From: Arnout Vandecappelle Date: Sat, 15 Oct 2016 14:50:56 +0000 (+0200) Subject: configs/freescale_mpc8315erdb: remove U-Boot build X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=12c01e4a05c8e4f4e0c4e8b74fac7824efdc8b41;p=buildroot.git configs/freescale_mpc8315erdb: remove U-Boot build Binutils was locked down to 2.24 because U-Boot 2014.01 didn't build with more recent binutils. However, this doesn't work anymore because binutils 2.24 is deprecated. Current U-Boot 2016.09.01 doesn't work out of the box because the u-boot-nand.img support has been removed. Since updating U-Boot is generally not needed anyway, we just remove the U-Boot support. Signed-off-by: Arnout Vandecappelle (Essensium/Mind) Cc: Gustavo Zacarias Signed-off-by: Peter Korsgaard --- diff --git a/board/freescale/mpc8315erdb/readme.txt b/board/freescale/mpc8315erdb/readme.txt index 446bd397cb..b4c87b4d4a 100644 --- a/board/freescale/mpc8315erdb/readme.txt +++ b/board/freescale/mpc8315erdb/readme.txt @@ -1,14 +1,3 @@ - -******************** WARNING ******************** -The compiled U-Boot binary is intended for NAND flash only! -It won't work for NOR and will brick that bootloader! - -Also don't go playing around with different U-boot versions or flash targets -unless you've got the necessary hardware and/or know-how to unbrick your kit. - -2014.04 is known good for NAND. -******************** WARNING ******************** - You'll need to program the files created by buildroot into the flash. The fast way is to tftp transfer the files via one of the network interfaces. @@ -17,36 +6,25 @@ file transfer from your terminal program by using a "loady" command from the u-boot prompt instead of the "tftp ..." commands stated below. Beware that serial console file transfers are quite slow! -Remember to set the MPC8315ERDB switches to NAND boot if you want to use -your newly built U-Boot. - -1. Program the new U-Boot binary to NAND flash (optional) - If you don't feel confident upgrading your bootloader then don't do it, - it's unnecessary most of the time. - - => tftp $loadaddr u-boot-nand.bin - => nand erase 0 0x80000 - => nand write $loadaddr 0 0x80000 $filesize - -2. Program the kernel to NAND flash +1. Program the kernel to NAND flash => tftp $loadaddr uImage => nand erase 0x100000 0x1e0000 => nand write $loadaddr 0x100000 0x1e0000 -3. Program the DTB to NAND flash +2. Program the DTB to NAND flash => tftp $loadaddr mpc8315erdb.dtb => nand erase 0x2e0000 0x20000 => nand write $loadaddr 0x2e0000 0x20000 -4. Program the root filesystem to NAND flash +3. Program the root filesystem to NAND flash => tftp $loadaddr rootfs.jffs2 => nand erase 0x400000 0x1c00000 => nand write $loadaddr 0x400000 $filesize -5. Booting your new system +4. Booting your new system => setenv nandboot 'setenv bootargs root=/dev/mtdblock3 rootfstype=jffs2 console=$consoledev,$baudrate;nand read $fdtaddr 0x2e0000 0x20000;nand read $loadaddr 0x100000 0x1e0000;bootm $loadaddr - $fdtaddr' diff --git a/configs/freescale_mpc8315erdb_defconfig b/configs/freescale_mpc8315erdb_defconfig index 628aaade1b..de7e561352 100644 --- a/configs/freescale_mpc8315erdb_defconfig +++ b/configs/freescale_mpc8315erdb_defconfig @@ -26,12 +26,3 @@ BR2_LINUX_KERNEL_INTREE_DTS_NAME="mpc8315erdb" # Serial port config BR2_TARGET_GENERIC_GETTY=y BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" - -# Bootloader -# Lock down binutils to <2.25 to avoid U-Boot build failure -BR2_BINUTILS_VERSION_2_24_X=y -BR2_TARGET_UBOOT=y -BR2_TARGET_UBOOT_BOARDNAME="MPC8315ERDB_NAND" -BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2014.04" -BR2_TARGET_UBOOT_FORMAT_NAND_BIN=y