From: Stan Shebs Date: Tue, 5 Jan 1999 02:31:51 +0000 (+0000) Subject: * gdbint.texinfo: Expand on GDB's coding standards, X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=18b1e896d44de4ada7fb41710880c2fd8fcc1cef;p=binutils-gdb.git * gdbint.texinfo: Expand on GDB's coding standards, specify the use of arg names with prototypes. --- diff --git a/gdb/doc/ChangeLog b/gdb/doc/ChangeLog index a75ee607d76..d64f9919604 100644 --- a/gdb/doc/ChangeLog +++ b/gdb/doc/ChangeLog @@ -1,3 +1,8 @@ +Mon Jan 4 18:29:18 1999 Stan Shebs + + * gdbint.texinfo: Expand on GDB's coding standards, + specify the use of arg names with prototypes. + 1998-12-14 J.T. Conklin * gdb.texinfo: Fix tipo. diff --git a/gdb/doc/gdbint.texinfo b/gdb/doc/gdbint.texinfo index b64620e857d..59f19070fe9 100644 --- a/gdb/doc/gdbint.texinfo +++ b/gdb/doc/gdbint.texinfo @@ -12,7 +12,7 @@ END-INFO-DIR-ENTRY @ifinfo This file documents the internals of the GNU debugger GDB. -Copyright 1990, 91, 92, 93, 94, 95, 96, 97, 1998 Free Software Foundation, Inc. +Copyright 1990-1999 Free Software Foundation, Inc. Contributed by Cygnus Solutions. Written by John Gilmore. Second Edition by Stan Shebs. @@ -55,7 +55,7 @@ regarded as a program in the language TeX). @end tex @vskip 0pt plus 1filll -Copyright @copyright{} 1990, 91, 92, 93, 94, 95, 96, 97, 1998 Free Software Foundation, Inc. +Copyright @copyright{} 1990-1999 Free Software Foundation, Inc. Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice @@ -1562,9 +1562,15 @@ where @var{valbuf} is the address of the value to be stored. The default value of the `symbol-reloading' variable. (Never defined in current sources.) -@item TARGET_BYTE_ORDER -The ordering of bytes in the target. This must be defined to be either -@code{BIG_ENDIAN} or @code{LITTLE_ENDIAN}. +@item TARGET_BYTE_ORDER_DEFAULT +The ordering of bytes in the target. This must be either +@code{BIG_ENDIAN} or @code{LITTLE_ENDIAN}. This macro replaces +@var{TARGET_BYTE_ORDER} which is deprecated. + +@item TARGET_BYTE_ORDER_SELECTABLE_P +Non-zero if the target has both @code{BIG_ENDIAN} and +@code{LITTLE_ENDIAN} variants. This macro replaces +@var{TARGET_BYTE_ORDER_SELECTABLE} which is deprecated. @item TARGET_CHAR_BIT Number of bits in a char; defaults to 8. @@ -2185,22 +2191,96 @@ finish by printing a newline, to flush the wrap buffer, before switching to unfiltered (``@code{printf}'') output. Symbol reading routines that print warnings are a good example. -@section Coding Style +@section GDB Coding Standards GDB follows the GNU coding standards, as described in @file{etc/standards.texi}. This file is also available for anonymous -FTP from GNU archive sites. There are some additional considerations -for GDB maintainers that reflect the unique environment and style of GDB -maintenance. If you follow these guidelines, GDB will be more -consistent and easier to maintain. +FTP from GNU archive sites. GDB takes a strict interpretation of the +standard; in general, when the GNU standard recommends a practice but +does not require it, GDB requires it. + +GDB follows an additional set of coding standards specific to GDB, +as described in the following sections. + +You can configure with @samp{--enable-build-warnings} to get GCC to +check on a number of these rules. GDB sources ought not to engender any +complaints, unless they are caused by bogus host systems. (The exact +set of enabled warnings is currently @samp{-Wall -Wpointer-arith +-Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations}. + +@subsection Formatting + +The standard GNU recommendations for formatting must be followed +strictly. + +Note that while in a definition, the function's name must be in column +zero, in a function declaration, the name must be on the same line as +the return type. -GDB's policy on the use of prototypes is that prototypes are used to -@emph{declare} functions but never to @emph{define} them. Simple macros -are used in the declarations, so that a non-ANSI compiler can compile -GDB without trouble. The simple macro calls are used like this: +In addition, there must be a space between a function or macro name and +the opening parenthesis of its argument list (except for macro +definitions, as required by C). There must not be a space after an open +paren/bracket or before a close paren/bracket. + +While additional whitespace is generally helpful for reading, do not use +more than one blank line to separate blocks, and avoid adding whitespace +after the end of a program line (as of 1/99, some 600 lines had whitespace +after the semicolon). Excess whitespace causes difficulties for diff and +patch. + +@subsection Comments + +The standard GNU requirements on comments must be followed strictly. + +Block comments must appear in the following form, with no `/*'- or +'*/'-only lines, and no leading `*': @example @code -extern int memory_remove_breakpoint PARAMS ((CORE_ADDR, char *)); +/* Wait for control to return from inferior to debugger. If inferior + gets a signal, we may decide to start it up again instead of + returning. That is why there is a loop in this function. When + this function actually returns it means the inferior should be left + stopped and GDB should read more commands. */ +@end example + +(Note that this format is encouraged by Emacs; tabbing for a multi-line +comment works correctly, and M-Q fills the block consistently.) + +Put a blank line between the block comments preceding function or +variable definitions, and the definition itself. + +In general, put function-body comments on lines by themselves, rather +than trying to fit them into the 20 characters left at the end of a +line, since either the comment or the code will inevitably get longer +than will fit, and then somebody will have to move it anyhow. + +@subsection C Usage + +Code must not depend on the sizes of C data types, the format of the +host's floating point numbers, the alignment of anything, or the order +of evaluation of expressions. + +Use functions freely. There are only a handful of compute-bound areas +in GDB that might be affected by the overhead of a function call, mainly +in symbol reading. Most of GDB's performance is limited by the target +interface (whether serial line or system call). + +However, use functions with moderation. A thousand one-line functions +are just as hard to understand as one thousand-line function. + +@subsection Function Prototypes + +Prototypes must be used to @emph{declare} functions but never to +@emph{define} them. Prototypes for GDB functions must include both the +argument type and name, with the name matching that used in the actual +function definition. + +For the sake of compatibility with pre-ANSI compilers, define prototypes +with the @code{PARAMS} macro: + +@example @code +extern int memory_remove_breakpoint PARAMS ((CORE_ADDR addr, + char *contents_cache)); @end example Note the double parentheses around the parameter types. This allows an @@ -2209,22 +2289,21 @@ C preprocessor. When the function has no parameters, it should be described like: @example @code -void noprocess PARAMS ((void)); +extern void noprocess PARAMS ((void)); @end example The @code{PARAMS} macro expands to its argument in ANSI C, or to a simple @code{()} in traditional C. All external functions should have a @code{PARAMS} declaration in a -header file that callers include. All static functions should have such -a declaration near the top of their source file. +header file that callers include, except for @code{_initialize_*} +functions, which must be external so that @file{init.c} construction +works, but shouldn't be visible to random source files. -We don't have a gcc option that will properly check that these rules -have been followed, but it's GDB policy, and we periodically check it -using the tools available (plus manual labor), and clean up any -remnants. +All static functions must be declared in a block near the top of the +source file. -@section Clean Design +@subsection Clean Design In addition to getting the syntax right, there's the little question of semantics. Some things are done in certain ways in GDB because long @@ -2327,11 +2406,6 @@ any system-independent file would (hooks, #if defined, etc.), and machines which are radically different don't need to use infptrace.c at all. -@emph{Do} write code that doesn't depend on the sizes of C data types, -the format of the host's floating point numbers, the alignment of anything, -or the order of evaluation of expressions. In short, follow good -programming practices for writing portable C code. - @node Porting GDB