From: Gustavo Zacarias Date: Fri, 19 Apr 2013 09:13:07 +0000 (+0000) Subject: configs: add sample for freescale p1010rdb X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=326c21bcc26954e285eedb6f6945708132d77e19;p=buildroot.git configs: add sample for freescale p1010rdb Signed-off-by: Gustavo Zacarias Signed-off-by: Peter Korsgaard --- diff --git a/board/freescale/p1010rdb/linux-3.8.config b/board/freescale/p1010rdb/linux-3.8.config new file mode 100644 index 0000000000..5cdb4131d0 --- /dev/null +++ b/board/freescale/p1010rdb/linux-3.8.config @@ -0,0 +1,143 @@ +CONFIG_PPC_85xx=y +CONFIG_PHYS_64BIT=y +CONFIG_EXPERIMENTAL=y +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_AUDIT=y +CONFIG_IRQ_DOMAIN_DEBUG=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_BLK_DEV_INITRD=y +CONFIG_EXPERT=y +CONFIG_KALLSYMS_ALL=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +# CONFIG_BLK_DEV_BSG is not set +CONFIG_P1010_RDB=y +CONFIG_HIGHMEM=y +CONFIG_SWIOTLB=y +CONFIG_FORCE_MAX_ZONEORDER=12 +CONFIG_PCI=y +CONFIG_PCI_MSI=y +CONFIG_RAPIDIO=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_XFRM_USER=y +CONFIG_NET_KEY=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +CONFIG_NET_IPIP=y +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +CONFIG_ARPD=y +CONFIG_INET_ESP=y +# CONFIG_INET_XFRM_MODE_BEET is not set +CONFIG_INET_LRO=y +CONFIG_IPV6=y +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_MTD=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +CONFIG_FTL=y +CONFIG_MTD_CFI=y +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_PHYSMAP_OF=y +CONFIG_MTD_M25P80=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_FSL_ELBC=y +CONFIG_MTD_NAND_FSL_IFC=y +CONFIG_PROC_DEVICETREE=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_NBD=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=131072 +CONFIG_EEPROM_LEGACY=y +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=y +CONFIG_BLK_DEV_SR=y +CONFIG_CHR_DEV_SG=y +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_LOGGING=y +CONFIG_ATA=y +CONFIG_SATA_FSL=y +CONFIG_NETDEVICES=y +CONFIG_DUMMY=y +CONFIG_GIANFAR=y +CONFIG_VITESSE_PHY=y +CONFIG_FIXED_PHY=y +CONFIG_SERIO_LIBPS2=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=2 +CONFIG_SERIAL_8250_RUNTIME_UARTS=2 +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y +CONFIG_SERIAL_QE=m +CONFIG_NVRAM=y +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_CPM=m +CONFIG_I2C_MPC=y +CONFIG_SPI=y +CONFIG_SPI_FSL_SPI=y +CONFIG_SPI_FSL_ESPI=y +CONFIG_GPIO_MPC8XXX=y +# CONFIG_HWMON is not set +CONFIG_USB=y +CONFIG_USB_MON=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_FSL=y +CONFIG_USB_STORAGE=y +CONFIG_MMC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_SDHCI_OF_ESDHC=y +CONFIG_EDAC=y +CONFIG_EDAC_MM_EDAC=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_CMOS=y +CONFIG_DMADEVICES=y +CONFIG_FSL_DMA=y +# CONFIG_NET_DMA is not set +CONFIG_EXT4_FS=y +CONFIG_EXT4_USE_FOR_EXT23=y +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=y +CONFIG_PROC_KCORE=y +CONFIG_TMPFS=y +CONFIG_JFFS2_FS=y +CONFIG_SQUASHFS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +CONFIG_NFSD=y +CONFIG_CRC_T10DIF=y +CONFIG_DEBUG_FS=y +CONFIG_DETECT_HUNG_TASK=y +CONFIG_DEBUG_INFO=y +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_SHA256=y +CONFIG_CRYPTO_SHA512=y +CONFIG_CRYPTO_AES=y +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_DEV_FSL_CAAM=y diff --git a/board/freescale/p1010rdb/readme.txt b/board/freescale/p1010rdb/readme.txt new file mode 100644 index 0000000000..96293b7f39 --- /dev/null +++ b/board/freescale/p1010rdb/readme.txt @@ -0,0 +1,63 @@ + +******************** WARNING ******************** +The compiled U-Boot binary is intended for NOR flash only! +It won't work for NAND or SPI and will brick those bootloaders! + +Also don't go playing around with different U-boot versions or flash targets +unless you've got the necessary hardware and/or know-how to unbrick your kit. + +2012.10 is known good for NOR, but BAD for NAND and SPI. +******************** WARNING ******************** + +You'll need to program the files created by buildroot into the flash. +The fast way is to tftp transfer the files via one of the network interfaces. + +Alternatively you can transfer the files via serial console with an Ymodem +file transfer from your terminal program by using a "loady" command +from the u-boot prompt instead of the "tftp ..." commands stated below. +Beware that serial console file transfers are quite slow! + +Remember to set the P1010RDB switches to NOR boot if you want to use +your newly built U-Boot. + +1. Program the new U-Boot binary to NOR flash (optional) + If you don't feel confident upgrading your bootloader then don't do it, + it's unnecessary most of the time. + + => tftp $loadaddr u-boot.bin + => protect off 0xeff80000 +$filesize + => erase 0xeff80000 +$filesize + => cp.b $loadaddr 0xeff80000 $filesize + +2. Program the DTB to NOR flash + + => tftp $loadaddr p1010rdb.dtb + => erase 0xee000000 +$filesize + => cp.b $loadaddr 0xee000000 $filesize + +3. Program the kernel to NOR flash + + => tftp $loadaddr uImage + => erase 0xee080000 +$filesize + => cp.b $loadaddr 0xee080000 $filesize + +4. Program the root filesystem to NOR flash + + => tftp $loadaddr rootfs.jffs2 + => erase 0xee800000 0xeff5ffff + => cp.b $loadaddr 0xee800000 $filesize + +5. Booting your new system + + => setenv norboot 'setenv bootargs root=/dev/mtdblock2 rootfstype=jffs2 console=$consoledev,$baudrate;bootm 0xee080000 - 0xee000000' + + If you want to set this boot option as default: + + => setenv bootcmd 'run norboot' + => saveenv + + ...or for a single boot: + + => run norboot + + You can login with user "root". diff --git a/configs/freescale_p1010rdb_defconfig b/configs/freescale_p1010rdb_defconfig new file mode 100644 index 0000000000..a36f07c09b --- /dev/null +++ b/configs/freescale_p1010rdb_defconfig @@ -0,0 +1,32 @@ +# Architecture +BR2_powerpc=y +BR2_powerpc_8548=y + +# Filesystem +# BR2_TARGET_ROOTFS_TAR is not set +BR2_TARGET_ROOTFS_JFFS2=y +BR2_TARGET_ROOTFS_JFFS2_CUSTOM=y +BR2_TARGET_ROOTFS_JFFS2_CUSTOM_PAGESIZE=0x20 +BR2_TARGET_ROOTFS_JFFS2_CUSTOM_EBSIZE=0x20000 + +# Lock to 3.8 headers to avoid breaking with newer kernels +BR2_KERNEL_HEADERS_3_8=y + +# Kernel +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.8.8" +BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/freescale/p1010rdb/linux-3.8.config" +BR2_LINUX_KERNEL_UIMAGE=y +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="p1010rdb" + +# Serial port config +BR2_TARGET_GENERIC_GETTY=y +BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" + +# Bootloader +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BOARDNAME="P1010RDB_NOR" +BR2_TARGET_UBOOT_2012_10=y