From: Thomas Petazzoni Date: Wed, 9 Jul 2014 21:20:22 +0000 (+0200) Subject: toolchain-external: remove experimental Blackfin toolchain X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=1cfeed1a4da52e2d34b5beab27a6e6dff4f76aa8;p=buildroot.git toolchain-external: remove experimental Blackfin toolchain The 2014R1 toolchain is provided in two flavours by Analog Devices: one based on gcc 4.3.x, which is considered stable, and one based on gcc 4.5.x, considered experimental. In commit 5a65b8e185fab38824da5e9b7b5b9e781e31d368 ("toolchain-external: add ADI Blackfin 2014R1 toolchain, remove 2012R1") both variants were added. However, after some testing in the autobuilders, and discussion with the Analog Devices folks, it turns out that the experimental version of the toolchain is too experimental. It causes numerous build failures, and the Analog Devices folks clearly say that it's an early release and that they expect quite a few problems to show up. Therefore, this commit removes the experimental flavor and keeps only the stable variant. Note that the removal/renaming of the Config.in options is not a problem, since those options were added after the 2014.05 release. Fixes: http://autobuild.buildroot.org/results/2a9/2a9d9c332a206fdb46bc8ba022c74d23082a6312/ http://autobuild.buildroot.org/results/e1c/e1ce0c1cdd0139208dddaa8f2441ab0e3ab2385e/ http://autobuild.buildroot.org/results/993/993aca3f4719afaa4b37524f9136fb8cdc53a066/ and more. Signed-off-by: Thomas Petazzoni Reviewed-by: "Yann E. MORIN" Signed-off-by: Peter Korsgaard --- diff --git a/toolchain/toolchain-external/Config.in b/toolchain/toolchain-external/Config.in index d369f9cc39..b524ac7ae4 100644 --- a/toolchain/toolchain-external/Config.in +++ b/toolchain/toolchain-external/Config.in @@ -689,26 +689,8 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201109 Other architecture variants (beyond Pentium-4/Xeon) are supported as well, but glibc is not optimised for it. -config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1_GCC45 - bool "Blackfin.uclinux.org 2014R1 (gcc 4.5.x stable)" - depends on BR2_bfin - depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86" - select BR2_TOOLCHAIN_EXTERNAL_UCLIBC - select BR2_INSTALL_LIBSTDCPP - select BR2_LARGEFILE - select BR2_INET_IPV6 - select BR2_TOOLCHAIN_HAS_NATIVE_RPC - select BR2_USE_WCHAR - select BR2_TOOLCHAIN_HAS_THREADS - select BR2_TOOLCHAIN_HAS_THREADS_DEBUG - select BR2_HOSTARCH_NEEDS_IA32_LIBS - select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_10 - help - Toolchain for the Blackfin architecture, from - http://blackfin.uclinux.org. - -config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1_GCC43 - bool "Blackfin.uclinux.org 2014R1 (gcc 4.3.x stable)" +config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1 + bool "Blackfin.uclinux.org 2014R1" depends on BR2_bfin depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86" select BR2_TOOLCHAIN_EXTERNAL_UCLIBC @@ -932,10 +914,8 @@ config BR2_TOOLCHAIN_EXTERNAL_PREFIX default "bfin-linux-uclibc" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2 && BR2_BINFMT_FDPIC default "bfin-uclinux" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2013R1 && BR2_BINFMT_FLAT default "bfin-linux-uclibc" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2013R1 && BR2_BINFMT_FDPIC - default "bfin-uclinux" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1_GCC43 && BR2_BINFMT_FLAT - default "bfin-linux-uclibc" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1_GCC43 && BR2_BINFMT_FDPIC - default "bfin-uclinux" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1_GCC45 && BR2_BINFMT_FLAT - default "bfin-linux-uclibc" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1_GCC45 && BR2_BINFMT_FDPIC + default "bfin-uclinux" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1 && BR2_BINFMT_FLAT + default "bfin-linux-uclibc" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1 && BR2_BINFMT_FDPIC default "arm-linux-musleabi" if BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS && BR2_arm default "armeb-linux-musleabi" if BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS && BR2_armeb default "i486-linux-musl" if BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS && BR2_i386 diff --git a/toolchain/toolchain-external/toolchain-external.mk b/toolchain/toolchain-external/toolchain-external.mk index 10ae089cff..09556865e7 100644 --- a/toolchain/toolchain-external/toolchain-external.mk +++ b/toolchain/toolchain-external/toolchain-external.mk @@ -337,14 +337,10 @@ else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2013R1),y) TOOLCHAIN_EXTERNAL_SITE = http://downloads.sourceforge.net/project/adi-toolchain/2013R1/2013R1-RC1/i386/ TOOLCHAIN_EXTERNAL_SOURCE = blackfin-toolchain-2013R1-RC1.i386.tar.bz2 TOOLCHAIN_EXTERNAL_EXTRA_DOWNLOADS = blackfin-toolchain-uclibc-full-2013R1-RC1.i386.tar.bz2 -else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1_GCC43),y) +else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1),y) TOOLCHAIN_EXTERNAL_SITE = http://downloads.sourceforge.net/project/adi-toolchain/2014R1/2014R1-RC2/i386/ TOOLCHAIN_EXTERNAL_SOURCE = blackfin-toolchain-2014R1-RC2.i386.tar.bz2 TOOLCHAIN_EXTERNAL_EXTRA_DOWNLOADS = blackfin-toolchain-uclibc-full-2014R1-RC2.i386.tar.bz2 -else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1_GCC45),y) -TOOLCHAIN_EXTERNAL_SITE = http://downloads.sourceforge.net/project/adi-toolchain/2014R1/2014R1_45-RC2/i386/ -TOOLCHAIN_EXTERNAL_SOURCE = blackfin-toolchain-2014R1_45-RC2.i386.tar.bz2 -TOOLCHAIN_EXTERNAL_EXTRA_DOWNLOADS = blackfin-toolchain-uclibc-full-2014R1_45-RC2.i386.tar.bz2 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEEL_14_3),y) TOOLCHAIN_EXTERNAL_SITE = http://sources.buildroot.net/ TOOLCHAIN_EXTERNAL_SOURCE = lin32-microblazeel-unknown-linux-gnu_14.3_early.tar.xz @@ -407,7 +403,7 @@ TOOLCHAIN_EXTERNAL_ADD_TOOLCHAIN_DEPENDENCY = NO TOOLCHAIN_EXTERNAL_INSTALL_STAGING = YES -ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2)$(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2013R1)$(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1_GCC43)$(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1_GCC45),y) +ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2)$(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2013R1)$(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1),y) # Special handling for Blackfin toolchain, because of the split in two # tarballs, and the organization of tarball contents. The tarballs # contain ./opt/uClinux/{bfin-uclinux,bfin-linux-uclibc} directories,