From: Thomas Petazzoni Date: Tue, 21 Oct 2014 20:27:08 +0000 (+0200) Subject: arch/arm: do not distinguish revisions of ARM1136JF-S X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=24dfbe71e01346392556cb13fd9e040e9dab6fd4;p=buildroot.git arch/arm: do not distinguish revisions of ARM1136JF-S In commit 88cf3bb91792c9c04586e14f293d89a6e0c13e1d ("arch/Config.in.arm: Use armv6k for arm1136jf-s rev1"), Benoît Thébaudeau added separate options for the revision 0 and revision 1 of the ARM1136JF-S processor, so that different -march values could be used (armv6j for revision 0, armv6k for revision 1). However, this is preventing the removal of the BR2_GCC_TARGET_ARCH option, which we need to do to give only the CPU type to gcc, and let it decide the architecture variant that matches. This is because this story of revision 0 vs. revision 1 is the only case where -mcpu doesn't fully define the CPU. Moreover, a quick test with gcc shows that -march=armv6j -mcpu=arm1136jf-s is accepted, while -march=armv6k -mcpu=arm1136jf-s makes gcc complain: " warning: switch -mcpu=arm1136jf-s conflicts with -march=armv6k switch". In addition, gcc 5 will apparently no longer allow to pass all of --with-arch, --with-cpu and --with-tune, so we will anyway have to rely only on one of them. As a consequence, this commit basically reverts 88cf3bb91792c9c04586e14f293d89a6e0c13e1d and provides only one option for ARM1136JF-S. If the two revisions are really different, then they should be supported in upstream gcc with different -mcpu values. Note that the removal of the two options should not break existing full .config, since the hidden option BR2_arm1136jf_s becomes again a visible option to select the CPU. Signed-off-by: Thomas Petazzoni Cc: Benoît Thébaudeau Signed-off-by: Peter Korsgaard --- diff --git a/arch/Config.in.arm b/arch/Config.in.arm index 5441c8d399..9257c16531 100644 --- a/arch/Config.in.arm +++ b/arch/Config.in.arm @@ -69,13 +69,8 @@ config BR2_arm926t select BR2_ARM_CPU_MAYBE_HAS_VFPV2 select BR2_ARM_CPU_HAS_THUMB select BR2_ARM_CPU_ARMV5 -config BR2_arm1136jf_s_r0 - bool "arm1136jf_s rev0" - select BR2_ARM_CPU_HAS_VFPV2 - select BR2_ARM_CPU_HAS_THUMB - select BR2_ARM_CPU_ARMV6 -config BR2_arm1136jf_s_r1 - bool "arm1136jf_s rev1" +config BR2_arm1136jf_s + bool "arm1136jf-s" select BR2_ARM_CPU_HAS_VFPV2 select BR2_ARM_CPU_HAS_THUMB select BR2_ARM_CPU_ARMV6 @@ -143,10 +138,6 @@ config BR2_iwmmxt select BR2_ARM_CPU_ARMV5 endchoice -config BR2_arm1136jf_s - bool - default BR2_arm1136jf_s_r0 || BR2_arm1136jf_s_r1 - choice prompt "Target ABI" depends on BR2_arm || BR2_armeb @@ -394,8 +385,7 @@ config BR2_GCC_TARGET_ARCH default "armv4t" if BR2_arm920t default "armv4t" if BR2_arm922t default "armv5te" if BR2_arm926t - default "armv6j" if BR2_arm1136jf_s_r0 - default "armv6k" if BR2_arm1136jf_s_r1 + default "armv6j" if BR2_arm1136jf_s default "armv6zk" if BR2_arm1176jz_s default "armv6zk" if BR2_arm1176jzf_s default "armv7-a" if BR2_cortex_a5