From: Glenn Bergmans Date: Thu, 17 Dec 2015 11:49:51 +0000 (+0000) Subject: arm: DT autogeneration - autogenerate RealView Platform devices X-Git-Tag: v19.0.0.0~2347 X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=199ff5e67770592ee9cbb941db8e8ea740dc1084;p=gem5.git arm: DT autogeneration - autogenerate RealView Platform devices Implements the Device Tree generating code for devices required by the RealView VExpress_GEM5_V1 platform Change-Id: I14244b2f3c028cbddba3c23ce7433fe3b301a0e8 Reviewed-by: Curtis Dunham Reviewed-by: Andreas Sandberg Reviewed-on: https://gem5-review.googlesource.com/5965 Maintainer: Andreas Sandberg --- diff --git a/src/dev/Device.py b/src/dev/Device.py index d51d7bd8d..e4656078d 100644 --- a/src/dev/Device.py +++ b/src/dev/Device.py @@ -1,3 +1,15 @@ +# Copyright (c) 2012-2016 ARM Limited +# All rights reserved. +# +# The license below extends only to copyright in the software and shall +# not be construed as granting a license to any other intellectual +# property including but not limited to intellectual property relating +# to a hardware implementation of the functionality of the software +# licensed hereunder. You may use the software subject to the license +# terms below provided that you ensure that this notice is replicated +# unmodified and in its entirety in all distributions of the software, +# modified or unmodified, in source code or in binary form. +# # Copyright (c) 2005-2007 The Regents of The University of Michigan # All rights reserved. # @@ -25,9 +37,11 @@ # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. # # Authors: Nathan Binkert +# Glenn Bergmans from m5.params import * from m5.proxy import * +from m5.util.fdthelper import * from MemObject import MemObject class PioDevice(MemObject): @@ -37,6 +51,25 @@ class PioDevice(MemObject): pio = SlavePort("Programmed I/O port") system = Param.System(Parent.any, "System this device is part of") + def generateBasicPioDeviceNode(self, state, name, pio_addr, + size, interrupts = None): + node = FdtNode("%s@%x" % (name, long(pio_addr))) + node.append(FdtPropertyWords("reg", + state.addrCells(pio_addr) + + state.sizeCells(size) )) + + if interrupts: + if any([i < 32 for i in interrupts]): + raise(("Interrupt number smaller than 32 "+ + " in PioDevice %s") % name) + + # subtracting 32 because Linux assumes that SPIs start at 0, while + # gem5 uses the internal GIC numbering (SPIs start at 32) + node.append(FdtPropertyWords("interrupts", sum( + [[0, i - 32, 4] for i in interrupts], []) )) + + return node + class BasicPioDevice(PioDevice): type = 'BasicPioDevice' cxx_header = "dev/io_device.hh" diff --git a/src/dev/arm/RealView.py b/src/dev/arm/RealView.py index cd7772f32..760c3c709 100644 --- a/src/dev/arm/RealView.py +++ b/src/dev/arm/RealView.py @@ -39,9 +39,12 @@ # Authors: Ali Saidi # Gabe Black # William Wang +# Glenn Bergmans +from m5.defines import buildEnv from m5.params import * from m5.proxy import * +from m5.util.fdthelper import * from ClockDomain import ClockDomain from VoltageDomain import VoltageDomain from Device import BasicPioDevice, PioDevice, IsaFake, BadAddr, DmaDevice @@ -58,6 +61,7 @@ from ClockedObject import ClockedObject from ClockDomain import SrcClockDomain from SubSystem import SubSystem from Graphics import ImageFormat +from ClockedObject import ClockedObject # Platforms with KVM support should generally use in-kernel GIC # emulation. Use a GIC model that automatically switches between @@ -121,6 +125,18 @@ class RealViewCtrl(BasicPioDevice): proc_id1 = Param.UInt32(0x0C000222, "Processor ID, SYS_PROCID1") idreg = Param.UInt32(0x00000000, "ID Register, SYS_ID") + def generateDeviceTree(self, state): + node = FdtNode("sysreg@%x" % long(self.pio_addr)) + node.appendCompatible("arm,vexpress-sysreg") + node.append(FdtPropertyWords("reg", + state.addrCells(self.pio_addr) + + state.sizeCells(0x1000) )) + node.append(FdtProperty("gpio-controller")) + node.append(FdtPropertyWords("#gpio-cells", [2])) + node.appendPhandle(self) + + yield node + class RealViewOsc(ClockDomain): type = 'RealViewOsc' cxx_header = "dev/arm/rv_ctrl.hh" @@ -143,6 +159,20 @@ class RealViewOsc(ClockDomain): freq = Param.Clock("Default frequency") + def generateDeviceTree(self, state): + phandle = state.phandle(self) + node = FdtNode("osc@" + format(long(phandle), 'x')) + node.appendCompatible("arm,vexpress-osc") + node.append(FdtPropertyWords("arm,vexpress-sysreg,func", + [0x1, int(self.device)])) + node.append(FdtPropertyWords("#clock-cells", [0])) + freq = int(1.0/self.freq.value) # Values are stored as a clock period + node.append(FdtPropertyWords("freq-range", [freq, freq])) + node.append(FdtPropertyStrings("clock-output-names", + ["oscclk" + str(phandle)])) + node.appendPhandle(self) + yield node + class RealViewTemperatureSensor(SimObject): type = 'RealViewTemperatureSensor' cxx_header = "dev/arm/rv_ctrl.hh" @@ -181,6 +211,20 @@ Express (V2M-P1) motherboard. See ARM DUI 0447J for details. # See Table 4.19 in ARM DUI 0447J (Motherboard Express uATX TRM). temp_crtl = Temperature(device=0) + def generateDeviceTree(self, state): + node = FdtNode("mcc") + node.appendCompatible("arm,vexpress,config-bus") + node.append(FdtPropertyWords("arm,vexpress,site", [0])) + + for obj in self._children.values(): + if issubclass(type(obj), SimObject): + node.append(obj.generateDeviceTree(state)) + + io_phandle = state.phandle(self.osc_mcc.parent.unproxy(self)) + node.append(FdtPropertyWords("arm,vexpress,config-bridge", io_phandle)) + + yield node + class CoreTile2A15DCC(SubSystem): """ARM CoreTile Express A15x2 Daughterboard Configuration Controller @@ -200,6 +244,19 @@ ARM DUI 0604E for details. osc_sys = Osc(device=7, freq="60MHz") osc_ddr = Osc(device=8, freq="40MHz") + def generateDeviceTree(self, state): + node = FdtNode("dcc") + node.appendCompatible("arm,vexpress,config-bus") + + for obj in self._children.values(): + if isinstance(obj, SimObject): + node.append(obj.generateDeviceTree(state)) + + io_phandle = state.phandle(self.osc_cpu.parent.unproxy(self)) + node.append(FdtPropertyWords("arm,vexpress,config-bridge", io_phandle)) + + yield node + class VGic(PioDevice): type = 'VGic' cxx_header = "dev/arm/vgic.hh" @@ -211,6 +268,34 @@ class VGic(PioDevice): # The number of list registers is not currently configurable at runtime. ppint = Param.UInt32("HV maintenance interrupt number") + def generateDeviceTree(self, state): + gic = self.gic.unproxy(self) + + node = FdtNode("interrupt-controller") + node.appendCompatible(["gem5,gic", "arm,cortex-a15-gic", + "arm,cortex-a9-gic"]) + node.append(FdtPropertyWords("#interrupt-cells", [3])) + node.append(FdtPropertyWords("#address-cells", [0])) + node.append(FdtProperty("interrupt-controller")) + + regs = ( + state.addrCells(gic.dist_addr) + + state.sizeCells(0x1000) + + state.addrCells(gic.cpu_addr) + + state.sizeCells(0x1000) + + state.addrCells(self.hv_addr) + + state.sizeCells(0x2000) + + state.addrCells(self.vcpu_addr) + + state.sizeCells(0x2000) ) + + node.append(FdtPropertyWords("reg", regs)) + node.append(FdtPropertyWords("interrupts", + [1, int(self.ppint)-16, 0xf04])) + + node.appendPhandle(gic) + + yield node + class AmbaFake(AmbaPioDevice): type = 'AmbaFake' cxx_header = "dev/arm/amba_fake.hh" @@ -225,6 +310,20 @@ class Pl011(Uart): end_on_eot = Param.Bool(False, "End the simulation when a EOT is received on the UART") int_delay = Param.Latency("100ns", "Time between action and interrupt generation by UART") + def generateDeviceTree(self, state): + node = self.generateBasicPioDeviceNode(state, 'uart', self.pio_addr, + 0x1000, [int(self.int_num)]) + node.appendCompatible(["arm,pl011", "arm,primecell"]) + + # Hardcoded reference to the realview platform clocks, because the + # clk_domain can only store one clock (i.e. it is not a VectorParam) + realview = self._parent.unproxy(self) + node.append(FdtPropertyWords("clocks", + [state.phandle(realview.mcc.osc_peripheral), + state.phandle(realview.dcc.osc_smb)])) + node.append(FdtPropertyStrings("clock-names", ["uartclk", "apb_pclk"])) + yield node + class Sp804(AmbaPioDevice): type = 'Sp804' cxx_header = "dev/arm/timer_sp804.hh" @@ -258,6 +357,20 @@ class GenericTimer(ClockedObject): int_phys = Param.UInt32("Physical timer interrupt number") int_virt = Param.UInt32("Virtual timer interrupt number") + def generateDeviceTree(self, state): + node = FdtNode("timer") + + node.appendCompatible(["arm,cortex-a15-timer", + "arm,armv7-timer", + "arm,armv8-timer"]) + node.append(FdtPropertyWords("interrupts", + [1, int(self.int_phys) - 16, 0xf08, + 1, int(self.int_virt) - 16, 0xf08])) + clock = state.phandle(self.clk_domain.unproxy(self)) + node.append(FdtPropertyWords("clocks", clock)) + + yield node + class GenericTimerMem(PioDevice): type = 'GenericTimerMem' cxx_header = "dev/arm/generic_timer.hh" @@ -274,6 +387,16 @@ class PL031(AmbaIntDevice): time = Param.Time('01/01/2009', "System time to use ('Now' for actual time)") amba_id = 0x00341031 + def generateDeviceTree(self, state): + node = self.generateBasicPioDeviceNode(state, 'rtc', self.pio_addr, + 0x1000, [int(self.int_num)]) + + node.appendCompatible(["arm,pl031", "arm,primecell"]) + clock = state.phandle(self.clk_domain.unproxy(self)) + node.append(FdtPropertyWords("clocks", clock)) + + yield node + class Pl050(AmbaIntDevice): type = 'Pl050' cxx_header = "dev/arm/kmi.hh" @@ -282,6 +405,16 @@ class Pl050(AmbaIntDevice): int_delay = '1us' amba_id = 0x00141050 + def generateDeviceTree(self, state): + node = self.generateBasicPioDeviceNode(state, 'kmi', self.pio_addr, + 0x1000, [int(self.int_num)]) + + node.appendCompatible(["arm,pl050", "arm,primecell"]) + clock = state.phandle(self.clk_domain.unproxy(self)) + node.append(FdtPropertyWords("clocks", clock)) + + yield node + class Pl111(AmbaDmaDevice): type = 'Pl111' cxx_header = "dev/arm/pl111.hh" @@ -312,6 +445,23 @@ class HDLcd(AmbaDmaDevice): virt_refresh_rate = Param.Frequency("20Hz", "Frame refresh rate " "in KVM mode") + def generateDeviceTree(self, state): + # Interrupt number is hardcoded; it is not a property of this class + node = self.generateBasicPioDeviceNode(state, 'hdlcd', + self.pio_addr, 0x1000, [63]) + + node.appendCompatible(["arm,hdlcd"]) + node.append(FdtPropertyWords("clocks", state.phandle(self.pxl_clk))) + node.append(FdtPropertyStrings("clock-names", ["pxlclk"])) + + # This driver is disabled by default since the required DT nodes + # haven't been standardized yet. To use it, override this status to + # "ok" and add the display configuration nodes required by the driver. + # See the driver for more information. + node.append(FdtPropertyStrings("status", ["disabled"])) + + yield node + class RealView(Platform): type = 'RealView' cxx_header = "dev/arm/realview.hh" @@ -372,6 +522,22 @@ class RealView(Platform): cur_sys.atags_addr = 0x100 cur_sys.load_offset = 0 + def generateDeviceTree(self, state): + node = FdtNode("/") # Things in this module need to end up in the root + node.append(FdtPropertyWords("interrupt-parent", + state.phandle(self.gic))) + + for device in [getattr(self, c) for c in self._children]: + if issubclass(type(device), SimObject): + subnode = device.generateDeviceTree(state) + node.append(subnode) + + yield node + + def annotateCpuDeviceNode(self, cpu, state): + cpu.append(FdtPropertyStrings("enable-method", "spin-table")) + cpu.append(FdtPropertyWords("cpu-release-addr", \ + state.addrCells(0x8000fff8))) # Reference for memory map and interrupt number # RealView Platform Baseboard Explore for Cortex-A9 User Guide(ARM DUI 0440A) @@ -897,6 +1063,9 @@ Interrupts: ] ### Off-chip devices ### + clock24MHz = SrcClockDomain(clock="24MHz", + voltage_domain=VoltageDomain(voltage="3.3V")) + uart0 = Pl011(pio_addr=0x1c090000, int_num=37) kmi0 = Pl050(pio_addr=0x1c060000, int_num=44) @@ -917,10 +1086,12 @@ Interrupts: return [ self.realview_io, self.uart0, - self.kmi0, self.kmi1, + self.kmi0, + self.kmi1, self.rtc, self.pci_host, self.energy_ctrl, + self.clock24MHz, ] def attachPciDevice(self, device, *args, **kwargs): @@ -940,3 +1111,17 @@ Interrupts: # loader, but this is the only place we can configure the # system. cur_sys.m5ops_base = 0x10010000 + + def generateDeviceTree(self, state): + # Generate using standard RealView function + dt = list(super(VExpress_GEM5_V1, self).generateDeviceTree(state)) + if len(dt) > 1: + raise Exception("System returned too many DT nodes") + node = dt[0] + + node.appendCompatible(["arm,vexpress"]) + node.append(FdtPropertyStrings("model", ["V2P-CA15"])) + node.append(FdtPropertyWords("arm,hbi", [0x0])) + node.append(FdtPropertyWords("arm,vexpress,site", [0xf])) + + yield node