From: Waldemar Brodkorb Date: Mon, 5 Jun 2017 19:52:07 +0000 (+0200) Subject: configs/qemu: bump to the latest kernel version X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=28d97609b25;p=buildroot.git configs/qemu: bump to the latest kernel version Xtensa patches no longer required, the make target name changed to Image. The Qemu binary for OpenRisc was renamed upstream. I removed the x86->x86_64 symlink, independent files preferred. Defconfig Kernel Qemu Network Status -------------------------------------------------------------- aarch64_virt 4.11.3 2.9.0 YES OK arm_versatile 4.11.3 2.9.0 YES OK arm_versatile_nommu 4.4.70 2.9.0 YES OK arm_vexpress 4.11.3 2.9.0 YES OK m68k_mcf5208 4.11.3 2.9.0 YES OK m68k_q800 4.11.3 q800-v2.4.0 NO (2) OK microblazebe 4.11.3 2.9.0 YES OK microblazeel 4.11.3 2.9.0 YES OK mips32r2el_malta 4.11.3 2.9.0 YES OK mips32r2_malta 4.11.3 2.9.0 YES OK mips32r6el_malta 4.11.3 2.9.0 YES OK mips32r6_malta 4.11.3 2.9.0 YES OK mips64el_malta 4.11.3 2.9.0 YES OK mips64_malta 4.11.3 2.9.0 YES OK mips64r6el_malta 4.11.3 2.9.0 YES OK mips64r6_malta 4.11.3 2.9.0 YES OK nios2-10m50 4.11.3 2.9.0 NO OK or1k 4.11.3 2.9.0 NO OK (5) ppc_g3beige 4.11.3 2.9.0 YES OK ppc_mpc8544ds 4.11.3 2.9.0 YES OK ppc_virtex_ml507 4.9.6 2.9.0 NO OK (3) ppc64_pseries 4.11.3 2.9.0 YES OK sh4 4.9.6 2.9.0 YES OK (4) sh4eb 4.9.6 2.9.0 NO (1) OK (4) sparc_ss10 4.11.3 2.9.0 YES OK sparc64_sun4u 4.11.3 2.9.0 YES OK sparc_sun4u 4.11.3 2.9.0 YES OK x86 4.11.3 2.9.0 YES OK x86_64 4.11.3 2.9.0 YES OK xtensa_lx60 4.11.3 2.9.0 YES OK xtensa_lx60_nommu 4.11.3 2.9.0 YES OK (1) - Probably an endian issue with 8139 emulation/driver (2) - There's a network interface, but enabling it in qemu fails (3) - Kernel oops with 4.11.3 on boot (4) - System is extremely slow with 4.11.3, needs further investigation (5) - Qemu binary got renamed to qemu-system-or1k Signed-off-by: Waldemar Brodkorb Signed-off-by: Peter Korsgaard --- diff --git a/board/qemu/aarch64-virt/linux-4.11.config b/board/qemu/aarch64-virt/linux-4.11.config new file mode 100644 index 0000000000..93cb42f2ea --- /dev/null +++ b/board/qemu/aarch64-virt/linux-4.11.config @@ -0,0 +1,56 @@ +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y +CONFIG_NO_HZ_IDLE=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_TASKSTATS=y +CONFIG_SCHED_AUTOGROUP=y +CONFIG_PROFILING=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_BLK_DEV_BSGLIB=y +CONFIG_ARCH_VEXPRESS=y +CONFIG_SMP=y +CONFIG_TRANSPARENT_HUGEPAGE=y +CONFIG_BINFMT_MISC=y +CONFIG_COMPAT=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_PACKET_DIAG=y +CONFIG_UNIX=y +CONFIG_NET_KEY=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_BRIDGE=m +CONFIG_NET_SCHED=y +CONFIG_VSOCKETS=y +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_VIRTIO_BLK=y +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_SG=y +CONFIG_SCSI_CONSTANTS=y +CONFIG_SCSI_LOGGING=y +CONFIG_SCSI_SCAN_ASYNC=y +CONFIG_SCSI_VIRTIO=y +CONFIG_ATA=y +CONFIG_NETDEVICES=y +CONFIG_DUMMY=y +CONFIG_MACVLAN=y +CONFIG_VIRTIO_NET=y +CONFIG_NLMON=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_VIRTIO_CONSOLE=y +CONFIG_HW_RANDOM=y +CONFIG_HW_RANDOM_VIRTIO=y +CONFIG_RTC_CLASS=y +CONFIG_VIRTIO_MMIO=y +CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y +CONFIG_MAILBOX=y +CONFIG_PL320_MBOX=y +CONFIG_EXT4_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/aarch64-virt/linux-4.9.config b/board/qemu/aarch64-virt/linux-4.9.config deleted file mode 100644 index 93cb42f2ea..0000000000 --- a/board/qemu/aarch64-virt/linux-4.9.config +++ /dev/null @@ -1,56 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_FHANDLE=y -CONFIG_NO_HZ_IDLE=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_TASKSTATS=y -CONFIG_SCHED_AUTOGROUP=y -CONFIG_PROFILING=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_BLK_DEV_BSGLIB=y -CONFIG_ARCH_VEXPRESS=y -CONFIG_SMP=y -CONFIG_TRANSPARENT_HUGEPAGE=y -CONFIG_BINFMT_MISC=y -CONFIG_COMPAT=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_PACKET_DIAG=y -CONFIG_UNIX=y -CONFIG_NET_KEY=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_BRIDGE=m -CONFIG_NET_SCHED=y -CONFIG_VSOCKETS=y -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -CONFIG_VIRTIO_BLK=y -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_SG=y -CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_LOGGING=y -CONFIG_SCSI_SCAN_ASYNC=y -CONFIG_SCSI_VIRTIO=y -CONFIG_ATA=y -CONFIG_NETDEVICES=y -CONFIG_DUMMY=y -CONFIG_MACVLAN=y -CONFIG_VIRTIO_NET=y -CONFIG_NLMON=y -CONFIG_VT_HW_CONSOLE_BINDING=y -CONFIG_SERIAL_AMBA_PL011=y -CONFIG_SERIAL_AMBA_PL011_CONSOLE=y -CONFIG_VIRTIO_CONSOLE=y -CONFIG_HW_RANDOM=y -CONFIG_HW_RANDOM_VIRTIO=y -CONFIG_RTC_CLASS=y -CONFIG_VIRTIO_MMIO=y -CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y -CONFIG_MAILBOX=y -CONFIG_PL320_MBOX=y -CONFIG_EXT4_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/aarch64-virt/readme.txt b/board/qemu/aarch64-virt/readme.txt index 1c4c7f9ccb..ece8a536a7 100644 --- a/board/qemu/aarch64-virt/readme.txt +++ b/board/qemu/aarch64-virt/readme.txt @@ -4,4 +4,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. -Tested with QEMU 2.6.0 +Tested with QEMU 2.9.0 diff --git a/board/qemu/arm-versatile/linux-4.11.config b/board/qemu/arm-versatile/linux-4.11.config new file mode 100644 index 0000000000..b1001d84a7 --- /dev/null +++ b/board/qemu/arm-versatile/linux-4.11.config @@ -0,0 +1,43 @@ +CONFIG_SYSVIPC=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_ARCH_MULTI_V7 is not set +CONFIG_ARCH_VERSATILE=y +CONFIG_PCI=y +CONFIG_PCI_VERSATILE=y +CONFIG_AEABI=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_SCSI_SYM53C8XX_2=y +CONFIG_NETDEVICES=y +CONFIG_8139CP=y +CONFIG_PHYLIB=y +CONFIG_INPUT_EVDEV=y +CONFIG_SERIO_AMBAKMI=y +CONFIG_LEGACY_PTY_COUNT=16 +CONFIG_SERIAL_8250=m +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_RSA=y +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=m +CONFIG_FB=y +CONFIG_FB_ARMCLCD=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_SOUND=y +CONFIG_SND=m +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_ARMAACI=m +CONFIG_EXT4_FS=y +CONFIG_VFAT_FS=m +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_MAGIC_SYSRQ=y diff --git a/board/qemu/arm-versatile/linux-4.9.config b/board/qemu/arm-versatile/linux-4.9.config deleted file mode 100644 index b1001d84a7..0000000000 --- a/board/qemu/arm-versatile/linux-4.9.config +++ /dev/null @@ -1,43 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_ARCH_MULTI_V7 is not set -CONFIG_ARCH_VERSATILE=y -CONFIG_PCI=y -CONFIG_PCI_VERSATILE=y -CONFIG_AEABI=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_SYM53C8XX_2=y -CONFIG_NETDEVICES=y -CONFIG_8139CP=y -CONFIG_PHYLIB=y -CONFIG_INPUT_EVDEV=y -CONFIG_SERIO_AMBAKMI=y -CONFIG_LEGACY_PTY_COUNT=16 -CONFIG_SERIAL_8250=m -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_8250_RSA=y -CONFIG_SERIAL_AMBA_PL011=y -CONFIG_SERIAL_AMBA_PL011_CONSOLE=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=m -CONFIG_FB=y -CONFIG_FB_ARMCLCD=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_SOUND=y -CONFIG_SND=m -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -CONFIG_SND_ARMAACI=m -CONFIG_EXT4_FS=y -CONFIG_VFAT_FS=m -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_MAGIC_SYSRQ=y diff --git a/board/qemu/arm-versatile/readme.txt b/board/qemu/arm-versatile/readme.txt index c8ea4cda85..6e899f4b5f 100644 --- a/board/qemu/arm-versatile/readme.txt +++ b/board/qemu/arm-versatile/readme.txt @@ -9,4 +9,4 @@ Or for the noMMU emulation: The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. -Tested with QEMU 2.5.0 +Tested with QEMU 2.9.0 diff --git a/board/qemu/arm-vexpress/readme.txt b/board/qemu/arm-vexpress/readme.txt index 99812b9a0f..57bb814198 100644 --- a/board/qemu/arm-vexpress/readme.txt +++ b/board/qemu/arm-vexpress/readme.txt @@ -8,4 +8,4 @@ graphical window is the framebuffer. If you want to emulate more cores change "-smp 1" to "-smp 2" for dual-core or even "smp -4" for a quad-core configuration. -Tested with QEMU 2.5.0 +Tested with QEMU 2.9.0 diff --git a/board/qemu/m68k-mcf5208/linux-4.11.config b/board/qemu/m68k-mcf5208/linux-4.11.config new file mode 100644 index 0000000000..09a89d7255 --- /dev/null +++ b/board/qemu/m68k-mcf5208/linux-4.11.config @@ -0,0 +1,28 @@ +CONFIG_M68K=y +CONFIG_COLDFIRE=y +# CONFIG_MMU is not set +CONFIG_M520x=y +CONFIG_CLOCK_SET=y +CONFIG_CLOCK_FREQ=66666666 +CONFIG_CLOCK_DIV=1 +CONFIG_M5208EVB=y +CONFIG_FREESCALE=y +CONFIG_RAMBASE=0x40000000 +CONFIG_RAMSIZE=0x0 +CONFIG_VECTORBASE=0x40000000 +CONFIG_KERNELBASE=0x40020000 +CONFIG_4KSTACKS=y +CONFIG_RAMKERNEL=y +CONFIG_BINFMT_FLAT=y +CONFIG_SERIAL_MCF=y +CONFIG_SERIAL_MCF_BAUDRATE=115200 +CONFIG_SERIAL_MCF_CONSOLE=y +CONFIG_BOOTPARAM=y +CONFIG_BOOTPARAM_STRING="console=ttyS0,115200" +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_NETDEVICES=y +CONFIG_NET_VENDOR_FREESCALE=y +CONFIG_FEC=y diff --git a/board/qemu/m68k-mcf5208/linux-4.8.config b/board/qemu/m68k-mcf5208/linux-4.8.config deleted file mode 100644 index 09a89d7255..0000000000 --- a/board/qemu/m68k-mcf5208/linux-4.8.config +++ /dev/null @@ -1,28 +0,0 @@ -CONFIG_M68K=y -CONFIG_COLDFIRE=y -# CONFIG_MMU is not set -CONFIG_M520x=y -CONFIG_CLOCK_SET=y -CONFIG_CLOCK_FREQ=66666666 -CONFIG_CLOCK_DIV=1 -CONFIG_M5208EVB=y -CONFIG_FREESCALE=y -CONFIG_RAMBASE=0x40000000 -CONFIG_RAMSIZE=0x0 -CONFIG_VECTORBASE=0x40000000 -CONFIG_KERNELBASE=0x40020000 -CONFIG_4KSTACKS=y -CONFIG_RAMKERNEL=y -CONFIG_BINFMT_FLAT=y -CONFIG_SERIAL_MCF=y -CONFIG_SERIAL_MCF_BAUDRATE=115200 -CONFIG_SERIAL_MCF_CONSOLE=y -CONFIG_BOOTPARAM=y -CONFIG_BOOTPARAM_STRING="console=ttyS0,115200" -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_NETDEVICES=y -CONFIG_NET_VENDOR_FREESCALE=y -CONFIG_FEC=y diff --git a/board/qemu/m68k-mcf5208/readme.txt b/board/qemu/m68k-mcf5208/readme.txt index 00deb2c39c..014a0dc09f 100644 --- a/board/qemu/m68k-mcf5208/readme.txt +++ b/board/qemu/m68k-mcf5208/readme.txt @@ -4,4 +4,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. -Tested with QEMU 2.5.0 +Tested with QEMU 2.9.0 diff --git a/board/qemu/m68k-q800/linux-4.11.config b/board/qemu/m68k-q800/linux-4.11.config new file mode 100644 index 0000000000..44eb70e2d7 --- /dev/null +++ b/board/qemu/m68k-q800/linux-4.11.config @@ -0,0 +1,26 @@ +CONFIG_M68K=y +CONFIG_M68040=y +CONFIG_M68KFPU_EMU=y +CONFIG_MAC=y +CONFIG_MACINTOSH_DRIVERS=y +CONFIG_ADB=y +CONFIG_ADB_MACII=y +CONFIG_TTY=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_NETDEVICES=y +CONFIG_MACSONIC=y +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +CONFIG_SCSI_LOWLEVEL=y +CONFIG_SCSI_MAC_ESP=y +CONFIG_BLK_DEV_SD=y +CONFIG_SERIAL_PMACZILOG=y +CONFIG_SERIAL_PMACZILOG_TTYS=y +CONFIG_SERIAL_PMACZILOG_CONSOLE=y +CONFIG_EXT4_FS=y +CONFIG_TMPFS=y diff --git a/board/qemu/m68k-q800/linux-4.9.config b/board/qemu/m68k-q800/linux-4.9.config deleted file mode 100644 index 44eb70e2d7..0000000000 --- a/board/qemu/m68k-q800/linux-4.9.config +++ /dev/null @@ -1,26 +0,0 @@ -CONFIG_M68K=y -CONFIG_M68040=y -CONFIG_M68KFPU_EMU=y -CONFIG_MAC=y -CONFIG_MACINTOSH_DRIVERS=y -CONFIG_ADB=y -CONFIG_ADB_MACII=y -CONFIG_TTY=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_NETDEVICES=y -CONFIG_MACSONIC=y -CONFIG_SCSI=y -CONFIG_SCSI_DMA=y -CONFIG_SCSI_LOWLEVEL=y -CONFIG_SCSI_MAC_ESP=y -CONFIG_BLK_DEV_SD=y -CONFIG_SERIAL_PMACZILOG=y -CONFIG_SERIAL_PMACZILOG_TTYS=y -CONFIG_SERIAL_PMACZILOG_CONSOLE=y -CONFIG_EXT4_FS=y -CONFIG_TMPFS=y diff --git a/board/qemu/microblazebe-mmu/linux-4.11.config b/board/qemu/microblazebe-mmu/linux-4.11.config new file mode 100644 index 0000000000..7bcd382060 --- /dev/null +++ b/board/qemu/microblazebe-mmu/linux-4.11.config @@ -0,0 +1,20 @@ +CONFIG_SYSVIPC=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_OPT_LIB_ASM=y +CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan3adsp" +CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1 +CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1 +CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1 +CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1 +CONFIG_MMU=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_NETDEVICES=y +CONFIG_XILINX_EMACLITE=y +CONFIG_SERIAL_UARTLITE=y +CONFIG_SERIAL_UARTLITE_CONSOLE=y +# CONFIG_VGA_CONSOLE is not set +CONFIG_TMPFS=y diff --git a/board/qemu/microblazebe-mmu/linux-4.9.config b/board/qemu/microblazebe-mmu/linux-4.9.config deleted file mode 100644 index 7bcd382060..0000000000 --- a/board/qemu/microblazebe-mmu/linux-4.9.config +++ /dev/null @@ -1,20 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_OPT_LIB_ASM=y -CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan3adsp" -CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1 -CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1 -CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1 -CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1 -CONFIG_MMU=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_NETDEVICES=y -CONFIG_XILINX_EMACLITE=y -CONFIG_SERIAL_UARTLITE=y -CONFIG_SERIAL_UARTLITE_CONSOLE=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_TMPFS=y diff --git a/board/qemu/microblazebe-mmu/readme.txt b/board/qemu/microblazebe-mmu/readme.txt index 25fc35ca19..cf0afdaff8 100644 --- a/board/qemu/microblazebe-mmu/readme.txt +++ b/board/qemu/microblazebe-mmu/readme.txt @@ -4,4 +4,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. -Tested with QEMU 2.5.0 +Tested with QEMU 2.9.0 diff --git a/board/qemu/microblazeel-mmu/linux-4.11.config b/board/qemu/microblazeel-mmu/linux-4.11.config new file mode 100644 index 0000000000..a6228280bd --- /dev/null +++ b/board/qemu/microblazeel-mmu/linux-4.11.config @@ -0,0 +1,19 @@ +CONFIG_SYSVIPC=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan3adsp" +CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1 +CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1 +CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1 +CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1 +CONFIG_MMU=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_NETDEVICES=y +CONFIG_XILINX_EMACLITE=y +CONFIG_SERIAL_UARTLITE=y +CONFIG_SERIAL_UARTLITE_CONSOLE=y +# CONFIG_VGA_CONSOLE is not set +CONFIG_TMPFS=y diff --git a/board/qemu/microblazeel-mmu/linux-4.9.config b/board/qemu/microblazeel-mmu/linux-4.9.config deleted file mode 100644 index a6228280bd..0000000000 --- a/board/qemu/microblazeel-mmu/linux-4.9.config +++ /dev/null @@ -1,19 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan3adsp" -CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1 -CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1 -CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1 -CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1 -CONFIG_MMU=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_NETDEVICES=y -CONFIG_XILINX_EMACLITE=y -CONFIG_SERIAL_UARTLITE=y -CONFIG_SERIAL_UARTLITE_CONSOLE=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_TMPFS=y diff --git a/board/qemu/microblazeel-mmu/readme.txt b/board/qemu/microblazeel-mmu/readme.txt index 1a77a56ff3..9edf101afd 100644 --- a/board/qemu/microblazeel-mmu/readme.txt +++ b/board/qemu/microblazeel-mmu/readme.txt @@ -4,4 +4,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. -Tested with QEMU 2.5.0 +Tested with QEMU 2.9.0 diff --git a/board/qemu/mips32r2-malta/linux-4.11.config b/board/qemu/mips32r2-malta/linux-4.11.config new file mode 100644 index 0000000000..3a26ac830f --- /dev/null +++ b/board/qemu/mips32r2-malta/linux-4.11.config @@ -0,0 +1,30 @@ +CONFIG_MIPS_MALTA=y +CONFIG_CPU_MIPS32_R2=y +CONFIG_MIPS_MT_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_SYSVIPC=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_PCI=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IDE=y +CONFIG_BLK_DEV_IDECD=y +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_GENERIC=y +CONFIG_BLK_DEV_PIIX=y +CONFIG_NETDEVICES=y +CONFIG_PCNET32=y +CONFIG_INPUT_EVDEV=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_FB=y +CONFIG_FB_CIRRUS=y +CONFIG_USB=y +CONFIG_USB_UHCI_HCD=y +CONFIG_EXT4_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/mips32r2-malta/linux-4.9.config b/board/qemu/mips32r2-malta/linux-4.9.config deleted file mode 100644 index 3a26ac830f..0000000000 --- a/board/qemu/mips32r2-malta/linux-4.9.config +++ /dev/null @@ -1,30 +0,0 @@ -CONFIG_MIPS_MALTA=y -CONFIG_CPU_MIPS32_R2=y -CONFIG_MIPS_MT_SMP=y -CONFIG_NR_CPUS=2 -CONFIG_SYSVIPC=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_PCI=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECD=y -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_NETDEVICES=y -CONFIG_PCNET32=y -CONFIG_INPUT_EVDEV=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_FB=y -CONFIG_FB_CIRRUS=y -CONFIG_USB=y -CONFIG_USB_UHCI_HCD=y -CONFIG_EXT4_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/mips32r2-malta/readme.txt b/board/qemu/mips32r2-malta/readme.txt index 13f8910b2f..7002ab1d86 100644 --- a/board/qemu/mips32r2-malta/readme.txt +++ b/board/qemu/mips32r2-malta/readme.txt @@ -6,4 +6,4 @@ The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. No keyboard support has been enabled. -Tested with QEMU 2.5.0 +Tested with QEMU 2.9.0 diff --git a/board/qemu/mips32r2el-malta/linux-4.11.config b/board/qemu/mips32r2el-malta/linux-4.11.config new file mode 100644 index 0000000000..79d7352474 --- /dev/null +++ b/board/qemu/mips32r2el-malta/linux-4.11.config @@ -0,0 +1,31 @@ +CONFIG_MIPS_MALTA=y +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_CPU_MIPS32_R2=y +CONFIG_MIPS_MT_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_SYSVIPC=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_PCI=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IDE=y +CONFIG_BLK_DEV_IDECD=y +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_GENERIC=y +CONFIG_BLK_DEV_PIIX=y +CONFIG_NETDEVICES=y +CONFIG_PCNET32=y +CONFIG_INPUT_EVDEV=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_FB=y +CONFIG_FB_CIRRUS=y +CONFIG_USB=y +CONFIG_USB_UHCI_HCD=y +CONFIG_EXT4_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/mips32r2el-malta/linux-4.9.config b/board/qemu/mips32r2el-malta/linux-4.9.config deleted file mode 100644 index 79d7352474..0000000000 --- a/board/qemu/mips32r2el-malta/linux-4.9.config +++ /dev/null @@ -1,31 +0,0 @@ -CONFIG_MIPS_MALTA=y -CONFIG_CPU_LITTLE_ENDIAN=y -CONFIG_CPU_MIPS32_R2=y -CONFIG_MIPS_MT_SMP=y -CONFIG_NR_CPUS=2 -CONFIG_SYSVIPC=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_PCI=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECD=y -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_NETDEVICES=y -CONFIG_PCNET32=y -CONFIG_INPUT_EVDEV=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_FB=y -CONFIG_FB_CIRRUS=y -CONFIG_USB=y -CONFIG_USB_UHCI_HCD=y -CONFIG_EXT4_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/mips32r2el-malta/readme.txt b/board/qemu/mips32r2el-malta/readme.txt index 5c4bbda6a4..bfc9c49d5a 100644 --- a/board/qemu/mips32r2el-malta/readme.txt +++ b/board/qemu/mips32r2el-malta/readme.txt @@ -6,4 +6,4 @@ The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. No keyboard support has been enabled. -Tested with QEMU 2.5.0 +Tested with QEMU 2.9.0 diff --git a/board/qemu/mips32r6-malta/linux-4.11.config b/board/qemu/mips32r6-malta/linux-4.11.config new file mode 100644 index 0000000000..d559676615 --- /dev/null +++ b/board/qemu/mips32r6-malta/linux-4.11.config @@ -0,0 +1,30 @@ +CONFIG_MIPS_MALTA=y +CONFIG_CPU_MIPS32_R6=y +CONFIG_MIPS_MT_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_SYSVIPC=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_PCI=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IDE=y +CONFIG_BLK_DEV_IDECD=y +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_GENERIC=y +CONFIG_BLK_DEV_PIIX=y +CONFIG_NETDEVICES=y +CONFIG_PCNET32=y +CONFIG_INPUT_EVDEV=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_FB=y +CONFIG_FB_CIRRUS=y +CONFIG_USB=y +CONFIG_USB_UHCI_HCD=y +CONFIG_EXT4_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/mips32r6-malta/linux-4.9.config b/board/qemu/mips32r6-malta/linux-4.9.config deleted file mode 100644 index d559676615..0000000000 --- a/board/qemu/mips32r6-malta/linux-4.9.config +++ /dev/null @@ -1,30 +0,0 @@ -CONFIG_MIPS_MALTA=y -CONFIG_CPU_MIPS32_R6=y -CONFIG_MIPS_MT_SMP=y -CONFIG_NR_CPUS=2 -CONFIG_SYSVIPC=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_PCI=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECD=y -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_NETDEVICES=y -CONFIG_PCNET32=y -CONFIG_INPUT_EVDEV=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_FB=y -CONFIG_FB_CIRRUS=y -CONFIG_USB=y -CONFIG_USB_UHCI_HCD=y -CONFIG_EXT4_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/mips32r6-malta/readme.txt b/board/qemu/mips32r6-malta/readme.txt index 107c47d8d2..7d79c6602c 100644 --- a/board/qemu/mips32r6-malta/readme.txt +++ b/board/qemu/mips32r6-malta/readme.txt @@ -4,4 +4,4 @@ qemu-system-mips -M malta -cpu mips32r6-generic -kernel output/images/vmlinux -d The login prompt will appear in the terminal that started Qemu. -Tested with QEMU 2.6.0 +Tested with QEMU 2.9.0 diff --git a/board/qemu/mips32r6el-malta/linux-4.11.config b/board/qemu/mips32r6el-malta/linux-4.11.config new file mode 100644 index 0000000000..d559676615 --- /dev/null +++ b/board/qemu/mips32r6el-malta/linux-4.11.config @@ -0,0 +1,30 @@ +CONFIG_MIPS_MALTA=y +CONFIG_CPU_MIPS32_R6=y +CONFIG_MIPS_MT_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_SYSVIPC=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_PCI=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IDE=y +CONFIG_BLK_DEV_IDECD=y +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_GENERIC=y +CONFIG_BLK_DEV_PIIX=y +CONFIG_NETDEVICES=y +CONFIG_PCNET32=y +CONFIG_INPUT_EVDEV=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_FB=y +CONFIG_FB_CIRRUS=y +CONFIG_USB=y +CONFIG_USB_UHCI_HCD=y +CONFIG_EXT4_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/mips32r6el-malta/linux-4.9.config b/board/qemu/mips32r6el-malta/linux-4.9.config deleted file mode 100644 index d559676615..0000000000 --- a/board/qemu/mips32r6el-malta/linux-4.9.config +++ /dev/null @@ -1,30 +0,0 @@ -CONFIG_MIPS_MALTA=y -CONFIG_CPU_MIPS32_R6=y -CONFIG_MIPS_MT_SMP=y -CONFIG_NR_CPUS=2 -CONFIG_SYSVIPC=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_PCI=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECD=y -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_NETDEVICES=y -CONFIG_PCNET32=y -CONFIG_INPUT_EVDEV=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_FB=y -CONFIG_FB_CIRRUS=y -CONFIG_USB=y -CONFIG_USB_UHCI_HCD=y -CONFIG_EXT4_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/mips32r6el-malta/readme.txt b/board/qemu/mips32r6el-malta/readme.txt index e29115f702..78f8350506 100644 --- a/board/qemu/mips32r6el-malta/readme.txt +++ b/board/qemu/mips32r6el-malta/readme.txt @@ -4,4 +4,4 @@ qemu-system-mipsel -M malta -cpu mips32r6-generic -kernel output/images/vmlinux The login prompt will appear in the terminal that started Qemu. -Tested with QEMU 2.6.0 +Tested with QEMU 2.9.0 diff --git a/board/qemu/mips64-malta/linux-4.11.config b/board/qemu/mips64-malta/linux-4.11.config new file mode 100644 index 0000000000..cd0b560634 --- /dev/null +++ b/board/qemu/mips64-malta/linux-4.11.config @@ -0,0 +1,34 @@ +CONFIG_MIPS_MALTA=y +CONFIG_CPU_MIPS64_R1=y +CONFIG_64BIT=y +CONFIG_MIPS_MT_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_SYSVIPC=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_PCI=y +CONFIG_MIPS32_COMPAT=y +CONFIG_MIPS32_O32=y +CONFIG_MIPS32_N32=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IDE=y +CONFIG_BLK_DEV_IDECD=y +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_GENERIC=y +CONFIG_BLK_DEV_PIIX=y +CONFIG_NETDEVICES=y +CONFIG_PCNET32=y +CONFIG_INPUT_EVDEV=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_FB=y +CONFIG_FB_CIRRUS=y +CONFIG_USB=y +CONFIG_USB_UHCI_HCD=y +CONFIG_EXT4_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/mips64-malta/linux-4.8.config b/board/qemu/mips64-malta/linux-4.8.config deleted file mode 100644 index cd0b560634..0000000000 --- a/board/qemu/mips64-malta/linux-4.8.config +++ /dev/null @@ -1,34 +0,0 @@ -CONFIG_MIPS_MALTA=y -CONFIG_CPU_MIPS64_R1=y -CONFIG_64BIT=y -CONFIG_MIPS_MT_SMP=y -CONFIG_NR_CPUS=2 -CONFIG_SYSVIPC=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_PCI=y -CONFIG_MIPS32_COMPAT=y -CONFIG_MIPS32_O32=y -CONFIG_MIPS32_N32=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECD=y -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_NETDEVICES=y -CONFIG_PCNET32=y -CONFIG_INPUT_EVDEV=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_FB=y -CONFIG_FB_CIRRUS=y -CONFIG_USB=y -CONFIG_USB_UHCI_HCD=y -CONFIG_EXT4_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/mips64-malta/readme.txt b/board/qemu/mips64-malta/readme.txt index a89985ddea..8a732101a8 100644 --- a/board/qemu/mips64-malta/readme.txt +++ b/board/qemu/mips64-malta/readme.txt @@ -5,4 +5,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. -Tested with QEMU 2.5.0 +Tested with QEMU 2.9.0 diff --git a/board/qemu/mips64el-malta/linux-4.11.config b/board/qemu/mips64el-malta/linux-4.11.config new file mode 100644 index 0000000000..c6b46d4d7f --- /dev/null +++ b/board/qemu/mips64el-malta/linux-4.11.config @@ -0,0 +1,35 @@ +CONFIG_MIPS_MALTA=y +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_CPU_MIPS64_R1=y +CONFIG_64BIT=y +CONFIG_MIPS_MT_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_SYSVIPC=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_PCI=y +CONFIG_MIPS32_COMPAT=y +CONFIG_MIPS32_O32=y +CONFIG_MIPS32_N32=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IDE=y +CONFIG_BLK_DEV_IDECD=y +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_GENERIC=y +CONFIG_BLK_DEV_PIIX=y +CONFIG_NETDEVICES=y +CONFIG_PCNET32=y +CONFIG_INPUT_EVDEV=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_FB=y +CONFIG_FB_CIRRUS=y +CONFIG_USB=y +CONFIG_USB_UHCI_HCD=y +CONFIG_EXT4_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/mips64el-malta/linux-4.9.config b/board/qemu/mips64el-malta/linux-4.9.config deleted file mode 100644 index c6b46d4d7f..0000000000 --- a/board/qemu/mips64el-malta/linux-4.9.config +++ /dev/null @@ -1,35 +0,0 @@ -CONFIG_MIPS_MALTA=y -CONFIG_CPU_LITTLE_ENDIAN=y -CONFIG_CPU_MIPS64_R1=y -CONFIG_64BIT=y -CONFIG_MIPS_MT_SMP=y -CONFIG_NR_CPUS=2 -CONFIG_SYSVIPC=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_PCI=y -CONFIG_MIPS32_COMPAT=y -CONFIG_MIPS32_O32=y -CONFIG_MIPS32_N32=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECD=y -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_NETDEVICES=y -CONFIG_PCNET32=y -CONFIG_INPUT_EVDEV=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_FB=y -CONFIG_FB_CIRRUS=y -CONFIG_USB=y -CONFIG_USB_UHCI_HCD=y -CONFIG_EXT4_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/mips64r6-malta/linux-4.11.config b/board/qemu/mips64r6-malta/linux-4.11.config new file mode 100644 index 0000000000..0ebfdbdb05 --- /dev/null +++ b/board/qemu/mips64r6-malta/linux-4.11.config @@ -0,0 +1,34 @@ +CONFIG_MIPS_MALTA=y +CONFIG_CPU_MIPS64_R6=y +CONFIG_64BIT=y +CONFIG_MIPS_MT_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_SYSVIPC=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_PCI=y +CONFIG_MIPS32_COMPAT=y +CONFIG_MIPS32_O32=y +CONFIG_MIPS32_N32=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IDE=y +CONFIG_BLK_DEV_IDECD=y +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_GENERIC=y +CONFIG_BLK_DEV_PIIX=y +CONFIG_NETDEVICES=y +CONFIG_PCNET32=y +CONFIG_INPUT_EVDEV=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_FB=y +CONFIG_FB_CIRRUS=y +CONFIG_USB=y +CONFIG_USB_UHCI_HCD=y +CONFIG_EXT4_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/mips64r6-malta/linux-4.9.config b/board/qemu/mips64r6-malta/linux-4.9.config deleted file mode 100644 index 0ebfdbdb05..0000000000 --- a/board/qemu/mips64r6-malta/linux-4.9.config +++ /dev/null @@ -1,34 +0,0 @@ -CONFIG_MIPS_MALTA=y -CONFIG_CPU_MIPS64_R6=y -CONFIG_64BIT=y -CONFIG_MIPS_MT_SMP=y -CONFIG_NR_CPUS=2 -CONFIG_SYSVIPC=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_PCI=y -CONFIG_MIPS32_COMPAT=y -CONFIG_MIPS32_O32=y -CONFIG_MIPS32_N32=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECD=y -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_NETDEVICES=y -CONFIG_PCNET32=y -CONFIG_INPUT_EVDEV=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_FB=y -CONFIG_FB_CIRRUS=y -CONFIG_USB=y -CONFIG_USB_UHCI_HCD=y -CONFIG_EXT4_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/mips64r6el-malta/linux-4.11.config b/board/qemu/mips64r6el-malta/linux-4.11.config new file mode 100644 index 0000000000..0ebfdbdb05 --- /dev/null +++ b/board/qemu/mips64r6el-malta/linux-4.11.config @@ -0,0 +1,34 @@ +CONFIG_MIPS_MALTA=y +CONFIG_CPU_MIPS64_R6=y +CONFIG_64BIT=y +CONFIG_MIPS_MT_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_SYSVIPC=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_PCI=y +CONFIG_MIPS32_COMPAT=y +CONFIG_MIPS32_O32=y +CONFIG_MIPS32_N32=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IDE=y +CONFIG_BLK_DEV_IDECD=y +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_GENERIC=y +CONFIG_BLK_DEV_PIIX=y +CONFIG_NETDEVICES=y +CONFIG_PCNET32=y +CONFIG_INPUT_EVDEV=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_FB=y +CONFIG_FB_CIRRUS=y +CONFIG_USB=y +CONFIG_USB_UHCI_HCD=y +CONFIG_EXT4_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/mips64r6el-malta/linux-4.9.config b/board/qemu/mips64r6el-malta/linux-4.9.config deleted file mode 100644 index 0ebfdbdb05..0000000000 --- a/board/qemu/mips64r6el-malta/linux-4.9.config +++ /dev/null @@ -1,34 +0,0 @@ -CONFIG_MIPS_MALTA=y -CONFIG_CPU_MIPS64_R6=y -CONFIG_64BIT=y -CONFIG_MIPS_MT_SMP=y -CONFIG_NR_CPUS=2 -CONFIG_SYSVIPC=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_PCI=y -CONFIG_MIPS32_COMPAT=y -CONFIG_MIPS32_O32=y -CONFIG_MIPS32_N32=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECD=y -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_NETDEVICES=y -CONFIG_PCNET32=y -CONFIG_INPUT_EVDEV=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_FB=y -CONFIG_FB_CIRRUS=y -CONFIG_USB=y -CONFIG_USB_UHCI_HCD=y -CONFIG_EXT4_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/mips64r6el-malta/readme.txt b/board/qemu/mips64r6el-malta/readme.txt index b1dc23a22f..9250cf3791 100644 --- a/board/qemu/mips64r6el-malta/readme.txt +++ b/board/qemu/mips64r6el-malta/readme.txt @@ -4,7 +4,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. -Tested with QEMU 2.6.0 - -Might work with 2.6.0 by changing the -cpu entry to MIPS64R6-generic -since the naming was updated and the old name removed in 2.7.0 +Tested with QEMU 2.9.0 diff --git a/board/qemu/nios2-10m50/linux-4.11.fragment b/board/qemu/nios2-10m50/linux-4.11.fragment new file mode 100644 index 0000000000..76c864f5c3 --- /dev/null +++ b/board/qemu/nios2-10m50/linux-4.11.fragment @@ -0,0 +1,3 @@ +# Embed the DTB in the kernel image +CONFIG_NIOS2_DTB_SOURCE_BOOL=y +CONFIG_NIOS2_DTB_SOURCE="arch/nios2/boot/dts/10m50_devboard.dts" diff --git a/board/qemu/nios2-10m50/linux-4.9.fragment b/board/qemu/nios2-10m50/linux-4.9.fragment deleted file mode 100644 index 76c864f5c3..0000000000 --- a/board/qemu/nios2-10m50/linux-4.9.fragment +++ /dev/null @@ -1,3 +0,0 @@ -# Embed the DTB in the kernel image -CONFIG_NIOS2_DTB_SOURCE_BOOL=y -CONFIG_NIOS2_DTB_SOURCE="arch/nios2/boot/dts/10m50_devboard.dts" diff --git a/board/qemu/nios2-10m50/readme.txt b/board/qemu/nios2-10m50/readme.txt index 978ba95cbe..f7dee370f7 100644 --- a/board/qemu/nios2-10m50/readme.txt +++ b/board/qemu/nios2-10m50/readme.txt @@ -4,6 +4,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. -Tested with the upcoming QEMU 2.9.0 [1] - -[1] http://git.qemu.org/?p=qemu.git;h=ae5045ae5b2bbd8ce1335d1b05f9ecacca83a6cf +Tested with QEMU 2.9.0. diff --git a/board/qemu/or1k/linux-4.11.config b/board/qemu/or1k/linux-4.11.config new file mode 100644 index 0000000000..0a817b1e7f --- /dev/null +++ b/board/qemu/or1k/linux-4.11.config @@ -0,0 +1,30 @@ +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="${BR_BINARIES_DIR}/rootfs.cpio" +CONFIG_OPENRISC_BUILTIN_DTB="or1ksim" +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_IPV6 is not set +# CONFIG_WIRELESS is not set +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_TMPFS=y +CONFIG_NETDEVICES=y +CONFIG_ETHOC=y +# CONFIG_WLAN is not set +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_HWMON is not set +# CONFIG_VGA_CONSOLE is not set +# CONFIG_USB_SUPPORT is not set diff --git a/board/qemu/or1k/linux-4.9.config b/board/qemu/or1k/linux-4.9.config deleted file mode 100644 index 0a817b1e7f..0000000000 --- a/board/qemu/or1k/linux-4.9.config +++ /dev/null @@ -1,30 +0,0 @@ -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="${BR_BINARIES_DIR}/rootfs.cpio" -CONFIG_OPENRISC_BUILTIN_DTB="or1ksim" -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_IPV6 is not set -# CONFIG_WIRELESS is not set -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -CONFIG_TMPFS=y -CONFIG_NETDEVICES=y -CONFIG_ETHOC=y -# CONFIG_WLAN is not set -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_OF_PLATFORM=y -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_SUPPORT is not set diff --git a/board/qemu/or1k/patches/linux/0001-ld-or1k.patch b/board/qemu/or1k/patches/linux/0001-ld-or1k.patch deleted file mode 100644 index aba2463c5f..0000000000 --- a/board/qemu/or1k/patches/linux/0001-ld-or1k.patch +++ /dev/null @@ -1,16 +0,0 @@ -OpenRISC arch name was in the beginning or32 - -Signed-off-by: Waldemar Brodkorb - -diff -Nur linux-4.4.5.orig/arch/openrisc/kernel/vmlinux.lds.S linux-4.4.5/arch/openrisc/kernel/vmlinux.lds.S ---- linux-4.4.5.orig/arch/openrisc/kernel/vmlinux.lds.S 2016-03-10 00:35:58.000000000 +0100 -+++ linux-4.4.5/arch/openrisc/kernel/vmlinux.lds.S 2016-03-16 09:21:07.933535532 +0100 -@@ -30,7 +30,7 @@ - #include - #include - --OUTPUT_FORMAT("elf32-or32", "elf32-or32", "elf32-or32") -+OUTPUT_FORMAT("elf32-or1k", "elf32-or1k", "elf32-or1k") - jiffies = jiffies_64 + 4; - - SECTIONS diff --git a/board/qemu/or1k/patches/linux/0002-kallsyms.patch b/board/qemu/or1k/patches/linux/0002-kallsyms.patch deleted file mode 100644 index e788a7a9b4..0000000000 --- a/board/qemu/or1k/patches/linux/0002-kallsyms.patch +++ /dev/null @@ -1,25 +0,0 @@ -From: https://lkml.org/lkml/2016/12/31/13 - -The build robot reports: - - .tmp_kallsyms1.o: In function `kallsyms_relative_base': ->> (.rodata+0x8a18): undefined reference to `_text' - -This is when using 'make alldefconfig'. Adding this _text symbol to mark -the start of the kernel as in other architecture fixes this. - -Signed-off-by: Stafford Horne -Signed-off-by: Waldemar Brodkorb - -diff -Nur linux-4.9.orig/arch/openrisc/kernel/vmlinux.lds.S linux-4.9/arch/openrisc/kernel/vmlinux.lds.S ---- linux-4.9.orig/arch/openrisc/kernel/vmlinux.lds.S 2016-12-11 20:17:54.000000000 +0100 -+++ linux-4.9/arch/openrisc/kernel/vmlinux.lds.S 2017-01-01 12:13:43.039107518 +0100 -@@ -38,6 +38,8 @@ - /* Read-only sections, merged into text segment: */ - . = LOAD_BASE ; - -+ _text = .; -+ - /* _s_kernel_ro must be page aligned */ - . = ALIGN(PAGE_SIZE); - _s_kernel_ro = .; diff --git a/board/qemu/or1k/readme.txt b/board/qemu/or1k/readme.txt index 53c66ad989..a04314e750 100644 --- a/board/qemu/or1k/readme.txt +++ b/board/qemu/or1k/readme.txt @@ -1,9 +1,9 @@ Run the emulation with: - qemu-system-or32 -kernel output/images/vmlinux -nographic + qemu-system-or1k -kernel output/images/vmlinux -nographic The login prompt will appear in the terminal that started Qemu. Ethernet support is not working, yet. -Tested with QEMU 2.8.0. +Tested with QEMU 2.9.0. diff --git a/board/qemu/ppc-g3beige/linux-4.11.config b/board/qemu/ppc-g3beige/linux-4.11.config new file mode 100644 index 0000000000..7994553544 --- /dev/null +++ b/board/qemu/ppc-g3beige/linux-4.11.config @@ -0,0 +1,25 @@ +CONFIG_ALTIVEC=y +CONFIG_SYSVIPC=y +CONFIG_HIGHMEM=y +CONFIG_YENTA=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IDE=y +CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_CMD64X=y +CONFIG_BLK_DEV_IDE_PMAC=y +CONFIG_ADB=y +CONFIG_ADB_CUDA=y +CONFIG_ADB_PMU=y +CONFIG_NETDEVICES=y +CONFIG_PCNET32=y +CONFIG_8139CP=y +CONFIG_SERIAL_PMACZILOG=y +CONFIG_SERIAL_PMACZILOG_TTYS=y +CONFIG_SERIAL_PMACZILOG_CONSOLE=y +CONFIG_EXT4_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_BOOTX_TEXT=y diff --git a/board/qemu/ppc-g3beige/linux-4.9.config b/board/qemu/ppc-g3beige/linux-4.9.config deleted file mode 100644 index 7994553544..0000000000 --- a/board/qemu/ppc-g3beige/linux-4.9.config +++ /dev/null @@ -1,25 +0,0 @@ -CONFIG_ALTIVEC=y -CONFIG_SYSVIPC=y -CONFIG_HIGHMEM=y -CONFIG_YENTA=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_CMD64X=y -CONFIG_BLK_DEV_IDE_PMAC=y -CONFIG_ADB=y -CONFIG_ADB_CUDA=y -CONFIG_ADB_PMU=y -CONFIG_NETDEVICES=y -CONFIG_PCNET32=y -CONFIG_8139CP=y -CONFIG_SERIAL_PMACZILOG=y -CONFIG_SERIAL_PMACZILOG_TTYS=y -CONFIG_SERIAL_PMACZILOG_CONSOLE=y -CONFIG_EXT4_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_BOOTX_TEXT=y diff --git a/board/qemu/ppc-g3beige/readme.txt b/board/qemu/ppc-g3beige/readme.txt index 3bd88a6e39..42c97a0c14 100644 --- a/board/qemu/ppc-g3beige/readme.txt +++ b/board/qemu/ppc-g3beige/readme.txt @@ -5,4 +5,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. -Tested with QEMU 2.5.0 +Tested with QEMU 2.9.0 diff --git a/board/qemu/ppc-mpc8544ds/linux-4.11.config b/board/qemu/ppc-mpc8544ds/linux-4.11.config new file mode 100644 index 0000000000..b36847c93d --- /dev/null +++ b/board/qemu/ppc-mpc8544ds/linux-4.11.config @@ -0,0 +1,38 @@ +CONFIG_PPC_85xx=y +CONFIG_PHYS_64BIT=y +CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="${BR_BINARIES_DIR}/rootfs.cpio" +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MPC8540_ADS=y +CONFIG_MPC85xx_DS=y +CONFIG_HIGHMEM=y +CONFIG_MATH_EMULATION=y +CONFIG_PCI=y +CONFIG_PCIEPORTBUS=y +CONFIG_PCI_MSI=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_NETDEVICES=y +CONFIG_E1000=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=6 +CONFIG_SERIAL_8250_RUNTIME_UARTS=6 +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_FSL=y +CONFIG_USB_OHCI_HCD=y +CONFIG_TMPFS=y diff --git a/board/qemu/ppc-mpc8544ds/linux-4.9.config b/board/qemu/ppc-mpc8544ds/linux-4.9.config deleted file mode 100644 index b36847c93d..0000000000 --- a/board/qemu/ppc-mpc8544ds/linux-4.9.config +++ /dev/null @@ -1,38 +0,0 @@ -CONFIG_PPC_85xx=y -CONFIG_PHYS_64BIT=y -CONFIG_SYSVIPC=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="${BR_BINARIES_DIR}/rootfs.cpio" -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MPC8540_ADS=y -CONFIG_MPC85xx_DS=y -CONFIG_HIGHMEM=y -CONFIG_MATH_EMULATION=y -CONFIG_PCI=y -CONFIG_PCIEPORTBUS=y -CONFIG_PCI_MSI=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -CONFIG_NETDEVICES=y -CONFIG_E1000=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=6 -CONFIG_SERIAL_8250_RUNTIME_UARTS=6 -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_DETECT_IRQ=y -CONFIG_SERIAL_8250_RSA=y -CONFIG_USB=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_FSL=y -CONFIG_USB_OHCI_HCD=y -CONFIG_TMPFS=y diff --git a/board/qemu/ppc-mpc8544ds/readme.txt b/board/qemu/ppc-mpc8544ds/readme.txt index d8f31cbc94..0008c84b20 100644 --- a/board/qemu/ppc-mpc8544ds/readme.txt +++ b/board/qemu/ppc-mpc8544ds/readme.txt @@ -4,4 +4,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. -Tested with QEMU 2.5.0 +Tested with QEMU 2.9.0 diff --git a/board/qemu/ppc64-pseries/readme.txt b/board/qemu/ppc64-pseries/readme.txt index 94fa228b4b..7cc0c67d61 100644 --- a/board/qemu/ppc64-pseries/readme.txt +++ b/board/qemu/ppc64-pseries/readme.txt @@ -4,4 +4,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. -Tested with QEMU 2.5.0 +Tested with QEMU 2.9.0 diff --git a/board/qemu/sh4-r2d/linux-4.11.config b/board/qemu/sh4-r2d/linux-4.11.config new file mode 100644 index 0000000000..a3d6544549 --- /dev/null +++ b/board/qemu/sh4-r2d/linux-4.11.config @@ -0,0 +1,38 @@ +CONFIG_SYSVIPC=y +CONFIG_MODULES=y +CONFIG_CPU_SUBTYPE_SH7751R=y +CONFIG_MEMORY_START=0x0c000000 +CONFIG_FLATMEM_MANUAL=y +CONFIG_SH_RTS7751R2D=y +CONFIG_RTS7751R2D_PLUS=y +CONFIG_HEARTBEAT=y +CONFIG_PCI=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_BLK_DEV_SD=y +CONFIG_ATA=y +CONFIG_PATA_PLATFORM=y +CONFIG_NETDEVICES=y +CONFIG_8139CP=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SPI=y +CONFIG_SPI_SH_SCI=y +CONFIG_MFD_SM501=y +CONFIG_FB=y +CONFIG_FB_SH_MOBILE_LCDC=y +CONFIG_FB_SH_MOBILE_HDMI=y +CONFIG_FB_SM501=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_LOGO=y +CONFIG_SOUND=y +CONFIG_SND_YMFPCI=y +CONFIG_SOUND_PRIME=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_R9701=y +CONFIG_EXT4_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/sh4-r2d/linux-4.9.config b/board/qemu/sh4-r2d/linux-4.9.config deleted file mode 100644 index a3d6544549..0000000000 --- a/board/qemu/sh4-r2d/linux-4.9.config +++ /dev/null @@ -1,38 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_MODULES=y -CONFIG_CPU_SUBTYPE_SH7751R=y -CONFIG_MEMORY_START=0x0c000000 -CONFIG_FLATMEM_MANUAL=y -CONFIG_SH_RTS7751R2D=y -CONFIG_RTS7751R2D_PLUS=y -CONFIG_HEARTBEAT=y -CONFIG_PCI=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_BLK_DEV_SD=y -CONFIG_ATA=y -CONFIG_PATA_PLATFORM=y -CONFIG_NETDEVICES=y -CONFIG_8139CP=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_SH_SCI=y -CONFIG_SERIAL_SH_SCI_CONSOLE=y -CONFIG_SPI=y -CONFIG_SPI_SH_SCI=y -CONFIG_MFD_SM501=y -CONFIG_FB=y -CONFIG_FB_SH_MOBILE_LCDC=y -CONFIG_FB_SH_MOBILE_HDMI=y -CONFIG_FB_SM501=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_LOGO=y -CONFIG_SOUND=y -CONFIG_SND_YMFPCI=y -CONFIG_SOUND_PRIME=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_R9701=y -CONFIG_EXT4_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/sh4eb-r2d/linux-4.11.config b/board/qemu/sh4eb-r2d/linux-4.11.config new file mode 100644 index 0000000000..6ead626c41 --- /dev/null +++ b/board/qemu/sh4eb-r2d/linux-4.11.config @@ -0,0 +1,38 @@ +CONFIG_SYSVIPC=y +CONFIG_MODULES=y +CONFIG_CPU_SUBTYPE_SH7751R=y +CONFIG_MEMORY_START=0x0c000000 +CONFIG_FLATMEM_MANUAL=y +CONFIG_CPU_BIG_ENDIAN=y +CONFIG_SH_RTS7751R2D=y +CONFIG_RTS7751R2D_PLUS=y +CONFIG_HEARTBEAT=y +CONFIG_PCI=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_BLK_DEV_SD=y +CONFIG_ATA=y +CONFIG_PATA_PLATFORM=y +CONFIG_NETDEVICES=y +CONFIG_8139CP=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SPI=y +CONFIG_SPI_SH_SCI=y +CONFIG_MFD_SM501=y +CONFIG_FB=y +CONFIG_FB_SH_MOBILE_LCDC=y +CONFIG_FB_SH_MOBILE_HDMI=y +CONFIG_FB_SM501=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_LOGO=y +CONFIG_SND_YMFPCI=y +CONFIG_SOUND_PRIME=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_R9701=y +CONFIG_EXT4_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/sh4eb-r2d/linux-4.9.config b/board/qemu/sh4eb-r2d/linux-4.9.config deleted file mode 100644 index 6ead626c41..0000000000 --- a/board/qemu/sh4eb-r2d/linux-4.9.config +++ /dev/null @@ -1,38 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_MODULES=y -CONFIG_CPU_SUBTYPE_SH7751R=y -CONFIG_MEMORY_START=0x0c000000 -CONFIG_FLATMEM_MANUAL=y -CONFIG_CPU_BIG_ENDIAN=y -CONFIG_SH_RTS7751R2D=y -CONFIG_RTS7751R2D_PLUS=y -CONFIG_HEARTBEAT=y -CONFIG_PCI=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_BLK_DEV_SD=y -CONFIG_ATA=y -CONFIG_PATA_PLATFORM=y -CONFIG_NETDEVICES=y -CONFIG_8139CP=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_SH_SCI=y -CONFIG_SERIAL_SH_SCI_CONSOLE=y -CONFIG_SPI=y -CONFIG_SPI_SH_SCI=y -CONFIG_MFD_SM501=y -CONFIG_FB=y -CONFIG_FB_SH_MOBILE_LCDC=y -CONFIG_FB_SH_MOBILE_HDMI=y -CONFIG_FB_SM501=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_LOGO=y -CONFIG_SND_YMFPCI=y -CONFIG_SOUND_PRIME=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_R9701=y -CONFIG_EXT4_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/sparc-ss10/linux-4.11.config b/board/qemu/sparc-ss10/linux-4.11.config new file mode 100644 index 0000000000..cb8d01dc02 --- /dev/null +++ b/board/qemu/sparc-ss10/linux-4.11.config @@ -0,0 +1,31 @@ +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_PCI=y +CONFIG_SUN_OPENPROMFS=m +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +# CONFIG_WIRELESS is not set +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_BLK_DEV_SR=y +CONFIG_CHR_DEV_SG=y +CONFIG_SCSI_SUNESP=y +CONFIG_NETDEVICES=y +CONFIG_SUNLANCE=y +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=y +CONFIG_KEYBOARD_SUNKBD=y +CONFIG_MOUSE_SERIAL=y +CONFIG_SERIAL_SUNZILOG=y +CONFIG_SERIAL_SUNZILOG_CONSOLE=y +CONFIG_SERIAL_SUNSU=y +CONFIG_SERIAL_SUNSU_CONSOLE=y +CONFIG_SUN_OPENPROMIO=m +CONFIG_EXT4_FS=y +CONFIG_ISO9660_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/sparc-ss10/linux-4.9.config b/board/qemu/sparc-ss10/linux-4.9.config deleted file mode 100644 index cb8d01dc02..0000000000 --- a/board/qemu/sparc-ss10/linux-4.9.config +++ /dev/null @@ -1,31 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_PCI=y -CONFIG_SUN_OPENPROMFS=m -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_WIRELESS is not set -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_BLK_DEV_SR=y -CONFIG_CHR_DEV_SG=y -CONFIG_SCSI_SUNESP=y -CONFIG_NETDEVICES=y -CONFIG_SUNLANCE=y -# CONFIG_WLAN is not set -CONFIG_INPUT_EVDEV=y -CONFIG_KEYBOARD_SUNKBD=y -CONFIG_MOUSE_SERIAL=y -CONFIG_SERIAL_SUNZILOG=y -CONFIG_SERIAL_SUNZILOG_CONSOLE=y -CONFIG_SERIAL_SUNSU=y -CONFIG_SERIAL_SUNSU_CONSOLE=y -CONFIG_SUN_OPENPROMIO=m -CONFIG_EXT4_FS=y -CONFIG_ISO9660_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/sparc-ss10/readme.txt b/board/qemu/sparc-ss10/readme.txt index 5a07ee0002..0ce461d2ea 100644 --- a/board/qemu/sparc-ss10/readme.txt +++ b/board/qemu/sparc-ss10/readme.txt @@ -4,4 +4,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. -Tested with QEMU 2.5.0 +Tested with QEMU 2.9.0 diff --git a/board/qemu/sparc64-sun4u/linux-4.11.config b/board/qemu/sparc64-sun4u/linux-4.11.config new file mode 100644 index 0000000000..0e1e16879d --- /dev/null +++ b/board/qemu/sparc64-sun4u/linux-4.11.config @@ -0,0 +1,25 @@ +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_NO_HZ_IDLE=y +CONFIG_EMBEDDED=y +CONFIG_MODULES=y +CONFIG_PCI=y +CONFIG_SUN_OPENPROMFS=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_BLK_DEV_SD=y +CONFIG_ATA=y +CONFIG_PATA_CMD64X=y +CONFIG_NETDEVICES=y +CONFIG_E1000=y +CONFIG_SERIAL_SUNSU=y +CONFIG_SERIAL_SUNSU_CONSOLE=y +CONFIG_EXT4_FS=y +CONFIG_TMPFS=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="utf-8" +CONFIG_MAGIC_SYSRQ=y diff --git a/board/qemu/sparc64-sun4u/linux-4.9.config b/board/qemu/sparc64-sun4u/linux-4.9.config deleted file mode 100644 index 0e1e16879d..0000000000 --- a/board/qemu/sparc64-sun4u/linux-4.9.config +++ /dev/null @@ -1,25 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_NO_HZ_IDLE=y -CONFIG_EMBEDDED=y -CONFIG_MODULES=y -CONFIG_PCI=y -CONFIG_SUN_OPENPROMFS=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -CONFIG_BLK_DEV_SD=y -CONFIG_ATA=y -CONFIG_PATA_CMD64X=y -CONFIG_NETDEVICES=y -CONFIG_E1000=y -CONFIG_SERIAL_SUNSU=y -CONFIG_SERIAL_SUNSU_CONSOLE=y -CONFIG_EXT4_FS=y -CONFIG_TMPFS=y -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="utf-8" -CONFIG_MAGIC_SYSRQ=y diff --git a/board/qemu/sparc64-sun4u/readme.txt b/board/qemu/sparc64-sun4u/readme.txt index aaf96c3572..adfff7089e 100644 --- a/board/qemu/sparc64-sun4u/readme.txt +++ b/board/qemu/sparc64-sun4u/readme.txt @@ -4,4 +4,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. -Tested with QEMU 2.5.0 +Tested with QEMU 2.9.0 diff --git a/board/qemu/x86/linux-4.11.config b/board/qemu/x86/linux-4.11.config new file mode 100644 index 0000000000..e3bd1454e6 --- /dev/null +++ b/board/qemu/x86/linux-4.11.config @@ -0,0 +1,45 @@ +CONFIG_SYSVIPC=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_SMP=y +CONFIG_HYPERVISOR_GUEST=y +CONFIG_PARAVIRT=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_VIRTIO_BLK=y +CONFIG_BLK_DEV_SD=y +CONFIG_SCSI_VIRTIO=y +CONFIG_ATA=y +CONFIG_ATA_PIIX=y +CONFIG_NETDEVICES=y +CONFIG_VIRTIO_NET=y +CONFIG_NE2K_PCI=y +CONFIG_8139CP=y +CONFIG_INPUT_EVDEV=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_VIRTIO_CONSOLE=y +CONFIG_HW_RANDOM_VIRTIO=m +CONFIG_DRM=y +CONFIG_DRM_BOCHS=y +CONFIG_DRM_QXL=y +CONFIG_DRM_VIRTIO_GPU=y +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_HDA_INTEL=y +CONFIG_SND_HDA_GENERIC=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_UHCI_HCD=y +CONFIG_USB_STORAGE=y +CONFIG_VIRTIO_PCI=y +CONFIG_VIRTIO_BALLOON=y +CONFIG_VIRTIO_INPUT=y +CONFIG_VIRTIO_MMIO=y +CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y +CONFIG_EXT4_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/x86/linux-4.9.config b/board/qemu/x86/linux-4.9.config deleted file mode 120000 index 44b2fa1270..0000000000 --- a/board/qemu/x86/linux-4.9.config +++ /dev/null @@ -1 +0,0 @@ -../x86_64/linux-4.9.config \ No newline at end of file diff --git a/board/qemu/x86/readme.txt b/board/qemu/x86/readme.txt index 4f2e4c7da3..17500961d3 100644 --- a/board/qemu/x86/readme.txt +++ b/board/qemu/x86/readme.txt @@ -6,4 +6,4 @@ Optionally add -smp N to emulate a SMP system with N CPUs. The login prompt will appear in the graphical window. -Tested with QEMU 2.5.0 +Tested with QEMU 2.9.0 diff --git a/board/qemu/x86_64/linux-4.11.config b/board/qemu/x86_64/linux-4.11.config new file mode 100644 index 0000000000..e3bd1454e6 --- /dev/null +++ b/board/qemu/x86_64/linux-4.11.config @@ -0,0 +1,45 @@ +CONFIG_SYSVIPC=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_SMP=y +CONFIG_HYPERVISOR_GUEST=y +CONFIG_PARAVIRT=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_VIRTIO_BLK=y +CONFIG_BLK_DEV_SD=y +CONFIG_SCSI_VIRTIO=y +CONFIG_ATA=y +CONFIG_ATA_PIIX=y +CONFIG_NETDEVICES=y +CONFIG_VIRTIO_NET=y +CONFIG_NE2K_PCI=y +CONFIG_8139CP=y +CONFIG_INPUT_EVDEV=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_VIRTIO_CONSOLE=y +CONFIG_HW_RANDOM_VIRTIO=m +CONFIG_DRM=y +CONFIG_DRM_BOCHS=y +CONFIG_DRM_QXL=y +CONFIG_DRM_VIRTIO_GPU=y +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_HDA_INTEL=y +CONFIG_SND_HDA_GENERIC=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_UHCI_HCD=y +CONFIG_USB_STORAGE=y +CONFIG_VIRTIO_PCI=y +CONFIG_VIRTIO_BALLOON=y +CONFIG_VIRTIO_INPUT=y +CONFIG_VIRTIO_MMIO=y +CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y +CONFIG_EXT4_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/x86_64/linux-4.9.config b/board/qemu/x86_64/linux-4.9.config deleted file mode 100644 index e3bd1454e6..0000000000 --- a/board/qemu/x86_64/linux-4.9.config +++ /dev/null @@ -1,45 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_SMP=y -CONFIG_HYPERVISOR_GUEST=y -CONFIG_PARAVIRT=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_VIRTIO_BLK=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_VIRTIO=y -CONFIG_ATA=y -CONFIG_ATA_PIIX=y -CONFIG_NETDEVICES=y -CONFIG_VIRTIO_NET=y -CONFIG_NE2K_PCI=y -CONFIG_8139CP=y -CONFIG_INPUT_EVDEV=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_VIRTIO_CONSOLE=y -CONFIG_HW_RANDOM_VIRTIO=m -CONFIG_DRM=y -CONFIG_DRM_BOCHS=y -CONFIG_DRM_QXL=y -CONFIG_DRM_VIRTIO_GPU=y -CONFIG_SOUND=y -CONFIG_SND=y -CONFIG_SND_HDA_INTEL=y -CONFIG_SND_HDA_GENERIC=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_UHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_VIRTIO_PCI=y -CONFIG_VIRTIO_BALLOON=y -CONFIG_VIRTIO_INPUT=y -CONFIG_VIRTIO_MMIO=y -CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y -CONFIG_EXT4_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/x86_64/readme.txt b/board/qemu/x86_64/readme.txt index 6ea28d397f..ecd7813a1e 100644 --- a/board/qemu/x86_64/readme.txt +++ b/board/qemu/x86_64/readme.txt @@ -6,4 +6,4 @@ Optionally add -smp N to emulate a SMP system with N CPUs. The login prompt will appear in the graphical window. -Tested with QEMU 2.5.0 +Tested with QEMU 2.9.0 diff --git a/board/qemu/xtensa-lx60/linux-4.11-nommu.config b/board/qemu/xtensa-lx60/linux-4.11-nommu.config new file mode 100644 index 0000000000..10f7ee125c --- /dev/null +++ b/board/qemu/xtensa-lx60/linux-4.11-nommu.config @@ -0,0 +1,38 @@ +CONFIG_NO_HZ_IDLE=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_XTENSA_VARIANT_CUSTOM=y +CONFIG_XTENSA_VARIANT_CUSTOM_NAME="dc233c" +# CONFIG_XTENSA_VARIANT_MMU is not set +CONFIG_XTENSA_UNALIGNED_USER=y +CONFIG_PREEMPT=y +CONFIG_KERNEL_LOAD_ADDRESS=0x00003000 +# CONFIG_PCI is not set +CONFIG_XTENSA_PLATFORM_XTFPGA=y +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="earlycon=uart8250,mmio32,0xfd050020,115200n8 console=ttyS0,115200n8 memmap=0x04000000@0" +CONFIG_DEFAULT_MEM_START=0x00000000 +CONFIG_BINFMT_FLAT=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +# CONFIG_IPV6 is not set +CONFIG_NETFILTER=y +CONFIG_DNS_RESOLVER=y +# CONFIG_WIRELESS is not set +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_NETDEVICES=y +CONFIG_MARVELL_PHY=y +# CONFIG_WLAN is not set +CONFIG_SERIAL_8250=y +# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_HWMON is not set +# CONFIG_VGA_CONSOLE is not set +CONFIG_TMPFS=y +CONFIG_FANOTIFY=y +CONFIG_PRINTK_TIME=y +# CONFIG_S32C1I_SELFTEST is not set diff --git a/board/qemu/xtensa-lx60/linux-4.11.config b/board/qemu/xtensa-lx60/linux-4.11.config new file mode 100644 index 0000000000..625b86049f --- /dev/null +++ b/board/qemu/xtensa-lx60/linux-4.11.config @@ -0,0 +1,36 @@ +# CONFIG_SWAP is not set +# CONFIG_CROSS_MEMORY_ATTACH is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_XTENSA_VARIANT_DC233C=y +CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX=y +CONFIG_XTENSA_PLATFORM_XTFPGA=y +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=ttyS0,38400 memmap=0x04000000@0" +# CONFIG_COMPACTION is not set +# CONFIG_BOUNCE is not set +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_IPV6 is not set +# CONFIG_WIRELESS is not set +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_NETDEVICES=y +# CONFIG_WLAN is not set +CONFIG_SERIAL_8250=y +# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_HW_RANDOM is not set +# CONFIG_HWMON is not set +# CONFIG_VGA_CONSOLE is not set +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_LD_NO_RELAX=y +# CONFIG_S32C1I_SELFTEST is not set diff --git a/board/qemu/xtensa-lx60/linux-4.9-nommu.config b/board/qemu/xtensa-lx60/linux-4.9-nommu.config deleted file mode 100644 index 10f7ee125c..0000000000 --- a/board/qemu/xtensa-lx60/linux-4.9-nommu.config +++ /dev/null @@ -1,38 +0,0 @@ -CONFIG_NO_HZ_IDLE=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_XTENSA_VARIANT_CUSTOM=y -CONFIG_XTENSA_VARIANT_CUSTOM_NAME="dc233c" -# CONFIG_XTENSA_VARIANT_MMU is not set -CONFIG_XTENSA_UNALIGNED_USER=y -CONFIG_PREEMPT=y -CONFIG_KERNEL_LOAD_ADDRESS=0x00003000 -# CONFIG_PCI is not set -CONFIG_XTENSA_PLATFORM_XTFPGA=y -CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="earlycon=uart8250,mmio32,0xfd050020,115200n8 console=ttyS0,115200n8 memmap=0x04000000@0" -CONFIG_DEFAULT_MEM_START=0x00000000 -CONFIG_BINFMT_FLAT=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_IPV6 is not set -CONFIG_NETFILTER=y -CONFIG_DNS_RESOLVER=y -# CONFIG_WIRELESS is not set -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_NETDEVICES=y -CONFIG_MARVELL_PHY=y -# CONFIG_WLAN is not set -CONFIG_SERIAL_8250=y -# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set -CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -CONFIG_TMPFS=y -CONFIG_FANOTIFY=y -CONFIG_PRINTK_TIME=y -# CONFIG_S32C1I_SELFTEST is not set diff --git a/board/qemu/xtensa-lx60/linux-4.9.config b/board/qemu/xtensa-lx60/linux-4.9.config deleted file mode 100644 index 625b86049f..0000000000 --- a/board/qemu/xtensa-lx60/linux-4.9.config +++ /dev/null @@ -1,36 +0,0 @@ -# CONFIG_SWAP is not set -# CONFIG_CROSS_MEMORY_ATTACH is not set -CONFIG_BLK_DEV_INITRD=y -CONFIG_XTENSA_VARIANT_DC233C=y -CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX=y -CONFIG_XTENSA_PLATFORM_XTFPGA=y -CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="console=ttyS0,38400 memmap=0x04000000@0" -# CONFIG_COMPACTION is not set -# CONFIG_BOUNCE is not set -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -# CONFIG_WIRELESS is not set -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -CONFIG_NETDEVICES=y -# CONFIG_WLAN is not set -CONFIG_SERIAL_8250=y -# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set -CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_LD_NO_RELAX=y -# CONFIG_S32C1I_SELFTEST is not set diff --git a/board/qemu/xtensa-lx60/linux/linux-0001-disable-redboot-and-uboot.patch b/board/qemu/xtensa-lx60/linux/linux-0001-disable-redboot-and-uboot.patch deleted file mode 100644 index c0ccf48466..0000000000 --- a/board/qemu/xtensa-lx60/linux/linux-0001-disable-redboot-and-uboot.patch +++ /dev/null @@ -1,16 +0,0 @@ -disable boot-uboot and boot-redboot, requires a patched u-boot and mkimage - -Signed-off-by:Waldemar Brodkorb - -diff -Nur linux-3.15.orig/arch/xtensa/boot/Makefile linux-3.15/arch/xtensa/boot/Makefile ---- linux-3.15.orig/arch/xtensa/boot/Makefile 2014-06-08 20:19:54.000000000 +0200 -+++ linux-3.15/arch/xtensa/boot/Makefile 2014-06-14 20:07:15.206091165 +0200 -@@ -23,7 +23,7 @@ - - bootdir-$(CONFIG_XTENSA_PLATFORM_ISS) += boot-elf - bootdir-$(CONFIG_XTENSA_PLATFORM_XT2000) += boot-redboot boot-elf boot-uboot --bootdir-$(CONFIG_XTENSA_PLATFORM_XTFPGA) += boot-redboot boot-elf boot-uboot -+bootdir-$(CONFIG_XTENSA_PLATFORM_XTFPGA) += boot-elf - - zImage Image: $(bootdir-y) - diff --git a/board/qemu/xtensa-lx60/readme.txt b/board/qemu/xtensa-lx60/readme.txt index be77345e44..9a82c53752 100644 --- a/board/qemu/xtensa-lx60/readme.txt +++ b/board/qemu/xtensa-lx60/readme.txt @@ -4,5 +4,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. -Tested with QEMU 2.6.0 -Known to fail with 2.5.0 +Tested with QEMU 2.9.0 diff --git a/configs/qemu_aarch64_virt_defconfig b/configs/qemu_aarch64_virt_defconfig index 222c69eb7b..1ef4405ac4 100644 --- a/configs/qemu_aarch64_virt_defconfig +++ b/configs/qemu_aarch64_virt_defconfig @@ -9,12 +9,12 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0" # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ROOTFS_INITRAMFS=y -# Linux headers same as kernel, a 4.9 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y +# Linux headers same as kernel, a 4.11 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/aarch64-virt/linux-4.9.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/aarch64-virt/linux-4.11.config" diff --git a/configs/qemu_arm_versatile_defconfig b/configs/qemu_arm_versatile_defconfig index afeef75c9c..9845ec6464 100644 --- a/configs/qemu_arm_versatile_defconfig +++ b/configs/qemu_arm_versatile_defconfig @@ -10,14 +10,14 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Linux headers same as kernel, a 4.9 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y +# Linux headers same as kernel, a 4.11 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/arm-versatile/linux-4.9.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/arm-versatile/linux-4.11.config" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="versatile-pb" diff --git a/configs/qemu_arm_versatile_nommu_defconfig b/configs/qemu_arm_versatile_nommu_defconfig index 6cc646b266..9c48172e40 100644 --- a/configs/qemu_arm_versatile_nommu_defconfig +++ b/configs/qemu_arm_versatile_nommu_defconfig @@ -27,6 +27,6 @@ BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_4=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.4.45" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.4.70" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/arm-versatile/linux-4.4-nommu.config" diff --git a/configs/qemu_arm_vexpress_defconfig b/configs/qemu_arm_vexpress_defconfig index f8dd5a09c6..faba6a6c25 100644 --- a/configs/qemu_arm_vexpress_defconfig +++ b/configs/qemu_arm_vexpress_defconfig @@ -13,13 +13,13 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Linux headers same as kernel, a 4.9 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y +# Linux headers same as kernel, a 4.11 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3" BR2_LINUX_KERNEL_DEFCONFIG="vexpress" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="vexpress-v2p-ca9" diff --git a/configs/qemu_m68k_mcf5208_defconfig b/configs/qemu_m68k_mcf5208_defconfig index a5ebf1539b..ccbdcfa3b7 100644 --- a/configs/qemu_m68k_mcf5208_defconfig +++ b/configs/qemu_m68k_mcf5208_defconfig @@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0" BR2_TARGET_ROOTFS_INITRAMFS=y # BR2_TARGET_ROOTFS_TAR is not set -# Linux headers same as kernel, a 4.8 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y +# Linux headers same as kernel, a 4.11 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.17" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/m68k-mcf5208/linux-4.8.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/m68k-mcf5208/linux-4.11.config" BR2_LINUX_KERNEL_VMLINUX=y # Serial port config diff --git a/configs/qemu_m68k_q800_defconfig b/configs/qemu_m68k_q800_defconfig index 7bba7ef11b..6dc50a7c05 100644 --- a/configs/qemu_m68k_q800_defconfig +++ b/configs/qemu_m68k_q800_defconfig @@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Linux headers same as kernel, a 4.9 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y +# Linux headers same as kernel, a 4.11 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/m68k-q800/linux-4.9.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/m68k-q800/linux-4.11.config" BR2_LINUX_KERNEL_VMLINUX=y # Serial port config diff --git a/configs/qemu_microblazebe_mmu_defconfig b/configs/qemu_microblazebe_mmu_defconfig index 3af8ad9015..ae736ff101 100644 --- a/configs/qemu_microblazebe_mmu_defconfig +++ b/configs/qemu_microblazebe_mmu_defconfig @@ -10,14 +10,14 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyUL0" # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ROOTFS_INITRAMFS=y -# Linux headers same as kernel, a 4.9 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y +# Linux headers same as kernel, a 4.11 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazebe-mmu/linux-4.9.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazebe-mmu/linux-4.11.config" BR2_LINUX_KERNEL_LINUX_BIN=y BR2_LINUX_KERNEL_PATCH="board/qemu/microblazebe-mmu/xilinx-xemaclite.patch" diff --git a/configs/qemu_microblazeel_mmu_defconfig b/configs/qemu_microblazeel_mmu_defconfig index 6bda8cc70f..3dedecf710 100644 --- a/configs/qemu_microblazeel_mmu_defconfig +++ b/configs/qemu_microblazeel_mmu_defconfig @@ -10,14 +10,14 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyUL0" # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ROOTFS_INITRAMFS=y -# Linux headers same as kernel, a 4.9 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y +# Linux headers same as kernel, a 4.11 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazeel-mmu/linux-4.9.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazeel-mmu/linux-4.11.config" BR2_LINUX_KERNEL_LINUX_BIN=y BR2_LINUX_KERNEL_PATCH="board/qemu/microblazeel-mmu/xilinx-xemaclite.patch" diff --git a/configs/qemu_mips32r2_malta_defconfig b/configs/qemu_mips32r2_malta_defconfig index efac1f2689..db408b0e72 100644 --- a/configs/qemu_mips32r2_malta_defconfig +++ b/configs/qemu_mips32r2_malta_defconfig @@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Linux headers same as kernel, a 4.9 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y +# Linux headers same as kernel, a 4.11 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r2-malta/linux-4.9.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r2-malta/linux-4.11.config" BR2_LINUX_KERNEL_VMLINUX=y # Serial port config diff --git a/configs/qemu_mips32r2el_malta_defconfig b/configs/qemu_mips32r2el_malta_defconfig index 066c89779f..ccec419add 100644 --- a/configs/qemu_mips32r2el_malta_defconfig +++ b/configs/qemu_mips32r2el_malta_defconfig @@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Linux headers same as kernel, a 4.9 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y +# Linux headers same as kernel, a 4.11 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r2el-malta/linux-4.9.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r2el-malta/linux-4.11.config" BR2_LINUX_KERNEL_VMLINUX=y # Serial port config diff --git a/configs/qemu_mips32r6_malta_defconfig b/configs/qemu_mips32r6_malta_defconfig index 898477b38c..3aee84c53a 100644 --- a/configs/qemu_mips32r6_malta_defconfig +++ b/configs/qemu_mips32r6_malta_defconfig @@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Linux headers same as kernel, a 4.9 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y +# Linux headers same as kernel, a 4.11 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r6-malta/linux-4.9.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r6-malta/linux-4.11.config" BR2_LINUX_KERNEL_VMLINUX=y # Compiler diff --git a/configs/qemu_mips32r6el_malta_defconfig b/configs/qemu_mips32r6el_malta_defconfig index a082167c22..aa43dce945 100644 --- a/configs/qemu_mips32r6el_malta_defconfig +++ b/configs/qemu_mips32r6el_malta_defconfig @@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Linux headers same as kernel, a 4.9 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y +# Linux headers same as kernel, a 4.11 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r6el-malta/linux-4.9.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r6el-malta/linux-4.11.config" BR2_LINUX_KERNEL_VMLINUX=y # Compiler diff --git a/configs/qemu_mips64_malta_defconfig b/configs/qemu_mips64_malta_defconfig index 7c4006331c..52e42992a6 100644 --- a/configs/qemu_mips64_malta_defconfig +++ b/configs/qemu_mips64_malta_defconfig @@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Linux headers same as kernel, a 4.8 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y +# Linux headers same as kernel, a 4.11 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.17" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64-malta/linux-4.8.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64-malta/linux-4.11.config" BR2_LINUX_KERNEL_VMLINUX=y # Serial port config diff --git a/configs/qemu_mips64el_malta_defconfig b/configs/qemu_mips64el_malta_defconfig index e95704569b..2b35c1a016 100644 --- a/configs/qemu_mips64el_malta_defconfig +++ b/configs/qemu_mips64el_malta_defconfig @@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Linux headers same as kernel, a 4.9 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y +# Linux headers same as kernel, a 4.11 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64el-malta/linux-4.9.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64el-malta/linux-4.11.config" BR2_LINUX_KERNEL_VMLINUX=y # Serial port config diff --git a/configs/qemu_mips64r6_malta_defconfig b/configs/qemu_mips64r6_malta_defconfig index dccdc169fa..06c0133f9f 100644 --- a/configs/qemu_mips64r6_malta_defconfig +++ b/configs/qemu_mips64r6_malta_defconfig @@ -10,15 +10,15 @@ BR2_SYSTEM_DHCP="eth0" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Linux headers same as kernel, a 4.9 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y +# Linux headers same as kernel, a 4.11 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64r6-malta/linux-4.9.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64r6-malta/linux-4.11.config" BR2_LINUX_KERNEL_VMLINUX=y # Compiler diff --git a/configs/qemu_mips64r6el_malta_defconfig b/configs/qemu_mips64r6el_malta_defconfig index 8bbc114ae6..e80e728486 100644 --- a/configs/qemu_mips64r6el_malta_defconfig +++ b/configs/qemu_mips64r6el_malta_defconfig @@ -10,15 +10,15 @@ BR2_SYSTEM_DHCP="eth0" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Linux headers same as kernel, a 4.9 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y +# Linux headers same as kernel, a 4.11 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64r6el-malta/linux-4.9.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64r6el-malta/linux-4.11.config" BR2_LINUX_KERNEL_VMLINUX=y # Compiler diff --git a/configs/qemu_nios2_10m50_defconfig b/configs/qemu_nios2_10m50_defconfig index 345a6e5488..a9eaf0800a 100644 --- a/configs/qemu_nios2_10m50_defconfig +++ b/configs/qemu_nios2_10m50_defconfig @@ -1,10 +1,10 @@ BR2_nios2=y BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3" BR2_LINUX_KERNEL_DEFCONFIG="10m50" -BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/qemu/nios2-10m50/linux-4.9.fragment" +BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/qemu/nios2-10m50/linux-4.11.fragment" BR2_TARGET_ROOTFS_INITRAMFS=y -# Linux headers same as kernel, a 4.9 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y +# Linux headers same as kernel, a 4.11 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y diff --git a/configs/qemu_or1k_defconfig b/configs/qemu_or1k_defconfig index 4f70285d41..0eb1916a41 100644 --- a/configs/qemu_or1k_defconfig +++ b/configs/qemu_or1k_defconfig @@ -1,19 +1,16 @@ # Architecture BR2_or1k=y -# Patches -BR2_GLOBAL_PATCH_DIR="board/qemu/or1k/patches" - # Filesystem # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ROOTFS_INITRAMFS=y -# Linux headers same as kernel, a 4,9 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y +# Linux headers same as kernel, a 4,11 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/or1k/linux-4.9.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/or1k/linux-4.11.config" diff --git a/configs/qemu_ppc64_pseries_defconfig b/configs/qemu_ppc64_pseries_defconfig index c15de3bc48..7af20e989d 100644 --- a/configs/qemu_ppc64_pseries_defconfig +++ b/configs/qemu_ppc64_pseries_defconfig @@ -10,12 +10,12 @@ BR2_TARGET_GENERIC_GETTY_PORT="hvc0" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Linux headers same as kernel, a 4.9 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y +# Linux headers same as kernel, a 4.11 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3" BR2_LINUX_KERNEL_DEFCONFIG="pseries" BR2_LINUX_KERNEL_VMLINUX=y diff --git a/configs/qemu_ppc_g3beige_defconfig b/configs/qemu_ppc_g3beige_defconfig index 58d4dfc817..9482aaa874 100644 --- a/configs/qemu_ppc_g3beige_defconfig +++ b/configs/qemu_ppc_g3beige_defconfig @@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Linux headers same as kernel, a 4.9 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y +# Linux headers same as kernel, a 4.11 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-g3beige/linux-4.9.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-g3beige/linux-4.11.config" BR2_LINUX_KERNEL_VMLINUX=y # Serial port config diff --git a/configs/qemu_ppc_mpc8544ds_defconfig b/configs/qemu_ppc_mpc8544ds_defconfig index 0252da728d..d2d92b6652 100644 --- a/configs/qemu_ppc_mpc8544ds_defconfig +++ b/configs/qemu_ppc_mpc8544ds_defconfig @@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0" # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ROOTFS_INITRAMFS=y -# Linux headers same as kernel, a 4.9 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y +# Linux headers same as kernel, a 4.11 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-mpc8544ds/linux-4.9.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-mpc8544ds/linux-4.11.config" BR2_LINUX_KERNEL_VMLINUX=y # Serial port config diff --git a/configs/qemu_sparc64_sun4u_defconfig b/configs/qemu_sparc64_sun4u_defconfig index ef2d22f796..1f4df0614a 100644 --- a/configs/qemu_sparc64_sun4u_defconfig +++ b/configs/qemu_sparc64_sun4u_defconfig @@ -9,12 +9,12 @@ BR2_SYSTEM_DHCP="eth0" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Linux headers same as kernel, a 4.9 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y +# Linux headers same as kernel, a 4.11 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y # Linux kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc64-sun4u/linux-4.9.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc64-sun4u/linux-4.11.config" diff --git a/configs/qemu_sparc_ss10_defconfig b/configs/qemu_sparc_ss10_defconfig index 1d6c951737..b492f8882e 100644 --- a/configs/qemu_sparc_ss10_defconfig +++ b/configs/qemu_sparc_ss10_defconfig @@ -9,12 +9,12 @@ BR2_SYSTEM_DHCP="eth0" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Linux headers same as kernel, a 4.9 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y +# Linux headers same as kernel, a 4.11 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y # Linux kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc-ss10/linux-4.9.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc-ss10/linux-4.11.config" diff --git a/configs/qemu_x86_64_defconfig b/configs/qemu_x86_64_defconfig index 7002d5edfe..aa17ace5b0 100644 --- a/configs/qemu_x86_64_defconfig +++ b/configs/qemu_x86_64_defconfig @@ -9,12 +9,12 @@ BR2_TARGET_GENERIC_GETTY_PORT="tty1" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Linux headers same as kernel, a 4.9 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y +# Linux headers same as kernel, a 4.11 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.9.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.11.config" diff --git a/configs/qemu_x86_defconfig b/configs/qemu_x86_defconfig index 99ca604006..c023a8ee19 100644 --- a/configs/qemu_x86_defconfig +++ b/configs/qemu_x86_defconfig @@ -10,12 +10,12 @@ BR2_TARGET_GENERIC_GETTY_PORT="tty1" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Linux headers same as kernel, a 4.9 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y +# Linux headers same as kernel, a 4.11 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86/linux-4.9.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86/linux-4.11.config" diff --git a/configs/qemu_xtensa_lx60_defconfig b/configs/qemu_xtensa_lx60_defconfig index 915b6ff148..3e98222b65 100644 --- a/configs/qemu_xtensa_lx60_defconfig +++ b/configs/qemu_xtensa_lx60_defconfig @@ -5,9 +5,6 @@ BR2_XTENSA_CUSTOM_NAME="dc233c" BR2_XTENSA_CORE_NAME="lx60" BR2_XTENSA_OVERLAY_DIR="board/qemu/xtensa-lx60" -# Patches -BR2_GLOBAL_PATCH_DIR="board/qemu/xtensa-lx60" - # System BR2_SYSTEM_DHCP="eth0" BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" @@ -16,15 +13,15 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ROOTFS_INITRAMFS=y -# Linux headers same as kernel, a 4.9 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y +# Linux headers same as kernel, a 4.11 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.16" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/xtensa-lx60/linux-4.9.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/xtensa-lx60/linux-4.11.config" BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y BR2_LINUX_KERNEL_IMAGE_NAME="Image.elf" -BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="zImage" +BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="Image" diff --git a/configs/qemu_xtensa_lx60_nommu_defconfig b/configs/qemu_xtensa_lx60_nommu_defconfig index 8c66c3ac0c..998cd2aa6b 100644 --- a/configs/qemu_xtensa_lx60_nommu_defconfig +++ b/configs/qemu_xtensa_lx60_nommu_defconfig @@ -9,9 +9,6 @@ BR2_XTENSA_OVERLAY_DIR="board/qemu/xtensa-lx60" BR2_PACKAGE_HOST_ELF2FLT=y # BR2_USE_MMU is not set -# Patches -BR2_GLOBAL_PATCH_DIR="board/qemu/xtensa-lx60" - # System BR2_SYSTEM_DHCP="eth0" BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" @@ -20,15 +17,15 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ROOTFS_INITRAMFS=y -# Linux headers same as kernel, a 4.9 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y +# Linux headers same as kernel, a 4.11 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.16" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/xtensa-lx60/linux-4.9-nommu.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/xtensa-lx60/linux-4.11-nommu.config" BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y BR2_LINUX_KERNEL_IMAGE_NAME="Image.elf" -BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="zImage" +BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="Image"