From: Topi Pohjolainen Date: Wed, 19 Jul 2017 10:04:06 +0000 (+0300) Subject: i965/miptree: Take interleaving into account in stencil pitch X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=37152a559689f475edd764cc3937174e84542beb;p=mesa.git i965/miptree: Take interleaving into account in stencil pitch This makes intel_mipmap_tree::pitch and isl_surf::row_pitch semantically equivalent. Reviewed-by: Jason Ekstrand Signed-off-by: Topi Pohjolainen --- diff --git a/src/mesa/drivers/dri/i965/gen7_misc_state.c b/src/mesa/drivers/dri/i965/gen7_misc_state.c index 6c69fa8ba59..e189788a880 100644 --- a/src/mesa/drivers/dri/i965/gen7_misc_state.c +++ b/src/mesa/drivers/dri/i965/gen7_misc_state.c @@ -170,19 +170,9 @@ gen7_emit_depth_stencil_hiz(struct brw_context *brw, BEGIN_BATCH(3); OUT_BATCH(GEN7_3DSTATE_STENCIL_BUFFER << 16 | (3 - 2)); - /* The stencil buffer has quirky pitch requirements. From the - * Sandybridge PRM, Volume 2 Part 1, page 329 (3DSTATE_STENCIL_BUFFER - * dword 1 bits 16:0 - Surface Pitch): - * - * The pitch must be set to 2x the value computed based on width, as - * the stencil buffer is stored with two rows interleaved. - * - * While the Ivybridge PRM lacks this comment, the BSpec contains the - * same text, and experiments indicate that this is necessary. - */ OUT_BATCH(enabled | mocs << 25 | - (2 * stencil_mt->pitch - 1)); + (stencil_mt->pitch - 1)); OUT_RELOC(stencil_mt->bo, I915_GEM_DOMAIN_RENDER, I915_GEM_DOMAIN_RENDER, 0); diff --git a/src/mesa/drivers/dri/i965/gen8_depth_state.c b/src/mesa/drivers/dri/i965/gen8_depth_state.c index 52c6dd0787d..d05e1ba32e7 100644 --- a/src/mesa/drivers/dri/i965/gen8_depth_state.c +++ b/src/mesa/drivers/dri/i965/gen8_depth_state.c @@ -111,22 +111,8 @@ emit_depth_packets(struct brw_context *brw, } else { BEGIN_BATCH(5); OUT_BATCH(GEN7_3DSTATE_STENCIL_BUFFER << 16 | (5 - 2)); - /* The stencil buffer has quirky pitch requirements. From the Graphics - * BSpec: vol2a.11 3D Pipeline Windower > Early Depth/Stencil Processing - * > Depth/Stencil Buffer State > 3DSTATE_STENCIL_BUFFER [DevIVB+], - * field "Surface Pitch": - * - * The pitch must be set to 2x the value computed based on width, as - * the stencil buffer is stored with two rows interleaved. - * - * (Note that it is not 100% clear whether this intended to apply to - * Gen7; the BSpec flags this comment as "DevILK,DevSNB" (which would - * imply that it doesn't), however the comment appears on a "DevIVB+" - * page (which would imply that it does). Experiments with the hardware - * indicate that it does. - */ OUT_BATCH(HSW_STENCIL_ENABLED | mocs_wb << 22 | - (2 * stencil_mt->pitch - 1)); + (stencil_mt->pitch - 1)); OUT_RELOC64(stencil_mt->bo, I915_GEM_DOMAIN_RENDER, I915_GEM_DOMAIN_RENDER, 0); OUT_BATCH(stencil_mt ? stencil_mt->qpitch >> 2 : 0); diff --git a/src/mesa/drivers/dri/i965/intel_mipmap_tree.c b/src/mesa/drivers/dri/i965/intel_mipmap_tree.c index 36cb5753457..d9e09a8b011 100644 --- a/src/mesa/drivers/dri/i965/intel_mipmap_tree.c +++ b/src/mesa/drivers/dri/i965/intel_mipmap_tree.c @@ -858,6 +858,18 @@ miptree_create(struct brw_context *brw, mt->surf.tiling), &mt->pitch, alloc_flags); + + /* The stencil buffer has quirky pitch requirements. From the + * Sandybridge PRM, Volume 2 Part 1, page 329 (3DSTATE_STENCIL_BUFFER + * dword 1 bits 16:0 - Surface Pitch): + * + * The pitch must be set to 2x the value computed based on width, as + * the stencil buffer is stored with two rows interleaved. + * + * While the Ivybridge PRM lacks this comment, the BSpec contains the + * same text, and experiments indicate that this is necessary. + */ + mt->pitch *= 2; } else { mt->bo = brw_bo_alloc_tiled_2d(brw->bufmgr, "miptree", mt->total_width, mt->total_height, @@ -2819,7 +2831,7 @@ intel_offset_S8(uint32_t stride, uint32_t x, uint32_t y, bool swizzled) uint32_t tile_size = 4096; uint32_t tile_width = 64; uint32_t tile_height = 64; - uint32_t row_size = 64 * stride; + uint32_t row_size = 64 * stride / 2; /* Two rows are interleaved. */ uint32_t tile_x = x / tile_width; uint32_t tile_y = y / tile_height; @@ -3197,12 +3209,8 @@ intel_miptree_map_s8(struct brw_context *brw, * temporary buffer back out. */ if (!(map->mode & GL_MAP_INVALIDATE_RANGE_BIT)) { - /* ISL uses a stencil pitch value that is expected by hardware whereas - * traditional miptree uses half of that. Below the value gets supplied - * to intel_offset_S8() which expects the legacy interpretation. - */ const unsigned pitch = mt->surf.size > 0 ? - mt->surf.row_pitch / 2 : mt->pitch; + mt->surf.row_pitch : mt->pitch; uint8_t *untiled_s8_map = map->ptr; uint8_t *tiled_s8_map = intel_miptree_map_raw(brw, mt, GL_MAP_READ_BIT); unsigned int image_x, image_y; @@ -3239,12 +3247,8 @@ intel_miptree_unmap_s8(struct brw_context *brw, unsigned int slice) { if (map->mode & GL_MAP_WRITE_BIT) { - /* ISL uses a stencil pitch value that is expected by hardware whereas - * traditional miptree uses half of that. Below the value gets supplied - * to intel_offset_S8() which expects the legacy interpretation. - */ const unsigned pitch = mt->surf.size > 0 ? - mt->surf.row_pitch / 2: mt->pitch; + mt->surf.row_pitch : mt->pitch; unsigned int image_x, image_y; uint8_t *untiled_s8_map = map->ptr; uint8_t *tiled_s8_map = intel_miptree_map_raw(brw, mt, GL_MAP_WRITE_BIT); @@ -3352,12 +3356,8 @@ intel_miptree_map_depthstencil(struct brw_context *brw, * temporary buffer back out. */ if (!(map->mode & GL_MAP_INVALIDATE_RANGE_BIT)) { - /* ISL uses a stencil pitch value that is expected by hardware whereas - * traditional miptree uses half of that. Below the value gets supplied - * to intel_offset_S8() which expects the legacy interpretation. - */ const unsigned s_pitch = s_mt->surf.size > 0 ? - s_mt->surf.row_pitch / 2 : s_mt->pitch; + s_mt->surf.row_pitch : s_mt->pitch; uint32_t *packed_map = map->ptr; uint8_t *s_map = intel_miptree_map_raw(brw, s_mt, GL_MAP_READ_BIT); uint32_t *z_map = intel_miptree_map_raw(brw, z_mt, GL_MAP_READ_BIT); @@ -3419,12 +3419,8 @@ intel_miptree_unmap_depthstencil(struct brw_context *brw, bool map_z32f_x24s8 = mt->format == MESA_FORMAT_Z_FLOAT32; if (map->mode & GL_MAP_WRITE_BIT) { - /* ISL uses a stencil pitch value that is expected by hardware whereas - * traditional miptree uses half of that. Below the value gets supplied - * to intel_offset_S8() which expects the legacy interpretation. - */ const unsigned s_pitch = s_mt->surf.size > 0 ? - s_mt->surf.row_pitch / 2 : s_mt->pitch; + s_mt->surf.row_pitch : s_mt->pitch; uint32_t *packed_map = map->ptr; uint8_t *s_map = intel_miptree_map_raw(brw, s_mt, GL_MAP_WRITE_BIT); uint32_t *z_map = intel_miptree_map_raw(brw, z_mt, GL_MAP_WRITE_BIT); @@ -3738,17 +3734,7 @@ intel_miptree_get_isl_surf(struct brw_context *brw, mt->array_layout); surf->msaa_layout = mt->surf.msaa_layout; surf->tiling = intel_miptree_get_isl_tiling(mt); - - if (mt->format == MESA_FORMAT_S_UINT8) { - /* The ISL definition of row_pitch matches the surface state pitch field - * a bit better than intel_mipmap_tree. In particular, ISL incorporates - * the factor of 2 for W-tiling in row_pitch. - */ - surf->row_pitch = 2 * mt->pitch; - } else { - surf->row_pitch = mt->pitch; - } - + surf->row_pitch = mt->pitch; surf->format = translate_tex_format(brw, mt->format, false); if (brw->gen >= 9) {