From: Martin Hunt Date: Wed, 21 Aug 1996 22:53:53 +0000 (+0000) Subject: Wed Aug 21 15:50:54 1996 Martin M. Hunt X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=337350a30996abaf6e735795dd1322d52c775a70;p=binutils-gdb.git Wed Aug 21 15:50:54 1996 Martin M. Hunt * c-d10v.texi: New file. * all.texi: Added D10V stuff. * as.texinfo: Added D10V stuff. --- diff --git a/gas/doc/.Sanitize b/gas/doc/.Sanitize index 055482e963b..8770cc704cf 100644 --- a/gas/doc/.Sanitize +++ b/gas/doc/.Sanitize @@ -16,6 +16,13 @@ Do-first: +d10v_files="c-d10v.texi" +if ( echo $* | grep keep\-d10v > /dev/null ) ; then + keep_these_too="${d10v_files} ${keep_these_too}" +else + lose_these_too="${d10v_files} ${lose_these_too}" +fi + # All files listed between the "Things-to-keep:" line and the # "Files-to-sed:" line will be kept. All other files will be removed. # Directories listed in this section will have their own Sanitize @@ -83,6 +90,37 @@ else fi done fi +if [ -n "${verbose}" ] ; then + echo Processing \"arc\"... +fi + +d10v_files="all.texi as.texinfo" +if ( echo $* | grep keep\-d10v > /dev/null ) ; then + for i in $d10v_files ; do + if test ! -d $i && (grep sanitize-d10v $i > /dev/null) ; then + if [ -n "${verbose}" ] ; then + echo Keeping d10v stuff in $i + fi + fi + done +else + for i in $d10v_files ; do + if test ! -d $i && (grep sanitize-d10v $i > /dev/null) ; then + if [ -n "${verbose}" ] ; then + echo Removing traces of \"d10v\" from $i... + fi + cp $i new + sed '/start\-sanitize\-d10v/,/end-\sanitize\-d10v/d' < $i > new + if [ -n "${safe}" -a ! -f .Recover/$i ] ; then + if [ -n "${verbose}" ] ; then + echo Caching $i in .Recover... + fi + mv $i .Recover + fi + mv new $i + fi + done +fi for i in * ; do if test ! -d $i && (grep sanitize $i > /dev/null) ; then diff --git a/gas/doc/c-d10v.texi b/gas/doc/c-d10v.texi new file mode 100644 index 00000000000..5119614cd70 --- /dev/null +++ b/gas/doc/c-d10v.texi @@ -0,0 +1,198 @@ +@c Copyright (C) 1996 Free Software Foundation, Inc. +@c This is part of the GAS manual. +@c For copying conditions, see the file as.texinfo. +@ifset GENERIC +@page +@node D10V-Dependent +@chapter D10V Dependent Features +@end ifset +@ifclear GENERIC +@node Machine Dependencies +@chapter D10V Dependent Features +@end ifclear + +@cindex D10V support +@menu +* D10V-Opts:: D10V Options +* D10V-Syntax:: Syntax +* D10V-Float:: Floating Point +* D10V-opcodes:: Opcodes +@end menu + +@node D10V-Opts +@section D10V Options +@cindex options, D10V +@cindex D10V options +The Mitsubishi D10V version of @code{@value{AS}} has a few machine +dependent options. + +@table @samp +@item -O +The D10V can often execute two sub-instructions in parallel. When this option +is used, @code{@value{AS}} will attempt to optimize its output by detecting when +instructions can be executed in parallel. +@end table + +@node D10V-Syntax +@section Syntax +@cindex D10V syntax +@cindex syntax, D10V + +The D10V syntax is based on the syntax in Mitsubishi's D10V architecture manual. +The differences are detailed below. + +@menu +* D10V-Regs:: Register Names +* D10V-Size:: Size Modifiers +* D10V-Chars:: Special Characters +* D10V-Addressing:: Addressing Modes +@end menu + +@node D10V-Regs +@subsection Register Names +@cindex D10V registers +@cindex registers, D10V +You can use the predefined symbols @samp{r0} through @samp{r15} to refer to the D10V +registers. You can also use @samp{sp} as an alias for @samp{r15}. The accumulators +are @samp{a0} and @samp{a1}. Register names are not case sensitive. + +The D10V also has predefined symbols for these control registers and status bits: +@table @code +@item psw +Processor Status Word +@item bpsw +Backup Processor Status Word +@item pc +Program Counter +@item bpc +Backup Program Counter +@item rpt_c +Repeat Count +@item rpt_s +Repeat Start address +@item rpt_e +Repeat End address +@item mod_s +Modulo Start address +@item mod_e +Modulo End address +@item iba +Instruction Break Address +@item f0 +Flag 0 +@item f1 +Flag 1 +@item c +Carry flag +@end table + +@node D10V-Size +@subsection Size Modifiers +@cindex D10V size modifiers +@cindex size modifiers, D10V +The D10V version of @code{@value{AS}} uses the instruction names in the D10V +Architecture Manual. However, the names in the manual are sometimes ambiguous. +There are instruction names that can assemble to a short or long form opcode. +How does the assembler pick the correct form? @code{@value{AS}} will always pick the +smallest form if it can. When dealing with a symbol that is not defined yet when a +line is being assembled, it will always use the long form. If you need to force the +assembler to use either the short or long form of the instruction, you can append +either @samp{.s} (short) or @samp{.l} (long) to it. For example, if you are writing +an assembly program and you want to do a branch to a symbol that is defined later +in your program, you can write @samp{bra.s foo}. +Objdump and GDB will always append @samp{.s} or @samp{.l} to instructions which +have both short and long forms. + +@node D10V-Chars +@subsection Special Characters +@cindex line comment character, D10V +@cindex D10V line comment character +@samp{;} and @samp{#} are the line comment characters. +@cindex sub-instruction ordering, D10V +@cindex D10V sub-instruction ordering +Sub-instructions may be executed in order, in reverse-order, or in parallel. +Instructions listed in the standard one-per-line format will be executed sequentially. +To specify the executing order, use the following symbols: +@table @samp +@item -> +Sequential with instruction on the left first. +@item <- +Sequential with instruction on the right first. +@item || +Parallel +@end table +The D10V syntax allows either one instruction per line, one instruction per line with +the execution symbol, or two instructions per line. For example +@table @code +@item abs a1 -> abs r0 +Execute these sequentially. The instruction on the right is in the right +container and is executed second. +@item abs r0 <- abs a1 +Execute these reverse-sequentially. The instruction on the right is in the right +container, and is executed first. +@item ld2w r2,@r8+ || mac a0,r0,r7 +Execute these in parallel. +@item ld2w r2,@r8+ || +@itemx mac a0,r0,r7 +Two-line format. Execute these in parallel. +@item ld2w r2,@r8+ +@itemx mac a0,r0,r7 +Two-line format. Execute these sequentially. Assembler will +put them in the proper containers. +@item ld2w r2,@r8+ -> +@itemx mac a0,r0,r7 +Two-line format. Execute these sequentially. Same as above but +second instruction will always go into right container. +@end table +@cindex symbol names, @samp{$} in +@cindex @code{$} in symbol names +Since @samp{$} has no special meaning, you may use it in symbol names. + +@node D10V-Addressing +@subsection Addressing Modes +@cindex addressing modes, D10V +@cindex D10V addressing modes +@code{@value{AS}} understands the following addressing modes for the D10V. +@code{R@var{n}} in the following refers to any of the numbered +registers, but @emph{not} the control registers. +@table @code +@item R@var{n} +Register direct +@item @@R@var{n} +Register indirect +@item @@R@var{n}+ +Register indirect with post-increment +@item @@R@var{n}- +Register indirect with post-decrement +@item @@-SP +Register indirect with pre-decrement +@item @@(@var{disp}, R@var{n}) +Register indirect with displacement +@item @@(R0, GBR) +GBR indexed +@item @var{addr} +PC relative address (for branch or rep). +@item #@var{imm} +Immediate data +@end table + +@node D10V-Float +@section Floating Point +@cindex floating point, D10V +@cindex D10V floating point +The D10V has no hardware floating point, but the @code{.float} and @code{.double} +directives generates @sc{ieee} floating-point numbers for compatibility +with other development tools. + +@node D10V Opcodes +@section Opcodes +@cindex D10V opcode summary +@cindex opcode summary, D10V +@cindex mnemonics, D10V +@cindex instruction summary, D10V +For detailed information on the D10V machine instruction set, see +@cite{D10V Architecture: A VLIW Microprocessor for Multimedia Applications} +(Mitsubishi Electric Corp.). +@code{@value{AS}} implements all the standard D10V opcodes. The only changes are those +described in the section on size modifiers +