From: Jeff Law Date: Tue, 25 Jul 1995 07:05:21 +0000 (+0000) Subject: * gdb.base/signals.exp: xfail test where "next" acts like X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=2f11e8d4a6c7f61476aacff0bd9e7664820b2c31;p=binutils-gdb.git * gdb.base/signals.exp: xfail test where "next" acts like "continue" for lynx. --- diff --git a/gdb/testsuite/ChangeLog b/gdb/testsuite/ChangeLog index 3c2bd65432c..f1b06e64fab 100644 --- a/gdb/testsuite/ChangeLog +++ b/gdb/testsuite/ChangeLog @@ -1,4 +1,7 @@ -Mon Jul 24 23:11:55 1995 Jeff Law (law@snake.cs.utah.edu) +Tue Jul 25 01:03:52 1995 Jeff Law (law@snake.cs.utah.edu) + + * gdb.base/signals.exp: xfail test where "next" acts like + "continue" for lynx. * gdb.base/interrupt.exp: xfail test for calling function while inferior is asleep for lynx. diff --git a/gdb/testsuite/gdb.base/signals.exp b/gdb/testsuite/gdb.base/signals.exp new file mode 100644 index 00000000000..9fe42bc9e17 --- /dev/null +++ b/gdb/testsuite/gdb.base/signals.exp @@ -0,0 +1,324 @@ +if $nosignals { + verbose "Skipping signals.exp because of nosignals." + continue + } + +if $tracelevel then { + strace $tracelevel +} + +set prms_id 0 +set bug_id 0 + +set binfile $objdir/$subdir/signals + +if ![file exists $binfile] then { + perror "$binfile does not exist." + return 0 +} + +proc signal_tests_1 {} { + global prompt + if [runto_main] then { + gdb_test "next" "signal \\(SIGUSR1.*" \ + "next over signal (SIGALRM, handler)" + gdb_test "next" "alarm \\(.*" \ + "next over signal (SIGUSR1, handler)" + gdb_test "next" "\\+\\+count; /\\* first \\*/" \ + "next over alarm (1)" + # An alarm has been signaled, give the signal time to get delivered. + exec sleep 2 + + # i386 BSD currently fails the next test with a SIGTRAP. + setup_xfail "i*86-*-bsd*" + # But Dynix has a DECR_PC_AFTER_BREAK of zero, so the failure + # is shadowed by hitting the through_sigtramp_breakpoint. + clear_xfail "i*86-sequent-bsd*" + # Univel SVR4 i386 continues instead of stepping. + setup_xfail "i*86-univel-sysv4*" + # lynx fails with "next" acting like "continue" + setup_xfail "*-*-*lynx*" + send "next\n" + expect { + -re "alarm .*$prompt $" { pass "next to 2nd alarm (1)" } + -re "Program received signal SIGTRAP.*first.*$prompt $" { + + # This can happen on machines that have a trace flag + # in their PS register. + # The trace flag in the PS register will be set due to + # the `next' command. + # Before calling the signal handler, the PS register + # is pushed along with the context on the user stack. + # When the signal handler has finished, it reenters the + # the kernel via a sigreturn syscall, which restores the + # PS register along with the context. + # If the kernel erroneously does not clear the trace flag + # in the pushed context, gdb will receive a SIGTRAP from + # the set trace flag in the restored context after the + # signal handler has finished. + + # I do not yet understand why the SIGTRAP does not occur + # after stepping the instruction at the restored PC on + # i386 BSDI 1.0 systems. + + # Note that the vax under Ultrix also exhibits + # this behaviour (it is uncovered by the `continue from + # a break in a signal handler' test below). + # With this test the failure is shadowed by hitting the + # through_sigtramp_breakpoint upon return from the signal + # handler. + + fail "next to 2nd alarm (1) (probably kernel bug)" + gdb_test "next" "alarm.*" "next to 2nd alarm (1)" + } + -re "Program exited with code.*$prompt $" { + + # This is apparently a bug in the UnixWare kernel (but + # has not been investigated beyond the + # resume/target_wait level, and has not been reported + # to Univel). If it steps when a signal is pending, + # it does a continue instead. I don't know whether + # there is a workaround. + + # Perhaps this problem exists on other SVR4 systems; + # but (a) we have no reason to think so, and (b) if we + # put a wrong xfail here, we never get an XPASS to let + # us know that it was incorrect (and then if such a + # configuration regresses we have no way of knowing). + # Solaris is not a relevant data point either way + # because it lacks single stepping. + + fail "'next' behaved as 'continue'" + return 0 + } + -re ".*$prompt $" { fail "next to 2nd alarm (1)" } + timeout { fail "next to 2nd alarm (1); (timeout)" } + eof { fail "next to 2nd alarm (1); (eof)" } + } + + gdb_test "break handler" "Breakpoint \[0-9\]+ .*" + gdb_test "next" "\\+\\+count; /\\* second \\*/" \ + "next to 2nd ++count in signals_tests_1" + # An alarm has been signaled, give the signal time to get delivered. + exec sleep 2 + + set bash_bug 0 + send "next\n" + expect { + -re "Breakpoint.*handler.*$prompt $" { + pass "next to handler in signals_tests_1" + } + -re "Program received signal SIGEMT.*$prompt $" { + # Bash versions before 1.13.5 cause this behaviour + # by blocking SIGTRAP. + fail "next to handler in signals_tests_1 (known problem with bash versions before 1.13.5)" + set bash_bug 1 + gdb_test "signal 0" "Breakpoint.*handler.*" + } + -re ".*$prompt $" { fail "next to handler in signals_tests_1" } + timeout { fail "next to handler in signals_tests_1 (timeout)" } + eof { fail "next to handler in signals_tests_1 (eof)" } + } + + # This doesn't test that main is frame #2, just that main is frame + # #2, #3, or higher. At some point this should be fixed (but + # it quite possibly would introduce new FAILs on some systems). + gdb_test "backtrace" "#0.*handler.*#1.*#2.*main.*" \ + "backtrace in signals_tests_1" + + gdb_test "break func1" "Breakpoint \[0-9\]+ .*" + gdb_test "break func2" "Breakpoint \[0-9\]+ .*" + + # Vax Ultrix and i386 BSD currently fail the next test with + # a SIGTRAP, but with different symptoms. + setup_xfail "vax-*-ultrix*" + setup_xfail "i*86-*-bsd*" + send "continue\n" + expect { + -re "Breakpoint.*func1.*$prompt $" { pass "continue to func1" } + -re "Program received signal SIGTRAP.*second.*$prompt $" { + + # See explanation for `next to 2nd alarm (1)' fail above. + # We did step into the signal handler, hit a breakpoint + # in the handler and continued from the breakpoint. + # The set trace flag in the restored context is causing + # the SIGTRAP, without stepping an instruction. + + fail "continue to func1 (probably kernel bug)" + gdb_test "continue" "Breakpoint.*func1.*" \ + "extra continue to func1" + } + -re "Program received signal SIGTRAP.*func1 ..;.*$prompt $" { + + # On the vax under Ultrix the set trace flag in the restored + # context is causing the SIGTRAP, but after stepping one + # instruction, as expected. + + fail "continue to func1 (probably kernel bug)" + gdb_test "continue" "Breakpoint.*func1.*" \ + "extra continue to func1" + } + -re ".*$prompt $" { fail "continue to func1" } + default { fail "continue to func1" } + } + + setup_xfail "*-*-irix*" + send "signal SIGUSR1\n" + expect { + -re "Breakpoint.*handler.*$prompt $" { pass "signal SIGUSR1" } + -re "Program received signal SIGUSR1.*$prompt $" { + # This is what irix4 and irix5 do. + # It would appear to be a kernel bug. + fail "signal SIGUSR1" + gdb_test "continue" "Breakpoint.*handler.*" "pass it SIGUSR1" + } + -re ".*$prompt $" { fail "signal SIGUSR1" } + default { fail "signal SIGUSR1" } + } + + # Will tend to wrongly require an extra continue. + + # The problem here is that the breakpoint at func1 will be + # inserted, and when the system finishes with the signal + # handler it will try to execute there. For GDB to try to + # remember that it was going to step over a breakpoint when a + # signal happened, distinguish this case from the case where + # func1 is called from the signal handler, etc., seems + # exceedingly difficult. So don't expect this to get fixed + # anytime soon. + + setup_xfail "*-*-*" + send "continue\n" + expect { + -re "Breakpoint.*func2.*$prompt $" { pass "continue to func2" } + -re "Breakpoint.*func1.*$prompt $" { + fail "continue to func2" + gdb_test "continue" "Breakpoint.*func2.*" \ + "extra continue to func2" + } + -re ".*$prompt $" { fail "continue to func2" } + default { fail "continue to func2" } + } + + exec sleep 2 + + # GDB yanks out the breakpoints to step over the breakpoint it + # stopped at, which means the breakpoint at handler is yanked. + # But if NO_SINGLE_STEP, we won't get another chance to reinsert + # them (at least not with procfs, where we tell the kernel not + # to tell gdb about `pass' signals). So the fix would appear to + # be to just yank that one breakpoint when we step over it. + + setup_xfail "sparc-*-*" + setup_xfail "rs6000-*-*" + + # A faulty bash will not step the inferior into sigtramp on sun3. + if {$bash_bug} then { + setup_xfail "m68*-*-sunos4*" + } + + gdb_test "continue" "Breakpoint.*handler.*" "continue to handler" + + # If the NO_SINGLE_STEP failure happened, we have already exited. + # If we succeeded a continue will return from the handler to func2. + # GDB now has `forgotten' that it intended to step over the + # breakpoint at func2 and will stop at func2. + setup_xfail "*-*-*" + # The sun3 with a faulty bash will also be `forgetful' but it + # already got the spurious stop at func2 and this continue will work. + if {$bash_bug} then { + clear_xfail "m68*-*-sunos4*" + } + gdb_test "continue" "Program exited with code 010\\." \ + "continue to exit in signals_tests_1 " + } +} + +# On a few losing systems, ptrace (PT_CONTINUE) or ptrace (PT_STEP) +# causes pending signals to be cleared, which causes these tests to +# get nowhere fast. This is totally losing behavior (perhaps there +# are cases in which is it useful but the user needs more control, +# which they mostly have in GDB), but some people apparently think it +# is a feature. It is documented in the ptrace manpage on Motorola +# Delta Series sysV68 R3V7.1 and on HPUX 9.0. Even the non-HPUX PA +# OSes (BSD and OSF/1) seem to have figured they had to copy this +# braindamage. + +if {[ istarget "m68*-motorola-*" ] || [ istarget "hppa*-*-bsd*" ] || + [ istarget "*-*-hpux*" ] || [ istarget "hppa*-*-osf*" ]} then { + setup_xfail "*-*-*" + fail "ptrace loses on signals on this target" + return 0 +} + +gdb_exit +gdb_start + +# This will need to be updated as the exact list of signals changes, +# but I want to test that TARGET_SIGNAL_0, TARGET_SIGNAL_DEFAULT, and +# TARGET_SIGNAL_UNKNOWN are skipped. +gdb_test "handle all print" "Signal Stop Print Pass to program Description\r\nSIGHUP Yes Yes Yes Hangup.*SIG63 Yes Yes Yes Real-time event 63" + +gdb_exit +gdb_start +gdb_reinitialize_dir $srcdir/$subdir +gdb_load $binfile +signal_tests_1 + +# Force a resync, so we're looking at the right prompt. On SCO we +# were getting out of sync (I don't understand why). +send "p 1+1\n" +expect { + -re "= 2.*$prompt $" {} + -re ".*$prompt $" { perror "sync trouble in signals.exp" } + default { perror "sync trouble in signals.exp" } +} + +if [runto_main] then { + gdb_test "break handler if 0" "Breakpoint \[0-9\]+ .*" + gdb_test "set \$handler_breakpoint_number = \$bpnum" "" + + # Get to the point where a signal is waiting to be delivered + gdb_test "next" "signal \\(SIGUSR1.*" "next to signal in signals.exp" + gdb_test "next" "alarm \\(.*" "next to alarm #1 in signals.exp" + gdb_test "next" "\\+\\+count; /\\* first \\*/" \ + "next to ++count #1 in signals.exp" + # Give the signal time to get delivered + exec sleep 2 + + # Now call a function. When GDB tries to run the stack dummy, + # it will hit the breakpoint at handler. Provided it doesn't + # lose its cool, this is not a problem, it just has to note + # that the breakpoint condition is false and keep going. + + gdb_test "p func1 ()" "^p func1 \\(\\)\r\n.\[0-9\]* = void" \ + "p func1 () #1 in signals.exp" + + # Make sure the count got incremented. + + # Haven't investigated this xfail + setup_xfail "rs6000-*-*" + gdb_test "p count" "= 2" "p count #1 in signals.exp" + if [istarget "rs6000-*-*"] { return 0 } + + gdb_test "condition \$handler_breakpoint_number" "now unconditional\\." + gdb_test "next" "alarm \\(.*" "next to alarm #2 in signals.exp" + gdb_test "next" "\\+\\+count; /\\* second \\*/" \ + "next to ++count #2 in signals.exp" + exec sleep 2 + + # This time we stop when GDB tries to run the stack dummy. + # So it is OK that we do not print the return value from the function. + gdb_test "p func1 ()" \ +"Breakpoint \[0-9\]*, handler.* +The program being debugged stopped while in a function called from GDB.*" \ + "p func1 () #2 in signals.exp" + # But we should be able to backtrace... + gdb_test "bt" "#0.*handler.*#1.*#2.*main.*" "bt in signals.exp" + # ...and continue... + gdb_test "continue" "Continuing\\." "continue in signals.exp" + # ...and then count should have been incremented + gdb_test "p count" "= 5" "p count #2 in signals.exp" +} + +return 0