From: Jan Beulich Date: Fri, 25 Aug 2023 12:56:07 +0000 (+0200) Subject: gas/ELF: widen use of $dump_opts in testsuite X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=183440b0aa1cd752c324a2f4c16a620bd938d9ad;p=binutils-gdb.git gas/ELF: widen use of $dump_opts in testsuite Rather than special-casing rx-*-* for section30, force use of conventional section names uniformly. By further passing $dump_opts to a few more tests, a number of xfail-s (and one notarget) can be eliminated (some of which had wrong justifications in associated comments anyway). Note that section7 and section15 need to be left alone: The harness fiddling with section names there didn't help before and is getting in the way now. For section12b, section16b, and most of the Dwarf tests nothing changes. Interestingly by passing $dump_opts the need to xfail section11 for LoongArch and RISC-V also goes away. --- diff --git a/gas/testsuite/gas/elf/bignums.d b/gas/testsuite/gas/elf/bignums.d index 3c05470f708..b06b59d11c6 100644 --- a/gas/testsuite/gas/elf/bignums.d +++ b/gas/testsuite/gas/elf/bignums.d @@ -1,8 +1,6 @@ #readelf: -x .data #name: bignum byte values -#xfail: rx-* -# The RX target sometimes calls its data section D_1. -# + # Test that 8-bit and 16-bit constants can be specified via bignums. # # Note - we should really apply this test to all targets, not just diff --git a/gas/testsuite/gas/elf/dwarf2-5.d b/gas/testsuite/gas/elf/dwarf2-5.d index 886f1a13389..1dd65732c50 100644 --- a/gas/testsuite/gas/elf/dwarf2-5.d +++ b/gas/testsuite/gas/elf/dwarf2-5.d @@ -1,11 +1,11 @@ #as: --gdwarf-3 #readelf: -x.rodata -wlL #name: DWARF2 5 -# The am33 cr16 crx ft32 mn10 msp430 nds32 rl78 and rx targets do not evaluate the subtraction of symbols at assembly time. +# The am33 cr16 crx ft32 mn10 msp430 nds32 and rl78 targets do not evaluate the subtraction of symbols at assembly time. # The mep target tries to relay code sections which breaks symbolic view computations. # The riscv targets do not support the subtraction of symbols. # The loongarch targets do not support the subtraction of symbols. -#xfail: am3*-* cr16-* crx-* ft32*-* loongarch*-* mep-* mn10*-* msp430-* nds32*-* riscv*-* rl78-* rx-* +#xfail: am3*-* cr16-* crx-* ft32*-* loongarch*-* mep-* mn10*-* msp430-* nds32*-* riscv*-* rl78-* Hex dump of section '\.rodata': 0x00000000 01010201 010203 *.* diff --git a/gas/testsuite/gas/elf/elf.exp b/gas/testsuite/gas/elf/elf.exp index 854c78aebd3..c42cef8160e 100644 --- a/gas/testsuite/gas/elf/elf.exp +++ b/gas/testsuite/gas/elf/elf.exp @@ -96,6 +96,7 @@ if { [is_elf_format] } then { } if {[istarget "rx-*-*"]} then { set target_machine -rx + set dump_opts {{as -muse-conventional-section-names}} } if {[istarget "score-*-*"]} then { set target_machine -score @@ -142,7 +143,7 @@ if { [is_elf_format] } then { run_dump_test "group0a" run_dump_test "group0b" run_dump_test "group0c" - run_dump_test "group1a" + run_dump_test "group1a" $dump_opts run_dump_test "group1b" run_dump_test "group2" run_dump_test "group3" @@ -154,7 +155,7 @@ if { [is_elf_format] } then { hppa64*-*-hpux* { } riscv*-*-* { } default { - run_dump_test "groupautoa" + run_dump_test "groupautoa" $dump_opts } } switch -glob $target_triplet { @@ -211,7 +212,7 @@ if { [is_elf_format] } then { run_elf_list_test "section2" "$target_machine" "$as_flags" "-s" "" } run_dump_test "section3" - run_dump_test "section4" + run_dump_test "section4" $dump_opts if {! [istarget "h8300-*-*"] && ! [istarget "rx-*-*"]} then { # The h8300 port issues a warning message for # new sections created without atrributes. @@ -256,8 +257,8 @@ if { [is_elf_format] } then { run_dump_test "section7" run_dump_test "section8" run_dump_test "section9" - run_dump_test "section10" - run_dump_test "section11" + run_dump_test "section10" $dump_opts + run_dump_test "section11" $dump_opts run_dump_test "section12a" run_dump_test "section12b" run_dump_test "section13" @@ -280,11 +281,7 @@ if { [is_elf_format] } then { run_dump_test "section27" run_dump_test "section28" run_dump_test "section29" - if { ![istarget "rx-*-*"] } then { - run_dump_test "section30" - } else { - run_dump_test "section30" {{as -muse-conventional-section-names}} - } + run_dump_test "section30" $dump_opts run_dump_test "sh-link-zero" run_dump_test "size" run_dump_test "dwarf2-1" $dump_opts @@ -371,7 +368,7 @@ if { [is_elf_format] } then { run_dump_test "strtab" - run_dump_test "bignums" + run_dump_test "bignums" $dump_opts run_dump_test "section-symbol-redef" run_dump_test "pr27228" } diff --git a/gas/testsuite/gas/elf/group1a.d b/gas/testsuite/gas/elf/group1a.d index b40d5ddbf90..2ca4de78dab 100644 --- a/gas/testsuite/gas/elf/group1a.d +++ b/gas/testsuite/gas/elf/group1a.d @@ -1,8 +1,6 @@ #readelf: -SW #name: group section with multiple sections of same name (using readelf -SW) #source: group1.s -# The RX port uses non-standard section names. -#xfail: rx-* #... [ ]*\[.*\][ ]+\.group[ ]+GROUP.* diff --git a/gas/testsuite/gas/elf/groupautoa.d b/gas/testsuite/gas/elf/groupautoa.d index 0297a68c9ba..d7481c36010 100644 --- a/gas/testsuite/gas/elf/groupautoa.d +++ b/gas/testsuite/gas/elf/groupautoa.d @@ -1,8 +1,6 @@ #readelf: -SW #name: automatic section group a #source: groupauto.s -# The RX port uses non-standard section names. -#notarget: rx-* #... [ ]*\[.*\][ ]+\.group[ ]+GROUP.* diff --git a/gas/testsuite/gas/elf/section10.d b/gas/testsuite/gas/elf/section10.d index 6aa57d42943..71b8d49b99f 100644 --- a/gas/testsuite/gas/elf/section10.d +++ b/gas/testsuite/gas/elf/section10.d @@ -1,7 +1,5 @@ #readelf: -N --wide #name: numeric section flags and types -# The RX port annoyingly reorders the sections so that they do not match the sequence expected below. -#xfail: rx-*-* #... [ ]*\[.*\][ ]+.text diff --git a/gas/testsuite/gas/elf/section11.d b/gas/testsuite/gas/elf/section11.d index 277fa6df7d6..6af339f0d3b 100644 --- a/gas/testsuite/gas/elf/section11.d +++ b/gas/testsuite/gas/elf/section11.d @@ -1,11 +1,6 @@ #as: --no-pad-sections #readelf: -S --wide #name: Disabling section padding -# The RX port uses non standard section names. -#xfail: loongarch*-* rx-*-* -# LoongArch and RISC-V handles alignment via linker relaxation, so object files don't have -# the expected alignment. -#xfail: riscv*-*-* #... \[ .\] .text[ ]+PROGBITS[ ]+0+00 0+[0-9a-f]+ 0+0(1|4|5) 00 AX 0 0 16 diff --git a/gas/testsuite/gas/elf/section4.d b/gas/testsuite/gas/elf/section4.d index bb13d2b7c60..f5bab79ce78 100644 --- a/gas/testsuite/gas/elf/section4.d +++ b/gas/testsuite/gas/elf/section4.d @@ -1,7 +1,5 @@ #readelf: --sections #name: label arithmetic with multiple same-name sections -# The RX port uses non-standard section names. -#xfail: rx-* #... [ ]*\[.*\][ ]+\.group[ ]+GROUP.*