From: Yann E. MORIN Date: Fri, 17 Feb 2017 18:34:37 +0000 (+0100) Subject: boards/nanopi-neo: update defconfig X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=217d68bdf543f14853cda2675d005206a9ce2f83;p=buildroot.git boards/nanopi-neo: update defconfig - update to released kernel and U-Boot, - move the headers config closer to the kernel ones, - update readme.txt. Signed-off-by: "Yann E. MORIN" Signed-off-by: Peter Korsgaard --- diff --git a/board/nanopi-neo/readme.txt b/board/nanopi-neo/readme.txt index 95fc62897a..539df541d8 100644 --- a/board/nanopi-neo/readme.txt +++ b/board/nanopi-neo/readme.txt @@ -2,7 +2,7 @@ Intro ===== The instructions herein are valid for the FriendlyARM NanoPi NEO, -both the 256MiB and 512MiB versions. They should also work the the +both the 256MiB and 512MiB versions. They should also work for the NanoPi NEO Air, but this is untested so far. The FriendlyARM Nanopi NEO is a 4x4cm² board with an Allwiner H3 SoC: @@ -14,9 +14,8 @@ The FriendlyARM Nanopi NEO is a 4x4cm² board with an Allwiner H3 SoC: - 10/100 ethernet MAC - GPIOs, SPI, I2c... -Support for the Nanopi NEO in U-Boot and Linux is very recent, so -much so that we have to use an -rc tag for U-Boot and a special -Linux tree. +Support for the Nanopi NEO in U-Boot and Linux is very recent, so only +core, basic features are available. Unfortunately, support for the ethernet MAC and the USB OTG are not yet upstream, but are being actively worked on. diff --git a/configs/nanopi_neo_defconfig b/configs/nanopi_neo_defconfig index ba4534a1da..958c976ff1 100644 --- a/configs/nanopi_neo_defconfig +++ b/configs/nanopi_neo_defconfig @@ -2,19 +2,18 @@ BR2_arm=y BR2_cortex_a7=y BR2_ARM_FPU_VFPV4=y -# Cannot use same headers as the kernel, because kernel is 4.9 -# and we only know 4.8 at best so far -BR2_KERNEL_HEADERS_4_8=y - BR2_TARGET_GENERIC_HOSTNAME="nanopi-neo" BR2_TARGET_GENERIC_ISSUE="Welcome to Buildroot for the NanoPi NEO" BR2_ROOTFS_POST_BUILD_SCRIPT="board/nanopi-neo/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/nanopi-neo/post-image.sh" +# Linux headers same as kernel, a 4.9 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y + # Use a -rc kernel to get the DTS BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9-rc3" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.10" BR2_LINUX_KERNEL_DEFCONFIG="sunxi" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun8i-h3-nanopi-neo" @@ -23,7 +22,7 @@ BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun8i-h3-nanopi-neo" BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2016.11-rc3" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.01" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nanopi_neo" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_FORMAT_CUSTOM=y