From: Eric Andersen Date: Tue, 31 Dec 2002 15:43:10 +0000 (-0000) Subject: Clean and update the uclibc toolchain build, and sync up with the X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=1dc53e1ebf97cc12f75aa5a344feabf5b5eb3421;p=buildroot.git Clean and update the uclibc toolchain build, and sync up with the current standalone toolchain builder Makefiles -Erik --- diff --git a/make/uclibc_toolchain.mk b/make/uclibc_toolchain.mk index 97c5a7a08a..dccd7369f8 100644 --- a/make/uclibc_toolchain.mk +++ b/make/uclibc_toolchain.mk @@ -1,6 +1,6 @@ # Makefile for to build a gcc/uClibc toolchain # -# Copyright (C) 2002 Erik Andersen +# Copyright (C) 2002-2003 Erik Andersen # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -17,14 +17,6 @@ # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ifeq ($(USE_UCLIBC_TOOLCHAIN),true) -############################################################# -# -# EDIT this stuff to suit your system and source locations -# -############################################################# - -# C compiler for the build system -HOSTCC:=gcc ############################################################# # @@ -33,7 +25,8 @@ HOSTCC:=gcc # ############################################################# GNU_TARGET_NAME:=$(ARCH)-linux -MAKE:=make +TARGET_LANGUAGES:=c,c++ +MAKE=make ############################################################# # @@ -44,9 +37,13 @@ MAKE:=make # ############################################################# BINUTILS_SITE:=ftp://ftp.gnu.org/gnu/binutils/ -BINUTILS_SOURCE:=binutils-2.12.1.tar.bz2 -BINUTILS_DIR:=$(BUILD_DIR)/binutils-2.12.1 -BINUTILS_DIR1:=$(BUILD_DIR)/binutils-build +BINUTILS_SOURCE:=binutils-2.13.2.tar.bz2 +BINUTILS_DIR:=$(BUILD_DIR)/binutils-2.13.2 +# +# Perhaps you would perfer to use the older 2.12.1 version? +#BINUTILS_SITE:=ftp://ftp.gnu.org/gnu/binutils/ +#BINUTILS_SOURCE:=binutils-2.12.1.tar.bz2 +#BINUTILS_DIR:=$(BUILD_DIR)/binutils-2.12.1 ifeq ($(USE_UCLIBC_SNAPSHOT),true) # Be aware that this changes daily.... @@ -60,10 +57,8 @@ UCLIBC_SITE:=http://www.kernel.org/pub/linux/libs/uclibc endif GCC_SITE:=ftp://ftp.gnu.org/gnu/gcc/ -GCC_SOURCE:=gcc-3.2.tar.gz -GCC_DIR:=$(BUILD_DIR)/gcc-3.2 -GCC_BUILD_DIR1:=$(BUILD_DIR)/gcc-initial -GCC_BUILD_DIR2:=$(BUILD_DIR)/gcc-final +GCC_SOURCE:=gcc-3.2.1.tar.gz +GCC_DIR:=$(BUILD_DIR)/gcc-3.2.1 @@ -92,7 +87,7 @@ $(BUILD_DIR)/.setup: # Setup some initial stuff # ############################################################# -uclibc_toolchain: uclibc gcc_final +uclibc_toolchain: gcc_final uclibc_toolchain-clean: gcc_final-clean uclibc-clean gcc_initial-clean binutils-clean @@ -105,6 +100,7 @@ uclibc_toolchain-dirclean: gcc_final-dirclean uclibc-dirclean gcc_initial-dircle # build binutils # ############################################################# +BINUTILS_DIR1:=$(BUILD_DIR)/binutils-build $(DL_DIR)/$(BINUTILS_SOURCE): $(WGET) -P $(DL_DIR) $(BINUTILS_SITE)/$(BINUTILS_SOURCE) @@ -113,18 +109,16 @@ $(BINUTILS_DIR)/.unpacked: $(BUILD_DIR)/.setup $(DL_DIR)/$(BINUTILS_SOURCE) touch $(BINUTILS_DIR)/.unpacked $(BINUTILS_DIR)/.patched: $(BINUTILS_DIR)/.unpacked - # Apply all binutils patches in the source directory, named binutils-*.patch - for p in $(SOURCE_DIR)/binutils-*.patch ; do \ - cat $$p | patch -p1 -d $(BINUTILS_DIR) ; \ - done - @if [ "`find $(BINUTILS_DIR) '(' -name '*.rej' -o -name '.*.rej' ')' -print`" ] ; then \ - echo "Aborting. Reject files found."; \ - exit 1; \ - fi - @if `echo "true" | grep -r true`; then true; else \ - echo "ERROR! Your grep doesn't support the -r argument."; \ - exit 1; \ - fi + # Apply any files named binutils-*.patch from the source directory to binutils + $(SOURCE_DIR)/patch-kernel.sh $(BINUTILS_DIR) $(SOURCE_DIR) binutils-*.patch + # + # Enable combreloc, since it is such a nice thing to have... + # + -perl -i -p -e "s,link_info.combreloc = false,link_info.combreloc = true,g;" \ + $(BINUTILS_DIR)/ld/ldmain.c + # + # Hack binutils to use the correct shared lib loader + # (cd $(BINUTILS_DIR); perl -i -p -e "s,#.*define.*ELF_DYNAMIC_INTERPRETER.*\".*\"\ ,#define ELF_DYNAMIC_INTERPRETER \"/lib/ld-uClibc.so.0\",;" \ `grep -lr "#.*define.*ELF_DYNAMIC_INTERPRETER.*\".*\"" $(BINUTILS_DIR)`); @@ -132,10 +126,15 @@ $(BINUTILS_DIR)/.patched: $(BINUTILS_DIR)/.unpacked $(BINUTILS_DIR1)/.configured: $(BINUTILS_DIR)/.patched mkdir -p $(BINUTILS_DIR1) - (cd $(BINUTILS_DIR1); CC=$(HOSTCC) $(BINUTILS_DIR)/configure --disable-shared \ + (cd $(BINUTILS_DIR1); CC=$(HOSTCC) $(BINUTILS_DIR)/configure \ --target=$(GNU_TARGET_NAME) --prefix=$(STAGING_DIR) \ + --exec-prefix=$(STAGING_DIR) --bindir=$(STAGING_DIR)/bin \ + --sbindir=$(STAGING_DIR)/sbin --sysconfdir=$(STAGING_DIR)/etc \ + --datadir=$(STAGING_DIR)/share --includedir=$(STAGING_DIR)/include \ + --libdir=$(STAGING_DIR)/lib --localstatedir=$(STAGING_DIR)/var \ + --mandir=$(STAGING_DIR)/man --infodir=$(STAGING_DIR)/info \ --enable-targets=$(GNU_TARGET_NAME) \ - --program-transform-name=s,^,$(ARCH)-uclibc-,); + --program-prefix=$(ARCH)-uclibc-); touch $(BINUTILS_DIR1)/.configured $(BINUTILS_DIR1)/binutils/objdump: $(BINUTILS_DIR1)/.configured @@ -148,7 +147,7 @@ $(STAGING_DIR)/$(GNU_TARGET_NAME)/bin/ld: $(BINUTILS_DIR1)/binutils/objdump $(STAGING_DIR)/lib/libg.a: $(STAGING_DIR)/$(GNU_TARGET_NAME)/bin/ar rv $(STAGING_DIR)/lib/libg.a; -binutils: linux_headers $(STAGING_DIR)/$(GNU_TARGET_NAME)/bin/ld $(STAGING_DIR)/lib/libg.a +binutils: $(STAGING_DIR)/$(GNU_TARGET_NAME)/bin/ld $(STAGING_DIR)/lib/libg.a binutils-clean: rm -f $(STAGING_DIR)/bin/$(GNU_TARGET_NAME)* @@ -165,6 +164,7 @@ binutils-dirclean: # Next build first pass gcc compiler # ############################################################# +GCC_BUILD_DIR1:=$(BUILD_DIR)/gcc-initial $(DL_DIR)/$(GCC_SOURCE): $(WGET) -P $(DL_DIR) $(GCC_SITE)/$(GCC_SOURCE) @@ -173,34 +173,38 @@ $(GCC_DIR)/.unpacked: $(BUILD_DIR)/.setup $(DL_DIR)/$(GCC_SOURCE) touch $(GCC_DIR)/.unpacked $(GCC_DIR)/.patched: $(GCC_DIR)/.unpacked - # Apply all gcc patches in the source directory, named gcc-*.patch - for p in $(SOURCE_DIR)/gcc-*.patch ; do \ - cat $$p | patch -p1 -d $(GCC_DIR) ; \ - done - @if [ "`find $(GCC_DIR) '(' -name '*.rej' -o -name '.*.rej' ')' -print`" ] ; then \ - echo "Aborting. Reject files found."; \ - exit 1; \ - fi + # Apply any files named gcc-*.patch from the source directory to gcc + $(SOURCE_DIR)/patch-kernel.sh $(GCC_DIR) $(SOURCE_DIR) gcc-*.patch touch $(GCC_DIR)/.patched +# The --without-headers option stopped working with gcc 3.0 and has never been +# # fixed, so we need to actually have working C library header files prior to +# # the step or libgcc will not build... $(GCC_BUILD_DIR1)/.configured: $(GCC_DIR)/.patched mkdir -p $(GCC_BUILD_DIR1) - (cd $(GCC_BUILD_DIR1); PATH=$$PATH:$(STAGING_DIR)/bin AR=$(ARCH)-uclibc-ar \ + (cd $(GCC_BUILD_DIR1); PATH=$(STAGING_DIR)/bin:$$PATH AR=$(ARCH)-uclibc-ar \ RANLIB=$(ARCH)-uclibc-ranlib CC=$(HOSTCC) $(GCC_DIR)/configure \ --target=$(GNU_TARGET_NAME) --prefix=$(STAGING_DIR) \ + --exec-prefix=$(STAGING_DIR) --bindir=$(STAGING_DIR)/bin \ + --sbindir=$(STAGING_DIR)/sbin --sysconfdir=$(STAGING_DIR)/etc \ + --datadir=$(STAGING_DIR)/share --includedir=$(STAGING_DIR)/include \ + --libdir=$(STAGING_DIR)/lib --localstatedir=$(STAGING_DIR)/var \ + --mandir=$(STAGING_DIR)/man --infodir=$(STAGING_DIR)/info \ --enable-target-optspace --disable-nls --with-gnu-ld \ - --disable-shared --enable-languages=c \ - --program-transform-name='s/^$(GNU_TARGET_NAME)-/$(ARCH)-uclibc-/'); + --disable-shared --enable-languages=c --disable-__cxa_atexit \ + --program-prefix=$(ARCH)-uclibc-); -perl -i -p -e "s,ac_cv_prog_cc_cross=no,ac_cv_prog_cc_cross=yes,g;" $(GCC_BUILD_DIR1)/config.cache touch $(GCC_BUILD_DIR1)/.configured $(GCC_BUILD_DIR1)/.compiled: $(GCC_BUILD_DIR1)/.configured - PATH=$$PATH:$(STAGING_DIR)/bin $(MAKE) -C $(GCC_BUILD_DIR1); + PATH=$(STAGING_DIR)/bin:$$PATH $(MAKE) -C $(GCC_BUILD_DIR1) \ + AR_FOR_TARGET=$(STAGING_DIR)/bin/$(ARCH)-uclibc-ar \ + RANLIB_FOR_TARGET=$(STAGING_DIR)/bin/$(ARCH)-uclibc-ranlib touch $(GCC_BUILD_DIR1)/.compiled $(GCC_BUILD_DIR1)/.installed: $(GCC_BUILD_DIR1)/.compiled - PATH=$$PATH:$(STAGING_DIR)/bin $(MAKE) -C $(GCC_BUILD_DIR1) install; - #Cleanup then mess when --program-transform-name mysteriously fails + PATH=$(STAGING_DIR)/bin:$$PATH $(MAKE) -C $(GCC_BUILD_DIR1) install; + #Cleanup then mess when --program-prefix mysteriously fails -mv $(STAGING_DIR)/bin/$(GNU_TARGET_NAME)-cpp $(STAGING_DIR)/bin/$(ARCH)-uclibc-cpp -mv $(STAGING_DIR)/bin/$(GNU_TARGET_NAME)-gcc $(STAGING_DIR)/bin/$(ARCH)-uclibc-gcc rm -f $(STAGING_DIR)/bin/gccbug $(STAGING_DIR)/bin/gcov @@ -220,10 +224,10 @@ gcc_initial-dirclean: ############################################################# # -# uClibc is built in two stages. First, we hack the uClibc -# include files and such in preparation for a gcc build. Later -# when gcc for the target arch has been compiled, we can then -# actually compile uClibc for the target... +# uClibc is built in two stages. First, we install the uClibc +# include files so that gcc can be built. Later when gcc for +# the target arch has been compiled, we can actually compile +# uClibc for the target... # ############################################################# $(DL_DIR)/$(UCLIBC_SOURCE): @@ -233,46 +237,49 @@ $(UCLIBC_DIR)/.unpacked: $(BUILD_DIR)/.setup $(DL_DIR)/$(UCLIBC_SOURCE) bzcat $(DL_DIR)/$(UCLIBC_SOURCE) | tar -C $(BUILD_DIR) -xvf - touch $(UCLIBC_DIR)/.unpacked -$(UCLIBC_DIR)/.configured: $(UCLIBC_DIR)/.unpacked - perl -i -p -e 's,^CROSS=.*,TARGET_ARCH=$(ARCH)\nCROSS=$(TARGET_CROSS),g' $(UCLIBC_DIR)/Rules.mak +$(UCLIBC_DIR)/.configured: $(UCLIBC_DIR)/.unpacked linux_headers + perl -i -p -e 's,^CROSS=.*,TARGET_ARCH=$(ARCH)\nCROSS=$(TARGET_CROSS),g' \ + $(UCLIBC_DIR)/Rules.mak cp $(SOURCE_DIR)/uClibc.config $(UCLIBC_DIR)/.config - perl -i -p -e 's,^KERNEL_SOURCE=.*,KERNEL_SOURCE=\"$(LINUX_DIR)\",g' $(UCLIBC_DIR)/.config - perl -i -p -e 's,^DEVEL_PREFIX=.*,DEVEL_PREFIX=\"$(STAGING_DIR)\",g' $(UCLIBC_DIR)/.config - perl -i -p -e 's,^SYSTEM_DEVEL_PREFIX=.*,SYSTEM_DEVEL_PREFIX=\"$(STAGING_DIR)\",g' $(UCLIBC_DIR)/.config - perl -i -p -e 's,^DEVEL_TOOL_PREFIX=.*,DEVEL_TOOL_PREFIX=\"$(STAGING_DIR)/usr\",g' $(UCLIBC_DIR)/.config - perl -i -p -e 's,^SHARED_LIB_LOADER_PATH=.*,SHARED_LIB_LOADER_PATH=\"/lib\",g' $(UCLIBC_DIR)/.config - perl -i -p -e 's,^GCC_BIN=.*,GCC_BIN=$(STAGING_DIR)/bin/$(ARCH)-uclibc-gcc,g' $(UCLIBC_DIR)/extra/gcc-uClibc/Makefile - perl -i -p -e 's,^LD_BIN=.*,LD_BIN=$(STAGING_DIR)/bin/$(ARCH)-uclibc-ld,g' $(UCLIBC_DIR)/extra/gcc-uClibc/Makefile + perl -i -p -e 's,^KERNEL_SOURCE=.*,KERNEL_SOURCE=\"$(LINUX_DIR)\",g' \ + $(UCLIBC_DIR)/.config + perl -i -p -e 's,^DEVEL_PREFIX=.*,DEVEL_PREFIX=\"$(STAGING_DIR)\",g' \ + $(UCLIBC_DIR)/.config + perl -i -p -e 's,^SYSTEM_DEVEL_PREFIX=.*,SYSTEM_DEVEL_PREFIX=\"$(STAGING_DIR)\",g' \ + $(UCLIBC_DIR)/.config + perl -i -p -e 's,^DEVEL_TOOL_PREFIX=.*,DEVEL_TOOL_PREFIX=\"$(STAGING_DIR)/usr\",g' \ + $(UCLIBC_DIR)/.config + perl -i -p -e 's,^SHARED_LIB_LOADER_PATH=.*,SHARED_LIB_LOADER_PATH=\"/lib\",g' \ + $(UCLIBC_DIR)/.config + perl -i -p -e 's,.*UCLIBC_HAS_WCHAR.*,UCLIBC_HAS_WCHAR=y\nUCLIBC_HAS_LOCALE=n,g' \ + $(UCLIBC_DIR)/.config + perl -i -p -e 's,^GCC_BIN.*,GCC_BIN=$(STAGING_DIR)/bin/$(ARCH)-uclibc-gcc,g' \ + $(UCLIBC_DIR)/extra/gcc-uClibc/Makefile + perl -i -p -e 's,^LD_BIN.*,LD_BIN=$(STAGING_DIR)/bin/$(ARCH)-uclibc-ld,g' \ + $(UCLIBC_DIR)/extra/gcc-uClibc/Makefile $(MAKE) -C $(UCLIBC_DIR) oldconfig - # Note that since the target compiler does not yet exist, we will not - # be able to properly generate include/bits/syscall.h so we will need - # to run part again later... $(MAKE) -C $(UCLIBC_DIR) headers install_dev; touch $(UCLIBC_DIR)/.configured -# Now that we have a working target compiler, rebuild the header files for the -# target so things like include/bits/syscall.h can actually be built this time -# around... -$(UCLIBC_DIR)/.config_final: $(UCLIBC_DIR)/.configured - $(MAKE) -C $(UCLIBC_DIR) headers install_dev; - touch $(UCLIBC_DIR)/.config_final - -$(UCLIBC_DIR)/lib/libc.a: $(UCLIBC_DIR)/.config_final +$(UCLIBC_DIR)/lib/libc.a: $(UCLIBC_DIR)/.configured $(MAKE) -C $(UCLIBC_DIR) $(STAGING_DIR)/lib/libc.a: $(UCLIBC_DIR)/lib/libc.a - $(MAKE) -C $(UCLIBC_DIR) install_dev install_runtime + $(MAKE) -C $(UCLIBC_DIR) install_dev install_runtime install_utils +ifneq ($(TARGET_DIR),) $(TARGET_DIR)/lib/libc.so.0: $(STAGING_DIR)/lib/libc.a $(MAKE) -C $(UCLIBC_DIR) DEVEL_PREFIX=$(TARGET_DIR) \ SYSTEM_DEVEL_PREFIX=$(TARGET_DIR) \ - DEVEL_TOOL_PREFIX=$(TARGET_DIR)/usr \ - install_runtime + DEVEL_TOOL_PREFIX=$(TARGET_DIR)/usr install_runtime $(TARGET_DIR)/usr/bin/ldd: $(TARGET_DIR)/lib/libc.so.0 $(MAKE) -C $(UCLIBC_DIR) PREFIX=$(TARGET_DIR) install_target_utils -uclibc: gcc_initial $(STAGING_DIR)/lib/libc.a $(TARGET_DIR)/lib/libc.so.0 $(TARGET_DIR)/usr/bin/ldd +UCLIBC_TARGETS=$(TARGET_DIR)/lib/libc.so.0 $(TARGET_DIR)/usr/bin/ldd +endif + +uclibc: gcc_initial $(STAGING_DIR)/lib/libc.a $(UCLIBC_TARGETS) uclibc-clean: -$(MAKE) -C $(UCLIBC_DIR) clean @@ -291,68 +298,76 @@ uclibc-dirclean: # the newly built shared uClibc library. # ############################################################# +GCC_BUILD_DIR2:=$(BUILD_DIR)/gcc-final $(GCC_DIR)/.ldso_hacks: $(GCC_DIR)/.patched + # # Hack things to use the correct shared lib loader - (cd $(GCC_DIR); set -e; export LIST=`grep -lr -- "-dynamic-linker.*ld-linux.so.[0-9]" *`;\ + # + (cd $(GCC_DIR); set -e; export LIST=`grep -lr -- "-dynamic-linker.*\.so[\.0-9]*" *`;\ if [ -n "$$LIST" ] ; then \ - perl -i -p -e "s,-dynamic-linker.*ld-linux.so.*[0-9]},\ + perl -i -p -e "s,-dynamic-linker.*\.so[\.0-9]*},\ -dynamic-linker /lib/ld-uClibc.so.0},;" $$LIST; fi); - (cd $(GCC_DIR); set -e; export LIST=`grep -lr ":gcrt1.o%s}" *`; \ - if [ -n "$$LIST" ] ; then \ - perl -i -p -e "s,:gcrt1.o%s},:crt0.o%s},g;" \ - $$LIST; fi); - (cd $(GCC_DIR); set -e; export LIST=`grep -lr ":crt1.o%s}" *`; \ - if [ -n "$$LIST" ] ; then \ - perl -i -p -e "s,:crt1.o%s},:crt0.o%s},g;" \ - $$LIST; fi); - # Fixup where gcc looks for start files to prevent glibc stuff leaking in... + # + # Prevent glibc start files from ever leaking in uninvited... + # perl -i -p -e "s,standard_startfile_prefix_1 = \".*,standard_startfile_prefix_1=\ \"$(STAGING_DIR)/lib/\";,;" $(GCC_DIR)/gcc/gcc.c; perl -i -p -e "s,standard_startfile_prefix_2 = \".*,standard_startfile_prefix_2=\ \"$(STAGING_DIR)/usr/lib/\";,;" $(GCC_DIR)/gcc/gcc.c; - # Use atexit() directly, rather than cxa_atexit - perl -i -p -e "s,int flag_use_cxa_atexit = 1;,int flag_use_cxa_atexit = 0;,g;"\ - $(GCC_DIR)/gcc/cp/decl2.c; - # Fix up a lame quirk... - perl -i -p -e "s,defined.*_GLIBCPP_USE_C99.*,1,g;" $(GCC_DIR)/libstdc++-v3/config/locale/generic/c_locale.cc; + # # Hack up the soname for libstdc++ + # perl -i -p -e "s,\.so\.1,.so.0.9.9,g;" $(GCC_DIR)/gcc/config/t-slibgcc-elf-ver; perl -i -p -e "s,-version-info.*[0-9]:[0-9]:[0-9],-version-info 9:9:0,g;" \ $(GCC_DIR)/libstdc++-v3/src/Makefile.am $(GCC_DIR)/libstdc++-v3/src/Makefile.in; perl -i -p -e "s,3\.0\.0,9.9.0,g;" $(GCC_DIR)/libstdc++-v3/acinclude.m4 \ $(GCC_DIR)/libstdc++-v3/aclocal.m4 $(GCC_DIR)/libstdc++-v3/configure; - # For now, we don't support locale-ified ctype, so bypass that problem here + # + # For now, we don't support locale-ified ctype (we will soon), + # so bypass that problem for now... + # + perl -i -p -e "s,defined.*_GLIBCPP_USE_C99.*,1,g;" \ + $(GCC_DIR)/libstdc++-v3/config/locale/generic/c_locale.cc; cp $(GCC_DIR)/libstdc++-v3/config/os/generic/bits/ctype_base.h \ $(GCC_DIR)/libstdc++-v3/config/os/gnu-linux/bits/ cp $(GCC_DIR)/libstdc++-v3/config/os/generic/bits/ctype_inline.h \ $(GCC_DIR)/libstdc++-v3/config/os/gnu-linux/bits/ cp $(GCC_DIR)/libstdc++-v3/config/os/generic/bits/ctype_noninline.h \ $(GCC_DIR)/libstdc++-v3/config/os/gnu-linux/bits/ + # # Prevent gcc from using the unwind-dw2-fde-glibc code - perl -i -p -e "s,^#ifndef inhibit_libc,#define inhibit_libc\n#ifndef inhibit_libc,g;" \ - $(GCC_DIR)/gcc/unwind-dw2-fde-glibc.c; + # + perl -i -p -e "s,^#ifndef inhibit_libc,#define inhibit_libc\n\ + #ifndef inhibit_libc,g;" $(GCC_DIR)/gcc/unwind-dw2-fde-glibc.c; touch $(GCC_DIR)/.ldso_hacks $(GCC_BUILD_DIR2)/.configured: $(GCC_DIR)/.ldso_hacks mkdir -p $(GCC_BUILD_DIR2) - (cd $(GCC_BUILD_DIR2); PATH=$$PATH:$(STAGING_DIR)/bin AR=$(ARCH)-uclibc-ar \ + (cd $(GCC_BUILD_DIR2); PATH=$(STAGING_DIR)/bin:$$PATH AR=$(ARCH)-uclibc-ar \ RANLIB=$(ARCH)-uclibc-ranlib CC=$(HOSTCC) $(GCC_DIR)/configure \ --target=$(GNU_TARGET_NAME) --prefix=$(STAGING_DIR) \ + --exec-prefix=$(STAGING_DIR) --bindir=$(STAGING_DIR)/bin \ + --sbindir=$(STAGING_DIR)/sbin --sysconfdir=$(STAGING_DIR)/etc \ + --datadir=$(STAGING_DIR)/share --includedir=$(STAGING_DIR)/include \ + --libdir=$(STAGING_DIR)/lib --localstatedir=$(STAGING_DIR)/var \ + --mandir=$(STAGING_DIR)/man --infodir=$(STAGING_DIR)/info \ --enable-target-optspace --disable-nls --with-gnu-ld \ - --disable-shared --enable-languages=c,c++ \ - --program-transform-name='s/^$(GNU_TARGET_NAME)-/$(ARCH)-uclibc-/'); + --disable-shared --enable-languages=$(TARGET_LANGUAGES) --disable-__cxa_atexit \ + --program-prefix=$(ARCH)-uclibc-); perl -i -p -e "s,ac_cv_prog_cc_cross=no,ac_cv_prog_cc_cross=yes,g;" $(GCC_BUILD_DIR2)/config.cache touch $(GCC_BUILD_DIR2)/.configured $(GCC_BUILD_DIR2)/.compiled: $(GCC_BUILD_DIR2)/.configured - PATH=$$PATH:$(STAGING_DIR)/bin $(MAKE) -C $(GCC_BUILD_DIR2) + PATH=$(STAGING_DIR)/bin:$$PATH $(MAKE) -C $(GCC_BUILD_DIR2) \ + AR_FOR_TARGET=$(STAGING_DIR)/bin/$(ARCH)-uclibc-ar \ + RANLIB_FOR_TARGET=$(STAGING_DIR)/bin/$(ARCH)-uclibc-ranlib touch $(GCC_BUILD_DIR2)/.compiled $(GCC_BUILD_DIR2)/.installed: $(GCC_BUILD_DIR2)/.compiled - PATH=$$PATH:$(STAGING_DIR)/bin $(MAKE) -C $(GCC_BUILD_DIR2) install; + PATH=$(STAGING_DIR)/bin:$$PATH $(MAKE) -C $(GCC_BUILD_DIR2) install; touch $(GCC_BUILD_DIR2)/.installed -#Cleanup then mess when --program-transform-name mysteriously fails +#Cleanup then mess when --program-prefix mysteriously fails $(GCC_BUILD_DIR2)/.fixedup: $(GCC_BUILD_DIR2)/.installed -mv $(STAGING_DIR)/bin/gcc $(STAGING_DIR)/$(GNU_TARGET_NAME)/bin; -mv $(STAGING_DIR)/bin/protoize $(STAGING_DIR)/$(GNU_TARGET_NAME)/bin; @@ -383,13 +398,12 @@ $(BUILD_DIR)/.shuffled: $(GCC_BUILD_DIR2)/.fixedup touch $(BUILD_DIR)/.shuffled $(BUILD_DIR)/.stripped: $(BUILD_DIR)/.shuffled - -$(STRIP) $(STAGING_DIR)/bin/* - -$(TARGET_CROSS)strip --strip-unneeded \ + -strip --strip-all -R .note -R .comment $(STAGING_DIR)/bin/* + -$(STAGING_DIR)/bin/$(ARCH)-uclibc-strip --strip-unneeded \ -R .note -R .comment $(STAGING_DIR)/lib/*.so*; touch $(BUILD_DIR)/.stripped -#gcc_final: $(BUILD_DIR)/.stripped -gcc_final: $(BUILD_DIR)/.shuffled +gcc_final: uclibc $(BUILD_DIR)/.stripped gcc_final-clean: rm -rf $(GCC_BUILD_DIR2) @@ -404,11 +418,11 @@ gcc_final-dirclean: # Packup the toolchain binaries # ############################################################# -$(GNU_TARGET_NAME)-toolchain.tar.bz2: - rm -f $(GNU_TARGET_NAME)-toolchain.tar.bz2 - tar -cf $(GNU_TARGET_NAME)-toolchain.tar $(STAGING_DIR) - bzip2 -9 $(GNU_TARGET_NAME)-toolchain.tar +$(ARCH)-uclibc-toolchain.tar.bz2: gcc_final + rm -f $(ARCH)-uclibc-toolchain.tar.bz2 + tar -cf $(ARCH)-uclibc-toolchain.tar $(STAGING_DIR) + bzip2 -9 $(ARCH)-uclibc-toolchain.tar -tarball: $(GNU_TARGET_NAME)-toolchain.tar.bz2 +tarball: $(ARCH)-uclibc-toolchain.tar.bz2 endif diff --git a/sources/patch-kernel.sh b/sources/patch-kernel.sh index 3b72b556ea..79401c2a74 100755 --- a/sources/patch-kernel.sh +++ b/sources/patch-kernel.sh @@ -1,8 +1,14 @@ #! /bin/sh +# A little script I whipped up to make it easy to +# patch source trees and have sane error handling +# -Erik +# +# (c) 2002 Erik Andersen # Set directories from arguments, or use defaults. targetdir=${1-.} patchdir=${2-../kernel-patches} +patchpattern=${3-*} if [ ! -d "${targetdir}" ] ; then echo "Aborting. '${targetdir}' is not a directory." @@ -13,7 +19,7 @@ if [ ! -d "${patchdir}" ] ; then exit 1 fi -for i in ${patchdir}/* ; do +for i in ${patchdir}/${patchpattern} ; do case "$i" in *.gz) type="gzip"; uncomp="gunzip -dc"; ;;