From: Eric Anholt Date: Wed, 3 Oct 2012 20:44:12 +0000 (-0700) Subject: i965/vs: Improve live interval calculation. X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=20ebebac5153affcbd44350332678a2fb04d4c96;p=mesa.git i965/vs: Improve live interval calculation. This is derived from the FS visitor code for the same, but tracks each channel separately (otherwise, some typical fill-a-channel-at-a-time patterns would produce excessive live intervals across loops and cause spilling). Reviewed-by: Kenneth Graunke Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=48375 (crash -> failure, can turn into pass by forcing unrolling still) --- diff --git a/src/mesa/drivers/dri/i965/Makefile.sources b/src/mesa/drivers/dri/i965/Makefile.sources index ab2181463f9..c0a42124641 100644 --- a/src/mesa/drivers/dri/i965/Makefile.sources +++ b/src/mesa/drivers/dri/i965/Makefile.sources @@ -125,6 +125,7 @@ i965_CXX_FILES = \ brw_vec4.cpp \ brw_vec4_emit.cpp \ brw_vec4_copy_propagation.cpp \ + brw_vec4_live_variables.cpp \ brw_vec4_reg_allocate.cpp \ brw_vec4_visitor.cpp \ gen6_blorp.cpp \ diff --git a/src/mesa/drivers/dri/i965/brw_vec4.cpp b/src/mesa/drivers/dri/i965/brw_vec4.cpp index 727d980c314..9eed5993027 100644 --- a/src/mesa/drivers/dri/i965/brw_vec4.cpp +++ b/src/mesa/drivers/dri/i965/brw_vec4.cpp @@ -265,102 +265,6 @@ src_reg::equals(src_reg *r) imm.u == r->imm.u); } -void -vec4_visitor::calculate_live_intervals() -{ - int *def = ralloc_array(mem_ctx, int, virtual_grf_count); - int *use = ralloc_array(mem_ctx, int, virtual_grf_count); - int loop_depth = 0; - int loop_start = 0; - - if (this->live_intervals_valid) - return; - - for (int i = 0; i < virtual_grf_count; i++) { - def[i] = MAX_INSTRUCTION; - use[i] = -1; - } - - int ip = 0; - foreach_list(node, &this->instructions) { - vec4_instruction *inst = (vec4_instruction *)node; - - if (inst->opcode == BRW_OPCODE_DO) { - if (loop_depth++ == 0) - loop_start = ip; - } else if (inst->opcode == BRW_OPCODE_WHILE) { - loop_depth--; - - if (loop_depth == 0) { - /* Patches up the use of vars marked for being live across - * the whole loop. - */ - for (int i = 0; i < virtual_grf_count; i++) { - if (use[i] == loop_start) { - use[i] = ip; - } - } - } - } else { - for (unsigned int i = 0; i < 3; i++) { - if (inst->src[i].file == GRF) { - int reg = inst->src[i].reg; - - if (!loop_depth) { - use[reg] = ip; - } else { - def[reg] = MIN2(loop_start, def[reg]); - use[reg] = loop_start; - - /* Nobody else is going to go smash our start to - * later in the loop now, because def[reg] now - * points before the bb header. - */ - } - } - } - if (inst->dst.file == GRF) { - int reg = inst->dst.reg; - - if (!loop_depth) { - def[reg] = MIN2(def[reg], ip); - } else { - def[reg] = MIN2(def[reg], loop_start); - } - } - } - - ip++; - } - - ralloc_free(this->virtual_grf_def); - ralloc_free(this->virtual_grf_use); - this->virtual_grf_def = def; - this->virtual_grf_use = use; - - this->live_intervals_valid = true; -} - -bool -vec4_visitor::virtual_grf_interferes(int a, int b) -{ - int start = MAX2(this->virtual_grf_def[a], this->virtual_grf_def[b]); - int end = MIN2(this->virtual_grf_use[a], this->virtual_grf_use[b]); - - /* We can't handle dead register writes here, without iterating - * over the whole instruction stream to find every single dead - * write to that register to compare to the live interval of the - * other register. Just assert that dead_code_eliminate() has been - * called. - */ - assert((this->virtual_grf_use[a] != -1 || - this->virtual_grf_def[a] == MAX_INSTRUCTION) && - (this->virtual_grf_use[b] != -1 || - this->virtual_grf_def[b] == MAX_INSTRUCTION)); - - return start < end; -} - /** * Must be called after calculate_live_intervales() to remove unused * writes to registers -- register allocation will fail otherwise diff --git a/src/mesa/drivers/dri/i965/brw_vec4_live_variables.cpp b/src/mesa/drivers/dri/i965/brw_vec4_live_variables.cpp new file mode 100644 index 00000000000..f34111c3317 --- /dev/null +++ b/src/mesa/drivers/dri/i965/brw_vec4_live_variables.cpp @@ -0,0 +1,306 @@ +/* + * Copyright © 2012 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS + * IN THE SOFTWARE. + * + * Authors: + * Eric Anholt + * + */ + +#include "brw_cfg.h" +#include "brw_vec4_live_variables.h" + +using namespace brw; + +/** @file brw_vec4_live_variables.cpp + * + * Support for computing at the basic block level which variables + * (virtual GRFs in our case) are live at entry and exit. + * + * See Muchnik's Advanced Compiler Design and Implementation, section + * 14.1 (p444). + */ + +/** + * Sets up the use[] and def[] arrays. + * + * The basic-block-level live variable analysis needs to know which + * variables get used before they're completely defined, and which + * variables are completely defined before they're used. + * + * We independently track each channel of a vec4. This is because we need to + * be able to recognize a sequence like: + * + * ... + * DP4 tmp.x a b; + * DP4 tmp.y c d; + * MUL result.xy tmp.xy e.xy + * ... + * + * as having tmp live only across that sequence (assuming it's used nowhere + * else), because it's a common pattern. A more conservative approach that + * doesn't get tmp marked a deffed in this block will tend to result in + * spilling. + */ +void +vec4_live_variables::setup_def_use() +{ + int ip = 0; + + for (int b = 0; b < cfg->num_blocks; b++) { + bblock_t *block = cfg->blocks[b]; + + assert(ip == block->start_ip); + if (b > 0) + assert(cfg->blocks[b - 1]->end_ip == ip - 1); + + for (vec4_instruction *inst = (vec4_instruction *)block->start; + inst != block->end->next; + inst = (vec4_instruction *)inst->next) { + + /* Set use[] for this instruction */ + for (unsigned int i = 0; i < 3; i++) { + if (inst->src[i].file == GRF) { + int reg = inst->src[i].reg; + + for (int j = 0; j < 4; j++) { + int c = BRW_GET_SWZ(inst->src[i].swizzle, j); + if (!bd[b].def[reg * 4 + c]) + bd[b].use[reg * 4 + c] = true; + } + } + } + + /* Check for unconditional writes to whole registers. These + * are the things that screen off preceding definitions of a + * variable, and thus qualify for being in def[]. + */ + if (inst->dst.file == GRF && + v->virtual_grf_sizes[inst->dst.reg] == 1 && + !inst->predicate) { + for (int c = 0; c < 4; c++) { + if (inst->dst.writemask & (1 << c)) { + int reg = inst->dst.reg; + if (!bd[b].use[reg * 4 + c]) + bd[b].def[reg * 4 + c] = true; + } + } + } + + ip++; + } + } +} + +/** + * The algorithm incrementally sets bits in liveout and livein, + * propagating it through control flow. It will eventually terminate + * because it only ever adds bits, and stops when no bits are added in + * a pass. + */ +void +vec4_live_variables::compute_live_variables() +{ + bool cont = true; + + while (cont) { + cont = false; + + for (int b = 0; b < cfg->num_blocks; b++) { + /* Update livein */ + for (int i = 0; i < num_vars; i++) { + if (bd[b].use[i] || (bd[b].liveout[i] && !bd[b].def[i])) { + if (!bd[b].livein[i]) { + bd[b].livein[i] = true; + cont = true; + } + } + } + + /* Update liveout */ + foreach_list(block_node, &cfg->blocks[b]->children) { + bblock_link *link = (bblock_link *)block_node; + bblock_t *block = link->block; + + for (int i = 0; i < num_vars; i++) { + if (bd[block->block_num].livein[i] && !bd[b].liveout[i]) { + bd[b].liveout[i] = true; + cont = true; + } + } + } + } + } +} + +vec4_live_variables::vec4_live_variables(vec4_visitor *v, cfg_t *cfg) + : v(v), cfg(cfg) +{ + mem_ctx = ralloc_context(cfg->mem_ctx); + + num_vars = v->virtual_grf_count * 4; + bd = rzalloc_array(mem_ctx, struct block_data, cfg->num_blocks); + + for (int i = 0; i < cfg->num_blocks; i++) { + bd[i].def = rzalloc_array(mem_ctx, bool, num_vars); + bd[i].use = rzalloc_array(mem_ctx, bool, num_vars); + bd[i].livein = rzalloc_array(mem_ctx, bool, num_vars); + bd[i].liveout = rzalloc_array(mem_ctx, bool, num_vars); + } + + setup_def_use(); + compute_live_variables(); +} + +vec4_live_variables::~vec4_live_variables() +{ + ralloc_free(mem_ctx); +} + +#define MAX_INSTRUCTION (1 << 30) + +/** + * Computes a conservative start/end of the live intervals for each virtual GRF. + * + * We could expose per-channel live intervals to the consumer based on the + * information we computed in vec4_live_variables, except that our only + * current user is virtual_grf_interferes(). So we instead union the + * per-channel ranges into a per-vgrf range for virtual_grf_def[] and + * virtual_grf_use[]. + * + * We could potentially have virtual_grf_interferes() do the test per-channel, + * which would let some interesting register allocation occur (particularly on + * code-generated GLSL sequences from the Cg compiler which does register + * allocation at the GLSL level and thus reuses components of the variable + * with distinct lifetimes). But right now the complexity of doing so doesn't + * seem worth it, since having virtual_grf_interferes() be cheap is important + * for register allocation performance. + */ +void +vec4_visitor::calculate_live_intervals() +{ + if (this->live_intervals_valid) + return; + + int *def = ralloc_array(mem_ctx, int, this->virtual_grf_count); + int *use = ralloc_array(mem_ctx, int, this->virtual_grf_count); + ralloc_free(this->virtual_grf_def); + ralloc_free(this->virtual_grf_use); + this->virtual_grf_def = def; + this->virtual_grf_use = use; + + for (int i = 0; i < this->virtual_grf_count; i++) { + def[i] = MAX_INSTRUCTION; + use[i] = -1; + } + + /* Start by setting up the intervals with no knowledge of control + * flow. + */ + int ip = 0; + foreach_list(node, &this->instructions) { + vec4_instruction *inst = (vec4_instruction *)node; + + for (unsigned int i = 0; i < 3; i++) { + if (inst->src[i].file == GRF) { + int reg = inst->src[i].reg; + + use[reg] = ip; + } + } + + if (inst->dst.file == GRF) { + int reg = inst->dst.reg; + + def[reg] = MIN2(def[reg], ip); + } + + ip++; + } + + /* Now, extend those intervals using our analysis of control flow. + * + * The control flow-aware analysis was done at a channel level, while at + * this point we're distilling it down to vgrfs. + */ + cfg_t cfg(this); + vec4_live_variables livevars(this, &cfg); + + for (int b = 0; b < cfg.num_blocks; b++) { + for (int i = 0; i < livevars.num_vars; i++) { + if (livevars.bd[b].livein[i]) { + def[i / 4] = MIN2(def[i / 4], cfg.blocks[b]->start_ip); + use[i / 4] = MAX2(use[i / 4], cfg.blocks[b]->start_ip); + } + + if (livevars.bd[b].liveout[i]) { + def[i / 4] = MIN2(def[i / 4], cfg.blocks[b]->end_ip); + use[i / 4] = MAX2(use[i / 4], cfg.blocks[b]->end_ip); + } + } + } + + this->live_intervals_valid = true; + + /* Note in the non-control-flow code above, that we only take def[] as the + * first store, and use[] as the last use. We use this in dead code + * elimination, to determine when a store never gets used. However, we + * also use these arrays to answer the virtual_grf_interferes() question + * (live interval analysis), which is used for register coalescing and + * register allocation. + * + * So, there's a conflict over what the array should mean: if use[] + * considers a def after the last use, then the dead code elimination pass + * never does anything (and it's an important pass!). But if we don't + * include dead code, then virtual_grf_interferes() lies and we'll do + * horrible things like coalesce the register that is dead-code-written + * into another register that was live across the dead write (causing the + * use of the second register to take the dead write's source value instead + * of the coalesced MOV's source value). + * + * To resolve the conflict, immediately after calculating live intervals, + * detect dead code, nuke it, and if we changed anything, calculate again + * before returning to the caller. Now we happen to produce def[] and + * use[] arrays that will work for virtual_grf_interferes(). + */ + if (dead_code_eliminate()) + calculate_live_intervals(); +} + +bool +vec4_visitor::virtual_grf_interferes(int a, int b) +{ + int a_def = this->virtual_grf_def[a], a_use = this->virtual_grf_use[a]; + int b_def = this->virtual_grf_def[b], b_use = this->virtual_grf_use[b]; + + /* If there's dead code (def but not use), it would break our test + * unless we consider it used. + */ + if ((a_use == -1 && a_def != MAX_INSTRUCTION) || + (b_use == -1 && b_def != MAX_INSTRUCTION)) { + return true; + } + + int start = MAX2(a_def, b_def); + int end = MIN2(a_use, b_use); + + return start < end; +} diff --git a/src/mesa/drivers/dri/i965/brw_vec4_live_variables.h b/src/mesa/drivers/dri/i965/brw_vec4_live_variables.h new file mode 100644 index 00000000000..438a03e45d9 --- /dev/null +++ b/src/mesa/drivers/dri/i965/brw_vec4_live_variables.h @@ -0,0 +1,81 @@ +/* + * Copyright © 2012 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS + * IN THE SOFTWARE. + * + * Authors: + * Eric Anholt + * + */ + +#include "brw_vec4.h" + +namespace brw { + +struct block_data { + /** + * Which variables are defined before being used in the block. + * + * Note that for our purposes, "defined" means unconditionally, completely + * defined. + */ + bool *def; + + /** + * Which variables are used before being defined in the block. + */ + bool *use; + + /** Which defs reach the entry point of the block. */ + bool *livein; + + /** Which defs reach the exit point of the block. */ + bool *liveout; +}; + +class vec4_live_variables { +public: + static void* operator new(size_t size, void *ctx) + { + void *node; + + node = rzalloc_size(ctx, size); + assert(node != NULL); + + return node; + } + + vec4_live_variables(vec4_visitor *v, cfg_t *cfg); + ~vec4_live_variables(); + + void setup_def_use(); + void compute_live_variables(); + + vec4_visitor *v; + cfg_t *cfg; + void *mem_ctx; + + int num_vars; + + /** Per-basic-block information on live variables */ + struct block_data *bd; +}; + +} /* namespace brw */