From: Mark Kettenis Date: Sun, 1 Aug 2004 21:55:44 +0000 (+0000) Subject: * i386-tdep.c (I386_MAX_INSN_LEN): New define. X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=37bdc87e5aefe70fabf763ff182c36d83993c957;p=binutils-gdb.git * i386-tdep.c (I386_MAX_INSN_LEN): New define. (struct i386_insn): New structure. (i386_match_insn): New function. (i386_frame_setup_skip_insns): New variable. (i386_analyze_frame_setup): Change to use i386_match_insn and the array i386_frame_setup_insns of instructions that should be skipped inside the frame setup sequence. --- diff --git a/gdb/ChangeLog b/gdb/ChangeLog index c50eab9468f..c375e24d1c3 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,3 +1,13 @@ +2004-08-01 Mark Kettenis + + * i386-tdep.c (I386_MAX_INSN_LEN): New define. + (struct i386_insn): New structure. + (i386_match_insn): New function. + (i386_frame_setup_skip_insns): New variable. + (i386_analyze_frame_setup): Change to use i386_match_insn and the + array i386_frame_setup_insns of instructions that should be + skipped inside the frame setup sequence. + 2004-08-01 Andrew Cagney * frame.h (deprecated_frame_xmalloc_with_cleanup) diff --git a/gdb/i386-tdep.c b/gdb/i386-tdep.c index 2744b40b72e..cc727c81d98 100644 --- a/gdb/i386-tdep.c +++ b/gdb/i386-tdep.c @@ -472,21 +472,123 @@ i386_skip_probe (CORE_ADDR pc) return pc; } +/* Maximum instruction length we need to handle. */ +#define I386_MAX_INSN_LEN 6 + +/* Instruction description. */ +struct i386_insn +{ + size_t len; + unsigned char insn[I386_MAX_INSN_LEN]; + unsigned char mask[I386_MAX_INSN_LEN]; +}; + +/* Search for the instruction at PC in the list SKIP_INSNS. Return + the first instruction description that matches. Otherwise, return + NULL. */ + +static struct i386_insn * +i386_match_insn (CORE_ADDR pc, struct i386_insn *skip_insns) +{ + struct i386_insn *insn; + unsigned char op; + + op = read_memory_unsigned_integer (pc, 1); + + for (insn = skip_insns; insn->len > 0; insn++) + { + if ((op & insn->mask[0]) == insn->insn[0]) + { + unsigned char buf[I386_MAX_INSN_LEN - 1]; + size_t i; + + gdb_assert (insn->len > 1); + gdb_assert (insn->len <= I386_MAX_INSN_LEN); + + read_memory (pc + 1, buf, insn->len - 1); + for (i = 1; i < insn->len; i++) + { + if ((buf[i - 1] & insn->mask[i]) != insn->insn[i]) + break; + + return insn; + } + } + } + + return NULL; +} + +/* Some special instructions that might be migrated by GCC into the + part of the prologue that sets up the new stack frame. Because the + stack frame hasn't been setup yet, no registers have been saved + yet, and only the scratch registers %eax, %ecx and %edx can be + touched. */ + +struct i386_insn i386_frame_setup_skip_insns[] = +{ + /* Check for `movb imm8, r' and `movl imm32, r'. + + ??? Should we handle 16-bit operand-sizes here? */ + + /* `movb imm8, %al' and `movb imm8, %ah' */ + /* `movb imm8, %cl' and `movb imm8, %ch' */ + { 2, { 0xb0, 0x00 }, { 0xfa, 0x00 } }, + /* `movb imm8, %dl' and `movb imm8, %dh' */ + { 2, { 0xb2, 0x00 }, { 0xfb, 0x00 } }, + /* `movl imm32, %eax' and `movl imm32, %ecx' */ + { 5, { 0xb8 }, { 0xfe } }, + /* `movl imm32, %edx' */ + { 5, { 0xba }, { 0xff } }, + + /* Check for `mov imm32, r32'. Note that there is an alternative + encoding for `mov m32, %eax'. + + ??? Should we handle SIB adressing here? + ??? Should we handle 16-bit operand-sizes here? */ + + /* `movl m32, %eax' */ + { 5, { 0xa1 }, { 0xff } }, + /* `movl m32, %eax' and `mov; m32, %ecx' */ + { 6, { 0x89, 0x05 }, {0xff, 0xf7 } }, + /* `movl m32, %edx' */ + { 6, { 0x89, 0x15 }, {0xff, 0xff } }, + + /* Check for `xorl r32, r32' and the equivalent `subl r32, r32'. + Because of the symmetry, there are actually two ways to encode + these instructions; opcode bytes 0x29 and 0x2b for `subl' and + opcode bytes 0x31 and 0x33 for `xorl'. */ + + /* `subl %eax, %eax' */ + { 2, { 0x29, 0xc0 }, { 0xfd, 0xff } }, + /* `subl %ecx, %ecx' */ + { 2, { 0x29, 0xc9 }, { 0xfd, 0xff } }, + /* `subl %edx, %edx' */ + { 2, { 0x29, 0xd2 }, { 0xfd, 0xff } }, + /* `xorl %eax, %eax' */ + { 2, { 0x31, 0xc0 }, { 0xfd, 0xff } }, + /* `xorl %ecx, %ecx' */ + { 2, { 0x31, 0xc9 }, { 0xfd, 0xff } }, + /* `xorl %edx, %edx' */ + { 2, { 0x31, 0xd2 }, { 0xfd, 0xff } }, + { 0 } +}; + /* Check whether PC points at a code that sets up a new stack frame. If so, it updates CACHE and returns the address of the first - instruction after the sequence that sets removes the "hidden" - argument from the stack or CURRENT_PC, whichever is smaller. - Otherwise, return PC. */ + instruction after the sequence that sets up the frame or LIMIT, + whichever is smaller. If we don't recognize the code, return PC. */ static CORE_ADDR -i386_analyze_frame_setup (CORE_ADDR pc, CORE_ADDR current_pc, +i386_analyze_frame_setup (CORE_ADDR pc, CORE_ADDR limit, struct i386_frame_cache *cache) { + struct i386_insn *insn; unsigned char op; int skip = 0; - if (current_pc <= pc) - return current_pc; + if (limit <= pc) + return limit; op = read_memory_unsigned_integer (pc, 1); @@ -496,87 +598,48 @@ i386_analyze_frame_setup (CORE_ADDR pc, CORE_ADDR current_pc, starts this instruction sequence. */ cache->saved_regs[I386_EBP_REGNUM] = 0; cache->sp_offset += 4; + pc++; /* If that's all, return now. */ - if (current_pc <= pc + 1) - return current_pc; - - op = read_memory_unsigned_integer (pc + 1, 1); + if (limit <= pc) + return limit; /* Check for some special instructions that might be migrated by - GCC into the prologue. At this point in the prologue, code - should only touch the scratch registers %eax, %ecx and %edx, - so we check for - - movl $XXX, %eax - movl $XXX, %ecx - movl $XXX, %edx - - These instructions have opcodes 0xb8, 0xb9 and 0xba. - - We also check for - - xorl %eax, %eax - xorl %ecx, %ecx - xorl %edx, %edx - - and the equivalent - - subl %eax, %eax - subl %ecx, %ecx - subl %edx, %edx - - Because of the symmetry, there are actually two ways to - encode these instructions; with opcode bytes 0x29 and 0x2b - for `subl' and opcode bytes 0x31 and 0x33 for `xorl'. + GCC into the prologue and skip them. At this point in the + prologue, code should only touch the scratch registers %eax, + %ecx and %edx, so while the number of posibilities is sheer, + it is limited. Make sure we only skip these instructions if we later see the `movl %esp, %ebp' that actually sets up the frame. */ - while ((op >= 0xb8 && op <= 0xba) - || op == 0x29 || op == 0x2b - || op == 0x31 || op == 0x33) + while (pc + skip < limit) { - if (op >= 0xb8 && op <= 0xba) - { - /* Skip the `movl' instructions cited above. */ - skip += 5; - } - else - { - /* Skip the `subl' and `xorl' instructions cited above. */ - op = read_memory_unsigned_integer (pc + skip + 2, 1); - switch (op) - { - case 0xc0: /* %eax */ - case 0xc9: /* %ecx */ - case 0xd2: /* %edx */ - skip += 2; - break; - default: - return pc + 1; - } - } + insn = i386_match_insn (pc + skip, i386_frame_setup_skip_insns); + if (insn == NULL) + break; - /* If that's all, return now. */ - if (current_pc <= pc + skip + 1) - return current_pc; - - op = read_memory_unsigned_integer (pc + skip + 1, 1); + skip += insn->len; } + /* If that's all, return now. */ + if (limit <= pc + skip) + return limit; + + op = read_memory_unsigned_integer (pc + skip, 1); + /* Check for `movl %esp, %ebp' -- can be written in two ways. */ switch (op) { case 0x8b: - if (read_memory_unsigned_integer (pc + skip + 2, 1) != 0xec) - return pc + 1; + if (read_memory_unsigned_integer (pc + skip + 1, 1) != 0xec) + return pc; break; case 0x89: - if (read_memory_unsigned_integer (pc + skip + 2, 1) != 0xe5) - return pc + 1; + if (read_memory_unsigned_integer (pc + skip + 1, 1) != 0xe5) + return pc; break; default: - return pc + 1; + return pc; } /* OK, we actually have a frame. We just don't know how large @@ -584,11 +647,11 @@ i386_analyze_frame_setup (CORE_ADDR pc, CORE_ADDR current_pc, necessary. We also now commit to skipping the special instructions mentioned before. */ cache->locals = 0; - pc += skip; + pc += (skip + 2); /* If that's all, return now. */ - if (current_pc <= pc + 3) - return current_pc; + if (limit <= pc) + return limit; /* Check for stack adjustment @@ -596,37 +659,37 @@ i386_analyze_frame_setup (CORE_ADDR pc, CORE_ADDR current_pc, NOTE: You can't subtract a 16-bit immediate from a 32-bit reg, so we don't have to worry about a data16 prefix. */ - op = read_memory_unsigned_integer (pc + 3, 1); + op = read_memory_unsigned_integer (pc, 1); if (op == 0x83) { /* `subl' with 8-bit immediate. */ - if (read_memory_unsigned_integer (pc + 4, 1) != 0xec) + if (read_memory_unsigned_integer (pc + 1, 1) != 0xec) /* Some instruction starting with 0x83 other than `subl'. */ - return pc + 3; + return pc; - /* `subl' with signed byte immediate (though it wouldn't make - sense to be negative). */ - cache->locals = read_memory_integer (pc + 5, 1); - return pc + 6; + /* `subl' with signed 8-bit immediate (though it wouldn't + make sense to be negative). */ + cache->locals = read_memory_integer (pc + 2, 1); + return pc + 3; } else if (op == 0x81) { /* Maybe it is `subl' with a 32-bit immediate. */ - if (read_memory_unsigned_integer (pc + 4, 1) != 0xec) + if (read_memory_unsigned_integer (pc + 1, 1) != 0xec) /* Some instruction starting with 0x81 other than `subl'. */ - return pc + 3; + return pc; /* It is `subl' with a 32-bit immediate. */ - cache->locals = read_memory_integer (pc + 5, 4); - return pc + 9; + cache->locals = read_memory_integer (pc + 2, 4); + return pc + 6; } else { /* Some instruction other than `subl'. */ - return pc + 3; + return pc; } } - else if (op == 0xc8) /* enter $XXX */ + else if (op == 0xc8) /* enter */ { cache->locals = read_memory_unsigned_integer (pc + 1, 2); return pc + 4;