From: Andrew Burgess Date: Thu, 31 Mar 2022 10:43:13 +0000 (+0100) Subject: gdb: remove reggroup_next and reggroup_prev X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=1bca9b1e6be9cb45684f38dba0d4d323447a653a;p=binutils-gdb.git gdb: remove reggroup_next and reggroup_prev Add a new function gdbarch_reggroups that returns a reference to a vector containing all the reggroups for an architecture. Make use of this function throughout GDB instead of the existing reggroup_next and reggroup_prev functions. Finally, delete the reggroup_next and reggroup_prev functions. Most of these changes are pretty straight forward, using range based for loops instead of the old style look using reggroup_next. There are two places where the changes are less straight forward. In gdb/python/py-registers.c, the register group iterator needed to change slightly. As the iterator is tightly coupled to the gdbarch, I just fetch the register group vector from the gdbarch when needed, and use an index counter to find the next item from the vector when needed. In gdb/tui/tui-regs.c the tui_reg_next and tui_reg_prev functions are just wrappers around reggroup_next and reggroup_prev respectively. I've just inlined the logic of the old functions into the tui functions. As the tui function had its own special twist (wrap around behaviour) I think this is OK. There should be no user visible changes after this commit. --- diff --git a/gdb/completer.c b/gdb/completer.c index 63b4cd22d24..f4b5917095d 100644 --- a/gdb/completer.c +++ b/gdb/completer.c @@ -1819,11 +1819,7 @@ reg_or_group_completer_1 (completion_tracker &tracker, if ((targets & complete_reggroup_names) != 0) { - struct reggroup *group; - - for (group = reggroup_next (gdbarch, NULL); - group != NULL; - group = reggroup_next (gdbarch, group)) + for (const struct reggroup *group : gdbarch_reggroups (gdbarch)) { name = reggroup_name (group); if (strncmp (word, name, len) == 0) diff --git a/gdb/infcmd.c b/gdb/infcmd.c index b76345d8426..9abb91f2faa 100644 --- a/gdb/infcmd.c +++ b/gdb/infcmd.c @@ -2295,17 +2295,17 @@ registers_info (const char *addr_exp, int fpregs) /* A register group? */ { - struct reggroup *group; - - for (group = reggroup_next (gdbarch, NULL); - group != NULL; - group = reggroup_next (gdbarch, group)) + const struct reggroup *group = nullptr; + for (const struct reggroup *g : gdbarch_reggroups (gdbarch)) { /* Don't bother with a length check. Should the user enter a short register group name, go with the first group that matches. */ - if (strncmp (start, reggroup_name (group), end - start) == 0) - break; + if (strncmp (start, reggroup_name (g), end - start) == 0) + { + group = g; + break; + } } if (group != NULL) { diff --git a/gdb/python/py-registers.c b/gdb/python/py-registers.c index 41f6feab3c8..6255ddac9e7 100644 --- a/gdb/python/py-registers.c +++ b/gdb/python/py-registers.c @@ -64,8 +64,8 @@ extern PyTypeObject register_descriptor_object_type struct reggroup_iterator_object { PyObject_HEAD - /* The last register group returned. Initially this will be NULL. */ - const struct reggroup *reggroup; + /* The index into GROUPS for the next group to return. */ + std::vector::size_type index; /* Pointer back to the architecture we're finding registers for. */ struct gdbarch *gdbarch; @@ -224,17 +224,18 @@ gdbpy_reggroup_iter_next (PyObject *self) { reggroup_iterator_object *iter_obj = (reggroup_iterator_object *) self; - struct gdbarch *gdbarch = iter_obj->gdbarch; - const reggroup *next_group = reggroup_next (gdbarch, iter_obj->reggroup); - if (next_group == NULL) + const std::vector &groups + = gdbarch_reggroups (iter_obj->gdbarch); + if (iter_obj->index >= groups.size ()) { PyErr_SetString (PyExc_StopIteration, _("No more groups")); return NULL; } - iter_obj->reggroup = next_group; - return gdbpy_get_reggroup (iter_obj->reggroup).release (); + const reggroup *group = groups[iter_obj->index]; + iter_obj->index++; + return gdbpy_get_reggroup (group).release (); } /* Return a new gdb.RegisterGroupsIterator over all the register groups in @@ -251,7 +252,7 @@ gdbpy_new_reggroup_iterator (struct gdbarch *gdbarch) ®group_iterator_object_type); if (iter == NULL) return NULL; - iter->reggroup = NULL; + iter->index = 0; iter->gdbarch = gdbarch; return (PyObject *) iter; } diff --git a/gdb/regcache-dump.c b/gdb/regcache-dump.c index 2a2578558f7..409a868be76 100644 --- a/gdb/regcache-dump.c +++ b/gdb/regcache-dump.c @@ -192,11 +192,7 @@ protected: else { const char *sep = ""; - struct reggroup *group; - - for (group = reggroup_next (m_gdbarch, NULL); - group != NULL; - group = reggroup_next (m_gdbarch, group)) + for (const struct reggroup *group : gdbarch_reggroups (m_gdbarch)) { if (gdbarch_register_reggroup_p (m_gdbarch, regnum, group)) { diff --git a/gdb/reggroups.c b/gdb/reggroups.c index 262bf49cea8..7b8537e94f6 100644 --- a/gdb/reggroups.c +++ b/gdb/reggroups.c @@ -100,7 +100,7 @@ struct reggroups /* Return a reference to the list of all groups. */ - const std::vector & + const std::vector & groups () const { return m_groups; @@ -108,7 +108,7 @@ struct reggroups private: /* The register groups. */ - std::vector m_groups; + std::vector m_groups; }; static struct gdbarch_data *reggroups_data; @@ -146,62 +146,15 @@ reggroups_init (struct obstack *obstack) return groups; } -/* A register group iterator. */ - -struct reggroup * -reggroup_next (struct gdbarch *gdbarch, const struct reggroup *last) -{ - /* Don't allow this function to be called during architecture - creation. If there are no groups, use the default groups list. */ - struct reggroups *groups - = (struct reggroups *) gdbarch_data (gdbarch, reggroups_data); - gdb_assert (groups != nullptr); - gdb_assert (groups->size () > 0); - - /* Return the first/next reggroup. */ - if (last == nullptr) - return groups->groups ().front (); - for (int i = 0; i < groups->size (); ++i) - { - if (groups->groups ()[i] == last) - { - if (i + 1 < groups->size ()) - return groups->groups ()[i + 1]; - else - return nullptr; - } - } - - return nullptr; -} - /* See reggroups.h. */ - -struct reggroup * -reggroup_prev (struct gdbarch *gdbarch, const struct reggroup *curr) +const std::vector & +gdbarch_reggroups (struct gdbarch *gdbarch) { - /* Don't allow this function to be called during architecture - creation. If there are no groups, use the default groups list. */ struct reggroups *groups = (struct reggroups *) gdbarch_data (gdbarch, reggroups_data); gdb_assert (groups != nullptr); gdb_assert (groups->size () > 0); - - /* Return the first/next reggroup. */ - if (curr == nullptr) - return groups->groups ().back (); - for (int i = groups->size () - 1; i >= 0; --i) - { - if (groups->groups ()[i] == curr) - { - if (i - 1 >= 0) - return groups->groups ()[i - 1]; - else - return nullptr; - } - } - - return nullptr; + return groups->groups (); } /* Is REGNUM a member of REGGROUP? */ @@ -239,11 +192,7 @@ default_register_reggroup_p (struct gdbarch *gdbarch, int regnum, const reggroup * reggroup_find (struct gdbarch *gdbarch, const char *name) { - struct reggroup *group; - - for (group = reggroup_next (gdbarch, NULL); - group != NULL; - group = reggroup_next (gdbarch, group)) + for (const struct reggroup *group : gdbarch_reggroups (gdbarch)) { if (strcmp (name, reggroup_name (group)) == 0) return group; @@ -256,52 +205,35 @@ reggroup_find (struct gdbarch *gdbarch, const char *name) static void reggroups_dump (struct gdbarch *gdbarch, struct ui_file *file) { - struct reggroup *group = NULL; + static constexpr const char *fmt = " %-10s %-10s\n"; - do + gdb_printf (file, fmt, "Group", "Type"); + + for (const struct reggroup *group : gdbarch_reggroups (gdbarch)) { /* Group name. */ - { - const char *name; - - if (group == NULL) - name = "Group"; - else - name = reggroup_name (group); - gdb_printf (file, " %-10s", name); - } + const char *name = reggroup_name (group); /* Group type. */ - { - const char *type; - - if (group == NULL) - type = "Type"; - else - { - switch (reggroup_type (group)) - { - case USER_REGGROUP: - type = "user"; - break; - case INTERNAL_REGGROUP: - type = "internal"; - break; - default: - internal_error (__FILE__, __LINE__, _("bad switch")); - } - } - gdb_printf (file, " %-10s", type); - } + const char *type; + + switch (reggroup_type (group)) + { + case USER_REGGROUP: + type = "user"; + break; + case INTERNAL_REGGROUP: + type = "internal"; + break; + default: + internal_error (__FILE__, __LINE__, _("bad switch")); + } /* Note: If you change this, be sure to also update the documentation. */ - - gdb_printf (file, "\n"); - group = reggroup_next (gdbarch, group); + gdb_printf (file, fmt, name, type); } - while (group != NULL); } static void diff --git a/gdb/reggroups.h b/gdb/reggroups.h index bc87a7325f0..4f0453871fc 100644 --- a/gdb/reggroups.h +++ b/gdb/reggroups.h @@ -53,14 +53,10 @@ extern void reggroup_add (struct gdbarch *gdbarch, struct reggroup *group); extern const char *reggroup_name (const struct reggroup *reggroup); extern enum reggroup_type reggroup_type (const struct reggroup *reggroup); -/* Iterators for the architecture's register groups. Pass in NULL, returns - the first (for next), or last (for prev) group. Pass in a group, - returns the next or previous group, or NULL when either the end or the - beginning of the group list is reached. */ -extern struct reggroup *reggroup_next (struct gdbarch *gdbarch, - const struct reggroup *last); -extern struct reggroup *reggroup_prev (struct gdbarch *gdbarch, - const struct reggroup *curr); +/* Return the list of all register groups for GDBARCH. */ +extern const std::vector & + gdbarch_reggroups (struct gdbarch *gdbarch); + /* Find a reggroup by name. */ extern const reggroup *reggroup_find (struct gdbarch *gdbarch, const char *name); diff --git a/gdb/tui/tui-regs.c b/gdb/tui/tui-regs.c index b968947fa1c..2e597d061dc 100644 --- a/gdb/tui/tui-regs.c +++ b/gdb/tui/tui-regs.c @@ -514,34 +514,48 @@ tui_data_item_window::rerender (WINDOW *handle, int field_width) (void) wstandend (handle); } -/* Helper for "tui reg next", wraps a call to REGGROUP_NEXT, but adds wrap - around behaviour. Will never return nullptr. If CURRENT_GROUP is - nullptr (e.g. if the tui register window has only just been displayed - and has no current group selected), then the first register group will - be returned. */ +/* Helper for "tui reg next", returns the next register group after + CURRENT_GROUP in the register group list for GDBARCH, with wrap around + behaviour. + + If CURRENT_GROUP is nullptr (e.g. if the tui register window has only + just been displayed and has no current group selected) or the currently + selected register group can't be found (e.g. if the architecture has + changed since the register window was last updated), then the first + register group will be returned. */ static const reggroup * tui_reg_next (const reggroup *current_group, struct gdbarch *gdbarch) { - const reggroup *group = reggroup_next (gdbarch, current_group); - if (group == NULL) - group = reggroup_next (gdbarch, NULL); - return group; + const std::vector &groups = gdbarch_reggroups (gdbarch); + auto it = std::find (groups.begin (), groups.end (), current_group); + if (it != groups.end ()) + it++; + if (it == groups.end ()) + return groups.front (); + return *it; } -/* Helper for "tui reg prev", wraps a call to REGGROUP_PREV, but adds wrap - around behaviour. Will never return nullptr. If CURRENT_GROUP is - nullptr (e.g. if the tui register window has only just been displayed - and has no current group selected), then the last register group will - be returned. */ +/* Helper for "tui reg prev", returns the register group previous to + CURRENT_GROUP in the register group list for GDBARCH, with wrap around + behaviour. + + If CURRENT_GROUP is nullptr (e.g. if the tui register window has only + just been displayed and has no current group selected) or the currently + selected register group can't be found (e.g. if the architecture has + changed since the register window was last updated), then the last + register group will be returned. */ static const reggroup * tui_reg_prev (const reggroup *current_group, struct gdbarch *gdbarch) { - const reggroup *group = reggroup_prev (gdbarch, current_group); - if (group == NULL) - group = reggroup_prev (gdbarch, NULL); - return group; + const std::vector &groups = gdbarch_reggroups (gdbarch); + auto it = std::find (groups.rbegin (), groups.rend (), current_group); + if (it != groups.rend ()) + it++; + if (it == groups.rend ()) + return groups.back (); + return *it; } /* Implement the 'tui reg' command. Changes the register group displayed @@ -555,7 +569,6 @@ tui_reg_command (const char *args, int from_tty) if (args != NULL) { - const reggroup *group, *match = NULL; size_t len = strlen (args); /* Make sure the curses mode is enabled. */ @@ -569,6 +582,7 @@ tui_reg_command (const char *args, int from_tty) if (TUI_DATA_WIN == NULL || !TUI_DATA_WIN->is_visible ()) tui_regs_layout (); + const reggroup *match = nullptr; const reggroup *current_group = TUI_DATA_WIN->get_current_group (); if (strncmp (args, "next", len) == 0) match = tui_reg_next (current_group, gdbarch); @@ -579,9 +593,7 @@ tui_reg_command (const char *args, int from_tty) /* This loop matches on the initial part of a register group name. If this initial part in ARGS matches only one register group then the switch is made. */ - for (group = reggroup_next (gdbarch, NULL); - group != NULL; - group = reggroup_next (gdbarch, group)) + for (const struct reggroup *group : gdbarch_reggroups (gdbarch)) { if (strncmp (reggroup_name (group), args, len) == 0) { @@ -599,19 +611,16 @@ tui_reg_command (const char *args, int from_tty) } else { - const reggroup *group; - int first; - gdb_printf (_("\"tui reg\" must be followed by the name of " "either a register group,\nor one of 'next' " "or 'prev'. Known register groups are:\n")); - for (first = 1, group = reggroup_next (gdbarch, NULL); - group != NULL; - first = 0, group = reggroup_next (gdbarch, group)) + bool first = true; + for (const struct reggroup *group : gdbarch_reggroups (gdbarch)) { if (!first) gdb_printf (", "); + first = false; gdb_printf ("%s", reggroup_name (group)); }