From: Ulf Samuelsson Date: Sat, 13 Oct 2007 23:13:17 +0000 (-0000) Subject: Bump fakeroot version and add patch X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=2ba41250f7a74bb290c381096a4d637ae2d06d71;p=buildroot.git Bump fakeroot version and add patch --- diff --git a/package/fakeroot/fakeroot-revert-ltmain.patch b/package/fakeroot/fakeroot-revert-ltmain.patch new file mode 100644 index 0000000000..96ce680474 --- /dev/null +++ b/package/fakeroot/fakeroot-revert-ltmain.patch @@ -0,0 +1,8937 @@ +--- fakeroot-1.8.1/ltmain.sh 2007-10-08 02:27:58.000000000 +0200 ++++ fakeroot-1.8.1.works/ltmain.sh 2007-10-10 09:46:24.000000000 +0200 +@@ -1,32 +1,30 @@ + # Generated from ltmain.m4sh; do not edit by hand + +-# ltmain.sh (GNU libtool 1.2460 2007/05/10 17:30:29) 2.1a ++# ltmain.sh (GNU libtool 1.2237 2005/12/21 11:40:47) 2.1a + # Written by Gordon Matzigkeit , 1996 + +-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc. ++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005 Free Software Foundation, Inc. + # This is free software; see the source for copying conditions. There is NO + # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + +-# GNU Libtool is free software; you can redistribute it and/or modify ++# This program is free software; you can redistribute it and/or modify + # it under the terms of the GNU General Public License as published by + # the Free Software Foundation; either version 2 of the License, or + # (at your option) any later version. + # +-# As a special exception to the GNU General Public License, +-# if you distribute this file as part of a program or library that +-# is built using GNU Libtool, you may include this file under the +-# same distribution terms that you use for the rest of that program. +-# +-# GNU Libtool is distributed in the hope that it will be useful, but ++# This program is distributed in the hope that it will be useful, but + # WITHOUT ANY WARRANTY; without even the implied warranty of + # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + # General Public License for more details. + # + # You should have received a copy of the GNU General Public License +-# along with GNU Libtool; see the file COPYING. If not, a copy +-# can be downloaded from http://www.gnu.org/licenses/gpl.html, +-# or obtained by writing to the Free Software Foundation, Inc., +-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. ++# ++# As a special exception to the GNU General Public License, if you ++# distribute this file as part of a program that contains a ++# configuration script generated by Autoconf, you may include it under ++# the same distribution terms that you use for the rest of that program. + + # Usage: $progname [OPTION]... [MODE-ARG]... + # +@@ -60,12 +58,12 @@ + # When reporting a bug, please describe a test case to reproduce it and + # include the following information: + # +-# host-triplet: $host ++# host-triplet: i486-pc-linux-gnu + # shell: $SHELL + # compiler: $LTCC + # compiler flags: $LTCFLAGS + # linker: $LD (gnu? $with_gnu_ld) +-# $progname: (GNU libtool 1.2460 2007/05/10 17:30:29) 2.1a Debian-1 ++# $progname: (GNU libtool 1.2237 2005/12/21 11:40:47) 2.1a + # automake: $automake_version + # autoconf: $autoconf_version + # +@@ -73,10 +71,14 @@ + + PROGRAM=ltmain.sh + PACKAGE=libtool +-VERSION="2.1a Debian-1" +-TIMESTAMP=" 1.2460 2007/05/10 17:30:29" ++VERSION="2.1a" ++TIMESTAMP=" 1.2460 2005/12/21 11:40:47" + package_revision=1.2460 + ++## --------------------- ## ++## M4sh Initialization. ## ++## --------------------- ## ++ + # Be Bourne compatible + if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh +@@ -84,37 +86,74 @@ if test -n "${ZSH_VERSION+set}" && (emul + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' +- setopt NO_GLOB_SUBST +-else +- case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac ++elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then ++ set -o posix + fi +-BIN_SH=xpg4; export BIN_SH # for Tru64 + DUALCASE=1; export DUALCASE # for MKS sh + +-# NLS nuisances: We save the old values to restore during execute mode. +-# Only set LANG and LC_ALL to C if already set. +-# These must not be set unconditionally because not all systems understand +-# e.g. LANG=C (notably SCO). +-for lt_var in LANG LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES ++# Support unset when possible. ++if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then ++ as_unset=unset ++else ++ as_unset=false ++fi ++ ++ ++# Work around bugs in pre-3.0 UWIN ksh. ++$as_unset ENV MAIL MAILPATH ++PS1='$ ' ++PS2='> ' ++PS4='+ ' ++ ++# NLS nuisances. ++for as_var in \ ++ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ ++ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ ++ LC_TELEPHONE LC_TIME + do +- eval "if test \"\${$lt_var+set}\" = set; then +- save_$lt_var=\$$lt_var +- $lt_var=C +- export $lt_var +- fi" ++ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then ++ eval $as_var=C; export $as_var ++ else ++ $as_unset $as_var ++ fi + done + +-$lt_unset CDPATH ++# Required to use basename. ++if expr a : '\(a\)' >/dev/null 2>&1; then ++ as_expr=expr ++else ++ as_expr=false ++fi ++ ++if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then ++ as_basename=basename ++else ++ as_basename=false ++fi ++ + ++# Name of the executable. ++as_me=`$as_basename "$0" || ++$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ ++ X"$0" : 'X\(//\)$' \| \ ++ X"$0" : 'X\(/\)$' \| \ ++ . : '\(.\)' 2>/dev/null || ++echo X/"$0" | ++ sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } ++ /^X\/\(\/\/\)$/{ s//\1/; q; } ++ /^X\/\(\/\).*/{ s//\1/; q; } ++ s/.*/./; q'` + + ++$as_unset CDPATH ++ + + + : ${CP="cp -f"} + : ${ECHO="echo"} +-: ${EGREP="/bin/grep -E"} +-: ${FGREP="/bin/grep -F"} +-: ${GREP="/bin/grep"} ++: ${EGREP="grep -E"} ++: ${FGREP="grep -F"} ++: ${GREP="grep"} + : ${LN_S="ln -s"} + : ${MAKE="make"} + : ${MKDIR="mkdir"} +@@ -185,17 +224,23 @@ double_quote_subst='s/\(["`\\]\)/\\\1/g' + # `\'-ed in input to the same. If an odd number of `\' preceded a '$' + # in input to double_quote_subst, that '$' was protected from expansion. + # Since each input `\' is now two `\'s, look for any number of runs of +-# four `\'s followed by two `\'s and then a '$'. `\' that '$'. +-bs='\\' +-bs2='\\\\' +-bs4='\\\\\\\\' +-dollar='\$' +-sed_double_backslash="\ +- s/$bs4/&\\ +-/g +- s/^$bs2$dollar/$bs&/ +- s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g +- s/\n//g" ++# four `\'s followed by two `\'s and then a '$'. `\' that '$'. Note ++# that the embedded single quotes serve only to enhance readability. ++sed_double_backslash='s/^\(\(''\\\\''\\\\''\)*''\\\\''\)\$/\1\\$/; ++ s/\([^\\]\(''\\\\''\\\\''\)*''\\\\''\)\$/\1\\$/g' ++ ++# test EBCDIC or ASCII ++case `echo X|tr X '\101'` in ++ A) # ASCII based system ++ # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr ++ SP2NL='tr \040 \012' ++ NL2SP='tr \015\012 \040\040' ++ ;; ++ *) # EBCDIC based system ++ SP2NL='tr \100 \n' ++ NL2SP='tr \r\n \100\100' ++ ;; ++esac + + # Standard options: + opt_dry_run=false +@@ -208,7 +253,7 @@ opt_verbose=false + # name if it has been set yet. + func_echo () + { +- $ECHO "$progname${mode+: }$mode: $*" ++ $ECHO "$progname${mode+: }$mode: "${1+"$@"} + } + + # func_verbose arg... +@@ -425,18 +470,14 @@ func_show_eval () + } + + +- +- +- + # func_version + # Echo version message to standard output and exit. + func_version () + { + $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / { +- s/^# // +- s/^# *$// +- s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/ +- p ++ s/^# //; s/^# *$//; ++ s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/; ++ p; + }' < "$progpath" + exit $? + } +@@ -446,10 +487,9 @@ func_version () + func_usage () + { + $SED -n '/^# Usage:/,/# -h/ { +- s/^# // +- s/^# *$// +- s/\$progname/'$progname'/ +- p ++ s/^# //; s/^# *$//; ++ s/\$progname/'$progname'/; ++ p; + }' < "$progpath" + $ECHO + $ECHO "run \`$progname --help | more' for full usage" +@@ -461,18 +501,16 @@ func_usage () + func_help () + { + $SED -n '/^# Usage:/,/# Report bugs to/ { +- s/^# // +- s/^# *$// +- s*\$progname*'$progname'* +- s*\$host*'"$host"'* +- s*\$SHELL*'"$SHELL"'* +- s*\$LTCC*'"$LTCC"'* +- s*\$LTCFLAGS*'"$LTCFLAGS"'* +- s*\$LD*'"$LD"'* +- s/\$with_gnu_ld/'"$with_gnu_ld"'/ +- s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/ +- s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/ +- p ++ s/^# //; s/^# *$//; ++ s*\$progname*'$progname'*; ++ s*\$SHELL*'"$SHELL"'*; ++ s*\$LTCC*'"$LTCC"'*; ++ s*\$LTCFLAGS*'"$LTCFLAGS"'*; ++ s*\$LD*'"$LD"'*; ++ s/\$with_gnu_ld/'"$with_gnu_ld"'/; ++ s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/; ++ s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/; ++ p; + }' < "$progpath" + exit $? + } +@@ -489,9 +527,6 @@ func_missing_arg () + exit_cmd=: + + +- +- +- + # Check that we have a working $ECHO. + if test "X$1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. +@@ -526,8 +561,6 @@ execute_dlfiles= + preserve_args= + lo2o="s/\\.lo\$/.${objext}/" + o2lo="s/\\.${objext}\$/.lo/" +-extracted_archives= +-extracted_serial=0 + + opt_dry_run=false + opt_duplicate_deps=false +@@ -743,9 +776,9 @@ The following components of LINK-COMMAND + -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols + -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) + -export-symbols SYMFILE +- try to export only the symbols listed in SYMFILE ++ try to export only the symbols listed in SYMFILE + -export-symbols-regex REGEX +- try to export only the symbols matching REGEX ++ try to export only the symbols matching REGEX + -LLIBDIR search LIBDIR for required installed libraries + -lNAME OUTPUT-FILE requires the installed library libNAME + -module build a library that can dlopened +@@ -761,11 +794,9 @@ The following components of LINK-COMMAND + -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries + -shared only do dynamic linking of libtool libraries + -shrext SUFFIX override the standard shared library file extension +- -static do not do any dynamic linking of uninstalled libtool libraries +- -static-libtool-libs +- do not do any dynamic linking of libtool libraries ++ -static do not do any dynamic linking of libtool libraries + -version-info CURRENT[:REVISION[:AGE]] +- specify library version info [each variable defaults to 0] ++ specify library version info [each variable defaults to 0] + -weak LIBNAME declare that the target provides the LIBNAME interface + + All other options (arguments beginning with \`-') are ignored. +@@ -810,12 +841,15 @@ Otherwise, only FILE itself is deleted u + exit $? + } + +-# Generated shell functions inserted here. +- +- ++# TEST SUITE MARKER ## NON-FUNCTION + # Parse options once, thoroughly. This comes as soon as possible in + # the script to make things like `libtool --version' happen quickly. + { ++ # sed scripts: ++ my_sed_single_opt='1s/^\(..\).*$/\1/;q' ++ my_sed_single_rest='1s/^..\(.*\)$/\1/;q' ++ my_sed_long_opt='1s/^\(-[^=]*\)=.*/\1/;q' ++ my_sed_long_arg='1s/^-[^=]*=//' + + # Shorthand for --mode=foo, only valid as the first argument + case $1 in +@@ -907,11 +941,28 @@ Otherwise, only FILE itself is deleted u + + # Separate optargs to long options: + -dlopen=*|--mode=*|--tag=*) +- func_opt_split "$opt" +- set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"} ++ arg=`$ECHO "X$opt" | $Xsed -e "$my_sed_long_arg"` ++ opt=`$ECHO "X$opt" | $Xsed -e "$my_sed_long_opt"` ++ set dummy "$opt" "$arg" ${1+"$@"} + shift + ;; + ++ # Separate optargs to short options: ++# -x*|-y*) ++# arg=`$ECHO "X$opt" |$Xsed -e "$my_sed_single_rest"` ++# opt=`$ECHO "X$opt" |$Xsed -e "$my_sed_single_opt"` ++# set dummy "$opt" "$arg" ${1+"$@"} ++# shift ++# ;; ++ ++ # Separate non-argument short options: ++# -z*|-z*|-y*) ++# rest=`$ECHO "X$opt" |$Xsed -e "$my_sed_single_rest"` ++# opt=`$ECHO "X$opt" |$Xsed -e "$my_sed_single_opt"` ++# set dummy "$opt" "-$rest" ${1+"$@"} ++# shift ++# ;; ++ + -\?|-h) func_usage ;; + --help) opt_help=: ;; + --version) func_version ;; +@@ -941,6 +992,7 @@ Otherwise, only FILE itself is deleted u + # anything was wrong. + $exit_cmd $EXIT_FAILURE + } ++# TEST SUITE MARKER ## BEGIN SOURCABLE + + # func_check_version_match + # Ensure that we are using m4 macros, and libtool script from the same +@@ -978,38 +1030,6 @@ _LT_EOF + } + + +-## ----------- ## +-## Main. ## +-## ----------- ## +- +-{ +- # Sanity checks first: +- func_check_version_match +- +- if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then +- func_fatal_configuration "not configured to build any kind of library" +- fi +- +- test -z "$mode" && func_fatal_error "error: you must specify a MODE." +- +- +- # Darwin sucks +- eval std_shrext=\"$shrext_cmds\" +- +- +- # Only execute mode is allowed to have -dlopen flags. +- if test -n "$execute_dlfiles" && test "$mode" != execute; then +- func_error "unrecognized option \`-dlopen'" +- $ECHO "$help" 1>&2 +- exit $EXIT_FAILURE +- fi +- +- # Change the help message to a mode-specific one. +- generic_help="$help" +- help="Try \`$progname --help --mode=$mode' for more information." +-} +- +- + # func_lalib_p file + # True iff FILE is a libtool `.la' library or `.lo' object file. + # This function is only a basic sanity check; it will hardly flush out +@@ -1086,6 +1106,9 @@ func_source () + } + + ++# Generated shell functions inserted here. ++ ++ + # func_win32_libid arg + # return the library type of file 'arg' + # +@@ -1105,14 +1128,7 @@ func_win32_libid () + if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | + $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then + win32_nmres=`eval $NM -f posix -A $1 | +- $SED -n -e ' +- 1,100{ +- / I /{ +- s,.*,import, +- p +- q +- } +- }'` ++ $SED -n -e '1,100{/ I /{s,.*,import,;p;q;};}'` + case $win32_nmres in + import*) win32_libid_type="x86 archive import";; + *) win32_libid_type="x86 archive static";; +@@ -1332,33 +1348,31 @@ extern \"C\" { + $ECHO >> "$output_objdir/$my_dlsyms" "\ + + /* The mapping between symbol names and symbols. */ +-typedef struct { +- const char *name; +- void *address; +-} lt_dlsymlist; + " + case $host in + *cygwin* | *mingw* ) + $ECHO >> "$output_objdir/$my_dlsyms" "\ + /* DATA imports from DLLs on WIN32 con't be const, because + runtime relocations are performed -- see ld's documentation +- on pseudo-relocs. */" +- lt_dlsym_const= ;; +- *osf5*) +- echo >> "$output_objdir/$my_dlsyms" "\ +-/* This system does not cope well with relocations in const data */" +- lt_dlsym_const= ;; ++ on pseudo-relocs. */ ++ struct { ++" ++ ;; + *) +- lt_dlsym_const=const ;; ++ $ECHO >> "$output_objdir/$my_dlsyms" "\ ++const struct { ++" ++ ;; + esac + + $ECHO >> "$output_objdir/$my_dlsyms" "\ +-extern $lt_dlsym_const lt_dlsymlist +-lt_${my_prefix}_LTX_preloaded_symbols[]; +-$lt_dlsym_const lt_dlsymlist ++ const char *name; ++ void *address; ++} + lt_${my_prefix}_LTX_preloaded_symbols[] = + {\ +- { \"$my_originator\", (void *) 0 }," ++ { \"$my_originator\", (void *) 0 }, ++" + + eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms" + +@@ -1482,17 +1496,7 @@ func_extract_archives () + esac + func_basename "$my_xlib" + my_xlib="$func_basename_result" +- my_xlib_u=$my_xlib +- while :; do +- case " $extracted_archives " in +- *" $my_xlib_u "*) +- extracted_serial=`expr $extracted_serial + 1` +- my_xlib_u=lt$extracted_serial-$my_xlib ;; +- *) break ;; +- esac +- done +- extracted_archives="$extracted_archives $my_xlib_u" +- my_xdir="$my_gentop/$my_xlib_u" ++ my_xdir="$my_gentop/$my_xlib" + + func_mkdir_p "$my_xdir" + +@@ -1546,44 +1550,6 @@ func_extract_archives () + } + + +- +-# func_write_libtool_object output_name pic_name nonpic_name +-# Create a libtool object file (analogous to a ".la" file), +-# but don't create it if we're doing a dry run. +-func_write_libtool_object () +-{ +- write_libobj=${1} +- if test "$build_libtool_libs" = yes; then +- write_lobj=\'${2}\' +- else +- write_lobj=none +- fi +- +- if test "$build_old_libs" = yes; then +- write_oldobj=\'${3}\' +- else +- write_oldobj=none +- fi +- +- $opt_dry_run || { +- cat >${write_libobj}T < ${libobj}T <> ${libobj}T <> ${libobj}T <> ${libobj}T <> ${libobj}T </dev/null 2>&1; then +- emulate sh +- NULLCMD=: +- # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which +- # is contrary to our usage. Disable this feature. +- alias -g '\${1+\"\$@\"}'='\"\$@\"' +- setopt NO_GLOB_SUBST +-else +- case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac +-fi +-BIN_SH=xpg4; export BIN_SH # for Tru64 +-DUALCASE=1; export DUALCASE # for MKS sh ++ avoid_version=no ++ dlfiles= ++ dlprefiles= ++ dlself=no ++ export_dynamic=no ++ export_symbols= ++ export_symbols_regex= ++ generated= ++ libobjs= ++ ltlibs= ++ module=no ++ no_install=no ++ objs= ++ non_pic_objects= ++ precious_files_regex= ++ prefer_static_libs=no ++ preload=no ++ prev= ++ prevarg= ++ release= ++ rpath= ++ xrpath= ++ perm_rpath= ++ temp_rpath= ++ thread_safe=no ++ vinfo= ++ vinfo_number=no ++ weak_libs= ++ single_module="${wl}-single_module" ++ func_infer_tag $base_compile + +-# The HP-UX ksh and POSIX shell print the target directory to stdout +-# if CDPATH is set. +-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH ++ # We need to know -static, to get the right output filenames. ++ for arg ++ do ++ case $arg in ++ -shared) ++ test "$build_libtool_libs" != yes && \ ++ func_fatal_configuration "can not build a shared library" ++ build_old_libs=no ++ break ++ ;; ++ -all-static | -static) ++ if test "X$arg" = "X-all-static"; then ++ if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then ++ func_warning "complete static linking is impossible in this configuration" ++ fi ++ if test -n "$link_static_flag"; then ++ dlopen_self=$dlopen_self_static ++ # See comment for -static flag below, for more details. ++ compile_command="$compile_command $link_static_flag" ++ finalize_command="$finalize_command $link_static_flag" ++ fi ++ prefer_static_libs=yes ++ else ++ if test -z "$pic_flag" && test -n "$link_static_flag"; then ++ dlopen_self=$dlopen_self_static ++ fi ++ prefer_static_libs=built ++ fi ++ build_libtool_libs=no ++ build_old_libs=yes ++ break ++ ;; ++ esac ++ done + +-relink_command=\"$relink_command\" ++ # See if our shared archives depend on static archives. ++ test -n "$old_archive_from_new_cmds" && build_old_libs=yes + +-# This environment variable determines our operation mode. +-if test \"\$libtool_install_magic\" = \"$magic\"; then +- # install mode needs the following variables: +- generated_by_libtool_version='$macro_version' +- notinst_deplibs='$notinst_deplibs' +-else +- # When we are sourced in execute mode, \$file and \$ECHO are already set. +- if test \"\$libtool_execute_magic\" != \"$magic\"; then +- ECHO=\"$qecho\" +- file=\"\$0\" +- # Make sure echo works. +- if test \"X\$1\" = X--no-reexec; then +- # Discard the --no-reexec flag, and continue. ++ # Go through the arguments, transforming them on the way. ++ while test "$#" -gt 0; do ++ arg="$1" + shift +- elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then +- # Yippee, \$ECHO works! +- : +- else +- # Restart under the correct shell, and then maybe \$ECHO will work. +- exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} +- fi +- fi\ +-" +- $ECHO "\ +- +- # Find the directory that this script lives in. +- thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` +- test \"x\$thisdir\" = \"x\$file\" && thisdir=. +- +- # Follow symbolic links until we get to the real thisdir. +- file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\` +- while test -n \"\$file\"; do +- destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` +- +- # If there was a directory component, then change thisdir. +- if test \"x\$destdir\" != \"x\$file\"; then +- case \"\$destdir\" in +- [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; +- *) thisdir=\"\$thisdir/\$destdir\" ;; +- esac +- fi +- +- file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\` +- file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\` +- done +- +- # Try to get the absolute directory name. +- absdir=\`cd \"\$thisdir\" && pwd\` +- test -n \"\$absdir\" && thisdir=\"\$absdir\" +-" +- +- if test "$fast_install" = yes; then +- $ECHO "\ +- program=lt-'$outputname'$exeext +- progdir=\"\$thisdir/$objdir\" ++ func_quote_for_eval "$arg" ++ qarg="$func_quote_for_eval_unquoted_result" ++ libtool_args="$libtool_args $func_quote_for_eval_result" + +- if test ! -f \"\$progdir/\$program\" || +- { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ +- test \"X\$file\" != \"X\$progdir/\$program\"; }; then ++ # If the previous option needs an argument, assign it. ++ if test -n "$prev"; then ++ case $prev in ++ output) ++ compile_command="$compile_command @OUTPUT@" ++ finalize_command="$finalize_command @OUTPUT@" ++ ;; ++ esac + +- file=\"\$\$-\$program\" ++ case $prev in ++ dlfiles|dlprefiles) ++ if test "$preload" = no; then ++ # Add the symbol object into the linking commands. ++ compile_command="$compile_command @SYMFILE@" ++ finalize_command="$finalize_command @SYMFILE@" ++ preload=yes ++ fi ++ case $arg in ++ *.la | *.lo) ;; # We handle these cases below. ++ force) ++ if test "$dlself" = no; then ++ dlself=needless ++ export_dynamic=yes ++ fi ++ prev= ++ continue ++ ;; ++ self) ++ if test "$prev" = dlprefiles; then ++ dlself=yes ++ elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then ++ dlself=yes ++ else ++ dlself=needless ++ export_dynamic=yes ++ fi ++ prev= ++ continue ++ ;; ++ *) ++ if test "$prev" = dlfiles; then ++ dlfiles="$dlfiles $arg" ++ else ++ dlprefiles="$dlprefiles $arg" ++ fi ++ prev= ++ continue ++ ;; ++ esac ++ ;; ++ expsyms) ++ export_symbols="$arg" ++ test -f "$arg" \ ++ || func_fatal_error "symbol file \`$arg' does not exist" ++ prev= ++ continue ++ ;; ++ expsyms_regex) ++ export_symbols_regex="$arg" ++ prev= ++ continue ++ ;; ++ framework) ++ case $host in ++ *-*-darwin*) ++ case "$deplibs " in ++ *" $qarg.ltframework "*) ;; ++ *) deplibs="$deplibs $qarg.ltframework" # this is fixed later ++ ;; ++ esac ++ ;; ++ esac ++ prev= ++ continue ++ ;; ++ inst_prefix) ++ inst_prefix_dir="$arg" ++ prev= ++ continue ++ ;; ++ objectlist) ++ if test -f "$arg"; then ++ save_arg=$arg ++ moreargs= ++ for fil in `cat "$save_arg"` ++ do ++# moreargs="$moreargs $fil" ++ arg=$fil ++ # A libtool-controlled object. + +- if test ! -d \"\$progdir\"; then +- $MKDIR \"\$progdir\" +- else +- $RM \"\$progdir/\$file\" +- fi" ++ # Check to see that this really is a libtool object. ++ if func_lalib_unsafe_p "$arg"; then ++ pic_object= ++ non_pic_object= + +- $ECHO "\ ++ # Read the .lo file ++ func_source "$arg" + +- # relink executable if necessary +- if test -n \"\$relink_command\"; then +- if relink_command_output=\`eval \$relink_command 2>&1\`; then : +- else +- $ECHO \"\$relink_command_output\" >&2 +- $RM \"\$progdir/\$file\" +- exit 1 +- fi +- fi ++ if test -z "$pic_object" || ++ test -z "$non_pic_object" || ++ test "$pic_object" = none && ++ test "$non_pic_object" = none; then ++ func_fatal_error "cannot find name of object for \`$arg'" ++ fi + +- $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || +- { $RM \"\$progdir/\$program\"; +- $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; } +- $RM \"\$progdir/\$file\" +- fi" +- else +- $ECHO "\ +- program='$outputname' +- progdir=\"\$thisdir/$objdir\" +-" +- fi ++ # Extract subdirectory from the argument. ++ func_dirname "$arg" "/" "" ++ xdir="$func_dirname_result" + +- $ECHO "\ ++ if test "$pic_object" != none; then ++ # Prepend the subdirectory the object is found in. ++ pic_object="$xdir$pic_object" + +- if test -f \"\$progdir/\$program\"; then" ++ if test "$prev" = dlfiles; then ++ if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then ++ dlfiles="$dlfiles $pic_object" ++ prev= ++ continue ++ else ++ # If libtool objects are unsupported, then we need to preload. ++ prev=dlprefiles ++ fi ++ fi + +- # Export our shlibpath_var if we have one. +- if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then +- $ECHO "\ +- # Add our own library path to $shlibpath_var +- $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" ++ # CHECK ME: I think I busted this. -Ossama ++ if test "$prev" = dlprefiles; then ++ # Preload the old-style object. ++ dlprefiles="$dlprefiles $pic_object" ++ prev= ++ fi + +- # Some systems cannot cope with colon-terminated $shlibpath_var +- # The second colon is a workaround for a bug in BeOS R4 sed +- $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` ++ # A PIC object. ++ libobjs="$libobjs $pic_object" ++ arg="$pic_object" ++ fi + +- export $shlibpath_var +-" +- fi ++ # Non-PIC object. ++ if test "$non_pic_object" != none; then ++ # Prepend the subdirectory the object is found in. ++ non_pic_object="$xdir$non_pic_object" + +- # fixup the dll searchpath if we need to. +- if test -n "$dllsearchpath"; then +- $ECHO "\ +- # Add the dll search path components to the executable PATH +- PATH=$dllsearchpath:\$PATH +-" +- fi ++ # A standard non-PIC object ++ non_pic_objects="$non_pic_objects $non_pic_object" ++ if test -z "$pic_object" || test "$pic_object" = none ; then ++ arg="$non_pic_object" ++ fi ++ else ++ # If the PIC object exists, use it instead. ++ # $xdir was prepended to $pic_object above. ++ non_pic_object="$pic_object" ++ non_pic_objects="$non_pic_objects $non_pic_object" ++ fi ++ else ++ # Only an error if not doing a dry-run. ++ if $opt_dry_run; then ++ # Extract subdirectory from the argument. ++ func_dirname "$arg" "/" "" ++ xdir="$func_dirname_result" + +- $ECHO "\ +- if test \"\$libtool_execute_magic\" != \"$magic\"; then +- # Run the actual program with our arguments. +-" +- case $host in +- # Backslashes separate directories on plain windows +- *-*-mingw | *-*-os2*) +- $ECHO "\ +- exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} +-" ++ pic_object=`$ECHO "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` ++ non_pic_object=`$ECHO "X${xdir}${arg}" | $Xsed -e "$lo2o"` ++ libobjs="$libobjs $pic_object" ++ non_pic_objects="$non_pic_objects $non_pic_object" ++ else ++ func_fatal_error "\`$arg' is not a valid libtool object" ++ fi ++ fi ++ done ++ else ++ func_fatal_error "link input file \`$arg' does not exist" ++ fi ++ arg=$save_arg ++ prev= ++ continue ++ ;; ++ precious_regex) ++ precious_files_regex="$arg" ++ prev= ++ continue ++ ;; ++ release) ++ release="-$arg" ++ prev= ++ continue ++ ;; ++ rpath | xrpath) ++ # We need an absolute path. ++ case $arg in ++ [\\/]* | [A-Za-z]:[\\/]*) ;; ++ *) ++ func_fatal_error "only absolute run-paths are allowed" ++ ;; ++ esac ++ if test "$prev" = rpath; then ++ case "$rpath " in ++ *" $arg "*) ;; ++ *) rpath="$rpath $arg" ;; ++ esac ++ else ++ case "$xrpath " in ++ *" $arg "*) ;; ++ *) xrpath="$xrpath $arg" ;; ++ esac ++ fi ++ prev= ++ continue ++ ;; ++ shrext) ++ shrext_cmds="$arg" ++ prev= ++ continue ++ ;; ++ weak) ++ weak_libs="$weak_libs $arg" ++ prev= ++ continue ++ ;; ++ xcclinker) ++ linker_flags="$linker_flags $qarg" ++ compiler_flags="$compiler_flags $qarg" ++ prev= ++ compile_command="$compile_command $qarg" ++ finalize_command="$finalize_command $qarg" ++ continue ++ ;; ++ xcompiler) ++ compiler_flags="$compiler_flags $qarg" ++ prev= ++ compile_command="$compile_command $qarg" ++ finalize_command="$finalize_command $qarg" ++ continue ++ ;; ++ xlinker) ++ linker_flags="$linker_flags $qarg" ++ compiler_flags="$compiler_flags $wl$qarg" ++ prev= ++ compile_command="$compile_command $wl$qarg" ++ finalize_command="$finalize_command $wl$qarg" ++ continue + ;; +- + *) +- $ECHO "\ +- exec \"\$progdir/\$program\" \${1+\"\$@\"} +-" ++ eval "$prev=\"\$arg\"" ++ prev= ++ continue + ;; + esac +- $ECHO "\ +- \$ECHO \"\$0: cannot exec \$program \$*\" +- exit 1 +- fi +- else +- # The program doesn't exist. +- \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 +- \$ECHO \"This script is just a wrapper for \$program.\" 1>&2 +- $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 +- exit 1 +- fi +-fi\ +-" +-} +-# end: func_emit_libtool_wrapper_script +- +-# func_emit_libtool_cwrapperexe_source +-# emit the source code for a wrapper executable on stdout +-# Must ONLY be called from within func_mode_link because +-# it depends on a number of variable set therein. +-func_emit_libtool_cwrapperexe_source () +-{ +- cat < +-#include +-#include +-#include +-#include +-#include +-#include +-#include +-#include ++ fi # test -n "$prev" + +-#if defined(PATH_MAX) +-# define LT_PATHMAX PATH_MAX +-#elif defined(MAXPATHLEN) +-# define LT_PATHMAX MAXPATHLEN +-#else +-# define LT_PATHMAX 1024 +-#endif ++ prevarg="$arg" + +-#ifndef DIR_SEPARATOR +-# define DIR_SEPARATOR '/' +-# define PATH_SEPARATOR ':' +-#endif ++ case $arg in ++ -all-static) ++ # The effects of -all-static are defined in a previous loop. ++ continue ++ ;; + +-#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ +- defined (__OS2__) +-# define HAVE_DOS_BASED_FILE_SYSTEM +-# ifndef DIR_SEPARATOR_2 +-# define DIR_SEPARATOR_2 '\\' +-# endif +-# ifndef PATH_SEPARATOR_2 +-# define PATH_SEPARATOR_2 ';' +-# endif +-#endif ++ -allow-undefined) ++ # FIXME: remove this flag sometime in the future. ++ func_fatal_error "\`-allow-undefined' must not be used because it is the default" ++ ;; + +-#ifndef DIR_SEPARATOR_2 +-# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) +-#else /* DIR_SEPARATOR_2 */ +-# define IS_DIR_SEPARATOR(ch) \ +- (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) +-#endif /* DIR_SEPARATOR_2 */ ++ -avoid-version) ++ avoid_version=yes ++ continue ++ ;; + +-#ifndef PATH_SEPARATOR_2 +-# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) +-#else /* PATH_SEPARATOR_2 */ +-# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) +-#endif /* PATH_SEPARATOR_2 */ ++ -dlopen) ++ prev=dlfiles ++ continue ++ ;; + +-#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) +-#define XFREE(stale) do { \ +- if (stale) { free ((void *) stale); stale = 0; } \ +-} while (0) ++ -dlpreopen) ++ prev=dlprefiles ++ continue ++ ;; + +-/* -DDEBUG is fairly common in CFLAGS. */ +-#undef DEBUG +-#if defined DEBUGWRAPPER +-# define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__) +-#else +-# define DEBUG(format, ...) +-#endif ++ -export-dynamic) ++ export_dynamic=yes ++ continue ++ ;; + +-const char *program_name = NULL; ++ -export-symbols | -export-symbols-regex) ++ if test -n "$export_symbols" || test -n "$export_symbols_regex"; then ++ func_fatal_error "more than one -exported-symbols argument is not allowed" ++ fi ++ if test "X$arg" = "X-export-symbols"; then ++ prev=expsyms ++ else ++ prev=expsyms_regex ++ fi ++ continue ++ ;; + +-void * xmalloc (size_t num); +-char * xstrdup (const char *string); +-const char * base_name (const char *name); +-char * find_executable(const char *wrapper); +-int check_executable(const char *path); +-char * strendzap(char *str, const char *pat); +-void lt_fatal (const char *message, ...); ++ -framework) ++ prev=framework ++ continue ++ ;; + +-int +-main (int argc, char *argv[]) +-{ +- char **newargz; +- int i; ++ -inst-prefix-dir) ++ prev=inst_prefix ++ continue ++ ;; + +- program_name = (char *) xstrdup (base_name (argv[0])); +- DEBUG("(main) argv[0] : %s\n",argv[0]); +- DEBUG("(main) program_name : %s\n",program_name); +- newargz = XMALLOC(char *, argc+2); +-EOF ++ # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* ++ # so, if we see these flags be careful not to treat them like -L ++ -L[A-Z][A-Z]*:*) ++ case $with_gcc/$host in ++ no/*-*-irix* | /*-*-irix*) ++ compile_command="$compile_command $arg" ++ finalize_command="$finalize_command $arg" ++ ;; ++ esac ++ continue ++ ;; + +- cat <= 0) && +- ( +- /* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */ +-#if defined (S_IXOTH) +- ((st.st_mode & S_IXOTH) == S_IXOTH) || +-#endif +-#if defined (S_IXGRP) +- ((st.st_mode & S_IXGRP) == S_IXGRP) || +-#endif +- ((st.st_mode & S_IXUSR) == S_IXUSR)) +- ) +- return 1; +- else +- return 0; +-} ++ -R) ++ prev=xrpath ++ continue ++ ;; + +-/* Searches for the full path of the wrapper. Returns +- newly allocated full path name if found, NULL otherwise */ +-char * +-find_executable (const char* wrapper) +-{ +- int has_slash = 0; +- const char* p; +- const char* p_next; +- /* static buffer for getcwd */ +- char tmp[LT_PATHMAX + 1]; +- int tmp_len; +- char* concat_name; ++ -R*) ++ func_stripname '-R' '' "$arg" ++ dir=$func_stripname_result ++ # We need an absolute path. ++ case $dir in ++ [\\/]* | [A-Za-z]:[\\/]*) ;; ++ *) ++ func_fatal_error "only absolute run-paths are allowed" ++ ;; ++ esac ++ case "$xrpath " in ++ *" $dir "*) ;; ++ *) xrpath="$xrpath $dir" ;; ++ esac ++ continue ++ ;; + +- DEBUG("(find_executable) : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!"); ++ -shared) ++ # The effects of -shared are defined in a previous loop. ++ continue ++ ;; + +- if ((wrapper == NULL) || (*wrapper == '\0')) +- return NULL; ++ -shrext) ++ prev=shrext ++ continue ++ ;; + +- /* Absolute path? */ +-#if defined (HAVE_DOS_BASED_FILE_SYSTEM) +- if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':') +- { +- concat_name = xstrdup (wrapper); +- if (check_executable(concat_name)) +- return concat_name; +- XFREE(concat_name); +- } +- else +- { +-#endif +- if (IS_DIR_SEPARATOR (wrapper[0])) +- { +- concat_name = xstrdup (wrapper); +- if (check_executable(concat_name)) +- return concat_name; +- XFREE(concat_name); +- } +-#if defined (HAVE_DOS_BASED_FILE_SYSTEM) +- } +-#endif ++ -static) ++ # The effects of -static are defined in a previous loop. ++ # We used to do the same as -all-static on platforms that ++ # didn't have a PIC flag, but the assumption that the effects ++ # would be equivalent was wrong. It would break on at least ++ # Digital Unix and AIX. ++ continue ++ ;; + +- for (p = wrapper; *p; p++) +- if (*p == '/') +- { +- has_slash = 1; +- break; +- } +- if (!has_slash) +- { +- /* no slashes; search PATH */ +- const char* path = getenv ("PATH"); +- if (path != NULL) +- { +- for (p = path; *p; p = p_next) +- { +- const char* q; +- size_t p_len; +- for (q = p; *q; q++) +- if (IS_PATH_SEPARATOR(*q)) +- break; +- p_len = q - p; +- p_next = (*q == '\0' ? q : q + 1); +- if (p_len == 0) +- { +- /* empty path: current directory */ +- if (getcwd (tmp, LT_PATHMAX) == NULL) +- lt_fatal ("getcwd failed"); +- tmp_len = strlen(tmp); +- concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1); +- memcpy (concat_name, tmp, tmp_len); +- concat_name[tmp_len] = '/'; +- strcpy (concat_name + tmp_len + 1, wrapper); +- } +- else +- { +- concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1); +- memcpy (concat_name, p, p_len); +- concat_name[p_len] = '/'; +- strcpy (concat_name + p_len + 1, wrapper); +- } +- if (check_executable(concat_name)) +- return concat_name; +- XFREE(concat_name); +- } +- } +- /* not found in PATH; assume curdir */ +- } +- /* Relative path | not found in path: prepend cwd */ +- if (getcwd (tmp, LT_PATHMAX) == NULL) +- lt_fatal ("getcwd failed"); +- tmp_len = strlen(tmp); +- concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1); +- memcpy (concat_name, tmp, tmp_len); +- concat_name[tmp_len] = '/'; +- strcpy (concat_name + tmp_len + 1, wrapper); ++ -thread-safe) ++ thread_safe=yes ++ continue ++ ;; + +- if (check_executable(concat_name)) +- return concat_name; +- XFREE(concat_name); +- return NULL; +-} ++ -version-info) ++ prev=vinfo ++ continue ++ ;; + +-char * +-strendzap(char *str, const char *pat) +-{ +- size_t len, patlen; ++ -version-number) ++ prev=vinfo ++ vinfo_number=yes ++ continue ++ ;; + +- assert(str != NULL); +- assert(pat != NULL); ++ -weak) ++ prev=weak ++ continue ++ ;; + +- len = strlen(str); +- patlen = strlen(pat); ++ -Wc,*) ++ func_stripname '-Wc,' '' "$arg" ++ args=$func_stripname_result ++ arg= ++ save_ifs="$IFS"; IFS=',' ++ for flag in $args; do ++ IFS="$save_ifs" ++ func_quote_for_eval "$flag" ++ arg="$arg $wl$func_quote_for_eval_result" ++ compiler_flags="$compiler_flags $func_quote_for_eval_result" ++ done ++ IFS="$save_ifs" ++ func_stripname ' ' '' "$arg" ++ arg=$func_stripname_result ++ ;; + +- if (patlen <= len) +- { +- str += len - patlen; +- if (strcmp(str, pat) == 0) +- *str = '\0'; +- } +- return str; +-} ++ -Wl,*) ++ func_stripname '-Wl,' '' "$arg" ++ args=$func_stripname_result ++ arg= ++ save_ifs="$IFS"; IFS=',' ++ for flag in $args; do ++ IFS="$save_ifs" ++ func_quote_for_eval "$flag" ++ arg="$arg $wl$func_quote_for_eval_result" ++ compiler_flags="$compiler_flags $wl$func_quote_for_eval_result" ++ linker_flags="$linker_flags $func_quote_for_eval_result" ++ done ++ IFS="$save_ifs" ++ func_stripname ' ' '' "$arg" ++ arg=$func_stripname_result ++ ;; + +-static void +-lt_error_core (int exit_status, const char * mode, +- const char * message, va_list ap) +-{ +- fprintf (stderr, "%s: %s: ", program_name, mode); +- vfprintf (stderr, message, ap); +- fprintf (stderr, ".\n"); ++ -Xcompiler) ++ prev=xcompiler ++ continue ++ ;; + +- if (exit_status >= 0) +- exit (exit_status); +-} ++ -Xlinker) ++ prev=xlinker ++ continue ++ ;; + +-void +-lt_fatal (const char *message, ...) +-{ +- va_list ap; +- va_start (ap, message); +- lt_error_core (EXIT_FAILURE, "FATAL", message, ap); +- va_end (ap); +-} +-EOF +-} +-# end: func_emit_libtool_cwrapperexe_source ++ -XCClinker) ++ prev=xcclinker ++ continue ++ ;; + +-# func_mode_link arg... +-func_mode_link () +-{ +- $opt_debug +- case $host in +- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) +- # It is impossible to link a dll without this setting, and +- # we shouldn't force the makefile maintainer to figure out +- # which system we are compiling for in order to pass an extra +- # flag for every libtool invocation. +- # allow_undefined=no ++ # -64, -mips[0-9] enable 64-bit mode on the SGI compiler ++ # -r[0-9][0-9]* specifies the processor on the SGI compiler ++ # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler ++ # +DA*, +DD* enable 64-bit mode on the HP compiler ++ # -q* pass through compiler args for the IBM compiler ++ # -m*, -t[45]*, -txscale* pass through architecture-specific ++ # compiler args for GCC ++ # @file GCC response files ++ -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ ++ -t[45]*|-txscale*|@*) ++ func_quote_for_eval "$arg" ++ arg="$func_quote_for_eval_result" ++ compile_command="$compile_command $arg" ++ finalize_command="$finalize_command $arg" ++ compiler_flags="$compiler_flags $arg" ++ continue ++ ;; + +- # FIXME: Unfortunately, there are problems with the above when trying +- # to make a dll which has undefined symbols, in which case not +- # even a static library is built. For now, we need to specify +- # -no-undefined on the libtool link line when we can be certain +- # that all symbols are satisfied, otherwise we get a static library. +- allow_undefined=yes +- ;; +- *) +- allow_undefined=yes +- ;; +- esac +- libtool_args=$nonopt +- base_compile="$nonopt $@" +- compile_command=$nonopt +- finalize_command=$nonopt ++ # Some other compiler flag. ++ -* | +*) ++ func_quote_for_eval "$arg" ++ arg="$func_quote_for_eval_result" ++ ;; + +- compile_rpath= +- finalize_rpath= +- compile_shlibpath= +- finalize_shlibpath= +- convenience= +- old_convenience= +- deplibs= +- old_deplibs= +- compiler_flags= +- linker_flags= +- dllsearchpath= +- lib_search_path=`pwd` +- inst_prefix_dir= +- new_inherited_linker_flags= ++ *.$objext) ++ # A standard object. ++ objs="$objs $arg" ++ ;; + +- avoid_version=no +- dlfiles= +- dlprefiles= +- dlself=no +- export_dynamic=no +- export_symbols= +- export_symbols_regex= +- generated= +- libobjs= +- ltlibs= +- module=no +- no_install=no +- objs= +- non_pic_objects= +- precious_files_regex= +- prefer_static_libs=no +- preload=no +- prev= +- prevarg= +- release= +- rpath= +- xrpath= +- perm_rpath= +- temp_rpath= +- thread_safe=no +- vinfo= +- vinfo_number=no +- weak_libs= +- single_module="${wl}-single_module" +- func_infer_tag $base_compile ++ *.lo) ++ # A libtool-controlled object. + +- # We need to know -static, to get the right output filenames. +- for arg +- do +- case $arg in +- -shared) +- test "$build_libtool_libs" != yes && \ +- func_fatal_configuration "can not build a shared library" +- build_old_libs=no +- break +- ;; +- -all-static | -static | -static-libtool-libs) +- case $arg in +- -all-static) +- if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then +- func_warning "complete static linking is impossible in this configuration" +- fi +- if test -n "$link_static_flag"; then +- dlopen_self=$dlopen_self_static +- # See comment for -static flag below, for more details. +- func_append compile_command " $link_static_flag" +- func_append finalize_command " $link_static_flag" +- fi +- prefer_static_libs=yes +- ;; +- -static) +- if test -z "$pic_flag" && test -n "$link_static_flag"; then +- dlopen_self=$dlopen_self_static +- fi +- prefer_static_libs=built +- ;; +- -static-libtool-libs) +- if test -z "$pic_flag" && test -n "$link_static_flag"; then +- dlopen_self=$dlopen_self_static +- fi +- prefer_static_libs=yes +- ;; +- esac +- build_libtool_libs=no +- build_old_libs=yes +- break +- ;; +- esac +- done ++ # Check to see that this really is a libtool object. ++ if func_lalib_unsafe_p "$arg"; then ++ pic_object= ++ non_pic_object= + +- # See if our shared archives depend on static archives. +- test -n "$old_archive_from_new_cmds" && build_old_libs=yes ++ # Read the .lo file ++ func_source "$arg" + +- # Go through the arguments, transforming them on the way. +- while test "$#" -gt 0; do +- arg="$1" +- shift +- func_quote_for_eval "$arg" +- qarg=$func_quote_for_eval_unquoted_result +- func_append libtool_args " $func_quote_for_eval_result" ++ if test -z "$pic_object" || ++ test -z "$non_pic_object" || ++ test "$pic_object" = none && ++ test "$non_pic_object" = none; then ++ func_fatal_error "cannot find name of object for \`$arg'" ++ fi + +- # If the previous option needs an argument, assign it. +- if test -n "$prev"; then +- case $prev in +- output) +- func_append compile_command " @OUTPUT@" +- func_append finalize_command " @OUTPUT@" +- ;; +- esac ++ # Extract subdirectory from the argument. ++ func_dirname "$arg" "/" "" ++ xdir="$func_dirname_result" + +- case $prev in +- dlfiles|dlprefiles) +- if test "$preload" = no; then +- # Add the symbol object into the linking commands. +- func_append compile_command " @SYMFILE@" +- func_append finalize_command " @SYMFILE@" +- preload=yes +- fi +- case $arg in +- *.la | *.lo) ;; # We handle these cases below. +- force) +- if test "$dlself" = no; then +- dlself=needless +- export_dynamic=yes ++ if test "$pic_object" != none; then ++ # Prepend the subdirectory the object is found in. ++ pic_object="$xdir$pic_object" ++ ++ if test "$prev" = dlfiles; then ++ if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then ++ dlfiles="$dlfiles $pic_object" ++ prev= ++ continue ++ else ++ # If libtool objects are unsupported, then we need to preload. ++ prev=dlprefiles ++ fi + fi +- prev= +- continue +- ;; +- self) ++ ++ # CHECK ME: I think I busted this. -Ossama + if test "$prev" = dlprefiles; then +- dlself=yes +- elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then +- dlself=yes +- else +- dlself=needless +- export_dynamic=yes ++ # Preload the old-style object. ++ dlprefiles="$dlprefiles $pic_object" ++ prev= + fi +- prev= +- continue +- ;; +- *) +- if test "$prev" = dlfiles; then +- dlfiles="$dlfiles $arg" +- else +- dlprefiles="$dlprefiles $arg" ++ ++ # A PIC object. ++ libobjs="$libobjs $pic_object" ++ arg="$pic_object" ++ fi ++ ++ # Non-PIC object. ++ if test "$non_pic_object" != none; then ++ # Prepend the subdirectory the object is found in. ++ non_pic_object="$xdir$non_pic_object" ++ ++ # A standard non-PIC object ++ non_pic_objects="$non_pic_objects $non_pic_object" ++ if test -z "$pic_object" || test "$pic_object" = none ; then ++ arg="$non_pic_object" + fi +- prev= +- continue +- ;; +- esac +- ;; +- expsyms) +- export_symbols="$arg" +- test -f "$arg" \ +- || func_fatal_error "symbol file \`$arg' does not exist" +- prev= +- continue +- ;; +- expsyms_regex) +- export_symbols_regex="$arg" +- prev= +- continue +- ;; +- framework) +- case $host in +- *-*-darwin*) +- case "$deplibs " in +- *" $qarg.ltframework "*) ;; +- *) deplibs="$deplibs $qarg.ltframework" # this is fixed later +- ;; +- esac +- ;; +- esac +- prev= +- continue +- ;; +- inst_prefix) +- inst_prefix_dir="$arg" +- prev= +- continue +- ;; +- objectlist) +- if test -f "$arg"; then +- save_arg=$arg +- moreargs= +- for fil in `cat "$save_arg"` +- do +-# moreargs="$moreargs $fil" +- arg=$fil +- # A libtool-controlled object. ++ else ++ # If the PIC object exists, use it instead. ++ # $xdir was prepended to $pic_object above. ++ non_pic_object="$pic_object" ++ non_pic_objects="$non_pic_objects $non_pic_object" ++ fi ++ else ++ # Only an error if not doing a dry-run. ++ if $opt_dry_run; then ++ # Extract subdirectory from the argument. ++ func_dirname "$arg" "/" "" ++ xdir="$func_dirname_result" + +- # Check to see that this really is a libtool object. +- if func_lalib_unsafe_p "$arg"; then +- pic_object= +- non_pic_object= ++ pic_object=`$ECHO "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` ++ non_pic_object=`$ECHO "X${xdir}${arg}" | $Xsed -e "$lo2o"` ++ libobjs="$libobjs $pic_object" ++ non_pic_objects="$non_pic_objects $non_pic_object" ++ else ++ func_fatal_error "\`$arg' is not a valid libtool object" ++ fi ++ fi ++ ;; + +- # Read the .lo file +- func_source "$arg" ++ *.$libext) ++ # An archive. ++ deplibs="$deplibs $arg" ++ old_deplibs="$old_deplibs $arg" ++ continue ++ ;; + +- if test -z "$pic_object" || +- test -z "$non_pic_object" || +- test "$pic_object" = none && +- test "$non_pic_object" = none; then +- func_fatal_error "cannot find name of object for \`$arg'" +- fi ++ *.la) ++ # A libtool-controlled library. + +- # Extract subdirectory from the argument. +- func_dirname "$arg" "/" "" +- xdir="$func_dirname_result" ++ if test "$prev" = dlfiles; then ++ # This library was specified with -dlopen. ++ dlfiles="$dlfiles $arg" ++ prev= ++ elif test "$prev" = dlprefiles; then ++ # The library was specified with -dlpreopen. ++ dlprefiles="$dlprefiles $arg" ++ prev= ++ else ++ deplibs="$deplibs $arg" ++ fi ++ continue ++ ;; + +- if test "$pic_object" != none; then +- # Prepend the subdirectory the object is found in. +- pic_object="$xdir$pic_object" ++ # Some other compiler argument. ++ *) ++ # Unknown arguments in both finalize_command and compile_command need ++ # to be aesthetically quoted because they are evaled later. ++ func_quote_for_eval "$arg" ++ arg="$func_quote_for_eval_result" ++ ;; ++ esac # arg + +- if test "$prev" = dlfiles; then +- if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then +- dlfiles="$dlfiles $pic_object" +- prev= +- continue +- else +- # If libtool objects are unsupported, then we need to preload. +- prev=dlprefiles +- fi +- fi ++ # Now actually substitute the argument into the commands. ++ if test -n "$arg"; then ++ compile_command="$compile_command $arg" ++ finalize_command="$finalize_command $arg" ++ fi ++ done # argument parsing loop + +- # CHECK ME: I think I busted this. -Ossama +- if test "$prev" = dlprefiles; then +- # Preload the old-style object. +- dlprefiles="$dlprefiles $pic_object" +- prev= +- fi ++ test -n "$prev" && \ ++ func_fatal_help "the \`$prevarg' option requires an argument" + +- # A PIC object. +- func_append libobjs " $pic_object" +- arg="$pic_object" +- fi ++ if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then ++ eval arg=\"$export_dynamic_flag_spec\" ++ compile_command="$compile_command $arg" ++ finalize_command="$finalize_command $arg" ++ fi + +- # Non-PIC object. +- if test "$non_pic_object" != none; then +- # Prepend the subdirectory the object is found in. +- non_pic_object="$xdir$non_pic_object" ++ oldlibs= ++ # calculate the name of the file, without its directory ++ func_basename "$output" ++ outputname="$func_basename_result" ++ libobjs_save="$libobjs" + +- # A standard non-PIC object +- func_append non_pic_objects " $non_pic_object" +- if test -z "$pic_object" || test "$pic_object" = none ; then +- arg="$non_pic_object" +- fi +- else +- # If the PIC object exists, use it instead. +- # $xdir was prepended to $pic_object above. +- non_pic_object="$pic_object" +- func_append non_pic_objects " $non_pic_object" +- fi +- else +- # Only an error if not doing a dry-run. +- if $opt_dry_run; then +- # Extract subdirectory from the argument. +- func_dirname "$arg" "/" "" +- xdir="$func_dirname_result" ++ if test -n "$shlibpath_var"; then ++ # get the directories listed in $shlibpath_var ++ eval shlib_search_path=\`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` ++ else ++ shlib_search_path= ++ fi ++ eval sys_lib_search_path=\"$sys_lib_search_path_spec\" ++ eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" + +- func_lo2o "$arg" +- pic_object=$xdir$objdir/$func_lo2o_result +- non_pic_object=$xdir$func_lo2o_result +- func_append libobjs " $pic_object" +- func_append non_pic_objects " $non_pic_object" +- else +- func_fatal_error "\`$arg' is not a valid libtool object" +- fi +- fi +- done +- else +- func_fatal_error "link input file \`$arg' does not exist" +- fi +- arg=$save_arg +- prev= +- continue +- ;; +- precious_regex) +- precious_files_regex="$arg" +- prev= +- continue +- ;; +- release) +- release="-$arg" +- prev= +- continue +- ;; +- rpath | xrpath) +- # We need an absolute path. +- case $arg in +- [\\/]* | [A-Za-z]:[\\/]*) ;; +- *) +- func_fatal_error "only absolute run-paths are allowed" +- ;; +- esac +- if test "$prev" = rpath; then +- case "$rpath " in +- *" $arg "*) ;; +- *) rpath="$rpath $arg" ;; +- esac +- else +- case "$xrpath " in +- *" $arg "*) ;; +- *) xrpath="$xrpath $arg" ;; +- esac +- fi +- prev= +- continue +- ;; +- shrext) +- shrext_cmds="$arg" +- prev= +- continue +- ;; +- weak) +- weak_libs="$weak_libs $arg" +- prev= +- continue +- ;; +- xcclinker) +- linker_flags="$linker_flags $qarg" +- compiler_flags="$compiler_flags $qarg" +- prev= +- func_append compile_command " $qarg" +- func_append finalize_command " $qarg" +- continue +- ;; +- xcompiler) +- compiler_flags="$compiler_flags $qarg" +- prev= +- func_append compile_command " $qarg" +- func_append finalize_command " $qarg" +- continue +- ;; +- xlinker) +- linker_flags="$linker_flags $qarg" +- compiler_flags="$compiler_flags $wl$qarg" +- prev= +- func_append compile_command " $wl$qarg" +- func_append finalize_command " $wl$qarg" +- continue +- ;; +- *) +- eval "$prev=\"\$arg\"" +- prev= +- continue +- ;; +- esac +- fi # test -n "$prev" ++ func_dirname "$output" "/" "" ++ output_objdir="$func_dirname_result$objdir" ++ # Create the object directory. ++ func_mkdir_p "$output_objdir" + +- prevarg="$arg" ++ # Determine the type of output ++ case $output in ++ "") ++ func_fatal_help "you must specify an output file" ++ ;; ++ *.$libext) linkmode=oldlib ;; ++ *.lo | *.$objext) linkmode=obj ;; ++ *.la) linkmode=lib ;; ++ *) linkmode=prog ;; # Anything else should be a program. ++ esac + +- case $arg in +- -all-static) +- # The effects of -all-static are defined in a previous loop. +- continue +- ;; ++ specialdeplibs= + +- -allow-undefined) +- # FIXME: remove this flag sometime in the future. +- func_fatal_error "\`-allow-undefined' must not be used because it is the default" +- ;; ++ libs= ++ # Find all interdependent deplibs by searching for libraries ++ # that are linked more than once (e.g. -la -lb -la) ++ for deplib in $deplibs; do ++ if $opt_duplicate_deps ; then ++ case "$libs " in ++ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; ++ esac ++ fi ++ libs="$libs $deplib" ++ done + +- -avoid-version) +- avoid_version=yes +- continue +- ;; ++ if test "$linkmode" = lib; then ++ libs="$predeps $libs $compiler_lib_search_path $postdeps" + +- -dlopen) +- prev=dlfiles +- continue +- ;; ++ # Compute libraries that are listed more than once in $predeps ++ # $postdeps and mark them as special (i.e., whose duplicates are ++ # not to be eliminated). ++ pre_post_deps= ++ if $opt_duplicate_compiler_generated_deps; then ++ for pre_post_dep in $predeps $postdeps; do ++ case "$pre_post_deps " in ++ *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;; ++ esac ++ pre_post_deps="$pre_post_deps $pre_post_dep" ++ done ++ fi ++ pre_post_deps= ++ fi + +- -dlpreopen) +- prev=dlprefiles +- continue +- ;; ++ deplibs= ++ newdependency_libs= ++ newlib_search_path= ++ need_relink=no # whether we're linking any uninstalled libtool libraries ++ notinst_deplibs= # not-installed libtool libraries ++ notinst_path= # paths that contain not-installed libtool libraries + +- -export-dynamic) +- export_dynamic=yes +- continue ++ case $linkmode in ++ lib) ++ passes="conv dlpreopen link" ++ for file in $dlfiles $dlprefiles; do ++ case $file in ++ *.la) ;; ++ *) ++ func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file" ++ ;; ++ esac ++ done + ;; +- +- -export-symbols | -export-symbols-regex) +- if test -n "$export_symbols" || test -n "$export_symbols_regex"; then +- func_fatal_error "more than one -exported-symbols argument is not allowed" +- fi +- if test "X$arg" = "X-export-symbols"; then +- prev=expsyms +- else +- prev=expsyms_regex +- fi +- continue ++ prog) ++ compile_deplibs= ++ finalize_deplibs= ++ alldeplibs=no ++ newdlfiles= ++ newdlprefiles= ++ passes="conv scan dlopen dlpreopen link" + ;; +- +- -framework) +- prev=framework +- continue ++ *) passes="conv" + ;; ++ esac + +- -inst-prefix-dir) +- prev=inst_prefix +- continue +- ;; ++ for pass in $passes; do ++ # The preopen pass in lib mode reverses $deplibs; put it back here ++ # so that -L comes before libs that need it for instance... ++ if test "$linkmode,$pass" = "lib,link"; then ++ ## FIXME: Find the place where the list is rebuilt in the wrong ++ ## order, and fix it there properly ++ tmp_deplibs= ++ for deplib in $deplibs; do ++ tmp_deplibs="$deplib $tmp_deplibs" ++ done ++ deplibs="$tmp_deplibs" ++ fi + +- # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* +- # so, if we see these flags be careful not to treat them like -L +- -L[A-Z][A-Z]*:*) +- case $with_gcc/$host in +- no/*-*-irix* | /*-*-irix*) +- func_append compile_command " $arg" +- func_append finalize_command " $arg" ++ if test "$linkmode,$pass" = "lib,link" || ++ test "$linkmode,$pass" = "prog,scan"; then ++ libs="$deplibs" ++ deplibs= ++ fi ++ if test "$linkmode" = prog; then ++ case $pass in ++ dlopen) libs="$dlfiles" ;; ++ dlpreopen) libs="$dlprefiles" ;; ++ link) ++ libs="$deplibs %DEPLIBS%" ++ test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs" + ;; + esac +- continue +- ;; ++ fi ++ if test "$linkmode,$pass" = "lib,dlpreopen"; then ++ # Collect and forward deplibs of preopened libtool libs ++ for lib in $dlprefiles; do ++ # Ignore non-libtool-libs ++ dependency_libs= ++ case $lib in ++ *.la) func_source "$lib" ;; ++ esac + +- -L*) +- func_stripname '-L' '' "$arg" +- dir=$func_stripname_result +- # We need an absolute path. +- case $dir in +- [\\/]* | [A-Za-z]:[\\/]*) ;; +- *) +- absdir=`cd "$dir" && pwd` +- test -z "$absdir" && \ +- func_fatal_error "cannot determine absolute directory name of \`$dir'" +- dir="$absdir" +- ;; +- esac +- case "$deplibs " in +- *" -L$dir "*) ;; +- *) +- deplibs="$deplibs -L$dir" +- lib_search_path="$lib_search_path $dir" +- ;; +- esac +- case $host in +- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) +- testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'` +- case :$dllsearchpath: in +- *":$dir:"*) ;; +- *) dllsearchpath="$dllsearchpath:$dir";; +- esac +- case :$dllsearchpath: in +- *":$testbindir:"*) ;; +- *) dllsearchpath="$dllsearchpath:$testbindir";; +- esac +- ;; +- esac +- continue +- ;; ++ # Collect preopened libtool deplibs, except any this library ++ # has declared as weak libs ++ for deplib in $dependency_libs; do ++ deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"` ++ case " $weak_libs " in ++ *" $deplib_base "*) ;; ++ *) deplibs="$deplibs $deplib" ;; ++ esac ++ done ++ done ++ libs="$dlprefiles" ++ fi ++ if test "$pass" = dlopen; then ++ # Collect dlpreopened libraries ++ save_deplibs="$deplibs" ++ deplibs= ++ fi + +- -l*) +- if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then +- case $host in +- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*) +- # These systems don't actually have a C or math library (as such) ++ for deplib in $libs; do ++ lib= ++ found=no ++ case $deplib in ++ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe) ++ if test "$linkmode,$pass" = "prog,link"; then ++ compile_deplibs="$deplib $compile_deplibs" ++ finalize_deplibs="$deplib $finalize_deplibs" ++ else ++ compiler_flags="$compiler_flags $deplib" ++ if test "$linkmode" = lib ; then ++ case "$new_inherited_linker_flags " in ++ *" $deplib "*) ;; ++ * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;; ++ esac ++ fi ++ fi ++ continue ++ ;; ++ -l*) ++ if test "$linkmode" != lib && test "$linkmode" != prog; then ++ func_warning "\`-l' is ignored for archives/objects" ++ continue ++ fi ++ func_stripname '-l' '' "$deplib" ++ name=$func_stripname_result ++ for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do ++ for search_ext in .la $std_shrext .so .a; do ++ # Search the libtool library ++ lib="$searchdir/lib${name}${search_ext}" ++ if test -f "$lib"; then ++ if test "$search_ext" = ".la"; then ++ found=yes ++ else ++ found=no ++ fi ++ break 2 ++ fi ++ done ++ done ++ if test "$found" != yes; then ++ # deplib doesn't seem to be a libtool library ++ if test "$linkmode,$pass" = "prog,link"; then ++ compile_deplibs="$deplib $compile_deplibs" ++ finalize_deplibs="$deplib $finalize_deplibs" ++ else ++ deplibs="$deplib $deplibs" ++ test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" ++ fi + continue ++ else # deplib is a libtool library ++ # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, ++ # We need to do some special things here, and not later. ++ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then ++ case " $predeps $postdeps " in ++ *" $deplib "*) ++ if func_lalib_p "$lib"; then ++ library_names= ++ old_library= ++ func_source "$lib" ++ for l in $old_library $library_names; do ++ ll="$l" ++ done ++ if test "X$ll" = "X$old_library" ; then # only static version available ++ found=no ++ func_dirname "$lib" "" "." ++ ladir="$func_dirname_result" ++ lib=$ladir/$old_library ++ if test "$linkmode,$pass" = "prog,link"; then ++ compile_deplibs="$deplib $compile_deplibs" ++ finalize_deplibs="$deplib $finalize_deplibs" ++ else ++ deplibs="$deplib $deplibs" ++ test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" ++ fi ++ continue ++ fi ++ fi ++ ;; ++ *) ;; ++ esac ++ fi ++ fi ++ ;; # -l ++ *.ltframework) ++ if test "$linkmode,$pass" = "prog,link"; then ++ compile_deplibs="$deplib $compile_deplibs" ++ finalize_deplibs="$deplib $finalize_deplibs" ++ else ++ deplibs="$deplib $deplibs" ++ if test "$linkmode" = lib ; then ++ case "$new_inherited_linker_flags " in ++ *" $deplib "*) ;; ++ * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;; ++ esac ++ fi ++ fi ++ continue ++ ;; ++ -L*) ++ case $linkmode in ++ lib) ++ deplibs="$deplib $deplibs" ++ test "$pass" = conv && continue ++ newdependency_libs="$deplib $newdependency_libs" ++ func_stripname '-L' '' "$deplib" ++ newlib_search_path="$newlib_search_path $func_stripname_result" + ;; +- *-*-os2*) +- # These systems don't actually have a C library (as such) +- test "X$arg" = "X-lc" && continue ++ prog) ++ if test "$pass" = conv; then ++ deplibs="$deplib $deplibs" ++ continue ++ fi ++ if test "$pass" = scan; then ++ deplibs="$deplib $deplibs" ++ else ++ compile_deplibs="$deplib $compile_deplibs" ++ finalize_deplibs="$deplib $finalize_deplibs" ++ fi ++ func_stripname '-L' '' "$deplib" ++ newlib_search_path="$newlib_search_path $func_stripname_result" + ;; +- *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) +- # Do not include libc due to us having libc/libc_r. +- test "X$arg" = "X-lc" && continue ++ *) ++ func_warning "\`-L' is ignored for archives/objects" + ;; +- *-*-rhapsody* | *-*-darwin1.[012]) +- # Rhapsody C and math libraries are in the System framework +- deplibs="$deplibs System.ltframework" ++ esac # linkmode ++ continue ++ ;; # -L ++ -R*) ++ if test "$pass" = link; then ++ func_stripname '-R' '' "$deplib" ++ dir=$func_stripname_result ++ # Make sure the xrpath contains only unique directories. ++ case "$xrpath " in ++ *" $dir "*) ;; ++ *) xrpath="$xrpath $dir" ;; ++ esac ++ fi ++ deplibs="$deplib $deplibs" ++ continue ++ ;; ++ *.la) lib="$deplib" ;; ++ *.$libext) ++ if test "$pass" = conv; then ++ deplibs="$deplib $deplibs" ++ continue ++ fi ++ case $linkmode in ++ lib) ++ # Linking convenience modules into shared libraries is allowed, ++ # but linking other static libraries is non-portable. ++ case " $dlpreconveniencelibs " in ++ *" $lib "*) ;; ++ *) ++ valid_a_lib=no ++ case $deplibs_check_method in ++ match_pattern*) ++ set dummy $deplibs_check_method; shift ++ match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` ++ if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \ ++ | $EGREP "$match_pattern_regex" > /dev/null; then ++ valid_a_lib=yes ++ fi ++ ;; ++ pass_all) ++ valid_a_lib=yes ++ ;; ++ esac ++ if test "$valid_a_lib" != yes; then ++ $ECHO ++ $ECHO "*** Warning: Trying to link with static lib archive $deplib." ++ $ECHO "*** I have the capability to make that library automatically link in when" ++ $ECHO "*** you link to this library. But I can only do this if you have a" ++ $ECHO "*** shared version of the library, which you do not appear to have" ++ $ECHO "*** because the file extensions .$libext of this argument makes me believe" ++ $ECHO "*** that it is just a static archive that I should not use here." ++ else ++ $ECHO ++ $ECHO "*** Warning: Linking the shared library $output against the" ++ $ECHO "*** static library $deplib is not portable!" ++ deplibs="$deplib $deplibs" ++ fi ++ ;; ++ esac + continue + ;; +- *-*-sco3.2v5* | *-*-sco5v6*) +- # Causes problems with __ctype +- test "X$arg" = "X-lc" && continue +- ;; +- *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) +- # Compiler inserts libc in the correct place for threads to work +- test "X$arg" = "X-lc" && continue ++ prog) ++ if test "$pass" != link; then ++ deplibs="$deplib $deplibs" ++ else ++ compile_deplibs="$deplib $compile_deplibs" ++ finalize_deplibs="$deplib $finalize_deplibs" ++ fi ++ continue + ;; +- esac +- elif test "X$arg" = "X-lc_r"; then +- case $host in +- *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) +- # Do not include libc_r directly, use -pthread flag. +- continue +- ;; +- esac +- fi +- deplibs="$deplibs $arg" +- continue +- ;; +- +- -module) +- module=yes +- continue +- ;; +- +- # Tru64 UNIX uses -model [arg] to determine the layout of C++ +- # classes, name mangling, and exception handling. +- # Darwin uses the -arch flag to determine output architecture. +- -model|-arch|-isysroot) +- compiler_flags="$compiler_flags $arg" +- func_append compile_command " $arg" +- func_append finalize_command " $arg" +- prev=xcompiler +- continue +- ;; ++ esac # linkmode ++ ;; # *.$libext ++ *.lo | *.$objext) ++ if test "$pass" = conv; then ++ deplibs="$deplib $deplibs" ++ elif test "$linkmode" = prog; then ++ if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then ++ # If there is no dlopen support or we're linking statically, ++ # we need to preload. ++ newdlprefiles="$newdlprefiles $deplib" ++ compile_deplibs="$deplib $compile_deplibs" ++ finalize_deplibs="$deplib $finalize_deplibs" ++ else ++ newdlfiles="$newdlfiles $deplib" ++ fi ++ fi ++ continue ++ ;; ++ %DEPLIBS%) ++ alldeplibs=yes ++ continue ++ ;; ++ esac # case $deplib + +- -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) +- compiler_flags="$compiler_flags $arg" +- func_append compile_command " $arg" +- func_append finalize_command " $arg" +- case "$new_inherited_linker_flags " in +- *" $arg "*) ;; +- * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;; +- esac +- continue +- ;; ++ if test "$found" = yes || test -f "$lib"; then : ++ else ++ func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'" ++ fi + +- -multi_module) +- single_module="${wl}-multi_module" +- continue +- ;; ++ # Check to see that this really is a libtool archive. ++ func_lalib_unsafe_p "$lib" \ ++ || func_fatal_error "\`$lib' is not a valid libtool archive" + +- -no-fast-install) +- fast_install=no +- continue +- ;; ++ func_dirname "$lib" "" "." ++ ladir="$func_dirname_result" + +- -no-install) +- case $host in +- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin*) +- # The PATH hackery in wrapper scripts is required on Windows +- # and Darwin in order for the loader to find any dlls it needs. +- func_warning "\`-no-install' is ignored for $host" +- func_warning "assuming \`-no-fast-install' instead" +- fast_install=no +- ;; +- *) no_install=yes ;; +- esac +- continue +- ;; ++ dlname= ++ dlopen= ++ dlpreopen= ++ libdir= ++ library_names= ++ old_library= ++ inherited_linker_flags= ++ # If the library was installed with an old release of libtool, ++ # it will not redefine variables installed, or shouldnotlink ++ installed=yes ++ shouldnotlink=no ++ avoidtemprpath= + +- -no-undefined) +- allow_undefined=no +- continue +- ;; + +- -objectlist) +- prev=objectlist +- continue +- ;; ++ # Read the .la file ++ func_source "$lib" + +- -o) prev=output ;; ++ # Convert "-framework foo" to "foo.ltframework" ++ if test -n "$inherited_linker_flags"; then ++ tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'` ++ for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do ++ case " $new_inherited_linker_flags " in ++ *" $tmp_inherited_linker_flag "*) ;; ++ *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";; ++ esac ++ done ++ fi ++ dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` ++ if test "$linkmode,$pass" = "prog,link"; then ++ compile_deplibs="$new_inherited_linker_flags $compile_deplibs" ++ finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs" ++ else ++ compiler_flags="$compiler_flags $inherited_linker_flags" ++ fi ++ if test "$linkmode,$pass" = "lib,link" || ++ test "$linkmode,$pass" = "prog,scan" || ++ { test "$linkmode" != prog && test "$linkmode" != lib; }; then ++ test -n "$dlopen" && dlfiles="$dlfiles $dlopen" ++ test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" ++ fi + +- -precious-files-regex) +- prev=precious_regex +- continue +- ;; ++ if test "$pass" = conv; then ++ # Only check for convenience libraries ++ deplibs="$lib $deplibs" ++ if test -z "$libdir"; then ++ if test -z "$old_library"; then ++ func_fatal_error "cannot find name of link library for \`$lib'" ++ fi ++ # It is a libtool convenience library, so add in its objects. ++ convenience="$convenience $ladir/$objdir/$old_library" ++ old_convenience="$old_convenience $ladir/$objdir/$old_library" ++ elif test "$linkmode" != prog && test "$linkmode" != lib; then ++ func_fatal_error "\`$lib' is not a convenience library" ++ fi ++ tmp_libs= ++ for deplib in $dependency_libs; do ++ deplibs="$deplib $deplibs" ++ if $opt_duplicate_deps ; then ++ case "$tmp_libs " in ++ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; ++ esac ++ fi ++ tmp_libs="$tmp_libs $deplib" ++ done ++ continue ++ fi # $pass = conv + +- -release) +- prev=release +- continue +- ;; + +- -rpath) +- prev=rpath +- continue +- ;; ++ # Get the name of the library we link against. ++ linklib= ++ for l in $old_library $library_names; do ++ linklib="$l" ++ done ++ if test -z "$linklib"; then ++ func_fatal_error "cannot find name of link library for \`$lib'" ++ fi + +- -R) +- prev=xrpath +- continue +- ;; ++ # This library was specified with -dlopen. ++ if test "$pass" = dlopen; then ++ if test -z "$libdir"; then ++ func_fatal_error "cannot -dlopen a convenience library: \`$lib'" ++ fi ++ if test -z "$dlname" || ++ test "$dlopen_support" != yes || ++ test "$build_libtool_libs" = no; then ++ # If there is no dlname, no dlopen support or we're linking ++ # statically, we need to preload. We also need to preload any ++ # dependent libraries so libltdl's deplib preloader doesn't ++ # bomb out in the load deplibs phase. ++ dlprefiles="$dlprefiles $lib $dependency_libs" ++ else ++ newdlfiles="$newdlfiles $lib" ++ fi ++ continue ++ fi # $pass = dlopen + +- -R*) +- func_stripname '-R' '' "$arg" +- dir=$func_stripname_result + # We need an absolute path. +- case $dir in +- [\\/]* | [A-Za-z]:[\\/]*) ;; ++ case $ladir in ++ [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; + *) +- func_fatal_error "only absolute run-paths are allowed" ++ abs_ladir=`cd "$ladir" && pwd` ++ if test -z "$abs_ladir"; then ++ func_warning "cannot determine absolute directory name of \`$ladir'" ++ func_warning "passing it literally to the linker, although it might fail" ++ abs_ladir="$ladir" ++ fi + ;; + esac +- case "$xrpath " in +- *" $dir "*) ;; +- *) xrpath="$xrpath $dir" ;; +- esac +- continue +- ;; +- +- -shared) +- # The effects of -shared are defined in a previous loop. +- continue +- ;; ++ func_basename "$lib" ++ laname="$func_basename_result" + +- -shrext) +- prev=shrext +- continue +- ;; ++ # Find the relevant object directory and library name. ++ if test "X$installed" = Xyes; then ++ if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then ++ func_warning "library \`$lib' was moved." ++ dir="$ladir" ++ absdir="$abs_ladir" ++ libdir="$abs_ladir" ++ else ++ dir="$libdir" ++ absdir="$libdir" ++ fi ++ test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes ++ else ++ if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then ++ dir="$ladir" ++ absdir="$abs_ladir" ++ # Remove this search path later ++ notinst_path="$notinst_path $abs_ladir" ++ else ++ dir="$ladir/$objdir" ++ absdir="$abs_ladir/$objdir" ++ # Remove this search path later ++ notinst_path="$notinst_path $abs_ladir" ++ fi ++ fi # $installed = yes ++ func_stripname 'lib' '.la' "$laname" ++ name=$func_stripname_result + +- -static | -static-libtool-libs) +- # The effects of -static are defined in a previous loop. +- # We used to do the same as -all-static on platforms that +- # didn't have a PIC flag, but the assumption that the effects +- # would be equivalent was wrong. It would break on at least +- # Digital Unix and AIX. +- continue +- ;; +- +- -thread-safe) +- thread_safe=yes +- continue +- ;; +- +- -version-info) +- prev=vinfo +- continue +- ;; +- +- -version-number) +- prev=vinfo +- vinfo_number=yes +- continue +- ;; +- +- -weak) +- prev=weak +- continue +- ;; +- +- -Wc,*) +- func_stripname '-Wc,' '' "$arg" +- args=$func_stripname_result +- arg= +- save_ifs="$IFS"; IFS=',' +- for flag in $args; do +- IFS="$save_ifs" +- func_quote_for_eval "$flag" +- arg="$arg $wl$func_quote_for_eval_result" +- compiler_flags="$compiler_flags $func_quote_for_eval_result" +- done +- IFS="$save_ifs" +- func_stripname ' ' '' "$arg" +- arg=$func_stripname_result +- ;; +- +- -Wl,*) +- func_stripname '-Wl,' '' "$arg" +- args=$func_stripname_result +- arg= +- save_ifs="$IFS"; IFS=',' +- for flag in $args; do +- IFS="$save_ifs" +- func_quote_for_eval "$flag" +- arg="$arg $wl$func_quote_for_eval_result" +- compiler_flags="$compiler_flags $wl$func_quote_for_eval_result" +- linker_flags="$linker_flags $func_quote_for_eval_result" +- done +- IFS="$save_ifs" +- func_stripname ' ' '' "$arg" +- arg=$func_stripname_result +- ;; +- +- -Xcompiler) +- prev=xcompiler +- continue +- ;; +- +- -Xlinker) +- prev=xlinker +- continue +- ;; +- +- -XCClinker) +- prev=xcclinker +- continue +- ;; +- +- # -64, -mips[0-9] enable 64-bit mode on the SGI compiler +- # -r[0-9][0-9]* specifies the processor on the SGI compiler +- # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler +- # +DA*, +DD* enable 64-bit mode on the HP compiler +- # -q* pass through compiler args for the IBM compiler +- # -m*, -t[45]*, -txscale* pass through architecture-specific +- # compiler args for GCC +- # -F/path gives path to uninstalled frameworks, gcc on darwin +- # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC +- # @file GCC response files +- -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ +- -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*) +- func_quote_for_eval "$arg" +- arg="$func_quote_for_eval_result" +- func_append compile_command " $arg" +- func_append finalize_command " $arg" +- compiler_flags="$compiler_flags $arg" +- continue +- ;; +- +- # Some other compiler flag. +- -* | +*) +- func_quote_for_eval "$arg" +- arg="$func_quote_for_eval_result" +- ;; +- +- *.$objext) +- # A standard object. +- objs="$objs $arg" +- ;; ++ # This library was specified with -dlpreopen. ++ if test "$pass" = dlpreopen; then ++ if test -z "$libdir" && test "$linkmode" = prog; then ++ func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'" ++ fi ++ # Prefer using a static library (so that no silly _DYNAMIC symbols ++ # are required to link). ++ if test -n "$old_library"; then ++ newdlprefiles="$newdlprefiles $dir/$old_library" ++ # Keep a list of preopened convenience libraries to check ++ # that they are being used correctly in the link pass. ++ test -z "$libdir" && \ ++ dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library" ++ # Otherwise, use the dlname, so that lt_dlopen finds it. ++ elif test -n "$dlname"; then ++ newdlprefiles="$newdlprefiles $dir/$dlname" ++ else ++ newdlprefiles="$newdlprefiles $dir/$linklib" ++ fi ++ fi # $pass = dlpreopen + +- *.lo) +- # A libtool-controlled object. ++ if test -z "$libdir"; then ++ # Link the convenience library ++ if test "$linkmode" = lib; then ++ deplibs="$dir/$old_library $deplibs" ++ elif test "$linkmode,$pass" = "prog,link"; then ++ compile_deplibs="$dir/$old_library $compile_deplibs" ++ finalize_deplibs="$dir/$old_library $finalize_deplibs" ++ else ++ deplibs="$lib $deplibs" # used for prog,scan pass ++ fi ++ continue ++ fi + +- # Check to see that this really is a libtool object. +- if func_lalib_unsafe_p "$arg"; then +- pic_object= +- non_pic_object= + +- # Read the .lo file +- func_source "$arg" ++ if test "$linkmode" = prog && test "$pass" != link; then ++ newlib_search_path="$newlib_search_path $ladir" ++ deplibs="$lib $deplibs" + +- if test -z "$pic_object" || +- test -z "$non_pic_object" || +- test "$pic_object" = none && +- test "$non_pic_object" = none; then +- func_fatal_error "cannot find name of object for \`$arg'" ++ linkalldeplibs=no ++ if test "$link_all_deplibs" != no || test -z "$library_names" || ++ test "$build_libtool_libs" = no; then ++ linkalldeplibs=yes + fi + +- # Extract subdirectory from the argument. +- func_dirname "$arg" "/" "" +- xdir="$func_dirname_result" +- +- if test "$pic_object" != none; then +- # Prepend the subdirectory the object is found in. +- pic_object="$xdir$pic_object" +- +- if test "$prev" = dlfiles; then +- if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then +- dlfiles="$dlfiles $pic_object" +- prev= +- continue +- else +- # If libtool objects are unsupported, then we need to preload. +- prev=dlprefiles +- fi ++ tmp_libs= ++ for deplib in $dependency_libs; do ++ case $deplib in ++ -L*) func_stripname '-L' '' "$deplib" ++ newlib_search_path="$newlib_search_path $func_stripname_result" ++ ;; ++ esac ++ # Need to link against all dependency_libs? ++ if test "$linkalldeplibs" = yes; then ++ deplibs="$deplib $deplibs" ++ else ++ # Need to hardcode shared library paths ++ # or/and link against static libraries ++ newdependency_libs="$deplib $newdependency_libs" + fi +- +- # CHECK ME: I think I busted this. -Ossama +- if test "$prev" = dlprefiles; then +- # Preload the old-style object. +- dlprefiles="$dlprefiles $pic_object" +- prev= ++ if $opt_duplicate_deps ; then ++ case "$tmp_libs " in ++ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; ++ esac + fi ++ tmp_libs="$tmp_libs $deplib" ++ done # for deplib ++ continue ++ fi # $linkmode = prog... + +- # A PIC object. +- func_append libobjs " $pic_object" +- arg="$pic_object" +- fi ++ if test "$linkmode,$pass" = "prog,link"; then ++ if test -n "$library_names" && ++ { test "$prefer_static_libs" = no || test -z "$old_library"; }; then ++ # We need to hardcode the library path ++ if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then ++ # Make sure the rpath contains only unique directories. ++ case "$temp_rpath " in ++ *"$absdir:"*) ;; ++ *) temp_rpath="$temp_rpath:$absdir" ;; ++ esac ++ fi + +- # Non-PIC object. +- if test "$non_pic_object" != none; then +- # Prepend the subdirectory the object is found in. +- non_pic_object="$xdir$non_pic_object" ++ # Hardcode the library path. ++ # Skip directories that are in the system default run-time ++ # search path. ++ case " $sys_lib_dlsearch_path " in ++ *" $absdir "*) ;; ++ *) ++ case "$compile_rpath " in ++ *" $absdir "*) ;; ++ *) compile_rpath="$compile_rpath $absdir" ++ esac ++ ;; ++ esac ++ case " $sys_lib_dlsearch_path " in ++ *" $libdir "*) ;; ++ *) ++ case "$finalize_rpath " in ++ *" $libdir "*) ;; ++ *) finalize_rpath="$finalize_rpath $libdir" ++ esac ++ ;; ++ esac ++ fi # $linkmode,$pass = prog,link... + +- # A standard non-PIC object +- func_append non_pic_objects " $non_pic_object" +- if test -z "$pic_object" || test "$pic_object" = none ; then +- arg="$non_pic_object" +- fi +- else +- # If the PIC object exists, use it instead. +- # $xdir was prepended to $pic_object above. +- non_pic_object="$pic_object" +- func_append non_pic_objects " $non_pic_object" ++ if test "$alldeplibs" = yes && ++ { test "$deplibs_check_method" = pass_all || ++ { test "$build_libtool_libs" = yes && ++ test -n "$library_names"; }; }; then ++ # We only need to search for static libraries ++ continue + fi +- else +- # Only an error if not doing a dry-run. +- if $opt_dry_run; then +- # Extract subdirectory from the argument. +- func_dirname "$arg" "/" "" +- xdir="$func_dirname_result" ++ fi + +- func_lo2o "$arg" +- pic_object=$xdir$objdir/$func_lo2o_result +- non_pic_object=$xdir$func_lo2o_result +- func_append libobjs " $pic_object" +- func_append non_pic_objects " $non_pic_object" +- else +- func_fatal_error "\`$arg' is not a valid libtool object" +- fi ++ link_static=no # Whether the deplib will be linked statically ++ use_static_libs=$prefer_static_libs ++ if test "$use_static_libs" = built && test "$installed" = yes; then ++ use_static_libs=no + fi +- ;; +- +- *.$libext) +- # An archive. +- deplibs="$deplibs $arg" +- old_deplibs="$old_deplibs $arg" +- continue +- ;; ++ if test -n "$library_names" && ++ { test "$use_static_libs" = no || test -z "$old_library"; }; then ++ case $host in ++ *cygwin* | *mingw*) ++ # No point in relinking DLLs because paths are not encoded ++ notinst_deplibs="$notinst_deplibs $lib" ++ need_relink=no ++ ;; ++ *) ++ if test "$installed" = no; then ++ notinst_deplibs="$notinst_deplibs $lib" ++ need_relink=yes ++ fi ++ ;; ++ esac ++ # This is a shared library + +- *.la) +- # A libtool-controlled library. ++ # Warn about portability, can't link against -module's on some ++ # systems (darwin). Don't bleat about dlopened modules though! ++ dlopenmodule="" ++ for dlpremoduletest in $dlprefiles; do ++ if test "X$dlpremoduletest" = "X$lib"; then ++ dlopenmodule="$dlpremoduletest" ++ break ++ fi ++ done ++ if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then ++ $ECHO ++ if test "$linkmode" = prog; then ++ $ECHO "*** Warning: Linking the executable $output against the loadable module" ++ else ++ $ECHO "*** Warning: Linking the shared library $output against the loadable module" ++ fi ++ $ECHO "*** $linklib is not portable!" ++ fi ++ if test "$linkmode" = lib && ++ test "$hardcode_into_libs" = yes; then ++ # Hardcode the library path. ++ # Skip directories that are in the system default run-time ++ # search path. ++ case " $sys_lib_dlsearch_path " in ++ *" $absdir "*) ;; ++ *) ++ case "$compile_rpath " in ++ *" $absdir "*) ;; ++ *) compile_rpath="$compile_rpath $absdir" ++ esac ++ ;; ++ esac ++ case " $sys_lib_dlsearch_path " in ++ *" $libdir "*) ;; ++ *) ++ case "$finalize_rpath " in ++ *" $libdir "*) ;; ++ *) finalize_rpath="$finalize_rpath $libdir" ++ esac ++ ;; ++ esac ++ fi + +- if test "$prev" = dlfiles; then +- # This library was specified with -dlopen. +- dlfiles="$dlfiles $arg" +- prev= +- elif test "$prev" = dlprefiles; then +- # The library was specified with -dlpreopen. +- dlprefiles="$dlprefiles $arg" +- prev= +- else +- deplibs="$deplibs $arg" +- fi +- continue +- ;; ++ if test -n "$old_archive_from_expsyms_cmds"; then ++ # figure out the soname ++ set dummy $library_names ++ shift ++ realname="$1" ++ shift ++ libname=`eval "\\$ECHO \"$libname_spec\""` ++ # use dlname if we got it. it's perfectly good, no? ++ if test -n "$dlname"; then ++ soname="$dlname" ++ elif test -n "$soname_spec"; then ++ # bleh windows ++ case $host in ++ *cygwin* | mingw*) ++ major=`expr $current - $age` ++ versuffix="-$major" ++ ;; ++ esac ++ eval soname=\"$soname_spec\" ++ else ++ soname="$realname" ++ fi + +- # Some other compiler argument. +- *) +- # Unknown arguments in both finalize_command and compile_command need +- # to be aesthetically quoted because they are evaled later. +- func_quote_for_eval "$arg" +- arg="$func_quote_for_eval_result" +- ;; +- esac # arg ++ # Make a new name for the extract_expsyms_cmds to use ++ soroot="$soname" ++ func_basename "$soroot" ++ soname="$func_basename_result" ++ func_stripname 'lib' '.dll' "$soname" ++ newlib=libimp-$func_stripname_result.a + +- # Now actually substitute the argument into the commands. +- if test -n "$arg"; then +- func_append compile_command " $arg" +- func_append finalize_command " $arg" +- fi +- done # argument parsing loop ++ # If the library has no export list, then create one now ++ if test -f "$output_objdir/$soname-def"; then : ++ else ++ func_echo "extracting exported symbol list from \`$soname'" ++ func_execute_cmds "$extract_expsyms_cmds" 'exit $?' ++ fi + +- test -n "$prev" && \ +- func_fatal_help "the \`$prevarg' option requires an argument" ++ # Create $newlib ++ if test -f "$output_objdir/$newlib"; then :; else ++ func_echo "generating import library for \`$soname'" ++ func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?' ++ fi ++ # make sure the library variables are pointing to the new library ++ dir=$output_objdir ++ linklib=$newlib ++ fi # test -n "$old_archive_from_expsyms_cmds" + +- if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then +- eval arg=\"$export_dynamic_flag_spec\" +- func_append compile_command " $arg" +- func_append finalize_command " $arg" +- fi ++ if test "$linkmode" = prog || test "$mode" != relink; then ++ add_shlibpath= ++ add_dir= ++ add= ++ lib_linked=yes ++ case $hardcode_action in ++ immediate | unsupported) ++ if test "$hardcode_direct" = no; then ++ add="$dir/$linklib" ++ case $host in ++ *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;; ++ *-*-sysv4*uw2*) add_dir="-L$dir" ;; ++ *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ ++ *-*-unixware7*) add_dir="-L$dir" ;; ++ *-*-darwin* ) ++ # if the lib is a (non-dlopened) module then we can not ++ # link against it, someone is ignoring the earlier warnings ++ if /usr/bin/file -L $add 2> /dev/null | ++ $GREP ": [^:]* bundle" >/dev/null ; then ++ if test "X$dlopenmodule" != "X$lib"; then ++ $ECHO "*** Warning: lib $linklib is a module, not a shared library" ++ if test -z "$old_library" ; then ++ $ECHO ++ $ECHO "*** And there doesn't seem to be a static archive available" ++ $ECHO "*** The link will probably fail, sorry" ++ else ++ add="$dir/$old_library" ++ fi ++ elif test -n "$old_library"; then ++ add="$dir/$old_library" ++ fi ++ fi ++ esac ++ elif test "$hardcode_minus_L" = no; then ++ case $host in ++ *-*-sunos*) add_shlibpath="$dir" ;; ++ esac ++ add_dir="-L$dir" ++ add="-l$name" ++ elif test "$hardcode_shlibpath_var" = no; then ++ add_shlibpath="$dir" ++ add="-l$name" ++ else ++ lib_linked=no ++ fi ++ ;; ++ relink) ++ if test "$hardcode_direct" = yes; then ++ add="$dir/$linklib" ++ elif test "$hardcode_minus_L" = yes; then ++ add_dir="-L$dir" ++ # Try looking first in the location we're being installed to. ++ if test -n "$inst_prefix_dir"; then ++ case $libdir in ++ [\\/]*) ++ add_dir="$add_dir -L$inst_prefix_dir$libdir" ++ ;; ++ esac ++ fi ++ add="-l$name" ++ elif test "$hardcode_shlibpath_var" = yes; then ++ add_shlibpath="$dir" ++ add="-l$name" ++ else ++ lib_linked=no ++ fi ++ ;; ++ *) lib_linked=no ;; ++ esac + +- oldlibs= +- # calculate the name of the file, without its directory +- func_basename "$output" +- outputname="$func_basename_result" +- libobjs_save="$libobjs" ++ if test "$lib_linked" != yes; then ++ func_fatal_configuration "unsupported hardcode properties" ++ fi + +- if test -n "$shlibpath_var"; then +- # get the directories listed in $shlibpath_var +- eval shlib_search_path=\`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` +- else +- shlib_search_path= +- fi +- eval sys_lib_search_path=\"$sys_lib_search_path_spec\" +- eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" ++ if test -n "$add_shlibpath"; then ++ case :$compile_shlibpath: in ++ *":$add_shlibpath:"*) ;; ++ *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;; ++ esac ++ fi ++ if test "$linkmode" = prog; then ++ test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" ++ test -n "$add" && compile_deplibs="$add $compile_deplibs" ++ else ++ test -n "$add_dir" && deplibs="$add_dir $deplibs" ++ test -n "$add" && deplibs="$add $deplibs" ++ if test "$hardcode_direct" != yes && ++ test "$hardcode_minus_L" != yes && ++ test "$hardcode_shlibpath_var" = yes; then ++ case :$finalize_shlibpath: in ++ *":$libdir:"*) ;; ++ *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; ++ esac ++ fi ++ fi ++ fi + +- func_dirname "$output" "/" "" +- output_objdir="$func_dirname_result$objdir" +- # Create the object directory. +- func_mkdir_p "$output_objdir" ++ if test "$linkmode" = prog || test "$mode" = relink; then ++ add_shlibpath= ++ add_dir= ++ add= ++ # Finalize command for both is simple: just hardcode it. ++ if test "$hardcode_direct" = yes; then ++ add="$libdir/$linklib" ++ elif test "$hardcode_minus_L" = yes; then ++ add_dir="-L$libdir" ++ add="-l$name" ++ elif test "$hardcode_shlibpath_var" = yes; then ++ case :$finalize_shlibpath: in ++ *":$libdir:"*) ;; ++ *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; ++ esac ++ add="-l$name" ++ elif test "$hardcode_automatic" = yes; then ++ if test -n "$inst_prefix_dir" && ++ test -f "$inst_prefix_dir$libdir/$linklib" ; then ++ add="$inst_prefix_dir$libdir/$linklib" ++ else ++ add="$libdir/$linklib" ++ fi ++ else ++ # We cannot seem to hardcode it, guess we'll fake it. ++ add_dir="-L$libdir" ++ # Try looking first in the location we're being installed to. ++ if test -n "$inst_prefix_dir"; then ++ case $libdir in ++ [\\/]*) ++ add_dir="$add_dir -L$inst_prefix_dir$libdir" ++ ;; ++ esac ++ fi ++ add="-l$name" ++ fi + +- # Determine the type of output +- case $output in +- "") +- func_fatal_help "you must specify an output file" +- ;; +- *.$libext) linkmode=oldlib ;; +- *.lo | *.$objext) linkmode=obj ;; +- *.la) linkmode=lib ;; +- *) linkmode=prog ;; # Anything else should be a program. +- esac ++ if test "$linkmode" = prog; then ++ test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" ++ test -n "$add" && finalize_deplibs="$add $finalize_deplibs" ++ else ++ test -n "$add_dir" && deplibs="$add_dir $deplibs" ++ test -n "$add" && deplibs="$add $deplibs" ++ fi ++ fi ++ elif test "$linkmode" = prog; then ++ # Here we assume that one of hardcode_direct or hardcode_minus_L ++ # is not unsupported. This is valid on all known static and ++ # shared platforms. ++ if test "$hardcode_direct" != unsupported; then ++ test -n "$old_library" && linklib="$old_library" ++ compile_deplibs="$dir/$linklib $compile_deplibs" ++ finalize_deplibs="$dir/$linklib $finalize_deplibs" ++ else ++ compile_deplibs="-l$name -L$dir $compile_deplibs" ++ finalize_deplibs="-l$name -L$dir $finalize_deplibs" ++ fi ++ elif test "$build_libtool_libs" = yes; then ++ # Not a shared library ++ if test "$deplibs_check_method" != pass_all; then ++ # We're trying link a shared library against a static one ++ # but the system doesn't support it. + +- specialdeplibs= ++ # Just print a warning and add the library to dependency_libs so ++ # that the program can be linked against the static library. ++ $ECHO ++ $ECHO "*** Warning: This system can not link to static lib archive $lib." ++ $ECHO "*** I have the capability to make that library automatically link in when" ++ $ECHO "*** you link to this library. But I can only do this if you have a" ++ $ECHO "*** shared version of the library, which you do not appear to have." ++ if test "$module" = yes; then ++ $ECHO "*** But as you try to build a module library, libtool will still create " ++ $ECHO "*** a static module, that should work as long as the dlopening application" ++ $ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime." ++ if test -z "$global_symbol_pipe"; then ++ $ECHO ++ $ECHO "*** However, this would only work if libtool was able to extract symbol" ++ $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could" ++ $ECHO "*** not find such a program. So, this module is probably useless." ++ $ECHO "*** \`nm' from GNU binutils and a full rebuild may help." ++ fi ++ if test "$build_old_libs" = no; then ++ build_libtool_libs=module ++ build_old_libs=yes ++ else ++ build_libtool_libs=no ++ fi ++ fi ++ else ++ deplibs="$dir/$old_library $deplibs" ++ link_static=yes ++ fi ++ fi # link shared/static library? + +- libs= +- # Find all interdependent deplibs by searching for libraries +- # that are linked more than once (e.g. -la -lb -la) +- for deplib in $deplibs; do +- if $opt_duplicate_deps ; then +- case "$libs " in +- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; +- esac +- fi +- libs="$libs $deplib" +- done ++ if test "$linkmode" = lib; then ++ if test -n "$dependency_libs" && ++ { test "$hardcode_into_libs" != yes || ++ test "$build_old_libs" = yes || ++ test "$link_static" = yes; }; then ++ # Extract -R from dependency_libs ++ temp_deplibs= ++ for libdir in $dependency_libs; do ++ case $libdir in ++ -R*) func_stripname '-R' '' "$libdir" ++ temp_xrpath=$func_stripname_result ++ case " $xrpath " in ++ *" $temp_xrpath "*) ;; ++ *) xrpath="$xrpath $temp_xrpath";; ++ esac;; ++ *) temp_deplibs="$temp_deplibs $libdir";; ++ esac ++ done ++ dependency_libs="$temp_deplibs" ++ fi + +- if test "$linkmode" = lib; then +- libs="$predeps $libs $compiler_lib_search_path $postdeps" ++ newlib_search_path="$newlib_search_path $absdir" ++ # Link against this library ++ test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" ++ # ... and its dependency_libs ++ tmp_libs= ++ for deplib in $dependency_libs; do ++ newdependency_libs="$deplib $newdependency_libs" ++ if $opt_duplicate_deps ; then ++ case "$tmp_libs " in ++ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; ++ esac ++ fi ++ tmp_libs="$tmp_libs $deplib" ++ done + +- # Compute libraries that are listed more than once in $predeps +- # $postdeps and mark them as special (i.e., whose duplicates are +- # not to be eliminated). +- pre_post_deps= +- if $opt_duplicate_compiler_generated_deps; then +- for pre_post_dep in $predeps $postdeps; do +- case "$pre_post_deps " in +- *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;; +- esac +- pre_post_deps="$pre_post_deps $pre_post_dep" ++ if test "$link_all_deplibs" != no; then ++ # Add the search paths of all dependency libraries ++ for deplib in $dependency_libs; do ++ case $deplib in ++ -L*) path="$deplib" ;; ++ *.la) ++ func_dirname "$deplib" "" "." ++ dir="$func_dirname_result" ++ # We need an absolute path. ++ case $dir in ++ [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; ++ *) ++ absdir=`cd "$dir" && pwd` ++ if test -z "$absdir"; then ++ func_warning "cannot determine absolute directory name of \`$dir'" ++ absdir="$dir" ++ fi ++ ;; ++ esac ++ if $GREP "^installed=no" $deplib > /dev/null; then ++ case $host in ++ *-*-darwin*) ++ depdepl= ++ eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` ++ if test -n "$deplibrary_names" ; then ++ for tmp in $deplibrary_names ; do ++ depdepl=$tmp ++ done ++ if test -f "$absdir/$objdir/$depdepl" ; then ++ depdepl="$absdir/$objdir/$depdepl" ++ darwin_install_name=`otool -L $depdepl | $SED -n -e '3q;2,2p' | $SED -e 's/(.*//'` ++ darwin_install_name=`$ECHO $darwin_install_name` ++ compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}" ++ linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}" ++ path= ++ fi ++ fi ++ ;; ++ *) ++ path="-L$absdir/$objdir" ++ ;; ++ esac ++ else ++ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` ++ test -z "$libdir" && \ ++ func_fatal_error "\`$deplib' is not a valid libtool archive" ++ test "$absdir" != "$libdir" && \ ++ func_warning "\`$deplib' seems to be moved" ++ ++ path="-L$absdir" ++ fi ++ ;; ++ esac ++ case " $deplibs " in ++ *" $path "*) ;; ++ *) deplibs="$path $deplibs" ;; ++ esac ++ done ++ fi # link_all_deplibs != no ++ fi # linkmode = lib ++ done # for deplib in $libs ++ dependency_libs="$newdependency_libs" ++ if test "$pass" = dlpreopen; then ++ # Link the dlpreopened libraries before other libraries ++ for deplib in $save_deplibs; do ++ deplibs="$deplib $deplibs" + done + fi +- pre_post_deps= +- fi +- +- deplibs= +- newdependency_libs= +- newlib_search_path= +- need_relink=no # whether we're linking any uninstalled libtool libraries +- notinst_deplibs= # not-installed libtool libraries +- notinst_path= # paths that contain not-installed libtool libraries ++ if test "$pass" != dlopen; then ++ if test "$pass" != conv; then ++ # Make sure lib_search_path contains only unique directories. ++ lib_search_path= ++ for dir in $newlib_search_path; do ++ case "$lib_search_path " in ++ *" $dir "*) ;; ++ *) lib_search_path="$lib_search_path $dir" ;; ++ esac ++ done ++ newlib_search_path= ++ fi + +- case $linkmode in +- lib) +- passes="conv dlpreopen link" +- for file in $dlfiles $dlprefiles; do +- case $file in +- *.la) ;; +- *) +- func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file" +- ;; +- esac +- done +- ;; +- prog) +- compile_deplibs= +- finalize_deplibs= +- alldeplibs=no +- newdlfiles= +- newdlprefiles= +- passes="conv scan dlopen dlpreopen link" +- ;; +- *) passes="conv" +- ;; +- esac +- +- for pass in $passes; do +- # The preopen pass in lib mode reverses $deplibs; put it back here +- # so that -L comes before libs that need it for instance... +- if test "$linkmode,$pass" = "lib,link"; then +- ## FIXME: Find the place where the list is rebuilt in the wrong +- ## order, and fix it there properly +- tmp_deplibs= +- for deplib in $deplibs; do +- tmp_deplibs="$deplib $tmp_deplibs" +- done +- deplibs="$tmp_deplibs" +- fi +- +- if test "$linkmode,$pass" = "lib,link" || +- test "$linkmode,$pass" = "prog,scan"; then +- libs="$deplibs" +- deplibs= ++ if test "$linkmode,$pass" != "prog,link"; then ++ vars="deplibs" ++ else ++ vars="compile_deplibs finalize_deplibs" ++ fi ++ for var in $vars dependency_libs; do ++ # Add libraries to $var in reverse order ++ eval tmp_libs=\"\$$var\" ++ new_libs= ++ for deplib in $tmp_libs; do ++ # FIXME: Pedantically, this is the right thing to do, so ++ # that some nasty dependency loop isn't accidentally ++ # broken: ++ #new_libs="$deplib $new_libs" ++ # Pragmatically, this seems to cause very few problems in ++ # practice: ++ case $deplib in ++ -L*) new_libs="$deplib $new_libs" ;; ++ -R*) ;; ++ *) ++ # And here is the reason: when a library appears more ++ # than once as an explicit dependence of a library, or ++ # is implicitly linked in more than once by the ++ # compiler, it is considered special, and multiple ++ # occurrences thereof are not removed. Compare this ++ # with having the same library being listed as a ++ # dependency of multiple other libraries: in this case, ++ # we know (pedantically, we assume) the library does not ++ # need to be listed more than once, so we keep only the ++ # last copy. This is not always right, but it is rare ++ # enough that we require users that really mean to play ++ # such unportable linking tricks to link the library ++ # using -Wl,-lname, so that libtool does not consider it ++ # for duplicate removal. ++ case " $specialdeplibs " in ++ *" $deplib "*) new_libs="$deplib $new_libs" ;; ++ *) ++ case " $new_libs " in ++ *" $deplib "*) ;; ++ *) new_libs="$deplib $new_libs" ;; ++ esac ++ ;; ++ esac ++ ;; ++ esac ++ done ++ tmp_libs= ++ for deplib in $new_libs; do ++ case $deplib in ++ -L*) ++ case " $tmp_libs " in ++ *" $deplib "*) ;; ++ *) tmp_libs="$tmp_libs $deplib" ;; ++ esac ++ ;; ++ *) tmp_libs="$tmp_libs $deplib" ;; ++ esac ++ done ++ eval $var=\"$tmp_libs\" ++ done # for var + fi +- if test "$linkmode" = prog; then +- case $pass in +- dlopen) libs="$dlfiles" ;; +- dlpreopen) libs="$dlprefiles" ;; +- link) +- libs="$deplibs %DEPLIBS%" +- test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs" ++ # Last step: remove runtime libs from dependency_libs ++ # (they stay in deplibs) ++ tmp_libs= ++ for i in $dependency_libs ; do ++ case " $predeps $postdeps $compiler_lib_search_path " in ++ *" $i "*) ++ i="" + ;; + esac +- fi +- if test "$linkmode,$pass" = "lib,dlpreopen"; then +- # Collect and forward deplibs of preopened libtool libs +- for lib in $dlprefiles; do +- # Ignore non-libtool-libs +- dependency_libs= +- case $lib in +- *.la) func_source "$lib" ;; +- esac ++ if test -n "$i" ; then ++ tmp_libs="$tmp_libs $i" ++ fi ++ done ++ dependency_libs=$tmp_libs ++ done # for pass ++ if test "$linkmode" = prog; then ++ dlfiles="$newdlfiles" ++ fi ++ if test "$linkmode" = prog || test "$linkmode" = lib; then ++ dlprefiles="$newdlprefiles" ++ fi + +- # Collect preopened libtool deplibs, except any this library +- # has declared as weak libs +- for deplib in $dependency_libs; do +- deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"` +- case " $weak_libs " in +- *" $deplib_base "*) ;; +- *) deplibs="$deplibs $deplib" ;; +- esac +- done +- done +- libs="$dlprefiles" +- fi +- if test "$pass" = dlopen; then +- # Collect dlpreopened libraries +- save_deplibs="$deplibs" +- deplibs= ++ case $linkmode in ++ oldlib) ++ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then ++ func_warning "\`-dlopen' is ignored for archives" + fi + +- for deplib in $libs; do +- lib= +- found=no +- case $deplib in +- -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) +- if test "$linkmode,$pass" = "prog,link"; then +- compile_deplibs="$deplib $compile_deplibs" +- finalize_deplibs="$deplib $finalize_deplibs" +- else +- compiler_flags="$compiler_flags $deplib" +- if test "$linkmode" = lib ; then +- case "$new_inherited_linker_flags " in +- *" $deplib "*) ;; +- * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;; +- esac +- fi +- fi +- continue +- ;; +- -l*) +- if test "$linkmode" != lib && test "$linkmode" != prog; then +- func_warning "\`-l' is ignored for archives/objects" +- continue +- fi +- func_stripname '-l' '' "$deplib" ++ test -n "$deplibs" && \ ++ func_warning "\`-l' and \`-L' are ignored for archives" ++ ++ ++ test -n "$rpath" && \ ++ func_warning "\`-rpath' is ignored for archives" ++ ++ test -n "$xrpath" && \ ++ func_warning "\`-R' is ignored for archives" ++ ++ test -n "$vinfo" && \ ++ func_warning "\`-version-info/-version-number' is ignored for archives" ++ ++ test -n "$release" && \ ++ func_warning "\`-release' is ignored for archives" ++ ++ test -n "$export_symbols$export_symbols_regex" && \ ++ func_warning "\`-export-symbols' is ignored for archives" ++ ++ # Now set the variables for building old libraries. ++ build_libtool_libs=no ++ oldlibs="$output" ++ objs="$objs$old_deplibs" ++ ;; ++ ++ lib) ++ # Make sure we only generate libraries of the form `libNAME.la'. ++ case $outputname in ++ lib*) ++ func_stripname 'lib' '.la' "$outputname" ++ name=$func_stripname_result ++ eval shared_ext=\"$shrext_cmds\" ++ eval libname=\"$libname_spec\" ++ ;; ++ *) ++ test "$module" = no && \ ++ func_fatal_help "libtool library \`$output' must begin with \`lib'" ++ ++ if test "$need_lib_prefix" != no; then ++ # Add the "lib" prefix for modules if required ++ func_stripname '' '.la' "$outputname" + name=$func_stripname_result +- for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do +- for search_ext in .la $std_shrext .so .a; do +- # Search the libtool library +- lib="$searchdir/lib${name}${search_ext}" +- if test -f "$lib"; then +- if test "$search_ext" = ".la"; then +- found=yes +- else +- found=no +- fi +- break 2 +- fi +- done +- done +- if test "$found" != yes; then +- # deplib doesn't seem to be a libtool library +- if test "$linkmode,$pass" = "prog,link"; then +- compile_deplibs="$deplib $compile_deplibs" +- finalize_deplibs="$deplib $finalize_deplibs" +- else +- deplibs="$deplib $deplibs" +- test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" +- fi +- continue +- else # deplib is a libtool library +- # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, +- # We need to do some special things here, and not later. +- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then +- case " $predeps $postdeps " in +- *" $deplib "*) +- if func_lalib_p "$lib"; then +- library_names= +- old_library= +- func_source "$lib" +- for l in $old_library $library_names; do +- ll="$l" +- done +- if test "X$ll" = "X$old_library" ; then # only static version available +- found=no +- func_dirname "$lib" "" "." +- ladir="$func_dirname_result" +- lib=$ladir/$old_library +- if test "$linkmode,$pass" = "prog,link"; then +- compile_deplibs="$deplib $compile_deplibs" +- finalize_deplibs="$deplib $finalize_deplibs" +- else +- deplibs="$deplib $deplibs" +- test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" +- fi +- continue +- fi +- fi +- ;; +- *) ;; +- esac +- fi +- fi +- ;; # -l +- *.ltframework) +- if test "$linkmode,$pass" = "prog,link"; then +- compile_deplibs="$deplib $compile_deplibs" +- finalize_deplibs="$deplib $finalize_deplibs" +- else +- deplibs="$deplib $deplibs" +- if test "$linkmode" = lib ; then +- case "$new_inherited_linker_flags " in +- *" $deplib "*) ;; +- * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;; +- esac +- fi +- fi +- continue +- ;; +- -L*) +- case $linkmode in +- lib) +- deplibs="$deplib $deplibs" +- test "$pass" = conv && continue +- newdependency_libs="$deplib $newdependency_libs" +- func_stripname '-L' '' "$deplib" +- newlib_search_path="$newlib_search_path $func_stripname_result" +- ;; +- prog) +- if test "$pass" = conv; then +- deplibs="$deplib $deplibs" +- continue +- fi +- if test "$pass" = scan; then +- deplibs="$deplib $deplibs" +- else +- compile_deplibs="$deplib $compile_deplibs" +- finalize_deplibs="$deplib $finalize_deplibs" +- fi +- func_stripname '-L' '' "$deplib" +- newlib_search_path="$newlib_search_path $func_stripname_result" +- ;; +- *) +- func_warning "\`-L' is ignored for archives/objects" +- ;; +- esac # linkmode +- continue +- ;; # -L +- -R*) +- if test "$pass" = link; then +- func_stripname '-R' '' "$deplib" +- dir=$func_stripname_result +- # Make sure the xrpath contains only unique directories. +- case "$xrpath " in +- *" $dir "*) ;; +- *) xrpath="$xrpath $dir" ;; +- esac +- fi +- deplibs="$deplib $deplibs" +- continue +- ;; +- *.la) lib="$deplib" ;; +- *.$libext) +- if test "$pass" = conv; then +- deplibs="$deplib $deplibs" +- continue +- fi +- case $linkmode in +- lib) +- # Linking convenience modules into shared libraries is allowed, +- # but linking other static libraries is non-portable. +- case " $dlpreconveniencelibs " in +- *" $deplib "*) ;; +- *) +- valid_a_lib=no +- case $deplibs_check_method in +- match_pattern*) +- set dummy $deplibs_check_method; shift +- match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` +- if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \ +- | $EGREP "$match_pattern_regex" > /dev/null; then +- valid_a_lib=yes +- fi +- ;; +- pass_all) +- valid_a_lib=yes +- ;; +- esac +- if test "$valid_a_lib" != yes; then +- $ECHO +- $ECHO "*** Warning: Trying to link with static lib archive $deplib." +- $ECHO "*** I have the capability to make that library automatically link in when" +- $ECHO "*** you link to this library. But I can only do this if you have a" +- $ECHO "*** shared version of the library, which you do not appear to have" +- $ECHO "*** because the file extensions .$libext of this argument makes me believe" +- $ECHO "*** that it is just a static archive that I should not use here." +- else +- $ECHO +- $ECHO "*** Warning: Linking the shared library $output against the" +- $ECHO "*** static library $deplib is not portable!" +- deplibs="$deplib $deplibs" +- fi +- ;; +- esac +- continue +- ;; +- prog) +- if test "$pass" != link; then +- deplibs="$deplib $deplibs" +- else +- compile_deplibs="$deplib $compile_deplibs" +- finalize_deplibs="$deplib $finalize_deplibs" +- fi +- continue +- ;; +- esac # linkmode +- ;; # *.$libext +- *.lo | *.$objext) +- if test "$pass" = conv; then +- deplibs="$deplib $deplibs" +- elif test "$linkmode" = prog; then +- if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then +- # If there is no dlopen support or we're linking statically, +- # we need to preload. +- newdlprefiles="$newdlprefiles $deplib" +- compile_deplibs="$deplib $compile_deplibs" +- finalize_deplibs="$deplib $finalize_deplibs" +- else +- newdlfiles="$newdlfiles $deplib" +- fi +- fi +- continue +- ;; +- %DEPLIBS%) +- alldeplibs=yes +- continue +- ;; +- esac # case $deplib ++ eval shared_ext=\"$shrext_cmds\" ++ eval libname=\"$libname_spec\" ++ else ++ func_stripname '' '.la' "$outputname" ++ libname=$func_stripname_result ++ fi ++ ;; ++ esac + +- if test "$found" = yes || test -f "$lib"; then : ++ if test -n "$objs"; then ++ if test "$deplibs_check_method" != pass_all; then ++ func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs" + else +- func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'" ++ $ECHO ++ $ECHO "*** Warning: Linking the shared library $output against the non-libtool" ++ $ECHO "*** objects $objs is not portable!" ++ libobjs="$libobjs $objs" + fi ++ fi + +- # Check to see that this really is a libtool archive. +- func_lalib_unsafe_p "$lib" \ +- || func_fatal_error "\`$lib' is not a valid libtool archive" ++ test "$dlself" != no && \ ++ func_warning "\`-dlopen self' is ignored for libtool libraries" + +- func_dirname "$lib" "" "." +- ladir="$func_dirname_result" ++ set dummy $rpath ++ shift ++ test "$#" -gt 1 && \ ++ func_warning "ignoring multiple \`-rpath's for a libtool library" + +- dlname= +- dlopen= +- dlpreopen= +- libdir= +- library_names= +- old_library= +- inherited_linker_flags= +- # If the library was installed with an old release of libtool, +- # it will not redefine variables installed, or shouldnotlink +- installed=yes +- shouldnotlink=no +- avoidtemprpath= ++ install_libdir="$1" + ++ oldlibs= ++ if test -z "$rpath"; then ++ if test "$build_libtool_libs" = yes; then ++ # Building a libtool convenience library. ++ # Some compilers have problems with a `.al' extension so ++ # convenience libraries should have the same extension an ++ # archive normally would. ++ oldlibs="$output_objdir/$libname.$libext $oldlibs" ++ build_libtool_libs=convenience ++ build_old_libs=yes ++ fi + +- # Read the .la file +- func_source "$lib" ++ test -n "$vinfo" && \ ++ func_warning "\`-version-info/-version-number' is ignored for convenience libraries" + +- # Convert "-framework foo" to "foo.ltframework" +- if test -n "$inherited_linker_flags"; then +- tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'` +- for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do +- case " $new_inherited_linker_flags " in +- *" $tmp_inherited_linker_flag "*) ;; +- *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";; +- esac +- done +- fi +- dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` +- if test "$linkmode,$pass" = "lib,link" || +- test "$linkmode,$pass" = "prog,scan" || +- { test "$linkmode" != prog && test "$linkmode" != lib; }; then +- test -n "$dlopen" && dlfiles="$dlfiles $dlopen" +- test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" +- fi ++ test -n "$release" && \ ++ func_warning "\`-release' is ignored for convenience libraries" ++ else + +- if test "$pass" = conv; then +- # Only check for convenience libraries +- deplibs="$lib $deplibs" +- if test -z "$libdir"; then +- if test -z "$old_library"; then +- func_fatal_error "cannot find name of link library for \`$lib'" +- fi +- # It is a libtool convenience library, so add in its objects. +- convenience="$convenience $ladir/$objdir/$old_library" +- old_convenience="$old_convenience $ladir/$objdir/$old_library" +- elif test "$linkmode" != prog && test "$linkmode" != lib; then +- func_fatal_error "\`$lib' is not a convenience library" +- fi +- tmp_libs= +- for deplib in $dependency_libs; do +- deplibs="$deplib $deplibs" +- if $opt_duplicate_deps ; then +- case "$tmp_libs " in +- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; +- esac +- fi +- tmp_libs="$tmp_libs $deplib" +- done +- continue +- fi # $pass = conv ++ # Parse the version information argument. ++ save_ifs="$IFS"; IFS=':' ++ set dummy $vinfo 0 0 0 ++ shift ++ IFS="$save_ifs" + ++ test -n "$7" && \ ++ func_fatal_help "too many parameters to \`-version-info'" + +- # Get the name of the library we link against. +- linklib= +- for l in $old_library $library_names; do +- linklib="$l" +- done +- if test -z "$linklib"; then +- func_fatal_error "cannot find name of link library for \`$lib'" +- fi ++ # convert absolute version numbers to libtool ages ++ # this retains compatibility with .la files and attempts ++ # to make the code below a bit more comprehensible + +- # This library was specified with -dlopen. +- if test "$pass" = dlopen; then +- if test -z "$libdir"; then +- func_fatal_error "cannot -dlopen a convenience library: \`$lib'" +- fi +- if test -z "$dlname" || +- test "$dlopen_support" != yes || +- test "$build_libtool_libs" = no; then +- # If there is no dlname, no dlopen support or we're linking +- # statically, we need to preload. We also need to preload any +- # dependent libraries so libltdl's deplib preloader doesn't +- # bomb out in the load deplibs phase. +- dlprefiles="$dlprefiles $lib $dependency_libs" +- else +- newdlfiles="$newdlfiles $lib" +- fi +- continue +- fi # $pass = dlopen ++ case $vinfo_number in ++ yes) ++ number_major="$1" ++ number_minor="$2" ++ number_revision="$3" ++ # ++ # There are really only two kinds -- those that ++ # use the current revision as the major version ++ # and those that subtract age and use age as ++ # a minor version. But, then there is irix ++ # which has an extra 1 added just for fun ++ # ++ case $version_type in ++ darwin|linux|osf|windows) ++ current=`expr $number_major + $number_minor` ++ age="$number_minor" ++ revision="$number_revision" ++ ;; ++ freebsd-aout|freebsd-elf|sunos) ++ current="$number_major" ++ revision="$number_minor" ++ age="0" ++ ;; ++ irix|nonstopux) ++ current=`expr $number_major + $number_minor - 1` ++ age="$number_minor" ++ revision="$number_minor" ++ ;; ++ *) ++ $echo "$modename: unknown library version type \`$version_type'" 1>&2 ++ $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 ++ exit $EXIT_FAILURE ++ ;; ++ esac ++ ;; ++ no) ++ current="$1" ++ revision="$2" ++ age="$3" ++ ;; ++ esac + +- # We need an absolute path. +- case $ladir in +- [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; ++ # Check that each of the things are valid numbers. ++ case $current in ++ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) +- abs_ladir=`cd "$ladir" && pwd` +- if test -z "$abs_ladir"; then +- func_warning "cannot determine absolute directory name of \`$ladir'" +- func_warning "passing it literally to the linker, although it might fail" +- abs_ladir="$ladir" +- fi ++ func_error "CURRENT \`$current' must be a nonnegative integer" ++ func_fatal_error "\`$vinfo' is not valid version information" + ;; + esac +- func_basename "$lib" +- laname="$func_basename_result" + +- # Find the relevant object directory and library name. +- if test "X$installed" = Xyes; then +- if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then +- func_warning "library \`$lib' was moved." +- dir="$ladir" +- absdir="$abs_ladir" +- libdir="$abs_ladir" +- else +- dir="$libdir" +- absdir="$libdir" +- fi +- test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes +- else +- if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then +- dir="$ladir" +- absdir="$abs_ladir" +- # Remove this search path later +- notinst_path="$notinst_path $abs_ladir" +- else +- dir="$ladir/$objdir" +- absdir="$abs_ladir/$objdir" +- # Remove this search path later +- notinst_path="$notinst_path $abs_ladir" +- fi +- fi # $installed = yes +- func_stripname 'lib' '.la' "$laname" +- name=$func_stripname_result ++ case $revision in ++ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; ++ *) ++ func_error "REVISION \`$revision' must be a nonnegative integer" ++ func_fatal_error "\`$vinfo' is not valid version information" ++ ;; ++ esac + +- # This library was specified with -dlpreopen. +- if test "$pass" = dlpreopen; then +- if test -z "$libdir" && test "$linkmode" = prog; then +- func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'" +- fi +- # Prefer using a static library (so that no silly _DYNAMIC symbols +- # are required to link). +- if test -n "$old_library"; then +- newdlprefiles="$newdlprefiles $dir/$old_library" +- # Keep a list of preopened convenience libraries to check +- # that they are being used correctly in the link pass. +- test -z "$libdir" && \ +- dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library" +- # Otherwise, use the dlname, so that lt_dlopen finds it. +- elif test -n "$dlname"; then +- newdlprefiles="$newdlprefiles $dir/$dlname" +- else +- newdlprefiles="$newdlprefiles $dir/$linklib" +- fi +- fi # $pass = dlpreopen ++ case $age in ++ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; ++ *) ++ func_error "AGE \`$age' must be a nonnegative integer" ++ func_fatal_error "\`$vinfo' is not valid version information" ++ ;; ++ esac + +- if test -z "$libdir"; then +- # Link the convenience library +- if test "$linkmode" = lib; then +- deplibs="$dir/$old_library $deplibs" +- elif test "$linkmode,$pass" = "prog,link"; then +- compile_deplibs="$dir/$old_library $compile_deplibs" +- finalize_deplibs="$dir/$old_library $finalize_deplibs" +- else +- deplibs="$lib $deplibs" # used for prog,scan pass +- fi +- continue ++ if test "$age" -gt "$current"; then ++ func_error "AGE \`$age' is greater than the current interface number \`$current'" ++ func_fatal_error "\`$vinfo' is not valid version information" + fi + ++ # Calculate the version variables. ++ major= ++ versuffix= ++ verstring= ++ case $version_type in ++ none) ;; + +- if test "$linkmode" = prog && test "$pass" != link; then +- newlib_search_path="$newlib_search_path $ladir" +- deplibs="$lib $deplibs" ++ darwin) ++ # Like Linux, but with the current version available in ++ # verstring for coding it into the library header ++ major=.`expr $current - $age` ++ versuffix="$major.$age.$revision" ++ # Darwin ld doesn't like 0 for these options... ++ minor_current=`expr $current + 1` ++ verstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" ++ ;; + +- linkalldeplibs=no +- if test "$link_all_deplibs" != no || test -z "$library_names" || +- test "$build_libtool_libs" = no; then +- linkalldeplibs=yes +- fi ++ freebsd-aout) ++ major=".$current" ++ versuffix=".$current.$revision"; ++ ;; + +- tmp_libs= +- for deplib in $dependency_libs; do +- case $deplib in +- -L*) func_stripname '-L' '' "$deplib" +- newlib_search_path="$newlib_search_path $func_stripname_result" +- ;; +- esac +- # Need to link against all dependency_libs? +- if test "$linkalldeplibs" = yes; then +- deplibs="$deplib $deplibs" +- else +- # Need to hardcode shared library paths +- # or/and link against static libraries +- newdependency_libs="$deplib $newdependency_libs" +- fi +- if $opt_duplicate_deps ; then +- case "$tmp_libs " in +- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; +- esac +- fi +- tmp_libs="$tmp_libs $deplib" +- done # for deplib +- continue +- fi # $linkmode = prog... ++ freebsd-elf) ++ major=".$current" ++ versuffix=".$current" ++ ;; + +- if test "$linkmode,$pass" = "prog,link"; then +- if test -n "$library_names" && +- { { test "$prefer_static_libs" = no || +- test "$prefer_static_libs,$installed" = "built,yes"; } || +- test -z "$old_library"; }; then +- # We need to hardcode the library path +- if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then +- # Make sure the rpath contains only unique directories. +- case "$temp_rpath:" in +- *"$absdir:"*) ;; +- *) temp_rpath="$temp_rpath$absdir:" ;; +- esac +- fi ++ irix | nonstopux) ++ major=`expr $current - $age + 1` + +- # Hardcode the library path. +- # Skip directories that are in the system default run-time +- # search path. +- case " $sys_lib_dlsearch_path " in +- *" $absdir "*) ;; +- *) +- case "$compile_rpath " in +- *" $absdir "*) ;; +- *) compile_rpath="$compile_rpath $absdir" +- esac +- ;; +- esac +- case " $sys_lib_dlsearch_path " in +- *" $libdir "*) ;; +- *) +- case "$finalize_rpath " in +- *" $libdir "*) ;; +- *) finalize_rpath="$finalize_rpath $libdir" +- esac +- ;; +- esac +- fi # $linkmode,$pass = prog,link... ++ case $version_type in ++ nonstopux) verstring_prefix=nonstopux ;; ++ *) verstring_prefix=sgi ;; ++ esac ++ verstring="$verstring_prefix$major.$revision" + +- if test "$alldeplibs" = yes && +- { test "$deplibs_check_method" = pass_all || +- { test "$build_libtool_libs" = yes && +- test -n "$library_names"; }; }; then +- # We only need to search for static libraries +- continue +- fi +- fi ++ # Add in all the interfaces that we are compatible with. ++ loop=$revision ++ while test "$loop" -ne 0; do ++ iface=`expr $revision - $loop` ++ loop=`expr $loop - 1` ++ verstring="$verstring_prefix$major.$iface:$verstring" ++ done + +- link_static=no # Whether the deplib will be linked statically +- use_static_libs=$prefer_static_libs +- if test "$use_static_libs" = built && test "$installed" = yes; then +- use_static_libs=no +- fi +- if test -n "$library_names" && +- { test "$use_static_libs" = no || test -z "$old_library"; }; then +- case $host in +- *cygwin* | *mingw*) +- # No point in relinking DLLs because paths are not encoded +- notinst_deplibs="$notinst_deplibs $lib" +- need_relink=no ++ # Before this point, $major must not contain `.'. ++ major=.$major ++ versuffix="$major.$revision" ++ ;; ++ ++ linux) ++ major=.`expr $current - $age` ++ versuffix="$major.$age.$revision" ++ ;; ++ ++ osf) ++ major=.`expr $current - $age` ++ versuffix=".$current.$age.$revision" ++ verstring="$current.$age.$revision" ++ ++ # Add in all the interfaces that we are compatible with. ++ loop=$age ++ while test "$loop" -ne 0; do ++ iface=`expr $current - $loop` ++ loop=`expr $loop - 1` ++ verstring="$verstring:${iface}.0" ++ done ++ ++ # Make executables depend on our current version. ++ verstring="$verstring:${current}.0" ++ ;; ++ ++ qnx) ++ major=".$current" ++ versuffix=".$current" ++ ;; ++ ++ sunos) ++ major=".$current" ++ versuffix=".$current.$revision" ++ ;; ++ ++ windows) ++ # Use '-' rather than '.', since we only want one ++ # extension on DOS 8.3 filesystems. ++ major=`expr $current - $age` ++ versuffix="-$major" ++ ;; ++ ++ *) ++ func_fatal_configuration "unknown library version type \`$version_type'" ++ ;; ++ esac ++ ++ # Clear the version info if we defaulted, and they specified a release. ++ if test -z "$vinfo" && test -n "$release"; then ++ major= ++ case $version_type in ++ darwin) ++ # we can't check for "0.0" in archive_cmds due to quoting ++ # problems, so we reset it completely ++ verstring= + ;; + *) +- if test "$installed" = no; then +- notinst_deplibs="$notinst_deplibs $lib" +- need_relink=yes +- fi ++ verstring="0.0" + ;; + esac +- # This is a shared library +- +- # Warn about portability, can't link against -module's on some +- # systems (darwin). Don't bleat about dlopened modules though! +- dlopenmodule="" +- for dlpremoduletest in $dlprefiles; do +- if test "X$dlpremoduletest" = "X$lib"; then +- dlopenmodule="$dlpremoduletest" +- break +- fi +- done +- if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then +- $ECHO +- if test "$linkmode" = prog; then +- $ECHO "*** Warning: Linking the executable $output against the loadable module" +- else +- $ECHO "*** Warning: Linking the shared library $output against the loadable module" +- fi +- $ECHO "*** $linklib is not portable!" ++ if test "$need_version" = no; then ++ versuffix= ++ else ++ versuffix=".0.0" + fi +- if test "$linkmode" = lib && +- test "$hardcode_into_libs" = yes; then +- # Hardcode the library path. +- # Skip directories that are in the system default run-time +- # search path. +- case " $sys_lib_dlsearch_path " in +- *" $absdir "*) ;; +- *) +- case "$compile_rpath " in +- *" $absdir "*) ;; +- *) compile_rpath="$compile_rpath $absdir" +- esac +- ;; +- esac +- case " $sys_lib_dlsearch_path " in +- *" $libdir "*) ;; +- *) +- case "$finalize_rpath " in +- *" $libdir "*) ;; +- *) finalize_rpath="$finalize_rpath $libdir" +- esac +- ;; +- esac ++ fi ++ ++ # Remove version info from name if versioning should be avoided ++ if test "$avoid_version" = yes && test "$need_version" = no; then ++ major= ++ versuffix= ++ verstring="" ++ fi ++ ++ # Check to see if the archive will have undefined symbols. ++ if test "$allow_undefined" = yes; then ++ if test "$allow_undefined_flag" = unsupported; then ++ func_warning "undefined symbols not allowed in $host shared libraries" ++ build_libtool_libs=no ++ build_old_libs=yes + fi ++ else ++ # Don't allow undefined symbols. ++ allow_undefined_flag="$no_undefined_flag" ++ fi + +- if test -n "$old_archive_from_expsyms_cmds"; then +- # figure out the soname +- set dummy $library_names +- shift +- realname="$1" +- shift +- libname=`eval "\\$ECHO \"$libname_spec\""` +- # use dlname if we got it. it's perfectly good, no? +- if test -n "$dlname"; then +- soname="$dlname" +- elif test -n "$soname_spec"; then +- # bleh windows +- case $host in +- *cygwin* | mingw*) +- major=`expr $current - $age` +- versuffix="-$major" +- ;; +- esac +- eval soname=\"$soname_spec\" +- else +- soname="$realname" +- fi ++ fi + +- # Make a new name for the extract_expsyms_cmds to use +- soroot="$soname" +- func_basename "$soroot" +- soname="$func_basename_result" +- func_stripname 'lib' '.dll' "$soname" +- newlib=libimp-$func_stripname_result.a ++ func_generate_dlsyms "$libname" "$libname" "yes" ++ libobjs="$libobjs $symfileobj" + +- # If the library has no export list, then create one now +- if test -f "$output_objdir/$soname-def"; then : +- else +- func_echo "extracting exported symbol list from \`$soname'" +- func_execute_cmds "$extract_expsyms_cmds" 'exit $?' +- fi ++ if test "$mode" != relink; then ++ # Remove our outputs, but don't remove object files since they ++ # may have been created when compiling PIC objects. ++ removelist= ++ tempremovelist=`$ECHO "$output_objdir/*"` ++ for p in $tempremovelist; do ++ case $p in ++ *.$objext) ++ ;; ++ $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) ++ if test "X$precious_files_regex" != "X"; then ++ if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 ++ then ++ continue ++ fi ++ fi ++ removelist="$removelist $p" ++ ;; ++ *) ;; ++ esac ++ done ++ test -n "$removelist" && \ ++ func_show_eval "${RM}r \$removelist" ++ fi + +- # Create $newlib +- if test -f "$output_objdir/$newlib"; then :; else +- func_echo "generating import library for \`$soname'" +- func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?' +- fi +- # make sure the library variables are pointing to the new library +- dir=$output_objdir +- linklib=$newlib +- fi # test -n "$old_archive_from_expsyms_cmds" ++ # Now set the variables for building old libraries. ++ if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then ++ oldlibs="$oldlibs $output_objdir/$libname.$libext" + +- if test "$linkmode" = prog || test "$mode" != relink; then +- add_shlibpath= +- add_dir= +- add= +- lib_linked=yes +- case $hardcode_action in +- immediate | unsupported) +- if test "$hardcode_direct" = no; then +- add="$dir/$linklib" +- case $host in +- *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;; +- *-*-sysv4*uw2*) add_dir="-L$dir" ;; +- *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ +- *-*-unixware7*) add_dir="-L$dir" ;; +- *-*-darwin* ) +- # if the lib is a (non-dlopened) module then we can not +- # link against it, someone is ignoring the earlier warnings +- if /usr/bin/file -L $add 2> /dev/null | +- $GREP ": [^:]* bundle" >/dev/null ; then +- if test "X$dlopenmodule" != "X$lib"; then +- $ECHO "*** Warning: lib $linklib is a module, not a shared library" +- if test -z "$old_library" ; then +- $ECHO +- $ECHO "*** And there doesn't seem to be a static archive available" +- $ECHO "*** The link will probably fail, sorry" +- else +- add="$dir/$old_library" +- fi +- elif test -n "$old_library"; then +- add="$dir/$old_library" +- fi +- fi +- esac +- elif test "$hardcode_minus_L" = no; then +- case $host in +- *-*-sunos*) add_shlibpath="$dir" ;; +- esac +- add_dir="-L$dir" +- add="-l$name" +- elif test "$hardcode_shlibpath_var" = no; then +- add_shlibpath="$dir" +- add="-l$name" ++ # Transform .lo files to .o files. ++ oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` ++ fi ++ ++ # Eliminate all temporary directories. ++ for path in $notinst_path; do ++ lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e 's% $path % %g'` ++ deplibs=`$ECHO "X$deplibs " | $Xsed -e 's% -L$path % %g'` ++ dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e 's% -L$path % %g'` ++ done ++ ++ if test -n "$xrpath"; then ++ # If the user specified any rpath flags, then add them. ++ temp_xrpath= ++ for libdir in $xrpath; do ++ temp_xrpath="$temp_xrpath -R$libdir" ++ case "$finalize_rpath " in ++ *" $libdir "*) ;; ++ *) finalize_rpath="$finalize_rpath $libdir" ;; ++ esac ++ done ++ if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then ++ dependency_libs="$temp_xrpath $dependency_libs" ++ fi ++ fi ++ ++ # Make sure dlfiles contains only unique files that won't be dlpreopened ++ old_dlfiles="$dlfiles" ++ dlfiles= ++ for lib in $old_dlfiles; do ++ case " $dlprefiles $dlfiles " in ++ *" $lib "*) ;; ++ *) dlfiles="$dlfiles $lib" ;; ++ esac ++ done ++ ++ # Make sure dlprefiles contains only unique files ++ old_dlprefiles="$dlprefiles" ++ dlprefiles= ++ for lib in $old_dlprefiles; do ++ case "$dlprefiles " in ++ *" $lib "*) ;; ++ *) dlprefiles="$dlprefiles $lib" ;; ++ esac ++ done ++ ++ if test "$build_libtool_libs" = yes; then ++ if test -n "$rpath"; then ++ case $host in ++ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*) ++ # these systems don't actually have a c library (as such)! ++ ;; ++ *-*-rhapsody* | *-*-darwin1.[012]) ++ # Rhapsody C library is in the System framework ++ deplibs="$deplibs System.ltframework" ++ ;; ++ *-*-netbsd*) ++ # Don't link with libc until the a.out ld.so is fixed. ++ ;; ++ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) ++ # Do not include libc due to us having libc/libc_r. ++ ;; ++ *-*-sco3.2v5* | *-*-sco5v6*) ++ # Causes problems with __ctype ++ ;; ++ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) ++ # Compiler inserts libc in the correct place for threads to work ++ ;; ++ *) ++ # Add libc to deplibs on all other systems if necessary. ++ if test "$build_libtool_need_lc" = "yes"; then ++ deplibs="$deplibs -lc" ++ fi ++ ;; ++ esac ++ fi ++ ++ # Transform deplibs into only deplibs that can be linked in shared. ++ name_save=$name ++ libname_save=$libname ++ release_save=$release ++ versuffix_save=$versuffix ++ major_save=$major ++ # I'm not sure if I'm treating the release correctly. I think ++ # release should show up in the -l (ie -lgmp5) so we don't want to ++ # add it in twice. Is that correct? ++ release="" ++ versuffix="" ++ major="" ++ newdeplibs= ++ droppeddeps=no ++ case $deplibs_check_method in ++ pass_all) ++ # Don't check for shared/static. Everything works. ++ # This might be a little naive. We might want to check ++ # whether the library exists or not. But this is on ++ # osf3 & osf4 and I'm not really sure... Just ++ # implementing what was already the behavior. ++ newdeplibs=$deplibs ++ ;; ++ test_compile) ++ # This code stresses the "libraries are programs" paradigm to its ++ # limits. Maybe even breaks it. We compile a program, linking it ++ # against the deplibs as a proxy for the library. Then we can check ++ # whether they linked in statically or dynamically with ldd. ++ $opt_dry_run || $RM conftest.c ++ cat > conftest.c </dev/null` ++ for potent_lib in $potential_libs; do ++ # Follow soft links. ++ if ls -lLd "$potent_lib" 2>/dev/null | ++ $GREP " -> " >/dev/null; then ++ continue ++ fi ++ # The statement above tries to avoid entering an ++ # endless loop below, in case of cyclic links. ++ # We might still enter an endless loop, since a link ++ # loop can be closed while we follow links, ++ # but so what? ++ potlib="$potent_lib" ++ while test -h "$potlib" 2>/dev/null; do ++ potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` ++ case $potliblink in ++ [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; ++ *) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; ++ esac ++ done ++ if eval $file_magic_cmd \"\$potlib\" 2>/dev/null | ++ $SED -e 10q | ++ $EGREP "$file_magic_regex" > /dev/null; then ++ newdeplibs="$newdeplibs $a_deplib" ++ a_deplib="" ++ break 2 ++ fi ++ done ++ done + fi +- else +- # We cannot seem to hardcode it, guess we'll fake it. +- add_dir="-L$libdir" +- # Try looking first in the location we're being installed to. +- if test -n "$inst_prefix_dir"; then +- case $libdir in +- [\\/]*) +- add_dir="$add_dir -L$inst_prefix_dir$libdir" +- ;; +- esac ++ if test -n "$a_deplib" ; then ++ droppeddeps=yes ++ $ECHO ++ $ECHO "*** Warning: linker path does not have real file for library $a_deplib." ++ $ECHO "*** I have the capability to make that library automatically link in when" ++ $ECHO "*** you link to this library. But I can only do this if you have a" ++ $ECHO "*** shared version of the library, which you do not appear to have" ++ $ECHO "*** because I did check the linker path looking for a file starting" ++ if test -z "$potlib" ; then ++ $ECHO "*** with $libname but no candidates were found. (...for file magic test)" ++ else ++ $ECHO "*** with $libname and none of the candidates passed a file format test" ++ $ECHO "*** using a file magic. Last file checked: $potlib" ++ fi + fi +- add="-l$name" +- fi +- +- if test "$linkmode" = prog; then +- test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" +- test -n "$add" && finalize_deplibs="$add $finalize_deplibs" + else +- test -n "$add_dir" && deplibs="$add_dir $deplibs" +- test -n "$add" && deplibs="$add $deplibs" ++ # Add a -L argument. ++ newdeplibs="$newdeplibs $a_deplib" + fi +- fi +- elif test "$linkmode" = prog; then +- # Here we assume that one of hardcode_direct or hardcode_minus_L +- # is not unsupported. This is valid on all known static and +- # shared platforms. +- if test "$hardcode_direct" != unsupported; then +- test -n "$old_library" && linklib="$old_library" +- compile_deplibs="$dir/$linklib $compile_deplibs" +- finalize_deplibs="$dir/$linklib $finalize_deplibs" +- else +- compile_deplibs="-l$name -L$dir $compile_deplibs" +- finalize_deplibs="-l$name -L$dir $finalize_deplibs" +- fi +- elif test "$build_libtool_libs" = yes; then +- # Not a shared library +- if test "$deplibs_check_method" != pass_all; then +- # We're trying link a shared library against a static one +- # but the system doesn't support it. +- +- # Just print a warning and add the library to dependency_libs so +- # that the program can be linked against the static library. +- $ECHO +- $ECHO "*** Warning: This system can not link to static lib archive $lib." +- $ECHO "*** I have the capability to make that library automatically link in when" +- $ECHO "*** you link to this library. But I can only do this if you have a" +- $ECHO "*** shared version of the library, which you do not appear to have." +- if test "$module" = yes; then +- $ECHO "*** But as you try to build a module library, libtool will still create " +- $ECHO "*** a static module, that should work as long as the dlopening application" +- $ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime." +- if test -z "$global_symbol_pipe"; then +- $ECHO +- $ECHO "*** However, this would only work if libtool was able to extract symbol" +- $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could" +- $ECHO "*** not find such a program. So, this module is probably useless." +- $ECHO "*** \`nm' from GNU binutils and a full rebuild may help." ++ done # Gone through all deplibs. ++ ;; ++ match_pattern*) ++ set dummy $deplibs_check_method; shift ++ match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` ++ for a_deplib in $deplibs; do ++ name=`expr $a_deplib : '-l\(.*\)'` ++ # If $name is empty we are operating on a -L argument. ++ if test -n "$name" && test "$name" != "0"; then ++ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then ++ case " $predeps $postdeps " in ++ *" $a_deplib "*) ++ newdeplibs="$newdeplibs $a_deplib" ++ a_deplib="" ++ ;; ++ esac + fi +- if test "$build_old_libs" = no; then +- build_libtool_libs=module +- build_old_libs=yes +- else +- build_libtool_libs=no ++ if test -n "$a_deplib" ; then ++ libname=`eval "\\$ECHO \"$libname_spec\""` ++ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do ++ potential_libs=`ls $i/$libname[.-]* 2>/dev/null` ++ for potent_lib in $potential_libs; do ++ potlib="$potent_lib" # see symlink-check above in file_magic test ++ if eval "\$ECHO \"X$potent_lib\"" 2>/dev/null | $Xsed -e 10q | \ ++ $EGREP "$match_pattern_regex" > /dev/null; then ++ newdeplibs="$newdeplibs $a_deplib" ++ a_deplib="" ++ break 2 ++ fi ++ done ++ done ++ fi ++ if test -n "$a_deplib" ; then ++ droppeddeps=yes ++ $ECHO ++ $ECHO "*** Warning: linker path does not have real file for library $a_deplib." ++ $ECHO "*** I have the capability to make that library automatically link in when" ++ $ECHO "*** you link to this library. But I can only do this if you have a" ++ $ECHO "*** shared version of the library, which you do not appear to have" ++ $ECHO "*** because I did check the linker path looking for a file starting" ++ if test -z "$potlib" ; then ++ $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)" ++ else ++ $ECHO "*** with $libname and none of the candidates passed a file format test" ++ $ECHO "*** using a regex pattern. Last file checked: $potlib" ++ fi + fi ++ else ++ # Add a -L argument. ++ newdeplibs="$newdeplibs $a_deplib" + fi +- else +- deplibs="$dir/$old_library $deplibs" +- link_static=yes +- fi +- fi # link shared/static library? +- +- if test "$linkmode" = lib; then +- if test -n "$dependency_libs" && +- { test "$hardcode_into_libs" != yes || +- test "$build_old_libs" = yes || +- test "$link_static" = yes; }; then +- # Extract -R from dependency_libs +- temp_deplibs= +- for libdir in $dependency_libs; do +- case $libdir in +- -R*) func_stripname '-R' '' "$libdir" +- temp_xrpath=$func_stripname_result +- case " $xrpath " in +- *" $temp_xrpath "*) ;; +- *) xrpath="$xrpath $temp_xrpath";; +- esac;; +- *) temp_deplibs="$temp_deplibs $libdir";; +- esac ++ done # Gone through all deplibs. ++ ;; ++ none | unknown | *) ++ newdeplibs="" ++ tmp_deplibs=`$ECHO "X $deplibs" | $Xsed \ ++ -e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'` ++ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then ++ for i in $predeps $postdeps ; do ++ # can't use Xsed below, because $i might contain '/' ++ tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"` + done +- dependency_libs="$temp_deplibs" + fi +- +- newlib_search_path="$newlib_search_path $absdir" +- # Link against this library +- test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" +- # ... and its dependency_libs +- tmp_libs= +- for deplib in $dependency_libs; do +- newdependency_libs="$deplib $newdependency_libs" +- if $opt_duplicate_deps ; then +- case "$tmp_libs " in +- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; +- esac ++ if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' | ++ $GREP . >/dev/null; then ++ $ECHO ++ if test "X$deplibs_check_method" = "Xnone"; then ++ $ECHO "*** Warning: inter-library dependencies are not supported in this platform." ++ else ++ $ECHO "*** Warning: inter-library dependencies are not known to be supported." + fi +- tmp_libs="$tmp_libs $deplib" +- done +- +- if test "$link_all_deplibs" != no; then +- # Add the search paths of all dependency libraries +- for deplib in $dependency_libs; do +- case $deplib in +- -L*) path="$deplib" ;; +- *.la) +- func_dirname "$deplib" "" "." +- dir="$func_dirname_result" +- # We need an absolute path. +- case $dir in +- [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; +- *) +- absdir=`cd "$dir" && pwd` +- if test -z "$absdir"; then +- func_warning "cannot determine absolute directory name of \`$dir'" +- absdir="$dir" +- fi +- ;; +- esac +- if $GREP "^installed=no" $deplib > /dev/null; then +- case $host in +- *-*-darwin*) +- depdepl= +- eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` +- if test -n "$deplibrary_names" ; then +- for tmp in $deplibrary_names ; do +- depdepl=$tmp +- done +- if test -f "$absdir/$objdir/$depdepl" ; then +- depdepl="$absdir/$objdir/$depdepl" +- darwin_install_name=`otool -L $depdepl | $SED -n -e '3q;2,2p' | $SED -e 's/(.*//'` +- darwin_install_name=`$ECHO $darwin_install_name` +- if test -z "$darwin_install_name"; then +- darwin_install_name=`otool64 -L $depdepl | $SED -n -e '3q;2,2p' | $SED -e 's/(.*//'` +- darwin_install_name=`$ECHO $darwin_install_name` +- fi +- compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}" +- linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}" +- path= +- fi +- fi +- ;; +- *) +- path="-L$absdir/$objdir" +- ;; +- esac +- else +- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` +- test -z "$libdir" && \ +- func_fatal_error "\`$deplib' is not a valid libtool archive" +- test "$absdir" != "$libdir" && \ +- func_warning "\`$deplib' seems to be moved" +- +- path="-L$absdir" +- fi +- ;; +- esac +- case " $deplibs " in +- *" $path "*) ;; +- *) deplibs="$path $deplibs" ;; +- esac +- done +- fi # link_all_deplibs != no +- fi # linkmode = lib +- done # for deplib in $libs +- if test "$pass" = link; then +- if test "$linkmode" = "prog"; then +- compile_deplibs="$new_inherited_linker_flags $compile_deplibs" +- finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs" +- else +- compiler_flags="$compiler_flags "`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` +- fi +- fi +- dependency_libs="$newdependency_libs" +- if test "$pass" = dlpreopen; then +- # Link the dlpreopened libraries before other libraries +- for deplib in $save_deplibs; do +- deplibs="$deplib $deplibs" +- done +- fi +- if test "$pass" != dlopen; then +- if test "$pass" != conv; then +- # Make sure lib_search_path contains only unique directories. +- lib_search_path= +- for dir in $newlib_search_path; do +- case "$lib_search_path " in +- *" $dir "*) ;; +- *) lib_search_path="$lib_search_path $dir" ;; +- esac +- done +- newlib_search_path= +- fi +- +- if test "$linkmode,$pass" != "prog,link"; then +- vars="deplibs" +- else +- vars="compile_deplibs finalize_deplibs" +- fi +- for var in $vars dependency_libs; do +- # Add libraries to $var in reverse order +- eval tmp_libs=\"\$$var\" +- new_libs= +- for deplib in $tmp_libs; do +- # FIXME: Pedantically, this is the right thing to do, so +- # that some nasty dependency loop isn't accidentally +- # broken: +- #new_libs="$deplib $new_libs" +- # Pragmatically, this seems to cause very few problems in +- # practice: +- case $deplib in +- -L*) new_libs="$deplib $new_libs" ;; +- -R*) ;; +- *) +- # And here is the reason: when a library appears more +- # than once as an explicit dependence of a library, or +- # is implicitly linked in more than once by the +- # compiler, it is considered special, and multiple +- # occurrences thereof are not removed. Compare this +- # with having the same library being listed as a +- # dependency of multiple other libraries: in this case, +- # we know (pedantically, we assume) the library does not +- # need to be listed more than once, so we keep only the +- # last copy. This is not always right, but it is rare +- # enough that we require users that really mean to play +- # such unportable linking tricks to link the library +- # using -Wl,-lname, so that libtool does not consider it +- # for duplicate removal. +- case " $specialdeplibs " in +- *" $deplib "*) new_libs="$deplib $new_libs" ;; +- *) +- case " $new_libs " in +- *" $deplib "*) ;; +- *) new_libs="$deplib $new_libs" ;; +- esac +- ;; +- esac +- ;; +- esac +- done +- tmp_libs= +- for deplib in $new_libs; do +- case $deplib in +- -L*) +- case " $tmp_libs " in +- *" $deplib "*) ;; +- *) tmp_libs="$tmp_libs $deplib" ;; +- esac +- ;; +- *) tmp_libs="$tmp_libs $deplib" ;; +- esac +- done +- eval $var=\"$tmp_libs\" +- done # for var +- fi +- # Last step: remove runtime libs from dependency_libs +- # (they stay in deplibs) +- tmp_libs= +- for i in $dependency_libs ; do +- case " $predeps $postdeps $compiler_lib_search_path " in +- *" $i "*) +- i="" +- ;; +- esac +- if test -n "$i" ; then +- tmp_libs="$tmp_libs $i" +- fi +- done +- dependency_libs=$tmp_libs +- done # for pass +- if test "$linkmode" = prog; then +- dlfiles="$newdlfiles" +- fi +- if test "$linkmode" = prog || test "$linkmode" = lib; then +- dlprefiles="$newdlprefiles" +- fi +- +- case $linkmode in +- oldlib) +- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then +- func_warning "\`-dlopen' is ignored for archives" +- fi +- +- test -n "$deplibs" && \ +- func_warning "\`-l' and \`-L' are ignored for archives" +- +- +- test -n "$rpath" && \ +- func_warning "\`-rpath' is ignored for archives" +- +- test -n "$xrpath" && \ +- func_warning "\`-R' is ignored for archives" +- +- test -n "$vinfo" && \ +- func_warning "\`-version-info/-version-number' is ignored for archives" +- +- test -n "$release" && \ +- func_warning "\`-release' is ignored for archives" +- +- test -n "$export_symbols$export_symbols_regex" && \ +- func_warning "\`-export-symbols' is ignored for archives" +- +- # Now set the variables for building old libraries. +- build_libtool_libs=no +- oldlibs="$output" +- objs="$objs$old_deplibs" +- ;; +- +- lib) +- # Make sure we only generate libraries of the form `libNAME.la'. +- case $outputname in +- lib*) +- func_stripname 'lib' '.la' "$outputname" +- name=$func_stripname_result +- eval shared_ext=\"$shrext_cmds\" +- eval libname=\"$libname_spec\" +- ;; +- *) +- test "$module" = no && \ +- func_fatal_help "libtool library \`$output' must begin with \`lib'" +- +- if test "$need_lib_prefix" != no; then +- # Add the "lib" prefix for modules if required +- func_stripname '' '.la' "$outputname" +- name=$func_stripname_result +- eval shared_ext=\"$shrext_cmds\" +- eval libname=\"$libname_spec\" +- else +- func_stripname '' '.la' "$outputname" +- libname=$func_stripname_result +- fi +- ;; +- esac +- +- if test -n "$objs"; then +- if test "$deplibs_check_method" != pass_all; then +- func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs" +- else +- $ECHO +- $ECHO "*** Warning: Linking the shared library $output against the non-libtool" +- $ECHO "*** objects $objs is not portable!" +- libobjs="$libobjs $objs" +- fi +- fi +- +- test "$dlself" != no && \ +- func_warning "\`-dlopen self' is ignored for libtool libraries" +- +- set dummy $rpath +- shift +- test "$#" -gt 1 && \ +- func_warning "ignoring multiple \`-rpath's for a libtool library" +- +- install_libdir="$1" +- +- oldlibs= +- if test -z "$rpath"; then +- if test "$build_libtool_libs" = yes; then +- # Building a libtool convenience library. +- # Some compilers have problems with a `.al' extension so +- # convenience libraries should have the same extension an +- # archive normally would. +- oldlibs="$output_objdir/$libname.$libext $oldlibs" +- build_libtool_libs=convenience +- build_old_libs=yes +- fi +- +- test -n "$vinfo" && \ +- func_warning "\`-version-info/-version-number' is ignored for convenience libraries" +- +- test -n "$release" && \ +- func_warning "\`-release' is ignored for convenience libraries" +- else +- +- # Parse the version information argument. +- save_ifs="$IFS"; IFS=':' +- set dummy $vinfo 0 0 0 +- shift +- IFS="$save_ifs" +- +- test -n "$7" && \ +- func_fatal_help "too many parameters to \`-version-info'" +- +- # convert absolute version numbers to libtool ages +- # this retains compatibility with .la files and attempts +- # to make the code below a bit more comprehensible +- +- case $vinfo_number in +- yes) +- number_major="$1" +- number_minor="$2" +- number_revision="$3" +- # +- # There are really only two kinds -- those that +- # use the current revision as the major version +- # and those that subtract age and use age as +- # a minor version. But, then there is irix +- # which has an extra 1 added just for fun +- # +- case $version_type in +- darwin|linux|osf|windows|none) +- current=`expr $number_major + $number_minor` +- age="$number_minor" +- revision="$number_revision" +- ;; +- freebsd-aout|freebsd-elf|sunos) +- current="$number_major" +- revision="$number_minor" +- age="0" +- ;; +- irix|nonstopux) +- current=`expr $number_major + $number_minor - 1` +- age="$number_minor" +- revision="$number_minor" +- ;; +- *) +- func_fatal_configuration "$modename: unknown library version type \`$version_type'" +- ;; +- esac +- ;; +- no) +- current="$1" +- revision="$2" +- age="$3" +- ;; +- esac +- +- # Check that each of the things are valid numbers. +- case $current in +- 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; +- *) +- func_error "CURRENT \`$current' must be a nonnegative integer" +- func_fatal_error "\`$vinfo' is not valid version information" +- ;; +- esac +- +- case $revision in +- 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; +- *) +- func_error "REVISION \`$revision' must be a nonnegative integer" +- func_fatal_error "\`$vinfo' is not valid version information" +- ;; +- esac +- +- case $age in +- 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; +- *) +- func_error "AGE \`$age' must be a nonnegative integer" +- func_fatal_error "\`$vinfo' is not valid version information" ++ $ECHO "*** All declared inter-library dependencies are being dropped." ++ droppeddeps=yes ++ fi + ;; + esac ++ versuffix=$versuffix_save ++ major=$major_save ++ release=$release_save ++ libname=$libname_save ++ name=$name_save + +- if test "$age" -gt "$current"; then +- func_error "AGE \`$age' is greater than the current interface number \`$current'" +- func_fatal_error "\`$vinfo' is not valid version information" +- fi +- +- # Calculate the version variables. +- major= +- versuffix= +- verstring= +- case $version_type in +- none) ;; +- +- darwin) +- # Like Linux, but with the current version available in +- # verstring for coding it into the library header +- major=.`expr $current - $age` +- versuffix="$major.$age.$revision" +- # Darwin ld doesn't like 0 for these options... +- minor_current=`expr $current + 1` +- verstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" ++ case $host in ++ *-*-rhapsody* | *-*-darwin1.[012]) ++ # On Rhapsody replace the C library with the System framework ++ newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'` + ;; ++ esac + +- freebsd-aout) +- major=".$current" +- versuffix=".$current.$revision"; +- ;; ++ if test "$droppeddeps" = yes; then ++ if test "$module" = yes; then ++ $ECHO ++ $ECHO "*** Warning: libtool could not satisfy all declared inter-library" ++ $ECHO "*** dependencies of module $libname. Therefore, libtool will create" ++ $ECHO "*** a static module, that should work as long as the dlopening" ++ $ECHO "*** application is linked with the -dlopen flag." ++ if test -z "$global_symbol_pipe"; then ++ $ECHO ++ $ECHO "*** However, this would only work if libtool was able to extract symbol" ++ $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could" ++ $ECHO "*** not find such a program. So, this module is probably useless." ++ $ECHO "*** \`nm' from GNU binutils and a full rebuild may help." ++ fi ++ if test "$build_old_libs" = no; then ++ oldlibs="$output_objdir/$libname.$libext" ++ build_libtool_libs=module ++ build_old_libs=yes ++ else ++ build_libtool_libs=no ++ fi ++ else ++ $ECHO "*** The inter-library dependencies that have been dropped here will be" ++ $ECHO "*** automatically added whenever a program is linked with this library" ++ $ECHO "*** or is declared to -dlopen it." + +- freebsd-elf) +- major=".$current" +- versuffix=".$current" ++ if test "$allow_undefined" = no; then ++ $ECHO ++ $ECHO "*** Since this library must not contain undefined symbols," ++ $ECHO "*** because either the platform does not support them or" ++ $ECHO "*** it was explicitly requested with -no-undefined," ++ $ECHO "*** libtool will only create a static version of it." ++ if test "$build_old_libs" = no; then ++ oldlibs="$output_objdir/$libname.$libext" ++ build_libtool_libs=module ++ build_old_libs=yes ++ else ++ build_libtool_libs=no ++ fi ++ fi ++ fi ++ fi ++ # Done checking deplibs! ++ deplibs=$newdeplibs ++ fi ++ # Time to change all our "foo.ltframework" stuff back to "-framework foo" ++ case $host in ++ *-*-darwin*) ++ newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` ++ new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` ++ deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` + ;; ++ esac + +- irix | nonstopux) +- major=`expr $current - $age + 1` +- +- case $version_type in +- nonstopux) verstring_prefix=nonstopux ;; +- *) verstring_prefix=sgi ;; ++ # move library search paths that coincide with paths to not yet ++ # installed libraries to the beginning of the library search list ++ new_libs= ++ for path in $notinst_path; do ++ case " $new_libs " in ++ *" -L$path/$objdir "*) ;; ++ *) ++ case " $deplibs " in ++ *" -L$path/$objdir "*) ++ new_libs="$new_libs -L$path/$objdir" ;; + esac +- verstring="$verstring_prefix$major.$revision" +- +- # Add in all the interfaces that we are compatible with. +- loop=$revision +- while test "$loop" -ne 0; do +- iface=`expr $revision - $loop` +- loop=`expr $loop - 1` +- verstring="$verstring_prefix$major.$iface:$verstring" +- done +- +- # Before this point, $major must not contain `.'. +- major=.$major +- versuffix="$major.$revision" + ;; +- +- linux) +- major=.`expr $current - $age` +- versuffix="$major.$age.$revision" ++ esac ++ done ++ for deplib in $deplibs; do ++ case $deplib in ++ -L*) ++ case " $new_libs " in ++ *" $deplib "*) ;; ++ *) new_libs="$new_libs $deplib" ;; ++ esac + ;; ++ *) new_libs="$new_libs $deplib" ;; ++ esac ++ done ++ deplibs="$new_libs" + +- osf) +- major=.`expr $current - $age` +- versuffix=".$current.$age.$revision" +- verstring="$current.$age.$revision" ++ # All the library-specific variables (install_libdir is set above). ++ library_names= ++ old_library= ++ dlname= + +- # Add in all the interfaces that we are compatible with. +- loop=$age +- while test "$loop" -ne 0; do +- iface=`expr $current - $loop` +- loop=`expr $loop - 1` +- verstring="$verstring:${iface}.0" ++ # Test again, we may have decided not to build it any more ++ if test "$build_libtool_libs" = yes; then ++ if test "$hardcode_into_libs" = yes; then ++ # Hardcode the library paths ++ hardcode_libdirs= ++ dep_rpath= ++ rpath="$finalize_rpath" ++ test "$mode" != relink && rpath="$compile_rpath$rpath" ++ for libdir in $rpath; do ++ if test -n "$hardcode_libdir_flag_spec"; then ++ if test -n "$hardcode_libdir_separator"; then ++ if test -z "$hardcode_libdirs"; then ++ hardcode_libdirs="$libdir" ++ else ++ # Just accumulate the unique libdirs. ++ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in ++ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ++ ;; ++ *) ++ hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" ++ ;; ++ esac ++ fi ++ else ++ eval flag=\"$hardcode_libdir_flag_spec\" ++ dep_rpath="$dep_rpath $flag" ++ fi ++ elif test -n "$runpath_var"; then ++ case "$perm_rpath " in ++ *" $libdir "*) ;; ++ *) perm_rpath="$perm_rpath $libdir" ;; ++ esac ++ fi + done ++ # Substitute the hardcoded libdirs into the rpath. ++ if test -n "$hardcode_libdir_separator" && ++ test -n "$hardcode_libdirs"; then ++ libdir="$hardcode_libdirs" ++ if test -n "$hardcode_libdir_flag_spec_ld"; then ++ eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" ++ else ++ eval dep_rpath=\"$hardcode_libdir_flag_spec\" ++ fi ++ fi ++ if test -n "$runpath_var" && test -n "$perm_rpath"; then ++ # We should set the runpath_var. ++ rpath= ++ for dir in $perm_rpath; do ++ rpath="$rpath$dir:" ++ done ++ eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" ++ fi ++ test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" ++ fi + +- # Make executables depend on our current version. +- verstring="$verstring:${current}.0" +- ;; ++ shlibpath="$finalize_shlibpath" ++ test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath" ++ if test -n "$shlibpath"; then ++ eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" ++ fi + +- qnx) +- major=".$current" +- versuffix=".$current" +- ;; ++ # Get the real and link names of the library. ++ eval shared_ext=\"$shrext_cmds\" ++ eval library_names=\"$library_names_spec\" ++ set dummy $library_names ++ shift ++ realname="$1" ++ shift + +- sunos) +- major=".$current" +- versuffix=".$current.$revision" +- ;; ++ if test -n "$soname_spec"; then ++ eval soname=\"$soname_spec\" ++ else ++ soname="$realname" ++ fi ++ if test -z "$dlname"; then ++ dlname=$soname ++ fi + +- windows) +- # Use '-' rather than '.', since we only want one +- # extension on DOS 8.3 filesystems. +- major=`expr $current - $age` +- versuffix="-$major" +- ;; ++ lib="$output_objdir/$realname" ++ linknames= ++ for link ++ do ++ linknames="$linknames $link" ++ done + +- *) +- func_fatal_configuration "unknown library version type \`$version_type'" ++ # Use standard objects if they are pic ++ test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` ++ ++ delfiles= ++ if test -n "$export_symbols" && test -n "$include_expsyms"; then ++ $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp" ++ export_symbols="$output_objdir/$libname.uexp" ++ delfiles="$delfiles $export_symbols" ++ fi ++ ++ orig_export_symbols= ++ case $host_os in ++ cygwin* | mingw*) ++ if test -n "$export_symbols" && test -z "$export_symbols_regex"; then ++ # exporting using user supplied symfile ++ if test "x`$SED 1q $export_symbols`" != xEXPORTS; then ++ # and it's NOT already a .def file. Must figure out ++ # which of the given symbols are data symbols and tag ++ # them as such. So, trigger use of export_symbols_cmds. ++ # export_symbols gets reassigned inside the "prepare ++ # the list of exported symbols" if statement, so the ++ # include_expsyms logic still works. ++ orig_export_symbols="$export_symbols" ++ export_symbols= ++ always_export_symbols=yes ++ fi ++ fi + ;; + esac + +- # Clear the version info if we defaulted, and they specified a release. +- if test -z "$vinfo" && test -n "$release"; then +- major= +- case $version_type in +- darwin) +- # we can't check for "0.0" in archive_cmds due to quoting +- # problems, so we reset it completely +- verstring= +- ;; +- *) +- verstring="0.0" +- ;; +- esac +- if test "$need_version" = no; then +- versuffix= +- else +- versuffix=".0.0" ++ # Prepare the list of exported symbols ++ if test -z "$export_symbols"; then ++ if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then ++ func_echo "generating symbol list for \`$libname.la'" ++ export_symbols="$output_objdir/$libname.exp" ++ $opt_dry_run || $RM $export_symbols ++ cmds=$export_symbols_cmds ++ save_ifs="$IFS"; IFS='~' ++ for cmd in $cmds; do ++ IFS="$save_ifs" ++ eval cmd=\"$cmd\" ++ if len=`expr "X$cmd" : ".*"` && ++ test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then ++ func_show_eval "$cmd" 'exit $?' ++ skipped_export=false ++ else ++ # The command line is too long to execute in one step. ++ func_echo "using reloadable object file for export list..." ++ skipped_export=: ++ # Break out early, otherwise skipped_export may be ++ # set to false by a later but shorter cmd. ++ break ++ fi ++ done ++ IFS="$save_ifs" ++ if test -n "$export_symbols_regex"; then ++ func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' ++ func_show_eval '$MV "${export_symbols}T" "$export_symbols"' ++ fi + fi + fi + +- # Remove version info from name if versioning should be avoided +- if test "$avoid_version" = yes && test "$need_version" = no; then +- major= +- versuffix= +- verstring="" ++ if test -n "$export_symbols" && test -n "$include_expsyms"; then ++ tmp_export_symbols="$export_symbols" ++ test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" ++ $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"' + fi + +- # Check to see if the archive will have undefined symbols. +- if test "$allow_undefined" = yes; then +- if test "$allow_undefined_flag" = unsupported; then +- func_warning "undefined symbols not allowed in $host shared libraries" +- build_libtool_libs=no +- build_old_libs=yes +- fi +- else +- # Don't allow undefined symbols. +- allow_undefined_flag="$no_undefined_flag" ++ if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then ++ # The given exports_symbols file has to be filtered, so filter it. ++ func_echo "filter symbol list for \`$libname.la' to tag DATA exports" ++ # FIXME: $output_objdir/$libname.filter potentially contains lots of ++ # 's' commands which not all seds can handle. GNU sed should be fine ++ # though. Also, the filter scales superlinearly with the number of ++ # global variables. join(1) would be nice here, but unfortunately ++ # isn't a blessed tool. ++ $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter ++ delfiles="$delfiles $export_symbols $output_objdir/$libname.filter" ++ export_symbols=$output_objdir/$libname.def ++ $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols + fi + +- fi +- +- func_generate_dlsyms "$libname" "$libname" "yes" +- libobjs="$libobjs $symfileobj" +- test "X$libobjs" = "X " && libobjs= +- +- if test "$mode" != relink; then +- # Remove our outputs, but don't remove object files since they +- # may have been created when compiling PIC objects. +- removelist= +- tempremovelist=`$ECHO "$output_objdir/*"` +- for p in $tempremovelist; do +- case $p in +- *.$objext) +- ;; +- $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) +- if test "X$precious_files_regex" != "X"; then +- if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 +- then +- continue +- fi +- fi +- removelist="$removelist $p" +- ;; +- *) ;; ++ tmp_deplibs= ++ for test_deplib in $deplibs; do ++ case " $convenience " in ++ *" $test_deplib "*) ;; ++ *) ++ tmp_deplibs="$tmp_deplibs $test_deplib" ++ ;; + esac + done +- test -n "$removelist" && \ +- func_show_eval "${RM}r \$removelist" +- fi ++ deplibs="$tmp_deplibs" + +- # Now set the variables for building old libraries. +- if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then +- oldlibs="$oldlibs $output_objdir/$libname.$libext" ++ if test -n "$convenience"; then ++ if test -n "$whole_archive_flag_spec"; then ++ save_libobjs=$libobjs ++ eval libobjs=\"\$libobjs $whole_archive_flag_spec\" ++ else ++ gentop="$output_objdir/${outputname}x" ++ generated="$generated $gentop" + +- # Transform .lo files to .o files. +- oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` +- fi ++ func_extract_archives $gentop $convenience ++ libobjs="$libobjs $func_extract_archives_result" ++ fi ++ fi + +- # Eliminate all temporary directories. +- #for path in $notinst_path; do +- # lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e "s% $path % %g"` +- # deplibs=`$ECHO "X$deplibs " | $Xsed -e "s% -L$path % %g"` +- # dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e "s% -L$path % %g"` +- #done ++ if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then ++ eval flag=\"$thread_safe_flag_spec\" ++ linker_flags="$linker_flags $flag" ++ fi + +- if test -n "$xrpath"; then +- # If the user specified any rpath flags, then add them. +- temp_xrpath= +- for libdir in $xrpath; do +- temp_xrpath="$temp_xrpath -R$libdir" +- case "$finalize_rpath " in +- *" $libdir "*) ;; +- *) finalize_rpath="$finalize_rpath $libdir" ;; +- esac +- done +- if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then +- dependency_libs="$temp_xrpath $dependency_libs" ++ # Make a backup of the uninstalled library when relinking ++ if test "$mode" = relink; then ++ $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $? + fi +- fi + +- # Make sure dlfiles contains only unique files that won't be dlpreopened +- old_dlfiles="$dlfiles" +- dlfiles= +- for lib in $old_dlfiles; do +- case " $dlprefiles $dlfiles " in +- *" $lib "*) ;; +- *) dlfiles="$dlfiles $lib" ;; +- esac +- done ++ # Do each of the archive commands. ++ if test "$module" = yes && test -n "$module_cmds" ; then ++ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then ++ eval test_cmds=\"$module_expsym_cmds\" ++ cmds=$module_expsym_cmds ++ else ++ eval test_cmds=\"$module_cmds\" ++ cmds=$module_cmds ++ fi ++ else ++ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then ++ eval test_cmds=\"$archive_expsym_cmds\" ++ cmds=$archive_expsym_cmds ++ else ++ eval test_cmds=\"$archive_cmds\" ++ cmds=$archive_cmds ++ fi ++ fi + +- # Make sure dlprefiles contains only unique files +- old_dlprefiles="$dlprefiles" +- dlprefiles= +- for lib in $old_dlprefiles; do +- case "$dlprefiles " in +- *" $lib "*) ;; +- *) dlprefiles="$dlprefiles $lib" ;; +- esac +- done ++ if test "X$skipped_export" != "X:" && ++ len=`expr "X$test_cmds" : ".*" 2>/dev/null` && ++ test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then ++ : ++ else ++ # The command line is too long to link in one step, link piecewise ++ # or, if using GNU ld and skipped_export is not :, use a linker ++ # script. + +- if test "$build_libtool_libs" = yes; then +- if test -n "$rpath"; then +- case $host in +- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*) +- # these systems don't actually have a c library (as such)! +- ;; +- *-*-rhapsody* | *-*-darwin1.[012]) +- # Rhapsody C library is in the System framework +- deplibs="$deplibs System.ltframework" +- ;; +- *-*-netbsd*) +- # Don't link with libc until the a.out ld.so is fixed. +- ;; +- *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) +- # Do not include libc due to us having libc/libc_r. +- ;; +- *-*-sco3.2v5* | *-*-sco5v6*) +- # Causes problems with __ctype +- ;; +- *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) +- # Compiler inserts libc in the correct place for threads to work +- ;; +- *) +- # Add libc to deplibs on all other systems if necessary. +- if test "$build_libtool_need_lc" = "yes"; then +- deplibs="$deplibs -lc" +- fi +- ;; +- esac +- fi ++ # Save the value of $output and $libobjs because we want to ++ # use them later. If we have whole_archive_flag_spec, we ++ # want to use save_libobjs as it was before ++ # whole_archive_flag_spec was expanded, because we can't ++ # assume the linker understands whole_archive_flag_spec. ++ # This may have to be revisited, in case too many ++ # convenience libraries get linked in and end up exceeding ++ # the spec. ++ if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then ++ save_libobjs=$libobjs ++ fi ++ save_output=$output ++ output_la=`$ECHO "X$output" | $Xsed -e "$basename"` ++ ++ # Clear the reloadable object creation command queue and ++ # initialize k to one. ++ test_cmds= ++ concat_cmds= ++ objlist= ++ last_robj= ++ k=1 + +- # Transform deplibs into only deplibs that can be linked in shared. +- name_save=$name +- libname_save=$libname +- release_save=$release +- versuffix_save=$versuffix +- major_save=$major +- # I'm not sure if I'm treating the release correctly. I think +- # release should show up in the -l (ie -lgmp5) so we don't want to +- # add it in twice. Is that correct? +- release="" +- versuffix="" +- major="" +- newdeplibs= +- droppeddeps=no +- case $deplibs_check_method in +- pass_all) +- # Don't check for shared/static. Everything works. +- # This might be a little naive. We might want to check +- # whether the library exists or not. But this is on +- # osf3 & osf4 and I'm not really sure... Just +- # implementing what was already the behavior. +- newdeplibs=$deplibs +- ;; +- test_compile) +- # This code stresses the "libraries are programs" paradigm to its +- # limits. Maybe even breaks it. We compile a program, linking it +- # against the deplibs as a proxy for the library. Then we can check +- # whether they linked in statically or dynamically with ldd. +- $opt_dry_run || $RM conftest.c +- cat > conftest.c < $output ++ for obj in $save_libobjs ++ do ++ $ECHO \""$obj"\" >> $output ++ done ++ $ECHO ')' >> $output ++ delfiles="$delfiles $output" ++ elif test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then ++ output=${output_objdir}/${output_la}.lnk ++ func_echo "creating linker input file list: $output" ++ : > $output ++ for obj in $save_libobjs ++ do ++ $ECHO "$obj" >> $output + done ++ delfiles="$delfiles $output" ++ output=\"$file_list_spec$output\" + else +- # Error occurred in the first compile. Let's try to salvage +- # the situation: Compile a separate program for each library. +- for i in $deplibs; do +- name=`expr $i : '-l\(.*\)'` +- # If $name is empty we are operating on a -L argument. +- if test "$name" != "" && test "$name" != "0"; then +- $opt_dry_run || $RM conftest +- if $LTCC $LTCFLAGS -o conftest conftest.c $i; then +- ldd_output=`ldd conftest` +- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then +- case " $predeps $postdeps " in +- *" $i "*) +- newdeplibs="$newdeplibs $i" +- i="" +- ;; +- esac +- fi +- if test -n "$i" ; then +- libname=`eval "\\$ECHO \"$libname_spec\""` +- deplib_matches=`eval "\\$ECHO \"$library_names_spec\""` +- set dummy $deplib_matches; shift +- deplib_match=$1 +- if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then +- newdeplibs="$newdeplibs $i" +- else +- droppeddeps=yes +- $ECHO +- $ECHO "*** Warning: dynamic linker does not accept needed library $i." +- $ECHO "*** I have the capability to make that library automatically link in when" +- $ECHO "*** you link to this library. But I can only do this if you have a" +- $ECHO "*** shared version of the library, which you do not appear to have" +- $ECHO "*** because a test_compile did reveal that the linker did not use this one" +- $ECHO "*** as a dynamic dependency that programs can get resolved with at runtime." +- fi +- fi +- else +- droppeddeps=yes +- $ECHO +- $ECHO "*** Warning! Library $i is needed by this library but I was not able to" +- $ECHO "*** make it link in! You will probably need to install it or some" +- $ECHO "*** library that it depends on before this library will be fully" +- $ECHO "*** functional. Installing it before continuing would be even better." +- fi ++ func_echo "creating reloadable object files..." ++ output=$output_objdir/$output_la-${k}.$objext ++ # Loop over the list of objects to be linked. ++ for obj in $save_libobjs ++ do ++ eval test_cmds=\"$reload_cmds $objlist $last_robj\" ++ if test "X$objlist" = X || ++ { len=`expr "X$test_cmds" : ".*" 2>/dev/null` && ++ test "$len" -le "$max_cmd_len"; }; then ++ objlist="$objlist $obj" + else +- newdeplibs="$newdeplibs $i" +- fi +- done +- fi +- ;; +- file_magic*) +- set dummy $deplibs_check_method; shift +- file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` +- for a_deplib in $deplibs; do +- name=`expr $a_deplib : '-l\(.*\)'` +- # If $name is empty we are operating on a -L argument. +- if test "$name" != "" && test "$name" != "0"; then +- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then +- case " $predeps $postdeps " in +- *" $a_deplib "*) +- newdeplibs="$newdeplibs $a_deplib" +- a_deplib="" +- ;; +- esac +- fi +- if test -n "$a_deplib" ; then +- libname=`eval "\\$ECHO \"$libname_spec\""` +- for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do +- potential_libs=`ls $i/$libname[.-]* 2>/dev/null` +- for potent_lib in $potential_libs; do +- # Follow soft links. +- if ls -lLd "$potent_lib" 2>/dev/null | +- $GREP " -> " >/dev/null; then +- continue +- fi +- # The statement above tries to avoid entering an +- # endless loop below, in case of cyclic links. +- # We might still enter an endless loop, since a link +- # loop can be closed while we follow links, +- # but so what? +- potlib="$potent_lib" +- while test -h "$potlib" 2>/dev/null; do +- potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` +- case $potliblink in +- [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; +- *) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; +- esac +- done +- if eval $file_magic_cmd \"\$potlib\" 2>/dev/null | +- $SED -e 10q | +- $EGREP "$file_magic_regex" > /dev/null; then +- newdeplibs="$newdeplibs $a_deplib" +- a_deplib="" +- break 2 +- fi +- done +- done +- fi +- if test -n "$a_deplib" ; then +- droppeddeps=yes +- $ECHO +- $ECHO "*** Warning: linker path does not have real file for library $a_deplib." +- $ECHO "*** I have the capability to make that library automatically link in when" +- $ECHO "*** you link to this library. But I can only do this if you have a" +- $ECHO "*** shared version of the library, which you do not appear to have" +- $ECHO "*** because I did check the linker path looking for a file starting" +- if test -z "$potlib" ; then +- $ECHO "*** with $libname but no candidates were found. (...for file magic test)" ++ # The command $test_cmds is almost too long, add a ++ # command to the queue. ++ if test "$k" -eq 1 ; then ++ # The first file doesn't have a previous command to add. ++ eval concat_cmds=\"$reload_cmds $objlist $last_robj\" + else +- $ECHO "*** with $libname and none of the candidates passed a file format test" +- $ECHO "*** using a file magic. Last file checked: $potlib" ++ # All subsequent reloadable object files will link in ++ # the last one created. ++ eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\" + fi ++ last_robj=$output_objdir/$output_la-${k}.$objext ++ k=`expr $k + 1` ++ output=$output_objdir/$output_la-${k}.$objext ++ objlist=$obj ++ len=1 + fi +- else +- # Add a -L argument. +- newdeplibs="$newdeplibs $a_deplib" ++ done ++ # Handle the remaining objects by creating one last ++ # reloadable object file. All subsequent reloadable object ++ # files will link in the last one created. ++ test -z "$concat_cmds" || concat_cmds=$concat_cmds~ ++ eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\" ++ ++ if ${skipped_export-false}; then ++ func_echo "generating symbol list for \`$libname.la'" ++ export_symbols="$output_objdir/$libname.exp" ++ $opt_dry_run || $RM $export_symbols ++ libobjs=$output ++ # Append the command to create the export file. ++ eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\" + fi +- done # Gone through all deplibs. +- ;; +- match_pattern*) +- set dummy $deplibs_check_method; shift +- match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` +- for a_deplib in $deplibs; do +- name=`expr $a_deplib : '-l\(.*\)'` +- # If $name is empty we are operating on a -L argument. +- if test -n "$name" && test "$name" != "0"; then +- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then +- case " $predeps $postdeps " in +- *" $a_deplib "*) +- newdeplibs="$newdeplibs $a_deplib" +- a_deplib="" +- ;; +- esac +- fi +- if test -n "$a_deplib" ; then +- libname=`eval "\\$ECHO \"$libname_spec\""` +- for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do +- potential_libs=`ls $i/$libname[.-]* 2>/dev/null` +- for potent_lib in $potential_libs; do +- potlib="$potent_lib" # see symlink-check above in file_magic test +- if eval "\$ECHO \"X$potent_lib\"" 2>/dev/null | $Xsed -e 10q | \ +- $EGREP "$match_pattern_regex" > /dev/null; then +- newdeplibs="$newdeplibs $a_deplib" +- a_deplib="" +- break 2 +- fi +- done +- done +- fi +- if test -n "$a_deplib" ; then +- droppeddeps=yes +- $ECHO +- $ECHO "*** Warning: linker path does not have real file for library $a_deplib." +- $ECHO "*** I have the capability to make that library automatically link in when" +- $ECHO "*** you link to this library. But I can only do this if you have a" +- $ECHO "*** shared version of the library, which you do not appear to have" +- $ECHO "*** because I did check the linker path looking for a file starting" +- if test -z "$potlib" ; then +- $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)" +- else +- $ECHO "*** with $libname and none of the candidates passed a file format test" +- $ECHO "*** using a regex pattern. Last file checked: $potlib" ++ ++ # Set up a command to remove the reloadable object files ++ # after they are used. ++ i=0 ++ while test "$i" -lt "$k" ++ do ++ i=`expr $i + 1` ++ delfiles="$delfiles $output_objdir/$output_la-${i}.$objext" ++ done ++ ++ func_echo "creating a temporary reloadable object file: $output" ++ ++ # Loop through the commands generated above and execute them. ++ save_ifs="$IFS"; IFS='~' ++ for cmd in $concat_cmds; do ++ IFS="$save_ifs" ++ $opt_silent || { ++ func_quote_for_expand "$cmd" ++ eval "func_echo $func_quote_for_expand_result" ++ } ++ $opt_dry_run || eval "$cmd" || { ++ lt_exit=$? ++ ++ # Restore the uninstalled library and exit ++ if test "$mode" = relink; then ++ ( cd "$output_objdir" && \ ++ $RM "${realname}T" && \ ++ $MV "${realname}U" "$realname" ) + fi +- fi +- else +- # Add a -L argument. +- newdeplibs="$newdeplibs $a_deplib" +- fi +- done # Gone through all deplibs. +- ;; +- none | unknown | *) +- newdeplibs="" +- tmp_deplibs=`$ECHO "X $deplibs" | $Xsed \ +- -e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'` +- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then +- for i in $predeps $postdeps ; do +- # can't use Xsed below, because $i might contain '/' +- tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"` ++ ++ exit $lt_exit ++ } + done ++ IFS="$save_ifs" + fi +- if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' | +- $GREP . >/dev/null; then +- $ECHO +- if test "X$deplibs_check_method" = "Xnone"; then +- $ECHO "*** Warning: inter-library dependencies are not supported in this platform." ++ ++ libobjs=$output ++ # Restore the value of output. ++ output=$save_output ++ ++ if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then ++ eval libobjs=\"\$libobjs $whole_archive_flag_spec\" ++ fi ++ # Expand the library linking commands again to reset the ++ # value of $libobjs for piecewise linking. ++ ++ # Do each of the archive commands. ++ if test "$module" = yes && test -n "$module_cmds" ; then ++ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then ++ cmds=$module_expsym_cmds + else +- $ECHO "*** Warning: inter-library dependencies are not known to be supported." ++ cmds=$module_cmds ++ fi ++ else ++ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then ++ cmds=$archive_expsym_cmds ++ else ++ cmds=$archive_cmds + fi +- $ECHO "*** All declared inter-library dependencies are being dropped." +- droppeddeps=yes + fi +- ;; +- esac +- versuffix=$versuffix_save +- major=$major_save +- release=$release_save +- libname=$libname_save +- name=$name_save ++ fi + +- case $host in +- *-*-rhapsody* | *-*-darwin1.[012]) +- # On Rhapsody replace the C library with the System framework +- newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'` +- ;; +- esac ++ if test -n "$delfiles"; then ++ # Append the command to remove temporary files to $cmds. ++ eval cmds=\"\$cmds~\$RM $delfiles\" ++ fi + +- if test "$droppeddeps" = yes; then +- if test "$module" = yes; then +- $ECHO +- $ECHO "*** Warning: libtool could not satisfy all declared inter-library" +- $ECHO "*** dependencies of module $libname. Therefore, libtool will create" +- $ECHO "*** a static module, that should work as long as the dlopening" +- $ECHO "*** application is linked with the -dlopen flag." +- if test -z "$global_symbol_pipe"; then +- $ECHO +- $ECHO "*** However, this would only work if libtool was able to extract symbol" +- $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could" +- $ECHO "*** not find such a program. So, this module is probably useless." +- $ECHO "*** \`nm' from GNU binutils and a full rebuild may help." +- fi +- if test "$build_old_libs" = no; then +- oldlibs="$output_objdir/$libname.$libext" +- build_libtool_libs=module +- build_old_libs=yes +- else +- build_libtool_libs=no ++ # Add any objects from preloaded convenience libraries ++ if test -n "$dlprefiles"; then ++ gentop="$output_objdir/${outputname}x" ++ generated="$generated $gentop" ++ ++ func_extract_archives $gentop $dlprefiles ++ libobjs="$libobjs $func_extract_archives_result" ++ fi ++ ++ save_ifs="$IFS"; IFS='~' ++ for cmd in $cmds; do ++ IFS="$save_ifs" ++ eval cmd=\"$cmd\" ++ $opt_silent || { ++ func_quote_for_expand "$cmd" ++ eval "func_echo $func_quote_for_expand_result" ++ } ++ $opt_dry_run || eval "$cmd" || { ++ lt_exit=$? ++ ++ # Restore the uninstalled library and exit ++ if test "$mode" = relink; then ++ ( cd "$output_objdir" && \ ++ $RM "${realname}T" && \ ++ $MV "${realname}U" "$realname" ) + fi +- else +- $ECHO "*** The inter-library dependencies that have been dropped here will be" +- $ECHO "*** automatically added whenever a program is linked with this library" +- $ECHO "*** or is declared to -dlopen it." + +- if test "$allow_undefined" = no; then +- $ECHO +- $ECHO "*** Since this library must not contain undefined symbols," +- $ECHO "*** because either the platform does not support them or" +- $ECHO "*** it was explicitly requested with -no-undefined," +- $ECHO "*** libtool will only create a static version of it." +- if test "$build_old_libs" = no; then +- oldlibs="$output_objdir/$libname.$libext" +- build_libtool_libs=module +- build_old_libs=yes +- else +- build_libtool_libs=no +- fi ++ exit $lt_exit ++ } ++ done ++ IFS="$save_ifs" ++ ++ # Restore the uninstalled library and exit ++ if test "$mode" = relink; then ++ $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $? ++ ++ if test -n "$convenience"; then ++ if test -z "$whole_archive_flag_spec"; then ++ func_show_eval '${RM}r "$gentop"' + fi + fi ++ ++ exit $EXIT_SUCCESS + fi +- # Done checking deplibs! +- deplibs=$newdeplibs ++ ++ # Create links to the real library. ++ for linkname in $linknames; do ++ if test "$realname" != "$linkname"; then ++ func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?' ++ fi ++ done ++ ++ # If -module or -export-dynamic was specified, set the dlname. ++ if test "$module" = yes || test "$export_dynamic" = yes; then ++ # On all known operating systems, these are identical. ++ dlname="$soname" ++ fi ++ fi ++ ;; ++ ++ obj) ++ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then ++ func_warning "\`-dlopen' is ignored for objects" ++ fi ++ ++ test -n "$deplibs" && \ ++ func_warning "\`-l' and \`-L' are ignored for objects" ++ ++ test -n "$rpath" && \ ++ func_warning "\`-rpath' is ignored for objects" ++ ++ test -n "$xrpath" && \ ++ func_warning "\`-R' is ignored for objects" ++ ++ test -n "$vinfo" && \ ++ func_warning "\`-version-info' is ignored for objects" ++ ++ test -n "$release" && \ ++ func_warning "\`-release' is ignored for objects" ++ ++ case $output in ++ *.lo) ++ test -n "$objs$old_deplibs" && \ ++ func_fatal_error "cannot build library object \`$output' from non-libtool objects" ++ ++ libobj="$output" ++ obj=`$ECHO "X$output" | $Xsed -e "$lo2o"` ++ ;; ++ *) ++ libobj= ++ obj="$output" ++ ;; ++ esac ++ ++ # Delete the old objects. ++ $opt_dry_run || $RM $obj $libobj ++ ++ # Objects from convenience libraries. This assumes ++ # single-version convenience libraries. Whenever we create ++ # different ones for PIC/non-PIC, this we'll have to duplicate ++ # the extraction. ++ reload_conv_objs= ++ gentop= ++ # reload_cmds runs $LD directly, so let us get rid of ++ # -Wl from whole_archive_flag_spec ++ wl= ++ ++ if test -n "$convenience"; then ++ if test -n "$whole_archive_flag_spec"; then ++ eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\" ++ else ++ gentop="$output_objdir/${obj}x" ++ generated="$generated $gentop" ++ ++ func_extract_archives $gentop $convenience ++ reload_conv_objs="$reload_objs $func_extract_archives_result" ++ fi ++ fi ++ ++ # Create the old-style object. ++ reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test ++ ++ output="$obj" ++ func_execute_cmds "$reload_cmds" 'exit $?' ++ ++ # Exit if we aren't doing a library object file. ++ if test -z "$libobj"; then ++ if test -n "$gentop"; then ++ func_show_eval '${RM}r "$gentop"' ++ fi ++ ++ exit $EXIT_SUCCESS ++ fi ++ ++ if test "$build_libtool_libs" != yes; then ++ if test -n "$gentop"; then ++ func_show_eval '${RM}r "$gentop"' ++ fi ++ ++ # Create an invalid libtool object if no PIC, so that we don't ++ # accidentally link it into a program. ++ # $show "echo timestamp > $libobj" ++ # $opt_dry_run || eval "echo timestamp > $libobj" || exit $? ++ exit $EXIT_SUCCESS + fi +- # Time to change all our "foo.ltframework" stuff back to "-framework foo" ++ ++ if test -n "$pic_flag" || test "$pic_mode" != default; then ++ # Only do commands if we really have different PIC objects. ++ reload_objs="$libobjs $reload_conv_objs" ++ output="$libobj" ++ func_execute_cmds "$reload_cmds" 'exit $?' ++ fi ++ ++ if test -n "$gentop"; then ++ func_show_eval '${RM}r "$gentop"' ++ fi ++ ++ exit $EXIT_SUCCESS ++ ;; ++ ++ prog) + case $host in +- *-*-darwin*) +- newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` +- new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` +- deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` +- ;; ++ *cygwin*) func_stripname '' '.exe' "$output" ++ output=$func_stripname_result.exe;; ++ esac ++ test -n "$vinfo" && \ ++ func_warning "\`-version-info' is ignored for programs" ++ ++ test -n "$release" && \ ++ func_warning "\`-release' is ignored for programs" ++ ++ test "$preload" = yes \ ++ && test "$dlopen_support" = unknown \ ++ && test "$dlopen_self" = unknown \ ++ && test "$dlopen_self_static" = unknown && \ ++ func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support." ++ ++ case $host in ++ *-*-rhapsody* | *-*-darwin1.[012]) ++ # On Rhapsody replace the C library is the System framework ++ compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'` ++ finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'` ++ ;; ++ esac ++ ++ case $host in ++ *-*-darwin*) ++ # Don't allow lazy linking, it breaks C++ global constructors ++ # But is supposedly fixed on 10.4 or later (yay!). ++ if test "$tagname" = CXX ; then ++ case ${MACOSX_DEPLOYMENT_TARGET-10.0} in ++ 10.[0123]) ++ compile_command="$compile_command ${wl}-bind_at_load" ++ finalize_command="$finalize_command ${wl}-bind_at_load" ++ ;; ++ esac ++ fi ++ # Time to change all our "foo.ltframework" stuff back to "-framework foo" ++ compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` ++ finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` ++ ;; + esac + ++ + # move library search paths that coincide with paths to not yet + # installed libraries to the beginning of the library search list + new_libs= +@@ -5919,14 +5960,14 @@ EOF + case " $new_libs " in + *" -L$path/$objdir "*) ;; + *) +- case " $deplibs " in ++ case " $compile_deplibs " in + *" -L$path/$objdir "*) + new_libs="$new_libs -L$path/$objdir" ;; + esac + ;; + esac + done +- for deplib in $deplibs; do ++ for deplib in $compile_deplibs; do + case $deplib in + -L*) + case " $new_libs " in +@@ -5937,964 +5978,803 @@ EOF + *) new_libs="$new_libs $deplib" ;; + esac + done +- deplibs="$new_libs" +- +- # All the library-specific variables (install_libdir is set above). +- library_names= +- old_library= +- dlname= +- +- # Test again, we may have decided not to build it any more +- if test "$build_libtool_libs" = yes; then +- if test "$hardcode_into_libs" = yes; then +- # Hardcode the library paths +- hardcode_libdirs= +- dep_rpath= +- rpath="$finalize_rpath" +- test "$mode" != relink && rpath="$compile_rpath$rpath" +- for libdir in $rpath; do +- if test -n "$hardcode_libdir_flag_spec"; then +- if test -n "$hardcode_libdir_separator"; then +- if test -z "$hardcode_libdirs"; then +- hardcode_libdirs="$libdir" +- else +- # Just accumulate the unique libdirs. +- case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in +- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) +- ;; +- *) +- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" +- ;; +- esac +- fi +- else +- eval flag=\"$hardcode_libdir_flag_spec\" +- dep_rpath="$dep_rpath $flag" +- fi +- elif test -n "$runpath_var"; then +- case "$perm_rpath " in +- *" $libdir "*) ;; +- *) perm_rpath="$perm_rpath $libdir" ;; +- esac +- fi +- done +- # Substitute the hardcoded libdirs into the rpath. +- if test -n "$hardcode_libdir_separator" && +- test -n "$hardcode_libdirs"; then +- libdir="$hardcode_libdirs" +- if test -n "$hardcode_libdir_flag_spec_ld"; then +- eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" +- else +- eval dep_rpath=\"$hardcode_libdir_flag_spec\" +- fi +- fi +- if test -n "$runpath_var" && test -n "$perm_rpath"; then +- # We should set the runpath_var. +- rpath= +- for dir in $perm_rpath; do +- rpath="$rpath$dir:" +- done +- eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" +- fi +- test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" +- fi +- +- shlibpath="$finalize_shlibpath" +- test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath" +- if test -n "$shlibpath"; then +- eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" +- fi ++ compile_deplibs="$new_libs" + +- # Get the real and link names of the library. +- eval shared_ext=\"$shrext_cmds\" +- eval library_names=\"$library_names_spec\" +- set dummy $library_names +- shift +- realname="$1" +- shift + +- if test -n "$soname_spec"; then +- eval soname=\"$soname_spec\" +- else +- soname="$realname" +- fi +- if test -z "$dlname"; then +- dlname=$soname +- fi ++ compile_command="$compile_command $compile_deplibs" ++ finalize_command="$finalize_command $finalize_deplibs" + +- lib="$output_objdir/$realname" +- linknames= +- for link +- do +- linknames="$linknames $link" ++ if test -n "$rpath$xrpath"; then ++ # If the user specified any rpath flags, then add them. ++ for libdir in $rpath $xrpath; do ++ # This is the magic to use -rpath. ++ case "$finalize_rpath " in ++ *" $libdir "*) ;; ++ *) finalize_rpath="$finalize_rpath $libdir" ;; ++ esac + done ++ fi + +- # Use standard objects if they are pic +- test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` +- test "X$libobjs" = "X " && libobjs= +- +- delfiles= +- if test -n "$export_symbols" && test -n "$include_expsyms"; then +- $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp" +- export_symbols="$output_objdir/$libname.uexp" +- delfiles="$delfiles $export_symbols" +- fi +- +- orig_export_symbols= +- case $host_os in +- cygwin* | mingw*) +- if test -n "$export_symbols" && test -z "$export_symbols_regex"; then +- # exporting using user supplied symfile +- if test "x`$SED 1q $export_symbols`" != xEXPORTS; then +- # and it's NOT already a .def file. Must figure out +- # which of the given symbols are data symbols and tag +- # them as such. So, trigger use of export_symbols_cmds. +- # export_symbols gets reassigned inside the "prepare +- # the list of exported symbols" if statement, so the +- # include_expsyms logic still works. +- orig_export_symbols="$export_symbols" +- export_symbols= +- always_export_symbols=yes ++ # Now hardcode the library paths ++ rpath= ++ hardcode_libdirs= ++ for libdir in $compile_rpath $finalize_rpath; do ++ if test -n "$hardcode_libdir_flag_spec"; then ++ if test -n "$hardcode_libdir_separator"; then ++ if test -z "$hardcode_libdirs"; then ++ hardcode_libdirs="$libdir" ++ else ++ # Just accumulate the unique libdirs. ++ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in ++ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ++ ;; ++ *) ++ hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" ++ ;; ++ esac + fi ++ else ++ eval flag=\"$hardcode_libdir_flag_spec\" ++ rpath="$rpath $flag" + fi ++ elif test -n "$runpath_var"; then ++ case "$perm_rpath " in ++ *" $libdir "*) ;; ++ *) perm_rpath="$perm_rpath $libdir" ;; ++ esac ++ fi ++ case $host in ++ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) ++ testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'` ++ case :$dllsearchpath: in ++ *":$libdir:"*) ;; ++ *) dllsearchpath="$dllsearchpath:$libdir";; ++ esac ++ case :$dllsearchpath: in ++ *":$testbindir:"*) ;; ++ *) dllsearchpath="$dllsearchpath:$testbindir";; ++ esac + ;; +- esac +- +- # Prepare the list of exported symbols +- if test -z "$export_symbols"; then +- if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then +- func_echo "generating symbol list for \`$libname.la'" +- export_symbols="$output_objdir/$libname.exp" +- $opt_dry_run || $RM $export_symbols +- cmds=$export_symbols_cmds +- save_ifs="$IFS"; IFS='~' +- for cmd in $cmds; do +- IFS="$save_ifs" +- eval cmd=\"$cmd\" +- if len=`expr "X$cmd" : ".*"` && +- test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then +- func_show_eval "$cmd" 'exit $?' +- skipped_export=false +- else +- # The command line is too long to execute in one step. +- func_echo "using reloadable object file for export list..." +- skipped_export=: +- # Break out early, otherwise skipped_export may be +- # set to false by a later but shorter cmd. +- break +- fi +- done +- IFS="$save_ifs" +- if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then +- func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' +- func_show_eval '$MV "${export_symbols}T" "$export_symbols"' ++ esac ++ done ++ # Substitute the hardcoded libdirs into the rpath. ++ if test -n "$hardcode_libdir_separator" && ++ test -n "$hardcode_libdirs"; then ++ libdir="$hardcode_libdirs" ++ eval rpath=\" $hardcode_libdir_flag_spec\" ++ fi ++ compile_rpath="$rpath" ++ ++ rpath= ++ hardcode_libdirs= ++ for libdir in $finalize_rpath; do ++ if test -n "$hardcode_libdir_flag_spec"; then ++ if test -n "$hardcode_libdir_separator"; then ++ if test -z "$hardcode_libdirs"; then ++ hardcode_libdirs="$libdir" ++ else ++ # Just accumulate the unique libdirs. ++ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in ++ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ++ ;; ++ *) ++ hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" ++ ;; ++ esac + fi ++ else ++ eval flag=\"$hardcode_libdir_flag_spec\" ++ rpath="$rpath $flag" + fi ++ elif test -n "$runpath_var"; then ++ case "$finalize_perm_rpath " in ++ *" $libdir "*) ;; ++ *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;; ++ esac + fi ++ done ++ # Substitute the hardcoded libdirs into the rpath. ++ if test -n "$hardcode_libdir_separator" && ++ test -n "$hardcode_libdirs"; then ++ libdir="$hardcode_libdirs" ++ eval rpath=\" $hardcode_libdir_flag_spec\" ++ fi ++ finalize_rpath="$rpath" + +- if test -n "$export_symbols" && test -n "$include_expsyms"; then +- tmp_export_symbols="$export_symbols" +- test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" +- $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"' +- fi ++ if test -n "$libobjs" && test "$build_old_libs" = yes; then ++ # Transform all the library objects into standard objects. ++ compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` ++ finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` ++ fi + +- if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then +- # The given exports_symbols file has to be filtered, so filter it. +- func_echo "filter symbol list for \`$libname.la' to tag DATA exports" +- # FIXME: $output_objdir/$libname.filter potentially contains lots of +- # 's' commands which not all seds can handle. GNU sed should be fine +- # though. Also, the filter scales superlinearly with the number of +- # global variables. join(1) would be nice here, but unfortunately +- # isn't a blessed tool. +- $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter +- delfiles="$delfiles $export_symbols $output_objdir/$libname.filter" +- export_symbols=$output_objdir/$libname.def +- $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols +- fi ++ func_generate_dlsyms "$outputname" "@PROGRAM@" "no" + +- tmp_deplibs= +- for test_deplib in $deplibs; do +- case " $convenience " in +- *" $test_deplib "*) ;; +- *) +- tmp_deplibs="$tmp_deplibs $test_deplib" +- ;; +- esac +- done +- deplibs="$tmp_deplibs" ++ # template prelinking step ++ if test -n "$prelink_cmds"; then ++ func_execute_cmds "$prelink_cmds" 'exit $?' ++ fi + +- if test -n "$convenience"; then +- if test -n "$whole_archive_flag_spec" && +- test "$compiler_needs_object" = yes && +- test -z "$libobjs"; then +- # extract the archives, so we have objects to list. +- # TODO: could optimize this to just extract one archive. +- whole_archive_flag_spec= +- fi +- if test -n "$whole_archive_flag_spec"; then +- save_libobjs=$libobjs +- eval libobjs=\"\$libobjs $whole_archive_flag_spec\" +- test "X$libobjs" = "X " && libobjs= +- else +- gentop="$output_objdir/${outputname}x" +- generated="$generated $gentop" ++ wrappers_required=yes ++ case $host in ++ *cygwin* | *mingw* ) ++ if test "$build_libtool_libs" != yes; then ++ wrappers_required=no ++ fi ++ ;; ++ *) ++ if test "$need_relink" = no || test "$build_libtool_libs" != yes; then ++ wrappers_required=no ++ fi ++ ;; ++ esac ++ if test "$wrappers_required" = no; then ++ # Replace the output file specification. ++ compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` ++ link_command="$compile_command$compile_rpath" + +- func_extract_archives $gentop $convenience +- libobjs="$libobjs $func_extract_archives_result" +- test "X$libobjs" = "X " && libobjs= +- fi +- fi ++ # We have no uninstalled library dependencies, so finalize right now. ++ exit_status=0 ++ func_show_eval "$link_command" 'exit_status=$?' + +- if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then +- eval flag=\"$thread_safe_flag_spec\" +- linker_flags="$linker_flags $flag" ++ # Delete the generated files. ++ if test -f "$output_objdir/${outputname}S.${objext}"; then ++ func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"' + fi + +- # Make a backup of the uninstalled library when relinking +- if test "$mode" = relink; then +- $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $? +- fi ++ exit $exit_status ++ fi + +- # Do each of the archive commands. +- if test "$module" = yes && test -n "$module_cmds" ; then +- if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then +- eval test_cmds=\"$module_expsym_cmds\" +- cmds=$module_expsym_cmds +- else +- eval test_cmds=\"$module_cmds\" +- cmds=$module_cmds +- fi +- else +- if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then +- eval test_cmds=\"$archive_expsym_cmds\" +- cmds=$archive_expsym_cmds +- else +- eval test_cmds=\"$archive_cmds\" +- cmds=$archive_cmds +- fi +- fi ++ if test -n "$compile_shlibpath$finalize_shlibpath"; then ++ compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" ++ fi ++ if test -n "$finalize_shlibpath"; then ++ finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" ++ fi + +- if test "X$skipped_export" != "X:" && +- len=`expr "X$test_cmds" : ".*" 2>/dev/null` && +- test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then +- : +- else +- # The command line is too long to link in one step, link piecewise +- # or, if using GNU ld and skipped_export is not :, use a linker +- # script. ++ compile_var= ++ finalize_var= ++ if test -n "$runpath_var"; then ++ if test -n "$perm_rpath"; then ++ # We should set the runpath_var. ++ rpath= ++ for dir in $perm_rpath; do ++ rpath="$rpath$dir:" ++ done ++ compile_var="$runpath_var=\"$rpath\$$runpath_var\" " ++ fi ++ if test -n "$finalize_perm_rpath"; then ++ # We should set the runpath_var. ++ rpath= ++ for dir in $finalize_perm_rpath; do ++ rpath="$rpath$dir:" ++ done ++ finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " ++ fi ++ fi + +- # Save the value of $output and $libobjs because we want to +- # use them later. If we have whole_archive_flag_spec, we +- # want to use save_libobjs as it was before +- # whole_archive_flag_spec was expanded, because we can't +- # assume the linker understands whole_archive_flag_spec. +- # This may have to be revisited, in case too many +- # convenience libraries get linked in and end up exceeding +- # the spec. +- if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then +- save_libobjs=$libobjs +- fi +- save_output=$output +- output_la=`$ECHO "X$output" | $Xsed -e "$basename"` ++ if test "$no_install" = yes; then ++ # We don't need to create a wrapper script. ++ link_command="$compile_var$compile_command$compile_rpath" ++ # Replace the output file specification. ++ link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` ++ # Delete the old output file. ++ $opt_dry_run || $RM $output ++ # Link the executable and exit ++ func_show_eval "$link_command" 'exit $?' ++ exit $EXIT_SUCCESS ++ fi + +- # Clear the reloadable object creation command queue and +- # initialize k to one. +- test_cmds= +- concat_cmds= +- objlist= +- last_robj= +- k=1 ++ if test "$hardcode_action" = relink; then ++ # Fast installation is not supported ++ link_command="$compile_var$compile_command$compile_rpath" ++ relink_command="$finalize_var$finalize_command$finalize_rpath" + +- if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then +- output=${output_objdir}/${output_la}.lnkscript +- func_echo "creating GNU ld script: $output" +- $ECHO 'INPUT (' > $output +- for obj in $save_libobjs +- do +- $ECHO "$obj" >> $output +- done +- $ECHO ')' >> $output +- delfiles="$delfiles $output" +- elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then +- output=${output_objdir}/${output_la}.lnk +- func_echo "creating linker input file list: $output" +- : > $output +- set x $save_libobjs +- shift +- firstobj= +- if test "$compiler_needs_object" = yes; then +- firstobj="$1 " +- shift +- fi +- for obj +- do +- $ECHO "$obj" >> $output +- done +- delfiles="$delfiles $output" +- output=$firstobj\"$file_list_spec$output\" ++ func_warning "this platform does not like uninstalled shared libraries" ++ func_warning "\`$output' will be relinked during installation" ++ else ++ if test "$fast_install" != no; then ++ link_command="$finalize_var$compile_command$finalize_rpath" ++ if test "$fast_install" = yes; then ++ relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'` + else +- if test -n "$save_libobjs"; then +- func_echo "creating reloadable object files..." +- output=$output_objdir/$output_la-${k}.$objext +- # Loop over the list of objects to be linked. +- for obj in $save_libobjs +- do +- eval test_cmds=\"$reload_cmds $objlist $last_robj\" +- if test "X$objlist" = X || +- { len=`expr "X$test_cmds" : ".*" 2>/dev/null` && +- test "$len" -le "$max_cmd_len"; }; then +- objlist="$objlist $obj" +- else +- # The command $test_cmds is almost too long, add a +- # command to the queue. +- if test "$k" -eq 1 ; then +- # The first file doesn't have a previous command to add. +- eval concat_cmds=\"$reload_cmds $objlist $last_robj\" +- else +- # All subsequent reloadable object files will link in +- # the last one created. +- eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\" +- fi +- last_robj=$output_objdir/$output_la-${k}.$objext +- k=`expr $k + 1` +- output=$output_objdir/$output_la-${k}.$objext +- objlist=$obj +- len=1 +- fi +- done +- # Handle the remaining objects by creating one last +- # reloadable object file. All subsequent reloadable object +- # files will link in the last one created. +- test -z "$concat_cmds" || concat_cmds=$concat_cmds~ +- eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\" +- +- # Set up a command to remove the reloadable object files +- # after they are used. +- i=0 +- while test "$i" -lt "$k" +- do +- i=`expr $i + 1` +- delfiles="$delfiles $output_objdir/$output_la-${i}.$objext" +- done +- else +- output= +- fi +- +- if ${skipped_export-false}; then +- func_echo "generating symbol list for \`$libname.la'" +- export_symbols="$output_objdir/$libname.exp" +- $opt_dry_run || $RM $export_symbols +- libobjs=$output +- # Append the command to create the export file. +- test -z "$concat_cmds" || concat_cmds=$concat_cmds~ +- eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\" +- fi ++ # fast_install is set to needless ++ relink_command= ++ fi ++ else ++ link_command="$compile_var$compile_command$compile_rpath" ++ relink_command="$finalize_var$finalize_command$finalize_rpath" ++ fi ++ fi + +- test -n "$save_libobjs" && +- func_echo "creating a temporary reloadable object file: $output" ++ # Replace the output file specification. ++ link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` + +- # Loop through the commands generated above and execute them. +- save_ifs="$IFS"; IFS='~' +- for cmd in $concat_cmds; do +- IFS="$save_ifs" +- $opt_silent || { +- func_quote_for_expand "$cmd" +- eval "func_echo $func_quote_for_expand_result" +- } +- $opt_dry_run || eval "$cmd" || { +- lt_exit=$? ++ # Delete the old output files. ++ $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname + +- # Restore the uninstalled library and exit +- if test "$mode" = relink; then +- ( cd "$output_objdir" && \ +- $RM "${realname}T" && \ +- $MV "${realname}U" "$realname" ) +- fi ++ func_show_eval "$link_command" 'exit $?' + +- exit $lt_exit +- } +- done +- IFS="$save_ifs" ++ # Now create the wrapper script. ++ func_echo "creating $output" + +- if test -n "$export_symbols_regex" && ${skipped_export-false}; then +- func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' +- func_show_eval '$MV "${export_symbols}T" "$export_symbols"' +- fi ++ # Quote the relink command for shipping. ++ if test -n "$relink_command"; then ++ # Preserve any variables that may affect compiler behavior ++ for var in $variables_saved_for_relink; do ++ if eval test -z \"\${$var+set}\"; then ++ relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" ++ elif eval var_value=\$$var; test -z "$var_value"; then ++ relink_command="$var=; export $var; $relink_command" ++ else ++ func_quote_for_eval "$var_value" ++ relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" + fi ++ done ++ relink_command="(cd `pwd`; $relink_command)" ++ relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"` ++ fi + +- if ${skipped_export-false}; then +- if test -n "$export_symbols" && test -n "$include_expsyms"; then +- tmp_export_symbols="$export_symbols" +- test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" +- $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"' +- fi +- +- if test -n "$orig_export_symbols"; then +- # The given exports_symbols file has to be filtered, so filter it. +- func_echo "filter symbol list for \`$libname.la' to tag DATA exports" +- # FIXME: $output_objdir/$libname.filter potentially contains lots of +- # 's' commands which not all seds can handle. GNU sed should be fine +- # though. Also, the filter scales superlinearly with the number of +- # global variables. join(1) would be nice here, but unfortunately +- # isn't a blessed tool. +- $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter +- delfiles="$delfiles $export_symbols $output_objdir/$libname.filter" +- export_symbols=$output_objdir/$libname.def +- $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols +- fi +- fi ++ # Quote $ECHO for shipping. ++ if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then ++ case $progpath in ++ [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";; ++ *) qecho="$SHELL `pwd`/$progpath --fallback-echo";; ++ esac ++ qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"` ++ else ++ qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"` ++ fi + +- libobjs=$output +- # Restore the value of output. +- output=$save_output ++ # Only actually do things if not in dry run mode. ++ $opt_dry_run || { ++ # win32 will think the script is a binary if it has ++ # a .exe suffix, so we strip it off here. ++ case $output in ++ *.exe) func_stripname '' '.exe' "$output" ++ output=$func_stripname_result ;; ++ esac ++ # test for cygwin because mv fails w/o .exe extensions ++ case $host in ++ *cygwin*) ++ exeext=.exe ++ func_stripname '' '.exe' "$outputname" ++ outputname=$func_stripname_result ;; ++ *) exeext= ;; ++ esac ++ case $host in ++ *cygwin* | *mingw* ) ++ output_name=`basename $output` ++ output_path=`dirname $output` ++ cwrappersource="$output_path/$objdir/lt-$output_name.c" ++ cwrapper="$output_path/$output_name.exe" ++ $RM $cwrappersource $cwrapper ++ trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 + +- if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then +- eval libobjs=\"\$libobjs $whole_archive_flag_spec\" +- test "X$libobjs" = "X " && libobjs= +- fi +- # Expand the library linking commands again to reset the +- # value of $libobjs for piecewise linking. ++ cat > $cwrappersource <> $cwrappersource<<"EOF" ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include + +- save_ifs="$IFS"; IFS='~' +- for cmd in $cmds; do +- IFS="$save_ifs" +- eval cmd=\"$cmd\" +- $opt_silent || { +- func_quote_for_expand "$cmd" +- eval "func_echo $func_quote_for_expand_result" +- } +- $opt_dry_run || eval "$cmd" || { +- lt_exit=$? ++#if defined(PATH_MAX) ++# define LT_PATHMAX PATH_MAX ++#elif defined(MAXPATHLEN) ++# define LT_PATHMAX MAXPATHLEN ++#else ++# define LT_PATHMAX 1024 ++#endif + +- # Restore the uninstalled library and exit +- if test "$mode" = relink; then +- ( cd "$output_objdir" && \ +- $RM "${realname}T" && \ +- $MV "${realname}U" "$realname" ) +- fi ++#ifndef DIR_SEPARATOR ++# define DIR_SEPARATOR '/' ++# define PATH_SEPARATOR ':' ++#endif + +- exit $lt_exit +- } +- done +- IFS="$save_ifs" ++#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ ++ defined (__OS2__) ++# define HAVE_DOS_BASED_FILE_SYSTEM ++# ifndef DIR_SEPARATOR_2 ++# define DIR_SEPARATOR_2 '\\' ++# endif ++# ifndef PATH_SEPARATOR_2 ++# define PATH_SEPARATOR_2 ';' ++# endif ++#endif + +- # Restore the uninstalled library and exit +- if test "$mode" = relink; then +- $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $? ++#ifndef DIR_SEPARATOR_2 ++# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) ++#else /* DIR_SEPARATOR_2 */ ++# define IS_DIR_SEPARATOR(ch) \ ++ (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) ++#endif /* DIR_SEPARATOR_2 */ + +- if test -n "$convenience"; then +- if test -z "$whole_archive_flag_spec"; then +- func_show_eval '${RM}r "$gentop"' +- fi +- fi ++#ifndef PATH_SEPARATOR_2 ++# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) ++#else /* PATH_SEPARATOR_2 */ ++# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) ++#endif /* PATH_SEPARATOR_2 */ + +- exit $EXIT_SUCCESS +- fi ++#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) ++#define XFREE(stale) do { \ ++ if (stale) { free ((void *) stale); stale = 0; } \ ++} while (0) + +- # Create links to the real library. +- for linkname in $linknames; do +- if test "$realname" != "$linkname"; then +- func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?' +- fi +- done ++/* -DDEBUG is fairly common in CFLAGS. */ ++#undef DEBUG ++#if defined DEBUGWRAPPER ++# define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__) ++#else ++# define DEBUG(format, ...) ++#endif + +- # If -module or -export-dynamic was specified, set the dlname. +- if test "$module" = yes || test "$export_dynamic" = yes; then +- # On all known operating systems, these are identical. +- dlname="$soname" +- fi +- fi +- ;; ++const char *program_name = NULL; + +- obj) +- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then +- func_warning "\`-dlopen' is ignored for objects" +- fi ++void * xmalloc (size_t num); ++char * xstrdup (const char *string); ++const char * base_name (const char *name); ++char * find_executable(const char *wrapper); ++int check_executable(const char *path); ++char * strendzap(char *str, const char *pat); ++void lt_fatal (const char *message, ...); + +- test -n "$deplibs" && \ +- func_warning "\`-l' and \`-L' are ignored for objects" ++int ++main (int argc, char *argv[]) ++{ ++ char **newargz; ++ int i; ++ ++ program_name = (char *) xstrdup (base_name (argv[0])); ++ DEBUG("(main) argv[0] : %s\n",argv[0]); ++ DEBUG("(main) program_name : %s\n",program_name); ++ newargz = XMALLOC(char *, argc+2); ++EOF ++ ++ cat >> $cwrappersource <> $cwrappersource <<"EOF" ++ newargz[1] = find_executable(argv[0]); ++ if (newargz[1] == NULL) ++ lt_fatal("Couldn't find %s", argv[0]); ++ DEBUG("(main) found exe at : %s\n",newargz[1]); ++ /* we know the script has the same name, without the .exe */ ++ /* so make sure newargz[1] doesn't end in .exe */ ++ strendzap(newargz[1],".exe"); ++ for (i = 1; i < argc; i++) ++ newargz[i+1] = xstrdup(argv[i]); ++ newargz[argc+1] = NULL; + +- test -n "$rpath" && \ +- func_warning "\`-rpath' is ignored for objects" ++ for (i=0; i> $cwrappersource <> $cwrappersource <> $cwrappersource <<"EOF" ++ return 127; ++} + +- case $output in +- *.lo) +- test -n "$objs$old_deplibs" && \ +- func_fatal_error "cannot build library object \`$output' from non-libtool objects" ++void * ++xmalloc (size_t num) ++{ ++ void * p = (void *) malloc (num); ++ if (!p) ++ lt_fatal ("Memory exhausted"); + +- libobj=$output +- func_lo2o "$libobj" +- obj=$func_lo2o_result +- ;; +- *) +- libobj= +- obj="$output" +- ;; +- esac ++ return p; ++} + +- # Delete the old objects. +- $opt_dry_run || $RM $obj $libobj ++char * ++xstrdup (const char *string) ++{ ++ return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL ++; ++} + +- # Objects from convenience libraries. This assumes +- # single-version convenience libraries. Whenever we create +- # different ones for PIC/non-PIC, this we'll have to duplicate +- # the extraction. +- reload_conv_objs= +- gentop= +- # reload_cmds runs $LD directly, so let us get rid of +- # -Wl from whole_archive_flag_spec and hope we can get by with +- # turning comma into space.. +- wl= ++const char * ++base_name (const char *name) ++{ ++ const char *base; + +- if test -n "$convenience"; then +- if test -n "$whole_archive_flag_spec"; then +- eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" +- reload_conv_objs=$reload_objs\ `$ECHO "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'` +- else +- gentop="$output_objdir/${obj}x" +- generated="$generated $gentop" ++#if defined (HAVE_DOS_BASED_FILE_SYSTEM) ++ /* Skip over the disk name in MSDOS pathnames. */ ++ if (isalpha ((unsigned char)name[0]) && name[1] == ':') ++ name += 2; ++#endif + +- func_extract_archives $gentop $convenience +- reload_conv_objs="$reload_objs $func_extract_archives_result" +- fi +- fi ++ for (base = name; *name; name++) ++ if (IS_DIR_SEPARATOR (*name)) ++ base = name + 1; ++ return base; ++} + +- # Create the old-style object. +- reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test ++int ++check_executable(const char * path) ++{ ++ struct stat st; + +- output="$obj" +- func_execute_cmds "$reload_cmds" 'exit $?' ++ DEBUG("(check_executable) : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!"); ++ if ((!path) || (!*path)) ++ return 0; + +- # Exit if we aren't doing a library object file. +- if test -z "$libobj"; then +- if test -n "$gentop"; then +- func_show_eval '${RM}r "$gentop"' +- fi ++ if ((stat (path, &st) >= 0) && ++ ( ++ /* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */ ++#if defined (S_IXOTH) ++ ((st.st_mode & S_IXOTH) == S_IXOTH) || ++#endif ++#if defined (S_IXGRP) ++ ((st.st_mode & S_IXGRP) == S_IXGRP) || ++#endif ++ ((st.st_mode & S_IXUSR) == S_IXUSR)) ++ ) ++ return 1; ++ else ++ return 0; ++} + +- exit $EXIT_SUCCESS +- fi ++/* Searches for the full path of the wrapper. Returns ++ newly allocated full path name if found, NULL otherwise */ ++char * ++find_executable (const char* wrapper) ++{ ++ int has_slash = 0; ++ const char* p; ++ const char* p_next; ++ /* static buffer for getcwd */ ++ char tmp[LT_PATHMAX + 1]; ++ int tmp_len; ++ char* concat_name; + +- if test "$build_libtool_libs" != yes; then +- if test -n "$gentop"; then +- func_show_eval '${RM}r "$gentop"' +- fi ++ DEBUG("(find_executable) : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!"); + +- # Create an invalid libtool object if no PIC, so that we don't +- # accidentally link it into a program. +- # $show "echo timestamp > $libobj" +- # $opt_dry_run || eval "echo timestamp > $libobj" || exit $? +- exit $EXIT_SUCCESS +- fi ++ if ((wrapper == NULL) || (*wrapper == '\0')) ++ return NULL; + +- if test -n "$pic_flag" || test "$pic_mode" != default; then +- # Only do commands if we really have different PIC objects. +- reload_objs="$libobjs $reload_conv_objs" +- output="$libobj" +- func_execute_cmds "$reload_cmds" 'exit $?' +- fi ++ /* Absolute path? */ ++#if defined (HAVE_DOS_BASED_FILE_SYSTEM) ++ if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':') ++ { ++ concat_name = xstrdup (wrapper); ++ if (check_executable(concat_name)) ++ return concat_name; ++ XFREE(concat_name); ++ } ++ else ++ { ++#endif ++ if (IS_DIR_SEPARATOR (wrapper[0])) ++ { ++ concat_name = xstrdup (wrapper); ++ if (check_executable(concat_name)) ++ return concat_name; ++ XFREE(concat_name); ++ } ++#if defined (HAVE_DOS_BASED_FILE_SYSTEM) ++ } ++#endif + +- if test -n "$gentop"; then +- func_show_eval '${RM}r "$gentop"' +- fi ++ for (p = wrapper; *p; p++) ++ if (*p == '/') ++ { ++ has_slash = 1; ++ break; ++ } ++ if (!has_slash) ++ { ++ /* no slashes; search PATH */ ++ const char* path = getenv ("PATH"); ++ if (path != NULL) ++ { ++ for (p = path; *p; p = p_next) ++ { ++ const char* q; ++ size_t p_len; ++ for (q = p; *q; q++) ++ if (IS_PATH_SEPARATOR(*q)) ++ break; ++ p_len = q - p; ++ p_next = (*q == '\0' ? q : q + 1); ++ if (p_len == 0) ++ { ++ /* empty path: current directory */ ++ if (getcwd (tmp, LT_PATHMAX) == NULL) ++ lt_fatal ("getcwd failed"); ++ tmp_len = strlen(tmp); ++ concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1); ++ memcpy (concat_name, tmp, tmp_len); ++ concat_name[tmp_len] = '/'; ++ strcpy (concat_name + tmp_len + 1, wrapper); ++ } ++ else ++ { ++ concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1); ++ memcpy (concat_name, p, p_len); ++ concat_name[p_len] = '/'; ++ strcpy (concat_name + p_len + 1, wrapper); ++ } ++ if (check_executable(concat_name)) ++ return concat_name; ++ XFREE(concat_name); ++ } ++ } ++ /* not found in PATH; assume curdir */ ++ } ++ /* Relative path | not found in path: prepend cwd */ ++ if (getcwd (tmp, LT_PATHMAX) == NULL) ++ lt_fatal ("getcwd failed"); ++ tmp_len = strlen(tmp); ++ concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1); ++ memcpy (concat_name, tmp, tmp_len); ++ concat_name[tmp_len] = '/'; ++ strcpy (concat_name + tmp_len + 1, wrapper); + +- exit $EXIT_SUCCESS +- ;; ++ if (check_executable(concat_name)) ++ return concat_name; ++ XFREE(concat_name); ++ return NULL; ++} + +- prog) +- case $host in +- *cygwin*) func_stripname '' '.exe' "$output" +- output=$func_stripname_result.exe;; +- esac +- test -n "$vinfo" && \ +- func_warning "\`-version-info' is ignored for programs" ++char * ++strendzap(char *str, const char *pat) ++{ ++ size_t len, patlen; + +- test -n "$release" && \ +- func_warning "\`-release' is ignored for programs" ++ assert(str != NULL); ++ assert(pat != NULL); + +- test "$preload" = yes \ +- && test "$dlopen_support" = unknown \ +- && test "$dlopen_self" = unknown \ +- && test "$dlopen_self_static" = unknown && \ +- func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support." ++ len = strlen(str); ++ patlen = strlen(pat); + +- case $host in +- *-*-rhapsody* | *-*-darwin1.[012]) +- # On Rhapsody replace the C library is the System framework +- compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'` +- finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'` +- ;; +- esac ++ if (patlen <= len) ++ { ++ str += len - patlen; ++ if (strcmp(str, pat) == 0) ++ *str = '\0'; ++ } ++ return str; ++} + +- case $host in +- *-*-darwin*) +- # Don't allow lazy linking, it breaks C++ global constructors +- # But is supposedly fixed on 10.4 or later (yay!). +- if test "$tagname" = CXX ; then +- case ${MACOSX_DEPLOYMENT_TARGET-10.0} in +- 10.[0123]) +- compile_command="$compile_command ${wl}-bind_at_load" +- finalize_command="$finalize_command ${wl}-bind_at_load" +- ;; +- esac +- fi +- # Time to change all our "foo.ltframework" stuff back to "-framework foo" +- compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` +- finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` +- ;; +- esac ++static void ++lt_error_core (int exit_status, const char * mode, ++ const char * message, va_list ap) ++{ ++ fprintf (stderr, "%s: %s: ", program_name, mode); ++ vfprintf (stderr, message, ap); ++ fprintf (stderr, ".\n"); + ++ if (exit_status >= 0) ++ exit (exit_status); ++} + +- # move library search paths that coincide with paths to not yet +- # installed libraries to the beginning of the library search list +- new_libs= +- for path in $notinst_path; do +- case " $new_libs " in +- *" -L$path/$objdir "*) ;; +- *) +- case " $compile_deplibs " in +- *" -L$path/$objdir "*) +- new_libs="$new_libs -L$path/$objdir" ;; +- esac +- ;; +- esac +- done +- for deplib in $compile_deplibs; do +- case $deplib in +- -L*) +- case " $new_libs " in +- *" $deplib "*) ;; +- *) new_libs="$new_libs $deplib" ;; +- esac ++void ++lt_fatal (const char *message, ...) ++{ ++ va_list ap; ++ va_start (ap, message); ++ lt_error_core (EXIT_FAILURE, "FATAL", message, ap); ++ va_end (ap); ++} ++EOF ++ # we should really use a build-platform specific compiler ++ # here, but OTOH, the wrappers (shell script and this C one) ++ # are only useful if you want to execute the "real" binary. ++ # Since the "real" binary is built for $host, then this ++ # wrapper might as well be built for $host, too. ++ $opt_dry_run || $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource + ;; +- *) new_libs="$new_libs $deplib" ;; + esac +- done +- compile_deplibs="$new_libs" +- ++ $RM $output ++ trap "$RM $output; exit $EXIT_FAILURE" 1 2 15 + +- compile_command="$compile_command $compile_deplibs" +- finalize_command="$finalize_command $finalize_deplibs" ++ $ECHO > $output "\ ++#! $SHELL + +- if test -n "$rpath$xrpath"; then +- # If the user specified any rpath flags, then add them. +- for libdir in $rpath $xrpath; do +- # This is the magic to use -rpath. +- case "$finalize_rpath " in +- *" $libdir "*) ;; +- *) finalize_rpath="$finalize_rpath $libdir" ;; +- esac +- done +- fi ++# $output - temporary wrapper script for $objdir/$outputname ++# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION ++# ++# The $output program cannot be directly executed until all the libtool ++# libraries that it depends on are installed. ++# ++# This wrapper script should never be moved out of the build directory. ++# If it is, it will not operate correctly. + +- # Now hardcode the library paths +- rpath= +- hardcode_libdirs= +- for libdir in $compile_rpath $finalize_rpath; do +- if test -n "$hardcode_libdir_flag_spec"; then +- if test -n "$hardcode_libdir_separator"; then +- if test -z "$hardcode_libdirs"; then +- hardcode_libdirs="$libdir" +- else +- # Just accumulate the unique libdirs. +- case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in +- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) +- ;; +- *) +- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" +- ;; +- esac +- fi +- else +- eval flag=\"$hardcode_libdir_flag_spec\" +- rpath="$rpath $flag" +- fi +- elif test -n "$runpath_var"; then +- case "$perm_rpath " in +- *" $libdir "*) ;; +- *) perm_rpath="$perm_rpath $libdir" ;; +- esac +- fi +- case $host in +- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) +- testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'` +- case :$dllsearchpath: in +- *":$libdir:"*) ;; +- *) dllsearchpath="$dllsearchpath:$libdir";; +- esac +- case :$dllsearchpath: in +- *":$testbindir:"*) ;; +- *) dllsearchpath="$dllsearchpath:$testbindir";; +- esac +- ;; +- esac +- done +- # Substitute the hardcoded libdirs into the rpath. +- if test -n "$hardcode_libdir_separator" && +- test -n "$hardcode_libdirs"; then +- libdir="$hardcode_libdirs" +- eval rpath=\" $hardcode_libdir_flag_spec\" +- fi +- compile_rpath="$rpath" ++# Sed substitution that helps us do robust quoting. It backslashifies ++# metacharacters that are still active within double-quoted strings. ++Xsed='${SED} -e 1s/^X//' ++sed_quote_subst='$sed_quote_subst' + +- rpath= +- hardcode_libdirs= +- for libdir in $finalize_rpath; do +- if test -n "$hardcode_libdir_flag_spec"; then +- if test -n "$hardcode_libdir_separator"; then +- if test -z "$hardcode_libdirs"; then +- hardcode_libdirs="$libdir" +- else +- # Just accumulate the unique libdirs. +- case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in +- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) +- ;; +- *) +- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" +- ;; +- esac +- fi +- else +- eval flag=\"$hardcode_libdir_flag_spec\" +- rpath="$rpath $flag" +- fi +- elif test -n "$runpath_var"; then +- case "$finalize_perm_rpath " in +- *" $libdir "*) ;; +- *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;; +- esac +- fi +- done +- # Substitute the hardcoded libdirs into the rpath. +- if test -n "$hardcode_libdir_separator" && +- test -n "$hardcode_libdirs"; then +- libdir="$hardcode_libdirs" +- eval rpath=\" $hardcode_libdir_flag_spec\" +- fi +- finalize_rpath="$rpath" ++# The HP-UX ksh and POSIX shell print the target directory to stdout ++# if CDPATH is set. ++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +- if test -n "$libobjs" && test "$build_old_libs" = yes; then +- # Transform all the library objects into standard objects. +- compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` +- finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` +- fi ++relink_command=\"$relink_command\" + +- func_generate_dlsyms "$outputname" "@PROGRAM@" "no" ++# This environment variable determines our operation mode. ++if test \"\$libtool_install_magic\" = \"$magic\"; then ++ # install mode needs the following variables: ++ generated_by_libtool_version='$macro_version' ++ notinst_deplibs='$notinst_deplibs' ++else ++ # When we are sourced in execute mode, \$file and \$ECHO are already set. ++ if test \"\$libtool_execute_magic\" != \"$magic\"; then ++ ECHO=\"$qecho\" ++ file=\"\$0\" ++ # Make sure echo works. ++ if test \"X\$1\" = X--no-reexec; then ++ # Discard the --no-reexec flag, and continue. ++ shift ++ elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then ++ # Yippee, \$ECHO works! ++ : ++ else ++ # Restart under the correct shell, and then maybe \$ECHO will work. ++ exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} ++ fi ++ fi\ ++" ++ $ECHO >> $output "\ + +- # template prelinking step +- if test -n "$prelink_cmds"; then +- func_execute_cmds "$prelink_cmds" 'exit $?' +- fi ++ # Find the directory that this script lives in. ++ thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` ++ test \"x\$thisdir\" = \"x\$file\" && thisdir=. + +- wrappers_required=yes +- case $host in +- *cygwin* | *mingw* ) +- if test "$build_libtool_libs" != yes; then +- wrappers_required=no +- fi +- ;; +- *) +- if test "$need_relink" = no || test "$build_libtool_libs" != yes; then +- wrappers_required=no +- fi +- ;; ++ # Follow symbolic links until we get to the real thisdir. ++ file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\` ++ while test -n \"\$file\"; do ++ destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` ++ ++ # If there was a directory component, then change thisdir. ++ if test \"x\$destdir\" != \"x\$file\"; then ++ case \"\$destdir\" in ++ [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; ++ *) thisdir=\"\$thisdir/\$destdir\" ;; + esac +- if test "$wrappers_required" = no; then +- # Replace the output file specification. +- compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` +- link_command="$compile_command$compile_rpath" ++ fi + +- # We have no uninstalled library dependencies, so finalize right now. +- exit_status=0 +- func_show_eval "$link_command" 'exit_status=$?' ++ file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\` ++ file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\` ++ done + +- # Delete the generated files. +- if test -f "$output_objdir/${outputname}S.${objext}"; then +- func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"' +- fi ++ # Try to get the absolute directory name. ++ absdir=\`cd \"\$thisdir\" && pwd\` ++ test -n \"\$absdir\" && thisdir=\"\$absdir\" ++" + +- exit $exit_status +- fi ++ if test "$fast_install" = yes; then ++ $ECHO >> $output "\ ++ program=lt-'$outputname'$exeext ++ progdir=\"\$thisdir/$objdir\" + +- if test -n "$compile_shlibpath$finalize_shlibpath"; then +- compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" +- fi +- if test -n "$finalize_shlibpath"; then +- finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" +- fi ++ if test ! -f \"\$progdir/\$program\" || ++ { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ ++ test \"X\$file\" != \"X\$progdir/\$program\"; }; then + +- compile_var= +- finalize_var= +- if test -n "$runpath_var"; then +- if test -n "$perm_rpath"; then +- # We should set the runpath_var. +- rpath= +- for dir in $perm_rpath; do +- rpath="$rpath$dir:" +- done +- compile_var="$runpath_var=\"$rpath\$$runpath_var\" " +- fi +- if test -n "$finalize_perm_rpath"; then +- # We should set the runpath_var. +- rpath= +- for dir in $finalize_perm_rpath; do +- rpath="$rpath$dir:" +- done +- finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " +- fi +- fi ++ file=\"\$\$-\$program\" + +- if test "$no_install" = yes; then +- # We don't need to create a wrapper script. +- link_command="$compile_var$compile_command$compile_rpath" +- # Replace the output file specification. +- link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` +- # Delete the old output file. +- $opt_dry_run || $RM $output +- # Link the executable and exit +- func_show_eval "$link_command" 'exit $?' +- exit $EXIT_SUCCESS +- fi ++ if test ! -d \"\$progdir\"; then ++ $MKDIR \"\$progdir\" ++ else ++ $RM \"\$progdir/\$file\" ++ fi" + +- if test "$hardcode_action" = relink; then +- # Fast installation is not supported +- link_command="$compile_var$compile_command$compile_rpath" +- relink_command="$finalize_var$finalize_command$finalize_rpath" ++ $ECHO >> $output "\ + +- func_warning "this platform does not like uninstalled shared libraries" +- func_warning "\`$output' will be relinked during installation" ++ # relink executable if necessary ++ if test -n \"\$relink_command\"; then ++ if relink_command_output=\`eval \$relink_command 2>&1\`; then : + else +- if test "$fast_install" != no; then +- link_command="$finalize_var$compile_command$finalize_rpath" +- if test "$fast_install" = yes; then +- relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'` +- else +- # fast_install is set to needless +- relink_command= +- fi ++ $ECHO \"\$relink_command_output\" >&2 ++ $RM \"\$progdir/\$file\" ++ exit 1 ++ fi ++ fi ++ ++ $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || ++ { $RM \"\$progdir/\$program\"; ++ $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; } ++ $RM \"\$progdir/\$file\" ++ fi" + else +- link_command="$compile_var$compile_command$compile_rpath" +- relink_command="$finalize_var$finalize_command$finalize_rpath" ++ $ECHO >> $output "\ ++ program='$outputname' ++ progdir=\"\$thisdir/$objdir\" ++" + fi +- fi + +- # Replace the output file specification. +- link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` ++ $ECHO >> $output "\ + +- # Delete the old output files. +- $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname ++ if test -f \"\$progdir/\$program\"; then" + +- func_show_eval "$link_command" 'exit $?' ++ # Export our shlibpath_var if we have one. ++ if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then ++ $ECHO >> $output "\ ++ # Add our own library path to $shlibpath_var ++ $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" + +- # Now create the wrapper script. +- func_echo "creating $output" ++ # Some systems cannot cope with colon-terminated $shlibpath_var ++ # The second colon is a workaround for a bug in BeOS R4 sed ++ $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` + +- # Quote the relink command for shipping. +- if test -n "$relink_command"; then +- # Preserve any variables that may affect compiler behavior +- for var in $variables_saved_for_relink; do +- if eval test -z \"\${$var+set}\"; then +- relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" +- elif eval var_value=\$$var; test -z "$var_value"; then +- relink_command="$var=; export $var; $relink_command" +- else +- func_quote_for_eval "$var_value" +- relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" +- fi +- done +- relink_command="(cd `pwd`; $relink_command)" +- relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"` +- fi ++ export $shlibpath_var ++" ++ fi + +- # Quote $ECHO for shipping. +- if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then +- case $progpath in +- [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";; +- *) qecho="$SHELL `pwd`/$progpath --fallback-echo";; +- esac +- qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"` +- else +- qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"` +- fi ++ # fixup the dll searchpath if we need to. ++ if test -n "$dllsearchpath"; then ++ $ECHO >> $output "\ ++ # Add the dll search path components to the executable PATH ++ PATH=$dllsearchpath:\$PATH ++" ++ fi + +- # Only actually do things if not in dry run mode. +- $opt_dry_run || { +- # win32 will think the script is a binary if it has +- # a .exe suffix, so we strip it off here. +- case $output in +- *.exe) func_stripname '' '.exe' "$output" +- output=$func_stripname_result ;; +- esac +- # test for cygwin because mv fails w/o .exe extensions +- case $host in +- *cygwin*) +- exeext=.exe +- func_stripname '' '.exe' "$outputname" +- outputname=$func_stripname_result ;; +- *) exeext= ;; +- esac ++ $ECHO >> $output "\ ++ if test \"\$libtool_execute_magic\" != \"$magic\"; then ++ # Run the actual program with our arguments. ++" + case $host in +- *cygwin* | *mingw* ) +- output_name=`basename $output` +- output_path=`dirname $output` +- cwrappersource="$output_path/$objdir/lt-$output_name.c" +- cwrapper="$output_path/$output_name.exe" +- $RM $cwrappersource $cwrapper +- trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 +- +- func_emit_libtool_cwrapperexe_source > $cwrappersource ++ # Backslashes separate directories on plain windows ++ *-*-mingw | *-*-os2*) ++ $ECHO >> $output "\ ++ exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} ++" ++ ;; + +- # we should really use a build-platform specific compiler +- # here, but OTOH, the wrappers (shell script and this C one) +- # are only useful if you want to execute the "real" binary. +- # Since the "real" binary is built for $host, then this +- # wrapper might as well be built for $host, too. +- $opt_dry_run || $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource ++ *) ++ $ECHO >> $output "\ ++ exec \"\$progdir/\$program\" \${1+\"\$@\"} ++" + ;; + esac +- $RM $output +- trap "$RM $output; exit $EXIT_FAILURE" 1 2 15 +- +- func_emit_libtool_wrapper_script > $output ++ $ECHO >> $output "\ ++ \$ECHO \"\$0: cannot exec \$program \${1+\"\$@\"}\" ++ exit 1 ++ fi ++ else ++ # The program doesn't exist. ++ \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 ++ \$ECHO \"This script is just a wrapper for \$program.\" 1>&2 ++ $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 ++ exit 1 ++ fi ++fi\ ++" + chmod +x $output + } + exit $EXIT_SUCCESS +@@ -7049,7 +6929,7 @@ EOF + # Preserve any variables that may affect compiler behavior + for var in $variables_saved_for_relink; do + if eval test -z \"\${$var+set}\"; then +- relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" ++ relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" + elif eval var_value=\$$var; test -z "$var_value"; then + relink_command="$var=; export $var; $relink_command" + else +@@ -7205,9 +7085,6 @@ relink_command=\"$relink_command\"" + exit $EXIT_SUCCESS + } + +-{ test "$mode" = link || test "$mode" = relink; } && +- func_mode_link ${1+"$@"} +- + + # func_mode_uninstall arg... + func_mode_uninstall () +@@ -7275,7 +7152,7 @@ func_mode_uninstall () + *.la) + # Possibly a libtool archive, so verify it. + if func_lalib_p "$file"; then +- func_source $dir/$name ++ . $dir/$name + + # Delete the libtool libraries and symlinks. + for n in $library_names; do +@@ -7313,7 +7190,7 @@ func_mode_uninstall () + if func_lalib_p "$file"; then + + # Read the .lo file +- func_source $dir/$name ++ . $dir/$name + + # Add PIC object to the list of files to remove. + if test -n "$pic_object" && +@@ -7346,7 +7223,7 @@ func_mode_uninstall () + # Do a test to see if this is a libtool program. + if func_ltwrapper_p "$file"; then + relink_command= +- func_source $dir/$noexename ++ . $dir/$noexename + + # note $name still contains .exe if it was in $file originally + # as does the version of $file that was added into $rmfiles +@@ -7375,21 +7252,59 @@ func_mode_uninstall () + exit $exit_status + } + +-{ test "$mode" = uninstall || test "$mode" = clean; } && +- func_mode_uninstall ${1+"$@"} + +-test -z "$mode" && { +- help="$generic_help" +- func_fatal_help "you must specify a MODE" +-} ++# TEST SUITE MARKER ## NON-FUNCTION ++## ----------- ## ++## Main. ## ++## ----------- ## + +-test -z "$exec_cmd" && \ +- func_fatal_help "invalid operation mode \`$mode'" ++{ ++ # Sanity checks first: ++ func_check_version_match + +-if test -n "$exec_cmd"; then +- eval exec "$exec_cmd" +- exit $EXIT_FAILURE +-fi ++ if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then ++ func_fatal_configuration "not configured to build any kind of library" ++ fi ++ ++ test -z "$mode" && func_fatal_error "error: you must specify a MODE." ++ ++ ++ # Darwin sucks ++ eval std_shrext=\"$shrext_cmds\" ++ ++ ++ # Only execute mode is allowed to have -dlopen flags. ++ if test -n "$execute_dlfiles" && test "$mode" != execute; then ++ func_error "unrecognized option \`-dlopen'" ++ $ECHO "$help" 1>&2 ++ exit $EXIT_FAILURE ++ fi ++ ++ # Change the help message to a mode-specific one. ++ generic_help="$help" ++ help="Try \`$progname --help --mode=$mode' for more information." ++ ++ case $mode in ++ compile) func_mode_compile ${1+"$@"} ;; ++ execute) func_mode_execute ${1+"$@"} ;; ++ finish) func_mode_finish ${1+"$@"} ;; ++ install) func_mode_install ${1+"$@"} ;; ++ link|relink) func_mode_link ${1+"$@"} ;; ++ uninstall|clean) func_mode_uninstall ${1+"$@"} ;; ++ ++ "") help="$generic_help" ++ func_fatal_help "you must specify a MODE" ++ ;; ++ esac ++ ++ test -z "$exec_cmd" && \ ++ func_fatal_help "invalid operation mode \`$mode'" ++ ++ if test -n "$exec_cmd"; then ++ eval exec "$exec_cmd" ++ exit $EXIT_FAILURE ++ fi ++} + + exit $exit_status + +@@ -7418,6 +7333,3 @@ build_old_libs=`case $build_libtool_libs + # mode:shell-script + # sh-indentation:2 + # End: +-# vi:sw=2 +- +- diff --git a/package/fakeroot/fakeroot.mk b/package/fakeroot/fakeroot.mk index 40d9480262..ac5cc3a752 100644 --- a/package/fakeroot/fakeroot.mk +++ b/package/fakeroot/fakeroot.mk @@ -3,7 +3,7 @@ # fakeroot # ############################################################# -FAKEROOT_VERSION:=1.8 +FAKEROOT_VERSION:=1.8.1 FAKEROOT_SOURCE:=fakeroot_$(FAKEROOT_VERSION).tar.gz FAKEROOT_SITE:=http://ftp.debian.org/debian/pool/main/f/fakeroot FAKEROOT_CAT:=$(ZCAT)