From: Gustavo Zacarias Date: Tue, 5 Nov 2013 12:03:27 +0000 (-0300) Subject: configs/qemu: bump relevant config versions X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=1c7b9de8e08c7c851381037fed9e80d3f31c4881;p=buildroot.git configs/qemu: bump relevant config versions Signed-off-by: Gustavo Zacarias Signed-off-by: Peter Korsgaard --- diff --git a/board/qemu/arm-nuri/readme.txt b/board/qemu/arm-nuri/readme.txt index 0fed2f798f..6fdba81dc2 100644 --- a/board/qemu/arm-nuri/readme.txt +++ b/board/qemu/arm-nuri/readme.txt @@ -7,4 +7,4 @@ graphical window is the framebuffer. Startup time is slow because of the SMP CPU emulation so be patient. -Tested with QEMU 1.6.0 +Tested with QEMU 1.6.1 diff --git a/board/qemu/arm-versatile/linux-3.11.config b/board/qemu/arm-versatile/linux-3.11.config deleted file mode 100644 index da73575b5c..0000000000 --- a/board/qemu/arm-versatile/linux-3.11.config +++ /dev/null @@ -1,89 +0,0 @@ -CONFIG_ARCH_VERSATILE=y -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MACH_VERSATILE_AB=y -CONFIG_PCI=y -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="root=1f03 mem=32M" -CONFIG_PM=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_PHYSMAP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_SYM53C8XX_2=y -CONFIG_EEPROM_LEGACY=m -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_SMC91X=y -# CONFIG_SERIO_SERPORT is not set -CONFIG_SERIO_AMBAKMI=y -CONFIG_SERIAL_8250=m -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_8250_RSA=y -CONFIG_SERIAL_AMBA_PL011=y -CONFIG_SERIAL_AMBA_PL011_CONSOLE=y -CONFIG_LEGACY_PTY_COUNT=16 -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=m -# CONFIG_HWMON is not set -CONFIG_FB=y -CONFIG_FB_ARMCLCD=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FONTS=y -CONFIG_FONT_ACORN_8x8=y -CONFIG_SOUND=y -CONFIG_SND=m -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -CONFIG_SND_ARMAACI=m -CONFIG_MMC=y -CONFIG_MMC_ARMMMCI=m -CONFIG_EXT2_FS=y -CONFIG_VFAT_FS=m -CONFIG_JFFS2_FS=y -CONFIG_CRAMFS=y -CONFIG_MINIX_FS=y -CONFIG_ROMFS_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_NFSD=y -CONFIG_NFSD_V3=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_ISO8859_1=m -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y -CONFIG_DEBUG_LL=y diff --git a/board/qemu/arm-versatile/linux-3.12.config b/board/qemu/arm-versatile/linux-3.12.config new file mode 100644 index 0000000000..da73575b5c --- /dev/null +++ b/board/qemu/arm-versatile/linux-3.12.config @@ -0,0 +1,89 @@ +CONFIG_ARCH_VERSATILE=y +CONFIG_EXPERIMENTAL=y +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SYSVIPC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_BLK_DEV_INITRD=y +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MACH_VERSATILE_AB=y +CONFIG_PCI=y +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +CONFIG_LEDS=y +CONFIG_LEDS_CPU=y +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=1f03 mem=32M" +CONFIG_PM=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_INET_DIAG is not set +# CONFIG_IPV6 is not set +CONFIG_MTD=y +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_PHYSMAP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_SCSI_SYM53C8XX_2=y +CONFIG_EEPROM_LEGACY=m +CONFIG_NETDEVICES=y +CONFIG_NET_ETHERNET=y +CONFIG_SMC91X=y +# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_AMBAKMI=y +CONFIG_SERIAL_8250=m +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_RSA=y +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_LEGACY_PTY_COUNT=16 +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=m +# CONFIG_HWMON is not set +CONFIG_FB=y +CONFIG_FB_ARMCLCD=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FONTS=y +CONFIG_FONT_ACORN_8x8=y +CONFIG_SOUND=y +CONFIG_SND=m +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_ARMAACI=m +CONFIG_MMC=y +CONFIG_MMC_ARMMMCI=m +CONFIG_EXT2_FS=y +CONFIG_VFAT_FS=m +CONFIG_JFFS2_FS=y +CONFIG_CRAMFS=y +CONFIG_MINIX_FS=y +CONFIG_ROMFS_FS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_ROOT_NFS=y +CONFIG_NFSD=y +CONFIG_NFSD_V3=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_ISO8859_1=m +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +CONFIG_DEBUG_LL=y diff --git a/board/qemu/arm-versatile/readme.txt b/board/qemu/arm-versatile/readme.txt index 4902c5497f..7d0745f38b 100644 --- a/board/qemu/arm-versatile/readme.txt +++ b/board/qemu/arm-versatile/readme.txt @@ -5,4 +5,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. -Tested with QEMU 1.6.0 +Tested with QEMU 1.6.1 diff --git a/board/qemu/arm-vexpress/readme.txt b/board/qemu/arm-vexpress/readme.txt index 65d1996212..9a4694d68a 100644 --- a/board/qemu/arm-vexpress/readme.txt +++ b/board/qemu/arm-vexpress/readme.txt @@ -5,4 +5,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. -Tested with QEMU 1.6.0 +Tested with QEMU 1.6.1 diff --git a/board/qemu/microblazebe-mmu/linux-3.11.config b/board/qemu/microblazebe-mmu/linux-3.11.config deleted file mode 100644 index 7083cf568e..0000000000 --- a/board/qemu/microblazebe-mmu/linux-3.11.config +++ /dev/null @@ -1,68 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="rootfs.cpio" -CONFIG_INITRAMFS_COMPRESSION_GZIP=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_EXPERT=y -CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_EXTRA_PASS=y -# CONFIG_HOTPLUG is not set -# CONFIG_BASE_FULL is not set -# CONFIG_FUTEX is not set -# CONFIG_EPOLL is not set -# CONFIG_SIGNALFD is not set -# CONFIG_SHMEM is not set -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_OPT_LIB_ASM=y -CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan3adsp" -CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1 -CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1 -CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1 -CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1 -CONFIG_HZ_100=y -CONFIG_MMU=y -CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE_FORCE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -CONFIG_PROC_DEVICETREE=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_XILINX_EMACLITE=y -# CONFIG_INPUT is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -CONFIG_SERIAL_UARTLITE=y -CONFIG_SERIAL_UARTLITE_CONSOLE=y -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -# CONFIG_USB_SUPPORT is not set -CONFIG_EXT2_FS=y -# CONFIG_DNOTIFY is not set -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_CIFS=y -CONFIG_CIFS_STATS=y -CONFIG_CIFS_STATS2=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DETECT_HUNG_TASK=y -CONFIG_DEBUG_SLAB=y -CONFIG_DEBUG_SPINLOCK=y -CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_EARLY_PRINTK=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/board/qemu/microblazebe-mmu/linux-3.12.config b/board/qemu/microblazebe-mmu/linux-3.12.config new file mode 100644 index 0000000000..7083cf568e --- /dev/null +++ b/board/qemu/microblazebe-mmu/linux-3.12.config @@ -0,0 +1,68 @@ +CONFIG_EXPERIMENTAL=y +CONFIG_SYSVIPC=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="rootfs.cpio" +CONFIG_INITRAMFS_COMPRESSION_GZIP=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_EXPERT=y +CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_EXTRA_PASS=y +# CONFIG_HOTPLUG is not set +# CONFIG_BASE_FULL is not set +# CONFIG_FUTEX is not set +# CONFIG_EPOLL is not set +# CONFIG_SIGNALFD is not set +# CONFIG_SHMEM is not set +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_BLK_DEV_BSG is not set +CONFIG_OPT_LIB_ASM=y +CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan3adsp" +CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1 +CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1 +CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1 +CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1 +CONFIG_HZ_100=y +CONFIG_MMU=y +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE_FORCE=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +# CONFIG_INET_LRO is not set +# CONFIG_IPV6 is not set +CONFIG_PROC_DEVICETREE=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_NETDEVICES=y +CONFIG_NET_ETHERNET=y +CONFIG_XILINX_EMACLITE=y +# CONFIG_INPUT is not set +# CONFIG_SERIO is not set +# CONFIG_VT is not set +CONFIG_SERIAL_UARTLITE=y +CONFIG_SERIAL_UARTLITE_CONSOLE=y +# CONFIG_HW_RANDOM is not set +# CONFIG_HWMON is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_EXT2_FS=y +# CONFIG_DNOTIFY is not set +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_CIFS=y +CONFIG_CIFS_STATS=y +CONFIG_CIFS_STATS2=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_DEBUG_KERNEL=y +CONFIG_DETECT_HUNG_TASK=y +CONFIG_DEBUG_SLAB=y +CONFIG_DEBUG_SPINLOCK=y +CONFIG_DEBUG_INFO=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_EARLY_PRINTK=y +# CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/board/qemu/microblazebe-mmu/readme.txt b/board/qemu/microblazebe-mmu/readme.txt index 473a93426c..8ade434017 100644 --- a/board/qemu/microblazebe-mmu/readme.txt +++ b/board/qemu/microblazebe-mmu/readme.txt @@ -4,4 +4,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. -Tested with QEMU 1.6.0 +Tested with QEMU 1.6.1 diff --git a/board/qemu/microblazeel-mmu/linux-3.11.config b/board/qemu/microblazeel-mmu/linux-3.11.config deleted file mode 100644 index cdeb3242df..0000000000 --- a/board/qemu/microblazeel-mmu/linux-3.11.config +++ /dev/null @@ -1,67 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="rootfs.cpio" -CONFIG_INITRAMFS_COMPRESSION_GZIP=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_EXPERT=y -CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_EXTRA_PASS=y -# CONFIG_HOTPLUG is not set -# CONFIG_BASE_FULL is not set -# CONFIG_FUTEX is not set -# CONFIG_EPOLL is not set -# CONFIG_SIGNALFD is not set -# CONFIG_SHMEM is not set -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan3adsp" -CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1 -CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1 -CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1 -CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1 -CONFIG_HZ_100=y -CONFIG_MMU=y -CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE_FORCE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -CONFIG_PROC_DEVICETREE=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_XILINX_EMACLITE=y -# CONFIG_INPUT is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -CONFIG_SERIAL_UARTLITE=y -CONFIG_SERIAL_UARTLITE_CONSOLE=y -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -# CONFIG_USB_SUPPORT is not set -CONFIG_EXT2_FS=y -# CONFIG_DNOTIFY is not set -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_CIFS=y -CONFIG_CIFS_STATS=y -CONFIG_CIFS_STATS2=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DETECT_HUNG_TASK=y -CONFIG_DEBUG_SLAB=y -CONFIG_DEBUG_SPINLOCK=y -CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_EARLY_PRINTK=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/board/qemu/microblazeel-mmu/linux-3.12.config b/board/qemu/microblazeel-mmu/linux-3.12.config new file mode 100644 index 0000000000..cdeb3242df --- /dev/null +++ b/board/qemu/microblazeel-mmu/linux-3.12.config @@ -0,0 +1,67 @@ +CONFIG_EXPERIMENTAL=y +CONFIG_SYSVIPC=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="rootfs.cpio" +CONFIG_INITRAMFS_COMPRESSION_GZIP=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_EXPERT=y +CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_EXTRA_PASS=y +# CONFIG_HOTPLUG is not set +# CONFIG_BASE_FULL is not set +# CONFIG_FUTEX is not set +# CONFIG_EPOLL is not set +# CONFIG_SIGNALFD is not set +# CONFIG_SHMEM is not set +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_BLK_DEV_BSG is not set +CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan3adsp" +CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1 +CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1 +CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1 +CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1 +CONFIG_HZ_100=y +CONFIG_MMU=y +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE_FORCE=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +# CONFIG_INET_LRO is not set +# CONFIG_IPV6 is not set +CONFIG_PROC_DEVICETREE=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_NETDEVICES=y +CONFIG_NET_ETHERNET=y +CONFIG_XILINX_EMACLITE=y +# CONFIG_INPUT is not set +# CONFIG_SERIO is not set +# CONFIG_VT is not set +CONFIG_SERIAL_UARTLITE=y +CONFIG_SERIAL_UARTLITE_CONSOLE=y +# CONFIG_HW_RANDOM is not set +# CONFIG_HWMON is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_EXT2_FS=y +# CONFIG_DNOTIFY is not set +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_CIFS=y +CONFIG_CIFS_STATS=y +CONFIG_CIFS_STATS2=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_DEBUG_KERNEL=y +CONFIG_DETECT_HUNG_TASK=y +CONFIG_DEBUG_SLAB=y +CONFIG_DEBUG_SPINLOCK=y +CONFIG_DEBUG_INFO=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_EARLY_PRINTK=y +# CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/board/qemu/microblazeel-mmu/readme.txt b/board/qemu/microblazeel-mmu/readme.txt index baddc7ad92..9ac55dbca6 100644 --- a/board/qemu/microblazeel-mmu/readme.txt +++ b/board/qemu/microblazeel-mmu/readme.txt @@ -4,4 +4,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. -Tested with QEMU 1.6.0 +Tested with QEMU 1.6.1 diff --git a/board/qemu/mips-malta/linux-3.11.config b/board/qemu/mips-malta/linux-3.11.config deleted file mode 100644 index 7549ccc3c8..0000000000 --- a/board/qemu/mips-malta/linux-3.11.config +++ /dev/null @@ -1,76 +0,0 @@ -CONFIG_MIPS_MALTA=y -CONFIG_CPU_MIPS32_R2=y -CONFIG_MIPS_MT_SMP=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_HZ_100=y -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=15 -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_RELAY=y -CONFIG_NAMESPACES=y -CONFIG_UTS_NS=y -CONFIG_IPC_NS=y -CONFIG_PID_NS=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_EMBEDDED=y -# CONFIG_SYSCTL_SYSCALL is not set -# CONFIG_COMPAT_BRK is not set -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_PCI=y -CONFIG_PM=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -# CONFIG_WIRELESS is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_MISC_DEVICES is not set -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECD=y -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_NET_PCI=y -CONFIG_PCNET32=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_WLAN is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO_I8042 is not set -CONFIG_VT_HW_CONSOLE_BINDING=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -# CONFIG_MFD_SUPPORT is not set -CONFIG_FB=y -CONFIG_FB_CIRRUS=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -CONFIG_QUOTA=y -CONFIG_PROC_KCORE=y -CONFIG_TMPFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set diff --git a/board/qemu/mips-malta/linux-3.12.config b/board/qemu/mips-malta/linux-3.12.config new file mode 100644 index 0000000000..7549ccc3c8 --- /dev/null +++ b/board/qemu/mips-malta/linux-3.12.config @@ -0,0 +1,76 @@ +CONFIG_MIPS_MALTA=y +CONFIG_CPU_MIPS32_R2=y +CONFIG_MIPS_MT_SMP=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_HZ_100=y +CONFIG_EXPERIMENTAL=y +CONFIG_SYSVIPC=y +CONFIG_LOG_BUF_SHIFT=15 +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_RELAY=y +CONFIG_NAMESPACES=y +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y +CONFIG_PID_NS=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_EMBEDDED=y +# CONFIG_SYSCTL_SYSCALL is not set +# CONFIG_COMPAT_BRK is not set +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +# CONFIG_BLK_DEV_BSG is not set +CONFIG_PCI=y +CONFIG_PM=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_PNP=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_IPV6 is not set +# CONFIG_WIRELESS is not set +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_MISC_DEVICES is not set +CONFIG_IDE=y +CONFIG_BLK_DEV_IDECD=y +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_GENERIC=y +CONFIG_BLK_DEV_PIIX=y +CONFIG_NETDEVICES=y +CONFIG_NET_ETHERNET=y +CONFIG_NET_PCI=y +CONFIG_PCNET32=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_WLAN is not set +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO_I8042 is not set +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_HW_RANDOM is not set +# CONFIG_HWMON is not set +# CONFIG_MFD_SUPPORT is not set +CONFIG_FB=y +CONFIG_FB_CIRRUS=y +# CONFIG_VGA_CONSOLE is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_EXT2_FS=y +CONFIG_EXT3_FS=y +CONFIG_QUOTA=y +CONFIG_PROC_KCORE=y +CONFIG_TMPFS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_ROOT_NFS=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set diff --git a/board/qemu/mips-malta/readme.txt b/board/qemu/mips-malta/readme.txt index 33764ead60..b3679270c0 100644 --- a/board/qemu/mips-malta/readme.txt +++ b/board/qemu/mips-malta/readme.txt @@ -6,4 +6,4 @@ The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. No keyboard support has been enabled. -Tested with QEMU 1.6.0 +Tested with QEMU 1.6.1 diff --git a/board/qemu/mips64-malta/linux-3.11.config b/board/qemu/mips64-malta/linux-3.11.config deleted file mode 100644 index 6e7f7eebd5..0000000000 --- a/board/qemu/mips64-malta/linux-3.11.config +++ /dev/null @@ -1,78 +0,0 @@ -CONFIG_MIPS_MALTA=y -CONFIG_CPU_MIPS64_R1=y -CONFIG_64BIT=y -CONFIG_64BIT_PHYS_ADDR=y -CONFIG_MIPS_MT_SMP=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_HZ_100=y -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=15 -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_RELAY=y -CONFIG_NAMESPACES=y -CONFIG_UTS_NS=y -CONFIG_IPC_NS=y -CONFIG_PID_NS=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_EMBEDDED=y -# CONFIG_SYSCTL_SYSCALL is not set -# CONFIG_COMPAT_BRK is not set -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_PCI=y -CONFIG_PM=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -# CONFIG_WIRELESS is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_MISC_DEVICES is not set -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECD=y -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_NET_PCI=y -CONFIG_PCNET32=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_WLAN is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO_I8042 is not set -CONFIG_VT_HW_CONSOLE_BINDING=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -# CONFIG_MFD_SUPPORT is not set -CONFIG_FB=y -CONFIG_FB_CIRRUS=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -CONFIG_QUOTA=y -CONFIG_PROC_KCORE=y -CONFIG_TMPFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set diff --git a/board/qemu/mips64-malta/linux-3.12.config b/board/qemu/mips64-malta/linux-3.12.config new file mode 100644 index 0000000000..6e7f7eebd5 --- /dev/null +++ b/board/qemu/mips64-malta/linux-3.12.config @@ -0,0 +1,78 @@ +CONFIG_MIPS_MALTA=y +CONFIG_CPU_MIPS64_R1=y +CONFIG_64BIT=y +CONFIG_64BIT_PHYS_ADDR=y +CONFIG_MIPS_MT_SMP=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_HZ_100=y +CONFIG_EXPERIMENTAL=y +CONFIG_SYSVIPC=y +CONFIG_LOG_BUF_SHIFT=15 +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_RELAY=y +CONFIG_NAMESPACES=y +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y +CONFIG_PID_NS=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_EMBEDDED=y +# CONFIG_SYSCTL_SYSCALL is not set +# CONFIG_COMPAT_BRK is not set +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +# CONFIG_BLK_DEV_BSG is not set +CONFIG_PCI=y +CONFIG_PM=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_PNP=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_IPV6 is not set +# CONFIG_WIRELESS is not set +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_MISC_DEVICES is not set +CONFIG_IDE=y +CONFIG_BLK_DEV_IDECD=y +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_GENERIC=y +CONFIG_BLK_DEV_PIIX=y +CONFIG_NETDEVICES=y +CONFIG_NET_ETHERNET=y +CONFIG_NET_PCI=y +CONFIG_PCNET32=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_WLAN is not set +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO_I8042 is not set +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_HW_RANDOM is not set +# CONFIG_HWMON is not set +# CONFIG_MFD_SUPPORT is not set +CONFIG_FB=y +CONFIG_FB_CIRRUS=y +# CONFIG_VGA_CONSOLE is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_EXT2_FS=y +CONFIG_EXT3_FS=y +CONFIG_QUOTA=y +CONFIG_PROC_KCORE=y +CONFIG_TMPFS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_ROOT_NFS=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set diff --git a/board/qemu/mips64-malta/readme.txt b/board/qemu/mips64-malta/readme.txt index 23b85abf74..4fa8a19b16 100644 --- a/board/qemu/mips64-malta/readme.txt +++ b/board/qemu/mips64-malta/readme.txt @@ -8,4 +8,4 @@ enabled. This configuration is known to be flaky. -Tested with QEMU 1.6.0 +Tested with QEMU 1.6.1 diff --git a/board/qemu/mipsel-malta/linux-3.11.config b/board/qemu/mipsel-malta/linux-3.11.config deleted file mode 100644 index b51de4b8da..0000000000 --- a/board/qemu/mipsel-malta/linux-3.11.config +++ /dev/null @@ -1,77 +0,0 @@ -CONFIG_MIPS_MALTA=y -CONFIG_CPU_LITTLE_ENDIAN=y -CONFIG_CPU_MIPS32_R2=y -CONFIG_MIPS_MT_SMP=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_HZ_100=y -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=15 -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_RELAY=y -CONFIG_NAMESPACES=y -CONFIG_UTS_NS=y -CONFIG_IPC_NS=y -CONFIG_PID_NS=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_EMBEDDED=y -# CONFIG_SYSCTL_SYSCALL is not set -# CONFIG_COMPAT_BRK is not set -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_PCI=y -CONFIG_PM=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -# CONFIG_WIRELESS is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_MISC_DEVICES is not set -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECD=y -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_NET_PCI=y -CONFIG_PCNET32=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_WLAN is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO_I8042 is not set -CONFIG_VT_HW_CONSOLE_BINDING=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -# CONFIG_MFD_SUPPORT is not set -CONFIG_FB=y -CONFIG_FB_CIRRUS=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -CONFIG_QUOTA=y -CONFIG_PROC_KCORE=y -CONFIG_TMPFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set diff --git a/board/qemu/mipsel-malta/linux-3.12.config b/board/qemu/mipsel-malta/linux-3.12.config new file mode 100644 index 0000000000..b51de4b8da --- /dev/null +++ b/board/qemu/mipsel-malta/linux-3.12.config @@ -0,0 +1,77 @@ +CONFIG_MIPS_MALTA=y +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_CPU_MIPS32_R2=y +CONFIG_MIPS_MT_SMP=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_HZ_100=y +CONFIG_EXPERIMENTAL=y +CONFIG_SYSVIPC=y +CONFIG_LOG_BUF_SHIFT=15 +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_RELAY=y +CONFIG_NAMESPACES=y +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y +CONFIG_PID_NS=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_EMBEDDED=y +# CONFIG_SYSCTL_SYSCALL is not set +# CONFIG_COMPAT_BRK is not set +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +# CONFIG_BLK_DEV_BSG is not set +CONFIG_PCI=y +CONFIG_PM=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_PNP=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_IPV6 is not set +# CONFIG_WIRELESS is not set +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_MISC_DEVICES is not set +CONFIG_IDE=y +CONFIG_BLK_DEV_IDECD=y +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_GENERIC=y +CONFIG_BLK_DEV_PIIX=y +CONFIG_NETDEVICES=y +CONFIG_NET_ETHERNET=y +CONFIG_NET_PCI=y +CONFIG_PCNET32=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_WLAN is not set +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO_I8042 is not set +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_HW_RANDOM is not set +# CONFIG_HWMON is not set +# CONFIG_MFD_SUPPORT is not set +CONFIG_FB=y +CONFIG_FB_CIRRUS=y +# CONFIG_VGA_CONSOLE is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_EXT2_FS=y +CONFIG_EXT3_FS=y +CONFIG_QUOTA=y +CONFIG_PROC_KCORE=y +CONFIG_TMPFS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_ROOT_NFS=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set diff --git a/board/qemu/mipsel-malta/readme.txt b/board/qemu/mipsel-malta/readme.txt index 1e17828138..b77cc84e20 100644 --- a/board/qemu/mipsel-malta/readme.txt +++ b/board/qemu/mipsel-malta/readme.txt @@ -6,4 +6,4 @@ The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. No keyboard support has been enabled. -Tested with QEMU 1.6.0 +Tested with QEMU 1.6.1 diff --git a/board/qemu/powerpc-g3beige/linux-3.11.config b/board/qemu/powerpc-g3beige/linux-3.11.config deleted file mode 100644 index 098dae30ac..0000000000 --- a/board/qemu/powerpc-g3beige/linux-3.11.config +++ /dev/null @@ -1,86 +0,0 @@ -CONFIG_ALTIVEC=y -CONFIG_EXPERIMENTAL=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_COMPAT_BRK=y -CONFIG_SLAB=y -CONFIG_LBDAF=y -CONFIG_PPC_PMAC=y -CONFIG_PPC_OF_BOOT_TRAMPOLINE=y -CONFIG_PPC601_SYNC_FIX=y -CONFIG_HIGHMEM=y -CONFIG_NO_HZ=y -CONFIG_BINFMT_ELF=y -CONFIG_PROC_DEVICETREE=y -CONFIG_PM=y -CONFIG_SECCOMP=y -CONFIG_PCCARD=y -CONFIG_PCMCIA=y -CONFIG_PCMCIA_LOAD_CIS=y -CONFIG_PCMCIA_IOCTL=y -CONFIG_YENTA=y -CONFIG_ADVANCED_OPTIONS=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_INET_LRO=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FIRMWARE_IN_KERNEL=y -CONFIG_CONNECTOR=y -CONFIG_PROC_EVENTS=y -CONFIG_BLK_DEV=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_IDE=y -CONFIG_IDE_GD=y -CONFIG_IDE_GD_ATA=y -CONFIG_BLK_DEV_IDECD=y -CONFIG_IDE_PROC_FS=y -CONFIG_BLK_DEV_CMD64X=y -CONFIG_BLK_DEV_IDE_PMAC=y -CONFIG_IEEE1394=y -CONFIG_IEEE1394_OHCI1394=y -CONFIG_IEEE1394_ETH1394=y -CONFIG_IEEE1394_RAWIO=y -CONFIG_IEEE1394_VIDEO1394=y -CONFIG_IEEE1394_DV1394=y -CONFIG_MACINTOSH_DRIVERS=y -CONFIG_ADB=y -CONFIG_ADB_CUDA=y -CONFIG_ADB_PMU=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_MACE=y -CONFIG_BMAC=y -CONFIG_HAPPYMEAL=y -CONFIG_SUNGEM=y -CONFIG_CASSINI=y -CONFIG_NET_PCI=y -CONFIG_PCNET32=y -CONFIG_NE2K_PCI=y -CONFIG_8139CP=y -CONFIG_8139TOO=y -CONFIG_8139TOO_PIO=y -CONFIG_SERIO=y -CONFIG_SERIAL_PMACZILOG=y -CONFIG_SERIAL_PMACZILOG_TTYS=y -CONFIG_SERIAL_PMACZILOG_CONSOLE=y -CONFIG_HW_RANDOM=y -CONFIG_SSB=y -CONFIG_SSB_PCIHOST=y -CONFIG_SSB_PCMCIAHOST=y -CONFIG_SSB_DRIVER_PCICORE=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -CONFIG_DNOTIFY=y -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -CONFIG_PROC_KCORE=y -CONFIG_TMPFS=y -CONFIG_MISC_FILESYSTEMS=y -CONFIG_SQUASHFS=y -CONFIG_LIBCRC32C=y -CONFIG_BOOTX_TEXT=y -CONFIG_CRYPTO_HW=y diff --git a/board/qemu/powerpc-g3beige/linux-3.12.config b/board/qemu/powerpc-g3beige/linux-3.12.config new file mode 100644 index 0000000000..098dae30ac --- /dev/null +++ b/board/qemu/powerpc-g3beige/linux-3.12.config @@ -0,0 +1,86 @@ +CONFIG_ALTIVEC=y +CONFIG_EXPERIMENTAL=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +CONFIG_LBDAF=y +CONFIG_PPC_PMAC=y +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y +CONFIG_PPC601_SYNC_FIX=y +CONFIG_HIGHMEM=y +CONFIG_NO_HZ=y +CONFIG_BINFMT_ELF=y +CONFIG_PROC_DEVICETREE=y +CONFIG_PM=y +CONFIG_SECCOMP=y +CONFIG_PCCARD=y +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y +CONFIG_YENTA=y +CONFIG_ADVANCED_OPTIONS=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_INET_LRO=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y +CONFIG_BLK_DEV=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_IDE=y +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +CONFIG_BLK_DEV_IDECD=y +CONFIG_IDE_PROC_FS=y +CONFIG_BLK_DEV_CMD64X=y +CONFIG_BLK_DEV_IDE_PMAC=y +CONFIG_IEEE1394=y +CONFIG_IEEE1394_OHCI1394=y +CONFIG_IEEE1394_ETH1394=y +CONFIG_IEEE1394_RAWIO=y +CONFIG_IEEE1394_VIDEO1394=y +CONFIG_IEEE1394_DV1394=y +CONFIG_MACINTOSH_DRIVERS=y +CONFIG_ADB=y +CONFIG_ADB_CUDA=y +CONFIG_ADB_PMU=y +CONFIG_NETDEVICES=y +CONFIG_NET_ETHERNET=y +CONFIG_MACE=y +CONFIG_BMAC=y +CONFIG_HAPPYMEAL=y +CONFIG_SUNGEM=y +CONFIG_CASSINI=y +CONFIG_NET_PCI=y +CONFIG_PCNET32=y +CONFIG_NE2K_PCI=y +CONFIG_8139CP=y +CONFIG_8139TOO=y +CONFIG_8139TOO_PIO=y +CONFIG_SERIO=y +CONFIG_SERIAL_PMACZILOG=y +CONFIG_SERIAL_PMACZILOG_TTYS=y +CONFIG_SERIAL_PMACZILOG_CONSOLE=y +CONFIG_HW_RANDOM=y +CONFIG_SSB=y +CONFIG_SSB_PCIHOST=y +CONFIG_SSB_PCMCIAHOST=y +CONFIG_SSB_DRIVER_PCICORE=y +CONFIG_EXT2_FS=y +CONFIG_EXT3_FS=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_PROC_KCORE=y +CONFIG_TMPFS=y +CONFIG_MISC_FILESYSTEMS=y +CONFIG_SQUASHFS=y +CONFIG_LIBCRC32C=y +CONFIG_BOOTX_TEXT=y +CONFIG_CRYPTO_HW=y diff --git a/board/qemu/powerpc-g3beige/readme.txt b/board/qemu/powerpc-g3beige/readme.txt index 4c0bf8a3a4..07cb6604a8 100644 --- a/board/qemu/powerpc-g3beige/readme.txt +++ b/board/qemu/powerpc-g3beige/readme.txt @@ -5,4 +5,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. -Tested with QEMU 1.6.0 +Tested with QEMU 1.6.1 diff --git a/board/qemu/powerpc-mpc8544ds/readme.txt b/board/qemu/powerpc-mpc8544ds/readme.txt index 8c57eadec9..cd56ddde3c 100644 --- a/board/qemu/powerpc-mpc8544ds/readme.txt +++ b/board/qemu/powerpc-mpc8544ds/readme.txt @@ -4,4 +4,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. -Tested with QEMU 1.6.0 +Tested with QEMU 1.6.1 diff --git a/board/qemu/powerpc-virtex-ml507/readme.txt b/board/qemu/powerpc-virtex-ml507/readme.txt index e958d494ba..a9a63788aa 100644 --- a/board/qemu/powerpc-virtex-ml507/readme.txt +++ b/board/qemu/powerpc-virtex-ml507/readme.txt @@ -5,4 +5,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. -Tested with QEMU 1.6.0 +Tested with QEMU 1.6.1 diff --git a/board/qemu/sh4-r2d/readme.txt b/board/qemu/sh4-r2d/readme.txt index 45fca86d79..2a963ebf03 100644 --- a/board/qemu/sh4-r2d/readme.txt +++ b/board/qemu/sh4-r2d/readme.txt @@ -5,4 +5,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. -Tested with QEMU 1.6.0 +Tested with QEMU 1.6.1 diff --git a/board/qemu/sparc-ss10/readme.txt b/board/qemu/sparc-ss10/readme.txt index dab4028122..725ab30f27 100644 --- a/board/qemu/sparc-ss10/readme.txt +++ b/board/qemu/sparc-ss10/readme.txt @@ -5,4 +5,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. -Tested with QEMU 1.6.0 +Tested with QEMU 1.6.1 diff --git a/board/qemu/x86/linux-3.11.config b/board/qemu/x86/linux-3.11.config deleted file mode 100644 index 5bf6944e3d..0000000000 --- a/board/qemu/x86/linux-3.11.config +++ /dev/null @@ -1,67 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -# CONFIG_COMPAT_BRK is not set -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -# CONFIG_X86_EXTENDED_PLATFORM is not set -# CONFIG_SCHED_OMIT_FRAME_POINTER is not set -# CONFIG_MTRR_SANITIZER is not set -# CONFIG_SECCOMP is not set -# CONFIG_RELOCATABLE is not set -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -# CONFIG_WIRELESS is not set -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -# CONFIG_FIRMWARE_IN_KERNEL is not set -# CONFIG_BLK_DEV is not set -CONFIG_BLK_DEV_SD=y -CONFIG_ATA=y -CONFIG_ATA_PIIX=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_NET_PCI=y -CONFIG_NE2K_PCI=y -CONFIG_8139CP=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_WLAN is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO_SERPORT is not set -# CONFIG_LEGACY_PTYS is not set -# CONFIG_DEVKMEM is not set -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -# CONFIG_MFD_SUPPORT is not set -CONFIG_SOUND=y -CONFIG_SND=y -CONFIG_SND_HDA_INTEL=y -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_X86_PLATFORM_DEVICES is not set -# CONFIG_DMIID is not set -CONFIG_EXT2_FS=y -# CONFIG_DNOTIFY is not set -# CONFIG_INOTIFY_USER is not set -# CONFIG_MISC_FILESYSTEMS is not set -CONFIG_NFS_FS=y -CONFIG_ROOT_NFS=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_FRAME_POINTER is not set -# CONFIG_X86_VERBOSE_BOOTUP is not set -# CONFIG_VIRTUALIZATION is not set diff --git a/board/qemu/x86/linux-3.12.config b/board/qemu/x86/linux-3.12.config new file mode 100644 index 0000000000..5bf6944e3d --- /dev/null +++ b/board/qemu/x86/linux-3.12.config @@ -0,0 +1,67 @@ +CONFIG_EXPERIMENTAL=y +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +# CONFIG_COMPAT_BRK is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_X86_EXTENDED_PLATFORM is not set +# CONFIG_SCHED_OMIT_FRAME_POINTER is not set +# CONFIG_MTRR_SANITIZER is not set +# CONFIG_SECCOMP is not set +# CONFIG_RELOCATABLE is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_PNP=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_IPV6 is not set +# CONFIG_WIRELESS is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +# CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_BLK_DEV is not set +CONFIG_BLK_DEV_SD=y +CONFIG_ATA=y +CONFIG_ATA_PIIX=y +CONFIG_NETDEVICES=y +CONFIG_NET_ETHERNET=y +CONFIG_NET_PCI=y +CONFIG_NE2K_PCI=y +CONFIG_8139CP=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_WLAN is not set +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO_SERPORT is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_DEVKMEM is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_HW_RANDOM is not set +# CONFIG_HWMON is not set +# CONFIG_MFD_SUPPORT is not set +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_HDA_INTEL=y +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_X86_PLATFORM_DEVICES is not set +# CONFIG_DMIID is not set +CONFIG_EXT2_FS=y +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY_USER is not set +# CONFIG_MISC_FILESYSTEMS is not set +CONFIG_NFS_FS=y +CONFIG_ROOT_NFS=y +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_FRAME_POINTER is not set +# CONFIG_X86_VERBOSE_BOOTUP is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/board/qemu/x86/readme.txt b/board/qemu/x86/readme.txt index 5f3af40421..c07000c039 100644 --- a/board/qemu/x86/readme.txt +++ b/board/qemu/x86/readme.txt @@ -4,4 +4,4 @@ Run the emulation with: The login prompt will appear in the graphical window. -Tested with QEMU 1.6.0 +Tested with QEMU 1.6.1 diff --git a/board/qemu/x86_64/linux-3.11.config b/board/qemu/x86_64/linux-3.11.config deleted file mode 100644 index 5bf6944e3d..0000000000 --- a/board/qemu/x86_64/linux-3.11.config +++ /dev/null @@ -1,67 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -# CONFIG_COMPAT_BRK is not set -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -# CONFIG_X86_EXTENDED_PLATFORM is not set -# CONFIG_SCHED_OMIT_FRAME_POINTER is not set -# CONFIG_MTRR_SANITIZER is not set -# CONFIG_SECCOMP is not set -# CONFIG_RELOCATABLE is not set -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -# CONFIG_WIRELESS is not set -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -# CONFIG_FIRMWARE_IN_KERNEL is not set -# CONFIG_BLK_DEV is not set -CONFIG_BLK_DEV_SD=y -CONFIG_ATA=y -CONFIG_ATA_PIIX=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_NET_PCI=y -CONFIG_NE2K_PCI=y -CONFIG_8139CP=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_WLAN is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO_SERPORT is not set -# CONFIG_LEGACY_PTYS is not set -# CONFIG_DEVKMEM is not set -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -# CONFIG_MFD_SUPPORT is not set -CONFIG_SOUND=y -CONFIG_SND=y -CONFIG_SND_HDA_INTEL=y -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_X86_PLATFORM_DEVICES is not set -# CONFIG_DMIID is not set -CONFIG_EXT2_FS=y -# CONFIG_DNOTIFY is not set -# CONFIG_INOTIFY_USER is not set -# CONFIG_MISC_FILESYSTEMS is not set -CONFIG_NFS_FS=y -CONFIG_ROOT_NFS=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_FRAME_POINTER is not set -# CONFIG_X86_VERBOSE_BOOTUP is not set -# CONFIG_VIRTUALIZATION is not set diff --git a/board/qemu/x86_64/linux-3.12.config b/board/qemu/x86_64/linux-3.12.config new file mode 100644 index 0000000000..5bf6944e3d --- /dev/null +++ b/board/qemu/x86_64/linux-3.12.config @@ -0,0 +1,67 @@ +CONFIG_EXPERIMENTAL=y +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +# CONFIG_COMPAT_BRK is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_X86_EXTENDED_PLATFORM is not set +# CONFIG_SCHED_OMIT_FRAME_POINTER is not set +# CONFIG_MTRR_SANITIZER is not set +# CONFIG_SECCOMP is not set +# CONFIG_RELOCATABLE is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_PNP=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_IPV6 is not set +# CONFIG_WIRELESS is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +# CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_BLK_DEV is not set +CONFIG_BLK_DEV_SD=y +CONFIG_ATA=y +CONFIG_ATA_PIIX=y +CONFIG_NETDEVICES=y +CONFIG_NET_ETHERNET=y +CONFIG_NET_PCI=y +CONFIG_NE2K_PCI=y +CONFIG_8139CP=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_WLAN is not set +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO_SERPORT is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_DEVKMEM is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_HW_RANDOM is not set +# CONFIG_HWMON is not set +# CONFIG_MFD_SUPPORT is not set +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_HDA_INTEL=y +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_X86_PLATFORM_DEVICES is not set +# CONFIG_DMIID is not set +CONFIG_EXT2_FS=y +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY_USER is not set +# CONFIG_MISC_FILESYSTEMS is not set +CONFIG_NFS_FS=y +CONFIG_ROOT_NFS=y +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_FRAME_POINTER is not set +# CONFIG_X86_VERBOSE_BOOTUP is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/board/qemu/x86_64/readme.txt b/board/qemu/x86_64/readme.txt index d9eaf56229..3c344f95a8 100644 --- a/board/qemu/x86_64/readme.txt +++ b/board/qemu/x86_64/readme.txt @@ -4,4 +4,4 @@ Run the emulation with: The login prompt will appear in the graphical window. -Tested with QEMU 1.6.0 +Tested with QEMU 1.6.1 diff --git a/configs/qemu_arm_nuri_defconfig b/configs/qemu_arm_nuri_defconfig index 20b825a76c..965f55de27 100644 --- a/configs/qemu_arm_nuri_defconfig +++ b/configs/qemu_arm_nuri_defconfig @@ -15,11 +15,11 @@ BR2_TARGET_ROOTFS_INITRAMFS=y # Lock to 3.10 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="3.10.15" +BR2_DEFAULT_KERNEL_VERSION="3.10.18" # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.10.15" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.10.18" BR2_LINUX_KERNEL_DEFCONFIG="exynos4" BR2_LINUX_KERNEL_ZIMAGE=y diff --git a/configs/qemu_arm_versatile_defconfig b/configs/qemu_arm_versatile_defconfig index 322fc18c12..88df6c821d 100644 --- a/configs/qemu_arm_versatile_defconfig +++ b/configs/qemu_arm_versatile_defconfig @@ -10,14 +10,14 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Lock to 3.11 headers to avoid breaking with newer kernels +# Lock to 3.12 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="3.11.4" +BR2_DEFAULT_KERNEL_VERSION="3.12" # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.11.4" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/arm-versatile/linux-3.11.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/arm-versatile/linux-3.12.config" BR2_LINUX_KERNEL_ZIMAGE=y diff --git a/configs/qemu_arm_vexpress_defconfig b/configs/qemu_arm_vexpress_defconfig index 8bd12af551..324a8110fa 100644 --- a/configs/qemu_arm_vexpress_defconfig +++ b/configs/qemu_arm_vexpress_defconfig @@ -13,13 +13,13 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Lock to 3.11 headers to avoid breaking with newer kernels +# Lock to 3.12 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="3.11.4" +BR2_DEFAULT_KERNEL_VERSION="3.12" # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.11.4" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12" BR2_LINUX_KERNEL_DEFCONFIG="vexpress" BR2_LINUX_KERNEL_ZIMAGE=y diff --git a/configs/qemu_microblazebe_mmu_defconfig b/configs/qemu_microblazebe_mmu_defconfig index adc70745ce..0a621b1be0 100644 --- a/configs/qemu_microblazebe_mmu_defconfig +++ b/configs/qemu_microblazebe_mmu_defconfig @@ -19,9 +19,9 @@ BR2_TARGET_ROOTFS_INITRAMFS=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.11.4" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazebe-mmu/linux-3.11.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazebe-mmu/linux-3.12.config" BR2_LINUX_KERNEL_LINUX_BIN=y BR2_LINUX_KERNEL_USE_CUSTOM_DTS=y BR2_LINUX_KERNEL_CUSTOM_DTS_PATH="board/qemu/microblazebe-mmu/system.dts" diff --git a/configs/qemu_microblazeel_mmu_defconfig b/configs/qemu_microblazeel_mmu_defconfig index 792050586c..51d58c6cf7 100644 --- a/configs/qemu_microblazeel_mmu_defconfig +++ b/configs/qemu_microblazeel_mmu_defconfig @@ -19,9 +19,9 @@ BR2_TARGET_ROOTFS_INITRAMFS=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.11.4" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazeel-mmu/linux-3.11.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazeel-mmu/linux-3.12.config" BR2_LINUX_KERNEL_LINUX_BIN=y BR2_LINUX_KERNEL_USE_CUSTOM_DTS=y BR2_LINUX_KERNEL_CUSTOM_DTS_PATH="board/qemu/microblazeel-mmu/system.dts" diff --git a/configs/qemu_mips64_malta_defconfig b/configs/qemu_mips64_malta_defconfig index 0fde6c6409..c0904b5ce9 100644 --- a/configs/qemu_mips64_malta_defconfig +++ b/configs/qemu_mips64_malta_defconfig @@ -10,16 +10,16 @@ BR2_PREFER_STATIC_LIB=y BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Lock to 3.11 headers to avoid breaking with newer kernels +# Lock to 3.12 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="3.11.4" +BR2_DEFAULT_KERNEL_VERSION="3.12" # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.11.4" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64-malta/linux-3.11.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64-malta/linux-3.12.config" BR2_LINUX_KERNEL_VMLINUX=y # Serial port config diff --git a/configs/qemu_mips_malta_defconfig b/configs/qemu_mips_malta_defconfig index 6b952de53e..6e2c60133b 100644 --- a/configs/qemu_mips_malta_defconfig +++ b/configs/qemu_mips_malta_defconfig @@ -6,16 +6,16 @@ BR2_mips_32r2=y BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Lock to 3.11 headers to avoid breaking with newer kernels +# Lock to 3.12 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="3.11.4" +BR2_DEFAULT_KERNEL_VERSION="3.12" # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.11.4" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips-malta/linux-3.11.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips-malta/linux-3.12.config" BR2_LINUX_KERNEL_VMLINUX=y # Serial port config diff --git a/configs/qemu_mipsel_malta_defconfig b/configs/qemu_mipsel_malta_defconfig index 0b9137a625..ff640a10c9 100644 --- a/configs/qemu_mipsel_malta_defconfig +++ b/configs/qemu_mipsel_malta_defconfig @@ -6,16 +6,16 @@ BR2_mips_32r2=y BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Lock to 3.11 headers to avoid breaking with newer kernels +# Lock to 3.12 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="3.11.4" +BR2_DEFAULT_KERNEL_VERSION="3.12" # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.11.4" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mipsel-malta/linux-3.11.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mipsel-malta/linux-3.12.config" BR2_LINUX_KERNEL_VMLINUX=y # Serial port config diff --git a/configs/qemu_ppc_g3beige_defconfig b/configs/qemu_ppc_g3beige_defconfig index 513c49e5e9..bd0bc0307b 100644 --- a/configs/qemu_ppc_g3beige_defconfig +++ b/configs/qemu_ppc_g3beige_defconfig @@ -6,16 +6,16 @@ BR2_powerpc_750=y BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Lock to 3.11 headers to avoid breaking with newer kernels +# Lock to 3.12 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="3.11.4" +BR2_DEFAULT_KERNEL_VERSION="3.12" # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.11.4" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/powerpc-g3beige/linux-3.11.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/powerpc-g3beige/linux-3.12.config" BR2_LINUX_KERNEL_VMLINUX=y # Serial port config diff --git a/configs/qemu_ppc_mpc8544ds_defconfig b/configs/qemu_ppc_mpc8544ds_defconfig index 5396cfa7ef..687b53707b 100644 --- a/configs/qemu_ppc_mpc8544ds_defconfig +++ b/configs/qemu_ppc_mpc8544ds_defconfig @@ -6,14 +6,14 @@ BR2_powerpc_8548=y # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ROOTFS_INITRAMFS=y -# Lock to 3.11 headers to avoid breaking with newer kernels +# Lock to 3.12 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="3.11.4" +BR2_DEFAULT_KERNEL_VERSION="3.12" # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.11.4" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12" BR2_LINUX_KERNEL_DEFCONFIG="mpc85xx" BR2_LINUX_KERNEL_VMLINUX=y diff --git a/configs/qemu_ppc_virtex_ml507_defconfig b/configs/qemu_ppc_virtex_ml507_defconfig index 62dd741b7d..a0dc674d7a 100644 --- a/configs/qemu_ppc_virtex_ml507_defconfig +++ b/configs/qemu_ppc_virtex_ml507_defconfig @@ -6,9 +6,9 @@ BR2_powerpc_440=y # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ROOTFS_INITRAMFS=y -# Lock to 3.11 headers to avoid breaking with newer kernels +# Lock to 3.12 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="3.11.4" +BR2_DEFAULT_KERNEL_VERSION="3.12" # Use soft float BR2_SOFT_FLOAT=y @@ -16,7 +16,7 @@ BR2_SOFT_FLOAT=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.11.4" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12" BR2_LINUX_KERNEL_DEFCONFIG="44x/virtex5" BR2_LINUX_KERNEL_VMLINUX=y BR2_LINUX_KERNEL_DTS_SUPPORT=y diff --git a/configs/qemu_sh4_r2d_defconfig b/configs/qemu_sh4_r2d_defconfig index 99743a10c9..f7671d1679 100644 --- a/configs/qemu_sh4_r2d_defconfig +++ b/configs/qemu_sh4_r2d_defconfig @@ -12,7 +12,7 @@ BR2_TARGET_ROOTFS_EXT2=y # Lock to 3.2 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="3.2.51" +BR2_DEFAULT_KERNEL_VERSION="3.2.52" # The kernel wants to use the -m4-nofpu option to make sure that it # doesn't use floating point operations. @@ -21,7 +21,7 @@ BR2_EXTRA_GCC_CONFIG_OPTIONS="--with-multilib-list=m4,m4-nofpu" # Linux kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.2.51" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.2.52" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4-r2d/linux-3.2.config" BR2_LINUX_KERNEL_ZIMAGE=y diff --git a/configs/qemu_sparc_ss10_defconfig b/configs/qemu_sparc_ss10_defconfig index 37c40c4538..67bffbdef6 100644 --- a/configs/qemu_sparc_ss10_defconfig +++ b/configs/qemu_sparc_ss10_defconfig @@ -6,13 +6,13 @@ BR2_sparc_v8=y BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Lock to 3.11 headers to avoid breaking with newer kernels +# Lock to 3.12 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="3.11.4" +BR2_DEFAULT_KERNEL_VERSION="3.12" # Linux kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.11.4" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12" BR2_LINUX_KERNEL_DEFCONFIG="sparc32" BR2_LINUX_KERNEL_ZIMAGE=y diff --git a/configs/qemu_x86_64_defconfig b/configs/qemu_x86_64_defconfig index 520fcf104c..816cef1a9d 100644 --- a/configs/qemu_x86_64_defconfig +++ b/configs/qemu_x86_64_defconfig @@ -9,13 +9,13 @@ BR2_TARGET_GENERIC_GETTY_PORT="tty1" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Lock to 3.11 headers to avoid breaking with newer kernels +# Lock to 3.12 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="3.11.4" +BR2_DEFAULT_KERNEL_VERSION="3.12" # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.11.4" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-3.11.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-3.12.config" diff --git a/configs/qemu_x86_defconfig b/configs/qemu_x86_defconfig index 7609cde28e..ccccfa2981 100644 --- a/configs/qemu_x86_defconfig +++ b/configs/qemu_x86_defconfig @@ -10,13 +10,13 @@ BR2_TARGET_GENERIC_GETTY_PORT="tty1" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Lock to 3.11 headers to avoid breaking with newer kernels +# Lock to 3.12 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="3.11.4" +BR2_DEFAULT_KERNEL_VERSION="3.12" # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.11.4" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86/linux-3.11.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86/linux-3.12.config"