64-bit ABI implying a word size of 32- or 64-bit. + +These options are only available with the ELF object file format, and +require that the necessary BFD support has been included (on a 31-bit +platform you must add --enable-64-bit-bfd on the call to the configure +script to enable 64-bit usage and use s390x as target platform). + +@cindex @samp{-mesa} option, s390 +@cindex @samp{-mzarch} option, s390 +@item -mesa | -mzarch +Select the architecture mode, either the Enterprise System Architecture +(esa) mode or the z/Architecture mode (zarch). + +The 64-bit instructions are only available with the z/Architecture mode. +The combination of @samp{-m64} and @samp{-mesa} results in a warning +message. + +@cindex @samp{-march=} option, s390 +@item -march=@var{CPU} +This option specifies the target processor. The following processor names +are recognized: +@code{g5}, +@code{g6}, +@code{z900}, +@code{z990}, +@code{z9-109}, +@code{z9-ec} and +@code{z10}. +Assembling an instruction that is not supported on the target processor +results in an error message. Do not specify @code{g5} or @code{g6} +with @samp{-mzarch}. + +@cindex @samp{-mregnames} option, s390 +@item -mregnames +Allow symbolic names for registers. + +@cindex @samp{-mno-regnames} option, s390 +@item -mno-regnames +Do not allow symbolic names for registers. + +@cindex @samp{-mwarn-areg-zero} option, s390 +@item -mwarn-areg-zero +Warn whenever the operand for a base or index register has been specified +but evaluates to zero. This can indicate the misuse of general purpose +register 0 as an address register. + +@end table + +@node s390 Characters +@section Special Characters +@cindex line comment character, s390 +@cindex s390 line comment character + +@samp{#} is the line comment character. + +@node s390 Syntax +@section Instruction syntax +@cindex instruction syntax, s390 +@cindex s390 instruction syntax + +The assembler syntax closely follows the syntax outlined in +Enterprise Systems Architecture/390 Principles of Operation (SA22-7201) +and the z/Architecture Principles of Operation (SA22-7832). + +Each instruction has two major parts, the instruction mnemonic +and the instruction operands. The instruction format varies. + +@menu +* s390 Register:: Register Naming +* s390 Mnemonics:: Instruction Mnemonics +* s390 Operands:: Instruction Operands +* s390 Formats:: Instruction Formats +* s390 Aliases:: Instruction Aliases +* s390 Operand Modifier:: Instruction Operand Modifier +* s390 Instruction Marker:: Instruction Marker +* s390 Literal Pool Entries:: Literal Pool Entries +@end menu + +@node s390 Register +@subsection Register naming +@cindex register naming, s390 +@cindex s390 register naming + +The @code{@value{AS}} recognizes a number of predefined symbols for the +various processor registers. A register specification in one of the +instruction formats is an unsigned integer between 0 and 15. The specific +instruction and the position of the register in the instruction format +denotes the type of the register. The register symbols are prefixed with +@samp{%}: + +@display +@multitable {%rN} {the 16 general purpose registers, 0 <= N <= 15} +@item %rN @tab the 16 general purpose registers, 0 <= N <= 15 +@item %fN @tab the 16 floating point registers, 0 <= N <= 15 +@item %aN @tab the 16 access registers, 0 <= N <= 15 +@item %cN @tab the 16 control registers, 0 <= N <= 15 +@item %lit @tab an alias for the general purpose register %r13 +@item %sp @tab an alias for the general purpose register %r15 +@end multitable +@end display + +@node s390 Mnemonics +@subsection Instruction Mnemonics +@cindex instruction mnemonics, s390 +@cindex s390 instruction mnemonics + +All instructions documented in the Principles of Operation are supported +with the mnemonic and order of operands as described. +The instruction mnemonic identifies the instruction format +(@ref{s390 Formats}) and the specific operation code for the instruction. +For example, the @samp{lr} mnemonic denotes the instruction format @samp{RR} +with the operation code @samp{0x18}. + +The definition of the various mnemonics follows a scheme, where the first +character usually hint at the type of the instruction: + +@display +@multitable {sla, sll} {if r is the last character the instruction operates on registers} +@item a @tab add instruction, for example @samp{al} for add logical 32-bit +@item b @tab branch instruction, for example @samp{bc} for branch on condition +@item c @tab compare or convert instruction, for example @samp{cr} for compare +register 32-bit +@item d @tab divide instruction, for example @samp{dlr} devide logical register +64-bit to 32-bit +@item i @tab insert instruction, for example @samp{ic} insert character +@item l @tab load instruction, for example @samp{ltr} load and test register +@item mv @tab move instruction, for example @samp{mvc} move character +@item m @tab multiply instruction, for example @samp{mh} multiply halfword +@item n @tab and instruction, for example @samp{ni} and immediate +@item o @tab or instruction, for example @samp{oc} or character +@item sla, sll @tab shift left single instruction +@item sra, srl @tab shift right single instruction +@item st @tab store instruction, for example @samp{stm} store multiple +@item s @tab subtract instruction, for example @samp{slr} subtract +logical 32-bit +@item t @tab test or translate instruction, of example @samp{tm} test under mask +@item x @tab exclusive or instruction, for example @samp{xc} exclusive or +character +@end multitable +@end display + +Certain characters at the end of the mnemonic may describe a property +of the instruction: + +@display +@multitable {c} {if r is the last character the instruction operates on registers} +@item c @tab the instruction uses a 8-bit character operand +@item f @tab the instruction extends a 32-bit operand to 64 bit +@item g @tab the operands are treated as 64-bit values +@item h @tab the operand uses a 16-bit halfword operand +@item i @tab the instruction uses an immediate operand +@item l @tab the instruction uses unsigned, logical operands +@item m @tab the instruction uses a mask or operates on multiple values +@item r @tab if r is the last character, the instruction operates on registers +@item y @tab the instruction uses 20-bit displacements +@end multitable +@end display + +There are many exceptions to the scheme outlined in the above lists, in +particular for the priviledged instructions. For non-priviledged +instruction it works quite well, for example the instruction @samp{clgfr} +c: compare instruction, l: unsigned operands, g: 64-bit operands, +f: 32- to 64-bit extension, r: register operands. The instruction compares +an 64-bit value in a register with the zero extended 32-bit value from +a second register. +For a complete list of all mnemonics see appendix B in the Principles +of Operation. + +@node s390 Operands +@subsection Instruction Operands +@cindex instruction operands, s390 +@cindex s390 instruction operands + +Instruction operands can be grouped into three classes, operands located +in registers, immediate operands, and operands in storage. + +A register operand can be located in general, floating-point, access, +or control register. The register is identified by a four-bit field. +The field containing the register operand is called the R field. + +Immediate operands are contained within the instruction and can have +8, 16 or 32 bits. The field containing the immediate operand is called +the I field. Dependent on the instruction the I field is either signed +or unsigned. + +A storage operand consists of an address and a length. The address of a +storage operands can be specified in any of these ways: + +@itemize +@item The content of a single general R +@item The sum of the content of a general register called the base +register B plus the content of a displacement field D +@item The sum of the contents of two general registers called the +index register X and the base register B plus the content of a +displacement field +@item The sum of the current instruction address and a 32-bit signed +immediate field multiplied by two. +@end itemize + +The length of a storage operand can be: + +@itemize +@item Implied by the instruction +@item Specified by a bitmask +@item Specified by a four-bit or eight-bit length field L +@item Specified by the content of a general register +@end itemize + +The notation for storage operand addresses formed from multiple fields is +as follows: + +@table @code +@item Dn(Bn) +the address for operand number n is formed from the content of general +register Bn called the base register and the displacement field Dn. +@item Dn(Xn,Bn) +the address for operand number n is formed from the content of general +register Xn called the index register, general register Bn called the +base register and the displacement field Dn. +@item Dn(Ln,Bn) +the address for operand number n is formed from the content of general +regiser Bn called the base register and the displacement field Dn. +The length of the operand n is specified by the field Ln. +@end table + +The base registers Bn and the index registers Xn of a storage operand can +be skipped. If Bn and Xn are skipped, a zero will be stored to the operand +field. The notation changes as follows: + +@display +@multitable @columnfractions 0.30 0.30 +@headitem full notation @tab short notation +@item Dn(0,Bn) @tab Dn(Bn) +@item Dn(0,0) @tab Dn +@item Dn(0) @tab Dn +@item Dn(Ln,0) @tab Dn(Ln) +@end multitable +@end display + + +@node s390 Formats +@subsection Instruction Formats +@cindex instruction formats, s390 +@cindex s390 instruction formats + +The Principles of Operation manuals lists 26 instruction formats where +some of the formats have multiple variants. For the @samp{.insn} +pseudo directive the assembler recognizes some of the formats. +Typically, the most general variant of the instruction format is used +by the @samp{.insn} directive. + +The following table lists the abbreviations used in the table of +instruction formats: + +@display +@multitable {OpCode / OpCd} {Displacement lower 12 bits for operand x.} +@item OpCode / OpCd @tab Part of the op code. +@item Bx @tab Base register number for operand x. +@item Dx @tab Displacement for operand x. +@item DLx @tab Displacement lower 12 bits for operand x. +@item DHx @tab Displacement higher 8-bits for operand x. +@item Rx @tab Register number for operand x. +@item Xx @tab Index register number for operand x. +@item Ix @tab Signed immediate for operand x. +@item Ux @tab Unsigned immediate for operand x. +@end multitable +@end display + +An instruction is two, four, or six bytes in length and must be aligned +on a 2 byte boundary. The first two bits of the instruction specify the +length of the instruction, 00 indicates a two byte instruction, 01 and 10 +indicates a four byte instruction, and 11 indicates a six byte instruction. + +The following table lists the s390 instruction formats that are available +with the @samp{.insn} pseudo directive: + +@table @code +@item E format +@verbatim ++-------------+ +| OpCode | ++-------------+ +0 15 +@end verbatim + +@item RI format: R1,I2 +@verbatim ++--------+----+----+------------------+ +| OpCode | R1 |OpCd| I2 | ++--------+----+----+------------------+ +0 8 12 16 31 +@end verbatim + +@item RIE format: R1,R3,I2 +@verbatim ++--------+----+----+------------------+--------+--------+ +| OpCode | R1 | R3 | I2 |////////| OpCode | ++--------+----+----+------------------+--------+--------+ +0 8 12 16 32 40 47 +@end verbatim + +@item RIL format: R1,I2 +@verbatim ++--------+----+----+------------------------------------+ +| OpCode | R1 |OpCd| I2 | ++--------+----+----+------------------------------------+ +0 8 12 16 47 +@end verbatim + +@item RILU format: R1,U2 +@verbatim ++--------+----+----+------------------------------------+ +| OpCode | R1 |OpCd| U2 | ++--------+----+----+------------------------------------+ +0 8 12 16 47 +@end verbatim + +@item RIS format: R1,I2,M3,D4(B4) +@verbatim ++--------+----+----+----+-------------+--------+--------+ +| OpCode | R1 | M3 | B4 | D4 | I2 | Opcode | ++--------+----+----+----+-------------+--------+--------+ +0 8 12 16 20 32 36 47 +@end verbatim + +@item RR format: R1,R2 +@verbatim ++--------+----+----+ +| OpCode | R1 | R2 | ++--------+----+----+ +0 8 12 15 +@end verbatim + +@item RRE format: R1,R2 +@verbatim ++------------------+--------+----+----+ +| OpCode |////////| R1 | R2 | ++------------------+--------+----+----+ +0 16 24 28 31 +@end verbatim + +@item RRF format: R1,R2,R3,M4 +@verbatim ++------------------+----+----+----+----+ +| OpCode | R3 | M4 | R1 | R2 | ++------------------+----+----+----+----+ +0 16 20 24 28 31 +@end verbatim + +@item RRS format: R1,R2,M3,D4(B4) +@verbatim ++--------+----+----+----+-------------+----+----+--------+ +| OpCode | R1 | R3 | B4 | D4 | M3 |////| OpCode | ++--------+----+----+----+-------------+----+----+--------+ +0 8 12 16 20 32 36 40 47 +@end verbatim + +@item RS format: R1,R3,D2(B2) +@verbatim ++--------+----+----+----+-------------+ +| OpCode | R1 | R3 | B2 | D2 | ++--------+----+----+----+-------------+ +0 8 12 16 20 31 +@end verbatim + +@item RSE format: R1,R3,D2(B2) +@verbatim ++--------+----+----+----+-------------+--------+--------+ +| OpCode | R1 | R3 | B2 | D2 |////////| OpCode | ++--------+----+----+----+-------------+--------+--------+ +0 8 12 16 20 32 40 47 +@end verbatim + +@item RSI format: R1,R3,I2 +@verbatim ++--------+----+----+------------------------------------+ +| OpCode | R1 | R3 | I2 | ++--------+----+----+------------------------------------+ +0 8 12 16 47 +@end verbatim + +@item RSY format: R1,R3,D2(B2) +@verbatim ++--------+----+----+----+-------------+--------+--------+ +| OpCode | R1 | R3 | B2 | DL2 | DH2 | OpCode | ++--------+----+----+----+-------------+--------+--------+ +0 8 12 16 20 32 40 47 +@end verbatim + +@item RX format: R1,D2(X2,B2) +@verbatim ++--------+----+----+----+-------------+ +| OpCode | R1 | X2 | B2 | D2 | ++--------+----+----+----+-------------+ +0 8 12 16 20 31 +@end verbatim + +@item RXE format: R1,D2(X2,B2) +@verbatim ++--------+----+----+----+-------------+--------+--------+ +| OpCode | R1 | X2 | B2 | D2 |////////| OpCode | ++--------+----+----+----+-------------+--------+--------+ +0 8 12 16 20 32 40 47 +@end verbatim + +@item RXF format: R1,R3,D2(X2,B2) +@verbatim ++--------+----+----+----+-------------+----+---+--------+ +| OpCode | R3 | X2 | B2 | D2 | R1 |///| OpCode | ++--------+----+----+----+-------------+----+---+--------+ +0 8 12 16 20 32 36 40 47 +@end verbatim + +@item RXY format: R1,D2(X2,B2) +@verbatim ++--------+----+----+----+-------------+--------+--------+ +| OpCode | R1 | X2 | B2 | DL2 | DH2 | OpCode | ++--------+----+----+----+-------------+--------+--------+ +0 8 12 16 20 32 36 40 47 +@end verbatim + +@item S format: D2(B2) +@verbatim ++------------------+----+-------------+ +| OpCode | B2 | D2 | ++------------------+----+-------------+ +0 16 20 31 +@end verbatim + +@item SI format: D1(B1),I2 +@verbatim ++--------+---------+----+-------------+ +| OpCode | I2 | B1 | D1 | ++--------+---------+----+-------------+ +0 8 16 20 31 +@end verbatim + +@item SIY format: D1(B1),U2 +@verbatim ++--------+---------+----+-------------+--------+--------+ +| OpCode | I2 | B1 | DL1 | DH1 | OpCode | ++--------+---------+----+-------------+--------+--------+ +0 8 16 20 32 36 40 47 +@end verbatim + +@item SIL format: D1(B1),I2 +@verbatim ++------------------+----+-------------+-----------------+ +| OpCode | B1 | D1 | I2 | ++------------------+----+-------------+-----------------+ +0 16 20 32 47 +@end verbatim + +@item SS format: D1(R1,B1),D2(B3),R3 +@verbatim ++--------+----+----+----+-------------+----+------------+ +| OpCode | R1 | R3 | B1 | D1 | B2 | D2 | ++--------+----+----+----+-------------+----+------------+ +0 8 12 16 20 32 36 47 +@end verbatim + +@item SSE format: D1(B1),D2(B2) +@verbatim ++------------------+----+-------------+----+------------+ +| OpCode | B1 | D1 | B2 | D2 | ++------------------+----+-------------+----+------------+ +0 8 12 16 20 32 36 47 +@end verbatim + +@item SSF format: D1(B1),D2(B2),R3 +@verbatim ++--------+----+----+----+-------------+----+------------+ +| OpCode | R3 |OpCd| B1 | D1 | B2 | D2 | ++--------+----+----+----+-------------+----+------------+ +0 8 12 16 20 32 36 47 +@end verbatim + +@end table + +For the complete list of all instruction format variants see the +Principles of Operation manuals. + +@node s390 Aliases +@subsection Instruction Aliases +@cindex instruction aliases, s390 +@cindex s390 instruction aliases + +A specific bit pattern can have multiple mnemonics, for example +the bit pattern @samp{0xa7000000} has the mnemonics @samp{tmh} and +@samp{tmlh}. In addition, there are a number of mnemonics recognized by +@code{@value{AS}} that are not present in the Principles of Operation. +These are the short forms of the branch instructions, where the condition +code mask operand is encoded in the mnemonic. This is relevant for the +branch instructions, the compare and branch instructions, and the +compare and trap instructions. + +For the branch instructions there are 20 condition code strings that can +be used as part of the mnemonic in place of a mask operand in the instruction +format: + +@display +@multitable @columnfractions .30 .30 +@headitem instruction @tab short form +@item bcr M1,R2 @tab br R2 +@item bc M1,D2(X2,B2) @tab b D2(X2,B2) +@item brc M1,I2 @tab j I2 +@item brcl M1,I2 @tab jg I2 +@end multitable +@end display + +In the mnemonic for a branch instruction the condition code string +can be any of the following: + +@display +@multitable {nle} {jump on not zero / if not zeros} +@item o @tab jump on overflow / if ones +@item h @tab jump on A high +@item p @tab jump on plus +@item nle @tab jump on not low or equal +@item l @tab jump on A low +@item m @tab jump on minus +@item nhe @tab jump on not high or equal +@item lh @tab jump on low or high +@item ne @tab jump on A not equal B +@item nz @tab jump on not zero / if not zeros +@item e @tab jump on A equal B +@item z @tab jump on zero / if zeroes +@item nlh @tab jump on not low or high +@item he @tab jump on high or equal +@item nl @tab jump on A not low +@item nm @tab jump on not minus / if not mixed +@item le @tab jump on low or equal +@item nh @tab jump on A not high +@item np @tab jump on not plus +@item no @tab jump on not overflow / if not ones +@end multitable +@end display + +For the compare and branch, and compare and trap instructions there +are 12 condition code strings that can be used as part of the mnemonic in +place of a mask operand in the instruction format: + +@display +@multitable @columnfractions .40 .40 +@headitem instruction @tab short form +@item crb R1,R2,M3,D4(B4) @tab crb R1,R2,D4(B4) +@item cgrb R1,R2,M3,D4(B4) @tab cgrb R1,R2,D4(B4) +@item crj R1,R2,M3,I4 @tab crj R1,R2,I4 +@item cgrj R1,R2,M3,I4 @tab cgrj R1,R2,I4 +@item cib R1,I2,M3,D4(B4) @tab cib R1,I2,D4(B4) +@item cgib R1,I2,M3,D4(B4) @tab cgib R1,I2,D4(B4) +@item cij R1,I2,M3,I4 @tab cij R1,I2,I4 +@item cgij R1,I2,M3,I4 @tab cgij R1,I2,I4 +@item crt R1,R2,M3 @tab crt R1,R2 +@item cgrt R1,R2,M3 @tab cgrt R1,R2 +@item cit R1,I2,M3 @tab cit R1,I2 +@item cgit R1,I2,M3 @tab cgit R1,I2 +@item clrb R1,R2,M3,D4(B4) @tab clrb R1,R2,D4(B4) +@item clgrb R1,R2,M3,D4(B4) @tab clgrb R1,R2,D4(B4) +@item clrj R1,R2,M3,I4 @tab clrj R1,R2,I4 +@item clgrj R1,R2,M3,I4 @tab clgrj R1,R2,I4 +@item clib R1,I2,M3,D4(B4) @tab clib R1,I2,D4(B4) +@item clgib R1,I2,M3,D4(B4) @tab clgib R1,I2,D4(B4) +@item clij R1,I2,M3,I4 @tab clij R1,I2,I4 +@item clgij R1,I2,M3,I4 @tab clgij R1,I2,I4 +@item clrt R1,R2,M3 @tab clrt R1,R2 +@item clgrt R1,R2,M3 @tab clgrt R1,R2 +@item clfit R1,I2,M3 @tab clfit R1,I2 +@item clgit R1,I2,M3 @tab clgit R1,I2 +@end multitable +@end display + +In the mnemonic for a compare and branch and compare and trap instruction +the condition code string can be any of the following: + +@display +@multitable {nle} {jump on not zero / if not zeros} +@item h @tab jump on A high +@item nle @tab jump on not low or equal +@item l @tab jump on A low +@item nhe @tab jump on not high or equal +@item ne @tab jump on A not equal B +@item lh @tab jump on low or high +@item e @tab jump on A equal B +@item nlh @tab jump on not low or high +@item nl @tab jump on A not low +@item he @tab jump on high or equal +@item nh @tab jump on A not high +@item le @tab jump on low or equal +@end multitable +@end display + +@node s390 Operand Modifier +@subsection Instruction Operand Modifier +@cindex instruction operand modifier, s390 +@cindex s390 instruction operand modifier + +If a symbol modifier is attached to a symbol in an expression for an +instruction operand field, the symbol term is replaced with a reference +to an object in the global offset table (GOT) or the procedure linkage +table (PLT). The following expressions are allowed: +@samp{symbol@@modifier + constant}, +@samp{symbol@@modifier + label + constant}, and +@samp{symbol@@modifier - label + constant}. +The term @samp{symbol} is the symbol that will be entered into the GOT or +PLT, @samp{label} is a local label, and @samp{constant} is an arbitrary +expression that the assembler can evaluate to a constant value. + +The term @samp{(symbol + constant1)@@modifier +/- label + constant2} +is also accepted but a warning message is printed and the term is +converted to @samp{symbol@@modifier +/- label + constant1 + constant2}. + +@table @code +@item @@got +@itemx @@got12 +The @@got modifier can be used for displacement fields, 16-bit immediate +fields and 32-bit pc-relative immediate fields. The @@got12 modifier is +synonym to @@got. The symbol is added to the GOT. For displacement +fields and 16-bit immediate fields the symbol term is replaced with +the offset from the start of the GOT to the GOT slot for the symbol. +For a 32-bit pc-relative field the pc-relative offset to the GOT +slot from the current instruction address is used. +@item @@gotent +The @@gotent modifier can be used for 32-bit pc-relative immediate fields. +The symbol is added to the GOT and the symbol term is replaced with +the pc-relative offset from the current instruction to the GOT slot for the +symbol. +@item @@gotoff +The @@gotoff modifier can be used for 16-bit immediate fields. The symbol +term is replaced with the offset from the start of the GOT to the +address of the symbol. +@item @@gotplt +The @@gotplt modifier can be used for displacement fields, 16-bit immediate +fields, and 32-bit pc-relative immediate fields. A procedure linkage +table entry is generated for the symbol and a jump slot for the symbol +is added to the GOT. For displacement fields and 16-bit immediate +fields the symbol term is replaced with the offset from the start of the +GOT to the jump slot for the symbol. For a 32-bit pc-relative field +the pc-relative offset to the jump slot from the current instruction +address is used. +@item @@plt +The @@plt modifier can be used for 16-bit and 32-bit pc-relative immediate +fields. A procedure linkage table entry is generated for the symbol. +The symbol term is replaced with the relative offset from the current +instruction to the PLT entry for the symbol. +@item @@pltoff +The @@pltoff modifier can be used for 16-bit immediate fields. The symbol +term is replaced with the offset from the start of the PLT to the address +of the symbol. +@item @@gotntpoff +The @@gotntpoff modifier can be used for displacement fields. The symbol +is added to the static TLS block and the negated offset to the symbol +in the static TLS block is added to the GOT. The symbol term is replaced +with the offset to the GOT slot from the start of the GOT. +@item @@indntpoff +The @@indntpoff modifier can be used for 32-bit pc-relative immediate +fields. The symbol is added to the static TLS block and the negated offset +to the symbol in the static TLS block is added to the GOT. The symbol term +is replaced with the pc-relative offset to the GOT slot from the current +instruction address. +@end table + +For more information about the thread local storage modifiers +@samp{gotntpoff} and @samp{indntpoff} see the ELF extension documentation +@samp{ELF Handling For Thread-Local Storage}. + +@node s390 Instruction Marker +@subsection Instruction Marker +@cindex instruction marker, s390 +@cindex s390 instruction marker + +The thread local storage instruction markers are used by the linker to +perform code optimization. + +@table @code +@item :tls_load +The :tls_load marker is used to flag the load instruction in the initial +exec TLS model that retrieves the offset from the thread pointer to a +thread local storage variable from the GOT. +@item :tls_gdcall +The :tls_gdcall marker is used to flag the branch-and-save instruction to +the __tls_get_offset function in the global dynamic TLS model. +@item :tls_ldcall +The :tls_ldcall marker is used to flag the branch-and-save instruction to +the __tls_get_offset function in the local dynamic TLS model. +@end table + +For more information about the thread local storage instruction marker +and the linker optimizations see the ELF extension documentation +@samp{ELF Handling For Thread-Local Storage}. + +@node s390 Literal Pool Entries +@subsection Literal Pool Entries +@cindex literal pool entries, s390 +@cindex s390 literal pool entries + +A literal pool is a collection of values. To access the values a pointer +to the literal pool is loaded to a register, the literal pool register. +Usually, register %r13 is used as the literal pool register +(@ref{s390 Register}). Literal pool entries are created by adding the +suffix :lit1, :lit2, :lit4, or :lit8 to the end of an expression for an +instruction operand. The expression is added to the literal pool and the +operand is replaced with the offset to the literal in the literal pool. + +@table @code +@item :lit1 +The literal pool entry is created as an 8-bit value. An operand modifier +must not be used for the original expression. +@item :lit2 +The literal pool entry is created as a 16 bit value. The operand modifier +@@got may be used in the original expression. The term @samp{x@@got:lit2} +will put the got offset for the global symbol x to the literal pool as +16 bit value. +@item :lit4 +The literal pool entry is created as a 32-bit value. The operand modifier +@@got and @@plt may be used in the original expression. The term +@samp{x@@got:lit4} will put the got offset for the global symbol x to the +literal pool as a 32-bit value. The term @samp{x@@plt:lit4} will put the +plt offset for the global symbol x to the literal pool as a 32-bit value. +@item :lit8 +The literal pool entry is created as a 64-bit value. The operand modifier +@@got and @@plt may be used in the original expression. The term +@samp{x@@got:lit8} will put the got offset for the global symbol x to the +literal pool as a 64-bit value. The term @samp{x@@plt:lit8} will put the +plt offset for the global symbol x to the literal pool as a 64-bit value. +@end table + +The assembler directive @samp{.ltorg} is used to emit all literal pool +entries to the current position. + +@node s390 Directives +@section Assembler Directives + +@code{@value{AS}} for s390 supports all of the standard ELF +assembler directives as outlined in the main part of this document. +Some directives have been extended and there are some additional +directives, which are only available for the s390 @code{@value{AS}}. + +@table @code +@cindex @code{.insn} directive, s390 +@item .insn +This directive permits the numeric representation of an instructions +and makes the assembler insert the operands according to one of the +instructions formats for @samp{.insn} (@ref{s390 Formats}). +For example, the instruction @samp{l %r1,24(%r15)} could be written as +@samp{.insn rx,0x58000000,%r1,24(%r15)}. +@cindex @code{.short} directive, s390 +@cindex @code{.long} directive, s390 +@cindex @code{.quad} directive, s390 +@item .short +@itemx .long +@itemx .quad +This directive places one or more 16-bit (.short), 32-bit (.long), or +64-bit (.quad) values into the current section. If an ELF or TLS modifier +is used only the following expressions are allowed: +@samp{symbol@@modifier + constant}, +@samp{symbol@@modifier + label + constant}, and +@samp{symbol@@modifier - label + constant}. +The following modifiers are available: +@table @code +@item @@got +@itemx @@got12 +The @@got modifier can be used for .short, .long and .quad. The @@got12 +modifier is synonym to @@got. The symbol is added to the GOT. The symbol +term is replaced with offset from the start of the GOT to the GOT slot for +the symbol. +@item @@gotoff +The @@gotoff modifier can be used for .short, .long and .quad. The symbol +term is replaced with the offset from the start of the GOT to the address +of the symbol. +@item @@gotplt +The @@gotplt modifier can be used for .long and .quad. A procedure linkage +table entry is generated for the symbol and a jump slot for the symbol +is added to the GOT. The symbol term is replaced with the offset from the +start of the GOT to the jump slot for the symbol. +@item @@plt +The @@plt modifier can be used for .long and .quad. A procedure linkage +table entry us generated for the symbol. The symbol term is replaced with +the address of the PLT entry for the symbol. +@item @@pltoff +The @@pltoff modifier can be used for .short, .long and .quad. The symbol +term is replaced with the offset from the start of the PLT to the address +of the symbol. +@item @@tlsgd +@itemx @@tlsldm +The @@tlsgd and @@tlsldm modifier can be used for .long and .quad. A +tls_index structure for the symbol is added to the GOT. The symbol term is +replaced with the offset from the start of the GOT to the tls_index structure. +@item @@gotntpoff +@itemx @@indntpoff +The @@gotntpoff and @@indntpoff modifier can be used for .long and .quad. +The symbol is added to the static TLS block and the negated offset to the +symbol in the static TLS block is added to the GOT. For @@gotntpoff the +symbol term is replaced with the offset from the start of the GOT to the +GOT slot, for @@indntpoff the symbol term is replaced with the address +of the GOT slot. +@item @@dtpoff +The @@dtpoff modifier can be used for .long and .quad. The symbol term +is replaced with the offset of the symbol relative to the start of the +TLS block it is contained in. +@item @@ntpoff +The @@ntpoff modifier can be used for .long and .quad. The symbol term +is replaced with the offset of the symbol relative to the TCB pointer. +@end table + +For more information about the thread local storage modifiers see the +ELF extension documentation @samp{ELF Handling For Thread-Local Storage}. + +@cindex @code{.ltorg} directive, s390 +@item .ltorg +This directive causes the current contents of the literal pool to be +dumped to the current location (@ref{s390 Literal Pool Entries}). +@end table + +@node s390 Floating Point +@section Floating Point +@cindex floating point, s390 +@cindex s390 floating point + +The assembler recognizes both the @sc{ieee} floating-point instruction and +the hexadecimal floating-point instructions. The floating-point constructors +@samp{.float}, @samp{.single}, and @samp{.double} always emit the +@sc{ieee} format. To assemble hexadecimal floating-point constants the +@samp{.long} and @samp{.quad} directives must be used.