From: Roland Scheidegger Date: Sat, 2 Jan 2016 03:59:09 +0000 (+0100) Subject: llvmpipe: do 64bit plane calculations in the sse path X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=2923c7a0ed92a29da029183356e81ad55e615cf7;p=mesa.git llvmpipe: do 64bit plane calculations in the sse path The sse path was pretty much disabled for practical purposes because the largest allowed fb size was 128x128. So, adapt it for 64bit plane calculations. This is actually not that difficult, though a problem is that we can't do a signed 32x32->64bit mul, only unsigned, so need to fix that up. Overall, the code still looks reasonable, though it's not like changes there in setup really make much of a difference in the end... Reviewed-by: Jose Fonseca Reviewed-by: Brian Paul --- diff --git a/src/gallium/auxiliary/util/u_sse.h b/src/gallium/auxiliary/util/u_sse.h index 7f8e5a1a3cf..cae4138ba01 100644 --- a/src/gallium/auxiliary/util/u_sse.h +++ b/src/gallium/auxiliary/util/u_sse.h @@ -166,14 +166,49 @@ _mm_shuffle_epi8(__m128i a, __m128i mask) #endif /* !PIPE_ARCH_SSSE3 */ +/* + * Provide an SSE implementation of _mm_mul_epi32() in terms of + * _mm_mul_epu32(). + * + * Basically, albeit surprising at first (and second, and third...) look + * if a * b is done signed instead of unsigned, can just + * subtract b from the high bits of the result if a is negative + * (and the same for a if b is negative). Modular arithmetic at its best! + * + * So for int32 a,b in crude pseudo-code ("*" here denoting a widening mul) + * fixupb = (signmask(b) & a) << 32ULL + * fixupa = (signmask(a) & b) << 32ULL + * a * b = (unsigned)a * (unsigned)b - fixupb - fixupa + * = (unsigned)a * (unsigned)b -(fixupb + fixupa) + * + * This does both lo (dwords 0/2) and hi parts (1/3) at the same time due + * to some optimization potential. + */ +static inline __m128i +mm_mullohi_epi32(const __m128i a, const __m128i b, __m128i *res13) +{ + __m128i a13, b13, mul02, mul13; + __m128i anegmask, bnegmask, fixup, fixup02, fixup13; + a13 = _mm_shuffle_epi32(a, _MM_SHUFFLE(2,3,0,1)); + b13 = _mm_shuffle_epi32(b, _MM_SHUFFLE(2,3,0,1)); + anegmask = _mm_srai_epi32(a, 31); + bnegmask = _mm_srai_epi32(b, 31); + fixup = _mm_add_epi32(_mm_and_si128(anegmask, b), + _mm_and_si128(bnegmask, a)); + mul02 = _mm_mul_epu32(a, b); + mul13 = _mm_mul_epu32(a13, b13); + fixup02 = _mm_slli_epi64(fixup, 32); + fixup13 = _mm_and_si128(fixup, _mm_set_epi32(-1,0,-1,0)); + *res13 = _mm_sub_epi64(mul13, fixup13); + return _mm_sub_epi64(mul02, fixup02); +} /* Provide an SSE2 implementation of _mm_mullo_epi32() in terms of * _mm_mul_epu32(). * - * I suspect this works fine for us because one of our operands is - * always positive, but not sure that this can be used for general - * signed integer multiplication. + * This always works regardless the signs of the operands, since + * the high bits (which would be different) aren't used. * * This seems close enough to the speed of SSE4 and the real * _mm_mullo_epi32() intrinsic as to not justify adding an sse4 @@ -188,6 +223,12 @@ static inline __m128i mm_mullo_epi32(const __m128i a, const __m128i b) /* Interleave the results, either with shuffles or (slightly * faster) direct bit operations: + * XXX: might be only true for some cpus (in particular 65nm + * Core 2). On most cpus (including that Core 2, but not Nehalem...) + * using _mm_shuffle_ps/_mm_shuffle_epi32 might also be faster + * than using the 3 instructions below. But logic should be fine + * as well, we can't have optimal solution for all cpus (if anything, + * should just use _mm_mullo_epi32() if sse41 is available...). */ #if 0 __m128i ba8 = _mm_shuffle_epi32(ba, 8); @@ -214,17 +255,44 @@ transpose4_epi32(const __m128i * restrict a, __m128i * restrict q, __m128i * restrict r) { - __m128i t0 = _mm_unpacklo_epi32(*a, *b); - __m128i t1 = _mm_unpacklo_epi32(*c, *d); - __m128i t2 = _mm_unpackhi_epi32(*a, *b); - __m128i t3 = _mm_unpackhi_epi32(*c, *d); - - *o = _mm_unpacklo_epi64(t0, t1); - *p = _mm_unpackhi_epi64(t0, t1); - *q = _mm_unpacklo_epi64(t2, t3); - *r = _mm_unpackhi_epi64(t2, t3); + __m128i t0 = _mm_unpacklo_epi32(*a, *b); + __m128i t1 = _mm_unpacklo_epi32(*c, *d); + __m128i t2 = _mm_unpackhi_epi32(*a, *b); + __m128i t3 = _mm_unpackhi_epi32(*c, *d); + + *o = _mm_unpacklo_epi64(t0, t1); + *p = _mm_unpackhi_epi64(t0, t1); + *q = _mm_unpacklo_epi64(t2, t3); + *r = _mm_unpackhi_epi64(t2, t3); } + +/* + * Same as above, except the first two values are already interleaved + * (i.e. contain 64bit values). + */ +static inline void +transpose2_64_2_32(const __m128i * restrict a01, + const __m128i * restrict a23, + const __m128i * restrict c, + const __m128i * restrict d, + __m128i * restrict o, + __m128i * restrict p, + __m128i * restrict q, + __m128i * restrict r) +{ + __m128i t0 = *a01; + __m128i t1 = _mm_unpacklo_epi32(*c, *d); + __m128i t2 = *a23; + __m128i t3 = _mm_unpackhi_epi32(*c, *d); + + *o = _mm_unpacklo_epi64(t0, t1); + *p = _mm_unpackhi_epi64(t0, t1); + *q = _mm_unpacklo_epi64(t2, t3); + *r = _mm_unpackhi_epi64(t2, t3); +} + + #define SCALAR_EPI32(m, i) _mm_shuffle_epi32((m), _MM_SHUFFLE(i,i,i,i)) diff --git a/src/gallium/drivers/llvmpipe/lp_setup_line.c b/src/gallium/drivers/llvmpipe/lp_setup_line.c index fac1cd61d77..a0de599c9c6 100644 --- a/src/gallium/drivers/llvmpipe/lp_setup_line.c +++ b/src/gallium/drivers/llvmpipe/lp_setup_line.c @@ -644,19 +644,25 @@ try_setup_line( struct lp_setup_context *setup, line->inputs.layer = layer; line->inputs.viewport_index = viewport_index; + /* + * XXX: this code is mostly identical to the one in lp_setup_tri, except it + * uses 4 planes instead of 3. Could share the code (including the sse + * assembly, in fact we'd get the 4th plane for free). + * The only difference apart from storing the 4th plane would be some + * different shuffle for calculating dcdx/dcdy. + */ for (i = 0; i < 4; i++) { - /* half-edge constants, will be interated over the whole render + /* half-edge constants, will be iterated over the whole render * target. */ plane[i].c = IMUL64(plane[i].dcdx, x[i]) - IMUL64(plane[i].dcdy, y[i]); - - /* correct for top-left vs. bottom-left fill convention. - */ + /* correct for top-left vs. bottom-left fill convention. + */ if (plane[i].dcdx < 0) { /* both fill conventions want this - adjust for left edges */ - plane[i].c++; + plane[i].c++; } else if (plane[i].dcdx == 0) { if (setup->pixel_offset == 0) { diff --git a/src/gallium/drivers/llvmpipe/lp_setup_tri.c b/src/gallium/drivers/llvmpipe/lp_setup_tri.c index a1631fdaee9..358da442ea7 100644 --- a/src/gallium/drivers/llvmpipe/lp_setup_tri.c +++ b/src/gallium/drivers/llvmpipe/lp_setup_tri.c @@ -390,26 +390,18 @@ do_triangle_ccw(struct lp_setup_context *setup, plane = GET_PLANES(tri); #if defined(PIPE_ARCH_SSE) - /* - * XXX this code is effectively disabled for all practical purposes, - * as the allowed fb size is tiny if FIXED_ORDER is 8. - */ - if (setup->fb.width <= MAX_FIXED_LENGTH32 && - setup->fb.height <= MAX_FIXED_LENGTH32 && - (bbox.x1 - bbox.x0) <= MAX_FIXED_LENGTH32 && - (bbox.y1 - bbox.y0) <= MAX_FIXED_LENGTH32) { + if (1) { __m128i vertx, verty; __m128i shufx, shufy; - __m128i dcdx, dcdy, c; - __m128i unused; + __m128i dcdx, dcdy; + __m128i cdx02, cdx13, cdy02, cdy13, c02, c13; + __m128i c01, c23, unused; __m128i dcdx_neg_mask; __m128i dcdy_neg_mask; __m128i dcdx_zero_mask; - __m128i top_left_flag; - __m128i c_inc_mask, c_inc; + __m128i top_left_flag, c_dec; __m128i eo, p0, p1, p2; __m128i zero = _mm_setzero_si128(); - PIPE_ALIGN_VAR(16) int32_t temp_vec[4]; vertx = _mm_load_si128((__m128i *)position->x); /* vertex x coords */ verty = _mm_load_si128((__m128i *)position->y); /* vertex y coords */ @@ -426,48 +418,70 @@ do_triangle_ccw(struct lp_setup_context *setup, top_left_flag = _mm_set1_epi32((setup->bottom_edge_rule == 0) ? ~0 : 0); - c_inc_mask = _mm_or_si128(dcdx_neg_mask, - _mm_and_si128(dcdx_zero_mask, - _mm_xor_si128(dcdy_neg_mask, - top_left_flag))); - - c_inc = _mm_srli_epi32(c_inc_mask, 31); - - c = _mm_sub_epi32(mm_mullo_epi32(dcdx, vertx), - mm_mullo_epi32(dcdy, verty)); + c_dec = _mm_or_si128(dcdx_neg_mask, + _mm_and_si128(dcdx_zero_mask, + _mm_xor_si128(dcdy_neg_mask, + top_left_flag))); - c = _mm_add_epi32(c, c_inc); + /* + * 64 bit arithmetic. + * Note we need _signed_ mul (_mm_mul_epi32) which we emulate. + */ + cdx02 = mm_mullohi_epi32(dcdx, vertx, &cdx13); + cdy02 = mm_mullohi_epi32(dcdy, verty, &cdy13); + c02 = _mm_sub_epi64(cdx02, cdy02); + c13 = _mm_sub_epi64(cdx13, cdy13); + c02 = _mm_sub_epi64(c02, _mm_shuffle_epi32(c_dec, + _MM_SHUFFLE(2,2,0,0))); + c13 = _mm_sub_epi64(c13, _mm_shuffle_epi32(c_dec, + _MM_SHUFFLE(3,3,1,1))); + + /* + * Useful for very small fbs/tris (or fewer subpixel bits) only: + * c = _mm_sub_epi32(mm_mullo_epi32(dcdx, vertx), + * mm_mullo_epi32(dcdy, verty)); + * + * c = _mm_sub_epi32(c, c_dec); + */ /* Scale up to match c: */ dcdx = _mm_slli_epi32(dcdx, FIXED_ORDER); dcdy = _mm_slli_epi32(dcdy, FIXED_ORDER); - /* Calculate trivial reject values: + /* + * Calculate trivial reject values: + * Note eo cannot overflow even if dcdx/dcdy would already have + * 31 bits (which they shouldn't have). This is because eo + * is never negative (albeit if we rely on that need to be careful...) */ eo = _mm_sub_epi32(_mm_andnot_si128(dcdy_neg_mask, dcdy), _mm_and_si128(dcdx_neg_mask, dcdx)); /* ei = _mm_sub_epi32(_mm_sub_epi32(dcdy, dcdx), eo); */ - /* Pointless transpose which gets undone immediately in - * rasterization: + /* + * Pointless transpose which gets undone immediately in + * rasterization. + * It is actually difficult to do away with it - would essentially + * need GET_PLANES_DX, GET_PLANES_DY etc., but the calculations + * for this then would need to depend on the number of planes. + * The transpose is quite special here due to c being 64bit... + * The store has to be unaligned (unless we'd make the plane size + * a multiple of 128), and of course storing eo separately... */ - transpose4_epi32(&c, &dcdx, &dcdy, &eo, - &p0, &p1, &p2, &unused); - -#define STORE_PLANE(plane, vec) do { \ - _mm_store_si128((__m128i *)&temp_vec, vec); \ - plane.c = (int64_t)temp_vec[0]; \ - plane.dcdx = temp_vec[1]; \ - plane.dcdy = temp_vec[2]; \ - plane.eo = temp_vec[3]; \ - } while(0) - - STORE_PLANE(plane[0], p0); - STORE_PLANE(plane[1], p1); - STORE_PLANE(plane[2], p2); -#undef STORE_PLANE + c01 = _mm_unpacklo_epi64(c02, c13); + c23 = _mm_unpackhi_epi64(c02, c13); + transpose2_64_2_32(&c01, &c23, &dcdx, &dcdy, + &p0, &p1, &p2, &unused); + _mm_storeu_si128((__m128i *)&plane[0], p0); + plane[0].eo = (uint32_t)_mm_cvtsi128_si32(eo); + _mm_storeu_si128((__m128i *)&plane[1], p1); + eo = _mm_shuffle_epi32(eo, _MM_SHUFFLE(3,2,0,1)); + plane[1].eo = (uint32_t)_mm_cvtsi128_si32(eo); + _mm_storeu_si128((__m128i *)&plane[2], p2); + eo = _mm_shuffle_epi32(eo, _MM_SHUFFLE(0,0,0,2)); + plane[2].eo = (uint32_t)_mm_cvtsi128_si32(eo); } else #elif defined(_ARCH_PWR8) && defined(PIPE_ARCH_LITTLE_ENDIAN) /* @@ -577,17 +591,17 @@ do_triangle_ccw(struct lp_setup_context *setup, plane[2].dcdx = position->dy20; for (i = 0; i < 3; i++) { - /* half-edge constants, will be interated over the whole render + /* half-edge constants, will be iterated over the whole render * target. */ plane[i].c = IMUL64(plane[i].dcdx, position->x[i]) - - IMUL64(plane[i].dcdy, position->y[i]); + IMUL64(plane[i].dcdy, position->y[i]); /* correct for top-left vs. bottom-left fill convention. - */ + */ if (plane[i].dcdx < 0) { /* both fill conventions want this - adjust for left edges */ - plane[i].c++; + plane[i].c++; } else if (plane[i].dcdx == 0) { if (setup->bottom_edge_rule == 0){