From: Thomas Schwinge Date: Tue, 28 Feb 2012 22:40:48 +0000 (+0000) Subject: gdb/testsuite/ X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=2c8910ba4a700312af30c99d9d0f59243488e78f;p=binutils-gdb.git gdb/testsuite/ * gdb.base/annota1.exp: Use gdb_get_line_number for retrieving line numbers instead of hardcoding them. * gdb.base/annota1.c: Provide suitable markers. * gdb.base/annota3.exp: Use gdb_get_line_number for retrieving line numbers instead of hardcoding them. * gdb.base/annota3.c: Provide suitable markers. --- diff --git a/gdb/testsuite/ChangeLog b/gdb/testsuite/ChangeLog index ddb9cdc1494..5a72e3307b1 100644 --- a/gdb/testsuite/ChangeLog +++ b/gdb/testsuite/ChangeLog @@ -1,10 +1,17 @@ 2012-02-28 Thomas Schwinge - * gdb.base/annota1.c [__sh__]: Remove any special-casing. - * gdb.base/annota3.c: Likewise. - * gdb.base/sigall.c: Likewise. - * gdb.base/signals.c: Likewise. - * gdb.reverse/sigall-reverse.c: Likewise. + * gdb.base/annota1.exp: Use gdb_get_line_number for retrieving line + numbers instead of hardcoding them. + * gdb.base/annota1.c: Provide suitable markers. + * gdb.base/annota3.exp: Use gdb_get_line_number for retrieving line + numbers instead of hardcoding them. + * gdb.base/annota3.c: Provide suitable markers. + + * gdb.base/annota1.c [__sh__]: Remove any special-casing. + * gdb.base/annota3.c: Likewise. + * gdb.base/sigall.c: Likewise. + * gdb.base/signals.c: Likewise. + * gdb.reverse/sigall-reverse.c: Likewise. 2012-02-27 Maciej W. Rozycki diff --git a/gdb/testsuite/gdb.base/annota1.c b/gdb/testsuite/gdb.base/annota1.c index 28c9ed1ba70..239ea162af6 100644 --- a/gdb/testsuite/gdb.base/annota1.c +++ b/gdb/testsuite/gdb.base/annota1.c @@ -25,7 +25,7 @@ int main () #endif { - int my_array[3] = { 1, 2, 3 }; + int my_array[3] = { 1, 2, 3 }; /* break main */ value = 7; @@ -39,9 +39,9 @@ main () { int i; for (i = 0; i < 5; i++) - value++; + value++; /* increment value */ } - return 0; + return 0; /* after loop */ } diff --git a/gdb/testsuite/gdb.base/annota1.exp b/gdb/testsuite/gdb.base/annota1.exp index 66f96e7b373..ae16667562a 100644 --- a/gdb/testsuite/gdb.base/annota1.exp +++ b/gdb/testsuite/gdb.base/annota1.exp @@ -45,11 +45,6 @@ gdb_start gdb_reinitialize_dir $srcdir/$subdir gdb_load ${binfile} -# -# the line at which break main will put the breakpoint -# -set main_line 32 - # The commands we test here produce many lines of output; disable "press # to continue" prompts. gdb_test_no_output "set height 0" @@ -57,8 +52,11 @@ gdb_test_no_output "set height 0" # # break at main # + +set main_line [gdb_get_line_number "break main"] + gdb_test "break main" \ - "Breakpoint.*at.* file .*$srcfile, line.*" \ + "Breakpoint.*at.* file .*$srcfile, line $main_line\\." \ "breakpoint main" @@ -302,13 +300,13 @@ gdb_test_multiple "delete 3" "delete bp 3" { # break at main, after value is initialized. This is in preparation # to test the annotate output for the display command. # -gdb_test_multiple "break main" "break at 28" { +gdb_test_multiple "break main" "break at main" { -re "post-prompt.*\032\032breakpoints-invalid.*Breakpoint 4 at $hex: file ${escapedsrcfile}, line $main_line.*$gdb_prompt$" { - pass "break at 28" + pass "break at main" } -re "post-prompt.*\032\032breakpoints-invalid.*Breakpoint 4 at $hex: file .*${srcfile}, line $main_line.*$gdb_prompt$" { setup_xfail "*-*-*" 1270 - fail "break at 28" + fail "break at main" } } @@ -351,9 +349,12 @@ gdb_expect { # Test that breakpoints-invalid is issued once and only once for # breakpoint ignore count changes, after annotation stopped. # -gdb_test_multiple "break 46" "break at 46" { - -re "Breakpoint 5 at $hex: file .*$srcfile, line 46.*$gdb_prompt$" { - pass "break at 46" + +set value_inc_line [gdb_get_line_number "increment value"] + +gdb_test_multiple "break $value_inc_line" "break at value++" { + -re "Breakpoint 5 at $hex: file .*$srcfile, line $value_inc_line.*$gdb_prompt$" { + pass "break at value++" } } @@ -364,7 +365,7 @@ gdb_test_multiple "ignore 5 4" "ignore 5 4" { } gdb_test_multiple "continue" "annotate ignore count change" { - -re ".*$srcfile:46:.*\032\032stopped\r\n\r\n\032\032breakpoints-invalid\r\n$gdb_prompt$" { + -re ".*$srcfile:$value_inc_line:.*\032\032stopped\r\n\r\n\032\032breakpoints-invalid\r\n$gdb_prompt$" { pass "annotate ignore count change" } } @@ -377,8 +378,10 @@ gdb_test_multiple "next" "next to exit loop" { } } +set after_loop_line [gdb_get_line_number "after loop"] + gdb_test_multiple "next" "breakpoint ignore count" { - -re ".*$srcfile:49:.*$gdb_prompt$" { + -re ".*$srcfile:$after_loop_line:.*$gdb_prompt$" { pass "breakpoint ignore count" } } diff --git a/gdb/testsuite/gdb.base/annota3.c b/gdb/testsuite/gdb.base/annota3.c index 28c9ed1ba70..239ea162af6 100644 --- a/gdb/testsuite/gdb.base/annota3.c +++ b/gdb/testsuite/gdb.base/annota3.c @@ -25,7 +25,7 @@ int main () #endif { - int my_array[3] = { 1, 2, 3 }; + int my_array[3] = { 1, 2, 3 }; /* break main */ value = 7; @@ -39,9 +39,9 @@ main () { int i; for (i = 0; i < 5; i++) - value++; + value++; /* increment value */ } - return 0; + return 0; /* after loop */ } diff --git a/gdb/testsuite/gdb.base/annota3.exp b/gdb/testsuite/gdb.base/annota3.exp index 82abc0a1dde..246ff0b01f7 100644 --- a/gdb/testsuite/gdb.base/annota3.exp +++ b/gdb/testsuite/gdb.base/annota3.exp @@ -45,11 +45,6 @@ gdb_start gdb_reinitialize_dir $srcdir/$subdir gdb_load ${binfile} -# -# the line at which break main will put the breakpoint -# -set main_line 32 - # The commands we test here produce many lines of output; disable "press # to continue" prompts. gdb_test_no_output "set height 0" @@ -57,8 +52,11 @@ gdb_test_no_output "set height 0" # # break at main # + +set main_line [gdb_get_line_number "break main"] + gdb_test "break main" \ - "Breakpoint.*at.* file .*$srcfile, line.*" \ + "Breakpoint.*at.* file .*$srcfile, line $main_line\\." \ "breakpoint main" @@ -106,11 +104,10 @@ gdb_test_multiple "end" "end if construct" { # info break: # send_gdb "info break\n" -gdb_expect_list "breakpoint info" "$gdb_prompt$" { +gdb_expect_list "breakpoint info" "$gdb_prompt$" [concat { "\r\n\032\032post-prompt\r\n" - "Num Type Disp Enb Address +What\r\n" - "1 breakpoint keep y 0x\[0-9a-zA-Z\]+ +in main at .*annota3.c:32\r\n" -} + "Num Type Disp Enb Address +What\r\n" } [list \ + "1 breakpoint keep y 0x\[0-9a-zA-Z\]+ +in main at .*annota3.c:$main_line\r\n"]] # @@ -118,18 +115,18 @@ gdb_expect_list "breakpoint info" "$gdb_prompt$" { # #exp_internal 1 send_gdb "run\n" -gdb_expect_list "run until main breakpoint" "$gdb_prompt$" { +gdb_expect_list "run until main breakpoint" "$gdb_prompt$" [concat { "\r\n\032\032post-prompt\r\n" "Starting program: .*annota3(|\.exe) \r\n" "\r\n\032\032starting\r\n" "\r\n\032\032breakpoint 1\r\n" "\r\n" "Breakpoint 1, " - "\r\n\032\032frame-begin 0 0x\[0-9a-z\]+\r\n" - "main \\(\\) at .*annota3.c:32\r\n" - "\r\n\032\032source.*annota3.c:32:.*:beg:0x\[0-9a-z\]+\r\n" + "\r\n\032\032frame-begin 0 0x\[0-9a-z\]+\r\n" } [list \ + "main \\(\\) at .*annota3.c:$main_line\r\n"] [list \ + "\r\n\032\032source.*annota3.c:$main_line:.*:beg:0x\[0-9a-z\]+\r\n"] { "\r\n\032\032stopped\r\n" -} +}] #exp_internal 0 #exit 0 @@ -270,10 +267,9 @@ gdb_expect_list "delete bp 3" "$gdb_prompt$" { # to test the annotate output for the display command. # send_gdb "break main\n" -gdb_expect_list "break at 28" "$gdb_prompt$" { - "\r\n\032\032post-prompt\r\n" - "Breakpoint 4 at 0x\[0-9a-z\]+: file .*annota3.c, line 32.\r\n" -} +gdb_expect_list "break at main" "$gdb_prompt$" [concat { + "\r\n\032\032post-prompt\r\n" } [list \ + "Breakpoint 4 at 0x\[0-9a-z\]+: file .*annota3.c, line $main_line.\r\n"]] # # display the value @@ -309,11 +305,13 @@ gdb_expect { # NOTE: breakpoints-invalid annotations have been removed from # level 3 but keep these tests for continuity and comparison # with annota1.exp. -send_gdb "break 46\n" -gdb_expect_list "break at 46" "$gdb_prompt$" { - "\r\n\032\032post-prompt\r\n" - "Breakpoint 5 at 0x\[0-9a-z\]+: file .*annota3.c, line 46.\r\n" -} + +set value_inc_line [gdb_get_line_number "increment value"] + +send_gdb "break $value_inc_line\n" +gdb_expect_list "break at value++" "$gdb_prompt$" [concat { + "\r\n\032\032post-prompt\r\n" } [list \ + "Breakpoint 5 at 0x\[0-9a-z\]+: file .*annota3.c, line $value_inc_line.\r\n"]] send_gdb "ignore 5 4\n" gdb_expect_list "ignore 5 4" "$gdb_prompt$" { @@ -323,17 +321,17 @@ gdb_expect_list "ignore 5 4" "$gdb_prompt$" { } send_gdb "continue\n" -gdb_expect_list "annotate ignore count change" "$gdb_prompt$" { +gdb_expect_list "annotate ignore count change" "$gdb_prompt$" [concat { "\r\n\032\032post-prompt\r\n" "\r\n\032\032breakpoint 5\r\n" "\r\n" "Breakpoint 5, " - "\r\n\032\032frame-begin 0 0x\[0-9a-z\]+\r\n" - "main \\(\\) at .*annota3.c:46\r\n" - "\r\n\032\032source .*annota3.c:46:\[0-9\]+:beg:0x\[0-9a-z\]+\r\n" + "\r\n\032\032frame-begin 0 0x\[0-9a-z\]+\r\n" } [list \ + "main \\(\\) at .*annota3.c:$value_inc_line\r\n"] [list \ + "\r\n\032\032source .*annota3.c:$value_inc_line:\[0-9\]+:beg:0x\[0-9a-z\]+\r\n"] { "1: value = 11\r\n" "\r\n\032\032stopped\r\n" -} +}] # check that ignore command is working, or the above can provide # misleading assurance ... @@ -347,14 +345,16 @@ gdb_expect_list "next to exit loop" "$gdb_prompt$" { "\r\n\032\032stopped\r\n" } +set after_loop_line [gdb_get_line_number "after loop"] + send_gdb "next\n" -gdb_expect_list "breakpoint ignore count" "$gdb_prompt$" { +gdb_expect_list "breakpoint ignore count" "$gdb_prompt$" [concat { "\r\n\032\032post-prompt\r\n" - "\r\n\032\032starting\r\n" - "\r\n\032\032source.*annota3.c:49:\[0-9\]+:beg:0x\[0-9a-z\]+\r\n" + "\r\n\032\032starting\r\n" } [list \ + "\r\n\032\032source.*annota3.c:$after_loop_line:\[0-9\]+:beg:0x\[0-9a-z\]+\r\n"] { "1: value = 12\r\n" "\r\n\032\032stopped\r\n" -} +}] # Get the inferior's PID for later.