From: Nikolay Dimitrov Date: Sat, 8 Sep 2018 00:24:52 +0000 (+0300) Subject: board: resurrect support for RIoTboard X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=11f869a0664871bb65abae86b8a0a2973a8f1b4b;p=buildroot.git board: resurrect support for RIoTboard Resurrect support for RIoTboard after 2018.02.x deprecation. Signed-off-by: Nikolay Dimitrov Signed-off-by: Thomas Petazzoni --- diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml index d4807c5c85..d3d544b020 100644 --- a/.gitlab-ci.yml +++ b/.gitlab-ci.yml @@ -230,6 +230,7 @@ raspberrypi3_64_defconfig: *defconfig raspberrypi3_defconfig: *defconfig raspberrypi3_qt5we_defconfig: *defconfig raspberrypi_defconfig: *defconfig +riotboard_defconfig: *defconfig roseapplepi_defconfig: *defconfig s6lx9_microboard_defconfig: *defconfig sheevaplug_defconfig: *defconfig diff --git a/DEVELOPERS b/DEVELOPERS index 5b4127b8a8..b05564dd44 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -1512,6 +1512,10 @@ F: package/exiv2/ F: package/nvidia-tegra23/nvidia-tegra23-binaries/ F: package/nvidia-tegra23/nvidia-tegra23-codecs/ +N: Nikolay Dimitrov +F: board/embest/riotboard/ +F: configs/riotboard_defconfig + N: Nimai Mahajan F: package/libucl/ diff --git a/board/embest/riotboard/genimage.cfg b/board/embest/riotboard/genimage.cfg new file mode 100644 index 0000000000..1221c83b9a --- /dev/null +++ b/board/embest/riotboard/genimage.cfg @@ -0,0 +1,17 @@ +image sdcard.img { + hdimage { + } + + partition u-boot { + in-partition-table = "no" + image = "u-boot.imx" + offset = 1024 + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext2" + offset = 1M + size = 60M + } +} diff --git a/board/embest/riotboard/readme.txt b/board/embest/riotboard/readme.txt new file mode 100644 index 0000000000..4ba836fa5a --- /dev/null +++ b/board/embest/riotboard/readme.txt @@ -0,0 +1,38 @@ +Buildroot for Embest RIoTboard +============================== + +This is a small development board, based on Freescale IMX6 Solo SoC +(single core ARM Cortex-A9). + +More details about the board can be found at: + + http://www.embest-tech.com/riotboard + +1. Compiling buildroot +---------------------- + +$ make riotboard_defconfig +$ make + +2. Installing buildroot +----------------------- + +Prepare an SD-card and plug it into your card reader. Always double +check the block device before writing to it, as writing to the wrong +block device can cause irrecoverable data loss. Now you can write the +image to your SD-card: + +sudo dd if=output/images/sdcard.img of=/dev/ bs=1M + +3. Running buildroot +-------------------- + +Position the board so you can read the label "RIoTboard" on the right +side of SW1 DIP switches. Configure the SW1 swiches like this: + +1 0 1 0 0 1 0 1 +ON OFF ON OFF OFF ON OFF ON + +Now plug your prepared SD-card in slot J6. Connect a serial console +(115200, 8, N, 1) to header J18. Connect a 5V/1A power supply to the +board and enjoy. diff --git a/board/embest/riotboard/rootfs_overlay/boot/extlinux/extlinux.conf b/board/embest/riotboard/rootfs_overlay/boot/extlinux/extlinux.conf new file mode 100644 index 0000000000..23e48a0da7 --- /dev/null +++ b/board/embest/riotboard/rootfs_overlay/boot/extlinux/extlinux.conf @@ -0,0 +1,6 @@ +default buildroot + +label buildroot +kernel /boot/zImage +devicetree /boot/imx6dl-riotboard.dtb +append console=ttymxc1,115200 root=/dev/mmcblk1p1 rw diff --git a/configs/riotboard_defconfig b/configs/riotboard_defconfig new file mode 100644 index 0000000000..6a37e64f8c --- /dev/null +++ b/configs/riotboard_defconfig @@ -0,0 +1,41 @@ +# architecture +BR2_arm=y +BR2_cortex_a9=y +BR2_ARM_ENABLE_NEON=y +BR2_ARM_ENABLE_VFP=y +BR2_ARM_FPU_VFPV3=y + +# system +BR2_TARGET_GENERIC_GETTY=y +BR2_TARGET_GENERIC_GETTY_PORT="ttymxc1" + +# bootloader +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_CUSTOM_VERSION=y +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2018.07" +BR2_TARGET_UBOOT_BOARDNAME="riotboard" +BR2_TARGET_UBOOT_FORMAT_IMX=y + +# Linux headers same as kernel, a 4.18 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_18=y + +# kernel +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.18" +BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6dl-riotboard" +BR2_LINUX_KERNEL_INSTALL_TARGET=y + +# required tools to create the SD card image +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y + +# rootfs +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_ROOTFS_OVERLAY="board/embest/riotboard/rootfs_overlay" +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/embest/riotboard/genimage.cfg"