From: Luke Kenneth Casson Leighton Date: Sat, 28 Jul 2018 09:01:41 +0000 (+0100) Subject: remove defined_parameters.bsv X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=19b7cd503176256a9828ae78ea8ff8d64347c278;p=shakti-core.git remove defined_parameters.bsv --- diff --git a/src/core/defined_parameters.bsv b/src/core/defined_parameters.bsv deleted file mode 100644 index c44bae3..0000000 --- a/src/core/defined_parameters.bsv +++ /dev/null @@ -1,485 +0,0 @@ -`define RegFileSize 32 // describes the size of ht register file in the processor. -`ifdef spfpu - `define FLEN 32 -`endif -`ifdef dpfpu - `define FLEN 64 -`endif -//`define fpu_hierarchical //Define this if you want hierarchical modules in verilog - -//`define MMU -`define PRFDEPTH 6 -`define USERSPACE 0 -`ifdef RV64 - `define Burst_length_bits 8 - `define byte_offset 2 - `define Reg_width 64 // the register data width of the processor. - `define ADDR 64 // the address width - `define DCACHE_ADDR 64 - `define DCACHE_BLOCK_SIZE 4 - `define DCACHE_WORD_SIZE 8 -/////////////////////////////MMU parameters/////////////////////////////////// -`define VADDR 39 -`define PADDR 32 -`define OFFSET 12 -`define ASID 8 -/////////////////////////////////////////////////////////////////////////////// -/////////////////////////////////////////////////////////////////////////////// - // TLM2 Request Response definitions for Processor to Bus connection - `define TLM_PRM_CPU_REQ 4, 64, 64, 5, Bit #(0) - `define TLM_PRM_CPU_RSP 4, 64, 64, 5, Bit #(0) - - // TLM2 Request Response definitions for Memory to Bus connection - `define TLM_PRM_MEM_REQ 4, 64, 64, 5, Bit #(0) - `define TLM_PRM_MEM_RSP 4, 64, 64, 5, Bit #(0) - - // Axi Request Response definitions for Processor as a Master - `define AXI_PRM_CPU 4, 64, 64, 5, Bit #(0) // Fabric Interface - `define AXI_XTR_CPU TLMRequest #(`TLM_PRM_CPU_REQ), TLMResponse #(`TLM_PRM_CPU_RSP), `AXI_PRM_CPU // Transactor Interface - - // Axi Request Response definitions for Memory as a Slave - `define AXI_PRM_MEM 4, 64, 64, 5, Bit #(0) // Fabric Interface - `define AXI_XTR_MEM TLMRequest #(`TLM_PRM_MEM_REQ), TLMResponse #(`TLM_PRM_MEM_RSP), `AXI_PRM_MEM // Transactor Interface -/////////////////////////////////////////////////////////////////////////////// -`else - `define byte_offset 1 - `define Reg_width 32 // the register data width of the processor. - `define Addr_width 32 // the address width - `define DCACHE_ADDR 32 - `define DCACHE_BLOCK_SIZE 8 - `define DCACHE_WORD_SIZE 4 -/////////////////////////////////////////////////////////////////////////////// - // TLM2 Request Response definitions for Processor to Bus connection - `define TLM_PRM_CPU_REQ 4, 32, 32, 5, Bit #(0) - `define TLM_PRM_CPU_RSP 4, 32, 32, 5, Bit #(0) - - // TLM2 Request Response definitions for Memory to Bus connection - `define TLM_PRM_MEM_REQ 4, 32, 32, 5, Bit #(0) - `define TLM_PRM_MEM_RSP 4, 32, 32, 5, Bit #(0) - - // Axi Request Response definitions for Processor as a Master - `define AXI_PRM_CPU 4, 32, 32, 5, Bit #(0) // Fabric Interface - `define AXI_XTR_CPU TLMRequest #(`TLM_PRM_CPU_REQ), TLMResponse #(`TLM_PRM_CPU_RSP), `AXI_PRM_CPU // Transactor Interface - - // Axi Request Response definitions for Memory as a Slave - `define AXI_PRM_MEM 4, 32, 32, 5, Bit #(0) // Fabric Interface - `define AXI_XTR_MEM TLMRequest #(`TLM_PRM_MEM_REQ), TLMResponse #(`TLM_PRM_MEM_RSP), `AXI_PRM_MEM // Transactor Interface -/////////////////////////////////////////////////////////////////////////////// -`endif - -`define Loop 1 -`define BAUD_RATE 130 -`ifdef verilog - `define Addr_space 22 //since we are leaving off the lower 2 bits of address(byte addressable memory), we have to -`else - `define Addr_space 30 -`endif -`ifdef simulate - `define BAUD_RATE 5 //130 // -`endif -`define INTERRUPT_PINS 64 - -// Branch_predictor_paramters -/////////////////////////// CACHE RELATED PARAMETERS //////////////////////////////// -`define DCACHE_WAYS 4 -`define DCACHE_SETS 512 - -`define ICACHE_WAYS 4 // way_bits =2 -`define ICACHE_BLOCK_SIZE 8 // word_bits = 3 -`define ICACHE_SETS 512 // set_bits =7 -`define ICACHE_WORD_SIZE 4 // byte_bits=2 -`define ICACHE_TAG_BITS 20 // tag_bits = 52 -`define DCACHE_TAG_BITS 20 // tag_bits = 52 -`define BTB_DEPTH 256 -`define RAS_DEPTH 8 -///////////////////////////////////////////////////////////////////////////////////// -`ifdef RV64 - `define MISA_BITS 'h141129 //'h082C849//// 'h40101121 // A + F + I + M + U - `define MXL_BITS 'h2 -`else - `define MISA_BITS 'h082C849 // 'h40101121 // A + F + I + M + U - `define MXL_BITS 'h1 -`endif -`define MTVEC_DEFAULT 'h00000000 -`define STVEC_DEFAULT 'h00000000 -`define UTVEC_DEFAULT 'h00000000 -/////////////////////////// Register Mapping for Machine Mode Regs ///////////////// -`define MSTATUS 'h00 //'h300 // Machine Status register -`define MISA 'h01 //'h301 // ISA and extensions -`define MEDELEG 'h02 //'h302 // Machine exception delegation -`define MIDELEG 'h03 //'h303 // Machine interrupt delegation -`define MIE 'h04 //'h304 // Machine interrupt enable -`define MTVEC 'h05 //'h305 // Machine trap-handler base address -`define MCOUNTEREN 'h06 //'h306 // Machine counter setup register -`define MHPMEVENTSTART 'h23 //'h323 // statr of event selectors -`define MHPMEVENTEND 'h26 //'h326 // end of event selectors -`define MSCRATCH 'h40 //'h340 // Scratch rgister for machine trap hanglers -`define MEPC 'h41 //'h341 // Machine exception program counter -`define MCAUSE 'h42 //'h342 // Machine trap cause -`define MTVAL 'h43 //'h343 // Machine bad address -`define MIP 'h44 //'h344 // Machine interrupt pending -`define MPOWERCONTROL 'h45 //'h345 // 2 bits to control the power switches. -`define PMPCFG0 'hA0 //'h3A0 // -`ifndef RV64 - `define PMPCFG1 'hA1 //'h3A1 // Physical Memory Protection Configuration Registers -`endif -`define PMPCFG2 'hA2 //'h3A2 // Physical Memory Protection Configuration Registers -`ifndef RV64 - `define PMPCFG3 'hA3 //'h3A3 // Physical Memory Protection Configuration Registers -`endif -`define PMPADDRSTART 'hB0 //PMP Address array start -`define PMPADDREND 'hB7 //PMP Address array end -`define MCYCLE 'h00 //'hB00 // Machine cycle counter -`define MTIME 'h01 //'hB01 // mtime register (Non-standard r/w) -`define MINSTRET 'h02 //'hB02 // Machine instructions retired. -`define MHPMCOUNTSTART 'h03 //'hB03 // start address for performance counters -`define MHPMCOUNTEND 'h05 //'hB05 // end address for performance counters -`define MTIMECMP 'h20 //'hB20 // time compare register (Non-standard r/w) -`define MCYCLEH 'h80 //'hB80 // Upper 32 bits of mcycle -`define MTIMEH 'h81 //'hB81 // mtime hi-register (Non-standard r/w) -`define MINSTRETH 'h82 //'hB82 // Upper 32 bits of minstret. -`define MHPMCOUNTHSTART 'h83 //'hB83 // start address for performance counters higher bits -`define MHPMCOUNTHEND 'h85 //'hB86 // end address for performance counters higher bits -`define MTIMECMPH 'hA0 //'hBA0 // time compare hi-register (Non-standard r/w) -`define MHPMTHRESSTART 'hA3 //'hBA3 // start of counter-thresholds -`define MHPMTHRESEND 'hA5 //'hBA6 // end of counter-thresholds -`define MVENDORID 'h11 //'hF11 // Vendor ID -`define MARCHID 'h12 //'hF12 // Architecture ID -`define MIMPID 'h13 //'hF13 // Implementation ID -`define MHARTID 'h14 //'hF14 // Hardware Thread ID -`define MBOOTSEQ 'h15 //'hF15 // Hardware Thread ID - -`define MHPMTHRESHSTART 'hE0 //'h7E0 // start of counter-thresholds -`define MHPMTHRESHEND 'hE2 //'h7FC // end of counter-thresholds -/////////////////////////// Register Mapping for Supervisor Mode Regs ///////////////// -`define SSTATUS 'h00 //'h100 // Supervisor Status register -`define SEDELEG 'h02 //'h102 // Supervisor exception delegation -`define SIDELEG 'h03 //'h103 // Supervisor interrupt delegation -`define SIE 'h04 //'h104 // Supervisor interrupt enable -`define STVEC 'h05 //'h105 // Supervisor trap-handler base address -`define SCOUNTEREN 'h06 //'h106 // Supervisor counter setup register -`define SSCRATCH 'h40 //'h140 // Scratch register for supervisor trap hanglers -`define SEPC 'h41 //'h141 // Supervisor exception program counter -`define SCAUSE 'h42 //'h142 // Supervisor trap cause -`define STVAL 'h43 //'h143 // Supervisor bad address or illegal instruction -`define SIP 'h44 //'h144 // Supervisor interrupt pending -`define SATP 'h80 //'h180 // Supervisor interrupt pending - -/////////////////////////// Register Mapping for User Mode Regs ///////////////// -`define USTATUS 'h00 //'h000 // User status register -`define FFLAGS 'h01 //'h001 // FP Accrued exceptions -`define FRM 'h02 //'h002 // FP Dynamic rounding mode -`define FCSR 'h03 //'h003 // FP Control and status register -`define UIE 'h04 //'h004 // User interrupt enable register -`define UTVEC 'h05 //'h005 // User trap handler base address -`define USCRATCH 'h40 //'h040 // Scratch register for user trap handlers -`define UEPC 'h41 //'h041 // User exception program counter -`define UCAUSE 'h42 //'h042 // User trap cause -`define UTVAL 'h43 //'h043 // User bad address or illegal instruction -`define UIP 'h44 //'h044 // User interrupt pending -`define UMEMSE 'h45 //'h045 // Machine Memory Structures enable -`define UCYCLE 'h00 //'hC00 // cycle counter for RDCYCLE instruction. -`define UTIME 'h01 //'hC01 // Tiemr for RDTIME instruction -`define UINSTRET 'h02 //'hC02 // Instruction retired counter for RDINSTRET -`define UCYCLEH 'h80 //'hC80 // Upper 32bits of UCYCLE -`define UTIMEH 'h81 //'hC81 // Upper 32bits of UTIME -`define UINSTRETH 'h82 //'hC82 // Upper 32bits of UINSTRET -`define HPMCOUNTSTART 'h03 //'hC03 // start address for performance counters -`define HPMCOUNTEND 'h05 //'hC06 // start address for performance counters -`define HPMCOUNTHSTART 'h83 //'hC83 // start address for performance counters higher bits -`define HPMCOUNTHEND 'h85 //'hC86 // end address for performance counters higher bits - -//////////////////////////////////////////////////////////////////////////////////// -/////////// Debug registers ////////////////////////// -`define DCSR 'hb0 //'h7b0 -`define DPC 'hb1 //'h7b1 -`define DSCRATCH0 'hb2 //'h7b2 -`define DSCRATCH1 'hb3 //'h7b3 -`define DENTRY 'hb4 //'h7b4 // holds the address of the debug entry for self loop -`define TSELECT 'ha0 // 'h7a0 // holds the tselect information -`define TDATA1 'ha1 // 'h7a1 // holds the first trigger data -`define TDATA2 'ha2 // 'h7a2 // holds the first trigger data -//////////////////////////////////////////////////////////////////////////////////// -//////////////////////////////////// funct3 defintions for ISA //////////////////// -`define JALR_f3 'b000 -`define BEQ_f3 'b000 -`define BNE_f3 'b001 -`define BLT_f3 'b100 -`define BGE_f3 'b101 -`define BLTU_f3 'b110 -`define BGEU_f3 'b111 -`define LB_f3 'b000 -`define Lh_f3 'b001 -`define LW_f3 'b010 -`define LBU_f3 'b100 -`define LHU_f3 'b101 -`define LWU_f3 'b110 -`define SB_f3 'b000 -`define SH_f3 'b001 -`define SW_f3 'b010 -`define ADD_SUB_f3 'b000 -`define SLT_SLTI_f3 'b010 -`define SLTU_SLTIU_f3 'b011 -`define XOR_XORI_f3 'b100 -`define OR_ORI_f3 'b110 -`define AND_ANDI_f3 'b111 -`define SLL_SLLI_f3 'b001 -`define SR_SRI_f3 'b101 -`define ECALL_f3 'b000 -`define EBREAK_f3 'b000 -`define CSRRW_f3 'b001 -`define CSRRS_f3 'b010 -`define CSRRC_f3 'b011 -`define CSRRWI_f3 'b101 -`define CSRRSI_f3 'b110 -`define CSRRCI_f3 'b111 -`define MUL_f3 'b000 -`define MULH_f3 'b001 -`define MULHSU_f3 'b010 -`define MULHU_f3 'b011 -`define DIV_f3 'b100 -`define DIVU_f3 'b101 -`define REM_f3 'b110 -`define REMU_f3 'b111 -`define ATOMIC_f3 'b010 -`define FENCE_f3 'b000 -`define FENCEI_f3 'b001 -///////////////////////////////////////////////////////////////////////// -////////////////////// opcode definitions of ISA //////////////////////// -`define LUI_op 'b01101 -`define AUIPC_op 'b00101 -`define JAL_op 'b11011 -`define JALR_op 'b11001 -`define BRANCH_op 'b11000 -`define LOAD_op 'b00000 -`define FLOAD_op 'b00001 -`define STORE_op 'b01000 -`define FSTORE_op 'b01001 -`define IMM_ARITH_op 'b00100 -`define ARITH_op 'b01100 -`ifdef RV64 - `define IMM_ARITHW_op 'b00110 - `define ARITHW_op 'b01110 - `define MULDIVW_op 'b01110 -`endif -`define CSR_op 'b11100 -`define MULDIV_op 'b01100 -`define ATOMIC_op 'b01011 -`define FMADD_op 'b10000 -`define FMSUB_op 'b10001 -`define FNMSUB_op 'b10010 -`define FNMADD_op 'b10011 -`define FLOAT_op 'b10100 -`define FENCE_op 'b00011 -////////////////////////////////////////////////////////////////////////// -/////////////// funct7 deifnition of ISA ///////////////////////////////// -`define SLLI_f7 'b0000000 -`define LOGIC_SHIFT_f7 'b0000000 -`define ARITH_SHIFT_f7 'b0100000 -`define ARITH_f7 'b0000000 -`define SUB_f7 'b0100000 -`define MULDIV_f7 'b0000001 -`define SFENCE_VMA 'b0001001 -`define LR_f5 'b00010 -`define SC_f5 'b00011 -`define AMOSWAP_f5 'b00001 -`define AMOADD_f5 'b00000 -`define AMOXOR_f5 'b00100 -`define AMOAND_f5 'b01100 -`define AMOOR_f5 'b01000 -`define AMOMIN_f5 'b10000 -`define AMOMAX_f5 'b10100 -`define AMOMINU_f5 'b11000 -`define AMOMAXU_f5 'b11100 -`define AMOMIN_f5 'b10000 -`define AMOMAX_f5 'b10100 - - -`define FADD_f5 'b00000 -`define FSUB_f5 'b00001 -`define FMUL_f5 'b00010 -`define FDIV_f5 'b00011 -`define FSQRT_f5 'b01011 -`define FP_OPCODE 'b0100 -`define FCMP_f5 'b10100 -`define FMMAX_f5 'b00101 -`define FCVT_F_I_f5 'b11010 -`define FCVT_I_F_f5 'b11000 -`define FSGNJN_f5 'b00100 -`define FCLASS_f5 'b11100 -`define FCVT_S_D_f5 'b01000 -`define FMV_X_S_f7 'b1110000 -`define FMV_S_X_f7 'b1111000 -`define FMV_X_D_f7 'b1110001 -`define FMV_D_X_f7 'b1111001 - - - - -/////////////////////////////////////////////////////////////////////////// -///////////////// Event Values of Performance Counters //////////////////// -`define PERFMONITORS 64 -`define CYCLECOUNTERS 13 -`define ICACHE_MISS 0 -`define ICACHE_CACHEABLE `ICACHE_MISS+1 -`define ICACHE_LINEREPLACE `ICACHE_CACHEABLE+1 -`define ICACHE_TLBMISS `ICACHE_LINEREPLACE+1 -`define ICACHE_MISALIGNED `ICACHE_TLBMISS+1 -`define ICACHE_PREFETCHMISS `ICACHE_MISALIGNED+1 -`define COND_BRANCH `ICACHE_PREFETCHMISS+1 -`define COND_BRANCH_TAKEN `COND_BRANCH+1 -`define COND_BRANCH_MISPREDICTED `COND_BRANCH_TAKEN+1 -`define TAKEN_BRANCH_MISPREDICTED `COND_BRANCH_MISPREDICTED+1 -`define UNCOND_JUMPS `TAKEN_BRANCH_MISPREDICTED+1 -`define SPFPU_INST `UNCOND_JUMPS+1 -`define DPFPU_INST `SPFPU_INST+1 -`define DCACHE_TLBMISS `DPFPU_INST+1 -`define TOTAL_LOADS `DCACHE_TLBMISS+1 -`define TOTAL_STORES `TOTAL_LOADS+1 -`define TOTAL_ATOMIC `TOTAL_STORES+1 -`define DCACHE_LOAD_MISS `TOTAL_ATOMIC+1 -`define DCACHE_STORE_MISS `DCACHE_LOAD_MISS+1 -`define DCACHE_ATOMIC_MISS `DCACHE_STORE_MISS+1 -`define DCACHE_CACHEABLE_LOAD `DCACHE_ATOMIC_MISS+1 -`define DCACHE_CACHEABLE_STORE `DCACHE_CACHEABLE_LOAD+1 -`define DCACHE_CACHEABLE_ATOMIC `DCACHE_CACHEABLE_STORE+1 -`define DCACHE_WRITEBACKS `DCACHE_CACHEABLE_ATOMIC+1 -`define DCACHE_LINEREPLACE `DCACHE_WRITEBACKS+1 -`define DCACHE_MISALIGNED `DCACHE_LINEREPLACE+1 -`define EXCEPTIONS_TAKEN `DCACHE_MISALIGNED+1 -`define INTERRUPTS_TAKEN `EXCEPTIONS_TAKEN+1 -`define MULDIV_INSTRUCTIONS `INTERRUPTS_TAKEN+1 -`define MEMORY_INSTRUCTIONS `MULDIV_INSTRUCTIONS+1 -`define EXEC_FLUSHES `MEMORY_INSTRUCTIONS+1 -`define WB_FLUSHES `EXEC_FLUSHES+1 - -`define USERMODE_CYCLES 30 -`define SUPERVISORMODE_CYCLES 31 -`define MACHINEMODE_CYLES 32 -`define MISPREDICTION_STALLS 33 -`define INTERRUPT_STALLS 34 -`define DFENCE_CYCLES 35 -`define IFENCE_CYCLES 36 -`define DCACHE_MISS_CYCLES 37 -`define ICACHE_MISS_CYCLES 38 -`define FPBUSY_CYCLES 39 -`define DIVISIONBUSY_CYCLES 40 -`define TOTAL_STALL_CYCLES 41 -`define PAGEWALK_CYCLES 42 -`define COREBUS_CYCLES 43 - -/////////////////////////////////////////////////////////////////////////////////// -/*====== Define the slave number of each peripheral=== */ -//`ifdef simulate -// `define Sdram_slave_num 0 -// `define Sdram_cfg_slave_num `Sdram_slave_num -// `define BootRom_slave_num `Sdram_cfg_slave_num+1 -// `define Uart0_slave_num `BootRom_slave_num+1 -// `define Uart1_slave_num `Uart0_slave_num+1 -// `define Debug_slave_num `Uart1_slave_num+1 -// `define Plic_slave_num `Debug_slave_num+1 -// `define Qspi0_slave_num `Plic_slave_num -// `define Qspi1_slave_num `Qspi0_slave_num -// `define Num_Slaves `Qspi1_slave_num -//`else -// `define Uart0_slave_num 0 -// `define Uart1_slave_num 1 -// `define Qspi0_slave_num 2 -// `define Qspi1_slave_num 3 -// `define I2c0_slave_num 4 -// `define I2c1_slave_num 5 -// `define Sdram_slave_num 6 -// `define Sdram_cfg_slave_num 7 -// `define Dma_slave_num 8 -// `define Hyperflash_mem_slave_num 9 -// `define Hyperflash_reg_slave_num 10 -// `define Debug_slave_num 11 -// `define AxiExp1_slave_num 12 -// `define GPIO_slave_num 13 -// `define BootRom_slave_num 14 -// `define PLIC_slave_num 15 -// `define TCM_slave_num 16 -//`endif -/*=================================================== */ - -/*===== Define the base address of each peripheral === */ - `define DebugBase 'h00000000 - `define DebugEnd 'h000000FF - `define BootRomBase 'h00001000 - `define BootRomEnd 'h00010FFF - `define GPIOBase 'h00011100 - `define GPIOEnd 'h000111FF // 2 32-bit registers - `define UART0Base 'h00011200 - `define UART0End 'h000112FF // 8 32-bit registers - `define UART1Base 'h00011300 - `define UART1End 'h000113FF // 2 32-bit registers - `define I2C0Base 'h00011400 - `define I2C0End 'h000114FF // 8 32-bit registers - `define I2C1Base 'h00011500 - `define I2C1End 'h000115FF // 8 32-bit registers - `define DMABase 'h00011600 - `define DMAEnd 'h000116FF // TODO - `define SDRAMCfgBase 'h00011700 - `define SDRAMCfgEnd 'h000117FF // 12 32-bit registers - `define QSPI0CfgBase 'h00011800 - `define QSPI0CfgEnd 'h000118FF // 13 32-bit registers - `define QSPI1CfgBase 'h00011900 - `define QSPI1CfgEnd 'h000119FF // 13 32-bit registers - `define PWMBase 'h00011A00 - `define PWMEnd 'h00011A0C // 4 32-bit registers - `define TCMBase 'h00020000 // - `define TCMEnd 'h00040000 // 128KB - `define VMEBase 'h40000000 - `define VMEEnd 'h4FFFFFFF // 1GB - `ifdef FlexBus_verify - `define FlexBusBase 'h80000000 - `define FlexBusEnd 'h8FFFFFFF - `else - `define FlexBusBase 'h50000000 - `define FlexBusEnd 'h5FFFFFFF - `endif - `define ClintBase 'h02000000 - `define ClintEnd 'h020BFFFF - `ifdef FlexBus_verify - `define SDRAMMemBase 'h50000000 - `define SDRAMMemEnd 'h5FFFFFFF // 1GB - `else - `define SDRAMMemBase 'h80000000 - `define SDRAMMemEnd 'h8FFFFFFF // 1GB - `endif - `define QSPI0MemBase 'h90000000 - `define QSPI0MemEnd 'h9FFFFFFF // 256 MB - `define QSPI1MemBase 'hA0000000 - `define QSPI1MemEnd 'hAFFFFFFF // 256 MB - `define PLICBase 'h0c000000 - `define PLICEnd 'h10000000 - `define AxiExp1Base 'hC0000000 - `define AxiExp1End 'hFFFFFFFF -/*=================================================== */ -/*== Define the range of bytes per peripheral==== -`ifdef simulate - `define MemCRange 'h7FFFFFFF - `define ConfigMRange 'h3000 - `define DebugRange 'h44 -`else - `define BootRomRange 'hFFF //4KB for Now - `define GPIORange 'h8 //2 registers for GPIO - `define UART0Range 'h38 //8 Registers - `define UART1Range 'h38 //2 registers - `define I2C0Range 'h38 //6 Registers. Adding +2 to just have a backup, if at all it might be required - `define I2C1Range 'h38 //8 registers - `define DMARange 'hFF - `define SDRAMCfgRange 'h58 //12 registers - `define QSPI0CfgRange 'h60 //13 registers - `define QSPI1CfgRange 'h60 //13 registers - `define HyperCfgRange 'h70 //15 registers - `define SDRAMMemRange 'hFFFFFFF //512 MB - `define HyperMemRange 'hFFFFFFF //512 MB - `define QSPI0MemRange 'h7FFFFFFF //2 GB - `define QSPI1MemRange 'h7FFFFFFF //2 GB - `define AxiExpRange 'hFFFFFFFF //512 MB for now! - `define DebugRange 'h44 //16 Registers -- 32 bit -`endif - /*=================================================== */ -`define IONum 32 -