From: Nick Clifton Date: Sun, 25 Jun 2000 17:59:22 +0000 (+0000) Subject: Fix spelling typos. X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=1994a7c76c7cb0c013596cc97202aa6aa7dacbb2;p=binutils-gdb.git Fix spelling typos. Remove use of DEFUN(). --- diff --git a/gas/ChangeLog b/gas/ChangeLog index 0f135ae1eab..81738840989 100644 --- a/gas/ChangeLog +++ b/gas/ChangeLog @@ -1,5 +1,12 @@ 2000-06-25 Kazu Hirata + * config/obj-aout.c: Remove all uses of DEFUN. + * config/obj-ieee.c: Likewise. + * config/tc-sh.c: Fix comment typos. + * config/tc-tahoe.c: Likewise. + * config/tc-vax.c: Likewise. + * config/tc-w65.c: Likewise. + * config/tc-z8k.c: Likewise. * config/tc-h8300.c (build_bytes): Assemble ldmac correctly. 2000-06-24 DJ Delorie diff --git a/gas/Makefile.in b/gas/Makefile.in index 0f361936881..41040852c27 100644 --- a/gas/Makefile.in +++ b/gas/Makefile.in @@ -1843,7 +1843,7 @@ configure configure.in gdbinit.in itbl-lex.c itbl-parse.c DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) -TAR = tar +TAR = gtar GZIP_ENV = --best SOURCES = $(itbl_test_SOURCES) $(as_new_SOURCES) $(EXTRA_as_new_SOURCES) $(gasp_new_SOURCES) OBJECTS = $(itbl_test_OBJECTS) $(as_new_OBJECTS) $(gasp_new_OBJECTS) diff --git a/gas/aclocal.m4 b/gas/aclocal.m4 index 4b4ca84b06c..2ae06cf088a 100644 --- a/gas/aclocal.m4 +++ b/gas/aclocal.m4 @@ -173,7 +173,7 @@ LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \ LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \ DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \ ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \ -$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \ +$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \ || AC_MSG_ERROR([libtool configure failed]) # Reload cache, that may have been modified by ltconfig @@ -205,11 +205,6 @@ AC_REQUIRE([AC_PROG_NM])dnl AC_REQUIRE([AC_PROG_LN_S])dnl dnl -case "$target" in -NONE) lt_target="$host" ;; -*) lt_target="$target" ;; -esac - # Check for any special flags to pass to ltconfig. libtool_flags="--cache-file=$cache_file" test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared" @@ -228,7 +223,7 @@ test x"$silent" = xyes && libtool_flags="$libtool_flags --silent" # Some flags need to be propagated to the compiler or linker for good # libtool support. -case "$lt_target" in +case "$host" in *-*-irix6*) # Find out which ABI we are using. echo '[#]line __oline__ "configure"' > conftest.$ac_ext @@ -495,7 +490,7 @@ AC_MSG_RESULT([$NM]) AC_DEFUN(AC_CHECK_LIBM, [AC_REQUIRE([AC_CANONICAL_HOST])dnl LIBM= -case "$lt_target" in +case "$host" in *-*-beos* | *-*-cygwin*) # These system don't have libm ;; diff --git a/gas/config/obj-aout.c b/gas/config/obj-aout.c index 3a9b3f1af28..16090776b55 100644 --- a/gas/config/obj-aout.c +++ b/gas/config/obj-aout.c @@ -578,7 +578,7 @@ obj_pre_write_hook (headers) } void -DEFUN_VOID (s_sect) +s_sect () { /* Strip out the section name */ char *section_name; diff --git a/gas/config/obj-ieee.c b/gas/config/obj-ieee.c index 30a0798e295..fbabb64ddbd 100644 --- a/gas/config/obj-ieee.c +++ b/gas/config/obj-ieee.c @@ -55,9 +55,9 @@ relax_align (address, alignment) /* calculate the size of the frag chain and create a bfd section to contain all of it */ static void -DEFUN (size_section, (abfd, idx), - bfd * abfd AND - unsigned int idx) +size_section (abfd, idx) + bfd * abfd; + unsigned int idx; { asection *sec; unsigned int size = 0; @@ -106,9 +106,9 @@ DEFUN (size_section, (abfd, idx), /* run through a frag chain and write out the data to go with it */ static void -DEFUN (fill_section, (abfd, idx), - bfd * abfd AND - unsigned int idx) +fill_section (abfd, idx) + bfd * abfd; + unsigned int idx; { asection *sec = segment_info[idx].user_stuff; if (sec) @@ -159,8 +159,8 @@ DEFUN (fill_section, (abfd, idx), /* Count the relocations in a chain */ static unsigned int -DEFUN (count_entries_in_chain, (idx), - unsigned int idx) +count_entries_in_chain (idx) + unsigned int idx; { unsigned int nrelocs; fixS *fixup_ptr; @@ -178,8 +178,8 @@ DEFUN (count_entries_in_chain, (idx), /* output all the relocations for a section */ void -DEFUN (do_relocs_for, (idx), - unsigned int idx) +do_relocs_for (idx) + unsigned int idx; { unsigned int nrelocs; arelent **reloc_ptr_vector; @@ -270,8 +270,8 @@ DEFUN (do_relocs_for, (idx), /* do the symbols.. */ static void -DEFUN (do_symbols, (abfd), - bfd * abfd) +do_symbols (abfd) + bfd * abfd; { extern symbolS *symbol_rootP; symbolS *ptr; @@ -333,7 +333,7 @@ DEFUN (do_symbols, (abfd), code */ void -DEFUN_VOID (bfd_as_write_hook) +bfd_as_write_hook () { int i; @@ -509,7 +509,7 @@ obj_symbol_new_hook (symbolP) #if 1 extern void -DEFUN_VOID (write_object_file) +write_object_file () { int i; struct frchain *frchain_ptr; diff --git a/gas/config/tc-arm.c b/gas/config/tc-arm.c index 7f7c7eaf4f4..50e4beadae3 100644 --- a/gas/config/tc-arm.c +++ b/gas/config/tc-arm.c @@ -1290,11 +1290,13 @@ static void s_thumb_func (ignore) int ignore ATTRIBUTE_UNUSED; { + if (! thumb_mode) + opcode_select (16); + /* The following label is the name/address of the start of a Thumb function. We need to know this for the interworking support. */ - label_is_thumb_function_name = true; - + demand_empty_rest_of_line (); } diff --git a/gas/config/tc-sh.c b/gas/config/tc-sh.c index 6dcf5154d86..d08b1a42a61 100644 --- a/gas/config/tc-sh.c +++ b/gas/config/tc-sh.c @@ -1285,8 +1285,7 @@ insert_loop_bounds (output, operand) return frag_more (2); } -/* Now we know what sort of opcodes it is, lets build the bytes - - */ +/* Now we know what sort of opcodes it is, lets build the bytes. */ static void build_Mytes (opcode, operand) sh_opcode_info *opcode; diff --git a/gas/config/tc-tahoe.c b/gas/config/tc-tahoe.c index 26a75242c12..58d9639f28b 100644 --- a/gas/config/tc-tahoe.c +++ b/gas/config/tc-tahoe.c @@ -1224,7 +1224,7 @@ tip_op (optex, topP) if (*op_bad == '\0') { - /* statement has no syntax goofs yet: lets sniff the expression */ + /* Statement has no syntax goofs yet: let's sniff the expression. */ input_line_pointer = point; expP = &(topP->exp_of_operand); topP->seg_of_operand = expression (expP); @@ -1526,7 +1526,7 @@ tip (titP, instring) else { /* - * We found a match! So lets pick up as many operands as the + * We found a match! So let's pick up as many operands as the * instruction wants, and even gripe if there are too many. * We expect comma to seperate each operand. * We let instring track the text, while p tracks a part of the diff --git a/gas/config/tc-vax.c b/gas/config/tc-vax.c index 314f9bc5e3e..acf78ee199f 100644 --- a/gas/config/tc-vax.c +++ b/gas/config/tc-vax.c @@ -389,7 +389,7 @@ md_assemble (instruction_string) } else { - /* statement has no syntax goofs: lets sniff the expression */ + /* Statement has no syntax goofs: let's sniff the expression. */ int can_be_short = 0; /* 1 if a bignum can be reduced to a short literal. */ input_line_pointer = operandP->vop_expr_begin; @@ -1795,7 +1795,7 @@ vip (vitP, instring) else { /* - * We found a match! So lets pick up as many operands as the + * We found a match! So let's pick up as many operands as the * instruction wants, and even gripe if there are too many. * We expect comma to seperate each operand. * We let instring track the text, while p tracks a part of the diff --git a/gas/config/tc-w65.c b/gas/config/tc-w65.c index 2c6d85a3a61..7223fa00023 100644 --- a/gas/config/tc-w65.c +++ b/gas/config/tc-w65.c @@ -644,8 +644,7 @@ check (operand, low, high) static int log2[] = {0, 0, 1, 0, 2}; -/* Now we know what sort of opcodes it is, lets build the bytes - - */ +/* Now we know what sort of opcodes it is, let's build the bytes. */ static void build_Mytes (opcode) struct opinfo *opcode; diff --git a/gas/config/tc-z8k.c b/gas/config/tc-z8k.c index 6b60cf55bfa..b66bd50ec6d 100644 --- a/gas/config/tc-z8k.c +++ b/gas/config/tc-z8k.c @@ -1185,9 +1185,8 @@ top:; } /* This is the guts of the machine-dependent assembler. STR points to a - machine dependent instruction. This funciton is supposed to emit - the frags/bytes it assembles to. - */ + machine dependent instruction. This function is supposed to emit + the frags/bytes it assembles to. */ void md_assemble (str) diff --git a/gas/configure b/gas/configure index 3e1e80e47ed..6988db7f667 100755 --- a/gas/configure +++ b/gas/configure @@ -1369,11 +1369,6 @@ else fi -case "$target" in -NONE) lt_target="$host" ;; -*) lt_target="$target" ;; -esac - # Check for any special flags to pass to ltconfig. libtool_flags="--cache-file=$cache_file" test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared" @@ -1394,11 +1389,11 @@ test x"$silent" = xyes && libtool_flags="$libtool_flags --silent" # Some flags need to be propagated to the compiler or linker for good # libtool support. -case "$lt_target" in +case "$host" in *-*-irix6*) # Find out which ABI we are using. - echo '#line 1401 "configure"' > conftest.$ac_ext - if { (eval echo configure:1402: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + echo '#line 1396 "configure"' > conftest.$ac_ext + if { (eval echo configure:1397: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then case "`/usr/bin/file conftest.o`" in *32-bit*) LD="${LD-ld} -32" @@ -1419,19 +1414,19 @@ case "$lt_target" in SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6 -echo "configure:1423: checking whether the C compiler needs -belf" >&5 +echo "configure:1418: checking whether the C compiler needs -belf" >&5 if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1430: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* lt_cv_cc_needs_belf=yes else @@ -1509,7 +1504,7 @@ LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \ LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \ DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \ ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \ -$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \ +$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \ || { echo "configure: error: libtool configure failed" 1>&2; exit 1; } # Reload cache, that may have been modified by ltconfig @@ -2435,7 +2430,7 @@ EOF # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2439: checking for $ac_word" >&5 +echo "configure:2434: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2465,7 +2460,7 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2469: checking for $ac_word" >&5 +echo "configure:2464: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2516,7 +2511,7 @@ fi # Extract the first word of "cl", so it can be a program name with args. set dummy cl; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2520: checking for $ac_word" >&5 +echo "configure:2515: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2548,7 +2543,7 @@ fi fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:2552: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +echo "configure:2547: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. @@ -2559,12 +2554,12 @@ cross_compiling=$ac_cv_prog_cc_cross cat > conftest.$ac_ext << EOF -#line 2563 "configure" +#line 2558 "configure" #include "confdefs.h" main(){return(0);} EOF -if { (eval echo configure:2568: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2563: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -2590,12 +2585,12 @@ if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:2594: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:2589: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:2599: checking whether we are using GNU C" >&5 +echo "configure:2594: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2604,7 +2599,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2608: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2603: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -2623,7 +2618,7 @@ ac_test_CFLAGS="${CFLAGS+set}" ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:2627: checking whether ${CC-cc} accepts -g" >&5 +echo "configure:2622: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2660,7 +2655,7 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2664: checking for $ac_word" >&5 +echo "configure:2659: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2691,7 +2686,7 @@ done test -n "$YACC" || YACC="yacc" echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -echo "configure:2695: checking how to run the C preprocessor" >&5 +echo "configure:2690: checking how to run the C preprocessor" >&5 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= @@ -2706,13 +2701,13 @@ else # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2716: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2711: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -2723,13 +2718,13 @@ else rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2733: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2728: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -2740,13 +2735,13 @@ else rm -rf conftest* CPP="${CC-cc} -nologo -E" cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2750: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2745: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -2776,7 +2771,7 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2780: checking for $ac_word" >&5 +echo "configure:2775: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2809,7 +2804,7 @@ test -n "$LEX" || LEX=""$missing_dir/missing flex"" # Extract the first word of "flex", so it can be a program name with args. set dummy flex; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2813: checking for $ac_word" >&5 +echo "configure:2808: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2843,7 +2838,7 @@ then *) ac_lib=l ;; esac echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6 -echo "configure:2847: checking for yywrap in -l$ac_lib" >&5 +echo "configure:2842: checking for yywrap in -l$ac_lib" >&5 ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -2851,7 +2846,7 @@ else ac_save_LIBS="$LIBS" LIBS="-l$ac_lib $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2861: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -2885,7 +2880,7 @@ fi fi echo $ac_n "checking lex output file root""... $ac_c" 1>&6 -echo "configure:2889: checking lex output file root" >&5 +echo "configure:2884: checking lex output file root" >&5 if eval "test \"`echo '$''{'ac_cv_prog_lex_root'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2906,7 +2901,7 @@ echo "$ac_t""$ac_cv_prog_lex_root" 1>&6 LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root echo $ac_n "checking whether yytext is a pointer""... $ac_c" 1>&6 -echo "configure:2910: checking whether yytext is a pointer" >&5 +echo "configure:2905: checking whether yytext is a pointer" >&5 if eval "test \"`echo '$''{'ac_cv_prog_lex_yytext_pointer'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2918,14 +2913,14 @@ echo 'extern char *yytext;' >>$LEX_OUTPUT_ROOT.c ac_save_LIBS="$LIBS" LIBS="$LIBS $LEXLIB" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2924: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_prog_lex_yytext_pointer=yes else @@ -2949,7 +2944,7 @@ fi ALL_LINGUAS= echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6 -echo "configure:2953: checking for POSIXized ISC" >&5 +echo "configure:2948: checking for POSIXized ISC" >&5 if test -d /etc/conf/kconfig.d && grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1 then @@ -2970,12 +2965,12 @@ else fi echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 -echo "configure:2974: checking for ANSI C header files" >&5 +echo "configure:2969: checking for ANSI C header files" >&5 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include @@ -2983,7 +2978,7 @@ else #include EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2987: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2982: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -3000,7 +2995,7 @@ rm -f conftest* if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat > conftest.$ac_ext < EOF @@ -3018,7 +3013,7 @@ fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat > conftest.$ac_ext < EOF @@ -3039,7 +3034,7 @@ if test "$cross_compiling" = yes; then : else cat > conftest.$ac_ext < #define ISLOWER(c) ('a' <= (c) && (c) <= 'z') @@ -3050,7 +3045,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); exit (0); } EOF -if { (eval echo configure:3054: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:3049: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then : else @@ -3074,12 +3069,12 @@ EOF fi echo $ac_n "checking for working const""... $ac_c" 1>&6 -echo "configure:3078: checking for working const" >&5 +echo "configure:3073: checking for working const" >&5 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:3127: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_const=yes else @@ -3149,21 +3144,21 @@ EOF fi echo $ac_n "checking for inline""... $ac_c" 1>&6 -echo "configure:3153: checking for inline" >&5 +echo "configure:3148: checking for inline" >&5 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_c_inline=no for ac_kw in inline __inline__ __inline; do cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:3162: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_inline=$ac_kw; break else @@ -3189,12 +3184,12 @@ EOF esac echo $ac_n "checking for off_t""... $ac_c" 1>&6 -echo "configure:3193: checking for off_t" >&5 +echo "configure:3188: checking for off_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #if STDC_HEADERS @@ -3222,12 +3217,12 @@ EOF fi echo $ac_n "checking for size_t""... $ac_c" 1>&6 -echo "configure:3226: checking for size_t" >&5 +echo "configure:3221: checking for size_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #if STDC_HEADERS @@ -3257,19 +3252,19 @@ fi # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works # for constant arguments. Useless! echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6 -echo "configure:3261: checking for working alloca.h" >&5 +echo "configure:3256: checking for working alloca.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { char *p = alloca(2 * sizeof(int)); ; return 0; } EOF -if { (eval echo configure:3273: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3268: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_header_alloca_h=yes else @@ -3290,12 +3285,12 @@ EOF fi echo $ac_n "checking for alloca""... $ac_c" 1>&6 -echo "configure:3294: checking for alloca" >&5 +echo "configure:3289: checking for alloca" >&5 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3322: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_func_alloca_works=yes else @@ -3355,12 +3350,12 @@ EOF echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6 -echo "configure:3359: checking whether alloca needs Cray hooks" >&5 +echo "configure:3354: checking whether alloca needs Cray hooks" >&5 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&6 if test $ac_cv_os_cray = yes; then for ac_func in _getb67 GETB67 getb67; do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:3389: checking for $ac_func" >&5 +echo "configure:3384: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3412: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -3440,7 +3435,7 @@ done fi echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6 -echo "configure:3444: checking stack direction for C alloca" >&5 +echo "configure:3439: checking stack direction for C alloca" >&5 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3448,7 +3443,7 @@ else ac_cv_c_stack_direction=0 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:3466: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_c_stack_direction=1 else @@ -3492,17 +3487,17 @@ for ac_hdr in unistd.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:3496: checking for $ac_hdr" >&5 +echo "configure:3491: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:3506: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3501: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -3531,12 +3526,12 @@ done for ac_func in getpagesize do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:3535: checking for $ac_func" >&5 +echo "configure:3530: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3558: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -3584,7 +3579,7 @@ fi done echo $ac_n "checking for working mmap""... $ac_c" 1>&6 -echo "configure:3588: checking for working mmap" >&5 +echo "configure:3583: checking for working mmap" >&5 if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3592,7 +3587,7 @@ else ac_cv_func_mmap_fixed_mapped=no else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:3731: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_func_mmap_fixed_mapped=yes else @@ -3760,17 +3755,17 @@ unistd.h values.h sys/param.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:3764: checking for $ac_hdr" >&5 +echo "configure:3759: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:3774: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3769: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -3800,12 +3795,12 @@ done __argz_count __argz_stringify __argz_next do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:3804: checking for $ac_func" >&5 +echo "configure:3799: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3827: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -3857,12 +3852,12 @@ done for ac_func in stpcpy do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:3861: checking for $ac_func" >&5 +echo "configure:3856: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3884: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -3919,19 +3914,19 @@ EOF if test $ac_cv_header_locale_h = yes; then echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6 -echo "configure:3923: checking for LC_MESSAGES" >&5 +echo "configure:3918: checking for LC_MESSAGES" >&5 if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { return LC_MESSAGES ; return 0; } EOF -if { (eval echo configure:3935: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3930: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* am_cv_val_LC_MESSAGES=yes else @@ -3952,7 +3947,7 @@ EOF fi fi echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6 -echo "configure:3956: checking whether NLS is requested" >&5 +echo "configure:3951: checking whether NLS is requested" >&5 # Check whether --enable-nls or --disable-nls was given. if test "${enable_nls+set}" = set; then enableval="$enable_nls" @@ -3972,7 +3967,7 @@ fi EOF echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6 -echo "configure:3976: checking whether included gettext is requested" >&5 +echo "configure:3971: checking whether included gettext is requested" >&5 # Check whether --with-included-gettext or --without-included-gettext was given. if test "${with_included_gettext+set}" = set; then withval="$with_included_gettext" @@ -3991,17 +3986,17 @@ fi ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for libintl.h""... $ac_c" 1>&6 -echo "configure:3995: checking for libintl.h" >&5 +echo "configure:3990: checking for libintl.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:4005: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:4000: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -4018,19 +4013,19 @@ fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6 -echo "configure:4022: checking for gettext in libc" >&5 +echo "configure:4017: checking for gettext in libc" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { return (int) gettext ("") ; return 0; } EOF -if { (eval echo configure:4034: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4029: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libc=yes else @@ -4046,7 +4041,7 @@ echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6 if test "$gt_cv_func_gettext_libc" != "yes"; then echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6 -echo "configure:4050: checking for bindtextdomain in -lintl" >&5 +echo "configure:4045: checking for bindtextdomain in -lintl" >&5 ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -4054,7 +4049,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lintl $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4064: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -4081,19 +4076,19 @@ fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6 -echo "configure:4085: checking for gettext in libintl" >&5 +echo "configure:4080: checking for gettext in libintl" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4092: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libintl=yes else @@ -4121,7 +4116,7 @@ EOF # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4125: checking for $ac_word" >&5 +echo "configure:4120: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4155,12 +4150,12 @@ fi for ac_func in dcgettext do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:4159: checking for $ac_func" >&5 +echo "configure:4154: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4182: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -4210,7 +4205,7 @@ done # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4214: checking for $ac_word" >&5 +echo "configure:4209: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4246,7 +4241,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4250: checking for $ac_word" >&5 +echo "configure:4245: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4278,7 +4273,7 @@ else fi cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4285: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* CATOBJEXT=.gmo DATADIRNAME=share @@ -4318,7 +4313,7 @@ fi # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4322: checking for $ac_word" >&5 +echo "configure:4317: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4352,7 +4347,7 @@ fi # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4356: checking for $ac_word" >&5 +echo "configure:4351: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4388,7 +4383,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4392: checking for $ac_word" >&5 +echo "configure:4387: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4478,7 +4473,7 @@ fi LINGUAS= else echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6 -echo "configure:4482: checking for catalogs to be installed" >&5 +echo "configure:4477: checking for catalogs to be installed" >&5 NEW_LINGUAS= for lang in ${LINGUAS=$ALL_LINGUAS}; do case "$ALL_LINGUAS" in @@ -4506,17 +4501,17 @@ echo "configure:4482: checking for catalogs to be installed" >&5 if test "$CATOBJEXT" = ".cat"; then ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6 -echo "configure:4510: checking for linux/version.h" >&5 +echo "configure:4505: checking for linux/version.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:4520: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:4515: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -4579,7 +4574,7 @@ fi echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6 -echo "configure:4583: checking whether to enable maintainer-specific portions of Makefiles" >&5 +echo "configure:4578: checking whether to enable maintainer-specific portions of Makefiles" >&5 # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. if test "${enable_maintainer_mode+set}" = set; then enableval="$enable_maintainer_mode" @@ -4602,12 +4597,12 @@ fi echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6 -echo "configure:4606: checking for Cygwin environment" >&5 +echo "configure:4601: checking for Cygwin environment" >&5 if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:4617: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_cygwin=yes else @@ -4635,19 +4630,19 @@ echo "$ac_t""$ac_cv_cygwin" 1>&6 CYGWIN= test "$ac_cv_cygwin" = yes && CYGWIN=yes echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6 -echo "configure:4639: checking for mingw32 environment" >&5 +echo "configure:4634: checking for mingw32 environment" >&5 if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:4646: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_mingw32=yes else @@ -4666,7 +4661,7 @@ test "$ac_cv_mingw32" = yes && MINGW32=yes echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 -echo "configure:4670: checking for executable suffix" >&5 +echo "configure:4665: checking for executable suffix" >&5 if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4676,7 +4671,7 @@ else rm -f conftest* echo 'int main () { return 0; }' > conftest.$ac_ext ac_cv_exeext= - if { (eval echo configure:4680: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then + if { (eval echo configure:4675: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then for file in conftest.*; do case $file in *.c | *.o | *.obj | *.ilk | *.pdb) ;; @@ -4701,17 +4696,17 @@ for ac_hdr in string.h stdlib.h memory.h strings.h unistd.h stdarg.h varargs.h e do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:4705: checking for $ac_hdr" >&5 +echo "configure:4700: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:4715: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:4710: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -4741,7 +4736,7 @@ done # Put this here so that autoconf's "cross-compiling" message doesn't confuse # people who are not cross-compiling but are compiling cross-assemblers. echo $ac_n "checking whether compiling a cross-assembler""... $ac_c" 1>&6 -echo "configure:4745: checking whether compiling a cross-assembler" >&5 +echo "configure:4740: checking whether compiling a cross-assembler" >&5 if test "${host}" = "${target}"; then cross_gas=no else @@ -4756,19 +4751,19 @@ echo "$ac_t""$cross_gas" 1>&6 # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works # for constant arguments. Useless! echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6 -echo "configure:4760: checking for working alloca.h" >&5 +echo "configure:4755: checking for working alloca.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { char *p = alloca(2 * sizeof(int)); ; return 0; } EOF -if { (eval echo configure:4772: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4767: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_header_alloca_h=yes else @@ -4789,12 +4784,12 @@ EOF fi echo $ac_n "checking for alloca""... $ac_c" 1>&6 -echo "configure:4793: checking for alloca" >&5 +echo "configure:4788: checking for alloca" >&5 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4821: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_func_alloca_works=yes else @@ -4854,12 +4849,12 @@ EOF echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6 -echo "configure:4858: checking whether alloca needs Cray hooks" >&5 +echo "configure:4853: checking whether alloca needs Cray hooks" >&5 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&6 if test $ac_cv_os_cray = yes; then for ac_func in _getb67 GETB67 getb67; do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:4888: checking for $ac_func" >&5 +echo "configure:4883: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:4911: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -4939,7 +4934,7 @@ done fi echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6 -echo "configure:4943: checking stack direction for C alloca" >&5 +echo "configure:4938: checking stack direction for C alloca" >&5 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4947,7 +4942,7 @@ else ac_cv_c_stack_direction=0 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:4965: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_c_stack_direction=1 else @@ -4988,21 +4983,21 @@ EOF fi echo $ac_n "checking for inline""... $ac_c" 1>&6 -echo "configure:4992: checking for inline" >&5 +echo "configure:4987: checking for inline" >&5 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_c_inline=no for ac_kw in inline __inline__ __inline; do cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:5001: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_inline=$ac_kw; break else @@ -5032,12 +5027,12 @@ esac for ac_func in unlink remove do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:5036: checking for $ac_func" >&5 +echo "configure:5031: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5059: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -5089,12 +5084,12 @@ done for ac_func in sbrk do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:5093: checking for $ac_func" >&5 +echo "configure:5088: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5116: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -5146,13 +5141,13 @@ done case "${need_libm}" in yes) LIBM= -case "$lt_target" in +case "$host" in *-*-beos* | *-*-cygwin*) # These system don't have libm ;; *-ncr-sysv4.3*) echo $ac_n "checking for _mwvalidcheckl in -lmw""... $ac_c" 1>&6 -echo "configure:5156: checking for _mwvalidcheckl in -lmw" >&5 +echo "configure:5151: checking for _mwvalidcheckl in -lmw" >&5 ac_lib_var=`echo mw'_'_mwvalidcheckl | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -5160,7 +5155,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lmw $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5170: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -5192,7 +5187,7 @@ else fi echo $ac_n "checking for main in -lm""... $ac_c" 1>&6 -echo "configure:5196: checking for main in -lm" >&5 +echo "configure:5191: checking for main in -lm" >&5 ac_lib_var=`echo m'_'main | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -5200,14 +5195,14 @@ else ac_save_LIBS="$LIBS" LIBS="-lm $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5206: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -5230,7 +5225,7 @@ fi ;; *) echo $ac_n "checking for main in -lm""... $ac_c" 1>&6 -echo "configure:5234: checking for main in -lm" >&5 +echo "configure:5229: checking for main in -lm" >&5 ac_lib_var=`echo m'_'main | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -5238,14 +5233,14 @@ else ac_save_LIBS="$LIBS" LIBS="-lm $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5244: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -5276,12 +5271,12 @@ esac # enough, but on some of those systems, the assert macro relies on requoting # working properly! echo $ac_n "checking for working assert macro""... $ac_c" 1>&6 -echo "configure:5280: checking for working assert macro" >&5 +echo "configure:5275: checking for working assert macro" >&5 if eval "test \"`echo '$''{'gas_cv_assert_ok'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include @@ -5297,7 +5292,7 @@ assert (a == b ; return 0; } EOF -if { (eval echo configure:5301: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5296: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gas_cv_assert_ok=yes else @@ -5338,12 +5333,12 @@ gas_test_headers=" " echo $ac_n "checking whether declaration is required for strstr""... $ac_c" 1>&6 -echo "configure:5342: checking whether declaration is required for strstr" >&5 +echo "configure:5337: checking whether declaration is required for strstr" >&5 if eval "test \"`echo '$''{'gas_cv_decl_needed_strstr'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5353: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gas_cv_decl_needed_strstr=no else @@ -5375,12 +5370,12 @@ fi echo $ac_n "checking whether declaration is required for malloc""... $ac_c" 1>&6 -echo "configure:5379: checking whether declaration is required for malloc" >&5 +echo "configure:5374: checking whether declaration is required for malloc" >&5 if eval "test \"`echo '$''{'gas_cv_decl_needed_malloc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5390: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gas_cv_decl_needed_malloc=no else @@ -5412,12 +5407,12 @@ fi echo $ac_n "checking whether declaration is required for free""... $ac_c" 1>&6 -echo "configure:5416: checking whether declaration is required for free" >&5 +echo "configure:5411: checking whether declaration is required for free" >&5 if eval "test \"`echo '$''{'gas_cv_decl_needed_free'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5427: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gas_cv_decl_needed_free=no else @@ -5449,12 +5444,12 @@ fi echo $ac_n "checking whether declaration is required for sbrk""... $ac_c" 1>&6 -echo "configure:5453: checking whether declaration is required for sbrk" >&5 +echo "configure:5448: checking whether declaration is required for sbrk" >&5 if eval "test \"`echo '$''{'gas_cv_decl_needed_sbrk'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5464: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gas_cv_decl_needed_sbrk=no else @@ -5486,12 +5481,12 @@ fi echo $ac_n "checking whether declaration is required for environ""... $ac_c" 1>&6 -echo "configure:5490: checking whether declaration is required for environ" >&5 +echo "configure:5485: checking whether declaration is required for environ" >&5 if eval "test \"`echo '$''{'gas_cv_decl_needed_environ'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5501: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gas_cv_decl_needed_environ=no else @@ -5526,12 +5521,12 @@ fi # for it? echo $ac_n "checking whether declaration is required for errno""... $ac_c" 1>&6 -echo "configure:5530: checking whether declaration is required for errno" >&5 +echo "configure:5525: checking whether declaration is required for errno" >&5 if eval "test \"`echo '$''{'gas_cv_decl_needed_errno'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:5545: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gas_cv_decl_needed_errno=no else diff --git a/gas/doc/c-arm.texi b/gas/doc/c-arm.texi index e3549824032..ee3112d19e1 100644 --- a/gas/doc/c-arm.texi +++ b/gas/doc/c-arm.texi @@ -203,7 +203,8 @@ This directive specifies that the following symbol is the name of a Thumb encoded function. This information is necessary in order to allow the assembler and linker to generate correct code for interworking between Arm and Thumb instructions and should be used even if -interworking is not going to be performed. +interworking is not going to be performed. The presence of this +directive also implies @code{.thumb} @cindex @code{thumb_set} directive, ARM @item .thumb_set diff --git a/gas/macro.c b/gas/macro.c index 3a0b6123062..a8a0ae480d4 100644 --- a/gas/macro.c +++ b/gas/macro.c @@ -305,7 +305,9 @@ getstring (idx, in, acc) { char tchar = in->ptr[idx]; int escaped = 0; + idx++; + while (idx < in->len) { if (in->ptr[idx-1] == '\\') @@ -315,24 +317,29 @@ getstring (idx, in, acc) if (macro_alternate && in->ptr[idx] == '!') { - idx++ ; - sb_add_char (acc, in->ptr[idx++]); + idx ++; + + sb_add_char (acc, in->ptr[idx]); + + idx ++; } else if (escaped && in->ptr[idx] == tchar) { sb_add_char (acc, tchar); - idx++; + idx ++; } else { if (in->ptr[idx] == tchar) { - idx++; + idx ++; + if (idx >= in->len || in->ptr[idx] != tchar) break; } + sb_add_char (acc, in->ptr[idx]); - idx++; + idx ++; } } } diff --git a/gas/po/POTFILES.in b/gas/po/POTFILES.in index c5d9d4a9686..0d00af624b2 100644 --- a/gas/po/POTFILES.in +++ b/gas/po/POTFILES.in @@ -100,6 +100,8 @@ config/tc-tahoe.c config/tc-tahoe.h config/tc-tic30.c config/tc-tic30.h +config/tc-tic54x.c +config/tc-tic54x.h config/tc-tic80.c config/tc-tic80.h config/tc-v850.c diff --git a/gas/po/gas.pot b/gas/po/gas.pot index 7e02403d48b..f0eb988f6e4 100644 --- a/gas/po/gas.pot +++ b/gas/po/gas.pot @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2000-06-18 18:12-0700\n" +"POT-Creation-Date: 2000-06-25 09:48-0700\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -976,11 +976,11 @@ msgid "Broken assembler. No assembly attempted." msgstr "" #: config/tc-a29k.c:375 config/tc-arc.c:535 config/tc-avr.c:1045 -#: config/tc-d10v.c:514 config/tc-d30v.c:553 config/tc-h8300.c:304 +#: config/tc-d10v.c:514 config/tc-d30v.c:553 config/tc-h8300.c:298 #: config/tc-h8500.c:297 config/tc-mcore.c:656 config/tc-mn10200.c:935 #: config/tc-mn10300.c:1303 config/tc-ppc.c:1970 config/tc-sh.c:638 #: config/tc-tic80.c:291 config/tc-v850.c:2034 config/tc-w65.c:257 -#: config/tc-z8k.c:338 +#: config/tc-z8k.c:339 msgid "missing operand" msgstr "" @@ -1050,10 +1050,10 @@ msgstr "" msgid "syntax error" msgstr "" -#: config/tc-alpha.c:1025 config/tc-arm.c:5220 config/tc-h8300.c:1409 +#: config/tc-alpha.c:1025 config/tc-arm.c:5222 config/tc-h8300.c:1374 #: config/tc-h8500.c:1221 config/tc-hppa.c:3989 config/tc-i860.c:813 #: config/tc-m68hc11.c:486 config/tc-m68k.c:4125 config/tc-m88k.c:1106 -#: config/tc-ns32k.c:1589 config/tc-sparc.c:2757 config/tc-z8k.c:1352 +#: config/tc-ns32k.c:1589 config/tc-sparc.c:2757 config/tc-z8k.c:1353 msgid "Bad call to MD_ATOF()" msgstr "" @@ -1314,7 +1314,7 @@ msgstr "" msgid "Bad .fmask directive" msgstr "" -#: config/tc-alpha.c:5169 config/tc-arm.c:1331 read.c:2149 read.c:2729 +#: config/tc-alpha.c:5169 config/tc-arm.c:1333 read.c:2149 read.c:2729 #: stabs.c:459 #, c-format msgid "Expected comma after name \"%s\"" @@ -1412,7 +1412,7 @@ msgstr "" msgid "conditional branch follows set of flags" msgstr "" -#: config/tc-arc.c:749 config/tc-arm.c:6425 +#: config/tc-arc.c:749 config/tc-arm.c:6427 #, c-format msgid "bad instruction `%s'" msgstr "" @@ -1465,7 +1465,7 @@ msgstr "" msgid "expression too complex for %%st" msgstr "" -#: config/tc-arc.c:1326 config/tc-arm.c:3195 config/tc-avr.c:771 +#: config/tc-arc.c:1326 config/tc-arm.c:3197 config/tc-avr.c:771 #: config/tc-d10v.c:1532 config/tc-d30v.c:1827 config/tc-mips.c:3250 #: config/tc-mips.c:4182 config/tc-mips.c:4967 config/tc-mips.c:5513 #: config/tc-ppc.c:4846 config/tc-v850.c:2341 @@ -1498,562 +1498,562 @@ msgstr "" msgid "Alignment negative. 0 assumed." msgstr "" -#: config/tc-arm.c:1380 config/tc-m32r.c:418 read.c:2788 read.c:4865 +#: config/tc-arm.c:1382 config/tc-m32r.c:418 read.c:2788 read.c:4865 #, c-format msgid "symbol `%s' already defined" msgstr "" -#: config/tc-arm.c:1450 +#: config/tc-arm.c:1452 msgid "selected processor does not support THUMB opcodes" msgstr "" -#: config/tc-arm.c:1462 +#: config/tc-arm.c:1464 msgid "selected processor does not support ARM opcodes" msgstr "" -#: config/tc-arm.c:1471 +#: config/tc-arm.c:1473 #, c-format msgid "invalid instruction size selected (%d)" msgstr "" -#: config/tc-arm.c:1506 +#: config/tc-arm.c:1508 #, c-format msgid "invalid operand to .code directive (%d) (expecting 16 or 32)" msgstr "" -#: config/tc-arm.c:1517 +#: config/tc-arm.c:1519 msgid "Garbage following instruction" msgstr "" #. In the few cases where we might be able to accept something else #. this error can be overridden. -#: config/tc-arm.c:1566 +#: config/tc-arm.c:1568 #, c-format msgid "Register expected, not '%.100s'" msgstr "" #. In the few cases where we might be able to accept #. something else this error can be overridden. -#: config/tc-arm.c:1630 +#: config/tc-arm.c:1632 msgid "flag for {c}psr instruction expected" msgstr "" -#: config/tc-arm.c:1660 +#: config/tc-arm.c:1662 msgid "Illegal co-processor number" msgstr "" -#: config/tc-arm.c:1667 +#: config/tc-arm.c:1669 msgid "Bad or missing co-processor number" msgstr "" -#: config/tc-arm.c:1691 +#: config/tc-arm.c:1693 msgid "bad or missing expression" msgstr "" -#: config/tc-arm.c:1697 +#: config/tc-arm.c:1699 msgid "immediate co-processor expression too large" msgstr "" #. In the few cases where we might be able to accept something else #. this error can be overridden. -#: config/tc-arm.c:1722 +#: config/tc-arm.c:1724 msgid "Co-processor register expected" msgstr "" #. In the few cases where we might be able to accept something else #. this error can be overridden. -#: config/tc-arm.c:1746 +#: config/tc-arm.c:1748 msgid "Floating point register expected" msgstr "" -#: config/tc-arm.c:1763 +#: config/tc-arm.c:1765 msgid "immediate expression expected" msgstr "" -#: config/tc-arm.c:1778 +#: config/tc-arm.c:1780 msgid "co-processor address must be word aligned" msgstr "" -#: config/tc-arm.c:1784 +#: config/tc-arm.c:1786 msgid "offset too large" msgstr "" -#: config/tc-arm.c:1832 +#: config/tc-arm.c:1834 msgid "pc may not be used in post-increment" msgstr "" -#: config/tc-arm.c:1848 config/tc-arm.c:2987 +#: config/tc-arm.c:1850 config/tc-arm.c:2989 msgid "pre-indexed expression expected" msgstr "" -#: config/tc-arm.c:1861 config/tc-arm.c:2999 config/tc-arm.c:3341 +#: config/tc-arm.c:1863 config/tc-arm.c:3001 config/tc-arm.c:3343 msgid "missing ]" msgstr "" -#: config/tc-arm.c:1871 +#: config/tc-arm.c:1873 msgid "pc may not be used with write-back" msgstr "" -#: config/tc-arm.c:1926 +#: config/tc-arm.c:1928 msgid "comma expected after register name" msgstr "" -#: config/tc-arm.c:1944 +#: config/tc-arm.c:1946 msgid "{C|S}PSR expected" msgstr "" -#: config/tc-arm.c:1971 +#: config/tc-arm.c:1973 msgid "comma missing after psr flags" msgstr "" -#: config/tc-arm.c:1987 config/tc-arm.c:1996 +#: config/tc-arm.c:1989 config/tc-arm.c:1998 msgid "only a register or immediate value can follow a psr flag" msgstr "" -#: config/tc-arm.c:2002 +#: config/tc-arm.c:2004 msgid "can only set flag field with immediate value" msgstr "" -#: config/tc-arm.c:2019 config/tc-arm.c:2324 config/tc-arm.c:2576 -#: config/tc-arm.c:2596 +#: config/tc-arm.c:2021 config/tc-arm.c:2326 config/tc-arm.c:2578 +#: config/tc-arm.c:2598 msgid "Invalid constant" msgstr "" -#: config/tc-arm.c:2069 +#: config/tc-arm.c:2071 msgid "rdhi, rdlo and rm must all be different" msgstr "" -#: config/tc-arm.c:2125 +#: config/tc-arm.c:2127 msgid "rd and rm should be different in mul" msgstr "" -#: config/tc-arm.c:2181 +#: config/tc-arm.c:2183 msgid "rd and rm should be different in mla" msgstr "" -#: config/tc-arm.c:2308 +#: config/tc-arm.c:2310 msgid "bad_segment" msgstr "" -#: config/tc-arm.c:2354 config/tc-arm.c:2431 +#: config/tc-arm.c:2356 config/tc-arm.c:2433 msgid "Shift expression expected" msgstr "" -#: config/tc-arm.c:2395 +#: config/tc-arm.c:2397 msgid "Invalid immediate shift" msgstr "" -#: config/tc-arm.c:2424 +#: config/tc-arm.c:2426 msgid "shift requires register or #expression" msgstr "" -#: config/tc-arm.c:2425 +#: config/tc-arm.c:2427 msgid "shift requires #expression" msgstr "" -#: config/tc-arm.c:2567 config/tc-arm.c:3028 +#: config/tc-arm.c:2569 config/tc-arm.c:3030 msgid "Constant expression expected" msgstr "" -#: config/tc-arm.c:2609 +#: config/tc-arm.c:2611 msgid "Register or shift expression expected" msgstr "" -#: config/tc-arm.c:2662 +#: config/tc-arm.c:2664 msgid "Invalid floating point immediate expression" msgstr "" -#: config/tc-arm.c:2665 +#: config/tc-arm.c:2667 msgid "Floating point register or immediate expression expected" msgstr "" -#: config/tc-arm.c:2834 +#: config/tc-arm.c:2836 msgid "address offset too large" msgstr "" -#: config/tc-arm.c:2906 +#: config/tc-arm.c:2908 msgid "Processor does not support halfwords or signed bytes" msgstr "" -#: config/tc-arm.c:2927 +#: config/tc-arm.c:2929 msgid "Address expected" msgstr "" -#: config/tc-arm.c:2957 config/tc-arm.c:2971 config/tc-arm.c:3008 +#: config/tc-arm.c:2959 config/tc-arm.c:2973 config/tc-arm.c:3010 #, c-format msgid "%s register same as write-back base" msgstr "" -#: config/tc-arm.c:2958 config/tc-arm.c:2972 config/tc-arm.c:3009 +#: config/tc-arm.c:2960 config/tc-arm.c:2974 config/tc-arm.c:3011 msgid "destination" msgstr "" -#: config/tc-arm.c:2958 config/tc-arm.c:2972 config/tc-arm.c:3009 +#: config/tc-arm.c:2960 config/tc-arm.c:2974 config/tc-arm.c:3011 msgid "source" msgstr "" -#: config/tc-arm.c:3048 +#: config/tc-arm.c:3050 msgid "literal pool insertion failed" msgstr "" -#: config/tc-arm.c:3086 +#: config/tc-arm.c:3088 msgid "Pre-increment instruction with translate" msgstr "" -#: config/tc-arm.c:3127 +#: config/tc-arm.c:3129 msgid "Bad range in register list" msgstr "" -#: config/tc-arm.c:3135 config/tc-arm.c:3144 config/tc-arm.c:3185 +#: config/tc-arm.c:3137 config/tc-arm.c:3146 config/tc-arm.c:3187 #, c-format msgid "Warning: Duplicated register (r%d) in register list" msgstr "" -#: config/tc-arm.c:3147 +#: config/tc-arm.c:3149 msgid "Warning: Register range not in ascending order" msgstr "" -#: config/tc-arm.c:3158 +#: config/tc-arm.c:3160 msgid "Missing `}'" msgstr "" -#: config/tc-arm.c:3174 +#: config/tc-arm.c:3176 msgid "invalid register mask" msgstr "" -#: config/tc-arm.c:3233 +#: config/tc-arm.c:3235 msgid "r15 not allowed as base register" msgstr "" -#: config/tc-arm.c:3301 config/tc-arm.c:3315 +#: config/tc-arm.c:3303 config/tc-arm.c:3317 msgid "r15 not allowed in swap" msgstr "" -#: config/tc-arm.c:3668 config/tc-v850.c:1922 config/tc-v850.c:1943 +#: config/tc-arm.c:3670 config/tc-v850.c:1922 config/tc-v850.c:1943 msgid "constant expression expected" msgstr "" -#: config/tc-arm.c:3674 +#: config/tc-arm.c:3676 msgid "Constant value required for number of registers" msgstr "" -#: config/tc-arm.c:3682 +#: config/tc-arm.c:3684 msgid "number of registers must be in the range [1:4]" msgstr "" -#: config/tc-arm.c:3742 +#: config/tc-arm.c:3744 msgid "R15 not allowed as base register with write-back" msgstr "" -#: config/tc-arm.c:3989 +#: config/tc-arm.c:3991 msgid "lo register required" msgstr "" -#: config/tc-arm.c:3997 +#: config/tc-arm.c:3999 msgid "hi register required" msgstr "" -#: config/tc-arm.c:4066 +#: config/tc-arm.c:4068 msgid "dest and source1 must be the same register" msgstr "" -#: config/tc-arm.c:4073 +#: config/tc-arm.c:4075 msgid "subtract valid only on lo regs" msgstr "" -#: config/tc-arm.c:4097 +#: config/tc-arm.c:4099 msgid "invalid Hi register with immediate" msgstr "" -#: config/tc-arm.c:4124 config/tc-arm.c:4157 config/tc-arm.c:4167 +#: config/tc-arm.c:4126 config/tc-arm.c:4159 config/tc-arm.c:4169 msgid "immediate value out of range" msgstr "" -#: config/tc-arm.c:4135 +#: config/tc-arm.c:4137 msgid "invalid immediate value for stack adjust" msgstr "" -#: config/tc-arm.c:4146 +#: config/tc-arm.c:4148 msgid "invalid immediate for address calculation" msgstr "" -#: config/tc-arm.c:4233 +#: config/tc-arm.c:4235 msgid "source1 and dest must be same register" msgstr "" -#: config/tc-arm.c:4268 +#: config/tc-arm.c:4270 msgid "Invalid immediate for shift" msgstr "" -#: config/tc-arm.c:4347 +#: config/tc-arm.c:4349 msgid "only lo regs allowed with immediate" msgstr "" -#: config/tc-arm.c:4366 +#: config/tc-arm.c:4368 msgid "invalid immediate" msgstr "" -#: config/tc-arm.c:4420 +#: config/tc-arm.c:4422 msgid "expected ']'" msgstr "" -#: config/tc-arm.c:4486 +#: config/tc-arm.c:4488 msgid "byte or halfword not valid for base register" msgstr "" -#: config/tc-arm.c:4491 +#: config/tc-arm.c:4493 msgid "R15 based store not allowed" msgstr "" -#: config/tc-arm.c:4496 +#: config/tc-arm.c:4498 msgid "Invalid base register for register offset" msgstr "" -#: config/tc-arm.c:4514 +#: config/tc-arm.c:4516 msgid "invalid offset" msgstr "" -#: config/tc-arm.c:4525 +#: config/tc-arm.c:4527 msgid "invalid base register in load/store" msgstr "" -#: config/tc-arm.c:4549 +#: config/tc-arm.c:4551 msgid "Invalid offset" msgstr "" -#: config/tc-arm.c:4623 +#: config/tc-arm.c:4625 msgid "dest and source1 one must be the same register" msgstr "" -#: config/tc-arm.c:4631 +#: config/tc-arm.c:4633 msgid "Rs and Rd must be different in MUL" msgstr "" -#: config/tc-arm.c:4775 +#: config/tc-arm.c:4777 msgid "" "Inserted missing '!': load/store multiple always writes back base register" msgstr "" -#: config/tc-arm.c:4791 config/tc-arm.c:4891 +#: config/tc-arm.c:4793 config/tc-arm.c:4893 msgid "Expression too complex" msgstr "" -#: config/tc-arm.c:4797 +#: config/tc-arm.c:4799 msgid "only lo-regs valid in load/store multiple" msgstr "" -#: config/tc-arm.c:4843 +#: config/tc-arm.c:4845 msgid "Syntax: ldrs[b] Rd, [Rb, Ro]" msgstr "" -#: config/tc-arm.c:4907 +#: config/tc-arm.c:4909 msgid "invalid register list to push/pop instruction" msgstr "" -#: config/tc-arm.c:5049 +#: config/tc-arm.c:5051 msgid "Virtual memory exhausted" msgstr "" -#: config/tc-arm.c:5421 +#: config/tc-arm.c:5423 #, c-format msgid "invalid constant (%lx) after fixup" msgstr "" -#: config/tc-arm.c:5455 +#: config/tc-arm.c:5457 #, c-format msgid "Unable to compute ADRL instructions for PC offset of 0x%x" msgstr "" -#: config/tc-arm.c:5483 +#: config/tc-arm.c:5485 #, c-format msgid "bad immediate value for offset (%ld)" msgstr "" -#: config/tc-arm.c:5504 config/tc-arm.c:5526 +#: config/tc-arm.c:5506 config/tc-arm.c:5528 msgid "invalid literal constant: pool needs to be closer" msgstr "" -#: config/tc-arm.c:5506 +#: config/tc-arm.c:5508 #, c-format msgid "bad immediate value for half-word offset (%ld)" msgstr "" -#: config/tc-arm.c:5543 +#: config/tc-arm.c:5545 msgid "shift expression is too large" msgstr "" -#: config/tc-arm.c:5561 config/tc-arm.c:5570 +#: config/tc-arm.c:5563 config/tc-arm.c:5572 msgid "Invalid swi expression" msgstr "" -#: config/tc-arm.c:5580 +#: config/tc-arm.c:5582 msgid "Invalid expression in load/store multiple" msgstr "" -#: config/tc-arm.c:5632 +#: config/tc-arm.c:5634 msgid "gas can't handle same-section branch dest >= 0x04000000" msgstr "" -#: config/tc-arm.c:5641 +#: config/tc-arm.c:5643 msgid "out of range branch" msgstr "" -#: config/tc-arm.c:5674 config/tc-arm.c:5690 config/tc-mips.c:9806 +#: config/tc-arm.c:5676 config/tc-arm.c:5692 config/tc-mips.c:9806 msgid "Branch out of range" msgstr "" -#: config/tc-arm.c:5713 +#: config/tc-arm.c:5715 msgid "Branch with link out of range" msgstr "" -#: config/tc-arm.c:5780 +#: config/tc-arm.c:5782 msgid "Illegal value for co-processor offset" msgstr "" -#: config/tc-arm.c:5803 +#: config/tc-arm.c:5805 #, c-format msgid "Invalid offset, target not word aligned (0x%08X)" msgstr "" -#: config/tc-arm.c:5808 config/tc-arm.c:5817 config/tc-arm.c:5824 -#: config/tc-arm.c:5831 config/tc-arm.c:5838 +#: config/tc-arm.c:5810 config/tc-arm.c:5819 config/tc-arm.c:5826 +#: config/tc-arm.c:5833 config/tc-arm.c:5840 #, c-format msgid "Invalid offset, value too big (0x%08X)" msgstr "" -#: config/tc-arm.c:5875 +#: config/tc-arm.c:5877 msgid "Invalid immediate for stack address calculation" msgstr "" -#: config/tc-arm.c:5884 +#: config/tc-arm.c:5886 #, c-format msgid "Invalid immediate for address calculation (value = 0x%08lX)" msgstr "" -#: config/tc-arm.c:5894 +#: config/tc-arm.c:5896 msgid "Invalid 8bit immediate" msgstr "" -#: config/tc-arm.c:5902 +#: config/tc-arm.c:5904 msgid "Invalid 3bit immediate" msgstr "" -#: config/tc-arm.c:5918 +#: config/tc-arm.c:5920 #, c-format msgid "Invalid immediate: %ld is too large" msgstr "" -#: config/tc-arm.c:5933 +#: config/tc-arm.c:5935 #, c-format msgid "Illegal Thumb shift value: %ld" msgstr "" -#: config/tc-arm.c:5947 +#: config/tc-arm.c:5949 #, c-format msgid "Bad relocation fixup type (%d)" msgstr "" -#: config/tc-arm.c:6019 +#: config/tc-arm.c:6021 msgid "Literal referenced across section boundary (Implicit dump?)" msgstr "" -#: config/tc-arm.c:6032 +#: config/tc-arm.c:6034 #, c-format msgid "Internal_relocation (type %d) not fixed up (IMMEDIATE)" msgstr "" -#: config/tc-arm.c:6038 +#: config/tc-arm.c:6040 msgid "ADRL used for a symbol not defined in the same file" msgstr "" -#: config/tc-arm.c:6044 +#: config/tc-arm.c:6046 #, c-format msgid "Internal_relocation (type %d) not fixed up (OFFSET_IMM)" msgstr "" -#: config/tc-arm.c:6064 config/tc-mcore.c:2110 config/tc-ns32k.c:2283 +#: config/tc-arm.c:6066 config/tc-mcore.c:2110 config/tc-ns32k.c:2283 msgid "" msgstr "" -#: config/tc-arm.c:6067 +#: config/tc-arm.c:6069 #, c-format msgid "Can not represent %s relocation in this object file format (%d)" msgstr "" -#: config/tc-arm.c:6088 config/tc-mips.c:11302 config/tc-sh.c:2953 +#: config/tc-arm.c:6090 config/tc-mips.c:11302 config/tc-sh.c:2953 #, c-format msgid "Can not represent %s relocation in this object file format" msgstr "" -#: config/tc-arm.c:6106 +#: config/tc-arm.c:6108 msgid "md_estimate_size_before_relax\n" msgstr "" -#: config/tc-arm.c:6181 +#: config/tc-arm.c:6183 #, c-format msgid "No operator -- statement `%s'\n" msgstr "" -#: config/tc-arm.c:6199 +#: config/tc-arm.c:6201 msgid "selected processor does not support this opcode" msgstr "" -#: config/tc-arm.c:6245 +#: config/tc-arm.c:6247 #, c-format msgid "Opcode `%s' must have suffix from list: <%s>" msgstr "" -#: config/tc-arm.c:6275 +#: config/tc-arm.c:6277 msgid "Warning: Use of the 'nv' conditional is deprecated\n" msgstr "" -#: config/tc-arm.c:6292 +#: config/tc-arm.c:6294 #, c-format msgid "Opcode `%s' is unconditional\n" msgstr "" -#: config/tc-arm.c:6317 +#: config/tc-arm.c:6319 #, c-format msgid "Opcode `%s' must have suffix from <%s>\n" msgstr "" -#: config/tc-arm.c:6403 +#: config/tc-arm.c:6405 #, c-format msgid "register '%s' does not exist\n" msgstr "" -#: config/tc-arm.c:6408 +#: config/tc-arm.c:6410 #, c-format msgid "ignoring redefinition of register alias '%s'" msgstr "" -#: config/tc-arm.c:6414 +#: config/tc-arm.c:6416 #, c-format msgid "" "ignoring redefinition of register alias '%s' to non-existant register '%s'" msgstr "" -#: config/tc-arm.c:6418 +#: config/tc-arm.c:6420 msgid "ignoring incomplete .req pseuso op" msgstr "" -#: config/tc-arm.c:6598 +#: config/tc-arm.c:6600 #, c-format msgid "Unrecognised APCS switch -m%s" msgstr "" -#: config/tc-arm.c:6741 config/tc-arm.c:6754 config/tc-arm.c:6767 -#: config/tc-arm.c:6779 config/tc-arm.c:6785 +#: config/tc-arm.c:6743 config/tc-arm.c:6756 config/tc-arm.c:6769 +#: config/tc-arm.c:6781 config/tc-arm.c:6787 #, c-format msgid "Invalid architecture variant -m%s" msgstr "" -#: config/tc-arm.c:6792 +#: config/tc-arm.c:6794 #, c-format msgid "Invalid processor variant -m%s" msgstr "" -#: config/tc-arm.c:6815 +#: config/tc-arm.c:6817 msgid "" " ARM Specific Assembler Options:\n" " -m[arm][] select processor variant\n" @@ -2069,7 +2069,7 @@ msgid "" " -k generate PIC code.\n" msgstr "" -#: config/tc-arm.c:6827 +#: config/tc-arm.c:6829 msgid "" " -mapcs-32, -mapcs-26 specify which ARM Procedure Calling Standard to " "use\n" @@ -2077,17 +2077,17 @@ msgid "" " -mapcs-reentrant the code is position independent/reentrant\n" msgstr "" -#: config/tc-arm.c:6833 +#: config/tc-arm.c:6835 msgid " -moabi support the old ELF ABI\n" msgstr "" -#: config/tc-arm.c:6837 +#: config/tc-arm.c:6839 msgid "" " -EB assemble code for a big endian cpu\n" " -EL assemble code for a little endian cpu\n" msgstr "" -#: config/tc-arm.c:6987 +#: config/tc-arm.c:6989 #, c-format msgid "%s: unexpected function type: %d" msgstr "" @@ -2211,8 +2211,8 @@ msgid "reloc %d not supported by object file format" msgstr "" #: config/tc-avr.c:1006 config/tc-d10v.c:1085 config/tc-d10v.c:1099 -#: config/tc-h8300.c:1275 config/tc-h8500.c:1121 config/tc-mcore.c:989 -#: config/tc-pj.c:274 config/tc-sh.c:1437 config/tc-z8k.c:1220 +#: config/tc-h8300.c:1241 config/tc-h8500.c:1121 config/tc-mcore.c:989 +#: config/tc-pj.c:274 config/tc-sh.c:1437 config/tc-z8k.c:1221 msgid "can't find opcode " msgstr "" @@ -2471,106 +2471,106 @@ msgstr "" msgid "Bad call to md_atof()" msgstr "" -#: config/tc-h8300.c:253 config/tc-h8300.c:261 +#: config/tc-h8300.c:247 config/tc-h8300.c:255 msgid "Reg not valid for H8/300" msgstr "" -#: config/tc-h8300.c:422 config/tc-h8300.c:425 config/tc-h8300.c:428 -#: config/tc-h8300.c:432 +#: config/tc-h8300.c:415 config/tc-h8300.c:418 config/tc-h8300.c:421 +#: config/tc-h8300.c:425 msgid "Invalid register list for ldm/stm\n" msgstr "" -#: config/tc-h8300.c:489 config/tc-h8300.c:552 config/tc-h8300.c:559 +#: config/tc-h8300.c:477 config/tc-h8300.c:539 config/tc-h8300.c:546 msgid "Wrong size pointer register for architecture." msgstr "" -#: config/tc-h8300.c:517 config/tc-h8300.c:526 config/tc-h8300.c:536 +#: config/tc-h8300.c:504 config/tc-h8300.c:513 config/tc-h8300.c:523 msgid "expected @(exp, reg16)" msgstr "" -#: config/tc-h8300.c:616 +#: config/tc-h8300.c:602 msgid "expect :8 or :16 here" msgstr "" -#: config/tc-h8300.c:822 +#: config/tc-h8300.c:803 #, c-format msgid "operand %s0x%lx out of range." msgstr "" -#: config/tc-h8300.c:914 +#: config/tc-h8300.c:891 msgid "Can't work out size of operand.\n" msgstr "" -#: config/tc-h8300.c:964 +#: config/tc-h8300.c:939 #, c-format msgid "Opcode `%s' with these operand types not available in H8/300 mode" msgstr "" -#: config/tc-h8300.c:1016 config/tc-h8300.c:1036 +#: config/tc-h8300.c:990 config/tc-h8300.c:1010 msgid "Need #1 or #2 here" msgstr "" -#: config/tc-h8300.c:1031 +#: config/tc-h8300.c:1005 msgid "#4 not valid on H8/300." msgstr "" -#: config/tc-h8300.c:1112 config/tc-h8300.c:1145 +#: config/tc-h8300.c:1091 config/tc-h8300.c:1123 #, c-format msgid "branch operand has odd offset (%lx)\n" msgstr "" -#: config/tc-h8300.c:1187 +#: config/tc-h8300.c:1161 msgid "destination operand must be 16 bit register" msgstr "" -#: config/tc-h8300.c:1197 +#: config/tc-h8300.c:1170 msgid "source operand must be 8 bit register" msgstr "" -#: config/tc-h8300.c:1205 +#: config/tc-h8300.c:1178 msgid "destination operand must be 16bit absolute address" msgstr "" -#: config/tc-h8300.c:1212 +#: config/tc-h8300.c:1185 msgid "destination operand must be 8 bit register" msgstr "" -#: config/tc-h8300.c:1221 +#: config/tc-h8300.c:1193 msgid "source operand must be 16bit absolute address" msgstr "" -#: config/tc-h8300.c:1229 +#: config/tc-h8300.c:1201 msgid "invalid operands" msgstr "" -#: config/tc-h8300.c:1286 config/tc-h8500.c:1128 config/tc-mips.c:7966 -#: config/tc-sh.c:1666 config/tc-w65.c:759 config/tc-z8k.c:1232 +#: config/tc-h8300.c:1252 config/tc-h8500.c:1128 config/tc-mips.c:7966 +#: config/tc-sh.c:1666 config/tc-w65.c:759 config/tc-z8k.c:1233 msgid "unknown opcode" msgstr "" -#: config/tc-h8300.c:1332 +#: config/tc-h8300.c:1298 msgid "mismatch between opcode size and operand size" msgstr "" -#: config/tc-h8300.c:1344 config/tc-h8500.c:1156 config/tc-sh.c:1780 -#: config/tc-w65.c:791 config/tc-z8k.c:1287 +#: config/tc-h8300.c:1309 config/tc-h8500.c:1156 config/tc-sh.c:1780 +#: config/tc-w65.c:791 config/tc-z8k.c:1288 msgid "call to tc_crawl_symbol_chain \n" msgstr "" -#: config/tc-h8300.c:1358 config/tc-h8500.c:1170 config/tc-sh.c:1787 -#: config/tc-w65.c:805 config/tc-z8k.c:1301 +#: config/tc-h8300.c:1323 config/tc-h8500.c:1170 config/tc-sh.c:1787 +#: config/tc-w65.c:805 config/tc-z8k.c:1302 msgid "call to tc_headers_hook \n" msgstr "" -#: config/tc-h8300.c:1447 config/tc-h8500.c:1259 config/tc-z8k.c:1412 +#: config/tc-h8300.c:1413 config/tc-h8500.c:1259 config/tc-z8k.c:1413 msgid "call to tc_aout_fix_to_chars \n" msgstr "" -#: config/tc-h8300.c:1457 config/tc-z8k.c:1422 +#: config/tc-h8300.c:1423 config/tc-z8k.c:1423 msgid "call to md_convert_frag \n" msgstr "" -#: config/tc-h8300.c:1502 config/tc-z8k.c:1497 +#: config/tc-h8300.c:1468 config/tc-z8k.c:1498 msgid "call tomd_estimate_size_before_relax \n" msgstr "" @@ -3037,279 +3037,279 @@ msgstr "" msgid "Unknown" msgstr "" -#: config/tc-i386.c:1000 config/tc-i386.c:4471 +#: config/tc-i386.c:1000 config/tc-i386.c:4456 #, c-format msgid "can not do %d byte pc-relative relocation" msgstr "" -#: config/tc-i386.c:1010 config/tc-i386.c:4485 +#: config/tc-i386.c:1010 config/tc-i386.c:4470 #, c-format msgid "can not do %d byte relocation" msgstr "" -#: config/tc-i386.c:1115 config/tc-i386.c:1198 +#: config/tc-i386.c:1114 config/tc-i386.c:1197 #, c-format msgid "no such instruction: `%s'" msgstr "" -#: config/tc-i386.c:1124 +#: config/tc-i386.c:1123 #, c-format msgid "invalid character %s in mnemonic" msgstr "" -#: config/tc-i386.c:1131 +#: config/tc-i386.c:1130 msgid "expecting prefix; got nothing" msgstr "" -#: config/tc-i386.c:1133 +#: config/tc-i386.c:1132 msgid "expecting mnemonic; got nothing" msgstr "" -#: config/tc-i386.c:1151 +#: config/tc-i386.c:1150 #, c-format msgid "redundant %s prefix" msgstr "" -#: config/tc-i386.c:1208 +#: config/tc-i386.c:1207 #, c-format msgid "`%s' is not supported on `%s'" msgstr "" -#: config/tc-i386.c:1213 +#: config/tc-i386.c:1212 msgid "use .code16 to ensure correct addressing mode" msgstr "" -#: config/tc-i386.c:1221 +#: config/tc-i386.c:1220 #, c-format msgid "expecting string instruction after `%s'" msgstr "" -#: config/tc-i386.c:1244 +#: config/tc-i386.c:1243 #, c-format msgid "invalid character %s before operand %d" msgstr "" -#: config/tc-i386.c:1258 +#: config/tc-i386.c:1257 #, c-format msgid "unbalanced parenthesis in operand %d." msgstr "" -#: config/tc-i386.c:1261 +#: config/tc-i386.c:1260 #, c-format msgid "unbalanced brackets in operand %d." msgstr "" -#: config/tc-i386.c:1270 +#: config/tc-i386.c:1269 #, c-format msgid "invalid character %s in operand %d" msgstr "" -#: config/tc-i386.c:1297 +#: config/tc-i386.c:1296 #, c-format msgid "spurious operands; (%d operands/instruction max)" msgstr "" -#: config/tc-i386.c:1318 +#: config/tc-i386.c:1317 msgid "expecting operand after ','; got nothing" msgstr "" -#: config/tc-i386.c:1323 +#: config/tc-i386.c:1322 msgid "expecting operand before ','; got nothing" msgstr "" #. we found no match -#: config/tc-i386.c:1563 +#: config/tc-i386.c:1587 #, c-format msgid "suffix or operands invalid for `%s'" msgstr "" -#: config/tc-i386.c:1574 +#: config/tc-i386.c:1598 #, c-format msgid "indirect %s without `*'" msgstr "" #. Warn them that a data or address size prefix doesn't #. affect assembly of the next line of code. -#: config/tc-i386.c:1582 +#: config/tc-i386.c:1606 #, c-format msgid "stand-alone `%s' prefix" msgstr "" -#: config/tc-i386.c:1618 config/tc-i386.c:1633 +#: config/tc-i386.c:1642 config/tc-i386.c:1657 msgid "`%s' operand %d must use `%%es' segment" msgstr "" -#: config/tc-i386.c:1701 config/tc-i386.c:1743 config/tc-i386.c:1771 +#: config/tc-i386.c:1725 config/tc-i386.c:1767 config/tc-i386.c:1795 msgid "using `%%%s' instead of `%%%s' due to `%c' suffix" msgstr "" -#: config/tc-i386.c:1714 config/tc-i386.c:1731 config/tc-i386.c:1759 +#: config/tc-i386.c:1738 config/tc-i386.c:1755 config/tc-i386.c:1783 msgid "`%%%s' not allowed with `%s%c'" msgstr "" -#: config/tc-i386.c:1804 config/tc-i386.c:1824 +#: config/tc-i386.c:1828 config/tc-i386.c:1848 msgid "no instruction mnemonic suffix given; can't determine immediate size" msgstr "" -#: config/tc-i386.c:1849 +#: config/tc-i386.c:1873 msgid "" "no instruction mnemonic suffix given and no register operands; can't size " "instruction" msgstr "" #. reversed arguments on faddp, fsubp, etc. -#: config/tc-i386.c:1951 +#: config/tc-i386.c:1975 msgid "translating to `%s %%%s,%%%s'" msgstr "" #. extraneous `l' suffix on fp insn -#: config/tc-i386.c:1958 +#: config/tc-i386.c:1982 msgid "translating to `%s %%%s'" msgstr "" -#: config/tc-i386.c:2173 +#: config/tc-i386.c:2197 msgid "you can't `pop %%cs'" msgstr "" #. UnixWare fsub no args is alias for fsubp, fadd -> faddp, etc. -#: config/tc-i386.c:2204 +#: config/tc-i386.c:2228 #, c-format msgid "translating to `%sp'" msgstr "" -#: config/tc-i386.c:2253 config/tc-i386.c:2316 config/tc-i386.c:2358 +#: config/tc-i386.c:2277 config/tc-i386.c:2340 config/tc-i386.c:2382 msgid "skipping prefixes on this instruction" msgstr "" -#: config/tc-i386.c:2373 +#: config/tc-i386.c:2397 msgid "16-bit jump out of range" msgstr "" -#: config/tc-i386.c:2382 +#: config/tc-i386.c:2406 #, c-format msgid "can't handle non absolute segment in `%s'" msgstr "" -#: config/tc-i386.c:2597 +#: config/tc-i386.c:2621 msgid "only 1 or 2 immediate operands are allowed" msgstr "" -#: config/tc-i386.c:2629 config/tc-i386.c:2850 +#: config/tc-i386.c:2653 config/tc-i386.c:2874 msgid "GOT relocations not supported in 16 bit mode" msgstr "" -#: config/tc-i386.c:2650 config/tc-i386.c:2871 +#: config/tc-i386.c:2674 config/tc-i386.c:2895 msgid "bad reloc specifier in expression" msgstr "" -#: config/tc-i386.c:2668 config/tc-i386.c:2905 +#: config/tc-i386.c:2692 config/tc-i386.c:2929 #, c-format msgid "ignoring junk `%s' after expression" msgstr "" #. missing or bad expr becomes absolute 0 -#: config/tc-i386.c:2675 +#: config/tc-i386.c:2699 #, c-format msgid "missing or invalid immediate expression `%s' taken as 0" msgstr "" -#: config/tc-i386.c:2702 config/tc-i386.c:2948 +#: config/tc-i386.c:2726 config/tc-i386.c:2959 #, c-format msgid "unimplemented segment %s in operand" msgstr "" -#: config/tc-i386.c:2704 config/tc-i386.c:2950 +#: config/tc-i386.c:2728 config/tc-i386.c:2961 #, c-format msgid "unimplemented segment type %d in operand" msgstr "" -#: config/tc-i386.c:2748 +#: config/tc-i386.c:2772 #, c-format msgid "expecting scale factor of 1, 2, 4, or 8: got `%s'" msgstr "" -#: config/tc-i386.c:2754 +#: config/tc-i386.c:2778 #, c-format msgid "scale factor of %d without an index register" msgstr "" #. missing or bad expr becomes absolute 0 -#: config/tc-i386.c:2916 +#: config/tc-i386.c:2940 #, c-format msgid "missing or invalid displacement expression `%s' taken as 0" msgstr "" -#: config/tc-i386.c:3130 config/tc-i386.c:3136 config/tc-i386.c:3145 +#: config/tc-i386.c:3141 config/tc-i386.c:3147 config/tc-i386.c:3156 #, c-format msgid "bad segment name `%s'" msgstr "" -#: config/tc-i386.c:3203 +#: config/tc-i386.c:3214 #, c-format msgid "`%s' is not a valid base/index expression" msgstr "" -#: config/tc-i386.c:3207 +#: config/tc-i386.c:3218 #, c-format msgid "`%s' is not a valid %s bit base/index expression" msgstr "" -#: config/tc-i386.c:3228 config/tc-i386.c:3582 +#: config/tc-i386.c:3239 config/tc-i386.c:3593 #, c-format msgid "too many memory references for `%s'" msgstr "" -#: config/tc-i386.c:3314 config/tc-i386.c:3449 config/tc-i386.c:3552 -#: config/tc-i386.c:3667 config/tc-i386.c:3703 +#: config/tc-i386.c:3325 config/tc-i386.c:3460 config/tc-i386.c:3563 +#: config/tc-i386.c:3678 config/tc-i386.c:3714 #, c-format msgid "bad register name `%s'" msgstr "" -#: config/tc-i386.c:3528 +#: config/tc-i386.c:3539 #, c-format msgid "bad memory operand `%s'" msgstr "" -#: config/tc-i386.c:3543 +#: config/tc-i386.c:3554 #, c-format msgid "junk `%s' after register" msgstr "" -#: config/tc-i386.c:3560 +#: config/tc-i386.c:3571 msgid "immediate operand illegal with absolute jump" msgstr "" -#: config/tc-i386.c:3660 +#: config/tc-i386.c:3671 #, c-format msgid "expecting `,' or `)' after index register in `%s'" msgstr "" -#: config/tc-i386.c:3682 +#: config/tc-i386.c:3693 #, c-format msgid "expecting `)' after scale factor in `%s'" msgstr "" -#: config/tc-i386.c:3689 +#: config/tc-i386.c:3700 #, c-format msgid "expecting index register or scale factor after `,'; got '%c'" msgstr "" -#: config/tc-i386.c:3696 +#: config/tc-i386.c:3707 #, c-format msgid "expecting `,' or `)' after base register in `%s'" msgstr "" #. it's not a memory operand; argh! -#: config/tc-i386.c:3736 +#: config/tc-i386.c:3747 #, c-format msgid "invalid char %s beginning operand %d `%s'" msgstr "" -#: config/tc-i386.c:4169 +#: config/tc-i386.c:4154 msgid "Bad call to md_atof ()" msgstr "" -#: config/tc-i386.c:4314 +#: config/tc-i386.c:4299 msgid "" " -Q ignored\n" " -V print assembler version number\n" @@ -3318,15 +3318,15 @@ msgid "" " -s ignored\n" msgstr "" -#: config/tc-i386.c:4321 +#: config/tc-i386.c:4306 msgid " -q quieten some warnings\n" msgstr "" -#: config/tc-i386.c:4371 +#: config/tc-i386.c:4356 msgid "GOT already in symbol table" msgstr "" -#: config/tc-i386.c:4520 +#: config/tc-i386.c:4505 #, c-format msgid "cannot represent relocation type %s" msgstr "" @@ -3684,11 +3684,11 @@ msgstr "" msgid "Unrecognized dependency specifier %d\n" msgstr "" -#: config/tc-ia64.c:8196 +#: config/tc-ia64.c:8203 msgid "Only the first path encountering the conflict is reported" msgstr "" -#: config/tc-ia64.c:8199 +#: config/tc-ia64.c:8206 msgid "This is the location of the conflicting usage" msgstr "" @@ -6525,6 +6525,452 @@ msgstr "" msgid "Barf, bad mode %x\n" msgstr "" +#: config/tc-tic54x.c:79 +msgid "C54x-specific command line options:\n" +msgstr "" + +#: config/tc-tic54x.c:80 +msgid "-mfar-mode | -mf Use extended addressing\n" +msgstr "" + +#: config/tc-tic54x.c:81 +msgid "-mcpu= Specify the CPU version\n" +msgstr "" + +#. fprintf (stream, _("-mcoff-version={0|1|2} Select COFF version\n")); +#: config/tc-tic54x.c:83 +msgid "-merrors-to-file \n" +msgstr "" + +#: config/tc-tic54x.c:84 +msgid "-me Redirect errors to a file\n" +msgstr "" + +#: config/tc-tic54x.c:329 +msgid "Comma and symbol expected for '.asg STRING, SYMBOL'" +msgstr "" + +#: config/tc-tic54x.c:383 +msgid "Unterminated string after absolute expression" +msgstr "" + +#: config/tc-tic54x.c:391 +msgid "Comma and symbol expected for '.eval EXPR, SYMBOL'" +msgstr "" + +#: config/tc-tic54x.c:403 +msgid "symbols assigned with .eval must begin with a letter" +msgstr "" + +#: config/tc-tic54x.c:657 +msgid "Offset on nested structures is ignored" +msgstr "" + +#: config/tc-tic54x.c:706 +#, c-format +msgid ".end%s without preceding .%s" +msgstr "" + +#: config/tc-tic54x.c:773 +#, c-format +msgid "Unrecognized struct/union tag '%s'" +msgstr "" + +#: config/tc-tic54x.c:775 +msgid ".tag requires a structure tag" +msgstr "" + +#: config/tc-tic54x.c:781 +msgid "Label required for .tag" +msgstr "" + +#: config/tc-tic54x.c:798 +#, c-format +msgid ".tag target '%s' undefined" +msgstr "" + +#: config/tc-tic54x.c:860 +#, c-format +msgid ".field count '%d' out of range (1 <= X <= 32)" +msgstr "" + +#: config/tc-tic54x.c:888 +#, c-format +msgid "Unrecognized field type '%c'" +msgstr "" + +#. Disallow .byte with a non constant expression that will +#. require relocation. +#: config/tc-tic54x.c:1022 +msgid "Relocatable values require at least WORD storage" +msgstr "" + +#: config/tc-tic54x.c:1084 +msgid "Use of .def/.ref is deprecated. Use .global instead" +msgstr "" + +#: config/tc-tic54x.c:1275 +msgid ".space/.bes repeat count is negative, ignored" +msgstr "" + +#: config/tc-tic54x.c:1280 +msgid ".space/.bes repeat count is zero, ignored" +msgstr "" + +#: config/tc-tic54x.c:1358 +msgid "Missing size argument" +msgstr "" + +#: config/tc-tic54x.c:1493 +msgid "CPU version has already been set" +msgstr "" + +#: config/tc-tic54x.c:1497 +#, c-format +msgid "Unrecognized version '%s'" +msgstr "" + +#: config/tc-tic54x.c:1503 +msgid "Changing of CPU version on the fly not supported" +msgstr "" + +#: config/tc-tic54x.c:1637 +msgid "p2align not supported on this target" +msgstr "" + +#: config/tc-tic54x.c:1649 +msgid "Argument to .even ignored" +msgstr "" + +#: config/tc-tic54x.c:1696 +msgid "Invalid field size, must be from 1 to 32" +msgstr "" + +#: config/tc-tic54x.c:1708 +msgid "field size must be 16 when value is relocatable" +msgstr "" + +#: config/tc-tic54x.c:1722 +msgid "field value truncated" +msgstr "" + +#: config/tc-tic54x.c:1828 config/tc-tic54x.c:2144 +#, c-format +msgid "Unrecognized section '%s'" +msgstr "" + +#: config/tc-tic54x.c:1837 +msgid "Current section is unitialized, section name required for .clink" +msgstr "" + +#: config/tc-tic54x.c:2049 +msgid "ENDLOOP without corresponding LOOP" +msgstr "" + +#: config/tc-tic54x.c:2096 +msgid "Mixing of normal and extended addressing not supported" +msgstr "" + +#: config/tc-tic54x.c:2102 +msgid "Extended addressing not supported on the specified CPU" +msgstr "" + +#: config/tc-tic54x.c:2150 +msgid ".sblock may be used for initialized sections only" +msgstr "" + +#: config/tc-tic54x.c:2181 +msgid "Symbol missing for .set/.equ" +msgstr "" + +#: config/tc-tic54x.c:2238 +msgid ".var may only be used within a macro definition" +msgstr "" + +#: config/tc-tic54x.c:2246 +msgid "Substitution symbols must begin with a letter" +msgstr "" + +#: config/tc-tic54x.c:2337 +#, c-format +msgid "Can't open macro library file '%s' for reading." +msgstr "" + +#: config/tc-tic54x.c:2344 +#, c-format +msgid "File '%s' not in macro archive format" +msgstr "" + +#: config/tc-tic54x.c:2493 +#, c-format +msgid "Bad COFF version '%s'" +msgstr "" + +#: config/tc-tic54x.c:2502 +#, c-format +msgid "Bad CPU version '%s'" +msgstr "" + +#: config/tc-tic54x.c:2514 config/tc-tic54x.c:2517 +#, c-format +msgid "Can't redirect stderr to the file '%s'" +msgstr "" + +#: config/tc-tic54x.c:2647 +#, c-format +msgid "Undefined substitution symbol '%s'" +msgstr "" + +#: config/tc-tic54x.c:3293 +msgid "Badly formed address expression" +msgstr "" + +#: config/tc-tic54x.c:3552 +#, c-format +msgid "Invalid dmad syntax '%s'" +msgstr "" + +#: config/tc-tic54x.c:3668 +msgid "Address mode *+ARx is write-only. Results of reading are undefined." +msgstr "" + +#: config/tc-tic54x.c:3688 +#, c-format +msgid "Unrecognized indirect address format \"%s\"" +msgstr "" + +#: config/tc-tic54x.c:3725 +#, c-format +msgid "Operand '%s' out of range (%d <= x <= %d)" +msgstr "" + +#: config/tc-tic54x.c:3745 +msgid "Error in relocation handling" +msgstr "" + +#: config/tc-tic54x.c:3766 config/tc-tic54x.c:3831 config/tc-tic54x.c:3861 +#, c-format +msgid "Unrecognized condition code \"%s\"" +msgstr "" + +#: config/tc-tic54x.c:3784 +#, c-format +msgid "Condition \"%s\" does not match preceding group" +msgstr "" + +#: config/tc-tic54x.c:3792 +#, c-format +msgid "" +"Condition \"%s\" uses a different accumulator from a preceding condition" +msgstr "" + +#: config/tc-tic54x.c:3799 +msgid "Only one comparison conditional allowed" +msgstr "" + +#: config/tc-tic54x.c:3804 +msgid "Only one overflow conditional allowed" +msgstr "" + +#: config/tc-tic54x.c:3812 +#, c-format +msgid "Duplicate %s conditional" +msgstr "" + +#: config/tc-tic54x.c:3846 +msgid "Invalid auxiliary register (use AR0-AR7)" +msgstr "" + +#: config/tc-tic54x.c:3881 +msgid "lk addressing modes are invalid for memory-mapped register addressing" +msgstr "" + +#: config/tc-tic54x.c:3889 +msgid "" +"Address mode *+ARx is not allowed in memory-mapped register addressing. " +"Resulting behavior is undefined." +msgstr "" + +#: config/tc-tic54x.c:3915 +msgid "" +"Destination accumulator for each part of this parallel instruction must be " +"different" +msgstr "" + +#: config/tc-tic54x.c:3962 +#, c-format +msgid "Memory mapped register \"%s\" out of range" +msgstr "" + +#: config/tc-tic54x.c:4001 +msgid "Invalid operand (use 1, 2, or 3)" +msgstr "" + +#: config/tc-tic54x.c:4026 +msgid "A status register or status bit name is required" +msgstr "" + +#: config/tc-tic54x.c:4036 +#, c-format +msgid "Unrecognized status bit \"%s\"" +msgstr "" + +#: config/tc-tic54x.c:4058 +#, c-format +msgid "Invalid status register \"%s\"" +msgstr "" + +#: config/tc-tic54x.c:4070 +#, c-format +msgid "Operand \"%s\" out of range (use 1 or 2)" +msgstr "" + +#: config/tc-tic54x.c:4268 +#, c-format +msgid "Unrecognized instruction \"%s\"" +msgstr "" + +#: config/tc-tic54x.c:4297 +#, c-format +msgid "Unrecognized operand list '%s' for instruction '%s'" +msgstr "" + +#: config/tc-tic54x.c:4328 +#, c-format +msgid "Unrecognized parallel instruction \"%s\"" +msgstr "" + +#: config/tc-tic54x.c:4379 +#, c-format +msgid "Invalid operand (s) for parallel instruction \"%s\"" +msgstr "" + +#: config/tc-tic54x.c:4382 +#, c-format +msgid "Unrecognized parallel instruction combination \"%s || %s\"" +msgstr "" + +#: config/tc-tic54x.c:4608 +#, c-format +msgid "%s symbol recursion stopped at second appearance of '%s'" +msgstr "" + +#: config/tc-tic54x.c:4647 +msgid "Unrecognized substitution symbol function" +msgstr "" + +#: config/tc-tic54x.c:4652 +msgid "Missing '(' after substitution symbol function" +msgstr "" + +#: config/tc-tic54x.c:4666 +msgid "Expecting second argument" +msgstr "" + +#: config/tc-tic54x.c:4679 config/tc-tic54x.c:4728 +msgid "Extra junk in function call, expecting ')'" +msgstr "" + +#: config/tc-tic54x.c:4704 +msgid "Function expects two arguments" +msgstr "" + +#: config/tc-tic54x.c:4717 +msgid "Expecting character constant argument" +msgstr "" + +#: config/tc-tic54x.c:4723 +msgid "Both arguments must be substitution symbols" +msgstr "" + +#: config/tc-tic54x.c:4777 +#, c-format +msgid "Invalid subscript (use 1 to %d)" +msgstr "" + +#: config/tc-tic54x.c:4787 +#, c-format +msgid "Invalid length (use 0 to %d" +msgstr "" + +#: config/tc-tic54x.c:4797 +msgid "Missing ')' in subscripted substitution symbol expression" +msgstr "" + +#: config/tc-tic54x.c:4817 +msgid "Missing forced substitution terminator ':'" +msgstr "" + +#: config/tc-tic54x.c:4993 +#, c-format +msgid "" +"Instruction does not fit in available delay slots (%d-word insn, %d slots " +"left)" +msgstr "" + +#: config/tc-tic54x.c:5034 +#, c-format +msgid "Unrecognized parallel instruction '%s'" +msgstr "" + +#: config/tc-tic54x.c:5046 +#, c-format +msgid "Instruction '%s' requires an LP cpu version" +msgstr "" + +#: config/tc-tic54x.c:5053 +#, c-format +msgid "Instruction '%s' requires far mode addressing" +msgstr "" + +#: config/tc-tic54x.c:5065 +#, c-format +msgid "" +"Instruction does not fit in available delay slots (%d-word insn, %d slots " +"left). Resulting behavior is undefined." +msgstr "" + +#: config/tc-tic54x.c:5075 +msgid "" +"Instructions which cause PC discontinuity are not allowed in a delay slot. " +"Resulting behavior is undefined." +msgstr "" + +#: config/tc-tic54x.c:5085 +#, c-format +msgid "'%s' is not repeatable. Resulting behavior is undefined." +msgstr "" + +#: config/tc-tic54x.c:5089 +msgid "" +"Instructions using long offset modifiers or absolute addresses are not " +"repeatable. Resulting behavior is undefined." +msgstr "" + +#: config/tc-tic54x.c:5273 +#, c-format +msgid "Unsupported relocation size %d" +msgstr "" + +#: config/tc-tic54x.c:5422 +msgid "non-absolute value used with .space/.bes" +msgstr "" + +#: config/tc-tic54x.c:5426 +#, c-format +msgid "negative value ignored in %s" +msgstr "" + +#: config/tc-tic54x.c:5513 +#, c-format +msgid "attempt to .space/.bes backwards? (%ld)" +msgstr "" + +#: config/tc-tic54x.c:5546 +#, c-format +msgid "Invalid label '%s'" +msgstr "" + #: config/tc-tic80.c:90 msgid "Relaxation is a luxury we can't afford" msgstr "" @@ -6946,84 +7392,84 @@ msgstr "" msgid "syntax error after