From: Aussedat Louis Date: Thu, 17 Oct 2019 20:39:47 +0000 (+0200) Subject: board: Add FriendlyARM Nanopi NEO Plus2 support X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=34deac05a5c61f16f5dba2416d38bb4fba44bcdb;p=buildroot.git board: Add FriendlyARM Nanopi NEO Plus2 support board with below features: - U-Boot 2019.01 - Linux 5.0 - Default packages from buildroot Signed-off-by: Aussedat Louis Signed-off-by: Arnout Vandecappelle (Essensium/Mind) --- diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml index 59efd51340..3f584dfb0b 100644 --- a/.gitlab-ci.yml +++ b/.gitlab-ci.yml @@ -185,6 +185,7 @@ freescale_t1040d4rdb_defconfig: { extends: .defconfig } freescale_t2080_qds_rdb_defconfig: { extends: .defconfig } friendlyarm_nanopi_a64_defconfig: { extends: .defconfig } friendlyarm_nanopi_neo2_defconfig: { extends: .defconfig } +friendlyarm_nanopi_neo_plus2_defconfig: { extends: .defconfig } galileo_defconfig: { extends: .defconfig } grinn_chiliboard_defconfig: { extends: .defconfig } grinn_liteboard_defconfig: { extends: .defconfig } diff --git a/DEVELOPERS b/DEVELOPERS index 9a24ca30ca..941462a077 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2512,3 +2512,7 @@ F: package/qjson/ F: package/quazip/ F: package/shapelib/ F: package/tinc/ + +N: Aussedat Louis +F: board/friendlyarm/nanopi-neo-plus2/ +F: configs/friendlyarm_nanopi_neo_plus2_defconfig diff --git a/board/friendlyarm/nanopi-neo-plus2/boot.cmd b/board/friendlyarm/nanopi-neo-plus2/boot.cmd new file mode 100644 index 0000000000..227604a23d --- /dev/null +++ b/board/friendlyarm/nanopi-neo-plus2/boot.cmd @@ -0,0 +1,6 @@ +setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait + +fatload mmc 0 $kernel_addr_r Image +fatload mmc 0 $fdt_addr_r sun50i-h5-nanopi-neo-plus2.dtb + +booti $kernel_addr_r - $fdt_addr_r diff --git a/board/friendlyarm/nanopi-neo-plus2/genimage.cfg b/board/friendlyarm/nanopi-neo-plus2/genimage.cfg new file mode 100644 index 0000000000..a4c2a7a894 --- /dev/null +++ b/board/friendlyarm/nanopi-neo-plus2/genimage.cfg @@ -0,0 +1,39 @@ +image boot.vfat { + vfat { + files = { + "Image", + "sun50i-h5-nanopi-neo-plus2.dtb", + "boot.scr" + } + } + size = 64M +} + +image sdcard.img { + hdimage { + } + + partition spl { + in-partition-table = "no" + image = "sunxi-spl.bin" + offset = 8192 + } + + partition u-boot { + in-partition-table = "no" + image = "u-boot.itb" + offset = 40K + size = 1M # 1MB - 40K + } + + partition boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + } +} diff --git a/board/friendlyarm/nanopi-neo-plus2/linux-extras.config b/board/friendlyarm/nanopi-neo-plus2/linux-extras.config new file mode 100644 index 0000000000..52b4b4b29e --- /dev/null +++ b/board/friendlyarm/nanopi-neo-plus2/linux-extras.config @@ -0,0 +1,10 @@ +# wireless core +CONFIG_WIRELESS=y +CONFIG_CFG80211=y +CONFIG_MAC80211=y +CONFIG_CFG80211_WEXT=y + +# wireless drivers +CONFIG_WLAN=y +CONFIG_WLAN_VENDOR_BROADCOM=y +CONFIG_BRCMFMAC=m diff --git a/board/friendlyarm/nanopi-neo-plus2/readme.txt b/board/friendlyarm/nanopi-neo-plus2/readme.txt new file mode 100644 index 0000000000..ae59952029 --- /dev/null +++ b/board/friendlyarm/nanopi-neo-plus2/readme.txt @@ -0,0 +1,37 @@ +Intro +===== + +This default configuration will allow you to start experimenting with the +buildroot environment for the Nanopi NEO Plus2. With the current configuration +it will bring-up the board, and allow access through the serial console. + +Nanopi NEO2 link: +http://nanopi.io/nanopi-neo-plus2.html + +Wiki link: +http://wiki.friendlyarm.com/wiki/index.php/NanoPi_NEO_Plus2 + +This configuration uses U-Boot mainline and kernel mainline. + +How to build +============ + + $ make friendlyarm_nanopi_neo_plus2_defconfig + $ make + +Note: you will need access to the internet to download the required +sources. + +How to write the SD card +======================== + +Once the build process is finished you will have an image called "sdcard.img" +in the output/images/ directory. + +Copy the bootable "sdcard.img" onto an SD card with "dd": + + $ sudo dd if=output/images/sdcard.img of=/dev/sdX + $ sudo sync + +Insert the micro SDcard in your Nanopi NEO Plus2 and power it up. The console +is on the serial line, 115200 8N1. diff --git a/board/friendlyarm/nanopi-neo-plus2/rootfs_overlay/lib/firmware/brcm/brcmfmac43430-sdio.friendlyarm,nanopi-neo-plus2.txt b/board/friendlyarm/nanopi-neo-plus2/rootfs_overlay/lib/firmware/brcm/brcmfmac43430-sdio.friendlyarm,nanopi-neo-plus2.txt new file mode 100644 index 0000000000..740d172eb5 --- /dev/null +++ b/board/friendlyarm/nanopi-neo-plus2/rootfs_overlay/lib/firmware/brcm/brcmfmac43430-sdio.friendlyarm,nanopi-neo-plus2.txt @@ -0,0 +1,53 @@ +#AP6212_NVRAM_V1.0.1_20160606 +# 2.4 GHz, 20 MHz BW mode +# The following parameter values are just placeholders, need to be updated. +manfid=0x2d0 +prodid=0x0726 +vendid=0x14e4 +devid=0x43e2 +boardtype=0x0726 +boardrev=0x1101 +boardnum=22 +macaddr=00:90:4c:c5:12:38 +sromrev=11 +boardflags=0x00404201 +xtalfreq=26000 +nocrc=1 +ag0=255 +aa2g=1 +ccode=ALL + +pa0itssit=0x20 +extpagain2g=0 + +#PA parameters for 2.4GHz, measured at CHIP OUTPUT +pa2ga0=-168,7161,-820 +AvVmid_c0=0x0,0xc8 +cckpwroffset0=5 + +# PPR params +maxp2ga0=90 +txpwrbckof=6 +cckbw202gpo=0x5555 +legofdmbw202gpo=0x77777777 +mcsbw202gpo=0xaaaaaaaa + +# OFDM IIR : +ofdmdigfilttype=7 +# PAPD mode: +papdmode=2 + +il0macaddr=00:90:4c:c5:12:38 +wl0id=0x431b + +#OOB parameters +hostwake=0x40 +hostrdy=0x41 +usbrdy=0x03 +usbrdydelay=100 +deadman_to=0xffffffff +# muxenab: 0x1 for UART enable, 0x10 for Host awake +muxenab=0x10 +# CLDO PWM voltage settings - 0x4 - 1.1 volt +#cldo_pwm=0x4 +glitch_based_crsmin=1 diff --git a/configs/friendlyarm_nanopi_neo_plus2_defconfig b/configs/friendlyarm_nanopi_neo_plus2_defconfig new file mode 100644 index 0000000000..6a5b36b7b1 --- /dev/null +++ b/configs/friendlyarm_nanopi_neo_plus2_defconfig @@ -0,0 +1,63 @@ +BR2_aarch64=y +BR2_cortex_a53=y +BR2_ARM_FPU_VFPV4=y + +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_0=y +BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y +BR2_ROOTFS_OVERLAY="board/friendlyarm/nanopi-neo-plus2/rootfs_overlay" + +# Firmware +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/apritzel/arm-trusted-firmware.git" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50iw1p1" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="aa75c8da415158a94b82a430b2b40000778e851f" +R2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y + +# Bootloader +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_VERSION=y +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.01" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nanopi_neo_plus2" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y +BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb" +BR2_TARGET_UBOOT_SPL=y +BR2_TARGET_UBOOT_SPL_NAME="spl/sunxi-spl.bin" +BR2_TARGET_UBOOT_BOOT_SCRIPT=y +BR2_TARGET_UBOOT_BOOT_SCRIPT_SOURCE="board/friendlyarm/nanopi-neo-plus2/boot.cmd" + +# Kernel +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.0" +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-h5-nanopi-neo-plus2" +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y +BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/friendlyarm/nanopi-neo-plus2/linux-extras.config" + +# Filesystem +BR2_TARGET_GENERIC_ISSUE="Welcome to FriendlyARM Nanopi NEO Plus2" +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/friendlyarm/nanopi-neo-plus2/genimage.cfg" + +# wireless firmware +BR2_PACKAGE_LINUX_FIRMWARE=y +BR2_PACKAGE_LINUX_FIRMWARE_BRCM_BCM43XXX=y + +# wireless tools +BR2_PACKAGE_IW=y +BR2_PACKAGE_WIRELESS_TOOLS=y +BR2_PACKAGE_WIRELESS_TOOLS_LIB=y +BR2_PACKAGE_WPA_SUPPLICANT=y +BR2_PACKAGE_WPA_SUPPLICANT_NL80211=y +BR2_PACKAGE_WPA_SUPPLICANT_CLI=y