From: Stu Grossman Date: Mon, 3 Apr 1995 21:03:27 +0000 (+0000) Subject: * monitor.h: Add MO_GETMEM_NEEDS_RANGE flag. X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=3da4297eae24611c779264c25d14d10977a503db;p=binutils-gdb.git * monitor.h: Add MO_GETMEM_NEEDS_RANGE flag. * monitor.c (monitor_read_memory): Use previously mentioned flag to send proper format memory examine commands to the w89k monitor. Also, try to handle bizarre format of memory dump... * op50-rom.c w89k-rom.c: Update to new monitor.[ch] conventions. --- diff --git a/gdb/monitor.h b/gdb/monitor.h index 1bd4b7cd81b..6d8ae486f87 100644 --- a/gdb/monitor.h +++ b/gdb/monitor.h @@ -125,6 +125,7 @@ struct monitor_ops #define MO_NEED_REGDUMP_AFTER_CONT 0x4 /* If set, then monitor doesn't auto- matically supply register dump when coming back after a continue. */ +#define MO_GETMEM_NEEDS_RANGE 0x8 /* getmem needs start addr and end addr */ extern struct monitor_ops *current_monitor; diff --git a/gdb/op50-rom.c b/gdb/op50-rom.c index 5d3b228b0c6..0cfb4b289d5 100644 --- a/gdb/op50-rom.c +++ b/gdb/op50-rom.c @@ -22,9 +22,9 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include "gdbcore.h" #include "target.h" #include "monitor.h" +#include "serial.h" -void op50n_open(); -void monitor_open(); +static void op50n_open PARAMS ((char *args, int from_tty)); /* * this array of registers need to match the indexes used by GDB. The @@ -32,24 +32,17 @@ void monitor_open(); * different strings than GDB does, and doesn't support all the * registers either. So, typing "info reg sp" becomes a "r30". */ -static char *op50n_regnames[] = { - "r0", "r1", "r2", "r3", "r4", "r5", "r6", - "r7", "r8", "r9", "r10", "r11", "r12", "r13", - "r14", "r15", "r16", "r17", "r18", "r19", "r20", - "r21", "r22", "r23", "r24", "r25", "r26", "r27", - "r28", "r29", "r30", "r31", "cr11","p", "", - "", "", "cr15", "cr19", "cr20", "cr21", "cr22", - "", "", "", "", "", "", "", - "", "", "cr0", "cr8", "cr9", "cr10","cr12", "cr13", - "cr24", "cr25", "cr26", "", "", "", "", - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "" + +static char *op50n_regnames[NUM_REGS] = +{ + "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", + "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15", + "r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23", + "r24", "r25", "r26", "r27", "r28", "r29", "r30", "r31", + "cr11", "p", NULL, NULL, NULL, "cr15", "cr19", "cr20", + "cr21", "cr22", NULL, NULL, NULL, NULL, NULL, NULL, + NULL, NULL, NULL, "cr0", "cr8", "cr9", "cr10","cr12", + "cr13", "cr24", "cr25", "cr26", }; /* @@ -58,98 +51,73 @@ static char *op50n_regnames[] = { * strings. We also need a CR or LF on the end. */ -static struct target_ops op50n_ops = -{ - "op50n", - "Oki's debug monitor for the Op50n Eval board", - - "Debug on a Oki OP50N eval board.\n\ -Specify the serial device it is connected to (e.g. /dev/ttya).", - op50n_open, - monitor_close, - NULL, - monitor_detach, - monitor_resume, - monitor_wait, - monitor_fetch_register, - monitor_store_register, - monitor_prepare_to_store, - monitor_xfer_inferior_memory, - monitor_files_info, - monitor_insert_breakpoint, - monitor_remove_breakpoint, /* Breakpoints */ - 0, - 0, - 0, - 0, - 0, /* Terminal handling */ - monitor_kill, - monitor_load, /* load */ - 0, /* lookup_symbol */ - monitor_create_inferior, - monitor_mourn_inferior, - 0, /* can_run */ - 0, /* notice_signals */ - 0, /* to_stop */ - process_stratum, - 0, /* next */ - 1, - 1, - 1, - 1, - 1, /* all mem, mem, stack, regs, exec */ - 0, - 0, /* Section pointers */ - OPS_MAGIC, /* Always the last thing */ -}; +static struct target_ops op50n_ops; -static char *op50n_loadtype[] = {"none", "srec", "default", NULL}; +static char *op50n_loadtypes[] = {"none", "srec", "default", NULL}; static char *op50n_loadprotos[] = {"none", NULL}; +static char *op50n_inits[] = {"\003.\n", NULL}; + static struct monitor_ops op50n_cmds = { - 1, /* 1 for ASCII, 0 for binary */ - "\003.\n", /* monitor init string */ - "g %x\n", /* execute or usually GO command */ - "g\n", /* continue command */ - "t\n", /* single step */ - "b %x\n", /* set a breakpoint */ - "bx %x\n", /* clear a breakpoint */ - 0, /* 0 for number, 1 for address */ + 0, /* flags */ + op50n_inits, /* Init strings */ + "g\n", /* continue command */ + "t\n", /* single step */ + NULL, /* Interrupt char */ + "b %x\n", /* set a breakpoint */ + "bx %x\n", /* clear a breakpoint */ + NULL, /* clear all breakpoints */ + NULL, /* memory fill cmd */ { - "sx %x %x;.\n", /* set memory */ - "", /* delimiter */ - "", /* the result */ + "sx %x %x;.\n", /* setmem.cmdb (addr, value) */ + NULL, /* setmem.cmdw (addr, value) */ + NULL, /* setmem.cmdl (addr, value) */ + NULL, /* setmem.cmdll (addr, value) */ + NULL, /* setreg.resp_delim */ + NULL, /* setreg.term */ + NULL, /* setreg.term_cmd */ }, { - "sx %x\n", /* get memory */ - ": ", /* delimiter */ - " ", /* the result */ + "sx %x\n", /* getmem.cmdb (addr, value) */ + NULL, /* getmem.cmdw (addr, value) */ + NULL, /* getmem.cmdl (addr, value) */ + NULL, /* getmem.cmdll (addr, value) */ + ": ", /* getmem.resp_delim */ + NULL, /* getmem.term */ + NULL, /* getmem.term_cmd */ }, { - "x %s %x\n", /* set a register */ - "", /* delimiter between registers */ - "", /* the result */ + "x %s %x\n", /* setreg.cmd (name, value) */ + NULL, /* setreg.resp_delim */ + NULL, /* setreg.term */ + NULL, /* setreg.term_cmd */ }, { - "x %s\n", /* get a register */ - "=", /* delimiter between registers */ - "", /* the result */ + "x %s\n", /* getreg.cmd (name) */ + "=", /* getreg.resp_delim */ + NULL, /* getreg.term */ + NULL, /* getreg.term_cmd */ }, - "r 0\n", /* download command */ - "#", /* monitor command prompt */ - " ", /* end-of-command delimitor */ - ".\n", /* optional command terminator */ - &op50n_ops, /* target operations */ + NULL, /* dump_registers */ + NULL, /* register_pattern */ + NULL, /* supply_register */ + "r 0\n", /* download command */ + NULL, /* load response */ + "#", /* monitor command prompt */ + NULL, /* end-of-command delimitor */ + NULL, /* optional command terminator */ + &op50n_ops, /* target operations */ op50n_loadtypes, /* loadtypes */ op50n_loadprotos, /* loadprotos */ "2400,4800,9600,19200,exta,38400,extb", /* supported baud rates */ SERIAL_1_STOPBITS, /* number of stop bits */ - op50n_regnames -}; + op50n_regnames, /* register names */ + MONITOR_OPS_MAGIC /* magic */ + }; -void -op50n_open(args, from_tty) +static void +op50n_open (args, from_tty) char *args; int from_tty; { @@ -159,10 +127,13 @@ op50n_open(args, from_tty) void _initialize_op50n () { - add_target (&op50n_ops); + init_monitor_ops (&op50n_ops); - /* this is the default, since it's that's how the board comes up after - power cycle. It can then be changed using set remotebaud - */ - baud_rate = 9600; + op50n_ops.to_shortname = "op50n"; + op50n_ops.to_longname = "Oki's debug monitor for the Op50n Eval board"; + op50n_ops.to_doc = "Debug on a Oki OP50N eval board.\n\ +Specify the serial device it is connected to (e.g. /dev/ttya)."; + op50n_ops.to_open = op50n_open; + + add_target (&op50n_ops); } diff --git a/gdb/w89k-rom.c b/gdb/w89k-rom.c index 64bc5fad887..031eee297b0 100644 --- a/gdb/w89k-rom.c +++ b/gdb/w89k-rom.c @@ -1,5 +1,5 @@ /* Remote target glue for the WinBond ROM monitor running on the "Cougar" -W89k eval board. + W89k eval board. Copyright 1988, 1991, 1992, 1993, 1994 Free Software Foundation, Inc. @@ -23,11 +23,9 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include "gdbcore.h" #include "target.h" #include "monitor.h" +#include "serial.h" -extern int baud_rate; - -void w89k_open(); -void monitor_open(); +static void w89k_open PARAMS ((char *args, int from_tty)); /* * this array of registers need to match the indexes used by GDB. The @@ -35,22 +33,16 @@ void monitor_open(); * different strings than GDB does, and doesn't support all the * registers either. So, typing "info reg sp" becomes a "r30". */ -static char *w89k_regnames[] = { - "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", "r8", "r9", - "r10", "r11", "r12", "r13", "r14", "r15", "r16", "r17", "r18", "r19", - "r20", "r21", "r22", "r23", "r24", "r25", "r26", "r27", "r28", "r29", - "r30", "r31", "sar", "pc", "", "", "", - "eiem", "iir", "iva", "ior", "ipsw","", "", "", "", "", - "", "", "", "", "", "", "", "ccr", "", "", - "tr0", "tr1", "", "", "", "", "", - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "" +static char *w89k_regnames[NUM_REGS] = +{ + "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", + "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15", + "r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23", + "r24", "r25", "r26", "r27", "r28", "r29", "r30", "r31", + "SAR", "PC", NULL, NULL, NULL, "EIEM", "IIR", "IVA", + "IOR", "IPSW", NULL, NULL, NULL, NULL, NULL, + NULL, NULL, NULL, NULL, NULL, NULL, NULL, + "CCR", NULL, NULL, "TR0", "TR1", }; /* @@ -59,94 +51,70 @@ static char *w89k_regnames[] = { * strings. We also need a CR or LF on the end. */ -static struct target_ops w89k_ops = -{ - "w89k", - "WinBond's debug monitor for the W89k Eval board", - "Debug on a WinBond W89K eval board.\n\ -Specify the serial device it is connected to (e.g. /dev/ttya).", - w89k_open, - monitor_close, - NULL, - monitor_detach, - monitor_resume, - monitor_wait, - monitor_fetch_register, - monitor_store_register, - monitor_prepare_to_store, - monitor_xfer_inferior_memory, - monitor_files_info, - monitor_insert_breakpoint, - monitor_remove_breakpoint, /* Breakpoints */ - 0, - 0, - 0, - 0, - 0, /* Terminal handling */ - monitor_kill, - monitor_load, /* load */ - 0, /* lookup_symbol */ - monitor_create_inferior, - monitor_mourn_inferior, - 0, /* can_run */ - 0, /* notice_signals */ - 0, /* to_stop */ - process_stratum, - 0, /* next */ - 1, - 1, - 1, - 1, - 1, /* all mem, mem, stack, regs, exec */ - 0, - 0, /* Section pointers */ - OPS_MAGIC, /* Always the last thing */ -}; +static struct target_ops w89k_ops; + +static char *w89k_loadtypes[] = {"none", "srec", "default", NULL}; +static char *w89k_loadprotos[] = {"none", "xmodem", NULL}; -static char *loadtypes[] = {"none", "srec", "default", NULL}; -static char *loadprotos[] = {"none", "xmodem", NULL}; +static char *w89k_inits[] = {"\r", NULL}; static struct monitor_ops w89k_cmds = { - 1, /* 1 for ASCII, 0 for binary */ - "\n", /* monitor init string */ - "g = %x\n", /* execute or usually GO command */ - "g\n", /* continue command */ - "t\n", /* single step */ - "bp %x\n", /* set a breakpoint */ - "bc %x\n", /* clear a breakpoint */ - 0, /* 0 for number, 1 for address */ + MO_GETMEM_NEEDS_RANGE, /* flags */ + w89k_inits, /* Init strings */ + "g\r", /* continue command */ + "t\r", /* single step */ + NULL, /* Interrupt char */ + "bp %x\r", /* set a breakpoint */ + "bc %x\r", /* clear a breakpoint */ + NULL, /* clear all breakpoints */ + NULL, /* memory fill cmd */ { - "e %x %x\n", /* set memory */ - "", /* delimiter */ - "", /* the result */ + "eb %x %x\r", /* setmem.cmdb (addr, value) */ + "eh %x %x\r", /* setmem.cmdw (addr, value) */ + "ew %x %x\r", /* setmem.cmdl (addr, value) */ + NULL, /* setmem.cmdll (addr, value) */ + NULL, /* setreg.resp_delim */ + NULL, /* setreg.term */ + NULL, /* setreg.term_cmd */ }, { - "db %x %x\n", /* get memory */ - "", /* delimiter */ - "", /* the result */ + "db %x %x\r", /* getmem.cmdb (startaddr, endaddr) */ + "dh %x %x\r", /* getmem.cmdw (startaddr, endaddr) */ + "dw %x %x\r", /* getmem.cmdl (startaddr, endaddr) */ + NULL, /* getmem.cmdll (startaddr, endaddr) */ + " ", /* getmem.resp_delim */ + NULL, /* getmem.term */ + NULL, /* getmem.term_cmd */ }, { - "r %s %x\n", /* set a register */ - "", /* delimiter between registers */ - "", /* the result */ + "r %s %x\r", /* setreg.cmd (name, value) */ + NULL, /* setreg.resp_delim */ + NULL, /* setreg.term */ + NULL, /* setreg.term_cmd */ }, { - "r %s\n", /* get a register */ - "", /* delimiter between registers */ - "", /* the result */ + "r %s\r", /* getreg.cmd (name) */ + "\r", /* getreg.resp_delim */ + NULL, /* getreg.term */ + NULL, /* getreg.term_cmd */ }, - "u\n", /* download command */ - "ROM>", /* monitor command prompt */ - "", /* end-of-command delimitor */ - "", /* optional command terminator */ - &w89k_ops, /* target operations */ + NULL, /* dump_registers */ + NULL, /* register_pattern */ + NULL, /* supply_register */ + "u\r", /* download command */ + NULL, /* load response */ + "ROM>", /* monitor command prompt */ + NULL, /* end-of-command delimitor */ + NULL, /* optional command terminator */ + &w89k_ops, /* target operations */ w89k_loadtypes, /* loadtypes */ w89k_loadprotos, /* loadprotos */ - "9600", /* supported baud rates */ + "9600", /* supported baud rates */ SERIAL_1_STOPBITS, /* number of stop bits */ - w89k_regnames /* registers names */ -}; + w89k_regnames, /* register names */ + MONITOR_OPS_MAGIC /* magic */ + }; void w89k_open(args, from_tty) @@ -159,8 +127,13 @@ w89k_open(args, from_tty) void _initialize_w89k () { - add_target (&w89k_ops); + init_monitor_ops (&w89k_ops); - /* this is the default, since it's the only baud rate supported by the hardware */ - baud_rate = 9600; + w89k_ops.to_shortname = "w89k"; + w89k_ops.to_longname = "WinBond's debug monitor for the W89k Eval board"; + w89k_ops.to_doc = "Debug on a WinBond W89K eval board.\n\ +Specify the serial device it is connected to (e.g. /dev/ttya)."; + w89k_ops.to_open = w89k_open; + + add_target (&w89k_ops); }