From: Mark Alexander Date: Thu, 27 Feb 1997 21:45:29 +0000 (+0000) Subject: * remote-mips.c: Remove form feeds (^L) from source. X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=266454ca500c75b29f409c1e7d19ce6165f1bca1;p=binutils-gdb.git * remote-mips.c: Remove form feeds (^L) from source. (mips_initialize): LSI PMON doesn't support 'set regsize' command. (pmon_wait): Don't need to exit and re-enter debug mode on LSI PMON after a continue; it causes target program misbehavior. (mips_fetch_register): Don't fetch unsupported registers; this cuts down on wasted serial traffic. --- diff --git a/gdb/ChangeLog b/gdb/ChangeLog index c625e08a54c..0161c6ddee9 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,3 +1,12 @@ +Thu Feb 27 12:04:24 1997 Mark Alexander + + * remote-mips.c: Remove form feeds (^L) from source. + (mips_initialize): LSI PMON doesn't support 'set regsize' command. + (pmon_wait): Don't need to exit and re-enter debug mode on LSI + PMON after a continue; it causes target program misbehavior. + (mips_fetch_register): Don't fetch unsupported registers; this + cuts down on wasted serial traffic. + Thu Feb 27 09:38:16 1997 Stu Grossman (grossman@critters.cygnus.com) * configure.in configure (HPUX/OSF thread support): Enable this diff --git a/gdb/remote-mips.c b/gdb/remote-mips.c index a3e10d72836..a5cca1d9be0 100644 --- a/gdb/remote-mips.c +++ b/gdb/remote-mips.c @@ -47,7 +47,8 @@ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ extern void mips_set_processor_type_command PARAMS ((char *, int)); - + + /* Prototypes for local functions. */ static int mips_readchar PARAMS ((int timeout)); @@ -152,7 +153,8 @@ static void common_open PARAMS ((struct target_ops *ops, char *name, extern struct target_ops mips_ops; extern struct target_ops pmon_ops; extern struct target_ops ddb_ops; - + + /* The MIPS remote debugging interface is built on top of a simple packet protocol. Each packet is organized as follows: @@ -297,7 +299,7 @@ enum mips_monitor_type { /* PMON monitor being used: */ MON_PMON, /* 3.0.83 [COGENT,EB,FP,NET] Algorithmics Ltd. Nov 9 1995 17:19:50 */ MON_DDB, /* 2.7.473 [DDBVR4300,EL,FP,NET] Risq Modular Systems, Thu Jun 6 09:28:40 PDT 1996 */ - MON_LSI, /* 4.2.5 [EB], LSI LOGIC Corp. Wed Dec 6 07:57:45 1995 */ + MON_LSI, /* 4.3.12 [EB,FP], LSI LOGIC Corp. Tue Feb 25 13:22:14 1997 */ /* Last and unused value, for sizing vectors, etc. */ MON_LAST }; @@ -1147,7 +1149,8 @@ mips_receive_packet (buff, throw_error, timeout) return len; } - + + /* Optionally send a request to the remote system and optionally wait for the reply. This implements the remote debugging protocol, which is built on top of the packet protocol defined above. Each @@ -1432,7 +1435,8 @@ mips_initialize () if (mips_monitor != MON_IDT) { /* Ensure the correct target state: */ - mips_send_command ("set regsize 64\r", -1); + if (mips_monitor != MON_LSI) + mips_send_command ("set regsize 64\r", -1); mips_send_command ("set hostport tty0\r", -1); mips_send_command ("set brkcmd \"\"\r", -1); /* Delete all the current breakpoints: */ @@ -1668,6 +1672,7 @@ mips_resume (pid, step, siggnal) int pid, step; enum target_signal siggnal; { + int err; /* start-sanitize-gm */ #ifndef GENERAL_MAGIC @@ -1678,10 +1683,12 @@ mips_resume (pid, step, siggnal) #endif /* GENERAL_MAGIC */ /* end-sanitize-gm */ + /* LSI PMON requires returns a reply packet "0x1 s 0x0 0x57f" after + a single step, so we wait for that. */ mips_request (step ? 's' : 'c', (unsigned int) 1, (unsigned int) siggnal, - (int *) NULL, + mips_monitor == MON_LSI && step ? &err : (int *) NULL, mips_receive_wait, NULL); } @@ -1844,7 +1851,7 @@ pmon_wait (pid, status) seems to be caused by a check on the number of arguments, and the command length, within the monitor causing it to echo the command as a bad packet. */ - if (mips_monitor != MON_DDB) + if (mips_monitor != MON_DDB && mips_monitor != MON_LSI) { mips_exit_debug (); mips_enter_debug (); @@ -1928,18 +1935,26 @@ mips_fetch_registers (regno) val = 0; else { - /* Unfortunately the PMON version in the Vr4300 board has been - compiled without the 64bit register access commands. This - means we cannot get hold of the full register width. */ - if (mips_monitor == MON_DDB) - val = (unsigned)mips_request ('t', (unsigned int) mips_map_regno (regno), - (unsigned int) 0, &err, mips_receive_wait, NULL); + /* If PMON doesn't support this register, don't waste serial + bandwidth trying to read it. */ + int pmon_reg = mips_map_regno (regno); + if (regno != 0 && pmon_reg == 0) + val = 0; else - val = mips_request ('r', (unsigned int) mips_map_regno (regno), - (unsigned int) 0, &err, mips_receive_wait, NULL); - if (err) - mips_error ("Can't read register %d: %s", regno, - safe_strerror (errno)); + { + /* Unfortunately the PMON version in the Vr4300 board has been + compiled without the 64bit register access commands. This + means we cannot get hold of the full register width. */ + if (mips_monitor == MON_DDB) + val = (unsigned)mips_request ('t', (unsigned int) pmon_reg, + (unsigned int) 0, &err, mips_receive_wait, NULL); + else + val = mips_request ('r', (unsigned int) pmon_reg, + (unsigned int) 0, &err, mips_receive_wait, NULL); + if (err) + mips_error ("Can't read register %d: %s", regno, + safe_strerror (errno)); + } } { @@ -2235,7 +2250,8 @@ mips_mourn_inferior () unpush_target (current_ops); generic_mourn_inferior (); } - + + /* We can write a breakpoint and read the shadow contents in one operation. */ @@ -2540,7 +2556,8 @@ common_breakpoint (cmd, addr, mask, flags) return 0; } - + + static void send_srec (srec, len, addr) char *srec; @@ -3212,7 +3229,8 @@ mips_load (file, from_tty) clear_symtab_users (); } - + + /* The target vector. */ struct target_ops mips_ops = @@ -3261,7 +3279,8 @@ HOST:PORT to access a board over a network", /* to_doc */ NULL, /* sections_end */ OPS_MAGIC /* to_magic */ }; - + + /* An alternative target vector: */ struct target_ops pmon_ops = { @@ -3309,7 +3328,8 @@ colon, HOST:PORT to access a board over a network", /* to_doc */ NULL, /* sections_end */ OPS_MAGIC /* to_magic */ }; - + + /* Another alternative target vector. This is a PMON system, but with a different monitor prompt, aswell as some other operational differences: */ @@ -3415,7 +3435,8 @@ of the TFTP temporary file, if it differs from the filename seen by the board", NULL, /* sections_end */ OPS_MAGIC /* to_magic */ }; - + + void _initialize_remote_mips () {