From: Jim Kingdon Date: Thu, 15 Apr 1993 00:33:51 +0000 (+0000) Subject: minor xcoff changes X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=3a8bc841b021e54edcf9c675fb67395d1daa2c64;p=binutils-gdb.git minor xcoff changes --- diff --git a/gdb/doc/ChangeLog b/gdb/doc/ChangeLog index fb472ba2cca..5fba6c864cf 100644 --- a/gdb/doc/ChangeLog +++ b/gdb/doc/ChangeLog @@ -1,3 +1,7 @@ +Wed Apr 14 17:31:00 1993 Jim Kingdon (kingdon@cygnus.com) + + * gdbint.texinfo: Minor xcoff stuff. + Wed Apr 7 14:11:07 1993 Fred Fish (fnf@cygnus.com) * gdbint.texinfo: Update for new config directory structure. diff --git a/gdb/doc/gdbint.texinfo b/gdb/doc/gdbint.texinfo index 3578ef14a92..708b5d2622b 100644 --- a/gdb/doc/gdbint.texinfo +++ b/gdb/doc/gdbint.texinfo @@ -76,6 +76,7 @@ GDB as you discover it (or as you design changes to GDB). * Languages:: Defining New Source Languages * Releases:: Configuring GDB for Release * Partial Symbol Tables:: How GDB reads symbols quickly at startup +* Types:: How GDB keeps track of types * BFD support for GDB:: How BFD and GDB interface * Symbol Reading:: Defining New Symbol Readers * Cleanups:: Cleanups @@ -147,9 +148,9 @@ conventions. Host-Dependent Files @table @file -@item config/*.mh +@item config/*/*.mh Sets Makefile parameters -@item xm-*.h +@item config/*/xm-*.h Global #include's and #define's and definitions @item *-xdep.c Global variables and functions @@ -157,9 +158,9 @@ Global variables and functions Native-Dependent Files @table @file -@item config/*.mh +@item config/*/*.mh Sets Makefile parameters (for @emph{both} host and native) -@item nm-*.h +@item config/*/nm-*.h #include's and #define's and definitions. This file is only included by the small number of modules that need it, so beware of doing feature-test #define's from its macros. @@ -169,9 +170,9 @@ global variables and functions Target-Dependent Files @table @file -@item config/*.mt +@item config/*/*.mt Sets Makefile parameters -@item tm-*.h +@item config/*/tm-*.h Global #include's and #define's and definitions @item *-tdep.c Global variables and functions @@ -180,7 +181,7 @@ Global variables and functions At this writing, most supported hosts have had their host and native dependencies sorted out properly. There are a few stragglers, which can be recognized by the absence of NATDEPFILES lines in their -@file{config/*.mh}. +@file{config/*/*.mh}. @node Config @chapter Adding a New Configuration @@ -277,7 +278,7 @@ and @pxref{Native,,Adding a New Native Configuration} Several files control GDB's configuration for host systems: @table @file -@item gdb/config/mh-@var{xxx} +@item gdb/config/@var{arch}/@var{xxx}.mh Specifies Makefile fragments needed when hosting on machine @var{xxx}. In particular, this lists the required machine-dependent object files, by defining @samp{XDEPFILES=@dots{}}. Also @@ -287,7 +288,7 @@ specifies the header file which describes host @var{xxx}, by defining @samp{XM_ADD_FILES}, @samp{XM_CLIBS}, @samp{XM_CDEPS}, etc.; see @file{Makefile.in}. -@item gdb/xm-@var{xxx}.h +@item gdb/config/@var{arch}/xm-@var{xxx}.h (@file{xm.h} is a link to this file, created by configure). Contains C macro definitions describing the host system environment, such as byte order, host C compiler and library, ptrace support, @@ -360,7 +361,7 @@ plenty more work to do. Several files control GDB's configuration for native support: @table @file -@item gdb/config/@var{xxx}.mh +@item gdb/config/@var{xarch}/@var{xxx}.mh Specifies Makefile fragments needed when hosting @emph{or native} on machine @var{xxx}. In particular, this lists the required native-dependent object files, @@ -371,7 +372,7 @@ You can also define @samp{NAT_CFLAGS}, @samp{NAT_ADD_FILES}, @samp{NAT_CLIBS}, @samp{NAT_CDEPS}, etc.; see @file{Makefile.in}. -@item gdb/nm-@var{xxx}.h +@item gdb/config/@var{arch}/nm-@var{xxx}.h (@file{nm.h} is a link to this file, created by configure). Contains C macro definitions describing the native system environment, such as child process control and core file support. @@ -479,7 +480,7 @@ target is the same as your new host, you've probably already done that. A variety of files specify attributes of the GDB target environment: @table @file -@item gdb/config/@var{ttt}.mt +@item gdb/config/@var{arch}/@var{ttt}.mt Contains a Makefile fragment specific to this target. Specifies what object files are needed for target @var{ttt}, by defining @samp{TDEPFILES=@dots{}}. @@ -488,7 +489,7 @@ Also specifies the header file which describes @var{ttt}, by defining @samp{TM_CLIBS}, @samp{TM_CDEPS}, and other Makefile variables here; see @file{Makefile.in}. -@item gdb/tm-@var{ttt}.h +@item gdb/config/@var{arch}/tm-@var{ttt}.h (@file{tm.h} is a link to this file, created by configure). Contains macro definitions about the target machine's registers, stack frame format and instructions. @@ -523,7 +524,7 @@ it is only included in one place. @file{@var{arch}-opcode.h} is shared between the debugger and the assembler, if the GNU assembler has been ported to the target machine. -@item gdb/tm-@var{arch}.h +@item gdb/config/@var{arch}/tm-@var{arch}.h This often exists to describe the basic layout of the target machine's processor chip (registers, stack, etc). If used, it is included by @file{tm-@var{xxx}.h}. It can @@ -806,6 +807,37 @@ are allocated in a pair of large arrays on an obstack, so there is little to be gained by trying to free them unless you want to do a lot more work. +@node Types +@chapter Types + +Fundamental Types (e.g., FT_VOID, FT_BOOLEAN). + +These are the fundamental types that gdb uses internally. Fundamental +types from the various debugging formats (stabs, ELF, etc) are mapped into +one of these. They are basically a union of all fundamental types that +gdb knows about for all the languages that gdb knows about. + +Type Codes (e.g., TYPE_CODE_PTR, TYPE_CODE_ARRAY). + +Each time gdb builds an internal type, it marks it with one of these +types. The type may be a fundamental type, such as TYPE_CODE_INT, or +a derived type, such as TYPE_CODE_PTR which is a pointer to another +type. Typically, several FT_* types map to one TYPE_CODE_* type, and +are distinguished by other members of the type struct, such as whether +the type is signed or unsigned, and how many bits it uses. + +Builtin Types (e.g., builtin_type_void, builtin_type_char). + +These are instances of type structs that roughly correspond to fundamental +types and are created as global types for gdb to use for various ugly +historical reasons. We eventually want to eliminate these. Note for +example that builtin_type_int initialized in gdbtypes.c is basically the +same as a TYPE_CODE_INT type that is initialized in c-lang.c for an +FT_INTEGER fundamental type. The difference is that the builtin_type is +not associated with any particular objfile, and only one instance exists, +while c-lang.c builds as many TYPE_CODE_INT types as needed, with each +one associated with some particular objfile. + @node BFD support for GDB @chapter Binary File Descriptor Library Support for GDB @@ -1361,9 +1393,9 @@ solib.c @item BLOCK_ADDRESS_ABSOLUTE dbxread.c @item BPT_VECTOR -tm-68k.h +tm-m68k.h @item BREAKPOINT -tm-68k.h +tm-m68k.h @item BREAKPOINT_DEBUG breakpoint.c @item BROKEN_LARGE_ALLOCA @@ -1406,8 +1438,6 @@ infrun.c regex.c @item C_GLBLREG coffread.c -@item DAMON -xcoffexec.c @item DBXREAD_ONLY partial-stab.h @item DBX_PARM_SYMBOL_CLASS @@ -1441,7 +1471,7 @@ dbxread.c @item EXTERN buildsym.h @item EXTRACT_RETURN_VALUE -tm-68k.h +tm-m68k.h @item EXTRACT_STRUCT_VALUE_ADDRESS values.c @item EXTRA_FRAME_INFO @@ -1477,7 +1507,7 @@ stack.c @item FRAME_GET_BASEREG_VALUE frame.h @item FRAME_NUM_ARGS -tm-68k.h +tm-m68k.h @item FRAME_SPECIFICATION_DYADIC stack.c @item FUNCTION_EPILOGUE_SIZE @@ -1637,8 +1667,6 @@ remote-adapt.c remote-mm.c @item NOTICE_SIGNAL_HANDLING_CHANGE infrun.c -@item NO_DEFINE_SYMBOL -xcoffread.c @item NO_HIF_SUPPORT remote-mm.c @item NO_JOB_CONTROL @@ -1652,7 +1680,7 @@ library can't cope with our redefinition of @code{malloc} to call @code{mmalloc}. When defining @code{NO_MMALLOC}, you will also have to override the setting of @code{MMALLOC_LIB} to empty, in the Makefile. Therefore, this define is usually set on the command line by overriding -@code{MMALLOC_DISABLE} in @file{config/*.mh}, rather than by defining +@code{MMALLOC_DISABLE} in @file{config/*/*.mh}, rather than by defining it in @file{xm-*.h}. @item NO_MMALLOC_CHECK Define this if you are using @code{mmalloc}, but don't want the overhead @@ -1661,10 +1689,6 @@ of checking the heap with @code{mmcheck}. remote-adapt.c @item NO_SINGLE_STEP infptrace.c -@item NO_TYPEDEFS -xcoffread.c -@item NO_TYPEDEFS -xcoffread.c @item NPC_REGNUM infcmd.c @item NS32K_SVC_IMMED_OPERANDS @@ -1755,7 +1779,7 @@ regex.c @item SIGTRAP_STOP_AFTER_LOAD infrun.c @item SKIP_PROLOGUE -tm-68k.h +tm-m68k.h @item SKIP_PROLOGUE_FRAMELESS_P blockframe.c @item SKIP_TRAMPOLINE_CODE @@ -1777,7 +1801,7 @@ infrun.c @item STOP_SIGNAL main.c @item STORE_RETURN_VALUE -tm-68k.h +tm-m68k.h @item SUN4_COMPILER_FEATURE infrun.c @item SUN_FIXED_LBRAC_BUG @@ -1964,9 +1988,9 @@ solib.c @item BLOCK_ADDRESS_ABSOLUTE dbxread.c @item BPT_VECTOR -tm-68k.h +tm-m68k.h @item BREAKPOINT -tm-68k.h +tm-m68k.h @item BREAKPOINT_DEBUG breakpoint.c @item BSTRING @@ -2003,8 +2027,6 @@ infrun.c regex.c @item C_GLBLREG coffread.c -@item DAMON -xcoffexec.c @item DBXREAD_ONLY partial-stab.h @item DBX_PARM_SYMBOL_CLASS @@ -2038,7 +2060,7 @@ dbxread.c @item EXTERN buildsym.h @item EXTRACT_RETURN_VALUE -tm-68k.h +tm-m68k.h @item EXTRACT_STRUCT_VALUE_ADDRESS values.c @item EXTRA_FRAME_INFO @@ -2076,7 +2098,7 @@ stack.c @item FRAME_GET_BASEREG_VALUE frame.h @item FRAME_NUM_ARGS -tm-68k.h +tm-m68k.h @item FRAME_SPECIFICATION_DYADIC stack.c @item FUNCTION_EPILOGUE_SIZE @@ -2228,8 +2250,6 @@ remote-adapt.c remote-mm.c @item NOTICE_SIGNAL_HANDLING_CHANGE infrun.c -@item NO_DEFINE_SYMBOL -xcoffread.c @item NO_HIF_SUPPORT remote-mm.c @item NO_SIGINTERRUPT @@ -2237,9 +2257,8 @@ remote-adapt.c @item NO_SINGLE_STEP infptrace.c @item NO_TYPEDEFS -xcoffread.c -@item NO_TYPEDEFS -xcoffread.c +xcoffread.c--This causes types not to be read, to save memory and speed +things up. @item NPC_REGNUM infcmd.c @item NS32K_SVC_IMMED_OPERANDS @@ -2313,7 +2332,7 @@ regex.c @item SIGTRAP_STOP_AFTER_LOAD infrun.c @item SKIP_PROLOGUE -tm-68k.h +tm-m68k.h @item SKIP_PROLOGUE_FRAMELESS_P blockframe.c @item SKIP_TRAMPOLINE_CODE @@ -2335,7 +2354,7 @@ infrun.c @item STOP_SIGNAL main.c @item STORE_RETURN_VALUE -tm-68k.h +tm-m68k.h @item SUN4_COMPILER_FEATURE infrun.c @item SUN_FIXED_LBRAC_BUG @@ -2535,12 +2554,13 @@ symbols are dbx-style stabs whose strings are located in the indicated with a @samp{C_FILE} symbol (.file) which is analogous to @samp{N_SO}; include files are delimited with @samp{C_BINCL} (.bi) and @samp{C_EINCL} (.ei) which correspond to @samp{N_SOL} rather than Sun's -@samp{N_BINCL}. The values of the @samp{C_BINCL} and @samp{C_EINCL} -symbols are offsets into the executable file which point to the -beginning and the end of the portion of the linetable which correspond -to this include file (warning: C_EINCL is @emph{inclusive} not exclusive -like most end of something pointers). Other differences from standard -stabs include the use of negative type numbers for builtin types. +@samp{N_BINCL} (that is, they don't nest and there is no equivalent to +N_EXCL). The values of the @samp{C_BINCL} and @samp{C_EINCL} symbols +are offsets into the executable file which point to the beginning and +the end of the portion of the linetable which correspond to this include +file (warning: C_EINCL is inclusive not exclusive like most end of +something pointers). Other differences from standard stabs include the +use of negative type numbers for builtin types. The shared library scheme has a nice clean interface for figuring out what shared libraries are in use, but the catch is that everything which