From: colepoirier@1ec9c8c87c85f09e4718cd80e0605065e33975f0 Date: Sun, 22 Nov 2020 20:24:32 +0000 (+0000) Subject: (no commit message) X-Git-Tag: convert-csv-opcode-to-binary~1681 X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=31e8fda89a6d36d42c4d1b48d82f94b986701677;p=libreriscv.git --- diff --git a/HDL_workflow/ECP5_FPGA.mdwn b/HDL_workflow/ECP5_FPGA.mdwn index efb2b8523..743b58b47 100644 --- a/HDL_workflow/ECP5_FPGA.mdwn +++ b/HDL_workflow/ECP5_FPGA.mdwn @@ -38,7 +38,7 @@ Follow this section if you have the ULX3S FPGA: | | Wire the **RED** jumper cable to (**ULX3S pin #2**) then wire it to (**STLINKv2 pin #2**), this will serve as the **Voltage Reference** signal (**VREF**) | | | Wire the **BLACK** jumper cable to (**ULX3S pin #4**) then wire it to (**STLINKv2 pin #4**), this will serve as the **Ground** signal (**GND**) | | | Wire the **GREEN** jumper cable to (**ULX3S pin #5**) then wire it to (**STLINKv2 pin #5**), this will serve as the **Test Data In** signal (**TDI**) | -| | Wire the **BLUE** jumper cable to (**ULX3S pin #6**) then wire it to (**STLINKv2 pin#7**), this will serve as the **Test Mode Select** signal (**TMS**) | +| | Wire the **BLUE** jumper cable to (**ULX3S pin #6**) then wire it to (**STLINKv2 pin #7**), this will serve as the **Test Mode Select** signal (**TMS**) | | | Wire the **WHITE** jumper cable to (**ULX3S pin #7**) then wire it to (**STLINKv2 pin #9**), this will serve as the **Test Clock** signal (**TCK**) | | | Wire the **YELLOW** jumper cable to (**ULX3S pin #8**) then wire it to (**STLINKv2 pin #13**), this will serve as the **Test Data Out** signal (**TDO**) | @@ -49,7 +49,7 @@ Follow this section if you have the Versa ECP5 FPGA: | | Wire the **RED** jumper cable to (**X3 pin #39**) then wire it to (**STLINKv2 pin #2**), this will serve as the **Voltage Reference** signal (**VREF**) | | | Wire the **BLACK** jumper cable to (**X3 pin #1**) then wire it to (**STLINKv2 pin #4**), this will serve as the **Ground** signal (**GND**) | | | Wire the **GREEN** jumper cable to (**X3 pin #4**) then wire it to (**STLINKv2 pin #5**), this will serve as the **Test Data In** signal (**TDI**) | -| | Wire the **BLUE** jumper cable to (**X3 pin #5**) then wire it to (**STLINKv2 pin#7**), this will serve as the **Test Mode Select** signal (**TMS**) | +| | Wire the **BLUE** jumper cable to (**X3 pin #5**) then wire it to (**STLINKv2 pin #7**), this will serve as the **Test Mode Select** signal (**TMS**) | | | Wire the **WHITE** jumper cable to (**X3 pin #6**) then wire it to (**STLINKv2 pin #9**), this will serve as the **Test Clock** signal (**TCK**) | | | Wire the **YELLOW** jumper cable to (**X3 pin #7**) then wire it to (**STLINKv2 pin #13**), this will serve as the **Test Data Out** signal (**TDO**) |