From: Luke Kenneth Casson Leighton <lkcl@lkcl.net>
Date: Fri, 27 Apr 2018 09:06:29 +0000 (+0100)
Subject: add microtest, minitest still too big
X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=2e5a9e67643527dbab7f182fc991f0990a39114b;p=pinmux.git

add microtest, minitest still too big
---

diff --git a/src/spec/__init__.py b/src/spec/__init__.py
index 383cab3..e03c0e3 100644
--- a/src/spec/__init__.py
+++ b/src/spec/__init__.py
@@ -1,9 +1,11 @@
 from spec import m_class
 from spec import c_class
 from spec import minitest
+from spec import microtest
 from spec.gen import specgen
 
 modules = {'m_class': m_class,
            'c_class': c_class,
-           'minitest': minitest
+           'minitest': minitest,
+           'microtest': microtest
            }
diff --git a/src/spec/microtest.py b/src/spec/microtest.py
new file mode 100644
index 0000000..fd96669
--- /dev/null
+++ b/src/spec/microtest.py
@@ -0,0 +1,74 @@
+#!/usr/bin/env python
+
+from spec.base import PinSpec
+
+from spec.ifaceprint import display, display_fns, check_functions
+from spec.ifaceprint import display_fixed
+
+
+def pinspec(of):
+    pinbanks = {
+        'A': 4,
+    }
+    fixedpins = {
+        'CTRL_SYS': [
+            'NMI#',
+            'RESET#',
+        ],
+        'POWER_GPIO': [
+            'VDD_GPIOA',
+            'GND_GPIOA',
+        ]}
+    function_names = {'EINT': 'External Interrupt',
+                      'FB': 'MC68k FlexBus',
+                      'IIS': 'I2S Audio',
+                      'JTAG0': 'JTAG (same as JTAG1, JTAG_SEL=LOW)',
+                      'JTAG1': 'JTAG (same as JTAG0, JTAG_SEL=HIGH)',
+                      'LCD': '24-pin RGB/TTL LCD',
+                      'RG': 'RGMII Ethernet',
+                      'MMC': 'eMMC 1/2/4/8 pin',
+                      'PWM': 'PWM (pulse-width modulation)',
+                      'SD0': 'SD/MMC 0',
+                      'SD1': 'SD/MMC 1',
+                      'SD2': 'SD/MMC 2',
+                      'SPI0': 'SPI (Serial Peripheral Interface) 0',
+                      'SPI1': 'SPI (Serial Peripheral Interface) 1',
+                      'QSPI': 'Quad SPI (Serial Peripheral Interface) 1',
+                      'TWI0': 'I2C 0',
+                      'TWI1': 'I2C 1',
+                      'TWI2': 'I2C 2',
+                      'UARTQ0': 'UART (TX/RX/CTS/RTS) 0',
+                      'UARTQ1': 'UART (TX/RX/CTS/RTS) 1',
+                      'UART0': 'UART (TX/RX) 0',
+                      'UART1': 'UART (TX/RX) 1',
+                      'UART2': 'UART (TX/RX) 2',
+                      'ULPI0': 'ULPI (USB Low Pin-count) 0',
+                      'ULPI1': 'ULPI (USB Low Pin-count) 1',
+                      'ULPI2': 'ULPI (USB Low Pin-count) 2',
+                      }
+
+    ps = PinSpec(pinbanks, fixedpins, function_names)
+
+    # Bank A, 0-3
+    ps.gpio("", ('A', 0), 0, 0, 4)
+    ps.uart("0", ('A', 0), 1)
+    #ps.uart("1", ('A', 2), 1)
+    ps.i2c("0", ('A', 1), 2)
+
+    minitest = ['UART0', 'TWI0', ]
+    minitest_eint = []
+    minitest_pwm = []
+    descriptions = {
+        'TWI0': 'I2C',
+        'E2:SD1': '',
+        'SPI1': '',
+        'UART0': '',
+        'B1:LCD/22': '18-bit RGB/TTL LCD',
+        'ULPI0/8': 'user-facing: internal (on Card), USB-OTG ULPI PHY',
+        'ULPI1': 'dual USB2 Host ULPI PHY'
+    }
+
+    ps.add_scenario("MiniTest", minitest, minitest_eint, minitest_pwm,
+                    descriptions)
+
+    return ps.write(of)